SYLVANIA

27 INCH COLOR TELEVISION

SRT2227S

FEATURES
Tinted, Bright Black Matrix Picture Tube 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels. PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides flee and easy channel selection, and lets you tune directly to any channel using the channel number buttons (0-,-9 and +100-key) on the x_mot control. On-Screen Function Display. Full-Function Remote Control Sleep Timer Closed Caption DecoderYou may view specially labeled (cc) "IV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Auto Shut Off FunctionIf there is no air signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

PRECAUTIONS

Place your TV in a room with Keep your TV set away from Do not place your TV on soft Leave enough room for air to adequate ventilation. sources of direct heat, such as heat registers or direct sunlight. surfaces, such as rugs or blankets. circulate around the bottom, top and back of the set.
The serial number of this product may be found on the back of the T_. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanem Date of Purchase Dealer Purchase from Dealer Address This Owner's Manual : record of your purchase to aid identification Dealer Phone No. Model No. Serial No. of recycled paper. in case of theft.

is made

ANTENNA/CABLE

CONNECTIONS

UHF/VHF Rod CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
VHF At_teava (NcX st_pplied)
*Some cable TV systems we scrambled signals and tequi_ a special converter to receive tbes4: channels. Cor_ult your local cable company.
CATV Box * or Satellite Box (lqo_ supplied)
UHF Antenna (Not supplied)
75-ohm Cmxial Cable VHF/UHF Combiner (Not supplied)
From Cable Syslem or Satellite Antenna 75-ohm Coaxial Cable
VHF!UHF CombinationAntenna _ (Not _uppli_ll

CLOSED

This TV can receive lIFtlt||l:l] tl| [_ r

CAPTION

CI and C2 Caption and Text.

Note_l:

(I) Closed Caption Characters can be displayed on the TV screen only wben the received b_edcast sig_,al contains Caption Signals. (2) Paint-on mode: Displays input charactcxs on the screen immediately. Pop-on mode: Once characters are shred in memo_, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines) Note: If CAPTION C 1 or C2 is scleeted but a Closed Caption signal is not included, characters will not be displayed. IIIlk_ _ Iff'fi:
(I) Whe_ your TV receives a spe_tal effecte playix,tck signal (i.e., Search, Slow, Still) flora a VCR's ,Adeo output channel (CH3 or CH4), your TV may not display the cor,'ect caption or text. (2) Captions and texts may not match die TV voice cxactiy. (3) interference may cause the closed caption system not to function p_pefly. (4)The caption or text characters will not be displayed while the menu display or functions dis* play is shown. (5)If yea see this screen:
(I) lYtspthysdie text on die screen by scrolling (max. 7 lines) (2) If the received broadcastslgnal does not contain caption or text sig_ais, no change will occur. If your "IVdisplays a blackbox on die screen, this means thatyour TV is set to TEXT mode. To clearscreen, select CAFT[ON CI, C2 or CAPTION [OFF].

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC ANCE TO RAIN OR MOISTURE.

CAUTION

FIGURE A

SHOCK,

DO NOT EXPOSE

THIS APPLI-

EXAMPLE

OF ANTENNA

GROUNDING CODE

AS PER

ANTENNA LEAD WIRE IN

NATIONAL

ELECTRICAL

SYMBOL

INDICATES
GEROUS RISK SENT CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS THERE AND THE The important note is located on the rear of the cabinet. IN THE SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

VOLTAGE THIS

CONSTITUTING SHOCK UNIT. THAT OPERATING INSTRUCTIONS ACCOMPANYING IS PRE-
OF ELECTRIC WITHIN SYMBOL ARE

INDICATES IMPORTANT

DISCHARGE (NEC SECTION

UNiT 810-20)

MAINTENANCE LITERATURE APPLIANCE.
ELECTRIC SERVICE GROUNDING (NEC SECTION CONDUCTORS 810_21)

IMPORTANT

SAFEGUARDS
AMEUBLES- Cet appareil ne doit atre plac6 que sur un meuble (avec ou sans roulettes) recommand6 par le fabricant. Si vous l'installez sur un meuble it roulettes, d6pl acez SYMSOLE SSEMENT LESCOMPOSaNVaS D'AVERT POOR _'P_a_L ETMEUBLE AaOOLETTES les deux ensembles avec pr6caution. Un arrat brusque, l'utilisation d'une force excessive et des surfaces irr6gulibres risquent de d6stabiliser l'ensemble et de le renverser. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

- NATIONAL

SERVICE ELECTRODE

GROUNDING

SYSTEM 250, PART H)

$2898A

1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recomPORTAaE_CART WARNING mended by the manufacturer. An __ appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance-this indicates a need for service. 20. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

OPERATING

- FRONT PANEL -

CONTROLS

AND FUNCTIONS

- REAR PANEL -

jackTo connect listening. to the video or VCR. jacks over on those earphone

- REMOTE CONTROL -

1. HEADPHONE (not 2. supplied) VIDEO output NOTE: the front
7. CHANNEL memorized NOTE:You

buttons-

Press to select channels button.

for personal Connect

(in) jackjack

channel. MUST PRESET

13.DISPLAY button- Press to display the channel number on the screen. If you press it again, the channel number will disappear. 14. SLEEP button- Press the SLEEP button to display the sleep timer and start the function. The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30,.90, 0 minutes) 15.GAME button- Press to set the Game mode and external input mode at the same time. Press the GAME button again to exit this mode. 16.ANT(enna). IN jack- Connect to an antenna, cable system, or satellite system. 17.AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Unwrap the AC cord completely from the backcover before plugging the cord into an AC outlet.

15 --14 --13

of a video

camera and priority that

The AUDIO panel
BEFORE using CHANNEL / (See CHANNEL PRESETTING)
are given Suppose made too,
on the rear panel. tions are already and In this case ones

the connec-

Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode. 8. POWER (PWR) button- Press to turn the TV ON and OFF. 9. Infrared Sensor Window- Receives the infrared control signals from the remote control unit. 10.CHANNEL NUMBER button- Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 button- Press to select cable channels higher than 99. 11. MUTE buttonPress the MUTE button to

with with

the rear-panel the front-panel via the
jacks jacks. front channel

additionally

the input
is automatically L (in) jackoutput jack
selected. to the left camera of a video

AUDIO or VCR. NOTE:

Connect

rear-panel input. The

AUDIO sound
L (IN) jack is heard from

is for mono (NN)

both audio 4.

speakers. equipment

Use this jack to be hooked Connect jack
for monaural up. to the right camera

AUDIO channel or VCR.

R (in) jackaudio output

II_gt iLllll_[flll

II: I I fiat11 UN N I QI_I

cover back

MENU buttonPress on the TV screen. VOLUME the volume Press menu A/ level.

to display Press

the menu to control
turn offthe sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press the MUTE button again or press the VOL(ume) or button to restore sound. 12.CHANNEL RETURN button- Press this button to go back to the previously viewed channel. For example, pressing the CHANNEL RETURN button once will change channel display from CH 3 (present channel) to CH 10 (previously viewed channel), and pressing it a second time will return from CH 10 to CH 3.

1) Slide the battery compartment on the remote unit. 2) Insert 2 "AA" penlight in the batteries direction

battery

to determine

the setting (only

compartment by the polarity installed 3) Replace with
as indicated Batteries may dam-

on the TV screen.

the VOL
(+ / -) markings. incorrect unit. polarity

button)

Press menu. Channel Picture to select or adjust from a paxticulax Selection, Selection, (for example: Presetting, Adjustment, Language Closed V-CHIP

age the remote

the cover.

Caption Set Up)

PREPARATION

FOR USE

[ADD/DELETE FUNCTION] so that the menu display appears on the TV or button to point to "CHANNEL button.
AUTO MEMO [ON] PICTURE CHANNEL SET
If you want to change the language dure below.

of the on-screen

menu, follow the proce PICTURE CHANNEL SET

1) Press the MENU button

screen.
[ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF]

2) Press the CH(annel)

SET".
1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) 5) Select "ENGLISH" or button or "ESPAIqOL" to point to "[ENGLISH]". = Spanish by using

Then, press the VOL(ume)

3) Press the VOL(ume) button so that "ADD/DELETE" is selected. 4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal 10 seconds.

STEREO DD/DELETE

PICTURE CHANNEL

screen automatically

in about
[ENGLISH]ESPANOL V-CHIP CAPTION SET UP
the VOL(ume) or button. 6) Press the MENU button to exit the menu.
Perform "ADD/DELETE" function while this display appears on the screen. Press the VOL(ume) or button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. Press the VOL(ume) or button to light up the channel number in LIGHT RED if you wish to erase the channel 5) Press the MENU button to exit the menu. _III_I]_[I]I _ g'l][']l I IIiVi I

PICTURE CHANNEL SET [ENGLISH]ESPAtqOL V-CHIP SET UP CAPTION [OFF]

from memory.

NOTE:You MUST PRESET channels BEFORE using CHANNEL or button. To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears on the TV screen, 3) Press the CH(annel) or button to point to "CHANNEL Then, press the VOL(ume) 4) Press the CH(annel) button. to point to "AUTO MEMO". ADD/DELETE AUTO MEMO

STEREO [ON]

PICTURESET This function is suppresses noise, restores the dynamic range and electroni[ENGLISH]ESPANOL cally expends the stereo signal to create a more specious sound effect. V-CHIP ETUP S 1) Press the MENU button so that the menu display appears on the TV CAPTION [OFF]

CHANNEL

or button
Then, press the VOL(ume) button. The tuner scans and memorizes all active channels The TV distinguishes channels. When AUTO MEMO
2) Press the CH(annel) or button to point to "CHANNEL Then, press the VOL(ume) button. 3) Press the CH(annel) or button so that "STEREO"
in your area. and cable (CATV) channel

is selected.

between

standard

TV channels
4) Press the VOL(ume) or button to select the stereo mode on or off. Stereo sound is effective when the "STEREO" is on. reappears on the
[ENGLISH]ESPAI_IOL V-CHIP SET UP CAPTION [OFF]

action is completed, or

the lowest memorized
When you press the CH(annel)
button after selecting only.
the tuner will stop at the memorized

channels

The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.

AUTO MEMO AUTO

STEREO
If the power fails or is disconnected ly when the power resumes.

while the TV is powered

on, the TV will turn on automatical-

OPERATIONS

GAME MODE Set to the most suitable position for TV GAME. [+]:ON [-] :OFF BRIGHT Adjust until the whitest parts of the picture are as bright as you prefer. [+] : increase brightness [-] : decrease brightness CONTRAST Adjust to increase or decrease contrast. [+] : increase contrast [-] : decrease contrast COLOR Adjust to be brilliant or pale color. [+] : be brilliant color [-] : be pale color TINT Adjust to obtain natural skin tones. [+] : greenish tone [-] : reddish tone Notes: "+" is achieved by pressing the VOL(ume) button and "-" by pressing the VOL(ume) button. In the above steps, the picture adjustment display will disappear from the TV screen : Press the CH(annel) You may view specially labeled (cc) TV pro1) Press the MENU button so that the menu grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. display appears on the TV screen. 2) Press the CH(annel) or button to point to "CAPTION". 3) Press the VOL(ume) or button to select the mode you wish. 4) When done, press the MENU button to exit the menu. or button. automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) button so that "PICTURE" is selected. Then, press the CH(annel) or button repeatedly until the display returns to the screen. If you adjust the other Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. [USING THE GAME BUTTON] You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. "GAME" appears on the TV screen. To exit the Game mode and external input mode, press the GAME button on the remote control again. To cancel the Game mode only, adjust the picture control. In this case, "VIDEO" instead of"GAME" appears on the TV screen. If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode automatically.

1) Press the POWER button to turn on the TV. 2) Select the desired channel with the CH(annel) 3) Adjust 4) Adjust the volume to the desired listening for a natural picture controls looking
button. or button. ADJUSTMENT".)
level using the VOL(ume) image. (See "PICTURE
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period. 1) Press the POWER button to turn on the TV and press the SLEEP button on the remote control. 2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP10 To cancel the sleep timer: Press the SLEEP button repeatedly until "SLEEP 0" is displayed.
SLEEP button on remote control.) Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

[II_O_!I!]

E 'llJ_I_lli[O]_l__O_
oE_j IDDDDDDDnDDDDDDD/ LDDDDDDDnDDnD_ _n_

BRIGHT

1-[ /-I-[
[-] CONTRAST [+] [-] COLOR [+]

: Press the VOL(ume)

button.

*I1[1111_g1$li liP,1

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets the limitations you select. In this case, "PROTECTED PROGRAM by." message appears on the TV screen. You can watch the protected program by entering access code To block certain ratings, below. follow the steps
ICt" /ICZ" /rOT" 1rCZ" /CZ"
CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL SET [ENGLISH]ESPA_OL _ [ENGLISH]ESPA_OL _ [ENGLISH]ESPANOL _ [ENGLISH]ESPANOL _ [ENGLISH]ESPANOL

V-OHiPSETUP

V-OH,PSETUP

V-CHIPSET UP

'Iil[IlLI '_
r_l!]Ill_,?ll II] I Ni_i i
1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the VOL(ume) button so that "PICTURE" is selected. 3) Select the feature you wish to adjust with the CH(annel) VOL(ume) or button. or button and adjust it with the
Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). You cannot access the menu when the "PROTECTED PROGRAM by." message appears. In this case, change to the unblocked chaamel, then press the MENU button.

[MPAA RATING SET UP]

(Continued)
[TV RATING SET UP] When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) button, the sub-ratings will appear on the TV screen. If you select the rating category (example: TVPG) and turn it [BLOCK] or [VIEW], the subratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below. When you select [TV-Y7]: Press the CH(annel) or Violence). Then, press the VOL(ume) button to select [BLOCK] or [VIEW]. When you select [TVMA]:

VOL(ume)

button to continue. ACCESS CODE
1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) "V-CHIP SET UP". or button to point Then, press the VOL(ume) button. 3) Use the number buttons access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000. 4) Press the CH(annel) to "MPAA RATING". Then, press the VOL(ume) button. 5) Press the CH(annel) or button to point to I,- pG G

/ PG-13

1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) (
CHANNEL SET ESPA_IOL UP [ENGLISH] V-CHIP SET
2) Press the number buttons to enter your old access code. If you have never set up your personal access code, use 0000. 3) Press the CH(annel) or button to select CHANGE VOL(ume) continue. CODE. button to Then, press the
PICTURE [ENGLISH] ESPAiqOL CHANNEL SET

V-CHIP SET UP

"V-CHIP SET UP".
CAPTION [OFF] to enter 4-digit ACCESS CODE
Then, button the point to [ P"CAPTION [OFF[ press to or P_CTURE VOL(ume) button. 3) Use the number buttons to enter 4-digit access code. The default access code is ACCESS CODE 0000. If you have not set up your personal access code, you should use 0000. 4) Press the CH(annel) I TVRATING or button to point to P"MPAAATING R Then, RATING". the "TV press VOL(ume) button.

TVRATING

MPAA RATING

. CHANGE CODE

button to point
TV RATING I_ MPAA RATING CHANGE CODE

FV''t'Y I I

TV-Y7 [BLOCKI P,FV [BLOCKI

TV-PG [BLOCKI

button to select
4) Use the number buttons to enter your desired access code in the NEW CODE space. Then, enter the same code in the CONFIRM
NEW CODE F-----------] CONFIRM CODE

CHANGE

your desired item. Then, press the VOL(ume) button to select [BLOCK] [VIEW]. or

[VlEWl [VIEW]

[VIEW l [VIEW]
5) Press the CH(annel) ( or button to point to / p"TV-Y7(TV'Y ) [VIEwI[VIEW l your desired

item.Then, press the

PG],[TV-14] [TVor "D" (Suggestive
Dialog), "L"(Coarse
Press the CH(annel) or button to select

[BLOCK] [BLOCKI [BLOCK]

[BLOCK]
CODE space. Your new access code is set. You will return to the "V-CHIP SET UP". If the code in the CONFIRM CODE space does not match the code in the NEW CODE space, repeat step 4, making sure you enter the same new code exactly in the CONFIRM CODE space. NOTES: If a power failure occurs, the default code, 0000, will be the active access code again. If you connect the power cord to an AC outlet that is controlled by a wall switch, your personal access code will be erased every time you turn off the power at the wall switch. The default code will be the active code again. [IF YOU FORGET YOUR ACCESS CODE] You should restore the access code to default code, 0000. To restore 0000 as your personal access code, unplug the TV's power cord for 10 seconds, then plug it in again.

TV-G TV-14(TV'PG( ))

[VlEWI

[VlEwl[VIEW l

xNC'17

[VIEW] [VIEW]

button to L TV-MA( ) [VIEW l or [VIEW].

<Rating Category

select [BLOCK]
<Selection> Explanations> TV-Y: TV-Y7: TV-G: TV-PG: TV- 14: TV-MA:
<Selection> <Rating Category Explanations> G: General Audience PG: Parental Guidance suggested. PG- 13: Unsuitable for children under 13 R: Restricted; under 17 requires accompany ing parent or adult guardian NC-17: No one under 17 admitted X: Mature audience only
Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested. Unsuitable for children under 14 Mature audience only
Situation), or "V" I TV-Y7( )[VIEW] / (Violence). Then, press TV-G [BLOCK]| the VOL(ume) butTV-PG (DLSV)[BLOCK]| Language), "S"(Sexual [i, TV.Y (DLSV)[BLOCK]| ] [VIEW] ton to select [BLOCK] TV-14 TV-MA ( LSV)[BLOCKlJ or [VIEW]. Note: When you select [TV-MA], "D" does not appear on the TV screen. The sub-ratings which set to [BLOCK] appear next to the rating category in the TV RATING menu. 6) Press the MENU button to exit the menu.
When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically. When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically. 6) Press the MENU button to exit the menu.

When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or [VIEW] automatically. When you turn "TV-MA" to [VIEW], then n all ratings will turn to [VIEW] automatically.

To change

the access code, follow these steps. i/ CHANNEL SET PICTURE
1) Press the MENU button, then press the
CH(annel) or but-| I_ V-CHIP SET UPESPA_IOL [ENGLISHI ton to select V-CHIP | CAPTION [OFF[ SET UP. Press the 1,

TROUBLESHOOTING

Sometimes a performance looked possibilities. Before arranging

apparent but often over-

MAINTENANCE

'[tUL[IJII[_I

Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.
problem can be easily solved by checking seemingly
for service, check these items. It could save you time and money.

IJI]IM EllII II_1_1 I_[_

Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord.

SERVICE

"" 9 =

POSSIBLE

REMEDY

SUPPLIED

XXXXXXXXXXX X X X X X XX X X X X X X Possible Remedy You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions. Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue. Interference caused by building, power lines, thunderstorms, may cause scrambled or incomplete captions to appear. etc. X

ACCESSORIES

Owner's Manual
Try a new channel, if OK, then possible station trouble. Is TV plugged in? Power at outlet? Is TV's POWER button on? Is antenna connected to terminal on the back of the set? If outside antenna is being used, check for broken wire. Check for local interference. Turn off with POWER button and then turn it on after about a minute. Adjust COLOR control. Adjust CONTRAST & BRIGHTcontrol. Check batteries in Remote Control. Closed Caption Problem My TV is showing misspelled, captions that are

1-800-4-MY-HOME

.SM Aaytime,-:day r night o

" ". ".

(_400-4ss.4s_)

.w_%v,_earli.cofll

_:_ i,;_
TO ,.,,_'_n" _.w._.,."r such as vacuums, in "_''_
lawn equipment and etecbonics for repair;call for the location of your nearest Sears Parts & Repair Center.

t 800-488-1222

" ".
AayUme,dayor nlgm. M/ww,sears,ortl
For the replacement parts, accessories and owner's manuals. that you need.to do-it-yours_lf, call Sears PartsDIrect =" !

'=_ _,_.

1-800-366-PART

1t.800.366.72781

6&m.- 11 p.m.CST,. :.7.day= a _.
, ;, _:_ i;_ _ _'_ ;,._ _:
To purchase or inqu!re about a Sears Service Agreement:

1-800-827-6655

. 7 a.m - 5 p.m.CST, Mon.- Sat. -.. :. -
Parapedirserviciode reparack_ a domlcilto. y paraordenar piezasconentrega_ domicilio: l"888-SU-HOGAR _

. (1-888-784-6427)

Au Canadapourserviceen frar_ais: i _ 1.STT.LE.FOYERS_ {1-877-533-69371

Roebod_ z_d Co_

f HomeCer l" s ] seA
Registered Tr_nark I TM Trad_mrk _f _m_ Roebuc_ a_d Co, _ Regl_ I TM Mama de F_.lca de Se_s. Roeb_c_ and CO.

_ $_m,

FULL 90 DAY WARRANTY
For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in this "W, free of charge. For one year fi'om the date of purchase. Sears _11supply, at no charge, replacement for dafec_iva parts. The above warranty _overage applies only to'iV which are used for i_ivata household purposes. TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN THE "IV TO THE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES. This warranty gives you specif'_ legal rights, and you may also have other rightswhich vary ft'om state to state.
Sears Roebuck and Co., Dept. 817WA Hoffman EstateS, IL 60179 For the location of a Sears Service Center in your area : %800-488-1999 0EM_01909 lh_ntcdin Malaysia I.6200UA " " * * *_

YACHT CLUB VILLAS ENTERTAINMENT PACKAGE
Sylvania 32 in. Color TV with S-Video Input Sears item #05742204000 Mfr. model #SRT2432S
2 Bedroom: 1 - 32" Sylvania TV for Living room 3 Bedroom: 1 - 32" Sylvania TV for Living room 4 Bedroom: 1 - 32" Sylvania TV for Living room
Sylvania 27 in. Color TV with Composite Video Input Sears item #05747202000 Mfr. model #SRT2227S
2 Bedroom: 2 - 27" Sylvania TV's for Bedrooms 3 Bedroom: 3 - 27" Sylvania TV's for Bedrooms 4 Bedroom:: 4 - 27" Sylvania TV's for Bedrooms
Sylvania Dual Deck DVD/VCR Combo Sears item #05757184000 Mfr. model #SRD4900
2 Bedroom: 3 - Sylvania DVD/VCR Combo's 3 Bedroom: 4 - Sylvania DVD/VCR Combo's 4 Bedroom: 5 - Sylvania DVD/VCR Combo's
IF PRODUCT BECOME UNAVAILABLE SELLER RESERVES THE RIGHT TO SUBSTITUTE WITH A PRODUCT OF EQUAL OR GREATER VALUE