USER MANUAL

TIME SETTING Standard

Lorem ipsum TOUCH / FUN

ABC Minute Hour
A: Normal position of the crown C: Position for setting the time To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
To set the time, pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.
DATE OR DAY SETTING STANDARD

READJUSTMENT TOUCH / FUN

TEST / OK

5 sec.

ADJUST HAND/+HOUR

Go to 12

pull within 5 sec.

ADJUST HAND/+MINUTES

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
Push crown for 5 seconds. If both hands go to 12 oclock, test is ok. Push crown again and hands go back to time. If hands are not exactly at 12 oclock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counter clockwise to readjust minute hand. Push crown back and hands turn back to show time.
LOOMI FUNCTION: DISPLAY TOUCH LOOMI

TOUCH YOUR SWATCH

POP-IN

LOOMI ON

~4 secs.

LIGHT FUNCTION

POP-OUT

POP ON CLOTHES

Note: Wear your Swatch simply with its band or try popping it directly onto your clothes.

TOUCH ALARM

SHOW ALARM TIME ALARM ON/OFF
Touch your Swatch. Hands move to show alarm time for approx. 4 seconds.

.CHANGE ON/OFF

SHOW LAST ALARM

STOP ALARM

.SET NEW ALARM
Touch your Swatch to stop alarm.
Switch alarm on/off and set alarm time Press crown and hands go to actual mode on or off. Press crown again to change mode. Pull crown to position 1 and the hands go to the last alarm time. To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours). Then push crown back and hands turn back to time and alarm mode will be on.

TOUCH GAME

ALARM DEMO

2 sec.

Press crown for 2 seconds to start alarm demo. To stop, press crown again.

Touch your Swatch.

Hands come together at 12 oclock and start to rotate at least on full turn. IMPORTANT: When the hands do not show correctly ONOFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock). IMPORTANT: If hands are not exactly at 12 oclock, they have to be readjusted.
Hands stop by accident and show the result of your game for some seconds..then, hands turn back to time.
SCUBA FUNCTION: ELAPSED TIME
Using the adjustment ring For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.

WARNING NOTE

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water. CAUTION: The Irony Scuba 200 Chrono is not a professional diving watch.

USER MANUAL

Display Standard
A J B C = 1/10 sec. D E F G H

TIME SETTING

Chrono automatic

A B D H E F I C2 G

Retrograde
G A1 C1 = 1/2 min. D E F I H B
A: A1: A2: B: C: C1: C2: D: E: F: G: H: I: J:
Minutes counter (60 minutes) 5 minutes counter (60 minutes) Minutes counter (30 minutes) Seconds counter 1/10 second counter 1/2 minutes counter 6 minutes counter (6 hours) Push-button Crown Push-button Hours hand Seconds hand Minutes hand Light Function
Normal position of the crown Position for setting the time
T o set the time, pull the crown out to posi-tion C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

DATE SETTING

SPLIT TIME Standard RETROGRADE
To set the date, pull the crown out to position B and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
Press 1. The upper push-button to start the chronograph. 2.The lower push-button to read the intermediary time. 3.Once again to continue (repeat the las two actions as many times as you wish to read the intermediary time while the chrono carries on). 4.The upper push-button to stop finally. 5.The lower push-button to reset.

TIMing mode

ADD FUNCTION

STANDARD

RETROGRADE

CHRONO AUTOMATIC

Press 1. The upper push-button to start the chronograph. 2.Once again to read the elapsed time. 3.The lower push-button to reset. Retrograde: The duration of timing is limited to 2 hours.
Press 1. The upper push-button to start. 2.The upper push-button to read the firs time. 3.The upper push-button to restart the chronograph. 4.The upper push-button to read the additional time (repeat these two steps as many time as you wish). 5.The lower push-button to reset.
TACHYMETER Standard RETROGRADE

READJUSTMENT Standard

ABC 2 ABC

ABC ABC

Measure the speed Base 100 or 1000 m. Press. 1. The upper push-button when an action starts. 2. Once again to stop after a distance of 100 or 1000 m. Read the speed indica- ted by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph). 3.The lower push-button to reset.
Adjusting the chronograph (e. g.: after battery change or a hard shock) 1. Pull the crown to position B. 2.Press the upper button to reach the position 12h00 with the hand of the 1/10 seconds counter. 3.Press the lower button to reach the position 12h00 with the hand of the seconds. 4.Pull the crown to the position C. 5.Press the upper button to reach the position 12h00 with the hand of the minutes counters. 6.Press the crown to position A.

IRONY CHRONO MEDIUM

ABC 3 ABC ABC 3
Adjusting the chronograph (e. g.: after battery change or a hard shock) 1.Pull the crown to position B. 2. Press the lower button to reach the position 0 with the hand of the minutes counter. 3.Press the crown to the position C. 4.Press the upper button to reach the position 3h00 with the hand of the seconds counter. 5.Press the lower button to reach the position 0 with the hand of the 1/2 minute counter. 6.Press the crown to position A.
Adjusting the chronograph (e. g.: after battery change or a hard shock) 1.Pull the crown to position B. 2.Press the lower button to reach the position 12h00 with the hand of the minutes counter. 3.Press the crown to the position C. 4.Press the upper button to reach the position 12h00 with the hand of the seconds counter. 5.Press the lower button to reach the position 12h00 with the hand of the 1/10 sec. counter. 6.Press the crown to position A.

SKIN CHRONO

P2 P1 P1
Adjusting the chronograph (e. g.: after battery change or a hard shock) 1. Simultaneously P1 + P2 until A, B and C complete the cycle. 2.P2. A completes a whole cycle. 3.P1 to align A. 4.P2 again, and B completes a whole cycle. 5.P1 to align B. 6.P2 again, and C completes a whole cycle. 7. P1 to align C. 8.Simultaneously P1 + P2 again, to com plete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If P1 + P2 are not pressed within 5 seconds, the watch will carry out the acknowledge ment function automatically.