five channel amplifier 100x5R

www.tagmclarenaudio.com

setting a new standard for multi-channel amplification
The 100x5R is a high-performance five-channel power amplifier producing sound of outstanding clarity and purity. Remote controlled, multi-room ready and fully upgradable, the 100x5R is a safe investment for the future. It took a dedicated design team more than a year to perfect the 100x5R. Every aspect of the amplifier was defined, evaluated and refined until the best performance was achieved. The 100x5R perfectly complements our internationally acclaimed av processor AV32R, delivering the drama and excitement of home-cinema, without compromising true audiophile sound. But the 100x5R is not limited to movies. Equipped with two channels it also enhances stereo music performances beautifully.
Performance: True monobloc design
The 100x5R consists of five identical amplifier modules, installed in a single compact enclosure. Each module is a complete, self-contained power amplifier, often referred to as a monobloc, known by experts as the ultimate design for perfect sound reproduction. The great strength of a monobloc design is that none of the channels are affected by what is happening on any of the others, allowing movies and music to be reproduced with their true impact.

Features

Available in black or metallic silver Modular, upgradable design True monobloc construction for best clarity and channel separation Available in any number of channels Unused channels can be switched off for ultimate sound quality (this can be automatically done if connected to the av processor AV32R) Full remote control TAGtronic Communication Bus for software upgrades via the Internet using a PC Multi-room expandable Powerful micro-controller to control and monitor all functions for maximum performance and reliability Sophisticated muting and loudspeaker protection system Straight Line Technology ensures the shortest, most accurate signal path for highest signal purity Mixed technology construction employs leaded components for best sound quality and surface mount for accurate digital control Premium-grade audio components, e.g. Vishay resistors and Wima capacitors, for best transparency and clarity Proprietary gold plated oxygen-free high purity copper (OFHC) loudspeaker terminals for most accurate signal transfer Massive power reserves
Versatility: From stereo to home cinema
The 100x5R can be purchased with any number of amplifier modules fitted. As your system grows, further modules can be added without penalty to the overall performance. For the best sound quality and lowest energy usage unused channels can be switched off using the remote control.

Enhanced TAGtronic Bus

The 100x5R can be totally controlled by TAG McLarens av processor AV32R, including standby, number of active channels, front indicators brightness and full remote control. This allows the 100x5R to be placed out of sight and to be run very efficiently.
100x5R in metallic silver Most striking is the complete clarity of the amplifiers presentation

Gramophone - July 2000

Modular design, fully upgradable
The 100x5R construction is fully modular, allowing new amplifier modules to be fitted when technology advances. The integrated TAGtronic Communication Bus enables full software upgradability via the Internet using a PC.
We have never seen such identical frequency response from all channels in our AV-laboratory and in terms of output power the 5 x 145 Watts into 8 ohms, respectively 5 x 235 Watts into 4 ohms, are not easily challenged by others.

Audiovision - May 2000

We have never auditioned a better multi-channel amplifier. Sound quality: extraordinary. AUDIO - Feb 2000
a w a rd w i n n i n g t e c h n o l o g y
Powerful micro-controller and full remote control
The 100x5R, unusually for a power amplifier, contains a very powerful micro-controller for maximum performance. It is fully remote controlled either via its remote handset or the Enhanced TAGtronic Communication Bus. The micro-controller controls the power-up sequence of each module, preventing excessive inrush current. It also monitors each amplifier module, automatically shutting down individual modules if any fault condition, such as a short circuit on the output, occurs. The micro-controller can also turn off individual channels to provide best audiophile performance when listening to two channel stereo.

Total control via the AV32R
The av processor AV32R can control standby, number of active channels, the brightness of the front LEDs and relay remote commands.

Purest connections

A high quality, gold plated, PTFE insulated RCA phono connector links the input to each amplifier module through oxygen-free high purity copper (OFHC) wires. The module output chokes are also wound from solid core OFHC wire. The 100x5R features TAG McLaren Audios proprietary oxygenfree pure copper loudspeaker terminals for the best sound quality. The surfaces of the terminals are gold plated to protect against corrosion. The same ultra high quality OFHC, PTFE insulated wiring used in our Cable AvantGarde loudspeaker cables is used to connect the amplifier modules to the loudspeaker terminals.

100x5R in black

Technical Specification
Colour Rated output power Typical output power black anodised or metallic silver paint 100 W per channel into 8 Ohms 120 W per channel into 8 Ohms 160 W per channel into 4 Ohms 190 W into 2 Ohms for short periods Input for full rated power Input impedance Gain Signal to noise Frequency response 1.0 V rms 47 kOhm nominal 29.0 dB at 1 kHz greater than 90 dB (relative to 0 dbW) 0.05 dB from 20 Hz to 20 kHz -3 dB @ 0.2 Hz and 87 kHz Total harmonic distortion + noise less than 0.002% (at 1 kHz 100 W into 8 Ohms) less than 0.05% from 20 Hz to 20 kHz (at 100 W into 8 Ohms) Polarity Remote Control TAGtronic Bus Control Operating temperature range AC supply frequency AC supply voltage Power consumption Dimensions (W x H x D) Weight
Specification may vary for different countries.

Premium-grade components

The 100x5R uses high precision, ultra-stable, metal film Vishay resistors and low dielectric loss Wima polypropylene capacitors for improved sound transparency and excellent noise suppression. Premium audio grade reservoir capacitors are employed in the module power supplies to ensure tight, controlled bass performance.
non-inverting all functions all functions plus upgrade C Hz 100 V, V or V depending on country less than 1400 W 445 x 152 x 395 mm approx. 26.5 kg
Aluminium Chassis Individual, large round core transformers
Each amplifier module uses a purpose-designed, round-core transformer, specially wound to achieve high output and excellent voltage regulation combined with extremely low flux leakage and very low noise. Extensive research during the development of the 100x5R revealed that mild steel chassis, almost universally used, have a damaging effect on sound quality. The 100x5Rs chassis, cover, fascia and heatsinks are all made from aluminium. The improved transparency justified the higher cost.
We reserve the right to alter design and specification without notice.
For further information e-mail our helpdesk on:

Straight Line Technology

The 100x5R employs Straight Line Technology, preventing inter-modulation distortion through a direct coupled signal path for ultimate fidelity.
tmahelpdesk@internationalaudiogroup.com
or visit our website at: www.tagmclaren.com
Copyright 2004 Pointfield Limited a member of the International Audio Group.

+44(1480) 447700

Fax: +44(1480) 431767

100x5R 8666J

The TagMclaren sign is a registered trademark of Mclaren Group Limited.
IAG House Sovereign Court, Ermine Business Park Huntingdon, PE29 6XU

GRP00940.01-UK 100x5R-10.qxd

10/17/02

5:17 PM

Page 01

owners manual
controls welcome introduction the 2 x 80 Watt Stereo module 120 Watt Monobloc module once installed in the 100x5R:10 safety first Stereo modules operating modes Monobloc module power and loudspeaker connection 34

contents

AV processor connection power up and switch on remote control extended remote control TAGtronic communications Bus software upgrades grounding and hum running in and warming up care and maintenance service technical data

100x5R:10

10010B

Page 02

controls
RISK OF ELECTRIC SHOCK DO NOT OPEN
multi-channel amplifier 100x5R:10 s
1 power / standby LED 2 ve module status LEDs 3 mute LED
4 remote control receiver window 5 remote control active LED 6 power button
Specification shown may var y for different countries

Page 03

The 100x5R:10 can be equipped with 120W Monobloc modules and 80W Stereo modules, allowing the amplier to be congured with up to 10 channels. The conguration below shows the most frequently used version consisting of 3 Monobloc modules and 2 Stereo modules, giving in total 7 channels of amplication.

7. 8. 9. 10. 11.

2 B 1 B

1 A 1 A

IN OUT

1 C power x2

Double insulated: When servicing, use only identical replacement parts.

INPUTS

CAUTION
220-240V ~ 50-60Hz Fuse; T1A L250V

OUTPUTS

serial number

made in United Kingdom

TAGtronic Communications Bus fuse carrier line level inputs 1 & 2 of Stereo module mode selection switch (stereo, bi-amp, bridged) single line level input of Monobloc module AC supply socket
13 loudspeaker terminals of channel A (Stereo module) 14 loudspeaker terminals of channel B (Stereo module) 15 loudspeaker terminals of Monobloc module

Page 04

This picture shows the rear panel layout of a 100x5R:10 equipped with ve Stereo modules, offering an amazing 10 channels of amplication.

Page 05

welcome

welcome to

TAG McLaren Audio exists with one aim in mind: to produce the very best audio and audio-visual equipment. Like many people, I often have my best ideas when relaxing to a piece of music or watching a movie. For years, knowing the technical capabilities of TAG McLaren, I have nurtured the ambition to push music and movie reproduction to the absolute limit without compromising ease of use; thats why we formed TAG McLaren Audio. TAG McLarens aim is sonic perfection combined with aesthetic delight and solid build quality a rare combination in hi- but one which this product is already delivering.
Dr. Udo Zucker Chief Executive Ofcer TAG McLaren Audio
Pushing technological boundaries; TAG McLarens F1 electronics

Dr Udo Zucker

Page 06

introduction

Thank you for purchasing the TAG McLaren Audio
ten channel amplifier 100x5R:10
The 100x5R:10 is an advanced design, based on the highly regarded ve channel amplier 100x5R. It has been launched in response to requests of our customers to offer a convenient addition of channels to expand their 5.1 systems to 7.1 channels or to allow easier use of bi-amplication in their systems. The 100x5R:10 can be equipped with any combination of the powerful 120 Watt Monobloc module, used in the 100x5R, and a new 120 Watt / channel Stereo module, providing between 2 and 10 channels of amplication. Versions purchased with fewer than 10 channels may be upgraded to add extra channels at a later stage.

Page 07

TAG McLaren provides complete solutions, shown here are the DVD player DVD32R, AV processor AV32R and 100x5R:10

Page 08

the 2 x 80 Watt Stereo module

advanced technology

The new 80 Watt / channel Stereo module has been made possible by design advances that rst appeared in the threechannel amplier 250x3R, itself based on technology developed for the remarkable F1 monobloc amplier F1- 600MR.

versatility

The new Stereo module offers a high degree of exibility, with three operating modes, conveniently selected by a switch on the back of the module: a conventional two-channel mode providing 2 channels of 80 Watt each a bi-amplication mode in which both 80 Watt channels are driven from one input a channel bridging mode that provides a single channel of conservatively-rated 120 Watt, just like the Monobloc module, described on page 10

5:18 PM

Page 09
the 2 x 80 Watt Stereo module key features
self contained Stereo amplier module, including all essential components three operating modes: stereo, bi-amp & bridged mixed technology construction premium-grade audio components bi-polar output transistors for best linearity Cascode Compensation for highest stability exceptionally accurate quiescent stability for best sound quality minimal intermodulation distortion through high bandwidth Straight Line technology for unlimited bass performance Purity and delity through low distortion aluminium to prevent magnetic interaction with magnetic stray elds

Page 10

120 Watt Monobloc module
best sound quality by monobloc design
Audiophiles have known for many years that precision, clarity, stereo image and depth can be improved by using so-called monoblocs or single channel ampliers. Providing completely independent amplication for each channel prevents interaction between them, resulting in a cleaner signal and hence better clarity and stereo imaging. This is true whether dealing with two channels or ve! The 120 Watt Monobloc module is a complete self-contained amplier, including its own power transformer, bridge rectier, energy storage capacitors and amplication stage, requiring only mains supply and control signals for operation. The Monobloc module uses its own aluminium heat sink for excellent heat dissipation, allowing each module to drive even more critical loudspeakers safely and totally independently of any of the other modules.

Page 11

As a result of the Monobloc amplier module construction, its performance is independent of the number of channels being driven and therefore even during the loudest passages of your favourite movie, the sound stage remains stable, controlled and detailed. The 120 Watt power output into 8 Ohm of the Monobloc module is a conservative rating, as it typically delivers 150 Watt into 8 Ohm, over 200 Watt into 4 Ohm and over 400 Watt into 2 Ohm (IHF toneburst).

key features:

self contained monobloc design for lowest channel interaction high power reserves mixed technology construction premium-grade audio components bi-polar output transistors for best linearity minimal intermodulation distortion through high bandwidth Straight Line technology for unlimited bass performance Purity and delity through low distortion aluminium to prevent magnetic interaction with magnetic stray elds

Page 12

once installed in the 100x5R:10
best sound quality through independence All modules in the 100x5R:10 are completely independent, ensuring that heavy demand on one module has no effect on another with each module having its own high-efciency heatsink and power supply. The only feature shared is the control circuitry which allows each module to be switched on and off individually using a micro-controller. This micro-controller is also used to switch off the amplier should problems be detected in a given channel. from 2 to 10 channels Stereo modules may be combined with Monobloc modules, providing between 2 and 10 channels of amplication.
adding channels The 100x5R:10 can be factory assembled with 2 to 10 channels. Retrospective upgrade to a higher number of channels is possible without losing or compromising quality. The installation is carried out at an authorised TAG McLaren Audio service centre, as each module is connected by solder joints instead of using less reliable connector constructions which often affect sound quality.

Page 13

once installed in the 100x5R:10 heading
full remote control The 100x5R:10 offers full remote control in addition to the TAGtronic Bus for control of channels / modules by AV processors. For added convenience, the full remote control allows the user to shut down specic modules, e.g. when listening to two channel stereo. The remote control also allows the user to adjust the volume of TAG McLaren AV processors and to operate TAG McLaren DVD players. TAGtronic Communications Bus The TAGtronic Communications Bus enables products equipped with this advanced interface to transfer and share information easily. For example the Bus allows TAG McLaren Audio AV processors to control the 100x5R:10 remotely. For details see later in this manual. standby without regret The control circuitry for the 100x5R:10 is powered by its own small transformer for optimum sound quality and the most efcient energy usage in standby. muting Both module types include a sophisticated muting system which prevents loud, annoying switching noises and which protects the amplier and loudspeakers.
software upgrades The micro-controller in the 100x5R:10 stores its software in re-programmable memory, which can be re-programmed with updated software using a PC suitably connected via the TAGtronic Programming Cable. Details of future upgrades will be published on TAG McLarens website www.tagmclaren.com

Page 14

pure oxygen free copper loudspeaker connectors For excellent sound quality the 100x5R:10 uses high grade gold plated(1) oxygen free high purity copper (OFHC) loudspeaker terminals, designed and manufactured by TAG McLaren. Very few companies provide OFHC loudspeaker terminals due to the difculties in machining solid copper. The benets of OFHC are clearly audible: improved clarity and transparency, even when compared to high percentage copper alloy terminals. The knobs of the 100x5R:10 have been manufactured from nonconductive Pocan without a metal insert as it was found that this gave the best sonic result as it minimises the cross section, essential for best electro-magnetic compatibility. The TAG McLaren loudspeaker terminal allows for spade connection, as it is superior to all other types of loudspeaker cable connections. Please make sure that you use a high quality loudspeaker cable, such as our Cable AvantGarde F3-10- SPK.

Plating is carried out directly on the OFHC without using a nickel separator, such as is often applied, as its use would be clearly audible as a more grainy sound. However, without this separator the copper atoms will slowly diffuse into the gold plating, making it lose its brilliant shine and gold colour. This change of colour and shine has no affect on the sound quality, it is a purely cosmetic affect which has been accepted by our engineers in the pursuit of the best sound quality

5:19 PM

Page 15
made to last The nned centre section of the three part fascia is machined from a solid aluminium extrusion and is then ne-paint nished. The two end caps are machined, bead blasted and linished to create an even texture which is then hard black anodised or painted. vibration damping The cover panel is stiffened by formed ribs, then bonded with viscoelastic laminate to provide a low Q panel which provides rapid absorption of externally induced vibrations.
mounting feet The outer shell of custom designed rubber damping mounting feet carries a polyurethane disk which protects the surface of furniture. hardware upgrades The 100x5R:10 can be upgraded in the future by replacing amplier modules, should even better amplier technology become available.

Page 16

safety first
preparation We know you are keen to get your 100x5R:10 up and running. This section will have you listening as quickly as possible. The controls diagrams located on pages 2-4 of this manual will help you nd your way around your 100x5R:10(1).
To prevent the risk of shock follow these instructions carefully. If in doubt consult a qualied electrician.

positioning

The 100x5R:10 is capable of consuming over 1300 Watts of electrical power during demanding presentations. This results in signicant heat being generated. Please ensure that there is adequate ventilation above and below the unit. The ventilation of the 100x5R:10 should not be impeded by covering the ventilation slots with items such as newspapers, table cloths, curtains etc. Place the 100x5R:10 on an open at surface. Do not use in a cabinet or on a soft surface such as a carpet. Do not place any other piece of equipment on top of the 100x5R:10. Do not place naked ame sources such as lighted candles on the 100x5R:10. Do not expose the 100x5R:10 to dripping or splashing liquids. Do not place objects lled with liquids, such as vases, on or near the 100x5R:10.

before you start

Make sure that all the components of your system are disconnected from the mains supply whenever you change any connection.
the front panel power switch
Please be aware that even when the front panel switch is in the off position, the unit is still connected to the mains supply. If the unit is not to be used for some time, unplug the mains connector from the wall socket outlet.
Throughout this instruction manual, bold print indicates the lettering that you will find on the panels of your 100x5R:10 and the remote control

Page 17

Stereo modules operating modes
Stereo modules can be combined with Monobloc modules, providing between 2 and 10 channels of amplication. The next paragraph describes the operating modes of the Stereo module. See page 19 for details on the Monobloc module. Each Stereo module offers three different modes of operation, selected by a slide-switch on the rear of the module:

Stereo mode

Switch position 1 -> A In this mode, the two channels within a Stereo module are independently fed from their two separate INPUTS. The maximum power output with both channels driven is 80 Watt / 8 Ohm. The signal connected to line INPUT 1 will be available, in amplied form, on the loudspeaker connectors OUTPUTS A. 2-> B

bi-amplification mode

Switch position 1 -> A 1-> B In this mode both channels within a Stereo module are driven from INPUT 1 - any signal connected to INPUT 2 will be ignored. The maximum power output with both channels driven is 80 Watt / 8 Ohm.
This mode is used to drive e.g. two sections within a loudspeaker with separate ampliers through two sets of connecting speaker cables (-> bi-amping).
The signal connected to line INPUT 2 will be available, in amplied form, on the loud-speaker connectors OUTPUTS B.
Dont forget to remove any link between the two sections of your loudspeaker to prevent damage to your amplier!

Page 18

Channel Bridging mode
Switch position 1 -> C power x 2 In this mode both amplier channels are combined to give an amplier of higher power - with very close performance to that of the single channel amplier of the Monobloc module. The power output of the combined amplier is 120 Watt / 8 Ohm. The combined amplier is driven from INPUT 1, any signal presented to the INPUT 2 is disregarded. In this mode the loudspeaker must be connected between the OUTPUTS C + and the OUTPUTS C - terminals, as shown. The positive (red or +) connection to the loudspeaker goes to C + terminal and the negative (black or -) to the C - terminal.

Changing modes

Do not change the mode with power applied or if music is playing as this can destroy your amplier or loudspeakers! Do not change any connection without powering down all your components in your system as otherwise you can destroy your amplier, preamplier or loudspeakers!

Page 19

Monobloc module
You can install Stereo modules and Monobloc modules into the 100x5R:10, providing between 2 and 10 channels of amplication. The previous paragraph described the three different modes available for the Stereo module. This paragraph covers the Monobloc module: The Monobloc module offers a single channel high power mode, in which the signal connected to INPUT 1 is amplied and made available through loudspeaker OUTPUTS A. The Monobloc module does not contain an INPUT switch, INPUT 2 or OUTPUT B connectors.

Page 20

power and loudspeaker connection

power connection

Check that the power button is out, so that the power is off when you plug the unit in(1). Do not connect the power cable until you have made all other connections.

loudspeaker connection

On the rear panel of the 100x5R:10 you will nd up to ten pairs of loudspeaker terminals, designed to accept high quality 8 mm spade connectors. Connection to a Stereo module should be done as described in the section operating modes; connection to a Monobloc module as described on page 19. Only use high quality loudspeaker cables, such as our TAG McLaren F3-10-SPK, terminated with high quality 8 mm spade connectors.
The power button is a latching switch. One press will hold it in; the next will release it

Page 21

AV processor connection audio-visual processor or preamplifier connection
You will require an audio-visual processor (such as our AV32R) or a preamplier (such as our DPA32R) to provide the signals to drive the 100x5R:10. Use good quality, screened phono-phono audio cables, such as the TAG McLaren F3-10-ANA, to connect between the phono socket output on the processor / preamplier and the phono socket input on the rear panel of the 100x5R:10. Details are given in the section operating modes and Monobloc module connections, on page 19. Ensure that the correct processor / preamplier output e.g. left front is connected to the 100x5R:10 module which in turn is connected to the left front speaker. Continue in this manner until all of the channels are connected. When you have completed the set-up and have connected all cables between all components, ensure that the volume control on the AV processor / preamplier is set to minimum before switching on.

Recommended connections when using a 100x5R:10 with 7 channels Most seven channel versions of the 100x5R:10 will be built as shown on page 3, ie: Monobloc, Stereo, Monobloc, Stereo, Monobloc. It is recommended that you attach the speakers of a 7.1 conguration as follows (looking at the rear panel of your 100x5R:10)(1):
RIGHT FRONT SPEAKER SURROUND LEFT/RIGHT SPEAKERS CENTRE SPEAKER BACK LEFT/RIGHT SPEAKERS LEFT FRONT SPEAKER
This way the ve module status LEDs will be associated as follows(1)
CENTRE SPEAKER LEFT FRONT SPEAKER RIGHT FRONT SPEAKER

BACK LEFT/RIGHT SPEAKERS

SURROUND LEFT/RIGHT SPEAKER
This configuration will also allow the AV processor AV32R, if connected to the 100x5R:10 via TAGtronic bus, to deactivate modules not required, e.g. Backs in 5.1

Page 22

power up and switch on
After connecting your preamplier / AV processor and your loudspeakers connect the power cable, supplied to the 100x5R:10(1). Press the power button in. The blue power LED will come on. The ve module(2) status indicators will ash as the amplier modules power up sequentially to prevent excessively high current demand from the mains supply. When all ve modules have been activated, you should see the ve red LEDs softly illuminated, showing that all ve modules have energised. Then the amplier is ready to play source material through the system. Raise the volume level at your AV processor or preamplier slowly at rst, until sound is replayed through the audio system. Sit back and enjoy!
Check that the power button is out, so that power is off when you plug in Assuming you have five modules installed

Page 23

remote control class leading ergonomics
The 100x5R:10 is equipped with a sophisticated microcontroller to monitor and control the 100x5R:10. The + + performance of this processor, activated -by a compact remote control, allows for + class-leading ergonomics, such as -the exibility not only to mute the complete amplier but also to have control over each power amplier module. Therefore, if you play e.g. CDs in stereo, you only need to switch on the left and right channels.

S TA N D B Y AV

confirming remote reception
Whenever the 100x5R:10 receives valid infra red (IR) instructions from the remote control it acknowledges the command by ashing the remote control active LED.

100x5R:10 mute

The sound output of the complete amplier can be muted using the single mute amp button on the remote control. This is a toggle action command - one press will mute and a second will un-mute. When muted, the 100x5R:10 merely disconnects the loudspeakers. The amplier is still running and sound will be restored instantly when the mute amp button is pressed again. When the 100x5R:10 is muted, the mute LED, above the power button, will illuminate.

channel

A V input
For added convenience, TAG McLaren Audio has integrated the main control functions for their AV processors and dvd players. The complete audio-visual system can be started, stopped or muted from the 100x5R:10 remote control.

Page 24

remote control channel standby
The 100x5R:10 allows for switching individual modules into power-saving standby mode. This is benecial e.g. when replaying two channel stereo. To use this function, certain buttons must be operated in combination: Pressing the STANDBY amp key, followed within one second by one of the keys 1, 2, 3, 4, 5 will toggle the associated module in and out of standby. Module 1 is installed at the left, module 5 at the right, looking at the rear panel of the 100x5R:10, etc. To switch several modules in or out of standby together, press STANDBY amp, immediately followed by any sequential combination of numbers. Modules switched into standby will extinguish their associated module status LED - only active modules are illuminated.

100x5R:10 standby

The 100x5R:10 is provided with a standby mode which is entered when pressing the STANDBY amp key on the remote control. This function will switch off the power supplies of all installed amplier modules. The control section of the 100x5R:10 remains active to monitor the status of the 100x5R:10 and to wait for a wake-up command from the remote control. Pressing the STANDBY amp key on the remote control again will wake-up the 100x5R:10. It will run through the start-up procedure which takes approximately 10 seconds until the unit is nally un-muted. All module status LEDs will extinguish and the blue power / standby LED will dim (if not switched off by the AV processor AV32R via TAGtronic Bus - for details see the AV32R user handbook).

Page 25

extended remote control Basic control of AV processor and DVD player
STANDBY av Pressing this key switches the AV processor AV30R or AV32R in and out of standby. STANDBY dvd Pressing this key switches the DVD player DVD32R or DVD32FLR in and out of standby. STANDBY all Pressing this key will switch the amplier, DVD player and AV processor in and out of standby, assuming the products are connected by the TAGtronic Bus. DVD play / pause Pressing this key will toggle the DVD32R / DVD32FLR between play and pause. DVD stop Pressing this key will stop the DVD32R / DVD32FLR, playing a disc. AV volume + / Pressing these keys will increase / decrease the volume setting of the AV30R / AV32R. AV input + / Pressing these keys will step the AV30R / AV32R through all available audio and video inputs in sequence.

S TA N D B Y

vo se lu me

Page 26

TAGtronic Communications Bus
The 100x5R:10 features the TAGtronic Communications Bus. This will allow TAG McLaren Audio products to work seamlessly together to form an effective, fully integrated system. Remote control codes can be transferred from a TAG McLaren AV processor or DVD player to the 100x5R:10 over the TAGtronic Bus, allowing the 100x5R:10 to be operated out of sight. It can therefore be mounted in a convenient unobtrusive location, as long as it is provided with adequate ventilation. The AV30R / AV32R can also control mute, channel switching and mute via the TAGtronic Bus, for details see the AV processors operating manual.

Page 27

software upgrades
One of the exible aspects of the 100x5R:10 is that it includes a micro-controller using a re-programmable memory, which can be re-programmed using a suitably equipped PC connected via the TAGtronic Programming Cable (optional - not included with the 100x5R:10). Details of future upgrades are published on www.tagmclaren.com
reprogramming the 100x5R:10
getting the goods In order to upgrade the 100x5R:10 with the latest software you need to have the following items: 1) 2) 3) 4) A suitably equipped PC to interface with the 100x5R:10 The TAGtronic Programming Cable - not included with the 100x5R:10 The TAGtronic Upgrade Wizard Version v2.10 or later The 100x5R:10 software you would like to download to your 100x5R:10
Item 2 can be purchased from your retailer or ordered from the online shopping section of www.tagmclaren.com. Items 3 and 4 can be downloaded free of charge from www.tagmclaren.com - just visit the Club and click on software upgrades. Once you have installed the TAGtronic Upgrade Wizard to your PC, download the latest 100x5R:10 software and after downloading is complete register it with the Upgrade Wizard by double-clicking it.

Page 30

grounding and hum
The mains supply operates at either 50 Hz or 60 Hz, (depending on which country you are in). avoiding hum Under some circumstances, you might hear audible hum in your loudspeakers caused by so called ground loops. To reduce the possibility of mains hum in your system, follow these steps: 1. do not link together the ground terminals, if available, of separate audio products 2. use high quality screened interconnects, such as our F3-10-ANA for your signal connections and keep the signal cables close together If you still experience hum in your system, contact your retailer. grounding The 100x5R:10 is double-insulated and does not require a safety ground connection

Page 31

running in and warming up
TAG McLaren equipment is designed to give optimum performance for many years.

running in

Just like a high quality car, the performance of your 100x5R:10 will improve during the rst few hours of operation. After these few hours, the electronic components will have reached and settled down to near perfect specication.

warming up

Every time you switch on your 100x5R:10, its performance will improve as the components reach their optimum operating temperature.

Page 32

care and maintenance
There is a fuse in the power socket on the back of your 100x5R:10. To change the fuse, unplug the power cable and carefully pull out the fuse carrier drawer(1). The fuse carrier contains a spare fuse; this is the rst one that you see when you open the carrier. There are no other user-serviceable parts inside the 100x5R:10.

cleaning

In order to maintain the appearance of your 100x5R:10, you can clean it as follows: Before cleaning always disconnect your 100x5R:10 from the mains supply
any grease or dirt on the case may be removed with a soft, lint free cloth moistened slightly with a mild solution of warm water and detergent or washing up liquid. Do not use any other solutions. Do not use any solvents or abrasives, take great care not to get any liquid inside the case. If this happens, you should have your 100x5R:10 serviced.
1. You cannot open the fuse drawer while the plug is in the socket

Page 34

technical data
polarity (phase) input for full rated power gain rated power output non-inverting between any input and output 1.0 V rms
28.8 dB at 1 kHz 120 Watt into 8 Ohm 150 Watt into 8 Ohm 200 Watt into 4 Ohm 400 Watt into 2 Ohm (IHF tone burst) 47 kOhm > 90 dB (relative to 0 dBW) 0.2 Hz - 87 kHz

typical power output

input impedance signal to noise frequency response (-3 dB) frequency response (20 Hz - 20 kHz) total harmonic distortion + noise

0.05 dB

< 0.002% @ 1 kHz 100 Watt into 8 Ohm < 0.05% from 20 Hz to 20 kHz @ 100 Watt into 8 Ohm

Page 35

technical data Stereo module
polarity (phase) input for full rated power non-inverting between any input and output Stereo mode: Bi-Amplification mode: Channel Bridging mode 28.8 dB at 1 kHz Stereo mode (both channels driven) Bi-Amplification mode (both channels driven) 80 Watt into 8 Ohm 120 Watt into 4 Ohm 200 Watt into 2 Ohm (IHF tone burst) Channel Bridging mode 160 Watt into 8 Ohm 200 Watt into 4 Ohm 240 Watt into 2 Ohm input impedance signal to noise frequency response (-3 dB) frequency response (20 Hz - 20 kHz) total harmonic distortion + noise 47 kOhm > 90 dB (relative to 0 dBW) 0.2 Hz - 150 kHz 0.90 V rms 0.90 V rms 1.10 V rms

rated power output

(IHF tone burst)
< 0.002% @ 1 kHz 80 Watt into 8 Ohm < 0.03% from 20Hz to 20kHz @ 80 Watt into 8 Ohm

Page 36

General
operating temperature range ac supply frequency ac supply voltage 10 - 35 C
50 - 60 Hz 100 V or 110 - 120 V or 220 - 240 V the voltage is marked on the rear of the product less than 1400 Watt including feet, terminals and controls 445 mm wide, 152 mm high, 352 mm deep
power consumption dimensions
We reserve the right to alter design and specification without notice. Specification may vary for different countries.