Product Fremd Fremd B77 Fremd A800 Fremd Fremd Fremd Fremd B77 Fremd A80 A800 Fremd A827 D820 D827 Teile B77 Fremd B77 Fremd Fremd Fremd A816 A820 A827 D820 D827 Te. A816 Fremd A900 Fremd A80 A800 Fremd Fremd A80 A816 Fremd A800 A820 A827 D820 D827 Te. Fremd A67 A810 Fremd B77 Fremd PR99 Fremd A812 Fremd PR99 Teile A807 A810 A812 A816 A820 A8. A779 C279 D424 D730 D739 Te. A3 A5 A807 A812 A816 A820 A. A80 A800 A812 A820 A827 Dig. Fremd D730 Fremd A730 A807 A810 A812 A816 D7. A820 A827 D820 D827 Teile Fremd A80 Fremd A80 A807 A812 A816 A820 A82. Fremd B77 Fremd A807 A810 A812 A816 A820 A8. A80 Fremd A810 A812 A816 B67 Teile A807 A812 A820 Fremd A80 Fremd A80 Fremd Fremd Fremd Fremd Fremd Fremd Fremd Fremd D827 D950 Teile D950 OnAir2 A812 A820 A827 D820 Teile Fremd A812 A820 A827 D820 D827 Te. A812 A816 A820 A961 A962 On. A80 A928 D19 D424 D731 D732 D74. A820 A820 A820 A827 A3 A5 A807 A812 A816 A820 A. A3 A5 A807 A812 A816 A820 A. Fremd A812 A816 A820 A827 D820 Te. Fremd A807 A820 A827 A961 A962 D8. Fremd Fremd Fremd A820 D820 SC169 A723 A779 A80 A800. Fremd

Page 7/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 1.20 15.00 2.00 4.40 0.50 0.50 0.50 0.90 2.60 23.00 18.00 23.00 24.00 10.00 32.00 27.00 18.00 22.00 22.00 22.00 11.00 24.00 25.00 10.00 19.00 27.00 11.00 15.00 1.10 1.40 1.20 0.90 1.20 0.80 0.80 2.20 11.00 2.00 2.00 10.00 2.00 3.50 3.80 3.30 4.70 8.00 4.10 3.00 2.80 3.70 32.00 32.00 1.30 1.30 32.00 32.00 1.30 32.00 1.60 2.00 2.00 2.00 1.90 2.00 1.80 2.00 5.20 5.40 5.20 0.80 4.60 0.60 2.40 2.80 2.00 0.10
Order No. 37.02.0107 37.02.0206-V 37.02.0215 37.02.0216 41.01.0130 41.01.0150 41.01.0230 41.01.0240 41.03.0124 41.04.0101 41.04.0102 41.04.0104 41.04.0105 41.04.0106 41.04.0108 41.04.0110 41.04.0111 41.04.0112 41.04.0113 41.99.0101 41.99.0102 41.99.0103 41.99.0104 41.99.0105 41.99.0106 41.99.0111 41.99.0113 41.99.0116 42.01.0111 42.01.0113 42.01.0115 42.01.0116 42.01.0117 42.01.0118 42.01.0119 42.01.0133 42.01.0150 42.01.0151 42.01.0152 42.01.0153 42.01.0154 42.01.0200 42.01.0202 42.01.0203 42.01.0209 42.01.0224 42.01.0225 42.01.0227 42.01.0228 42.01.0233 42.01.0250-V 42.01.0251-V 42.01.0252 42.01.0253 42.01.0254-V 42.01.0255-V 42.01.0256 42.01.0257-V 42.01.0260 42.01.0272 42.01.0279 42.01.0281 42.01.0286 42.01.0293 42.01.0300 42.01.0301 42.01.0313 42.01.0314 42.01.0354 42.01.0355 42.01.0414 42.01.0464 42.01.1000 42.01.1020 42.01.1040 43.10.0110
Spare Part Spring Washer-K D=14.3/23.7x0.4 Spring Washer-K D=12.3/21.08x 0.25 packing of 50 pcs Spring Washer-K D=25.5/39.6x0.4 Spring Washer-K D=40.5/61.5x0.55 Steel ball D=3.0mm stainless teel ball D=5.0mm stainless Steel ball D=3.0mm stainless Steel ball D=4mm stainless Carbide Bearing D=2/5x2.5 Ball Bearing D=5/16x5 Ball Bearing D=3/10x4 Ball Bearing D=8/22x7 Ball Bearing D=7/19x6 Ball Bearing D=4/13x5 Ball Bearing D=5/16x6 ZZ Ball Bearing D=8/16x6 Ball Bearing D=3/8x4 Ball Bearing D=5/8x3 Ball Bearing D=10/22x6 2Z Ball Bearing D=8/22 for Capstan Motor Ball Bearing D=6/19x6 Ball Bearing D=10/22x6 Noise checked Ball Bearing D=4/10x4 Ball Bearing D=8/22x7 for Spooling Motor Ball Bearing D=5/16x6 Ball Bearing D=10/22x6 ZZ Ball Bearing D=12/28x8 ZZ Ball Bearing D=17/40x12 Type 6203-2Z/QE 6 Cover plate light-gray to Knob D=9+10mm Cover plate light-gray to Knob D=14.5mm Cover plate black to Knob D=9+10mm Cover plate red to Knob D=9+10mm Cover plate yellow to Knob D=9+10mm Cover plate blue to Knob D=9+10mm Cover plate green to Knob D=9+10mm Nut-Cover light-gray to Knob D=14.5mm Rotary Knob Alu D=6.35x28mm Cover plate black D=28mm to 42.01.0150 Arrow Disc black D=28mm to 412.01.0150 Rotary Knob Alu D=6.3/20mm Cover plate black D=20 to 42.01.0153 Rotary Knob dark-gry D=3.17/10mm Rotary Knob grey D=10/3mm Rotary Knob dark-gray D=4/10mm Rotary Knob dark-gray mat Rotary Knob dark-gray D=36/6mm Fluted Knob dark-gray D=10x1/8" Fluted Knob dark-gray D=3/10mm Fluted Knob dark-gray D=4/10mm Fluted Knob dark-gray D=4/15mm Cover plate light-gray to Knob D=10mm packing of 50 pcs Cover plate dark-gray to Knob D=10mm packing of 50 pcs Cover plate black to Knob D=10mm Cover plate red to Knob D=10mm Cover plate blue to Knob D=10mm packing of 50 pcs Cover plate yellow to Knob D=10mm packing of 50 pcs Cover plate green to Knob D=10mm Cover plate liht-gray to Knob D=15mm packing of 50 pcs Cover plate red to Knob D=15mm Cover plate dark-gray to Knob D=28mm Cover plate dark-gray to Knob D=36mm Cover plate red to Knob D=36mm Nut-Cover dark-gray to Knob D=10mm Nut-Cover dark-gray to Knob D=15mm Arrow Disc light-gray to Knob D=36mm Arrow Disc light-gray to Knob D=10mm Rotary Knob gray D=21mm to Phones Rotary Knob gray D=21mm to MODE Rotary Knob black D=13/6 leading Cover flat D=13mm black leading Rotary Knob dark-gray mat D=21 Cover plate light-gray mat to Knob D=21 Rotary Knob dark-gray D=11mm with Cover dark-gray Rotary Knob dark-gray D=15mm with Cover dark-gray Dual-Rotary Knob gray D=15mm Label for revision "A" D=5mm light-blue

Product A807 A810 A812 A816 A820 A8. A80 A800 A807 A81 A810 A812. A807 A812 A816 A820 A827 D8. B67 Fremd A800 A80 A800 Digimed A800 B67 Fremd A807 A810 A812 A816 A820 A8. A80 TLS A80 A800 B67 A916 Fremd Fremd PR99 A800 A80 A810 A900 A963 A990 D780 Fr. C221 D732 Fremd A80 A800 Fremd Fremd A961 A962 A963 A970 Bal-U D. A67 A800 B67 A80 A800 B77 PR99 Fremd A800 A800 Fremd A800 A800 A800 A800 A80 Fremd A730 A80 A807 A810 A812 A81. A807 A810 A812 A816 A820 A8. A727 A730 D739 DA730 A80 A800 A807 A810. Fremd A67 A80 A800 A81 B67 B77 D8. A810 A80 A810 A812 A820 B67 B77. A820 D820 A80 A807 A810 A812 A820 A99. A810 A812 A816 A820 A827 A9. A80 A81 A810 A812 A820 B67. A80 A810 B67 D820 A810 A990 D820 D950 Teile A67 A80 A800 A81 A810 A812. A810 A812 A816 A820 A827 D8. A80 A812 TLS A800 Teile Tel-Hyb Fremd A80 A810 A812 A816 A820 A82. A80 TLS A80 A800 A810 A812 A820 B67. D820 Fremd D820 SC4008 SC4016 A80 A800 A810 A812 A816 A82. A800 SC4008 A807 A810 A812 A820 D820 D8. A80 A810 A812 A816 A820 A82. A67 A80 A800 A81 A810 A820. A800 SC4016 A80 A800 A81 A810 D820 D827. A810 A812 A820 D820 SC4008. A80 A800 A81 D820 D827 SC40. D820 D827 SC4008 TLS A800 A810 A812 A820 Teile T. A800 D820 A800 A812 A816 A820 A827 D8. A800 D820 D827 SC4008 TLS A800 D820 SC4008 TLS A80 A800 B67 D820 D827 Teil. D820 SC4008 SC4016 D820 D827 Teile Tel-Hyb A80 A800

Page 12/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 2.00 2.00 3.20 3.20 10.00 2.80 3.00 2.00 2.00 4.40 2.00 2.60 2.00 2.00 2.00 9.30 2.00 2.00 2.40 2.50 3.20 2.80 14.00 23.00 7.70 10.00 5.30 2.50 18.00 4.60 10.00 10.00 45.00 10.00 3.40 2.10 1.80 3.30 15.00 8.00 2.00 1.80 15.00 15.00 2.00 15.00 2.00 2.10 115.00 1.70 2.00 2.60 10.00 2.00 15.00 9.00 18.00 2.00 10.00 3.30 2.00 1.60 2.00 2.00 1.80 10.00 1.50 2.00 10.00 2.00 2.00 2.00 2.00 2.00 45.00 2.00
Order No. 50.06.0174 50.06.0175 50.06.0193 50.06.0195 50.06.0197 50.06.0221 50.06.0240 50.06.0244 50.06.0245 50.06.0247 50.06.0251 50.06.0253 50.06.0259 50.06.0273 50.06.0283 50.06.0299 50.06.0368 50.06.0373 50.06.0374 50.06.0393 50.06.0540 50.06.0541 50.06.0592 50.06.0596 50.06.0624 50.06.0629 50.06.0645 50.06.0669 50.06.0699 50.06.1573 50.06.1645 50.06.1874 50.07.0001 50.07.0002 50.07.0003 50.07.0004 50.07.0006 50.07.0007 50.07.0008-V 50.07.0010 50.07.0012 50.07.0013 50.07.0014-V 50.07.0015-V 50.07.0017 50.07.0018-V 50.07.0019 50.07.0020 50.07.0021 50.07.0022 50.07.0024 50.07.0025 50.07.0026 50.07.0027 50.07.0029 50.07.0034 50.07.0035 50.07.0036 50.07.0037 50.07.0040 50.07.0046 50.07.0049 50.07.0050 50.07.0051 50.07.0066 50.07.0067 50.07.0070 50.07.0081 50.07.0489 50.07.0511 50.07.0512 50.07.0520 50.07.0526 50.07.0538 50.07.0902-V 50.07.1011
Spare Part IC SN-74LS-174N TTL IC SN-74LS-175N TTL IC SN-74LS-193N TTL IC SN-74LS-195AN TTL IC SN 74 LS 197 N IC SN-74LS-221N TTL IC SN-74LS-240N TTL IC SN-74LS-244N TTL IC SN-74LS-245N TTL-3 IC SN-74LS-247N TTL IC SN-74LS-251N TTL IC SN-74LS-253N IC SN-74LS259 8Bit Addr Latch IC SN-74LS-273 IC SN 74 LS 283 N TTL IC SN-74LS-299N IC SN-74LS-368AN IC SN-74LS-373N IC SN-74LS-374N IC SN-74LS-393N TTL IC SN-74LS-540N IC SN-74LS-541N IC SN 74 LS 592 N IC SN-74LS-596N IC SN-74LS-624N IC SN-74LS-629N IC SN-74LS-645N IC SN 74 LS 669 N IC SN-74LS-699N IC SN-74LS-573N IC SN-74LS-645-1N IC SN 74 ALS 874 N IC M-7218 CIPI IC AD-7524JN = PM-7524HP IC MM-74C-374N IC MC-14-556B = CD-4556BPC IC MC-14001BCP = CD-4001BE IC MC-14035BCP = CN-4035BCN IC MC-14093BCP = CD-4093BE packing of 10 pcs IC MC-14499P IC MC-14025BCP / CD-4025BG IC MC-14013BCP = CD-4013BE IC HFC-40-106BE packing of 10 pcs IC MC-14053BCP = CD-4053BE packing of 10 pcs IC MC-14077BCP IC MC-14094BCP = HEF-4094BP packing of 10 pcs IC CD-4019BE CMOS IC 4020BCP IC F 4731 BDC IC MC-14071BCP IC MC-14052BCP = HCF-4052BE IC MC-14015BCP = CD-4015BE IC AD-7528IN = MP-7528JN IC MC-14027BCP = CD-4027BE IC ADC-0803LCN IC DG-201ACJ = HI-3-201-5 IC ICM-7218AIJI = ICM-7218AIPI IC ICM-7555IPA IC AD-7528JN IC MC 14040 BCP, HEF 4040 BP IC MC-14046BPC IC 4049BPC = 14049UBCP IC MC-14050BCP = CD-4050BE IC MC-14051BCP = CD-4051BE IC MC-14066BCP IC CD-4060BF = HCF-4067BE IC 4070BPC = MC-14070BCP IC MC-14081BCP = CD-4081BE IC MC-14489P = CD-4489 IC. 4511. IC 4512BPC = MC-14512BCP IC 4520BPC = HEF-4520BP IC MC-14526BCP IC MC14538BCP = F4538BPC IC MM-74C 902N packing of 10 pcs IC MC-14011BCP

Spare Part Pilot Lamp 36V 19mA Bi-Pin T1 packing of 10 pcs Pilot Lamp 24V 0.6W BI PIN T1 Pilot Lamp 28V 40mA T1-3/4 Pilot Lamp 6.3V 200mA T1-3/4 Pilot Lamp 5V 60mA T 1 3/4 packing of 10 pcs Pilot Lamp 6V Multi LED red Fuse Cover for 5x20mm Mini Fuse 7A 2.5x8mm Soldering Terminal 9-Pin Soldering Terminal Valve Socket Noval Fuse Holder 5x20mm Bayonet Fuse Holder 6.3x32mm Bayonet Fuse Holder 5x20mm 16A 250V Fuse Holder Fuse holder Fuse holder 6.3x32mm 16A 250V Insulation Bush to Fuse Holder Voltage Selector 100-240V Voltage Selector Voltage Selector 100-230V PCB Mount. Fuse Holder 1/2 PCB MTG Fuse Holder 5x20mm IC Socket IC Socket 20-Pole solderable IC Socket 8-Pole IC Socket 14-Pole IC Socket 16-Pole IC Socket 24-Pole IC Socket DIL 40-Pole IC Socket DIL 28-Pole IC Socket DIL 18-Pole IC Socket DIL 24-Pole solderable IC Socket Single Line 64-Pole PCB MTG IC Socket Single-in-line LED Socket Single Line 2-Pole PCB IC-Socket PLCC 32-Pole IC-Socket PLCC 44-Pole Lamp Holder, green Lens Lamp Holder W2 x 4.6d LED 5V 16mA red complete with socket Loudspeaker Terminal 4-Pole Terminal yellow/green 16A Terminal yellow 25A Terminal black 60A Terminal red 60A Lamp Holder to VU-Meter packing of 10 pcs IC Socket DIL 20-Pole IC Socket DIL 14-Pole IC Socket DIL 16-Pole IC Socket DIL 20-Pole Pin 0.63x0.63 L=5.8/3.4 Jumper 2x0.63 Gold Jumper Pin 0.3" Connector Strip female 2-Pole CIS Connector Strip female 12-Pole CIS Connector Strip female 6-Pole CIS Connector Strip female 12-Pole CIS Connector Strip female 6-Pole CIS Connector Strip female 9-Pole CIS Connector Strip female 7-Pole CIS Connector Pin Strip 9-Pole CIS angle Connector Pin Strip 12-Pole CIS angle Connector Pin Strip 6-Pole CIS angle Connector Pin Strip 7-Pole CIS angle Connector Pin Strip 4-Pole CIS angle Contact Pin CIS packing of 100 pcs Connector Strip female 20-Pole CIS Connector Pin Strip 3-Pole CIS angle Connector Shell 11-Pole CIS Connector Shell 6-Pole CIS Connector Shell 12-Pole CIS Connector Shell 9-Pole CIS Connector Shell 7-Pole CIS packing of 50 pcs Connector Shell 15-Pole CIS Connector Strip female 12-Pole CIS
Product Ampli Bal-U Distr-U Fremd T. A916 Fremd A807 D827 Fremd A916 A916 C221 D732 D820 D827 Teile Fremd A80 A800 Fremd DA80 A800 A812 A816 A820. A800 A820 A827 A980 A990 Teile A827 A961 A962 A963 A970 Ba. A820 A961 A962 A963. A820 A827 Teile A820 A827 Teile 169 A800 A807 A812 A961 A96. A810 A900 A961 A962 A963 A9. AA80 A807 A810 A820 A827. A827 D827 Teile A816 A820 A827 A980 C221 D1. A764 A80 A800 A807 A81 A810. 269 A764 A779 A80 A. 269 A730 A764 A80 A. A730 A764 A80 A800 A807 A81. A67 A730 A807 A810 A812 A81. A764 A80 A807 A810 A812 A81. A764 A807 A810 A812 A816 A8. A730 A807 A812 A816 A820 A8. A816 A963 A990 D19 D424 D78. A727 A730 A764 A779 A800 A8. A730 A764 A807 A812 A816 A8. A730 A764 A807 A812 A816 A8. D19 D424 D827 D940 D941 D95. A807 A990 D19 D424 D827 D94. A80 A827 A900 A962 A963 A970 A9. Fremd TLS A962 Ampli Teile Tel-Hyb Te. Fremd Fremd Fremd A820 D820 Fremd A963 D920 Fremd A963 D920 Fremd A963 D920 Fremd A723 A730 A764 A80 A800 A80. A723 A730 A764 A80 A800 A80. A800 SC4008 D741 A816 PRA67 A730 A80 B67 A807 A812 A816 A820 A827 A9. A67 A730 A810 A812 A816 A82. 069 A807 A812 A816 A820 A82. 069 A80 A800 A807 A812 A900. A80 A807 A810 A812 A816 A82. A807 A820 A827 A900 A928 A9. A80 A820 A827 A900 A963 B67. A80 A807 A810 A812 A900 A96. A810 A812 A816 A820 A900 A9. A807 A810 A820 D820 D827 Fr. A67 A80 A800 A807 A81 A820. A80 A800 A807 A810 A812 A81. A807 C274 PR99 A779 A807 A810 A812 C270 C2. A779 A807 C270 C279 D780 MR. 069 A730 A779 A807 A812 A81. A807 D739 Fremd A807 C270 Teile A779 A80 C279 MR8 Teile

Product A80 Fremd A80 Fremd A80 Fremd A80 A81 Fremd Fremd A810 A812 A816 A820 Teile A80 Fremd B67 Fremd A80 B67 Fremd A900 A962 A963 A970 A980 Te. 069 A800 A900 A962 A963 A97. A80 A800 A900 A962 A963 A97. A80 A807 A820 A827 A900 A91. A820 A827 A900 A962 A963 A9. A730 A779 A80 A807 A810 A81. A80 A800 A807 A827 A900 A91. A807 A810 A812 A820 A827 A9. A807 A810 A812 A816 A820 A8. A779 A807 A810 A812 A827 A9. A807 A928 Teile A723 A827 D827 Teile A730 A779 A810 A900 A928 A9. A827 A900 A916 A928 A961 A9. Fremd A779 A807 A827 A900 A916 A9. 269 B77 PR269 B77 C270 PR99 B77 PR99 C270 C274 Fremd A800 A80 Fremd A80 A800 A820 A827 A963 A97. A810 Tel-Sys A80 Fremd A80 Fremd A80 A800 A80 Fremd Fremd A80 Fremd A812 A816 A820 A827 A963 A9. A80 A800 A80 A810 A812 A820 Teile A80 Fremd Fremd B77 PR99 B77 Fremd Fremd Fremd Fremd Fremd B77 D19 Echo D19 D19 OnAir1 OnAir2 Teile DigaStu OnAir1 Teile A80 A800 A80 A807 A81 A810 A812 A816. Fremd A80 A807 A81 A810 A812 A816. B77 PR99 A810 A807 A812 A816 A820 A827 D8. Fremd Fremd D820 Fremd D820 Fremd D820 A80 Fremd Fremd A80 Fremd A80 Fremd A820 A827 D827 Teile

Page 30/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 1.60 1.40 1.30 7.30 3.20 42.00 31.00 3.40 2.00 10.00 10.00 15.00 32.00 2.00 8.00 1.30 7.30 32.00 15.00 4.30 1.50 9.00 5.10 2.60 2.00 3.80 2.00 36.00 2.00 35.00 8.20 25.00 14.00 23.00 39.00 2.00 10.00 8.90 3.70 7.60 2.00 10.00 1.20 2.10 18.00 0.80 0.80 1.20 0.90 2.00 2.00 0.90 0.70 0.90 0.90 0.70 1.50 0.70 1.00 10.00 19.00 18.00 1.30 0.50 0.50 0.60 0.60 1.80 10.00 43.00 30.00 60.00 10.00 3.10 0.50 12.00
Order No. 59.11.3153 59.12.7122 59.12.9681 59.14.0104 59.14.0472 59.14.6100 59.14.6809 59.18.0102 59.18.0108 59.19.0103 59.20.0121 59.22.3101-V 59.22.3221-V 59.22.4102 59.22.4103 59.22.4221 59.22.4222 59.22.5101-V 59.22.5220-V 59.22.6222 59.22.6470 59.22.6472 59.25.2103 59.25.5102 59.25.5221 59.25.5222 59.26.2100 59.26.3103 59.26.5229 59.26.6103 59.26.6222 59.26.6223 59.26.6472 59.26.7103 59.26.7153 59.27.4470 59.29.4103 59.29.4472 59.30.1101 59.30.1221 59.30.1470 59.30.4101 59.30.4479 59.30.5150 59.30.5470 59.31.6154 59.31.6223 59.31.6224 59.31.6473 59.31.6474 59.31.7223 59.31.8153 59.32.0100 59.32.0221 59.32.0561 59.32.1471 59.32.3104 59.34.1180 59.34.4101 59.35.2103 59.35.6103 59.35.6153 59.36.2479 59.40.0103 59.40.0104 59.40.0224 59.60.3529 59.63.1103 59.99.0307 59.99.0402 59.99.0450-V 59.99.0451-V 59.99.0452 59.99.0453 59.99.0609 59.99.1711
Spare Part Capacitor 0.015uF 5% 160V PC Capacitor 1'200pF 1% 63V PS Capacitor 680pF 1% 500V PS Capacitor 0.1uF 20% 250V MP Capacitor 4'700pF 20% 250V IEC65 Capacitor 10uF 10% 240V MP Capacitor 8uF 10% 240V MP Capacitor 5.5-65pF.% 100V Trimmer Capacitor 5.5-40pF.% 100V Trimmer Capacitor 780-2100pF 0.7% 500V Trimmer Mounting Clamp for Electrolytic Capacitor D=76mm Capacitor 100uF -20% 10V EL packing of 50 pcs Capacitor 220uF -20% 10V EL packing of 50 pcs Capacitor 1'000uF -20% 16V EL Capacitor 10'000uF -20% 16V EL Capacitor 220uF -20% 16V EL Capacitor 2'200uF -20% 16V EL Capacitor 100uF -20% 25V EL packing of 50 pcs Capacitor 22uF -20% 25V EL packing of 50 pcs Capacitor 2'200uF -20% 40V EL Capacitor 47uF -20% 40V EL Capacitor 4'700uF -20% 40V EL Capacitor 10'000uF -20% 10V EL axial Capacitor 1'000uF -20% 40V EL axial Capacitor 220uF -20% 40V EL axial Capacitor 2'200uF -20% 35V EL axial Capacitor 10uF 20% 16V SAL radial Capacitor 10'000uF -10% 16V EL Capacitor 2.2uF 20% 25V SAL radial Capacitor 10'000uF -10% 40V EL Capacitor 2'200uF -10% 40V EL Capacitor 22'000uF -10% 40V EL Capacitor 4'700uF -10% 40V EL Capacitor 10'000uF -10% 63V EL Capacitor 15'000uF -10% 63V EL Capacitor 47uF -10% 40V EL Capacitor 10'000uF 20% 35V EL Capacitor 4'700uF 20% 35V EL Capacitor 100uF 20% 3V TA Capacitor 220uF 20% 3V TA Capacitor 47uF 20% 3V TA Capacitor 100uF 20% 16V TA Capacitor 4.7uF 20% 16V TA Capacitor 15uF 20% 20V TA Capacitor 47uF 20% 20V TA Capacitor 0.15uF 10% 100V MPETP Capacitor 0.022uF 10% 100V MPETP Capacitor 0.22uF 10% 100V MPETP Capacitor 0.047uF 10% 100V MPETP Capacitor 0.47uF 10% 100V MPETP Capacitor 0.022uF 10% 250V MPETP Capacitor 0.015uF 10% 400V MPETP Capacitor 10pF 20% 400V CER Capacitor 220pF 20% 400V CER Condensator 560pF 20% 400V CER Capacitor 470pF 10% 400V CER Capacitor 100nF 100% 40V CER Capacitor 18pF 5% 63V NP-0 CER Capacitor 100pF 5% 63V N750 CER Capacitor 10'000uF -20% 16V EL Capacitor 10'000uF -20% 63V EL Capacitor 15'000uF -20% 63V EL Capacitor 4.7uF 20% 10V TA Capacitor 0.01uF 10% 63V PETP Capacitor 0.1uF 10% 63V PETP Capacitor 0.22uF 10% 63V PETP Capacitor 22nF 10% 50V X7R CER 1210 Capacitor 150pF 2% 50V PPS Capacitor 15.8nF 1.2% 63V PS Capacitor 15'000uF -10% 63V EL Capacitor 0.47uF 10% 150V MP packing of 10 pcs Capacitor 3.5uF 10% 160V MP packing of 10 pcs Capacitor 4.3uF 10% 160V MP Capacitor 0.1uF 10% 250V MP Capacitor 22pF 5% 63V CER Capacitor 3'300uF 20% 50V EL

Page 34/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 305.00 700.00 75.00 18.00 18.00 18.00 325.00 74.00 135.00 2.00 15.00 2.00 10.00 2.10 11.00 19.00 15.00 11.00 10.00 23.00 1.00 2.00 0.80 36.00 43.00 2.00 2.70 11.00 26.00 50.00 4.30 2.00 15.00 4.00 2.50 10.00 2.10 2.00 2.00 12.00 2.00 10.00 2.20 10.00 25.00 37.00 1.80 54.00 11.00 11.00 2.00 25.00 8.80 10.00 39.00 10.00 0.50 17.00 1.90 1.00 1.10 0.80 1.80 2.30 1.00 45.00 3.10 1.20 2.40 4.80 2.00 38.00 4.50 5.40 3.80 120.00
Order No. 99.01.0502 99.01.0509 99.01.0511 99.01.1081 99.01.1082 99.01.1083 99.01.4900 99.01.5002 1.010.001.26 1.010.001.33 1.010.001.53 1.010.001.55 1.010.001.58 1.010.002.23 1.010.002.58 1.010.002.99 1.010.003.58 1.010.004.43 1.010.004.58 1.010.005.58 1.010.006.23 1.010.006.50 1.010.006.55 1.010.006.58 1.010.007.21-V 1.010.007.23 1.010.007.55 1.010.007.58 1.010.008.58 1.010.009.58 1.010.010.21 1.010.010.55 1.010.010.58 1.010.011.21 1.010.011.55 1.010.011.58 1.010.012.21 1.010.012.50 1.010.012.55 1.010.012.58 1.010.013.55 1.010.013.58 1.010.014.55 1.010.014.58 1.010.015.58 1.010.016.58 1.010.017.21 1.010.017.49 1.010.017.58 1.010.018.58 1.010.019.21 1.010.019.58 1.010.020.37 1.010.020.58 1.010.021.58 1.010.022.58 1.010.023.23 1.010.023.58 1.010.024.37 1.010.025.21 1.010.025.37 1.010.026.21 1.010.027.54 1.010.028.37 1.010.029.37 1.010.030.49 1.010.031.55 1.010.032.23 1.010.032.37 1.010.032.54 1.010.032.55 1.010.034.21-V 1.010.034.50 1.010.035.21 1.010.035.54 1.010.035.58
Spare Part Alltemp Q-Paste NB50 Tin Box of 0.75Kg UNISILICON PASTE L 640 IN BOX A 750GR Freezing Spray Touch-up Paint purple violet RAL4007 Touch-up Paint gray-silver RAL7001 Touch-up Paint gray-antrazit RAL7016 MIKROZELLA G 8 OY Solder D=0.78mm 63/37 SN/PB Wrench D=12/9x80 for Potentiometer Handle Ground Terminal Contact Spring Potentiometer 10-kOhm lin. Cup Washer to M3 Potentiometer 10-kOhm +log. EARCUSHION TO RH 3100 Potentiometer 100-kOhm -log / 4.7-kOhm lin REVOX Logo Potentiometer 10-kOhm +log. 10-kOhm -log. Potentiometer 2x100-kOhm log. 4.7-kOhm lin. Base 0.1MM to Erase Head Flat Spring to TO220 Contact Spring Potentiometer 10-kOhm +log. 10-kOhm -log. 4.7-kOhm +log. Hexag.socket Oval Head Screw M4x8 black packing of 100 pcs Washer massiv No.8 Contact Spring Potentiometer 2x10-kOhm lin. Potentiometer 2x10-kOhm +log. with pull switch Potentiometer 2x10-kOhm +log. Hexagonal socket Oval Head Screw M4x8 special Push-Button 10mm gray Potentiometer 2x10-kOhm lin. Hexagonal socket Oval Head Screw M4x12 special Push-Button 17mm gray Potentiometer 10-kOhm +log. Hexagonal socket Oval Head Screw M4x14 special Holder for Diode Push-Button 10mm black Potentiometer 2x10-kOhm +log. Push-Button 10mm light grey/red Potentiometer 4.7-kOhm lin. Push-Button 10mm dark grey Potentiometer 22-kOhm lin. Potentiometer 2x10-kOhm lin / 2x10-kOhm +log Potentiometer 4x100-kOhm -log/2x47-kOhm lin COLLARED SCREW M3 X7.5 Euro-Card 2xCU+1 Potentiometer 2x22-kOhm lin. Potentiometer 2x4.7-kOhm lin. Extension Screw M3x9 Potentiometer with pull switch 2x10-kOhm lin. Tension spring Shape C D=7.4x59 Potentiometer 10-kOhm -log. Potentiometer with pull switch 10-kOhm +log / 10-kOhm -log Potentiometer 47-kOhm +log. Washer D=10.1/16.0x1.5 hard paper Potentiometer linear 2x100-kOhm.%.W Tension spring Shape B D=5.05x13.3 Oval Head Screw black M3x6 Tension spring Shape B D=4.0x17.0 Oval Head Screw M3x5 blk Front Pin Tension spring Shape A D=5.8x25.3 Tension spring Shape B D=7.7x41.0 D-Euro Card 2xCU.3/.6" WRAP Push-Button 17mm dark red Washer D=4.1/7.0x0.25 Teflon Tension spring Shape A D=5.73x23.4 Closing Threaded Bolt 4-40 UNC-2B L=15.4mm Push-Button 17mm light gray Hexag.socket Countersunk Screw black M4x8 packing of 100 pcs Transistor BC-327-25SEL. PV-1101 Tight Fit Screw M4x16 Closing Threaded Bolt 4-40 UNC-2B L=10mm Potentiometer 100-kOhm 10-k+/ 10-kOhm- 100-kOhm 2x4.7-kOhm

Spare Part Erase and Combi Head 1/4" 2 Track Synchro Head Erase Head 1/4" 2-Track 1mm Separation Erase Head 1/4" 2-Track 0.6mm Separation ERASE HEAD 2CH/TC 0.5" TO A807/A820 TC Read/Write/Erase Head 0.5" Erase Head 1/2" 4-Track 0.8mm Separation Erase Head 1/2" 2-Track to A807 Rubber Foot Remote Control A721 10m Rotary Knob Spooling Assembly 76kHz Osc. Decorative Ring Cap red Pinch Roller complete Bottom plate Push-Button Rail 3.75-15 IPS Mother Board complete MK2 Reproduce Amplifier 3.75-15" Record Amplifier 3.75-15" available as long as Stock Oscillator available as long as Stock Voltage Regulator pcb SYNC PREAMPLIFIER Reproduce Amplifier 7.5-30" RECORD AMPLIFIER,7.5-30 IPS PILOT TONE AMPLIFIER Mono/Stereo Switch PILOT-SYNCHRONIZER Push-Button Switch Attenuator Board complete POTENTIOMETER-PRINT Tape Transport Control PREDIVIDER 15/30 IPS Spooling Motor Control PCB complete Display Board Tape Move Sensor pcb available as long as Stock Tape Tension Sensor Board available as long as Stock Capstan Speed Control 3.75/7.5/15ips Capstan Speed Control 7.5/15/30ips Capstan Speed Control SLS CAPSTAN MOTOR CONTROL Capstan Speed Control 7.5-30 IPS Vari-Speed Control PCB Conversion Kit +-7 sharp Tape Transport Control cplt. MK2 Tape Tension Sensor right 1/4" Tape Tension Sensor right MKII Bearing Bolt Tape Tension Sensor left MKII Cover to Return Sheave left + right 1/4" Pinch Roller Cap (D=17mm) Guide Roller left 1/4" cplt. Guide Roller 1/4" Cover to Guide Roller Guide Roller right 1/4" cplt. Guide Roller right (Exchange) Guide Roller right Tape Tension Sensor left MKII Tape Tension Sensor right repl.Mech. MK-I Tape Tension Sensor left repl.Mech. MK-I Brake Lever cplt. MKII Brake Lever cplt. MKII Brake Chassis complete Brake Band SIDE PANELS L+R COMPLETE AVAILABLE AS LONG AS STOCK Cover complete available as long as Stock Connection Board (Exchange) Stabilizer pcb for A169/A269 Converter Type 2 Potentiometer 2x10k +log./4k7 +/-log. POTENTIOMETER 2X100K LOG (MONITOR VOLUME) Potentiometer 2x10K +Log -Log Potentiometer 2x1-kOhm +log. Potentiometer 4.7K lin. cplt. (Treble Equal.) POTENTIOMETER 22K LIN CPL. (BAS EQUAL.) Potentiometer 10-kOhm log.cpl. (Reverb/Foldback)
Product A810 A812 A820 Teile A807 A810 A812 A820 Teile A810 A807 A810 A812 A820 Teile A807 A820 A807 A820 A80 A807 A820 A807 A820 A827 A961 A962 Teile T. A721 B77 Fremd B77 PR99 B77 PR99 A807 B77 Teile B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 A80 A80 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 B67 A810 B67 B67 A67 A807 A810 B67 Teile B67 A810 B67 A810 B67 A810 B67 B67 B67 B67 B67 B67 B67 A810 A812 A816 Teile A810 A812 A816 Teile A810 A812 A816 Teile A807 A810 B069 A916 A980 Teile 169 269

Product PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 B77 PR99 B77 PR99 B77 PR99 B77 PR99 B77 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 B77 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 B77 PR99 B77 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 PR99 A807 A810 B77 Teile PR99 PR99 PR99 PR99 PR99 B77 PR99 A807 D730 Teile A80 A800 A80 A800 A80 A800 A80 A800 A80 A800 A80 A800 A80 A800 A80 A800 A800

Page 57/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 530.00 15.00 32.00 18.00 110.00 110.00 315.00 280.00 945.00 10.00 940.00 82.00 380.00 1'170.00 81.00 1'170.00 550.00 39.00 14.00 190.00 5'275.00 5'275.00 450.00 295.00 295.00 290.00 5.90 7.00 290.00 210.00 120.00 700.00 27.00 350.00 1'495.00 340.00 230.00 350.00 275.00 245.00 1'255.00 1'725.00 175.00 145.00 10.00 1.50 360.00 245.00 420.00 200.00 330.00 320.00 305.00 650.00 450.00 700.00 700.00 165.00 200.00 950.00 950.00 88.00 1'055.00 195.00 480.00 225.00 105.00 290.00 245.00 490.00 470.00 540.00 520.00 690.00 640.00 275.00
Order No. 1.180.093.00 1.180.100.64 1.180.100.69 1.180.107.00 1.180.108.00 1.180.109.00 1.180.110.00 1.180.138.00 1.180.142.81-V 1.180.143.00 1.180.146.81-V 1.180.148.00 1.180.149.81 1.180.150.00 1.180.150.03 1.180.151.00 1.180.155.00 1.180.158.00 1.180.160.03 1.180.160.07 1.180.161.82 1.180.162.82 1.180.181.00-E 1.180.210.00 1.180.211.00 1.180.220.00 1.180.220.01 1.180.220.02 1.180.221.00 1.180.235.00 1.180.250.00 1.180.255.00-V 1.180.256.00 1.180.257.81 1.180.260.00-V 1.180.263.00 1.180.264.00-V 1.180.274.00-V 1.180.280.00-V 1.180.291.00-V 1.180.301.81 1.180.321.82 1.180.336.81 1.180.337.00 1.180.390.52 1.180.402.02 1.180.436.82-V 1.180.440.00 1.180.450.81 1.180.457.81-E 1.180.460.82-E 1.180.465.00 1.180.466.81-V 1.180.472.00-E 1.180.475.86-E 1.180.482.85-E 1.180.484.89-E 1.180.486.81 1.180.491.81-E 1.180.500.83-E 1.180.501.83-E 1.180.515.00 1.180.530.81 1.180.533.00 1.180.551.81 1.180.556.00 1.180.625.00 1.180.661.00 1.180.705.00 1.180.710.83 1.180.711.82 1.180.712.81 1.180.713.81 1.180.714.81 1.180.715.00 1.180.720.81
Spare Part Conversion Kit output stage A800 Rod Button Label Set / A800 Brake Band to Tape Tension Cover left cplt. Tape Tension Cover right cplt. hinged Cover short cplt. Dashpot complete Tape Tension Sensor left Isolation Amp. PC.Board Tape Tension Sensor right Blocking Roller cplt. Contactless Potentiometer Update Kit Tape Tension Sensor Idler 2" left Roller 2" Tape Tension Sensor Idler 2" right GUIDE ROLLER 2" COMPL. Plate riveted (Tape Tens.Sens) Coupling Disk to Spoolingmotor CARBON BRUSH SET TO SPOOLING- MOTOR (4 PCS PER SET) Spooling Motor left Spooling Motor right (Exchange) Tape Move sensor complete Tape Tension Spring left 1" Tape Tension Spring right 1" Tape Tension Spring Assy left 2" Tension spring 2" Tension spring 2" Tape Tension Spring Assy right 2" Brake Chassis cplt. left Brake Drum Push-Button Unit complete MAGNET-HOLDER CPLT. Push Button Board complete Ctrl. Unit Timer + Varispeed Driver PCB Timer + Varispeed Timer Display PCB Varispeed Display PCB Mains Switch (only for Repair-Exchange) Cutter Potentiometer Power Supply for Transport Power Supply Spooling Motor Line Filter Line Filter PCB 10 PROM R-0003 DEC. 2 IBL Stop Pin short Command Receiver Board Varispeed Interface cplt. Command Decoder (Exchange) Spooling Motor Control A800 new (Exchange) Capstan Speed Control Voltage Regulator for MKI Stabilizer for MKII (Exchange) Tape Deck Interface (Exchange) Interface PCB Autolocator (Exchange) MPU PCB MKI 1/2 (Exchange) MPU PCB Remote Expansion pcb (Exchange) Switching Regulator (Exchange) Spooling Motor Power Unit A800 2" old Modif. (Exchange) Spooling Motor Power Unit PROT.CIRCUIT TO POWER SAGE 1.080.500.83 Power Supply to Expansionsrack Power Supply PCB Delay Control Delay Control Register UPDATE CABLE HARNESS Reproduce Preamplifier Audio Section Front Door Reproduce Amplifier Sync Amplifier cplt. Record Amplifier RF Amplifier Master Oscillator Record Amplifier Trafoless Subpanel PCB

Page 83/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 5.90 54.00 165.00 170.00 400.00 3.20 760.00 320.00 1'500.00 4'150.00 1'270.00 1'285.00 1'190.00 1'385.00 72.00 65.00 61.00 21.00 10.00 220.00 290.00 125.00 295.00 62.00 225.00 110.00 280.00 69.00 20.00 235.00 110.00 215.00 72.00 200.00 125.00 190.00 135.00 175.00 255.00 80.00 210.00 93.00 44.00 140.00 325.00 670.00 44.00 425.00 1'700.00 6'005.00 7'500.00 69.00 69.00 20.00 5.90 94.00 2.80 7.80 8.90 4.30 160.00 28.00 2'645.00 230.00 245.00 83.00 870.00 13.00 64.00 64.00 105.00 110.00 110.00 180.00 760.00 71.00
Order No. 1.820.300.21 1.820.300.30 1.820.310.29 1.820.310.38 1.820.311.00 1.820.311.07 1.820.316.00 1.820.351.00 1.820.353.83-E 1.820.353.83-V 1.820.385.81-V 1.820.386.81 1.820.387.81-V 1.820.388.81-V 1.820.400.01 1.820.400.02 1.820.400.03 1.820.400.05 1.820.400.06 1.820.400.08 1.820.410.01 1.820.410.02 1.820.410.03 1.820.410.05 1.820.410.08 1.820.410.10 1.820.410.12 1.820.410.13 1.820.420.05 1.820.420.81 1.820.430.06 1.820.430.81 1.820.440.01 1.820.440.02 1.820.440.03 1.820.440.08 1.820.441.01 1.820.441.03 1.820.441.08 1.820.450.01 1.820.450.02 1.820.450.03 1.820.450.05 1.820.450.08 1.820.462.00 1.820.472.00 1.820.472.04 1.820.492.00 1.820.495.00 1.820.497.00 1.820.499.00 1.820.500.03 1.820.500.04 1.820.500.07 1.820.500.08 1.820.500.09 1.820.500.12 1.820.500.29 1.820.500.41 1.820.500.42 1.820.502.00-V 1.820.507.00 1.820.510.00 1.820.520.81 1.820.530.00 1.820.532.00 1.820.550.00 1.820.550.01 1.820.550.03 1.820.550.04 1.820.550.10 1.820.550.14 1.820.550.15 1.820.551.00 1.820.572.00 1.820.572.01
Spare Part Bumper Dust cover Plastic for all Models Movable rail Kit (2 piece) Rear Panel MCH hinged Cover to TD Control Rack Label Internal Nr-System Line Connector Panel 8-Channel with XLR Plugs Mains Transformer (Exchange) Power Supply MCH Power Supply MCH Tape Tension Sensor left 1" Tape Tension Sensor right 1" Tape Tension Sensor left 2" Tape Tension Sensor right 2" Guide Roller left 1/4" Guide Roller right 1/4" Stabilizer Roller left 1/4" Cover to Roller 1/4"+1" Cam Stud Tacho Roller 1/4" Guide Roller left 1/2" Guide Roller right 1/2" Stabilizer Roller 1/2" Cover to Roller 1/2" Tacho Roller 1/2" Guide Roller 1/2" Guide Roller 1/2" Guide Roller 1/2" Cover for Pinch Roller 1/4"-1" Pinch Roller 1/4" Pinch Roller 1/2" worked Pinch Roller 1/2" Guide Roller 1" Guide Roller 1" rustproof Stabilizer Roller 1" Tacho Roller 1" Guide Roller 1" special Stabilizer Roller 1" special Tacho Roller 1" special Guide Roller 2" Guide Roller 2" rustproof Stabilizer Roller 2" Cover to Roller 2" Tacho Roller 2" Pinch Roller 1" Pinch Roller 2" Cover for Pinch Roller 2" Conversion Kit Compensating Lever 2" (GIZMO) Conversion Kit to Scissors for cutting in Front of Repro Head Conversion Kit A820 1/2" 2-Trk Stereo to 1/4" 2-Track/Stereo Conversion Kit A820 1/4" 2-Trk Stereo to 1/2" 2-Track/Stereo Side wall Electronic Rack left Side wall Electronic Rack right Hinge to Electronic Rack Bush to Hinge Hinged Cover Pin to Cover Hinge Hexagonal socket Fillister Head Screw special Adhesive Label Adhesive Label CONTROL+2CH+TC Connector Panel XLR Key Bolt Power Supply Electronic Mains Transformer Mains Filter Charging Capacitor complete Overbridge big Mask Monitor Side Panel left Side Panel right Shelf Compartment short Side Panel Overbridge left black Side Panel Overbridge right black Panel-Neck complete Overbridge Shelf Side wall Overbridge left (Wood)

Page 85/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 110.00 200.00 495.00 590.00 515.00 180.00 250.00 670.00 535.00 670.00 320.00 565.00 475.00 300.00 510.00 86.00 145.00 125.00 50.00 71.00 295.00 465.00 335.00 615.00 1'030.00 120.00 425.00 1'120.00 585.00 150.00 435.00 150.00 415.00 465.00 370.00 420.00 150.00 760.00 275.00 530.00 240.00 155.00 695.00 955.00 395.00 60.00 455.00 250.00 185.00 550.00 1'070.00 205.00 84.00 105.00 170.00 550.00 91.00 445.00 380.00 290.00 94.00 320.00 245.00 230.00 56.00 235.00 350.00 900.00 400.00 1'190.00 685.00 200.00 13.00 14.00 140.00 80.00
Order No. 1.820.773.83 1.820.774.27-E 1.820.774.27-V 1.820.775.82-V 1.820.777.84-V 1.820.778.82 1.820.781.31 1.820.782.25 1.820.783.26 1.820.784.25 1.820.785.26 1.820.786.24-V 1.820.786.33-V 1.820.787.25 1.820.788.21 1.820.791.00 1.820.793.82-E 1.820.794.81 1.820.795.00 1.820.796.00 1.820.799.81 1.820.800.21 1.820.802.00 1.820.806.00 1.820.807.00 1.820.808.83-E 1.820.808.83-V 1.820.809.00 1.820.810.00-V 1.820.811.81-E 1.820.811.81-V 1.820.813.81-E 1.820.813.81-V 1.820.814.00 1.820.814.81 1.820.815.00-V 1.820.816.00 1.820.817.81 1.820.820.81 1.820.821.81-V 1.820.822.81 1.820.823.00 1.820.824.00 1.820.825.00 1.820.826.00-V 1.820.828.00 1.820.830.84 1.820.830.84-E 1.820.831.81 1.820.832.81-E 1.820.832.81-V 1.820.833.00 1.820.835.00 1.820.836.00 1.820.837.00 1.820.838.00-V 1.820.839.00 1.820.841.00-V 1.820.843.00 1.820.860.00 1.820.861.00 1.820.862.00-V 1.820.863.00 1.820.864.00 1.820.867.00 1.820.869.81 1.820.872.83-E 1.820.872.83-V 1.820.873.83-E 1.820.873.83-V 1.820.875.82 1.820.875.82-E 1.820.878.00 1.820.890.81 1.820.891.00 1.820.892.81
Spare Part Tape Lifter Control Board (Exchange) Capstan Speed Control Capstan Speed Control Spooling Motor Drive Amplifier Spooling Motor Supply Board Distribution Board Audio Rack Microprocessor Unit Tape Deck Control MCH Microprocessor Unit Audio Control Microprocessor Unit VU Panel MCH Microprocessor Unit Master MCH Microprocessor Unit Tape Deck Control Microprocessor Unit Master SW 06/89 Microprocessor Unit Master Microprocessor Unit Audio Remote Interface Microprocessor Unit Audio Control MKII Power Fail Detector Board (Exchange) Opto Sensor Distribution Board Head Assembly Ident. PCB Source Selector Board Extension Board 39-Pole Euro for Audio and Logic Section Microprocessor Unit Tape Deck Control to A820 1/2" MR Mother Board Audio Control Mother Board NRS DOLBY SR/A Mother Board NRS C4E Option (Exchange) Reproduce Preamplifier 8-CH Reproduce Preamplifier 8CH Mother Board NRS Option Reproduce Amplifier (Exchange) Record Amplifier HX-PRO Record Amplifier HX-PRO (Exchange) RF-Driver RF-Driver Line Amplifier with Trafo Line Amplifier with Trafo Internal NRS Controller Interface Noise Redu. to Ctrl. an External Noise Redu. System Master Keyboard Audio Time Code Line Amplifier Time Code Read Unit Spooling Motor Control Tape Deck Counter/Timer Internal Controller SR/A Generator Unit Test Generator Board Upgrade Kit Input Calibration MAIN Soft Start Board (Exchange) MAIN Soft Start Board Pinch Roller Gate (Exchange) Switching Stabilizer Switching Stabilizer Stabilizer +/- 26 V Line Output Sync Connection B Sync Amplifier Board Automation Interface Code Read/Write Unit DUMMY BOARD CH2 Record Amplifier HX-PRO HF-Driver Monitor Amplifier Time Counter Control Board Output Amplifier Line Input Connection Board Line Output Connection Board Metering Board Power Fail Sense Board (Exchange) Stabilizer +5V AUX Voltages Stabilizer +5V AUX Voltages (Exchange) Stabilizer +15/-15V Stabilizer +15/-15 Volt Spooling Motor Drive Amp. (Exchange) Spooling Motor Drive Amplifier Common Suppression Adjust. Kit Junction cable Connection Cable Panel MCH Ribbon cable to Card Library 8-CH

Product D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 D827 D827 D827 D827 D827 D827 D827 Teile D827 D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 D827 Teile D827 Teile D827 Teile D827 Teile D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 D827 Teile D827 D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 D827 D827 D827 D827 D827 D827 Teile D827 D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827 Teile D827

Page 92/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 330.00 215.00 150.00 915.00 260.00 260.00 260.00 160.00 155.00 155.00 915.00 290.00 150.00 150.00 325.00 165.00 165.00 165.00 150.00 150.00 550.00 47.00 275.00 70.00 68.00 24.00 16.00 95.00 740.00 336.00 50.00 227.00 50.00 1'050.00 95.00 830.00 475.00 99.00 165.00 90.00 153.00 190.00 215.00 655.00 23.00 505.00 29.00 22.00 1'455.00 790.00 725.00 28.00 290.00 55.00 55.00 1'180.00 44.00 52.00 14.00 2.00 575.00 97.00 97.00 230.00 620.00 735.00 80.00 140.00 140.00 140.00 140.00 165.00 42.00 23.00 25.00 15.00
Order No. 1.863.781.22 1.863.797.22 1.863.826.22 1.863.875.00-V 1.863.890.21 1.863.891.21 1.863.892.21 1.863.910.20 1.863.913.20 1.863.914.20 1.863.926.21 1.863.926.23 1.863.937.21 1.863.938.23 1.863.940.20 1.863.950.20 1.863.967.21 1.863.968.20 1.863.980.21 1.863.981.21 1.863.995.20 1.863.996.21 1.864.010.01-V 1.864.010.03 1.864.010.06 1.864.010.12 1.864.010.40 1.864.020.88 1.864.020.93 1.864.021.00-V 1.864.021.03 1.864.022.00-V 1.864.030.01 1.864.030.81-E 1.864.031.00 1.864.120.22-V 1.864.125.21-V 1.864.127.81 1.864.130.81-V 1.864.132.00-V 1.864.135.81-V 1.864.140.01 1.864.140.02 1.864.140.21 1.864.140.93 1.864.145.00 1.864.145.01 1.864.145.02 1.864.150.00 1.864.160.82 1.864.170.81 1.864.171.00 1.864.500.01-V 1.864.500.04 1.864.500.05 1.864.510.00 1.864.510.05 1.864.510.06 1.864.510.07 1.864.510.08 1.864.515.20 1.864.550.11 1.864.550.12 1.864.555.01 1.864.555.21-V 1.864.556.00-V 1.864.557.00-V 1.864.901.20 1.864.910.20 1.864.915.21 1.865.010.02 1.865.010.03 1.865.010.04 1.865.010.05 1.865.010.06 1.865.010.08
Spare Part Microprocessor Unit Tape Deck Control to SW V2.01 Software 15/95 TD D827-MCH to SW V2.01 Software 769 LCU to SW V2.0 Spooling Motor Drive Amp. Software Program H to SW V2.0 Software Program M to SW V2.0 Software Program L to SW V2.0 Software 653 Noise Shaper Software 652 MAPRO TMS Program H Software 652 MAPRO TMS Program L Software 655 CPU Main Program to D827 (SW V2.0) Software 655 CPU Main Program to SW V2.02 Software 656 PIF Main Program TDC to SW V2.0 Software 656 PIF Main Program SBC to SW V2.0 Software 660 MAPRO TMS to D827 Software 774 Capstan Control to SW V2.0 Software 659 SSTC Sign.UP (DISSI) to SW V2.0 Software 659 Version 3.0 SSTC Capst. UP (DISCA) Software 685 TMS Program H to SW V2.0 Software 685 TMS Program L to SW V2.0 Setup Handler for D820/D827 MCH Diskette Paraback Front Panel to V-Eight with glassy Side wall left/right Cover Blank Panel AES/EBU Handle Small part Kit Wiring List for Alesis-Kit Power Supply Ventilator for Power Supply Shuttle Aggregat Tape Tension Gauge V-Eight (Exchange) S-VHS Drive REA PRE-AMPLIFIER Main Board Motor Driver Board Connector ELCO Monitor Board Monitor I/O Board I/O Board Meter Display Alphanumeric Display Keyboard Driver Wiring List for Keyboard Driver Keyboard Contact Mat 46 Push-Button Contact Mat 35 Push-Button AD Board DA Board AES/EBU Board Flexprint 40-Pole Flat Ribbon Cable AES/EBU V8 Front Panel to Cockpit with glassy Side wall left Side wall right Remote Keyboard Contact Mat 62 Push-Button Contact Mat 70 Push-Button Contact Mat 21 Push-Button Indication to Contact Mat Remote Control Side wall left for Cockpit Side wall right for Cockpit LEVELMETER DISPLAY Remote Level Board Level Display LED Display Software 140 Keyboard Software 515 Remote Software 555 Remote Level Cover Front Panel Rack Angle Display Window Tray Cover Holder PCB

Spare Part Stabilizer Board +/- 15V Mains Selector Board Dual Stab.Rectifier Board +/Phantom S.B. +/- 12V Board Feed Through Board Power Supply +- 15/24V for Frame 1.918.100.00 Fastening Angle 1U Mains-Power Distr. 1 In/12 Out 19"/1U Power Supply Board Keyboard DSP Board Mains Transformer to DSP Tel.Hybrid Power Supply complete Tape Stop Filter/Relay Board (Exchange) Power Supply 19" 2U 275W Power Supply 19" 2U 275W Power Supply 19" 2U Subboard PSU (Exchange) Dual Power Supply/ Master Dual Power Supply/Master Dual Power Supply/Master Single Power Supply / Master (Exchange) Dual Power Supply/ Slave Dual Power Supply / Slave (Exchange) Single Power Supply / Slave Single Power Supply / Slave Studio TB Box to OnAir 1000 / 2000 Studio TB Box with TB Facilities and Signaling Light PO Patch Cable L=30cm black (Neutrik) PO Patch Cable L=30cm red (Neutrik) PO Patch Cable L=60cm black (Neutrik) PO Patch Cable L=60cm red (Neutrik) PO Patch Cable L=100cm black (Neutrik) PO Patch Cable L=100cm red (Neutrik) Connection Cable 14-Pole 1.5m Master Connection Cable 14-Pole 2.5m Master Connection Cable 14-Pole 5.0m Master Connection Cable 14-Pole 7.5m Master Connection Cable 14-Pole 10.0m Master Connection Cable 14-Pole 15.0m Master Connection Cable 14-Pole 20.0m Master Connection Cable 14-Pole 5.0m Slave Connection Cable 14-Pole 7.5m Slave Connection Cable 14-Pole 10.0m Slave Connecting Cable 14-Pole 15.0m Slave Connection Cable 14-Pole 20.0m Slave Connection Cable 14-Pole 1.5m Slave/AUX Connection Cable 14-Pole 2.5m Slave/AUX Connection Cable 14-Pole 5.0m Slave/AUX Connection Cable 14-Pole 7.5m Slave/AUX Connection Cable 14-Pole 10.0m Slave/AUX Connection Cable 14-Pole 15.0m Slave/AUX Connection Cable 14-Pole 20.0m Slave/AUX RS485 control Cable PC-Monitor Rack Cable RS485 PC-Monitor Desk Blank Panel 1-Unit Push-Button right "PFL" (Exchange) Input Unit Mono Input Unit Mono (Exchange) Input Unit Mono with HL Trafo Input Unit Mono with HL Trafo Input Unit Mono with 2 Mic Inputs Input Unit Mono Input Unit Mono with HL Trafo Input Unit Mono with 2 Mic Inputs Input Unit Mono with HL Trafo+2Mic (Exchange) Group Unit Mono Group Unit Mono (Exchange) Input Unit Stereo HL with Equalizer Input Unit Stereo HL with Equalizer Input Unit Stereo Trafo Input Unit Stereo HL with Equalizer Input Unit Stereo Trafo (Exchange) Master Unit Stereo A Master Unit Stereo A (Exchange) Master Unit Stereo B
Product A980 A990 A980 A990 A980 A990 A980 A990 A980 A990 Bal-U Tel-Hyb Tel-Sys A961 A962 A963 A970 Ampli B. A962 A963 D950 Tel-Hyb Teile Tel-Hyb Teile Tel-Hyb Teile Tel-Hyb Teile Tel-Hyb Teile Tel-Hyb A928 A928 A928 OnAir2 A980 A990 A990 A990 A980 A990 A980 A990 A980 A990 A980 A990 OnAir1 OnAir2 Teile A900 A961 A962 A963 A970 Te. A900 A900 A900 A900 A900 A900 Fremd A980 A990 A980 A990 Teile A980 A990 A980 A990 Teile A990 Teile A980 A990 A990 Teile A990 A990 Teile A990 A990 Fremd A980 A990 A980 A990 Teile A980 A980 A990 Teile A990 Teile A980 Teile D950 Teile D950 Teile A928 Teile Fremd A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928 A928

Product A827 Digimed Digimed Digimed Digimed Digimed Digimed A807 B77 PR99 Digimed Digimed B77 B77 C221 C115 B77 A710 A710 PR99 C270 C270 C270 C270 C278 A807 A812 A816 A820 PR99 B77 A807 A812 A816 Teile A721 A721 C270 A710 A721 A727 A710 A807 A812 A816 A820 A827 D8. A807 A812 A816 A820 A827 D8. A721 A807 A820 A820 A827 V-Eight A807 A812 A816 A820 PR99 A807 A812 A816 A820 A807 A812 A816 A820 A807 A820 A820 A827 A820 A827 A807 A812 A816 A820 A807 A812 A816 A820 A820 A827 A807 A812 A816 A820 A820 D780 A807 A812 A816 A820 Teile A820 A827 A807 A820 A80 A812 A816 A820 A827 A800 A827 D827 Teile D820 A807 A812 A816 A820 A80 A80 A721 A730 D731 D732 A730 D731 D732 D730 A730 D730 D731 D732 A730 D730 D731 D731 D732 D731 D732 A807 A812 A816 A820 A827 D8. A807 A812 A816 A820 A827 A807 A812 A816 A820 A827 D8. A807 A812 A816 A820 A807 A812 A816 A820 A807 A820 A820 A827 A807 A812 A816 A820 A807 A812 A816 A820

Page 110/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 745.00 1'275.00 2'415.00 360.00 415.00 835.00 10.00 10.00 320.00 30.00 10.00 5.80 2'100.00 2'435.00 17.00 26.00 7.80 5.50 500.00 1'890.00 500.00 1'985.00 36.00 120.00 210.00 155.00 11.00 10.00 22.00 1'050.00 1'350.00 12.00 190.00 45.00 135.00 39.00 20.00 20.00 25.00 55.00 43.00 34.00 269.10 65.00 2.00 8.30 8.20 8.00 3'300.00 950.00 5'350.00 6'250.00 6'000.00 6'000.00 8'300.00 3'300.00 3'300.00 950.00 3'300.00 3'300.00 3'300.00 950.00 3'300.00 950.00 3'300.00 50.00 24.00 38.00 65.00 65.00 65.00 65.00 56.00 72.00 125.00 80.00
Order No. 10.253.310.03 10.253.310.04 10.253.310.05 10.253.360.02 10.253.460.02 10.253.460.03 10.258.003.09 10.258.003.10 10.258.006.00 10.291.101.00 10.293.001.01 10.293.001.02 10.300.001.01 10.300.001.02 10.302.001.04 10.302.001.06 10.302.002.01 10.304.001.01 10.312.060.00-E 10.312.280.00 10.312.280.00-E 10.312.300.00 10.319.001.00 10.320.999.03 10.353.001.02 10.353.001.04 10.354.001.00 10.402.001.01 10.402.002.01 10.403.031.00 10.403.050.00 10.416.001.01 10.464.001.00 10.496.010.01 10.496.010.82 10.496.015.00 10.496.020.00 10.496.021.00 10.496.025.00 10.496.026.00 10.496.027.00 10.496.030.00 10.496.065.00 10.496.070.00 10.496.097.00 10.496.098.00 10.496.099.00 10.496.099.01 10.574.101.00 10.574.101.00-E 10.574.106.20 10.574.106.40 10.574.106.81 10.574.106.90 10.574.108.10 10.574.111.81 10.574.111.90 10.574.111.90-E 10.574.113.40 10.574.113.90 10.574.115.19 10.574.115.19-E 10.574.115.20 10.574.115.20-E 10.574.115.81 10.578.400.80 10.578.779.00 10.578.807.01 10.578.807.02 10.578.807.03 10.578.807.04 10.578.807.05 10.578.961.00 10.578.962.00 10.635.001.00 10.680.001.01
Spare Part Test Tape MRL 15ips NAB 1/2" 250nWb/m Test Tape MRL 15ips NAB 1" 250nWb/m Test Tape MRL 2" 38cm/s NAB 15ips 250nWb/m Test Tape MRL 1/4" 15ips, IEC, 320nWb/m Test Tape MRL 30ips AES 1/4" 250nWb/m Test Tape MRL 30ips AES 1/2" 250nWb/m Hexagon pin spanner 2.5mm with handle Hexagon pin spanner 3mm with handle Magnifying Glass, 8-fold Cramolin Spray 200ml Patented Tin 1000ccm Empty Patent Socked 33ccm Empty Tape Tension Meter Tentelometer 1/4-1" Tape Tension Gauge Tentelometer 2" Glass slip yellow to VU-Meter 89.01.0368 VU Meter Glass to 1.810.320.22 Adjust. Screw VU-Meter Solder Sucking Wick Type-AB (Exchange) Dolby Model CAT.280 Dolby Spectral Recording (SR) Module Dolby CAT.280 (Exchange) Dolby Model CAT.280 Dolby A SR CAT.300 Spectral Recording Module R-DAT Cassette for DATA Storage Connecting Cable Box/PC Empty Reel NAB 14" D=14" Metal NAB-Reel 1/2" D=14" Metallic, Empty Adapter XLR 3-P.Female/Female Glass slip to PPM-Meter 1.169.900.00 Glass slip to VU-Meter 1.169.901.00 Tape Transport Control A80 Module Version (with Cable) VARISPEED MODULE VERSION WITH FRONTPLATE GRAY ( W.O. CABLE ) Wax Pencil red Oil Mobil SHC-629 Set of Replacement Towels Cleaning Kit Cleaning Tips (Bag with 50 pce) Cleaner for Brake Drum Bag with 40 Gram Head Cleaner 200ml Cleaner for anodized Surfaces 200ml Cleaner for anodized Surfaces 1 Liter Cleaner MS260 Laser Optics Cleaner Electronic Cleaner Vertrel in PET-Bottle of 1-Litre Aero-Duster 400mL CREME BOX 60ml WHITE Glass Bottle 30ml Plastic Bottle 60ml Plastic Bottle Round 100ml Digital Dual Bargraph PPM with Correlator RTW 11519G-DIN (Exchange) Dig.Dual Bargr.PPM with Correlator RTW 11519G-DIN RTW 1062-Plus PortaMonitor RTW 1064-Plus PortaMonitor incl. table stand Stereo Display, Dual PPM and Correlator RTW 1069-STU Stereo Display, Dual PPM and Correlator RTW 10810-203 Surround Monitor + 8-CH Peakmeter, 203mm wide Analog Dual Bargraph PPM with Correlator RTW 1119G-STU Analog Dual Bargraph PPM with Correlator RTW 1119G (Exchange) Analog Dual Bargr. PPM with Correlator RTW 1119G Analog Dual Bargraph PPM with Correlator British Scala Analog Dual Pakmeter Nordic Scala Digital Dual Bargraph PPM with Correlator RTW 11519G (Exchange) Digital Dual Bargr. PPM with Correlator RTW 11519G Digital Peak Program Meter 11520D (Exchange) Digital Peak Program Meter 11520D Digital Dual Bargraph PPM with Correlator RTW 11519G-STU Dust cover for SC4008 Table- Top Version Dust cover for Mixing Console A779 Dust cover for A807 with Hand- rest 1.727.072.00 Dust cover Plastic for Economy Studio Console w/o Overbridge Dust cover Plastic for Economy Studio Console with Overbridge Dust cover Plastic f. Desk-Top Machine in vertical Position Dust cover Plastic f. Desk-Top Machine in horizontal Position Dust cover for A961 Table-Top Version Dust cover for A962 Table-Top Version Synthetic Oil M350 Alltemp Q NB-50 Paste in Tube of 80g

Product A800 A80 A80 A80 A812 A816 A820 A827 A812 A816 A820 A827 A807 A820 A807 A812 A812 A816 SC4008 SC4008 A820 DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS D827 DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS DYAXIS D940 D940 D940 D941 D940 D940 D941 D940 D941 D940 D941 D940 D941 D941 D940 D941 D940 D941 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D940 D940 D941 D940 D941 Routing Routing D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D940 D941 D940 D941 Routing D940 D941 Routing D940 D941 Routing D940 D941 Routing D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 Routing D940 D941 Routing

Page 115/116

Preise nur fr die Schweiz gltig Prices valid for Switzerland only CHF exkl. MwSt. 640.00 640.00 410.00 410.00 1'040.00 4'235.00 3'565.00 800.00 800.00 1'840.00 2'130.00 1'795.00 800.00 850.00 780.00 2'600.00 1'500.00 9'000.00 10'400.00 10'400.00 5'200.00
Order No. 42.321.151.01 42.321.152.01 42.321.161.01 42.321.162.01 42.321.201.01 42.321.251.11 42.321.252.11 42.321.261.01 42.321.262.01 42.321.281.01 42.321.401.01 42.321.402.01 42.321.403.01 42.321.741.11-E 42.321.742.11-E 42.355.152.25-E 42.355.152.35-E 42.355.276.50 42.355.278.79 42.355.278.89 42.355.278.89-E
Spare Part MOD AR DS-D MADO, REAR MODULE FOR INTERCONNECTION FOR MADO Rear Connector for DS-D MADI MOD AR DS-D AESI, REAR CONNEC- TION MODULE FOR DS-D AESI Rear Connector for DS-D AESO DS-D DA Dual 1/8 AES/EBU Distribution Amplifier DS-D MADO, OPT.MUL.PL.MOD FOR 56 A/CH.IN ASS.W.DS-D&DS-DC4AD DS-D MADI,OPT.DEM.PLEX.MOD.FOR 56 A/CH.IN ASS.W.DS-D&DS-DC4DA DS-D AESI, 2 AES INPUT MODULE DS-D AESO, 2 AES OUTPUT MODULE AES Matrix 8x1 DS-D M81 DS-D ARG Sync Gen DARS AES high precision sync generator DS-D VS Sampling Clock Generator Video Synchronized DS-D WCD Wordclock Distr. Amplifier 1 to 6 (Exch) DS-D C4DA,2 Ster.Analog to AES/EBU Convert. 44.1/48kHz (Exch.) DS-D C4DA, 2 AES/EBU to Analog Convert. 44.1/48kHz (Exchange) C PAP 20/3 PAP Board 20/3 Version (Exchange) Summing Board SOMMA C 3 Preamp Micro, 3 Micro Amplifier Board PAP Plus Board 256K Memory DSP Board w.256k+8x32k Memory PAP+ (Exchange) DSP Board with 256k+8x32k Memory PAP+
Product D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 D940 D941 Routing D940 D941 D940 D941 D940 D941 D940 D941 D940 D941

Page 116/116

Convert your standard ReVox B77/PR99 into a well performing Tape Project machine (Rev 2). Arian Jansen. Updated: March 31, 2008 (PR99 mkII and PR99 mkIII temporarily removed from this document.) Last year Paul Stubblebine, Dan Schmalle and Michael Romanowski, all gentlemen with a good reputation in the recording industry started an initiative called The Tape Project. The purpose of this initiative is to make second generation very high quality reel to reel tape copies of great analog recordings available to the public. For more details on the initiative and the available titles visit the website of The Tape Project (www.tapeproject.com ). The albums made available by the Tape Project come on two 10.5 reels of tape that are recorded in 2 tracks at 15ips using an IEC (CCIR) equalization curve. These parameters were purely chosen to get the very best audio performance possible. I have to say that the result is absolutely stunning and these Tape Project albums really constitute the ultimate analog when played on a high end reel to reel play back system. Although the last consumer reel to reel recorder came off the production lines years ago, there are still plenty of them around. However, since the reel size that the tape deck must be able to handle has to be 10.5, the majority of those decks are not suitable. The requirement for 2 tracks instead of the more common 4 tracks again takes away the majority of the available decks. 15ips reduces the number of candidates even further and finally the requirement for an IEC EQ cuts most of the candidates that were left. If after this deduction you still have some enthusiasm left, let me add that most of the candidate decks left were made in the late 70s and early 80s which was a pretty sad era for high end audio, mainly because of the questionable design philosophies of the electronics at that time. That means that many of the reel to reels from those days sound pretty disappointing. So does that mean that the Tape Project is a waste of time? No, because there are options, albeit not all of them necessarily easy or cheap. With respect to the cost, keep in mind that we are talking about the ultimate analog here. Some people spend tens of thousands of dollars on vinyl playback. With the Tape Project tapes you can match or exceed the performance of the best vinyl for a significantly lower cost. You can pick up professional studio tape decks from Studer, Telefunken or Ampex for reasonable prices. Furthermore there are places that sell custom electronics for consumer/ semi professional tape decks that can match or exceed the performance of the professional studio decks. This article will describe a method to convert two of the more easily available consumer/semi professional reel to reel recorders into a remarkably good playback deck for Tape Project tapes. I am talking about the standard ReVox B77 and its professional cousin the ReVox PR99.

ReVox B77 MKII

ReVox PR99
The standard B77 comes with two speeds, 3 ips and 7 ips and has NAB EQ. There is also a 7 / 15 ips version available but that one is harder to find and almost always has a NAB EQ. The PR99 is about equally available in the 3 / 7 ips version as in the 7 / 15 ips version but also almost always with a NAB EQ. There are two good reasons to look at the B77/PR99. First, the availability is pretty good for very reasonable prices. Many people may even have a standard B77 sitting around. But more important, the play back electronics, albeit based on 70s design philosophy, is well designed and makes use of high quality components. That is a significant advantage over pretty much every other consumer deck from that era. In this article I will describe how to easily convert a standard 3 / 7 ips NAB B77 or PR99 into a 7 / 15 ips playback only version with an IEC(CCIR) EQ for 15ips and a NAB EQ for 7 ips. All (eight) components necessary to make this conversion are already present in the machine, so no new components need to be procured. On the flip side, the recording function will no longer be available.

First some important general remarks: If you do not live in North America you can stop reading this because the speed change wont work. This modification requires the ability to desolder, remove, and resolder components from and to circuit boards without damaging the parts or the circuit boards. You can view a tutorial on how to do this at http://tangentsoft.net/elec/movies/. Practice on a circuit board from an old component or computer until you are confident that you have the skill to work on your tape machine circuit boards without damaging them. An obvious one: There are no resistors you can change to convert a 4 track machine into a 2 track machine, so you need to start from a 2 track machine. The record function will only be disabled if you strip the necessary components from the record circuit boards as described in this article. It is not necessary to disable the record function if you put in new components, but the record EQs will not match with the new playback EQs. This modification is valid for the ReVox B77, B77 mkII and the PR99. Some of the PR99 mkII and all of the PR99 mkIII versions use a different reproduce board. Modifications for those machines will be published later. This modification is also possible on the PR99 reproduce only, but only with new components because there are no record circuit boards to strip the components off. Furthermore, the tape speed calibration as described in this article can not be carried out that way. A very similar modification can also be done on the ReVox A77 mkIV, but not on the earlier revisions. Details for that modification will not be discussed here. If you have one of these decks available for this conversion, just use it. However, if you still have to buy one, go for the B77 mkII version. The main reason is that ReVox changed component suppliers around that time and has been using high performance Beyschlag and Philips components in those later revisions. The improvement in audio performance is considerable because of that. The exact appearance of the components on the boards can differ from unit to unit because over time different component manufacturers have been used. The values of the components and the placement on the boards will be the same, though. The pictures used here are of a B77mkII and a PR99 (mkI). The pictures of the boards are coming from either the B77mkII or the PR99 so the exact appearance of the components may not always link up in the pictures. Do not buy a PR99 over a B77 because of the balanced outputs !! The balanced outputs do not sound very good and will need to be by-passed for the best result, which fortunately is very easy as youll see at the end.
The modification. Before starting the actual modification it is necessary to make a reference tape that will be used to recalibrate the tape speed after the modification is carried out. To make the test tape you need to have a

tone generator of some sort that can generate a stable and repeatable tone of preferably 1000Hz. Any frequency between 200Hz and 1000Hz will be OK as long as it is a stable and repeatable source. This can be in the form of a CD with test signals, for instance, or even better a tone generator for a PC. A very convenient and easy to use tone generator that runs on pretty much any PC can be downloaded as a free trial from the NCH Swift Sound Software website www.nch.com.au/tonegen. To make the reference tape: Before making the reference tape, make sure the machine has been switched on for about an hour so that it has reached its normal operating temperature. Set your B77/PR99 for a tape speed of 7 ips. (Make sure the varispeed is switched off for mkII and III versions.) Load a tape on the recorder. Preferably on 10.5 reels for better stability. Record a 1000Hz tone on both channels at approx. 6dB. Run the recording for at least 5 or 10 minutes, so you have enough time to do the speed re-calibration later on. Take the tape of the recorder and put it aside until the modification is carried out.
Now it is time to remove the cover of the deck and heat up your soldering iron. To remove the back cover put the deck face down on a soft surface. The carpet for instance. Remove the four screws (0) from the back and lift the back cover/cage off the machine.
Remove the bottom cover by removing the two screws (0) in the corner.
Pull out the oscillator PCB () (notice also the connector on the side), the record PCB () and the reproduce PCB ().
Remove the capstan controller PCB by removing the one screw () at the bottom and pulling of the three faston () connectors for the varispeed.
We will now do the modification for the tape speed. The capstan speed controller uses a so called Phase Locked Loop (PLL) circuit that locks the capstan motor rotation speed to a reference frequency. The reference frequency in this case is 800Hz. If we increase that reference frequency to 1600Hz, both tape speeds of the recorder will be doubled, changing it from a 3 / 7 ips machine to a 7 / 15 ips machine.

In order to change the reference frequency to 1600Hz we have to remove the 4700pF timing capacitor (0) and replace it with a 1600pF capacitor. There is no 1600pF capacitor available in the record electronics of the B77/PR99, but there are two 3300pF (0) capacitors available on the record PCB (). If we put them in series we get a 1650pF capacitor. Thats close enough. The pictures below show where to find the 3300pF capacitors and how to put them in series on the correct location on the capstan controller board.

The record PCB ().

The modified capstan controller board.
Now plug the capstan controller board back in the machine and screw it back down to the chassis. The speed modification is now done, but still needs to be adjusted using the reference tape you made before ripping the machine apart (You did make it, didnt you.)
We will now change the playback EQ on the reproduce amplifier board. First we will remove some components from the record PCB (). These components will be used on the reproduce PCB () to modify the EQ. Remove the two 1k resistors (0), the two 680 resistors (0) and the two 220k resistors (0) from the record PCB ().
Then remove the two 5.6k resistors (0) from the reproduce PCB (). These resistors will not be used again. Now remove the two 3.9k resistors (0) from the reproduce PCB () and move () them to the position of the 5.6k resistors (0) that we removed in the previous step.

The reproduce PCB ()

The reproduce PCB () after modification.
Now lift up the 330k resistors (0) on the reproduce PCB () on one side and put the 220k resistors (0) we pulled from the record PCB () in series with the 330k resistors (0). Then take the 1k resistors (0) and the 680 resistors (0) from the record PCB () and put them in series to form 1680 resistors. Put these in the former location of the two 3.9k resistors (0) on the reproduce PCB (). This completes the modification of the EQ.
Now a small modification will be done to improve the audio performance of the playback electronics. As mentioned earlier, the circuit design of the playback electronics of the B77/PR99 is quite good. However, the component choice of at least two capacitors in the playback circuitry is quite poor. Fortunately we can replace these two capacitors by two real good quality capacitors found on the oscillator PCB (). Remove the two 220pF polystyrene capacitors (0) from the oscillator PCB (). Remove the two 100pF ceramic capacitors (0) from the reproduce PCB ().

After removing the two 100pF ceramic capacitors (0), replace them with the two 220pF polystyrene capacitors (0) from the oscillator PCB (). Since the two 220pF polystyrene capacitors (0) are quite a bit bigger, it is easier to solder them on the bottom of the PCB. (The function of the two 100pF ceramic capacitors (0), is to keep the output amplifiers stable. Replacing them by 220pF will reduce the maximum frequency of the output amplifiers from 1.4MHz to 630kHz. Still way higher than youll ever need, since the maximum frequency via the tape will be around 30kHz at 15ips (24kHz at 7ips).) An additional improvement to the audio performance can be achieved by removing two transistors (0). These transistors are used to mute the output signal during fast forward and rewind or when the
tape is stopped. By removing these transistors you will hear sound during fast forward and rewind, but since the tape is lifted from the heads in that case the residual sound is not very loud.
Now it is time to put the reproduce PCB () back into the machine. Be careful to put the pins in the correct sockets. (It is very easy to put the PCB in the sockets with all the pins one position shifted.) Since the oscillator PCB () and the record PCB () are no longer functional and to protect your tapes against accidental erasure, do not put these two PCBs back in the machine. Put the bottom cover back in place and reassemble the two screws. (The plug-in PCBs all have to fall into the respective notches in the bottom cover to keep them in place. You may have to wiggle the PCBs a little to make them fall in place.) Do not put the back cover on yet, because the tape speed still has to be calibrated.
Tape speed re-calibration. The capstan motor of the B77/PR99 is a synchronous AC motor. That means that the maximum motor speed is determined by the frequency of the AC power from the wall. In the US where the AC frequency is 60Hz, the maximum tape speed you can achieve with a standard B77/PR99 is approximately 16ips. Just enough to meet the 15ips we are looking for. In pretty much the rest of the world, the AC frequency is 50Hz, which corresponds with a maximum tape speed for a standard B77/PR99 of 13.3ips. So, no chance there to ever get to 15ips. Lower speeds than the maximum speed are achieved by allowing the motor to magnetically (not mechanically) slip from that maximum speed determined by the AC power frequency. Since 15ips is not much lower than 15.5ips it would be beneficial to have as much power available to regulate the speed reliably to 15ips. The AC voltage in the US normally lies in between 110Vac and 120Vac. The voltage selector of the B77/PR99 is normally set for 120Vac, which means that it runs below nominal voltage in most cases. For reliable 15ips operation I would strongly recommend to put the voltage selector of the B77/PR99 at 100Vac. Even at AC voltages as high as 125Vac, there is no risk in setting it for 100Vac.

Move the voltage selector at the back of the machine from 120Vac to 100Vac. (Unplug the power cord before changing the voltage selector !!)
The speed re-calibration will be done by mixing the recorded test tone together with the original tone coming from the tone generator. When two tones of slightly different frequency are mixed together, the result will be a tone that goes up and down in volume in a continuous wave. The closer the two frequencies are, the slower the interference wave.
Now plug the AC cord in and switch the machine on. (It is again better to run the machine for an hour or so to bring it up to normal operating temperature.) Set the tape speed selector on 3 ips. Because of the modification the machine should now actually run at 7 ips. Connect your 1000Hz generator to the AUX (LINE) inputs of your B77 (PR99). Put the test tape you made earlier on the recorder. Set the MONITOR (OUTPUT) selector at STEREO. Set the MONITOR (OUTPUT) switch to INPUT (INPUT/SYNC). Set the RECORD LEFT (INPUT CH1) at AUX (LINE). Set the RECORD RIGHT (INPUT CH2) at LR (CH1CH2). For PR99 only, switch the UNCAL on (red) Adjust the LEFT (CH1) INPUT LEVEL knob to 6dB on the left VU meter. Now start the test tape. Adjust the RIGHT (CH2) INPUT LEVEL knob to 6dB on the right VU meter.
Now move the MONITOR (OUTPUT) selector to MONO. You will no hear the volume of the tone going up and down continuously. You will also see that on both VU meters.
It is now time to adjust the tape speed by adjusting the tape speed trimmer on the capstan speed control board (0). Turning the trimmer clockwise will increase the tape speed. Use a small isolated screwdriver to adjust the trimmer. Adjust the trimmer so that the volume change goes slower and slower until the volume of the tone remains almost constant. You wont be able to adjust it perfectly, so if the volume change is less then one cycle per second it is OK. The speed is then within 0.1% of what it originally was before the modification. That completes the speed re-calibration.
You can now put the back cover back and your B77/PR99 is ready to play.
When the tape speed selector is set for 3 ips, the real speed will be 7 ips and the play back EQ will be NAB. This setting can be used for playing normal 2 track / 7 ips commercial tapes. When the tape speed selector is set for 7 ips, the real speed will be 15ips and the play back EQ will be CCIR. This setting can be used for playing the Tape Project tapes.

Just one more important remark with respect to the PR99. Where in the B77 the signal from the reproduce amplifier goes almost immediately to the output RCAs, in the PR99 the signal first goes through several opamps, potmeters, relays, transistors and transformers before ending up at the output XLRs. All those components have a negative effect on the sound quality that is quite audible in the form of typical semiconductor and transformer colorations. The good news is that the signals that come straight from the reproduce amplifier are available at the MONITOR output connector of the PR99. At that point you will get the same sound quality as from de B77. Even though the MONITOR connector is a 7-pin DIN, you can use a normal 5-pin DIN because of the pin out of the MONITOR connector.

GND Right

So how does it sound? As mentioned earlier the stock electronics of the B77/PR99 and especially those of the later MKII and MKIII revisions are about the best you can get in semi-professional tape decks from that era (late 70s until the early 90s). The two modifications (the polystyrene caps and the muting transistors) will bring the playback performance up to an even higher level. Listening to the TP tapes, it immediately becomes clear that the coloration, or better the lack thereof, reaches a level that is almost unmatched by any digital (CD,SACD,DVDA) or analog (Vinyl) medium. Also the dynamics immediately stand out as exceptional. The large three dimensional soundstage reminds me of the best vinyl playback Ive heard but without the restless background noise and the filthy colorations at the sides of the soundstage that are virtually unavoidable with the vinyl medium. When compared to my Studer A810 with fully custom tube playback electronics, it becomes clear that the modified B77/PR99 is still not completely clear from solid state coloration. And even though the soundstage on the A810 is not much larger than on the B77/PR99, the focus and stability of the instruments and the air around them are still noticeably better on the A810. So for those of us that do not have a $20,000 CD player or a $30,000 vinyl playback system, these Tape Project tapes on the modified B77 or PR99 as described in this article will provide a whole new level of audio performance for a very reasonable price. The modified B77 or PR99 will also be able to get close to the maximum out of your 7 ips 2 track pre-recorded R2R tapes.