Page 3

F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE
ANTE NNA L EAD I N WI RE GROUND CLAMP
A NTENNA DI SCHARG E UN I T (NEC SECTION -2 0)
EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION -2 1)

G RO UND CL AM PS

NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART , PART H)
13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV/VCR through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/VCR. 18.Servicing-Do not attempt to service this TV/VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service-Unplug this TV/VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV/VCR. c. If the TV/VCR has been exposed to rain or water. d. If the TV/VCR does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/VCR to its normal operation. e. If the TV/VCR has been dropped or damaged in any way. f. When the TV/VCR exhibits a distinct change in performance-this indicates a need for service. 20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21.Safety Check-Upon completion of any service or repairs to this TV/VCR, ask the service technician to perform routine safety checks to determine that the TV/VCR is in proper operating condition. 22.Heat-This TV/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

REC/OTR

CHANNEL

VOLUME

EARPHONE

- REMOTE CONTROL - [Fig.2]

WAKE-UP /SLEEP

TV/FM CHANNEL RETURN

9 +100

MUTE VOLUME

DISPLAY

PLAY REW STOP
RECORD T-PROG. CLEAR COUNTER RESET SPEED GAME PAUSE/STILL
1 EARPHONE jack Connects to earphones (not supplied) for personal listening. The size of jack is 1/8 monaural (3.5mm). 2 AUDIO input jack Connect to the audio output jack of your audio equipment, video camera or another VCR. 3 VIDEO input jack Connect to the video output jack of your video camera or another VCR. 4 STOP button Press to stop the tape motion. EJECT button Press in the Stop mode to remove tape from TV/VCR. (only on the TV/VCR) L button Press to select setting modes from the on screen menu. Press to enter digits when setting program. (for example: setting clock or timer program) 5 REW button Press to rewind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search) s button Press to select a mode from a particular menu. (for example: LANGUAGE or USERS SET UP) 6 PLAY button Press to begin playback. K button Press to select setting modes from the on screen menu. Press to enter digits when setting program. (for example: setting clock or timer program) -8EN

Page 9

- REAR VIEW - [Fig.3]
7 F.FWD button Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine setting modes from on screen menu. Press to select a mode from a particular menu. (for example: LANGUAGE or USERS SET UP) 8 REC button Press for manual recording. OTR button Activates One Touch Recording. (only on the TV/VCR) 9 RECORD indicator Flashes during recording. Lights up in the Stand-by mode for Timer Recording. 10 Remote Sensor Window Receives the infrared signals from the remote control. 11 CHANNEL K / L buttons Press to select the desired channels for viewing or recording, listening of FM radio. You may display the main menu on the TV screen by pressing repeatedly this button on the TV/VCR. TRACKING function Press to minimize video noise (lines or dots on screen) during playback or Slow mode. (See page 21.) 12 VOLUME X / Y buttons Adjust the volume level. 13 POWER button Press to turn TV/VCR on and off. Press to activate timer recording. 14 Cassette compartment 15 Number buttons Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press the 0 button and then 1 to 9. +100 button When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press the +100 button then press 2 and 5).

16 MENU button Press to display the main menu on the TV screen. 17 DISPLAY button Display the counter or the current channel number and current time on the TV screen. (See page 16.) 18 SPEED button Press to choose the desired recording speed:SP/SLP. 19 T-PROG. CLEAR button Press to cancel a setting of timer program. (See page 28.) COUNTER RESET button Press to reset counter to 0:00:00. 20 GAME button Sets the game mode and external input mode at the same time. (See page 17.) 21 SLOW button Press to start slow motion playback. 22 PAUSE/STILL button Press to temporarily stop the tape during the recording or to view a still picture during playback. Frame Advance function Press to advance the picture one frame at a time during Still mode. 23 MUTE button Mutes the sound. Press it again to resume sound. 24 CHANNEL RETURN button Press to go back to the previously viewed channel. For example, pressing this button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3. 25 TV/FM button Sets the FM mode. (see page 16.) 26 WAKE UP/SLEEP button Sets the Wake up or Sleep Timer. (See page 29.) 27 Power cord Connect to a standard AC outlet (120V/60Hz). 28 ANT. terminal Connect to an antenna or cable system.

Page 10

PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (supplied) is detachable. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TV/VCR as shown in the diagram below.For the best reception, fully extend the VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.) NOTE: Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal. Bent pin
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
VHF Antenna (Not supplied) UHF Antenna (Not supplied) VHF/UHF Combiner (Not supplied)

Flat twin-lead cable

[Fig.5]
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can: 1) Use the TV/VCR remote to select channels. 2) Program one or more unscrambled channels for Automatic Timer Recording. NOTE: This unit will ONLY record and view the same channel.

From Cable System

Plug (Straight pin)
VHF/UHF Antenna (Not supplied)
(Needs to be straightened)

Rod Antenna (Supplied)

75-ohm Coaxial Cable (Not supplied)
[Fig.4] NOTE: The connection of an indoor antenna may not always give acceptable TV reception.
[Fig.6] Note to CATV system installer: This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Antenna/Cable Connections Continued on the Next Page. - 10 EN

Page 11

CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer recording is limited to one channel at a time.

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 AA penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover.
Satellite Box or Cable Box (Not supplied) From Cable System or Satellite Dish

EXTERNAL INPUT MODE

When using an external input signal (another VCR or video camera), connect the players audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHANNEL K or L button until AUX appears on the screen. AUX
[Fig.7] TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box.

- 11 -

Page 12

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
CHANNEL SET UP FOR THE FIRST TIME
Plug in the TV/VCR power cord
DELETING (OR ADDING) CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
Plug the TV/VCR power cord into a standard AC outlet. NOTE: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

CHANNEL SET UP ADD / DELETE CH (TV) B AUTO PRESET FM ANTENNA [INT]
Press the PLAY/K or STOP/L button to point to AUTO PRESET. Then, press the F.FWD/B button. The tuner scans and memorizes all the active channels in your area.
The tuner stops on the lowest memorized channel.

Select SETTING CLOCK

MENU TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USERS SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH

SELECTING THE LANGUAGE

Make sure. Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.
Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to SETTING CLOCK. Then, press the F.FWD/B button.

Select LANGUAGE

MENU TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USERS SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
Set D.S.T. (Daylight-Saving Time) to [ON]
SETTING CLOCK AUTO CLOCK AUTO CLOCK CH MANUAL CLOCK SET B D.S.T. [ON] [ON] [AUTO]
Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to LANGUAGE.
Press the PLAY/K or STOP/L button to point to D.S.T. Then, press the F.FWD/B or REW/s button until [ON] appears.
Exit the Daylight-Saving Time mode
Select ENGLISH or ESPAOL= Spanish using the F.FWD/B or REW/s button.
Press the MENU button on the remote control to return to TV mode.

Exit the Language mode

TO CANCEL THE DAYLIGHT-SAVING TIME
Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button.

- 13 -

Page 14
CLOCK SET UP (AUTO / MANUAL)
Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow AUTO CLOCK SETTING. If it is not, follow MANUAL CLOCK SETTING.

Set AUTO CLOCK to [ON]

SETTING CLOCK B AUTO CLOCK AUTO CLOCK CH MANUAL CLOCK SET D.S.T. [OFF] [ON] [AUTO]
Press the F.FWD/B or REW/s button repeatedly until [ON] appears.
Enter the channel number for the PBS station

SETTING CLOCK

AUTO CLOCK SETTING
You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure. TV/VCR power must be turned on. Confirm that the antenna connections are correct. The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) The channel is properly set in advance. (See page 13.) NOTES: Auto clock setting only needs to be set once. But it can be done again if the clocks time has become incorrect for some reason. If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. If you do not know what your local PBS station is, then follow Manual Clock Settings on page 15. The TV/VCR cannot control the channels of the cable converter box or satellite box.
Press the PLAY/K or STOP/L button to point to AUTO CLOCK CH. Then press the F.FWD/B or REW/s button until the channel number for your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local PBS station, and will select that channel.
AUTO CLOCK [ON] AUTO CLOCK CH [AUTO] MANUAL CLOCK SET B D.S.T. [OFF]
Exit the Auto Clock Setting

Turn off the TV/VCR

Turn the TV/VCR off. Because the Auto Clock functions automatically while the TV/VCR is off. If you choose [AUTO], the TV/VCR must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the XDS signal. if the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature.

- 14 -

Page 15

MANUAL CLOCK SETTING

- 16 -

Page 17

TV OPERATION

WATCHING A TV PROGRAM

PICTURE CONTROL

The TV/VCRs picture controls BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image. NOTES: Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. When setting the Picture Control, the Game mode will be cancelled. Make sure. TV/VCR power must be turned on.
Select the channel number
Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.

Adjust sound

Select PICTURE CONTROL
MENU TIMER PROGRAMMING B PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USERS SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
Press the VOLUME X or Y button to adjust the volume.

VOLUME 20

C C C C C CCCCCCC
Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to PICTURE CONTROL. Then, press the F.FWD/B button.

GAME MODE

This function enables you to decrease the TV screen contrast and making it suitable for use with a TV GAME. NOTE: This function can not be set during recording. Press the GAME button on the remote control. GAME appears on the screen.
Select item you want to adjust
Press the PLAY/K or STOP/L button until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS

BRIGHT

PPPPPPPCPPPPPPP+
When you press the GAME button; The TV/VCR comes on automatically if it is off. The TV/VCR will be in external input mode automatically.
Adjust the picture control
Press the F.FWD/B or REW/s button to adjust to your desired level. REW/s to decrease brightness to decrease contrast to pale to purple to soft F.FWD/B to increase brightness to increase contrast to brilliant to green to clear

TO CANCEL THE GAME MODE

Press the GAME button or CHANNEL K or L button on the remote control.
BRIGHT CONTRAST COLOR TINT SHARPNESS

DEGAUSSING

Magnetism from nearby appliances might affect the color of the TV picture. If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.
If there is a power failure of any kind, the unit will

TRACKING ADJUSTMENT Tracking adjustment will be set automatically
(Digital Tracking function) when you start playback. However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. You can reduce the noise lines by pressing the CHANNEL K or L button in slow mode, too. Tracking adjustment in Slow mode will not be set automatically. NOTE: In Still mode, press the SLOW button and press the CHANNEL K or L button until streaks disappear. To return to Still mode, press the PAUSE/STILL button again.

STILL PICTURE

You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.Press the PLAY button to return to playback. NOTES: You can advance the picture one frame at a time by pressing the PAUSE/STILL button during the Still mode. If it is left in the Pause mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button. NOTE: If there are video noise lines on the screen, see Tracking Adjustment section.

- 21 -

Page 22

SPECIAL PLAYBACK

Make sure. TV/VCR power must be turned on. Insert a prerecorded tape. Before playback, follow steps below.

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds.

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

Select USERS SET UP

MENU TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USERS SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to USERS SET UP. Then, press the F.FWD/B button.

Set RENTAL to [ON]

USERS SET UP

Select ALL or BLANK

Press the PLAY/K or STOP/L button to point to RENTAL. Press the F.FWD/B or REW/s button until [ON] appears.

Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

Begin recording

Press the RECORD button.

Stop recording

Press the STOP button when recording is completed.

- 25 -

Page 26
OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure. TV/VCR power must be turned on. Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: This function CANNOT be done from the remote control. Recording starts immediately when the REC/OTR button is pressed. When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode. To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control. To show the remaining time, press the DISPLAY button on the remote control so that OTR appears on the TV screen. (It will show up momentarily then disappear.) Recording stops when 0:00 is reached. Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off.
Push(es) 1 push 2 pushes 3 pushes 17 pushes

Display 0:30 1:00 8:00

Recording length (normal recording) 30 minutes 60 minutes 480 minutes
COPYING A VIDEO CASSETTE (Requires a VCR or camcorder)
You can make copies of video tapes made by friends or relatives for your enjoyment. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect your TV/VCR and a Source (Playing) VCR using the following diagram. [Fig.8]

[The TV/VCR]

AUDIO VIDEO
[Ex: Source (playing) VCR or camcorder] Audio/Video adapter cable (not supplied)

VIDEO OUT AUDIO IN

Press the number buttons on the remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette, or one you want to record over, into the TV/VCRs cassette compartment. 3)Press the SPEED button on remote control for the 2 Select the tape speed TV/VCR to select the desired recording speed Press the SPEED button to select the desired tape (SP/SLP). speed (SP/ SLP). 4)Press the CHANNEL K or L button on the TV/VCR until AUX appears on the screen. 3 Begin OTR 5)Press the RECORD button on the TV/VCR. Press the REC/OTR button on the 6)Begin playback of the tape in the source (Playing) TV/VCR as many times as needed. VCR or camcorder. The recording length will be deterNOTE: For best results during dubbing, use the mined by the number of times you press the REC/OTR button. Each additional push will TV/VCRs front panel controls whenever possible. increase the recording time by 30 minutes. It is set up The remote control might affect the source (Playing) VCRs playback operation. to 8 hours. - 26 EN

Press the PLAY/K or STOP/L button until the desired hour appears. (Example: 7, PM for 7:30PM) Then, press the F.FWD/B button.
- - -/- - - - - -:- - - -/- - - - - -:- - - -/- - - - - -:- P B 61 7/06 FRI 7:12 M - - -/- - - - - -:- - - -/- - - - - -:- - - -/- - - - - -:- - - -/- - - - - -:- -

Set beginning minute

TIMER PROGRAMMING CH DATE BEGIN END -:-:-:-:-:-:-:-:- - -/- - - - - -:- - - -/- - - - - -:- - - -/- - - - - -:- P B 61 7/06 FRI 7:30 M - - -/- - - - - -:- - - -/- - - - - -:- - - -/- - - - - -:- - - -/- - - - - -:- -
Press the PLAY/K or STOP/L button until the desired minute appears. (Example: 30 for 7:30PM) Then, press the F.FWD/B button.

Set end hour

TIMER PROGRAMMING CH DATE BEGIN END
Press the PLAY/K or STOP/L button until the desired hour appears. (Example: 8, PM for 8:50PM) Then, press the F.FWD/B button.
- - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - P P B 61 7/06 FRI 7:30 M 8:30 M - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - -

Set end minute

Press the PLAY/K or STOP/L button until the desired minute appears. (Example: 50 for 8:50PM) Then, press the F.FWD/B button.
- - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - P P B 61 7/06 FRI 7:30 M 8:50 M - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - -

TO CORRECT A PROGRAM

While setting a program; press the REW/s but
ton to go back one step and enter the correct numbers using the PLAY/K or STOP/L button. After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 27. 3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button. 4)Press the POWER button to set automatic timer recording.

Set the tape speed

Press the PLAY/K or STOP/L button until the desired tape speed appears. (Example: SP)
- - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - P P B 61 7/06 FRI 7:30 M 8:50 M SP - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - - - -/- - - - - -:- -:- - - -

1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-968-3429, to locate an Authorized Service Center. NOTES: Remember to read the instructions included with the video head cleaner before use. Clean video heads only when problems occur.

AUTO HEAD CLEANING

Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture. Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your TV/VCR may need to be cleaned.

SERVICING

Should your TV/VCR become inoperative, do not
try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800968-3429, to locate an Authorized Service Center.

- 30 -

Page 31

TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No power. No picture and sound. CORRECTIVE ACTION
No picture or poor picture on TV/VCR. No sound or poor sound. Timer recording is not possible.
Cannot go into Record mode. Playback picture is partially noisy. No picture but the audio is OK in playback. No operation by infrared Remote Control. Video or color fades in and out when making a copy of a video tape.
Make sure the AC cord is connected to an AC outlet. Make sure the power is turned on. Make sure the AC cord is connected to an AC outlet. Check antenna connection. Let the TV/VCR program its tuner memory. Adjust direction or replace antenna. Adjust picture controls. Adjust volume control on remote control or main unit. Press the MUTE button to restore sound. Make sure the timer recording is set correctly. Make sure the power is off. Make sure the TV/VCR clock is set correctly. Make sure the tape has an erase-prevention tab. If need, cover the hole with plastic tape. Adjust tracking control for a better picture using the CHANNEL K or L button on the TV/VCR. Head cleaning may be necessary. Refer to AUTO HEAD CLEANING on page 30. Make sure the AC cord is connected to an AC outlet. Check batteries in remote control. You can not copy a copyrighted video tape. You are experiencing copy guard protection.

CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/VCR is showing captions You are watching a live broadcast and spelling errors made by the that are misspelled. closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions. My TV/VCR will not show the text Captions that are delayed a few seconds behind the actual dialogue in its entirety or there is a delay of are common for live broadcast. Most captioning production companies what is being said. can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue. My captions are scrambled with Interference caused by building, power lines, thunderstorms, etc. white boxes on the TV screen. may cause scrambled or incomplete captions to appear. My program guide listed a TV show Broadcasters may at times use a time compression process to speed as being closed captioned but none up the actual program so that additional advertising time can be of the captions were displayed. given. Since the decoder cannot read the compressed information, captions will be lost. My prerecorded video tape does not The video tape was either an illegal copy or the tape duplicating show any captions. The tape box company accidentally left out the captioning signals during the mentions it being closed captioned. copying process. My TV screen shows a black box You are in the TEXT mode. Select CAPTION mode to CAPTION on certain channels. [OFF].

- 31 -

Page 32

SPECIFICATIONS

GENERAL SPECIFICATIONS
CRT : 13 inch in-line gun, 90 deflection tube Television system : NTSC-M Closed caption system :15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UHF : #14~#69 CATV VHF : 5A MID band : A5~A1, A~I SUPER band : J~W HYPER band : W+1~W+84 FM : 88~108MHz Terminals Antenna input : VHF/UHF 75 ohms unbalanced Video input : RCA connector [ 1 Audio input : RCA connector [ 1 Earphone : 1/8 monaural (3.5 mm)

- 35 -

T5205BCV.QX33

7:29 PM

Page 48

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION: PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LABOR:

LIMITS AND EXCLUSIONS: This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.