Service

D I CZ

STEINEL-Schnell-Service Dieselstrae Herzebrock-Clarholz Tel.: + 49/52 45/4 48-1 88
I. MLLER Peter-Paul-Str. 15 A-2201 Gerasdorf bei Wien Tel.: + 43/22 46/21 46
THOELKE DISTRIBUZIONE S.N.C. Via Adamello 15/17 I-22070 Locate Varesino (Como) Tel.: + 39/3 31/11 Fax: + 39/3 31/13
ELNAS s.r.o. Oblekovice 394 CZ-Znojmo Tel. +4 20/515/26 Fax: +4 20/515/25 e-mail: info@elnas.cz http://www.elnas.cz

NightMatic 3000

PUAG AG Oberebenestrasse 51 CH-5620 Bremgarten Tel.: + 41/56/88 55
SAET-94 S.L. Polig. Industrial Cova Solera C/Atenas, 5 E-08191 Rubi (Barcelona) Tel.: + 34/93/5 88-e-mail: saet94@retemail.es
LANGE UKASZUK Sp.j. Bykw 25a PL-55-095 Mirkw Tel.: + 48/71/Fax: + 48/71/08 02

D GB F NL I E S DK FIN N

STEINEL U. K. LTD. 37, Manasty Road Orton Southgate GB-Peterborough PE UP Tel.: + 44/17 33/2 38-2 65
SOCKET TOOL COMPANY 8, Queen Street IRL-Dublin 7
F. Fonseca, S.A. Estrada de Taboeira, 87/89-Esgueira, Apartado 3003 3801-997 AVEIRO Tel.: +3 51/2 34/00 Fax: +3 51/2 34/10 e-mail: ffonseca@ffonseca.com
KVARCAS 17-4 A. Mickeviciaus LT-3000 Kaunas Tel.: +3 70/37/23
FORTRONIC Plc. The str. 108 EST-50113 Tartu e-mail: fortrononline.ee
DUVAUCHEL S. A. 86/108 Avenue Louis Roche F-92230 Gennevilliers Cedex Tel.: + 33/040 e-mail:sav@duvauchel.fr
KARL H STRM AB Verktygsvgen 4 S-JNKPING Tel.: + 46/36/40
LOG Zabnica D.O.O. Podjetje Za Trgovino SLO-4209 Zabnica Tel.: +3 86/42/00
Bedienungsanleitung Operating instructions Mode demploi Gebruiksaanwijzing Istruzioni per luso Instrucciones de montaje Bruksanvisning Brugsanvisning Kyttohje Bruksanvisning
7216800 Technische nderungen vorbehalten.
HEGEMA PRESENT B. V. Christiaan Huygensstraat 4 NL-3291 CN Strijen Tel.: + 31/78/44 44
BROMMANN Ellegaardvej 18 DK-6400 Snderborg Tel.: + 45/Hedengren Yhtit Oy Hedtec Ab, Mnkimiehentie 4 FIN-02780 Espoo Tel.: +3 58/9/81 Fax: +3 58/9/18 hedtec@hedtec.fi www.hedtec.fi
PANOS Lingonis + Sons O. E. 8, Aristofanous GR-10554 Athens Tel.: + 32/10/20 21

AUS OFF

PRESENT Handel b.v.b.a. Toekomstlaan 6 Industriezone Wolfstee B-2200 Herentals Tel.: + 32/14/74
EGE SENSRL AYDINLATMA ITH. IHR. TIC. VE PAZ. Ltd. STI. Gersan Sanayi Sitesi 659 Sokak No. 510 TR-06370 Bati Sitesi (Ankara) Tel.: + 90/3 12/33

AUS / OFF

A. R. Tech. 70, Millewee Boite Postale 1044 L-1010 Luxembourg Tel.: +3 52/49/33 33
STAUBO ELEKTROMASKIN A. S. Tvetenveien 30 B N-0611 Oslo Tel.: + 47/89 00
KALEKIN s.r.l. Chorroarin 137 RA-1427 Buenos Aires Tel.: + 54/11/45 23-90 01
Installation instructions
STEINEL NightMatic 3000 Vario. Please familiarise yourself with these instructions before installation. We hope that you enjoy this high quality product.

Operation/ function

After the mains connection has been made, the connected consumer illuminates for approx. 8 seconds. drawing) with a ball-point pen or similar object and hold until the LED display switches on and off. Release the button. The surrounding light is recorded for approx. Light measurement is subsequently activated. 10 sec. (the connected consumer is switched off, if required). From now on, the light fixture will be switched on under these light conditions.
Dear customer, Thank you for the confidence that you have placed in us in purchasing your new

Twilight setting:

The factory-adjusted light threshold of approx. 1 lux can be modified inside the appliance as follows: at the desired switching brightness, press the button (refer to

Principle

The built-in photo-sensor records the brightness of the surroundings and switches the connected light fixture on when darkness falls, off again if required in night economy mode, and on again in the darker early morning hours.
Setting of night economy mode:
The light fixture can be switched off automatically during the night for additional energy savings. Use the control inside the unit for continuous adjustment. As supplied, the light switches itself off at approx. 1.30 a.m. The electronic system contains no clock. All the time values are calculated by the microprocessor according to the twilight conditions. In doing so, seasonal modifications in the light conditions are automatically taken into account.

Installation

on the housing, pierce the condensation water holes at the bottom.
(phase) (Phase) (neutral) (Nullleiter)
Connection The appliance has the following marked connections: N = neutral terminals (2 x, usually blue) L = phase terminal (usually black or brown) L = connection to the switched phase If in doubt, the cable must be identified with a voltage tester. The phase (L) and neutral (N) conductors are to be connected according to the terminal assignment. The service lead (light fixture) is connected to the second neutral terminal (N) and phase (L). Any green/yellow protective-earth conductors present must be secured to the clamp provided. Important: if the connections are reversed, this will cause a subsequent short circuit in the unit or your fuse box. In this case, the individual conductors must be reidentified and reinstalled.

Examples of night economy mode:

button button button

Leuchte Light
Wall mounting Warning: installation involves a mains connection. With 230 V, a risk of electrocution exists! Therefore, switch off the power first and check freedom from voltage with a voltage tester. Installation of the photoelectric lighting controller involves work on the mains power supply; this work must therefore be carried out professionally in accordance with regulations. Please note that the photoelectric lighting controller must be protected by a 10 A circuit breaker. The mains supply lead must be no greater than 10 mm in diameter. The NightMatic 3000 Vario can be installed directly ad6 jacent to the light fixture, if desired. A microprocessor distinguishes between the surrounding and consumer light, thereby ensuring constant light measurements. Switchless operation is recommended for optimum functioning. Using a screwdriver, loosen the four screws on the housing by turning anticlockwise and remove the housing cover. Hold the electronic housing against the wall and mark the drilling holes. Pay attention to the cable runs in the wall. Drill the holes and insert plugs. During installation, ensure that the leads are always inserted from below if possible. Before screwing

Night economy mode off

Medium night economy mode
Longer night economy mode
Setting for the morning hours:
Night economy mode always ends in the early hours of the morning between approx. 4 and 5 a.m. Thereafter, the light fixture is switched on again when darkness falls (factory setting). This function can be modified as follows: press the button briefly until the LED display illuminates. Release the button and the unit will toggle between the following setting options. economy mode functions with these values during the subsequent nights and therefore constantly adjusts itself until optimum function is achieved. Therefore, always allow the electronic system a few days time to learn the new conditions 4 x flashing of the LED display = light fixture is switched on in the morning. 2 x flashing of the LED display = light fixture remains off in the morning.

Warning:

After the unit has been commissioned and the twilight setting readjusted, the light fixture will remain on continuously throughout the first night until the morning, in order to determine the current time values for the twilight conditions. Night after commissioning and modification of the settings. All the values set are also retained if a power cut occurs. Do not dim the light sensor, in order to ensure trouble-free operation.

Technical data

Dimensions: Connection: Switching capacity: Response threshold: Night economy mode: Consumption: Enclosure: (H x W x D) 99 x 74 x 37 mm 230/240 V, 50 Hz max. 1000 watts (ohmic load, e.g. filament bulb) max. 500 watts (fluorescent lamps, cos = 0.5) adjustable from approx. 0.5 to 10 lux (factory adjustment 1 lux) variable switch-off at night (factory setting: off at approx. 1.30 a.m.) < 0.8 W IP 54
Declaration of conformity
This product complies with the European Directive on Low-Voltage Appliances, 73/23/EEC and the EMC Directive 89/336/EEC.

Functional Warranty

This STEINEL product has been manufactured with great care, and its operation and safety have been tested in conformity with the current regulations. Production is also submitted to final random-sample testing. The warranty period is 36 months, starting on the date of sale to the user. We undertake to remedy faults caused by material or manufacturing defects. This warranty undertaking shall be performed by the repair or replacement of the defective parts, at our own discretion. This warranty shall not cover damage to wearing parts or damage and faults caused by incorrect operation or maintenance. Breakage due to a fall is also not covered. Further consequential damage to external items is excluded. Claims under warranty shall only be accepted if the product is sent fully assembled and well packed complete with sales slip or invoice (date of purchase and dealers stamp) to the appropriate Service Centre or handed in to the dealer within the first 6 months. Repair Service: Our Customer Service Department will repair faults not covered by warranty or after the warranty period. Please send the product well packed to your nearest Service Centre.

Troubleshooting

Malfunction NightMatic 3000 Vario without power Cause Fuse has blown, not switched ON, lead disconnected Short-circuit Consumer faulty No power supply Surroundings still too bright Remedy Replace fuse, switch ON mains switch, check wiring with voltage tester Check connections Change consumer Refer to NightMatic 3000 Vario without power Wait until switching brightness is achieved. Set a new switching value, if required, using the button Wait until sufficient brightness achieved. Set a new switching value, if required (in the evening) Adjust function according to the section entitled Setting for the morning hours Switching times are geared to brightness values. Adjust setting if required. Readjust switching value (switching times are redetermined)

Light fixture does not switch ON
Light fixture does not switch OFF
Surroundings not yet sufficiently bright
Light fixture does not switch ON in the morning
Function not properly activated
Light fixture switches ON at an unusual time
Switchover from summer to winter time Incorrectly calculated switching times

Electrical Control

Protek RCD/MCB Consumer Units
The Protek range of consumer units offer very good value for money and provide either single or dual circuit protection against overloading, direct shorts and earth leakage. The IP65 rated enclosures are fitted with a 6 amp, 10 amp or 16 amp RCD together with a 'C' curve MCB, which is required to compensate for the start-up loadings associated with transformers.
Code ELA3110 ELA3112 ELA3114 ELA3120 ELA3122 ELA3124 Description Protek single circuit RCD/MCB 6 amp with enclosure Protek single circuit RCD/MCB 10 amp with enclosure Protek single circuit RCD/MCB 16 amp with enclosure Protek dual circuit RCD/MCB 6 amp with enclosure Protek dual circuit RCD/MCB 10 amp with enclosure Protek dual circuit RCD/MCB 16 amp with enclosure Price 33.83 33.83 33.83 36.55 36.55 36.55

Outdoor Switches

Use these to control different areas of garden lighting.
Code ELA4070 ELA4080 Description Outdoor single gang switch - IP54 Outdoor twin gang switch - IP54 Price 8.47 12.72

Light Controllers

The Steinel Nightmatic has an adjustable dusk sensor that will turn the lights on as daylight fades and switch them off at any set time. It can also be set to switch the lights back on early the next morning to run until daylight returns, and is especially useful in front gardens and along driveways.
Code ELA3070 Description Steinel Nightmatic 3000 vario - black Price 27.23
These RCD/MCBs not only protect your system from overloading, but also from direct shorts and earth leakage Protek RCD/MCB Consumer Unit
Switching capacity: max 1000w for filament and halogen lamps; max 500w for fluorescent lamps; will not work with SON lights

PIR Sensor

This top quality PIR/motion sensor can be used for operating any circuit, such as switching on driveway or exterior house lights.
Code ELA3080 Description Standard PIR sensor - black Price 29.78

Outdoor switches

Nightmatic 3000 vario

Standard PIR sensor

Oase FM Master Remote Control
The Oase FM master is the ideal product to provide power for pond pumps, filtration, garden lighting and other applications, all controlled by a simple remote control handset (with a range of up to 80m). Use the permanent current outlets for lawnmowers and hedge trimmers or for running a filtration system. The remote switched outlets are ideal for controlling garden lighting, water features and fountains, while the dimming function can be used to increase or decrease the flow on any Oase pump with an asynchronous motor. With a built-in ground mounting spike, the FM master is quick and easy to install.
Code PNA3056 Description Price Oase FM master 1 - remote control 4 outlets - 1 permanent current socket, 1 permanent current outlet and 2 remote switched outlets 127.62 Oase FM master 3 - remote control 4 outlets - 1 permanent current socket, 2 remote switched outlets and 195.dimming outlet Rock cover for Oase FM master remote control. Made of sand-covered fibreglass in a natural design

PNA3060

Dimensions 217mm; height 294mm (approx)

PNA3080

Rock cover for Oase FM master Oase FM master remote control

Dimensions 300mm; height 350mm (approx)
All prices are subject to VAT at the current rate