Reviews & Opinions
Independent and trusted. Read before buy Sylvania DVR90DEA!

Sylvania DVR90DEA

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sylvania DVR90DEA, size: 2.8 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sylvania DVR90DEAAbout Sylvania DVR90DEA
Here you can find all about Sylvania DVR90DEA like manual and other informations. For example: dvd recorder manual, dvd recorder.

Sylvania DVR90DEA manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sylvania DVR90DEA please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sylvania DVR90DEA photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Connections

Connections.13
Connection to a TV.13 Connection to a cable box or satellite box.14 When connecting to a cable box or satellite box with only a few scrambled channels.14 When connecting to a cable box or satellite box with many scrambled channels.14 Connection to an Audio System.15

Getting started

Getting started.16
Easy DVD recording.16 Channel setting.18 Getting channels automatically.18 Adding/deleting channels.19 Selecting the TV stereo or SAP.20 Clock setting.21 Auto Clock Setting.21 Manual Clock Setting.22 Setting the daylight saving time.24 Selecting the TV aspect ratio.25

Editing.57

Information on disc editing.57 Guide to a title list.57 Editing discs with Video mode.57 Editing discs with VR mode.58 Editing DVD-RW discs in Video mode.59 Deleting titles.59 Putting names on titles.60 Setting or clearing chapter markers.62 Editing DVD-RW discs in VR mode (Original).63 Deleting titles.63 Deleting parts of titles.64 Putting names on titles.65 Setting or clearing chapter markers.67 Setting pictures for thumbnails.68 Setting titles to protect.70 Releasing titles from protecting.71 Editing DVD-RW discs in VR mode (Playlist).72 Deleting titles.72 Deleting parts of titles.73 Putting names on titles.74 Setting or clearing chapter markers.76 Setting pictures for thumbnails.77 Adding titles to a Playlist.79 Deleting a Playlist.80 Editing DVD-R discs.81 Deleting titles.81 Putting names on titles.82 Recording Playing discs

Recording.26

Information on DVD recording.26 Information.26 Recording speed.26 Restrictions on recording.26 Information on copy control.27 Making discs playable in other DVD player (Finalize) 27 Formatting a disc.28 Settings for the recording format to a blank disc.28 Reformatting a disc.30 Basic recording.31 Checking the recording picture quality.32 One-touch timer recording.33 Timer recording.34 Hints for timer recording.36 Settings for an external source.37 Connection to an external source.37 Recording from an external source.38 Finalizing the discs.39 Setting a disc to protect.40
Editing Changing the SETUP menu
Changing the SETUP menu.83
Tour of the SETUP menu. Settings for Language. Settings for Display. Settings for Audio. Settings for Parental lock level Troubleshooting Language code. Glossary. Specifications.83.84.86.88.90.92.95.96.97

Others

Playing discs.41
Information on DVD play.41 Guide to displays.41 Basic playback.42 Playback.42 Playing discs using the disc menu.44 Playing discs using the title menu.45 Special playback.46 Resume play.46 Fast forward / Fast reverse.46

Others.92

Espaol

Espaol.98

Page 6

Functional overview (contd)
Remote Control 14. REPEAT button Press to display the repeat setting menu. 15. ZOOM button During playback, press to enlarge the picture on the screen. 16. OPEN/CLOSE A button Press to open or close the disc tray. 17. TIMER PROG. button Press to display the timer program setting menu. 18. Number buttons Press to select channel numbers. Press to select a title/chapter/track on display or a TV channel. Or press to enter values for the settings in the SETUP menu. 19. CM SKIP button During playback, press to skip the 30 seconds. 20. SKIP H button During playback, press to skip to the previous chapter or track. Or during play is paused, press to play reverse step by step. SKIP G button During playback, press to skip to the next chapter or track. Or during playback is paused, press to play forward step by step. 21. FWD D button During playback, press to play fast forward. Or during playback is paused, press to play slow forward. 22. MENU/LIST button Press to display the Disc menu. To change ORIGINAL and PLAYLIST on the TV screen. (VR mode only) 23. ENTER button Press to confirm or select menu items. 24. K / L / { / B buttons Press to select items or settings. 25. RETURN button Press to return to the previously displayed menu screen.

REC MONITOR

DISPLAY.@/: 1 GHI 4 PQRS 7
TIMER PROG. ABC 2 JKL 5 TUV 8 SPACE 0

OPEN/CLOSE

DEF 3 MNO 6 WXYZ 9 CM SKIP

REC SPEED CLEAR

TOP MENU

MENU/LIST

REPEAT

RETURN

1. POWER button Press to turn the DVD recorder on and off. If timer programmings have been set, press to set the unit in timer-standby mode. 2. DISPLAY button Press to display or change the on-screen display. 3. CH K / L buttons Press to change the channel up and down. 4. REC MONITOR button Press to check the video to be recorded before attempting. 5. REC SPEED button Press to switch the recording speed. 6. CLEAR button Press to clear the password once entered or to cancel the programming for CD or to clear the selecting marker number in the marker setup mode or to clear the program once entered in the timer recording setting mode,etc. 8

SETUP/DISC/CD menu

Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by K / L / { / B button.Then, press ENTER button to display each menu. These provides entries to all main functions of the DVD recorder.
SETUP is available only in the Stop mode. DISC is available only when a DVD-R/RW disc is inserted into the DVD recorder. When playing back a DVD-Video disc (commercially available) or the finalized DVD-R disc, you cannot select DISC. CD is available only when an Audio CD disc or a CD-R/RW disc with MP3 files is inserted into the DVD recorder.

Setup Menu

Disc Setting

CD Playback Mode

Edit Format Finalize

Random Play Program Play

Playback Setting

Disc Protect OFF

1. Edit: Turns on a title list, (When a disc with VR mode is inserted, 'Original' or 'PlayList' is available.), which shows the recorded titles on the disc. 2. Format: Allows you to erase all of the recorded content on the disc. The disc will be completely blank. 3. Finalize: Allows you to finalize a disc recorded titles. 4. Disc Protect (VR mode only) : Allows you to protect a disc from accidental editing or recording.
1. Random Play: To set the random play programming. 2. Program Play: To set the program playing.
1. Playback: To set up the DVD recorder to play discs as you prefer. 2. Recording: To set up the DVD recorder to record to discs as you prefer. 3. Display: To set up the OSD screen and the front display of the DVD recorder as you prefer. 4. Select Video: To choose a line input to record to DVD discs from other video equipment. 5. Clock: To set up the clock of the DVD recorder as you need. 6. Channel: To make the channel setting of the DVD recorder as you prefer. 10

Page 11

DISPLAY menu
Press DISPLAY button to call up the display menu.This menu will give you the information on the playing disc. Some operations are available while disc is playing. Details are on page 41. 1. Indicates a disc type and a format mode. 2. Indicates a recording mode and possible recording time. 3. Indicates a title number, chapter number, and the time lapse of disc play. 4. Each icon means: : Search : Audio : Subtitle : Angle (except VR mode) : Repeat : Marker : Noise Reduction : Zoom

L1 (Rear) L2 (Front) Video In S-Video In
L1 (Rear) L2 (Front) S-Video In Video In

Page 38

Settings for an external source (contd)
Recording from an external source
Before recording from an external source, see the instructions for the connection on page 37. 1. Turn the TV and the DVD recorder on, and be sure to select the input of the TV to which the DVD recorder is connected. 2. Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. This operation may take a while to be recognized. 3. Select the input of the DVD recorder which the external equipment is connected. (L2 or L1) To use the input jacks on the back of this unit, select L1 position by pressing [0], [0], [1] on the remote control or the CH L / K buttons. To use the input jacks on the front of this unit, select L2 position by pressing [0], [0], [2] on the remote control or the CH L / K buttons. 4. Select a recording speed using REC SPEED button. Refer to Recording speed on page 26.

XP SEP SP SLP LP EP

5. Press REC button on the DVD recorder to start recording. 6. Press Play button on the external source to record from. 7. Press STOP C button on the DVD recorder to stop recording. This operation may take a while to be completed.

Page 39

Finalizing the discs
You will need to finalize the discs recorded in Video mode to play in other DVD players. Finalizing discs in Video mode automatically creates title menus.
Select Yes using { / B buttons, then press ENTER button. Finalizing will start.
Setup Menu 58% Finalizing
Once you have finalized a disc recorded in Video mode, you cannot edit or record anything else on that disc. A VR mode disc can still be recorded and edited on this recorder even after finalizing. When you insert a DVD-RW disc finalized with this DVD recorder, Undo Finalize will appear instead of Finalize.
Edit Format Undo Finalize
Select DISC using { / B buttons, then press ENTER button. DISC menu will appear. Video mode:
To cancel finalizing, press STOP C button.
Do you want to cancel? Yes No

58% Finalizing

Select Yes, then press ENTER button. Finalizing is cancelled, then the DVD recorder will be in stop mode.
Select Finalize using K / L buttons, then press ENTER button. Option window will appear.

Finalizing is complete.

100% Finalizing
To release the finalizing for the disc, select Undo Finalize at step 3. If appear when pressing STOP button, you cannot cancel finalizing because the finalizing has been in certain progress. When selecting No and press ENTER or RETURN button, finalizing will be continued. You cannot cancel finalizing the DVD-R disc when it has been started. 39

To exit the menu, press TOP MENU button again.
The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. Files whose extension is other than.mp3(MP3) will not be listed in the MP3 menu. Some unplayable folders or tracks may be listed in the MP3 menu due to the recording status. 43
Press K / L buttons to select a desired folder (group) or track, then press ENTER button. When selecting track: Playback will start. When selecting the folder: The files in folder will appear.

Page 44

Playing discs using the disc menu
A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press MENU / LIST button.
Select an item using K / L / { / B buttons, then press ENTER button to confirm. Continue this step to set up all the features you want or to start playing the disc from the menu. MENU / LIST button: Displays a DVD disc menu which varies with the disc and may be the same as the Title menu. K / L / { / B buttons: Moves the cursor around screen. Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). (Press ENTER button after.)
Press MENU / LIST button. The DVD main menu will appear. If the feature is not available, may appear on the TV screen.
Press MENU / LIST button to exit the menu.
Menus vary among discs. Refer to the information accompanying the disc for details. 44

Page 45

Playing discs using the title menu
Some DVDs have a title menu, which lists the titles available on them. It helps you to start play at a specific title.
Select a title to play using the K / L / { / B buttons, then press ENTER button. Play will begin at the title you selected. TOP MENU button: Displays the Title menu of a DVD disc which varies with the disc. K / L / { / B buttons: Moves the cursor around screen. Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). (Press ENTER button after.)

Page 51

Search (contd)

Track search

During play, press SKIP G button to skip the current track and move to the next. The track will move forward one track at a time. To go back to the previous track, press SKIP H button.The track will move backward by one at a time.

1 01:23:45 Audio CD

Select icon using { / B buttons, then press ENTER button. T for track will be highlighted.
Enter a desired track number to search using K / L buttons or number buttons, then press ENTER button. Track search will start.

Time search

Select icon using { / B buttons, then press ENTER button. T for title or track will be highlighted. To move to the clock icon, press B button.
During play, press DISPLAY button. The display menu will appear. Screen for DVD:
Enter a desired time to search using K / L buttons or number buttons, then press ENTER button. Time search will start.
Time search function is available only in the same track or title. 51

Page 52

Repeat/Random/Program playback

Repeat play

3 MNO 6 WXYZ 9 CM SKIP
Chapter: The current chapter will be played repeatedly. (DVD only) All: The current disc will be played repeatedly. (CD, MP3, DVD-RW (VR mode) only) A-B: The A-B point will be played repeatedly. When pressing ENTER button while A-B is highlighted, the starting point (A) will be decided. Press ENTER button again to select the ending point (B). Track: The current track will be played repeatedly. (CD, MP3 only) Group: The current group will be played repeatedly. (MP3 only)
During play, press REPEAT button. Repeat menu will appear. Screen:

OFF Title Chapter A-B

Select a desired option to repeat using K / L buttons, then press ENTER button. The selected repeat play will start. Title: The current title will be played repeatedly. (DVD only)
The A-B Repeat playback can only be set with in the current title (for DVDs), or current track (for Audio CDs). To cancel the repeat playback, select OFF at step 2. You cannot select Group during the random playback of MP3 files.

Random playback

MONITOR

PQRS 7

TUV 8 SPACE 0
With this function, you can play a disc randomly instead of playing in the original order.
Select CD using { / B buttons, then press ENTER button. CD Playback Mode menu will appear.
Press SETUP button to display SETUP/CD menu. SETUP/CD menu will appear. Screen:
Select Random Play using K / L buttons, then press ENTER button. Random play will start.
To cancel random play, press STOP C button twice during random play.

Page 53

Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON Yes No

Page 68

<Delete>:
The chapter marker which you selected will be deleted. <Delete>:

Chapter 2/2

XP 0:01:25 JAN/ 1 1:00AM CH12 Writing to Disc
You cannot delete the first chapter marker of each title.
Select Yes using { / B buttons, then press ENTER button. A chapter marker will be added. <Add>:
Setting pictures for thumbnails
You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing.The beginning picture has been selected as the default.
If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected.

Page 69

Select Yes using { / B buttons, then press ENTER button. A picture for thumbnail will be set.
JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM
Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes No
Select Index Picture Set using K / L buttons, then press ENTER button. Option window will appear.

Page 70

Setting titles to protect
To prevent accidental editing, or erasing the titles, you can protect them from the original menu.

5 Protect OFF ON Select

using K / L buttons, then press ENTER button. Option window will appear.
Select Yes using { / B buttons, then press ENTER button.
7 writing to disc is comAfter
pleted, press SETUP button to exit DISC menu. To protect a whole disc (DVD-RW VR mode Only): Select Disc Protect from Disc menu, then select Yes.

Page 71

Releasing titles from protecting
You are allowed to release the titles protecting feature once protected.

Disc Edit > Original

Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF

JAN/ 1 2:00AM CH12

Select Protect ON OFF using K / L buttons, then press ENTER button. Option window will appear.
Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF Yes XP 0:01:25 No
Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF Yes No
JAN/ 1 2:00AM CH12 Writing to Disc
After writing to disc is completed, press SETUP button to exit DISC menu. 71

Page 72

Editing DVD-RW discs in VR mode (Playlist)
In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not be increased.

Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear.
Disc > Edit > Playlist
Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set
5 Title Delete using K Select
/ L buttons, then press ENTER button. Option window will appear.
Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes JAN/ 1 1:00AM CH12 XP 0:01:25 No
Select PlayList using { / B buttons, then press ENTER button. Playlist will appear.
Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes No
Add New Title Delete Playlist

Page 73

Editing DVD-RW discs in VR mode (Playlist) (contd)
You can delete a specific part of a title. Even when a title is deleted from the playlist, the original title will remain. The disc space to record will not be increased.
Edit Format Finalize Disc Protect OFF ON JAN/ 1 1:00AM CH12
Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete
3 PlayList using { / B Select
buttons, then press ENTER button. Playlist will appear.

Edited 73

Page 74
Part of a title will be deleted.
Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Yes No

.@/: 1 CH

Screen:
You can put names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist.
JAN/1 3:00AM Add New Title Delete Playlist
JAN/1 1:00AM JAN/1 2:00AM
Select Edit using K / L buttons, then press ENTER button. Original/PlayList menu will appear. 74

Page 75

Disc > Edit > Playlist > Edit Title Name
XP 0:01:25 abc Writing to Disc
After writing to disc is completed, press SETUP to exit DISC menu.

Page 76

You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the playlist comes to 999 in total, you cannot add any more chapter markers.

Select a setting using K / L buttons, then press ENTER button. Option window will appear. Proceed to steps A or B.
Settings for Dolby Digital (Default : Stream)
Original OFF PCM ON Dolby Digital PCM Stream OFF Select a setting using K / L buttons, then Note press ENTER button. When playing a DVD-RW Your setting will be activated. disc recorded in VR mode PCM : Convert the Dolby Digital into PCM(2 If the audio source on a disc is channel). Dolby Digital format, set Dolby When your amplifier/decoder is NOT com- Digital to PCM so that you patible with Dolby Digital, set to PCM. can switch to main (L), sub Stream : Outputs a Dolby Digital signals audio (R), or a mix of both (L/R) When your amplifier/decoder is compatible with your amplifier/decoder. with Dolby Digital, set to Stream.

ntrol udio

Settings for PCM (Default : Auto)
Original OFF PCM Auto ON48kHz Dolby Digital 96kHz OFF Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. Auto : Select Auto usually. 48kHz : If your amplifier/decoder is NOT compatible with 96kHz PCM, select 48kHz. 96kHz sound will be output in 48kHz. 96kHz : If your amplifier/decoder is compatible with 96kHz PCM, select 96kHz. 96kHz sound will be output.
When playing disc with copyright protection If you select Auto, the sound will be down sampled at 48kHz. If you select 96kHz, no digital sound will be output. Select Auto, so that outputting 48kHz digital sound.
Dynamic Range Control (Default : ON) Set to ON to compress the range between soft and loud sounds.
TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio ON OFF 4:3 Letter Box All English Original OFF ON OFF
Fast Forward with Audio (Default : OFF) Set to ON to output the sound during play in fast forward of x2.
TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio ON ON OFF OFF 4:3 Letter Box All English Original OFF
Press SETUP button to exit SETUP menu. 89

Page 90

Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material.
Parental lock function may not be available to some discs. With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. Record the password in case you forget it.

Picture noise appears.

TV program reception does not fill the screen.
TV program pictures are distorted.
TV channels cannot be changed. The playback picture or TV program from the equipment connected through the DVD recorder is distorted.

Sound There is no sound.

Sound is noisy.

No DTS sound is output

Page 93

Troubleshooting (contd)

Symptom Playback The disc does not play. Remedy No disc is inserted. A blank disc is inserted. The disc is upside down. Insert the disc with the labeled side facing up. The disc is not correctly inserted. The DVD recorder cannot play certain discs (such as a CDROM) (page 41). The region code on the DVD VIDEO does not match the DVD recorder (page 41). Moisture has condensed inside the DVD recorder. Remove the disc and leave the DVD recorder turned on for about half an hour until the moisture evaporates (page 4). If the disc was recorded on another recorder, the DVD recorder cannot play the disc if it was not finalized (page 39). Resume play was activated (page 46). Press STOP C button twice. You have inserted a disc whose Title menu or DVD menu automatically appears on the TV screen when it is first insert. The DVD VIDEO features an auto playback function. Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. Multilingual tracks are not recorded on the DVD VIDEO, DVD-R or DVD-RW being played. The DVD VIDEO prohibits the changing of the language for the sound track. Try changing the language using the DVD VIDEO's menu. Multilingual subtitle are not recorded on the DVD VIDEO. The DVD VIDEO prohibits changing of the subtitles. Try changing the subtitle using the DVD VIDEO's menu. Multi-angles are not recorded on the DVD VIDEO being played. You are trying to change the angles when icon does not appear on the TV screen (page 56). The DVD VIDEO prohibits changing angles. Try changing the angle using the DVD VIDEO's menu. Set the TV's input to "TV."
The disc does not start playback from the beginning.
The DVD recorder starts playing from the disc automatically. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. The language for the sound track cannot be changed.
The subtitle language cannot be changed or turned off. The angles cannot be changed.
Recording/Timer recording/Editing The channel cannot be changed from the channel you are recording. Recording does not start immediately after you press REC button. Nothing was recorded even though you set the timer setting correctly.
An unused DVD-R or DVD-RW was inserted. It takes a while for the DVD recorder to automatically format a DVD-RW. There was a power failure during recording. The DVD recorder's internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (pages 22-23). Disconnect the AC power cord from the AC outlet, and connect it again. The program contains copy protection signals that restricts copying. The timer setting overlapped with another setting that was set later or has priority. It will take a few seconds for the DVD recorder to input disc data before recording can stop. The timer setting overlapped with another setting that was set later or has priority (page 36). Disc space was not enough.

Recording does not stop immediately after you press STOP C button. Timer recording is not complete or did not start from the beginning.

Page 94

Symptom Remote control The remote does not function. Remedy Batteries are weak. There are obstacles between the remote and the DVD recorder. The remote is far from the DVD recorder. There are no batteries in the remote. Turn on the DVD recorder. The remote is not pointed at the remote sensor on the DVD recorder. When static electricity, etc., causes the DVD recorder to operate abnormally, unplug the DVD recorder and then plug it in again. It may take a few seconds for the disc tray to open after you have recorded or edited a disc. This is because the DVD recorder is adding disc data to the disc.
Others The DVD recorder does not operate properly. The disc tray does not open when you press OPEN/CLOSE A button.
Error message Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Region Error --- Please eject the disc. --Playback is not authorized in your region. Parental Lock On --- Please eject the disc. --The current selected parental level Prohibits playback. Recording Error This program is not allowed to be recorded. Recording Error This program is not recordable in Video mode. Recording Error Can not record on this disc. Recording Error This program is not allowed to be recorded on this disc. Recording Error This disc is protected and not recordable.
Cause Unplayable disc is inserted in the DVD recorder.
Solution Insert the standardized disc which bear the marks on page 41.
Playback is not authorized in the region of the DVD-Video disc which you inserted in the DVD recorder. The current selected parental level in the SETUP Menu prohibits playback.
Insert the DVD-Video disc with region codes 1 or ALL.
Check the "Parental Lock" setting (pages 90-91).
The recording function encountered the copy prohibited program. You are trying to record the copyonce program onto the DVD-RW disc in Video mode. You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. You are trying to record the copyonce program onto the DVD-RW disc which is not compatible with CPRM. You are trying to record on to the protected disc which is set in the Disc Setting Menu.
You cannot record copy prohibited programs. Set "DVD-RW Recording Format" to "VR mode" (page 28).
Insert the recordable disc, and ensure the disc status is satisfied with recording (pages 26-40). Insert the DVD-RW disc (ver.1.1 compatible with CPRM).

Paso 6: Pare la grabacin

Qu son ttulos y captulos?
La grabaciones del disco DVD se dividen generalmente en ttulos. Los ttulos pueden subdividirse en captulos.

Ttulo 1 Ttulo 2

Captulo 1 Captulo 2 Captulo 3 Captulo 1 Captulo 2
Sugerencia 2: Edite el disco grabado
La edicin de discos puede ser muy fcil y el grabador de DVD ofrece convenientes funciones de edicin posibles slo con los discos DVD-R/RW.
Puede editar lo siguiente de la lista de ttulos.
Poniendo nombres en ttulos Seleccionando imgenes para ndices (modo VR) Seleccionando/borrando marcadores de captulos Borrando partes de ttulos (modo VR)

58% Escrit de datos

Original y Playlist (modo VR)
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.
Qu significa "Original" o "Playlist"?
A lo largo de este manual encontrar Original y Playlist que se refieren a las grabaciones reales y la versin editada. La grabacin Original se refiere a la grabacin real en el disco. El Playlist se refiere a la versin editada del disco; cmo se va a reproducir la versin Original.
Esta operacin puede demorar en completarse. 99

Page 100

LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION: PARTS: LABOR:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
LIMITS AND EXCLUSIONS: This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any product not purchased and used in the United States. This product is produced for home use and this warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.

doc1

Editing Changing the SETUP menu
Changing the SETUP menu.83
Tour of the SETUP menu. Settings for Language. Settings for Display. Settings for Audio. Settings for Parental lock level Troubleshooting Language code. Glossary. Specifications.83.84.86.88.90.92.95.96.97

Others

Playing discs.41
Information on DVD play.41 Guide to displays.41 Basic playback.42 Playback.42 Playing discs using the disc menu.44 Playing discs using the title menu.45 Special playback.46 Resume play.46 Fast forward / Fast reverse.46

Others.92

Espaol

Espaol.98

Page 6

Features

This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this DVD recorder.
Recording This DVD recorder is compatible with both DVD-RW, which is rewritable repeatedly, and DVD-R, which is available for recording once.You can choose either one for your convenience. Up to 8 program recording: You can program the DVD recorder to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. One-touch timer recording: You can easily set a recording time as you prefer. Every time the REC button pressed during recording, the recording time will be increased by 30 minutes up to 4 hours.The recording automatically stops when the recording time you set is reached. REC MONITOR: You can confirm the picture quality for recording in the current recording speed which you set. If you want to change the recording speed, press REC SPEED button to set the desired recording mode. Automatic Chapter marker setting: Chapter markers will be put on recordings as you set in SETUP menu before attempting to record. Automatic Title menu making: The DVD recorder makes title menus automatically when finalizing the disc which are recorded in Video mode. Automatic PLAYLIST making (VR mode): A Playlist will be prepared from an Original list, so that you can edit titles in a Playlist as you prefer. An Original list is kept as it is. Play Theater surround sound in your home: When connecting the DVD recorder to an amplifier or a decoder which is compatible with Dolby Digital, you are allowed to experience the theater surround sound from discs with surround sound system. Quick search for what you want to watch: You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter, or time. Start to play from Original and Playlist: Title playing is available from either an Original list or Playlist.
Editing Setting/Clearing chapter markers: You can easily add chapter markers anywhere in your recordings for easy editing. (VR mode) Making your own Playlist: With the original remains as it is, you can edit titles on various Playlist as you prefer. Putting names on titles Setting pictures for thumbnails Setting/clearing chapter markers Deleting parts of titles etc Protecting titles: To avoid editing or erasing titles, the protect function is useful when it is ON in the original list. Compatibility Available for playing discs recorded in Video mode on a regular DVD player (Video mode): Discs recorded in Video mode can be played on regular DVD players, including computer DVD drives compatible with DVD-Video playback*.You will need to finalize the discs recorded in Video mode to play in other DVD players. * DVD-Video Format (Video mode) is a new format for recording on DVD-R/RW discs that was approved by the DVD Forum in 2000. Adoption of this format is optional for manufactures of DVD playback devices, and there are DVD-Video players, DVDROM drives or other DVD playback devices that do not play DVD-R/RW discs recorded in the DVD-Video Format. Others Progressive Scan system Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.

5. 6.

Display message
1. Appears when the DVD recorder is powered on. 2. Appears when the DVD recorder is powered off. 3. Appears when the disc tray is opening.
4. Appears when the disc tray is closing or close. 5. Appears when a disc is loading in the disc tray. 6. Appears when recording data is writing on to the disc.

Page 13

Connection to a TV

Antenna Cable Signal

AUDIO IN VIDEO

Antenna (Back of TV)

Cable Signal

(Back of TV) or

Connect Audio Cable (supplied)
Connect Video Cable (supplied)
Connect RF Cable (supplied)
Disconnect (Back of DVD recorder)

Connect

6 Plug in the AC power cord of the DVD recorder.
Make one of the following connections, depending on the capabilities of your existing equipment.

Method 1

Basic Audio Better picture

Method 2

Best picture

COMPONENT VIDEO IN

AUDIO IN R L S-VIDEO IN

Audio cable (supplied)

S-Video cable (commercially available)
Component Video cables (commercially available)
or S-VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT

Changing the SETUP menu

Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
If your TV is compatible with 525p (480p) progressive scanning and you want to enjoy that high quality picture; You must select the connection Method 2 above and progressive scanning mode.To set the mode, press and hold the SETUP button on the remote control for more than 3 seconds during DVD playback, so that P.SCAN will appear on the display of this unit. If your TV is not compatible with progressive scanning; Use this unit in interlace mode. Make sure that no P.SCAN is on the display of this unit. If not, press and hold the SETUP button on the remote control for more than 3 seconds during DVD playback, so that P.SCAN on the display of this unit will disappear.

PLAY REV

SETUP REPEAT
more than 3 seconds during DVD playback [Interlace mode] [Progressive scanning mode]

Page 14

Connection to a cable box or satellite box
When connecting to a cable box or satellite box with only a few scrambled channels

If you are using a cable box or satellite box with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the following page. With this setup: You can record any unscrambled channel by selecting the channel on the DVD recorder. You cannot record scrambled channels that require a cable box or satellite box.

(Back of TV)

(Cable box or Satellite box)

OUT IN

RF cable
Connect Audio cable (supplied)
Connect Video cable (supplied) RF cable (supplied)

Cable Signal RF cable

Connect (Back of DVD recorder)
When connecting to a cable box or satellite box with many scrambled channels
If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup. With this setup: You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure that the cable box or satellite box is turned on. You cannot record one channel while watching another channel.
Connect Video cable (supplied)
Connect RF cable (supplied) (Cable box or Satellite box)

1 RF cable Connect

(Back of DVD recorder)
Note to the Cable TV System Installer : This reminder is provided to call the Cable TV system installers attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. 14

Page 15

Connection to an Audio System
When you change the connections, all devices should be turned off. Refer to each owners manual for further information on other devices.
Method 1 Stereo system Analog audio input jacks AUDIO

COAXIAL

Method 2 Dolby Digital decoder, MD deck or DAT deck Digital audio input jack
Audio Coaxial Digital cable (commercially available)

DVD Recorder AUDIO OUT

DIGITAL AUDIO OUT Note If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set Dolby Digital to Stream for the Digital Out setting in the SETUP menu. (Refer to pages 88-89.) The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. Unless connected to a Dolby Digital decoder, set Dolby Digital to PCM for the Digital Out setting in the SETUP menu. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to pages 88-89.) Set Dolby Digital to PCM for the Digital Out setting in the SETUP menu for connecting to an MD deck or DAT deck. (Refer to pages 88-89.) By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters.

POWER DISPLAY TIMER PROG. ABC 2 JKL 5 TUV 8 SPACE 0 OPEN/CLOSE
Step 5: Record to DVD discs

POWER DISPLAY

DEF 3 MNO 6 WXYZ 9 CM SKIP CH

.@/: 1 GHI 4 PQRS 7

GHI 4 PQRS 7

REC SPEED CLEAR REC

SP 2:01 Rem.
Hint 1: Play the recorded contents
You can select the title you want to play from a displayed menu, and immediately start to play. Recorded contents are very accessible on a disc, the procedure is simple really as you choose a title on a chapter from the menu Start Rec. Stop/Start Stop Rec. screen.

Step 6: Stop the record

7 REC SPEED CLEAR REC
What is titles and chapters?
The contents of DVD disc are generally divided into some titles.Titles may be further subdivided into chapters.

Title 1 Title 2

8 SPACE CM SKIP
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

PLAY FWD

Hint 2: Edit the recorded disc
You will find editing discs is very easy, and the DVD recorder offers convenient edit functions, which are possible only with DVD-R/RW discs.
You can edit the following from a title list.
Putting names on titles Setting pictures for thumbnails (VR mode) Setting/clearing chapter markers Deleting parts of titles (VR mode)

58% Writing to Disc

Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings. Any Playlist does not take up much disc space.
What Original or Playlist is for?
Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version. Original content refers to whats actually recorded on the disc. Playlist content refers to the edited version of the disc; how the Original content is to be played.
This operation may take a while to be completed. 17

Page 18

Channel setting
All channels are stored in the DVD recorder when purchased. We recommend that you get available channels in your area stored using Auto Preset in the Channel Preset of the SETUP menu.
Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear.

DISPLAY.@/: 1 CH

Press TIMER PROG. button. Timer Programming list will appear.
Check the information on the list you will need.
Press TIMER PROG. button to exit.
Press POWER button to return to the timer standby mode.
To stop the timer recording in process Press STOP C button on the front panel of the main unit. STOP C button on the remote control is not effective.
Press TIMER PROG. button to check the timer programming in process. When the timer recording is proceeding, that program will be highlighted with red. In this case, you cannot select any other program. 35

Page 36

Hints for timer recording
If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. If a disc is not on the tray, the indicator flashes and timer recording cannot be performed. Please insert a recordable disc. When all the timer recording is completed, the indicator flashes.To play or eject the recorded disc, press POWER button first, and then press PLAY B or OPEN/CLOSE A button. indicator is on the front display), any operations on the unit will not be During timer recording or timer standby ( available.To make these operations available, cancel the timer recording or timer standby first ( indicator disappears). To cancel the timer standby mode, press POWER button.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming set previously has priority. A timer recording of lower priority will be canceled, start from the middle, or stop on the way. Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority When the starting time is the same: A program set previously (PROG. 1) has priority.

ex.1 PROG. 1 PROG. 2

When some programming have been made at the end time of the programming currently being recorded: A program set previously (PROG. 2) has priority.
ex. 2 PROG. 1 PROG. 2 PROG. 3

Actual recording

PROG. 1

PROG. 2

When the recording time is partially overlapped: PROG. 1 will start after PROG. 2 is complete to be recorded.
PROG. 1 PROG. 2 Actual recording PROG. 2 PROG. 1
When the recording time is entirely overlapped: PROG. 1 will not be recorded.
PROG. 1 PROG. 2 Actual recording PROG. 2
When the end time of the programming currently being recorded and the starting time of the one to be recorded sequentially are same: The first 20-90 seconds of the programming to be recorded sequentially will be cut off.
PROG. 1 PROG. 2 Actual recording PROG. 1 PROG. 2 The first 20-90 seconds will be cut off.

Page 37

Settings for an external source
Connection to an external source
Connect the external source properly to the DVD recorder by using input jacks either LINE2 (Front) or LINE1 (Rear).

OUTPUT S- VIDEO VIDEO AUDIO L R
Another source (VCR camcorder etc.)
OUTPUT AUDIO R L VIDEO S -VIDEO

S-Video cable

Audio/Video cable

To LINE 2 IN

Front of DVD recorder

To LINE 1 IN

Rear of DVD recorder
1. Press SETUP button to display SETUP/DISC menu. 2. Select SETUP using { / B buttons, then press ENTER button. 3. Select Select Video, then press ENTER button.

Setup > Select Video

L1 (Rear) L2 (Front) Video In Video In

Playing discs Editing

4. Select L2 (Front), then press ENTER button.
L1 (Rear) L2 (Front) Video Video In In S-Video In Video
4. Select L1 (Rear), then press ENTER button.
5. Select the input jack type to connect, then press ENTER button. If you want to use S-VIDEO INPUT, select S-Video In. If you want to use VIDEO INPUT (Composite), select Video In.
L1 (Rear) L2 (Front) Video In S-Video In
L1 (Rear) L2 (Front) S-Video In Video In

Page 38

Settings for an external source (contd)
Recording from an external source
Before recording from an external source, see the instructions for the connection on page 37. 1. Turn the TV and the DVD recorder on, and be sure to select the input of the TV to which the DVD recorder is connected. 2. Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. This operation may take a while to be recognized. 3. Select the input of the DVD recorder which the external equipment is connected. (L2 or L1) To use the input jacks on the back of this unit, select L1 position by pressing [0], [0], [1] on the remote control or the CH L / K buttons. To use the input jacks on the front of this unit, select L2 position by pressing [0], [0], [2] on the remote control or the CH L / K buttons. 4. Select a recording speed using REC SPEED button. Refer to Recording speed on page 26.

XP SEP SP SLP LP EP

5. Press REC button on the DVD recorder to start recording. 6. Press Play button on the external source to record from. 7. Press STOP C button on the DVD recorder to stop recording. This operation may take a while to be completed.

Page 39

Finalizing the discs
You will need to finalize the discs recorded in Video mode to play in other DVD players. Finalizing discs in Video mode automatically creates title menus.
Select Yes using { / B buttons, then press ENTER button. Finalizing will start.
Setup Menu 58% Finalizing
Once you have finalized a disc recorded in Video mode, you cannot edit or record anything else on that disc. A VR mode disc can still be recorded and edited on this recorder even after finalizing. When you insert a DVD-RW disc finalized with this DVD recorder, Undo Finalize will appear instead of Finalize.

Edit Format Undo Finalize
Select DISC using { / B buttons, then press ENTER button. DISC menu will appear. Video mode:
To cancel finalizing, press STOP C button.
Do you want to cancel? Yes No

58% Finalizing

Select Yes, then press ENTER button. Finalizing is cancelled, then the DVD recorder will be in stop mode.
Select Finalize using K / L buttons, then press ENTER button. Option window will appear.

Finalizing is complete.

100% Finalizing
To release the finalizing for the disc, select Undo Finalize at step 3. If appear when pressing STOP button, you cannot cancel finalizing because the finalizing has been in certain progress. When selecting No and press ENTER or RETURN button, finalizing will be continued. You cannot cancel finalizing the DVD-R disc when it has been started. 39

Page 40

Setting a disc to protect
To prevent accidental recording, editing, or erasing the titles, you can protect them from DISC menu.
Select Disc Protect OFF ON using K / L buttons, then press ENTER button. Option window will appear.
Edit Format Finalize Disc Protect OFF Yes ON No
Select Yes using { / B buttons, then press ENTER button. A disc will be protected.

58% Disc

Writing to Disc

Page 41

Information on DVD play
Before you attempt to play DVD discs, read the following information.

Playable discs

This DVD recorder is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the DVD recorder. Other Disc types are not guaranteed to play.

Disc DVD VIDEO Logo

Region codes
This DVD recorder has been designed to play DVD discs with Region One (1). DVDs must be labeled for ALL regions or for Region 1 in order to play on the DVD recorder.You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this DVD recorder.

DVD-RW (VIDEO/VR FORMAT)

DVD-R (VIDEO FORMAT)

CD-DA (AUDIO CD)

The number inside the globe refers to region of the world. Region 1 represents the United States, Canada, Bermuda, the U.S.Virgin Islands, and small regions near Australia. A DVD labeled for a specific region can only play on the DVD recorder with the same region code.

Select an item using K / L / { / B buttons, then press ENTER button to confirm. Continue this step to set up all the features you want or to start playing the disc from the menu. MENU / LIST button: Displays a DVD disc menu which varies with the disc and may be the same as the Title menu. K / L / { / B buttons: Moves the cursor around screen. Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). (Press ENTER button after.)
Press MENU / LIST button. The DVD main menu will appear. If the feature is not available, may appear on the TV screen.
Press MENU / LIST button to exit the menu.
Menus vary among discs. Refer to the information accompanying the disc for details. 44

Page 45

Playing discs using the title menu
Some DVDs have a title menu, which lists the titles available on them. It helps you to start play at a specific title.
Select a title to play using the K / L / { / B buttons, then press ENTER button. Play will begin at the title you selected. TOP MENU button: Displays the Title menu of a DVD disc which varies with the disc. K / L / { / B buttons: Moves the cursor around screen. Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). (Press ENTER button after.)
Press TOP MENU button. The title menu will appear. If the feature is not available, may appear on the TV screen.
Press TOP MENU button to exit the title menu.
The TOP MENU button will not always be active with all DVDs. Menus vary among discs. Refer to the information accompanying the disc for details. 45

Page 46

Special playback

Resume play

DVD-R CD
Press PLAY B button. In a few seconds, play will resume from the point at which it stopped last.You can resume play at the same point even if you turn off the DVD recorder. To cancel the resume play and start playing the disc from the beginning, press STOP C button the second time while the play is stopped.

TIMER PROG.

ABC 2 JKL 5 TUV 8 SPACE 0
You can resume play from where you stopped playing the disc last.
During play, press STOP C button. The resume message will appear. Screen:

Resume ON

For MP3 files, playback will resume from the beginning of the track at which playback was stopped.

Selecting the format of audio and video (contd)
When playing Audio CDs or MP3 files you can switch between stereo, just the left channel or just the right channel.

1 00:00:00 Audio CD

Select icon using { / B buttons, then press ENTER button. Audio menu will appear.
1 00:00:00 L/R L R Audio CD

Switching subtitles

Many DVD Video discs have subtitles in one or more languages the case usually tells you which subtitle languages are available. You can switch subtitle languages anytime during playback.
Select icon using { / B buttons, then press ENTER button. Subtitle menu will appear.

OFF 1 English 2 Japanese

Select a desired subtitle language using K / L buttons, then press ENTER button. Subtitle will be displayed in the selected language. When selecting OFF, subtitle will disappear.
Some discs will only allow you to change the subtitle from the disc menu. Press TOP MENU button or MENU / LIST button to display the disc menu. 55

Page 56

Switching camera angles
Some DVD Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with a angle icon if it contains multi-angle scenes.
Select icon using { / B buttons, then press ENTER button. Angle will switch each time you press ENTER button.
Angle icon appears when a switching camera angle is available.

Reducing block noise

00:00:00 OFF Type 1 Type 2 DVD-Video
Select a desired option using K / L buttons, then press ENTER button. Your setting will be activated. This function reduces noise in the playback picture.When playing back discs recorded in long time mode such as SLP or SEP mode, select "Type 1" or "Type 2". ("Type 2" is more effective.) When playing back discs with a few noises such as DVD-Video discs, select "OFF".
Select icon using { / B buttons, then press ENTER button. NR menu will appear. 56

Page 57

Information on disc editing

Guide to a title list

Title list allows you to check the titles recorded on the disc easily.You can choose a title to play from this screen and easily edit the titles as you prefer.
Disc > Edit > Original
Editing discs with Video mode
You can edit discs with Video mode for the following items. Be sure that once you edit titles, they will not remain as original. Deleting titles (Refer to page 59) Putting names on titles (Refer to pages 60-61) Setting or clearing chapter markers (Refer to page 62)
Once a disc is finalized, editing the disc or recording to the disc will not be available. (Except DVD-RW discs in VR mode.) A playlist is not available with the DVD-R discs and DVD-RW discs in Video mode.

When playing disc with copyright protection If you select Auto, the sound will be down sampled at 48kHz. If you select 96kHz, no digital sound will be output. Select Auto, so that outputting 48kHz digital sound.
Dynamic Range Control (Default : ON) Set to ON to compress the range between soft and loud sounds.
TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio ON OFF 4:3 Letter Box All English Original OFF ON OFF
Fast Forward with Audio (Default : OFF) Set to ON to output the sound during play in fast forward of x2.
TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio ON ON OFF OFF 4:3 Letter Box All English Original OFF
Press SETUP button to exit SETUP menu. 89

Page 90

Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material.
Parental lock function may not be available to some discs. With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. Record the password in case you forget it.
Select Parental Lock using K / L buttons, then press ENTER button.

Page 91

Settings for Parental lock level (contd)
Parental Lock (Default : All) Set the Parental Lock level. Change the parental level using K / L buttons, then press ENTER button. Option window will appear Proceed to steps A or B.
TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio 4:3 Letter Box All 8 All 7 English 6 Original 5 OFF 2 ON 1 OFF

TV Aspect

A password has not been set yet
4:3 Letter Box Change Password? All Yes No 8 All 7 English Disc Menu Language 6 Original Audio Language 5 OFF Subtitle Language Digital Out 2 ON Dynamic Range Control 1 Fast Forward with Audio OFF Parental Lock

TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio
4:3 Letter Password Box All 8All- - 7 English 6 Original 5 OFF 2 ON 1 OFF
Select Yes using s / B buttons, then enter a new password using Number buttons. Your setting will be activated.
If you select No, proceed to Step 5.
A password has been set already
4:3 Letter Box All Password 8 All * 7 *** English 6 Original 5 OFF 2 ON 1 OFF TV Aspect 4:3 Letter Box Change Password? All Yes No 8 Parental Lock All 7 English Disc Menu Language 6 Original Audio Language 5 OFF Subtitle Language Digital Out 2 ON Dynamic Range Control 1 Fast Forward with Audio OFF

Change the password

Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio
Enter the current password using Number buttons.
Press CLEAR button to erase numbers entered incorrectly. When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using Number buttons in option window. Password will be cleared and parental levels will be set to All. 91

Page 92

Troubleshooting
Before requesting service for this DVD recorder, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom Power The power does not turn on. Picture There is no picture. Re-connect the connecting cord securely. The connecting cords are damaged. The Setup Display appears. Press RETURN button to turn off the display. Check the connection to your TV (page 13). Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See page 13. Switch the input selector on your TV (such as to "LINE1") so that the signal from the DVD recorder appears on the TV screen. The disc is dirty or flawed. If the picture output signal from the DVD recorder passes through your VCR to get to your TV, or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience this problem even when you connect the DVD recorder directly to your TV, try connecting the DVD recorder to your TV's S-VIDEO input. Try to set the channels with "Auto Preset" in SETUP menu (page 18). Select a channel of any TV program using the CH o / p buttons. Adjust TV antenna. Adjust the picture (see the TV's instruction manual). Place the DVD recorder and TV farther apart. Place the TV and any bunched antenna cables farther apart. Switch the input to TV. Connect the antenna cable correctly (page 13). If the playback picture output from a DVD player,VCR, or tuner goes through the DVD recorder before reaching your TV, the copy-protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. The disc is dirty or flawed. Re-connect all connections securely. The connecting cord is damaged. Check the connections to the amplifier input. The input source setting on the amplifier is incorrect. The recorder is in pause mode or in Slow-motion Play mode. The recorder is in fast forward or fast reverse mode. If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the Audio Setup settings (pages 88-89). The disc is dirty or flawed. When playing a DTS-CD, noise may come from the speakers. This DVD recorder is not compatible with DTS-CD. This DVD recorder is not compatible with DTS sound. Check that the AC power cord is connected securely. Remedy

Recording does not stop immediately after you press STOP C button. Timer recording is not complete or did not start from the beginning.

Page 94

Symptom Remote control The remote does not function. Remedy Batteries are weak. There are obstacles between the remote and the DVD recorder. The remote is far from the DVD recorder. There are no batteries in the remote. Turn on the DVD recorder. The remote is not pointed at the remote sensor on the DVD recorder. When static electricity, etc., causes the DVD recorder to operate abnormally, unplug the DVD recorder and then plug it in again. It may take a few seconds for the disc tray to open after you have recorded or edited a disc. This is because the DVD recorder is adding disc data to the disc.
Others The DVD recorder does not operate properly. The disc tray does not open when you press OPEN/CLOSE A button.
Error message Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Region Error --- Please eject the disc. --Playback is not authorized in your region. Parental Lock On --- Please eject the disc. --The current selected parental level Prohibits playback. Recording Error This program is not allowed to be recorded. Recording Error This program is not recordable in Video mode. Recording Error Can not record on this disc. Recording Error This program is not allowed to be recorded on this disc. Recording Error This disc is protected and not recordable.
Cause Unplayable disc is inserted in the DVD recorder.
Solution Insert the standardized disc which bear the marks on page 41.
Playback is not authorized in the region of the DVD-Video disc which you inserted in the DVD recorder. The current selected parental level in the SETUP Menu prohibits playback.
Insert the DVD-Video disc with region codes 1 or ALL.
Check the "Parental Lock" setting (pages 90-91).
The recording function encountered the copy prohibited program. You are trying to record the copyonce program onto the DVD-RW disc in Video mode. You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. You are trying to record the copyonce program onto the DVD-RW disc which is not compatible with CPRM. You are trying to record on to the protected disc which is set in the Disc Setting Menu.
You cannot record copy prohibited programs. Set "DVD-RW Recording Format" to "VR mode" (page 28).
Insert the recordable disc, and ensure the disc status is satisfied with recording (pages 26-40). Insert the DVD-RW disc (ver.1.1 compatible with CPRM).
Release the disc protect setting in the Disc Setting menu (page 40).

Page 95

Language code
Language (Afan) Oromo Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Code Language Hindi Hungarian Icelandic Indonesian Interlingua Interlingue Inupiak Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean Kurdish Laothian Latin Latvian; Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Occitan Oriya Panjabi Pashto; Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Code Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 7161 7267

Connections Getting started Recording Playing discs Editing Changing the SETUP menu Others Espaol

Page 96

Glossary
Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high). Chapter Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title. Component video output Each signal of luminance(Y) and component(PB/CB, PR/CR) is independent to output so that you can experience picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i). CPRM (Content Protection for Recordable Media) CPRM is a copy protection system with scramble system regarding the recording of copy-once broadcast programs (e.g. some satellite broadcasts). Digital audio An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a second for CD audio) by an analog-to-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also Sampling frequency and Analog audio. 96 Dolby Digital The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi-channel audio (up to 5.1ch). MP3 (MPEG Audio Layer 3) MP3 is a method of compressing files.You can copy MP3 files on CD-R/RW discs from the computer and play the files on this unit. Finalize To make DVD discs, which have been recorded on, possible to play in DVD players.With this DVD recorder, it is possible to finalize DVD-R/DVD-RW discs. PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CDs and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also Digital audio. Playlist From this list you can play contents of a disc as your desired order or in sequence. Also it is allowed to search a specific scene directly. Regions code Regions associate discs and players with particular areas of the world.This unit will only play discs that have compatible region codes.You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Sampling frequency The rate which sound is measured by a specified interval to turn into digital audio data.The numbers of sampling in one second defines as sampling frequency.The higher the rate, the better the sound quality as possible as it is. SAP (Secondary Audio Program) Sub-audio channel which is delivered separately from main-audio channel.This audio channel is used as an alternate in bilingual broadcasting. S-Video output It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained. Title (DVD only) A collection of chapters on DVD disc. See also chapter. Track Audio CDs use tracks to divide up the content of a disc.The DVD equivalent is called a chapter. See also Chapter.

 

Tags

DSC-P41 KDC-W311AG NV-GS200 Teil 1 Subwar 2050 KD-LX30R VX-120 Myguide 3100 Deskjet 5743 PT-DW6300E ART 406 DA-70815 Powerlite S4 Fusion-2007 Legendc Designer Dvd Recorder Manual Edition Sport V3 16 KX-FPC141 H15 CR-D90 KRP-500M CCD-TRV108 NV-FJ631 3500XI K790I SRU9600 Suite Projector Motorola V171 XE3L-GF ZDF201 L37V01EA 42WS90E3 DP8821 HD5702 Trains Minolta 7235 AV-32X37 PS-50C96HD Sagem D85C Active Update Soccer 4 PFE-900E Impressa F505 WX-C40 32 KW 328 GTB MK-225C HDC-SX5P VDR-D150GC VE 460 Dvd Recorder C24-E RTF 1021 F50-112 KX-FP200 PD-S701 PSR-300-PSR-200 XS-L100p5H Professional 20WGX2 PRO Plus Pink MV1502B Cube R700 WD-J1255C DCR-DVD305E PM645 QC625K 82019 MCD2540E-M ENB39400W8 DMC-FS15 FP730 TW125-2000 319I PH IC-W32A ZHX-313 PDP-507XD P46921 Yamaha D24 XP500 DSC-F505 Lavamat1100 - AEX LC-32SB23U PX-E850HE Riva Plus CT3500 20DMO Basses PMH5000 CPJ-D500 NRL-LS533 Lotus XL3401B 24 Cluster DX-R52 MC-9287UR

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101