$2898A

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal, 16.Overloading-Do not overload wail outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV/VCR through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/VCR. 18.Servicing-Do not attempt to service this TV/VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service-Unplug this TV/VCR from the wall outlet and refer servicing to qualifed service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV/VCR. c. If the TV/VCR has been exposed to rain or water. d. If the TV/VCR does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result !n damage and will often require extensive work by a qualified technician to restore the TV/VCR to its normal operation. e. If the TV/VCR has been dropped or damaged in any way. f. When the TV/VCR exhibits a distinct change in performance-this indicates a need for service. 20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21.Safety Check-Upon completion of any service or repairs to this TV/VCR, ask the service technician to perform routine safety checks to determine that the TV/VCR is in proper operating condition. 22.Heat-This TV/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

PRECAUTIONS

IMPORTANT For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. Install unit in a horizontal position. Avoid locations subject to strong vibration. Do not place the TV/VCR near strong magnetic fields. Avoid moving TV/VCR to locations where temperature differences are extreme. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture, it may damage the tape and TV/VCR. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out. 2) Increase the separation between and receiver. the equipment COPYRIGHT INFORMATION Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.
Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug. If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. Do not put your fingers or objects into the TV/VCR cassette holder. Do not place anything directly on top of the unit.

A TV PROGRAM

GAME MODE.. PICTURE CONTROL. CLOSED CAPTION SYSTEM V-CHIP SET UP.
TROUBLESHOOTING SPECIFICATIONS CABLE CHANNEL WARRANTY

Back Cover

ANOTEABOUTRECYCLING This product's packaging materials are recyclable accordance with your local recycling regulations. and can be reused. Please dispose of any materials bat disposed of in accordance in
Batteries should never be thrown away or incinerated tions concerning chemical wastes.

with your local regula-

FEATURES
Rotary4-headRecord/Playback System-Fourheads ensure excellent picture quality and special effects playback. Index Search-Fast-forwards to start of next recording. Slow Motion-View recorded program at slower than normal speed. Control the playback speed slowness by pressing the EFWD button to go faster, or the REW button to go slower. Infrared remote control Bilingual on screen menu display eelectable in English or Spanish Real time counter-This shows the elapsed recording or playback time in hours, minutes, and seconds. The "J' indication will appear when the tape is rewound further than the tape counter position "0:00:00". 181 channel capability PLL frequency synthesizer tuner with direct station call-(A converter may be necessary to view scrambled cable channels.) Auto Clock Setting-Allows you to set the clock function from a PBS broadcast station. Closed caption system-You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Game mode-Automatically sets external input mode and allows TV/VCR display to be suitable for use with TV games. Auto power on and off system-Automatically toms on the TV/VCR when you insert the cassette, toms off after auto-rewind, and ejects when the beginning of the tape is reached. Auto rewind when the end of a tape is reached-This function doesn't occur when using timer recording. 2 Step picture search operation-You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode. For SP mode only high speed. Three different playback tape speeds : SP/LP/SLP Two different recording tape speeds : SP/SLP Auto Head Cleaner-Automatically cleans video heads as you insert or remove a cassette. Zero Return-The tape returns to counter of 0:00:00 by rewinding or fast forwarding. Still-"Freeze" the picture at any time, for close viewing of a particular scene. Digital Auto Tracking (DTR)-Automatically adjusts the tracking for each tape you play. Rental play mode-lmproves playback picture quality from worn tapes, such as rental tapes. Auto repeat-Allows you to repeat the playing of a tape indefinitely without pressing the PLAY button. Time search-Let you set the TV/VCR to advance the tape by entering the desired playback time you want to skip. OTR (One Touch Recording)-Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button. 1 Year, 8 events (including Daily and Weekly Timer Recording)-The built-in timer allows you to record up to 8 programs at different times on different channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be made once a week up to the end of the tape. Auto return-After timer recording is finished, the TV/VCR can return to the beginning of the recording. Wake up/Sleep timer-Allows you to have the TV/VCR automatically tum on or off at a desired time. Timer Program Extension-Allow you to shift the time schedule for automatic timer recording. V-CHIP-Enables parents to prevent their children from watching inappropriate material on TV. FM mode-Allows you to listen to the FM radio.

2)Pull the cassette out of the cassette compartment. 3)Store the cassette in its case as shown.
Note: You can play back a tape recorded in LP mode (Long Play).

ERA SE PRE VFNTION

You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
If you decide to record on the tape again, cover the hole with plastic tape.

Transparent Tape

OPERATING CONTROLS AND FUNCTIONS
NOTE: We do not recommend the use of universal remote controls. Not all of the functions a universal remote control. may be controlled with
If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control. - TV/VCR FRONT PANEL - [Fig.l]

- REMOTE

CONTROL

- [Fig.2]

1 EARPHONE jack- Connects to earphones (not supplied) for personal listening. The size of jack is 1/8" monaural (3.5mm).

--26 ---25 ---24 --11

2 AUDIO input jack- Connect to the audio output jack of your audio equipment, video camera or another VCR. 3 VIDEO input jack- Connect to the video output jack of your video camera or another VCR. 4 STOP button- Press to stop the tape motion. EJECT button- Press in the Stop mode to remove tape from TV/VCR. (only on the TV/VCR) button Press to select setting modes from the on screen menu. Press to enter digits when setting program. (for example: setting clock or timer program) 5 REW button- Press to rew"ind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search) button Press to select a mode from a particular menu. (for example: LANGUAGE or USER'S SET UP) 6 PLAY button- Press to begin playback. button Press to select menu. setting modes from the on screen

---12 --23

Press to enter digits when setting program. (for example: setting clock or timer program) -8EN

- REAR VIEW - [Fig.3]

HHOH HOHUOOHUOU HO
7 EFWD button- Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) I_ button When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine menu. setting modes from on screen
16 MENU button- Press to display the main menu on the TV screen. 17 DISPLAY button- Display the counter or the current channel number and current time on the TV screen. (See page 16.) 18 SPEED button- Press to choose the desired recording speed:SP/SLP. 19 T-PROG. CLEAR button- Press to cancel a setting of timer program. (See page 28.) COUNTER RESET button- Press to reset counter to 0:00:00. 20 GAME button- Sets the game mode and external input mode at the same time. (See page 17.) 21 SLOW button- Press to start slow motion playback. The slow speed can be controlled by pressing the EFWD button (faster) or the REW button (slower). (only on the remote control). 22 PAUSE/STILL button- Press to temporarily stop the tape during the recording or to view a still picture during playback. Frame Advance function- Press to advance the picture one frame at a time during Still mode. 23 MUTE button- Mutes the sound. Press it again to resume sound. 24 CHANNEL RETURN button- Press to go back to the previously viewed channel. For example, pressing this button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3. 25 TWFM buttonSets the FM mode. (see page 16.) 26 WAKE UP/SLEEP button- Sets the Wake up or Sleep Timer. (See page 29.) 27 Power cord- Connect to a standard AC outlet (120V/60Hz). 28 ANT. terminal- Connect to an antenna or cable system. -9EN

_MENUTIMER PROGRAMMqNG pICTURE CONTROL SETI JNG CLOCK CHANNEL S_ Up USERS SET Up V4;HIP SET UP tJd_JAGE EP_3_.ISH CAPTION [_F] ZERO RETURN TIMES,_RCH INDEX SE_,CH

2 Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR. 3 Select "ENGLISH" or "ESPAI_OL" Select "ENGLISH" or r s.
2 Select "ADD/DELETE CH" Press the PLAY/ or STOP/ ton to point to "ADD/DELETE CH". Press the EFWD/I_ button. butI ADO/DLETECH{TV) _tLrrO pRESET FM ANTENNA lINT!
EFWD/I_ or REW/<I button. "[ ]" _E_,_,J E_,_OL indicate the selected language.the ,UTO_E_ "ESPAIqOL"=Spanish using I _'_'_

CHANNEL SET Up-

4 Begin auto preset
ton to point to "AUTO PRESET". Then press the F.FWD/I_ button. The tuner scans and memorizes all active channels in your area. NOTES: The TV/VCR distinguishes between channels and cable channels.
3 Enter the desired channel number
___ _E,_,_.J _,._ E _. ,_O_E_E_ Press the PLAY/ or STOP/ but- r ton until your desired channel humbet appears. (You can also use the ] number buttons or the CHANNEL [ ,'V button to enter it) (Example: CH8)

08 ADD/DELFrE

standard TV
If you want to play or record a video tape BEFO_ presetting the tuner, you must press the MENU button on the remote control. To preset the tuner again, see "CHANNEL SET UP AGAIN" on page 13. The TV/VCR may recognize TV channels to be CATV channels by the receiving conditions. In this case, try auto preset again in the fine receiving conditions. 5 After scanning The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL or V.
4 Delete (or add) it from (into) memory Press the EFWD,'_ or REW/_II button. The channel number changes to light red. The channel is deleted from memory. To delete another channel, repeat steps [3] and [4].
If you press the EFWD/I_ or REW/'_I button again, the channel is memorized again. Added channel: Light blue. Deleted channel: Light red.
5 Exit the channel setup mode Press the MENU button on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL or button.
Make sure. Press the POWER button to turn on the TV/VCR.
NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/A button to point to "IDIOMA [ESPAIq'OL]", then press the EFWD/)) button, then press the MENU button on the remote control.
1 Select "CHANNEL SET UP"
Press the MENU button on the remote control. Press the PLAY/A or STOP/V button to point to "CHANNEL SET UP". Then, press the EFWD/II) button.

-MENUTIMER pFOGRAMMING pICTURE CONTROL SETTING CLOCK C,H_NNEL SE? UP _SEF;S SET UP V"3HIp SET t_P L_CGUAG {ENGLISH I C,_P]ION IOFF} ZERO RETURN TIME SEA_3H INDEX SEARCH
Select this feature and the TV/VCR's clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure. Press the POWER button to turn on the TV/VCR.
2 Begin auto preset Press the PLAY/A or STOP/V button to point to "AUTO PRESET". Then, press the F.FWD/_ button. The tuner scans and memorizes all the active channels in your area.
Ado i OLETE CH (TV) AO1X_pRESET FM _ITEt,'t4A lINT1

3 After scanning

The tuner stops on the lowest memorized channel.
1 Select "SETTING CLOCK"
Press the MENU button on the remote control. (
Make sure. Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.
Press the PLAY/A or STOP/V button to point to "SETTING

CLOCK"

TIMER PF_OGRAMM_t4G
-ME.O_,_.E _o.,.oL SETTING CLOCK

CF_NNEL SET U_'

osE,.ss_o, V_H_p SET Up LNC_t IAGE [ENttLISH I o,_,_, _o_,_ ZERO RETt,_,I

TIME SEARCH INDEX SEARCH

Then, press the F.FWD/I_- button.
2 Set "D.S.T." (Daylight-Saving Time) to [ON] 1 Select "LANGUAGE"
Press the MENU button on the remote control. Press the PLAY/A or STOP/v ton to point to "LANGUAGE". but_* TIleR PI_ RAMMIk_I pICTURE CONTROL $ETTItCO CLOQ_ (_H,_EL SET UP USERS SET Up LANGU_Et,K_LISHIC_PT_ON {01_3 I \ _MENU_ Z_RO REIIJRN rIME SEARCH _NDEX SEARCH
Pressthe PLAY/A or STOP/V but- f. O_LO_- ) ton to point to "D.S.T.". Then, press the F.FWDII_ or REW/al button until [ON] appears. [ M'_U'_*LO_,,_,]

4 Select the

os ,_OUR
Press the PLAY/at or STOP/V button until your desired day appears. (Example: 1st ---> 01) Then, press the EFWD/I_ button.

P-ol. MIf,_TE

_A. O_K _ET -
When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to resetthe clock.

TO CHANGE

If you want to change the clock, 1)Follow steps [1] and [2]. 5 Select the year Press the PLAY/at or STOP/v f. __,__o_o_but- / _. ,_?_ _i 1 / 2)Select where you want to change using the EFWD/IP" or REW/<I button. 3)Enter correct numbers using the PLAY/at or STOP/_ button. 4)Press the MENU button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the EFWD/I_ or REW/_I button to turn [OFF] this function. Then you can manually adjust the clock.
ton until your desired year appears.. (Example: 2000)EFWD/I_ button. l _-Then, press the

ON SCREEN DISPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed (@tion mode is OFF: When the (losed Caption mode is ON:
Counter mode: After 5 seconds, only the counter remains. To clear it, press the DISPLAY button. *' Clock mode: After 5 seconds, only the clock and the channel number remain. To clear them, press the DISPLAY button. OFF mode Counter mode Clock mode
The On Screen Display disappear

after 5 seconds.

This is true even if the MUTE button is pressed, or the PAUSE/STILL button is pressed while recording. OFF mode Clock/Counter mode

remains Counter

, remains Clock & Channel

SPECIAL

TO C4 NCEL "1"11L"t,'M MODE Press the TV/FM button on the remote control to exit the FM mode.
This function enables you to receive the FM radio wave broadcasting.
1 Set the FM mode Press the TV/FM button on the remote control. The radio frequency appears on the TV screen.

/ / [ /

FM 880
Magnetism from nearby appliances color of the TV picture.

might affect the

If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.
2 Select the radio frequency you want to receive
Press the CHANNEL or button until your desired radio frequency appears. NOTES: The radio frequency and disappear. indication repeats to appear This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The "-" indication will appear when the tape has rewound further than "0:00:00" on the tape counter.

WHEN IS ON

CAPTION

The On-Screen onds.

Display will disappear after 5 sec-
This is also true when the MUTE button is pressed, and when the PAUSE/STILL button is pressed while recording. If there is a power failure of any kind, the unit will retain its memory for this feature.

- 18 -

Selection TV-Y V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets the limitations you select. In this case, "PROTECTED PROGRAM by." message appears on the TV screen. To block ratings, follow the steps below. Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). TV-Y7 TV-G TV-PG TV-14 TV-MA

Rating Category

Explanations
Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested. Unsuitable for children under 14 Mature audience only
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the EFWD/I_ button, the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to BLOCK]. To set the sub-ratings below. individually, follow the steps

TV RATING

Make sure.
1 Select "V-CHIP SET UP"
Press the MENU button on the remote control. Press the PLAY/* or STOP/V button to point to "V-CHIP SET UP". Then, press the F.FWD/I_ button.

_,NNEL

Vq_HIP SET
ME_U,,_0,__o._oL 8_TING CLOCK

TIMER PR_RAMMING

u_,_s_Tu, t_XlGUAG E ENGLISH] _,o'*_",E,o,_td_

SET UP

When you select [TV-Y7]: Press the STOP/V or PLAY/A button to select "FV" (Fantasy Violence). Then, press the EFWD/I_- button to select [BLOCK] or [VIEW].

Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.

7D CANCEL

RENT>tL
Repeat steps [1] and [2], select [OFF] using the EFWD,'I_ or REW/<I button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature.

1"0 CA,VCEL

REI'EAT

PLA Y MODE

Repeat steps [I] and [2], select [OFF] using the EFWDhI_ or REW/<I button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature.

- 22 -

SEARCH
Make sure. TV/VCR power must be turned on. Insert a tape. This function This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. will not operate in recording mode.
This function is not operative when a cassette tape is not inserted in the TV/VCR. In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

11nsertatape,

2 Select "TIME SEARCH" mode
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Press the COUNTER RESET button repeatedly.

remote control,

r,_,_,c,_,_.,.,,_.o_
SEarING CI__ PA4hqNE L _i_" Up
Press the PLAY/A or STOP/T but_.'_o_ UP V-CHIP SET ton to point to "TIME Press the MENU buttonSEARCH". on the I" _*,,,_,_'_'_'_ -_ ZEI_ REIURN Then, press the F.FWD/II_ button.

_NDEX '_'_"SEARCA_

3 Begin recording or playback Press the RECORD or PLAY button.
Press the STOP button when recording completed.
4 To activate "ZERO RETURN"
3 Enter your desired time
or playback is Press the PLAY/& or STOP/_ but- l,, ton until your desired time appears. _ %:_?_ (Example: "2:50' stands for 2 hours / 50 minutes) / If you wish to cancel the Time [ Search at this point, press the MENU button on the remote control. ]
Press the MENU button on the remote control. Press the PLAY/A or STOP/v button to point to "ZERO RETURN".

-._.uP,croRE _o.rR_ SE'rClNG CLOCK

TIMER pRO_ RAMMI_IG

_RSSET_P V_lP SET UP tJ_IGUAGE ENGLISH) _T_ td_

_o RETURN

4 Begin Time Search
By pressing the REW/_I or EFWD/I_ button, the TV/VCR will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. 7D poittt Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time. CANCEL THE TIME SEARCH at this
Then, press the EFWD/I_ button. _ The counter will appear on the TV screen. The tape will automatically returns to 0:00:00.

stop when the counter

The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. NOTES: Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR. The index mark will not be recorded if the PAUSE/STILL button is pressed and released during recording. The time gap between making the index marks on the tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording. Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs.
CURRENT Beginning of tape I Pro.11 Pro.2 I Pro.3 m rINDEX MARK 1 PLAYBACK ! PROGRAM End of tape Pro.5 ] Pro.6 I Pro.7 I 2 3
3 Begin Index Search Press the REW or F.FWD button. The TV/VCR begins rewinding or fast forwarding of desired program. to the beginning
NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one.
4 After Index Search When the preset program is reached, the TV/VCR I will start playback automatically. I '_ A video cassette must be inserted in the TV/VCR for this function to work. The number of Index Searches can be set up to 20. This function will not operate in the recording mode. When you want to cancel the Index Search while in progress, press the STOP button.
1 Select "INDEX SEARCH"

Connect your TV/VCR and a Source (Playing) VCR using the following diagram. lira__ [Fig.8]

[The TVNCR]

[Ex: Source (playing) VCR or camcorder]
Press the number buttons on the remote control or the CHANNEL or button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
adapter cable (not supplied)

k _o @

1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette, or one you want to record over, into the TV/VCR's cassette compartment. 3)Press the SPEED button on remote control for the TV/VCR (SP/SLP). 4)Press the TV/VCR 5)Press the to select the desired recording speed CHANNEL or button on the until "AUX" appears on the screen. RECORD button on the TV/VCR.
2 Select the tape speed Press the SPEED button to select the desired tape

speed (SP/SLP).

3 Begin OTR Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be determined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours. - 26
6)Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during dubbing, use the TV/VCR's front panel controls whenever possible. The remote control might affect the source (Playing) VCR's playback operation. EN
And press the F.FWD/I_ button. I"
TIMER P_RAMMkNG PIGTURE CONTROL CHANNEL SET UP

-M_.U-

You may set the TV/VCR to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: SETTING TIME: July 6th, 2000 from 7:30PM to 8:50PM CH61 SP
If you have not yet set the clock, / s. "MANUAL CLOCK SET' LANGUAGE [ENGLISHI appears, If so, follow stops [3] t o !. toga _._._. TFMESEARCH [8] on page 15. Then set the timer L. recording.
2 Select your desired program position (1-8)
Press the PLAY/A or STOPiV button to select the desired program position. Then, press the F.FWD_ button. _ _ _, 6,o
CHANNEL: TAPE SPEED: Make sure.
If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. Clock must be set to the correct time and date before setting the timer. TV/VCR power must be turn on to program it. Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) The channel you want to record is properly set in advance. (See page 13.) Avoid over lap of programs. There is a chance that a program will not be recorded. when programs overlap; The program with an earlier start has priority. Once the earliest program finishes, the overlapping programs will begin recording in sequence The illustration below demonstrates the sequence of recordings Program 1 10:00AM - II:00AM Program 2 9:00AM - 10:00AM Program 3 9:30AM - 12:00PM

My captions are scrambled with white boxes on the TV screen. My program guide listed a TV show as being closed captioned but none of the captions were displayed. My prerecorded video tape does not show any captions. The tape box mentions it being closed captioned. My TV screen shows a black box on certain channels.

[OFF].

- 31 -

SPECIFICATIONS

GENERA

L SPECIFICATIONS'

CTRICAL

IF I(A

13 inch in-line gun, 90 deflection tube NTSC-M Television system : Closed caption system :I5.I19/FCC Video Heads : Rotary four-head 1/2 inch Tape width : Tape speed SP: 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2-#6 #7-#13 TV VHF High : TV UHF : # 14~#69 CATV VHF : 5A MID band : A5-A 1, A-I SUPER band : J~W HYPER band : W+ 1-W+84 FM : 88~108MHz Terminals VHF/UHF 75 ohms Antenna input : unbalanced RCA connector 1 Video input : RCA connector 1 Audio input : Earphone : 1/8" monaural (3.5 mm)
Video input level : Audio input level : Video S/N ratio : Audio S/N ratio :
0.5-2.0Vp-p -15dBs More than 46dB More than 43dB

SPE(It

ICATIONS
AC 120V/60Hz 65W H: 15-3/4" (400mm) W: 15-3/16" (386mm) D:14-13/16" (377mm) 24.3 lbs (I lkg)
Power requirement : Power consumption : Dimensions :
Weight : Designs without If there default
and specifications are subject to change notice and without our legal obligation. is a discrepancy between languages, the language will be English.
CABLE CHANNEL DESIGNATIONS
If you subscribe to cable TV, the channels are displayed as I-125. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations.

CAD/channel 5A

D 17 S 32

E 18 T 33

F 19 U 34

G 20 V 35

H 21 W 36

I 22 W+I 37

J 23 W+2 38

K 24 W+3 39

L 25 W+4 40

M 26 W+5 41

N 27 W+6 42

W+7 43

A 14 P 29 W+8 44

B 15 Q 30 W+9 45

TMDisplay
CATV channel C "IVDisplay 16
CATVchannel R TVDisplay 31
CAD/channel W+10 W+11 W+12 W+13 W+14 W+15 W+16' W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24 TVDisplay 60
CA'rVchannel!W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 !W+36 W+37 W+38 W+39

D/Display

CAD/channel W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 _W+51 W+52 W+53 W+54 D/Display 80 A-81 A-82 A-83 A-84 A-89 90
CAD/channel W+55 W+56 W+57 W+58 D/Display 93 94

W+59 W+60 W+61 W+62 W+63 W+105
CAD/channel W+65 W+66 W+671W+68 D/Display
W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+119 120
CAD/channel W+80 W+81 W+82 W+83 W+84 D/Display 125 - 32 EN 9J27

LIMITED

EUNAI lows: CORP. will repair this SYLVANIA product, free of charge

WARRANTY

in the USA in the event of defect in materials or workmanship as fol-

DURATION:

PARTS: LABOR:
FUNAI CORE will provide parts to replace defective parts without charge for one (I) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.
FUNAI CORE purchase. will provide the labor without charge for a period of ninety (90) days from the date of original retail

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warcanty.
This warranty shall not be extended to any other person or transferee. are altered, replaced, defaced, missing or if service was Limited warranty does not apply to any product not pur-
This warranty is void and of no effect if any serial numbers on the product attempted by an unauthorized service center. This FUNAI CORPORATION chased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORE, or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire. flood, lightning or other acts of GOd.
THIS WARRANTY DOES NOT COSMETIC PARTS, COMPLETE COVER PACKING MATERIALS, ANY ACCESSORIES ASSEMBLY PARTS, DEMO OR FLOOR MODELS. (EXCEPT REMOTE CONTROL), ANY
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES. EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY iS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.