STEINEL BHG 360 Li-Ion Cordless Hot Air Tool
STEINEL gives you mobility: With its powerful li-ion rechargeable battery, the cordless version of the practical HG 350 S provides ultimate freedom of movement for hot-air applicationseven at places without mains power. The formidable 36-volt li-ion power pack that drives the BHG 350 Li-Ion has a capacitance of 2600 mAh and delivers the energy for 15 minutes of unrestricted hot-air work. It has no memory effect and impresses with minimal selfdischarge. As a result, this hot air toolwhich provides the same temperature stages at its main-powered counterpartis immediately ready for operation even after a prolonged period out of use. The charge supplied with the tool recharges the battery to 75% capacity in just 30 mins and to full charge in 60 mins. Features
Lightweight, ergonomically optimised hot air tool Integrated LED light Integrated ring for hanging the tool Soft grip handle Thermal cut-out ESD Safe: suitable for use at places where there is a risk of electrostatic discharge Thermal-Signal temperature indicator

Setting capabilities

Three-stage switch for setting OFF/COLD/HOT
BHG 360 Li-Ion Cordless Hot Air Tool
Prod. No. Dimensions (h x w x d) Voltage Output Temperature 351052 Case 240 x 65 x 265 mm 36 V, rechargeable li-ion battery 300 W 400C without nozzle / 500C with 7mm reduction nozzle (included) 100 I/min 15 min LS-36 V 2.6 Ah 30 min (75%) 60 min (100%) Approx. 1790g (including rechargeable battery) 7mm reduction nozzle included Reduction nozzle with reflector guard Precision reflector nozzle 10 mm reflector nozzle 40 mm reflector nozzle Prod No. 077358 Prod No. 077457 Prod No. 077556 Prod No. 077655
Airflow rate Run time Charger Charging time Weight Accessories
Ideal for de-soldering electronic components
With optional reflector nozzle, ideal for shrinking cable sleeves
Conveniently positioned control switch for setting OFF/COLD/HOT
The ergonomically shaped soft grip handle ensures comfortable handling
The LED light always provides bright illumination in the work area and also serves as a telltale lamp
With its hanging rig, the BHG 350 Li-Ion is always in easy reach in extreme work situations
Optimised weight balance ensures fatigue-free working

Video Sensor SFV 360 IMPULSER, the new wireless family from STEINEL, is setting standards when it comes to security. The post-office approved wireless series unites the benefits of targeted surveillance by light and alarm with a maximum of convenience and efficiency. The transmitting and receiving units can be combined in any way to meet individual needs.
Video sensor SFV 360, white, with wireless monitor FEM 200
Technical specifications for SFV 360 Dimensions: (h x w x d)

116 X 95 X 70mm

Voltage:

230 V / 50 Hz

200 W max. (resistive load)
Video sensor SFV 360, black with wireless monitor FEM 200

Output:

Video sensor SFV 360 can be used to transform conventional lights into a reliable security system - effortlessly and without complication. This wireless video system utilises the benefits of progressive infrared sensor engineering and the very latest image transmission technology.

Power consumption:

3 watts max.

Sensor detection angle:

360 with 180 opening angle

Sensor reach:

1 - 12 m

Time setting:

30 sec. - 17 min.

Twilight setting:

approx. 2 - 2000 lux 1/3" CCD camera, functional down to 2 lux, focal length F= 2.5 (wideangle lens) 90 -21 vertically, 50 horizontally (with sensor unit) 2.4 - 2.5 GHz

Camera:

Cameral viewing angle:

Camera turning range:

Transmission frequency:

Channels:

2 approx. 200 m outdoors approx. 30 m indoors

Transmission range:

Enclosure:
Technical specifications for FEM 100 / FEM 200 Dimensions: (h x w x d)
200 x 195 x 250 mm Plug-in power supply unit, 230 V, 12 V 1.2 A 90 - 240 V~ / 50/60 Hz Activated by sensor in SFV 360/602/702 (an acoustic signals sounds) Continuous operation. An acoustic signal is additionally given when movement occurs inside the sensor detection zone Unit out of operation Socket for connecting VCR, composite video signal 1 Vpp to CCIR standard 2 (manual channel change)

STAND-BY:

DIN AV socket:
Picture tube: Power consumption (continuous operation / ON): Power consumption (STAND-BY):

7" (b/w)

25 watts max.

9.2 watts max.

(Head Office) Taybell Alarms Limited - The Security Centre - 5 Stonegate Road - Leeds - LS6 4HZ Tel. 4018 Fax. 6830