Tascam DP-004 Manual
The DP-004 Recording Package includes a TASCAM DP-004 Pocketstudio Portable 4-Track Digital Multitrack Recorder, Alesis, M1Active 320 USB Studio Monitor Pair, Shure PG48-QTR Microphone, MS-220 Tripod Mic Stand with fixed boom, and two 10 foot instrument cables. - DP-004 Pocketstudio Portable 4-Track Digital Multitrack Recorder The TASCAM DP-004 Pocketstudio is a 4-track digital multitrack recorder based on 25 years of easy-to-use cassette Portastudios. The DP-004 Pocketstudio has been updated wi... Read more
Part Numbers: KIT-230001, KIT230001
[ Report abuse or wrong photo | Share your Tascam DP-004 photo ]
TASCAM DP 004 4 track Digital Recorder
User reviews and opinions
|swingerman||11:48am on Saturday, May 15th, 2010|
|Easy intro to recording As a complete novice, I found recording straightforward following a short perusal of the manual.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Connecting and setting the input sources
1 Connect an electric guitar to the INPUT A connector on the rear panel. 2 Set the MIC/LINE-GUITAR switch on the left side panel to GUITAR.
QSG 2Recording and mastering
Here, we will try multitrack recording. In the following example, we will use an electric guitar to record a rhythm guitar part on track 1 and a lead guitar part on track 2. Then, we will use the built-in mic to record a voice on track 3. Finally, we will
When connecting an electric-acoustic guitar with a built-in preamp or an active electric guitar, as well as when connecting an electric guitar with effect boxes between it and this unit, set the MIC/LINEGUITAR switch to MIC/LINE.
3 Press the INPUT SETTING key to open the INPUT SETTING screen.
TASCAM DP-004 15
5 Press the F4 () key to select the current input for IN B (INPUT B channel).
The IN A and IN B items are used to set the input sources for the INPUT A and INPUT B channels. At first, the input source for IN is already selected.
A (INPUT A
6. Use the DATA wheel to set the IN B input source to INT MIC B-Low INT MIC B-Mid or INT MIC B-Hi. ,. gh This sets MIC B , which is the built-in mic on the right side of the front panel as the input source for INPUT B.
4 Use the DATA wheel to change the IN to GUITAR/LINE.
16 TASCAM DP-004
open, press the MENU key to open the MENU screen.
INT.MIC B-Low, INT.MIC B-Mid, INT.MIC B-High change the sensitivity of the built-in mics. Set it according to the loudness of the subject being recorded. If you are not sure which setting to use, choose INT. MIC B-Low. If the input level is too low after adjusting it later, return to this screen and change the setting to INT. MIC B-Mid. If the input level is still too low, change this setting to INT.MIC B-High.
7 After changing the setting, press the HOME key to return to the Home Screen.
2 Use the DATA wheel to select SONG and press F4 () to open the SONG menu screen.
The MODE item on the INPUT SETTING screen is used to set the input monitoring mode. Set to STEREO, input signals from INPUT A and INPUT B channels are output separately on the L and R channels, respectively. Set to MONOx2, input signals from both INPUT A and INPUT B channels are output as a combined mono signal from both the left and right channels.
3Names and Functions of Parts
2 REPEAT key Turns the repeat playback mode on and off. (See Repeat playback on page 73.) 3 IN/OUT key Press this key to open the I/O SETTING screen to set IN and OUT points for repeat playback and track editing functions. (See Setting IN and OUT points on page 73.) The OUT point also determines the end point when mastering. 4 REC MODE key Use this key to open the RECORD MODE screen to set the record mode. Select between MULTI TRACK, BOUNCE, MASTER REC and MASTER PLAY (See Recorder modes. on page 44.)
1 POWER key and indicator Press and hold this key to turn the unit ON and OFF. (See Start-up & shutdown on page 36.) The indicator lights when the power is on.
Multitrack is the standard mode and the unit defaults to this mode every time it is turned on. Various functions do not work in other modes.
28 TASCAM DP-004
5 UN/REDO key and indicator Press this to undo the last action. Press again to redo it. (See Undoing operations (undo) on page 66.) Press this key while pressing and holding the STOP ( key to open the HISTORY screen where you can ) undo multiple steps. This indicator lights when one or more operations that have been undone can still be redone. 6 Display LCD This shows the Home Screen and various other screens. (See Display screens on page 39.) The display contrast can be changed using the PREFERENCE screen. (See Setting the contrast on page 46.) 7 INPUT SETTING key Press this key to open the INPUT SETTING screen where you can select the input source. (See Selecting the input source on page 54.) 8 INPUT A and INPUT B LEVEL knobs and OL indicators Use these knobs to adjust the input levels for INPUT A and INPUT B. (See Making the first recording on page 58.) If the input source level is too high its OL (overload) indicator lights. Moreover, even if the input level is suitable, the OL indicator might light if the LEVEL knob is turned past 2 or 3 oclock. 9 ASSIGN key Press this key to open the INPUT ASSIGN screen where you can assign the A and B input channels to tracks. An assigned channel becomes the recording signal source for its track. (See Assigning input channels on page 57.) 0 MASTER LEVEL knob Adjusts the monitoring level of the stereo output signal. This knob also adjusts the recording level when performing a bounce or mix down. q Track PAN knobs Use these knobs to adjust the panning of each track in the stereo mix. (See Stereo position (panning) on page 62.) w Track LEVEL knobs Use these knobs to adjust the playback levels of each track. (See Level and balance on page 62.) e Track REC keys and indicators Press a REC key to put a track in recording standby mode (the key flashes). Pressing the key again cancels recording standby mode. If you press the PLAY () key while holding down the RECORD () key, recording will begin on every track in recording standby mode (the REC indicator lights).
TASCAM DP-004 31
Right side panel Left side panel
j USB connector Connect the unit to a computer using the included USB cable. This allows to sharing, importing and exporting files between the unit and the computer, including backup of the song data. (See Connecting with a computer on page 92.) k DC IN 5V connector Connect a dedicated power adaptor (PS-P520, sold separately).
l MIC/LINE-GUITAR switch Set this switch to match the input signal to the INPUT A jack on the rear panel. For mic or line signals, set it to MIC/LINE. For electric guitars and basses that are connected directly, set it to GUITAR. ;
/LINE OUT connector
This stereo minijack connector can be used to connect headphones or an amplification and monitoring system to allow the stereo bus signal to be monitored. When the metronome is on, the metronome can also be heard.
z VOLUME dial Use this to adjust the volume output from the OUT connector.
32 TASCAM DP-004
c Battery compartment The batteries (four AA) that power the unit are inserted here. The SD card slot is in the back of the compartment. v SD card slot Insert the SD card into the slot.
x Battery cover
TASCAM DP-004 33
Preparing the power and SD card
Installing an SD card
An SD card is used as recording media for recording and playback. Cards that comply with SD and SDHC standards can be used. Cards should be at least 512 MB in size. A list of SD cards that have been tested with this unit can be found on the TASCAM web site (www.tascam.com). Insert the SD card into the SD card slot inside the battery compartment on the bottom of the unit.
1 Make sure the unit power is OFF. Open the battery compartment and remove the batteries if they are inside. 2 Insert the SD Card into the slot as shown in the following illustration until it clicks into place.
3 Replace the batteries if you are using them and close the cover. Ejecting the card
Push an inserted card in further to eject it.
34 TASCAM DP-004
Do not remove the card or batteries when the unit is turned on. Failure to power off properly first will cause and recordings and settings made since the last power off and song save to be lost. This data cannot be recovered.
A appears to the right side of items with submenu screens. To open the sub-menu screen, press the function key that corresponds to the displayed at the bottom of the screen. (In the MENU screen above, F4 opens the sub-menu screen.) If the currently displayed list has more items above and/or below, and/or appear at the bottom right of the screen. (In the MENU screen above, appears to show that there are more items below TRACK EDIT.) On screens where values are set, turn the DATA wheel to set values.
To return to the previous screen, press the function key that corresponds to BACK at the bottom of the screen. (In the TUNER screen above, press the F1 key to return to the previous screen.) On screens where there are multiple items with values that can be set, use the function keys that correspond to and at the bottom of the screen
TASCAM DP-004 41
to select items and turn the DATA wheel to set values. To execute the function, press the function key that corresponds to EXEC.
To continue to the next operation, press the function key that corresponds to NEXT at the bottom of the screen.
To return to the Home Screen from a menu screen immediately, press the HOME key. Always return to the Home Screen after you are finished using a menu. The example below is the SONG menu screen. To open the SONG menu select SONG from the main menu shown above and press the F4 () key.
To leave a screen accessed by a dedicated key press the function key that corresponds to EXIT.
Turn the DATA wheel to select the item that you want from the menu. In the example below, LOAD is selected. The that appears at the bottom right of the screen shows that
42 TASCAM DP-004
there are other items below the COPY item.
The names (titles) of song and files for export, for example, can be edited. In the following cases, screens where names can be edited appear.
Press the F4 () key to open the LOAD screen. In the LO screen example below, the songs saved on the AD SD card appear in a list.
When saving, creating or editing the name of a song
From the SONG menu, select SAVE, CREATE or NAME ED item and press the F4 () key (See 5-Song IT Management on page 47).
When exporting a master track as a WAV file
To return to the previous screen, press the F1 (BACK) key.
To load a song, turn the DATA wheel to select the desired song and press the F2 (EXEC) key.
Select EXPORT MASTER item from the WAVE menu and press the F4 () key (see Exporting a stereo master on page 100).
When backing up a song
The position where EXEC appears on the display depends on the screen.
Select the SONG BACKUP item from the DATA BACKUP menu and press the F4 () key to open the SONG BACKUP screen. On this screen, select a song and press the F4 (NEXT) key (see Backing-up songs on page 94).
TASCAM DP-004 43
You can edit the name as follows. Use the / keys to move the cursor (underline) position. The cursor position is where editing occurs. Turn the DATA wheel to change the characters at the cursor (underline) position. Ordinary symbols, numerals and English upper and lower case letters can be selected. To insert a blank at the cursor position while editing a song name, press the F3 (INS) key. Press it to insert an A while editing a file name. ) Press the F4 (DEL key to delete the character at the cursor position.
When finished editing, press the F2 (EXEC) key to save the new name.
This unit has four recorder modes. The ordinary mode is Multitrack mode. In this mode, this unit functions as a multitrack recorder. The other modes are Bounce, Master Rec and Master Play. These modes are for bouncing tracks, recording master tracks and playing master tracks, respectively. For more information, see Bouncing tracks on page 69 and Mastering on page 62. When the power is turned ON, the unit always starts in Multitrack mode. When in modes other than Multitrack mode, some screen operations do not function. In this Owners Manual, unless otherwise noted, the recorder mode explained is assumed to be the Multitrack mode.
44 TASCAM DP-004
Connecting with other equipment
Rear panel connections Right side panel connections
AC outlet DC plug
Connect mics to INPUT A or INPUT B
Connect guitars and basses to INPUT A
Connect keyboards to INPUT A or INPUT B
Recorder functions cannot be used when connected to a computer by USB
TASCAM DP-004 45
Left side panel connections
Setting the contrast
The LCD display contrast can be adjusted. Use the following procedures to adjust the contrast.
TASCAM DP-004 47
song before changing partitions. It then loads the last used song on that partition.
Loading a saved song
SD card with one partition Follow these procedures to load a song from the active partition.
1 With the transport stopped and the Home Screen open, press the MENU key to open the MENU screen. 2 Use the DATA wheel to select SONG and press F4 () to open the SONG menu screen.
SD card with multiple partitions
An asterisk () shows the active partition. The sizes of the partitions are shown (not available space). 4 Rotate the DATA wheel to select the partition and press F2 (EXEC). A confirmation message appears.
3 Use the DATA wheel to select LOAD and press F4 () to open the SONG LOAD screen. A list of the songs on the active partition appears with an asterisk () next to the current song.
5 Press F3 (YES) to select. The unit saves the current
48 TASCAM DP-004
4 Use the DATA wheel keys to select the song to load and press F2 (EXEC). The current song is saved, and the selected song is loaded.
Creating a new song
Follow these procedures to create a new song in the active partition
1 With the transport stopped and the Home Screen open, press the MENU key to open the MENU screen. 2 Use the DATA wheel to select SONG and press F4 () to open the SONG menu screen. 3 Use the DATA wheel to select CREATE and press F4 () to open the SONG CREATE screen.
You can rename a song later by selecting NAME EDIT from the SONG menu. You can also edit the song name when saving it.
5 Press F2 (EXEC) to save the currently loaded song and create the new song.
Saving a song
This unit automatically saves the current song during shutdown and when loading another song, for example. You can also save a song at any time using the following procedures.
1 When the transport is stopped and the Home Screen is open, press the MENU key to open the MENU screen. 2 Turn the DATA wheel to select SONG, and press the F4 () key to open the SONG menu screen. 3 Turn the DATA wheel to select SAVE, and press the F4 () key.
A default song name like SONG*** is given to the new song. The asterisks indicate a number. In the example above the name is SONG002. 4 Change the song name as necessary (see Editing names on page 43).
TASCAM DP-004 65
Undoing operations (undo)
This unit allows you to undo an operation or recording that did not work as planned or was otherwise unsatisfactory. Undo can be used on many ordinary operations, including editing and recording operations. This unit has two types of undo functions. Single undo can be used with a simple key press, while multi-undo allows you to return to and undo a specific past operation. state of the last operation. The UN/REDO indicator turns OFF.
If single undo is used when multi-undo (described below) has already been used to return the unit to a previous state, it will go one more step backward. If you press the UN/REDO key again to redo the step, the single undo operation is cancelled, and the previous multi-undo state is restored. In this case, the unit is not restored to the most recently conducted operation, so the UN/REDO indicator remains lit because further redo operations are possible.
Undoing the last operation (single undo)
Press the UN/REDO key to return to the state before the last operation was conducted. After doing this, the UN/REDO indicator lights, showing that redo (see below) is possible.
Undoing a previous operation (multi-undo)
1 Press the UN/REDO key while pressing and holding the stop () key to open the HISTORY screen.
The UN/REDO indicator lights when the unit state is not the last editing or recording operation conducted (when undo has been used).
Cancelling an undo operation (redo) This screen shows the operation history as a list.
Press the UN/REDO key when it is lit to return to the
66 TASCAM DP-004
Each operation in the list is called an event. The
event list starts at the bottom with event number 0 (-START UP- The top event is the most recent and ). has * next to it. All events that occurred after a selected event can be undone at once. This operation is called multiundo because it allows you to undo multiple events and return to an earlier state.
2 Turn the DATA wheel to select the event that you want to return to (all events after the selected event will be undone). 3 Press the F2 (EXEC) key to execute the multi-undo and restore the song state to just after the selected event was conducted. In this state, the UN/REDO indicator lights. The unit has been returned to a previous state, but the event information undone through the above operation is not erased. On the HISTORY screen, a * appears next to the current event after undoing. If you make a new recording or new edits after using multi-undo (UN/REDO indicator lit), the event history after the current event is cleared and the last operation conducted becomes the most recent event.
When the metronome is operating, you can adjust the LEVEL, but other items on the METRONOME screen cannot be changed.
4 Turn the DATA wheel to select TUNER and press the F4 () key to open the TUNER screen. The value of the Calibration item (standard frequency) is selected.
You can use the metronome like a click track to help keep time when recording the first tracks (rhythm guitar, bass, etc.) in a song. If you want to use the metronome when practicing, you can either turn the MASTER LEVEL knob all the way down during playback or play a song that does not have any recordings.
Use the built-in guitar/bass tuner to tune your instruments.
1 Connect a guitar or bass to INPUT A. INPUT B cannot be used for tuning. 2 On the INPUT SETTING screen, set the INPUT A input source to GUITAR/LINE (see Selecting the input source on page 54). 3 When the transport is stopped and the Home Screen is open, press MENU to open the MENU screen.
5 Turn the DATA wheel to set the standard frequency of the A note between 435 and 445 Hz. The default setting is 440 Hz. 6 Play a guitar or bass string. The pitch name closest to the string appears above the meters. Tune the string roughly until the sound name that you want appears. Then, fine tune the string until the rectangle at the middle of the meter darkens, showing that the string is in tune. If the pitch is too low, a bar extends to the left of the middle and if it is too high it extends to the right. The longer the bar is the more out of tune the string is. For example, in the following screen, the desired tuning is D but the string pitch is too low.
TASCAM DP-004 77
2 Select PREFERENCE and press the F4 () key to open the PREFERENCE screen.
The rectangle at the middle of the meter darkens when the string is in tune. 3 Use the F3 () and F4 () keys to select the Auto Off setting value, and turn the DATA wheel to choose from these options: OFF (initial setting, Auto Off does not occur), 3min, 5min, 10min, 30min 7 When finished tuning, press the HOME key to return to the Home Screen. 4 When finished making settings, press the HOME key to return to the Home Screen.
Turning the power off automatically
You can set the time until the power automatically turns OFF after the last use when using the batteries.
78 TASCAM DP-004
Restoring the initial preference settings
You can restore the PREFERENCE screen settings to their initial values (the values that they had when the unit was shipped from the factory). This operation is called initialization.
1 When the Home Screen is open, press the MENU key to open the MENU screen. 2 Turn the DATA wheel to select PREFERENCE, and press the F4 () key to open the PREFERENCE screen. Press F3 (YES) to initialize the unit. The PREFERENCE screen reopens when the process finishes.
4 Select the setting item value. If there are multiple setting items, use the F3 () and F4 () keys to select an item. Turn the DATA wheel to select a value. The different settings are explained in the following sections for each function. 5 Press the F2 (EXEC) key to execute the function.
The two parameters are as follows.
Press the F1 (BACK) key to return to the TRACKEDIT menu screen without executing the function.
Select the track or tracks to duplicate. The choices are 1 to 4 (single track), 1/2, 3/4 (track pairs) and MST (master stereo track). Select the track or tracks that you want to put the clone tracks on. The choices depend on the SOURCE TRK item setting.
CLONE TRACK (track duplication)
Using CLONE TRACK you can create copies of single tracks, a track pair or a master track on different tracks. This copies the entire track, so the IN and OUT points have no effect.
If you chose a single track as the SOURCE TRK, the DESTINATION TRK choices are 1 to 4 (single track). If you chose a track pair (for example, 1/2 or MASTER as ) the SOURCE TRK, the DESTINATION TRK choices are 1/2 or 3/4 (pair track). After setting the parameters, press the F2 (EXEC) key to execute the edit. Press the F1 (BACK) key to return to the TRACK EDIT menu screen without editing.
TASCAM DP-004 87
CLEAN OUT TRK
If you choose the same track for both the SOURCE TRK and the DESTINATION TRK and press the F2 (EXEC) key, the Same Track message appears and the operation is cancelled.
Select the track or tracks to erase. The choices are 1 to 4 (single track), 1 , 3/4 (track pairs) and 1 (all /tracks). After setting the parameter, press the F2 (EXEC) key to execute the edit. Press the F1 (BACK) key to return to the TRACK EDIT menu screen without editing.
CLEAN OUT (track erase)
SILENCE (part erase)
This completely erases the selected track. This erases the entire track, so the IN and OUT points have no effect. This erases the selected track between the IN and OUT points. This has the same effect as recording a silent signal between the IN and OUT points. This operation does not change the track length. There is only one parameter.
88 TASCAM DP-004
CUT (remove part)
There is only one parameter. The IN and OUT points appear on the screen, but they cannot be changed here.
Select the track or tracks that you want to silence parts of. The choices are 1 to 4 (single track), 1/2, 3/4 (track pairs) and 1 (all tracks). 4 After setting the parameter, press the F2 (EXEC) key to execute the edit. Press the F1 (BACK) key to return to the TRACK EDIT menu screen without editing.
The segment between the IN and OUT points on a selected track is CUT (erased), and the rest of the track after the OUT point is moved forward to the IN point. As a result, the length of the track becomes shorter.
This function can be used to remove short noises, for example.
TASCAM DP-004 89
Select the track or tracks that you want to silence parts of. The choices are 1 to 4 (single track), 1/2, 3/4 (track pairs), (all tracks) and ALL (tracks 1 to 4 and the master track). After setting the parameter, press the F2 (EXEC) key to execute the edit. Press the F1 (BACK) key to return to the TRACK EDIT menu screen without editing.
OPEN (insert silence)
Select the track or tracks that you want to silence parts of. The choices are 1 to 4 (single track), 1/2, 3/4 (track pairs), 1 (all tracks) and ALL (tracks 1 to and the master track). After setting the parameter, press the F2 (EXEC) key to execute the edit. Press the F1 (BACK) key to return to the TRACK EDIT menu screen without editing.
A silent passage is inserted between the IN and OUT points on a selected track. This operation splits a track at the IN point and the beginning of the part after the IN point is shifted to the OUT point. As a result, the length of the track becomes longer.
90 TASCAM DP-004
11Exchanging Data with a Computer
You can backup song data on this unit to a computer and restore backed-up song data later. Moreover, you can export track files and master files from a song to a computer and import audio files on the computer to the unit. Data transfer always occurs between the units FAT partition and a computer connected by USB to this unit, so a two-step process is necessary.
If a message appears on the computer screen saying that this unit cannot be disconnected safely, do not disconnect the USB cable. Close all the computer programs and windows that are accessing files on this unit, and then try the operation again.
Disconnecting from Macintosh systems 1 Drag the DP-004 icon that represents this unit to the Trash, or type Command-E to eject the DP-004.
Before starting a backup, check that the MTR partition that has the song that you want to backup is selected (see Selecting the active partition on page 47).
1 With the transport stopped and the Home Screen open, press the MENU key to open the MENU screen, and turn the DATA wheel to select DATA BACKUP Press. the F4 () key to open the DATA BACKUP menu.
Depending on the OS version or OS settings you might also be able to eject the DP-004 icon by clicking an eject button next to it in the Finder window or by using a control key.
2 After the icon disappears from the desktop, remove the USB cable.
94 TASCAM DP-004
4 Use the / keys, the DATA wheel and the F3 and F4 keys, to name the song (maximum of 8 characters) (see Editing names on page 43). 5 After setting the name, press the F2 (EXEC) key. 2 Use the DATA wheel to select SONG BACKUP and press , the F4 () key to open a song list. A backup copy of the song on the active partition is made on the FAT partition (.001 is added as an extension). Writing
F le i
and an icon appear on the display.
3 Turn the DATA wheel to select the song that you want to backup, and press the F4 (NEXT) key. A screen appears that allows you to set the file name for the song being backed up.
When the backup copy is complete, the DATA menu reopens.
If the open space necessary to back-up a songs is not available in the FAT partition, an error message appears. In this case, connect this unit and a computer, and erase unnecessary files on the partition using the computer to make enough open space.
6 Turn the DATA wheel to select the WAV file that you
98 TASCAM DP-004
You can export tracks as 16-bit, 44.1-kHz mono WAV files.
1 With the transport stopped and the Home Screen open, press the MENU key to open the MENU screen. Turn the DATA wheel to select WAVE, and press the F4 () key to open the WAVE menu. 2 Turn the DATA wheel to select the EXPORT TRACK item, and press the F4 () key. Song tracks that have audio recordings are displayed in a list. The file name makes the source track number clear. By checking multiple checkboxes, you can export more than one track at once. Select a track and press the F4 () key again to remove the check from its checkbox. 4 When you finish putting checks next to the tracks that you want to export, press the F2 (NEXT) key. The amount or open space on the FAT partition (which is the destination for the exported tracks) and the total number of tracks to be exported is shown.
Song tracks that do have audio recordings are not displayed in the file list.
3 Turn the DATA wheel, to select a track for export, and press the F4 () key to put a check in the checkbox.
In step 3 above, if you press the F2 (NEXT) key after selecting a track but before putting a checkmark next to any track, the selected track is exported alone.
TASCAM DP-004 99
5 Press the F4 (EXEC) key. The selected track is exported to the FAT partition with the edited file name with the.WAV extension added as the track file name. If you have previously exported a track file with the same name, a confirmation message (Duplicate name Are you sure?) appears. Press the F3 (YES) key to overwrite the older track. 6 Connect this unit to a computer (see Connecting with a computer on page 92). 7 Use the computer to copy track files from the WAVE directory on the FAT partition to the computer. 8 After exporting track files to the computer, disconnect the unit from the computer using the proper procedures and then remove the USB cable (see Disconnecting on page 93).
symbols, for example. You can import the tracks that you exported to the computer to this unit or another DP-004.
Exporting a stereo master
You can export a stereo master that you have made on the unit (see Mastering on page 62) to a computer. When you create a new stereo master for a song, the existing stereo master is overwritten, so if you want to keep multiple different stereo masters, you might want to save them to a computer. Before starting the following export procedures, make sure that the song that you want to export a stereo master for is currently loaded and that you have already created a stereo master for it.
102 TASCAM DP-004
13Specifications & Messages
Audio input/output ratings
Terminal: Standard phone jack, Unbalanced Input impedance: 10k min. (with INPUT A selectable switch set to MIC/LINE) 1M (with INPUT A selectable switch set to GUITAR) Standard input level: 10 dBV Maximum input level: +6 dBV Headroom: 16 dB
INPUT (MIC/LINE) LINE OUT: 20 Hz to 20 kHz
INPUT (LINE) LINE OUT: 0.05% max.
INPUT (MIC/LINE) LINE OUT: 81 dB min.
Terminal: Standard phone jack, Unbalanced Input impedance: 10k min. Standard input level: 10 dBV Maximum input level: +6 dBV Headroom: 16dB
SD card (512 MB - 2 GB) or SDHC card (4 GB - 32 GB)
/LINE OUT output
Terminal: 3.5 mm mini-phone jack (stereo) When line is connected Standard output level: 16 dBV Maximum output level: 0 dBV When headphone is connected Maximum output level: 15 mW + 15 mW (when 32 headphone is connected)
MTR partition: TASCAM original FAT partition: FAT32
About 8 hours (Record mode) About 8.5 hours (Music playback mode) (when measured with alkaline batteries. Battery life may vary depending on the operating conditions)
TASCAM DP-004 103
Operating temperature range
5 - 35C
Recommended USB host controller
Windows Windows 2000 SP4 or later, Windows XP and Windows Vista Macintosh Mac OS X 10.2 or later
155.0 (W) x 33.5 (H) x 107.0 (D) mm (w/o projections)
360 g (w/o batteries)
Pentium 300 MHz or faster 128 MB or more memory USB (USB 2.0 recommended)
Power PC, iMac, G3, GMHz or faster 64 MB or more memory USB port (USB 2.0 recommended)
104 TASCAM DP-004
TASCAM DP-004 105
The following popup messages alert you to conditions that may arise while you are using the unit. Consult this table if you see something you do not understand.
The DP-004 Recording Package includes a TASCAM DP-004 Pocketstudio Portable 4-Track Digital Multitrack Recorder, Alesis, M1Active 320 USB Studio Monitor Pair, Shure PG48-QTR Microphone, MS-220 Tripod Mic Stand with fixed boom, and two 10 foot instrument cables. - DP-004 Pocketstudio Portable 4-Track Digital Multitrack Recorder The TASCAM DP-004 Pocketstudio is a 4-track digital multitrack recorder based on 25 years of easy-to-use cassette Portastudios. The DP-004 Pocketstudio has been updated with 4 tracks of CD-quality digital recording. Like the classic Portastudios, a row of knobs sets levels and pan instead of a list of menus. The DP-004 can record 2 microphones at once to layer and mix tracks on the included 1GB SD Card. A built-in stereo condenser microphone makes it simple to use the TASCAM DP-004 to record anywhere you go. Or you can plug your microphones into the rear-panel inputs. Once you set levels and pan, record your mix to the dedicated stereo master track and transfer to a computer over USB 2. Despite its go-anywhere compact design, the TASCAM DP-004 Pocketstudio is simple enough for students, songwriters and anyone who wants to keep their recording process simple and creative. - Alesis M1Active 320 USB Studio Monitor Pair Alesis M1Active 320 powered monitors make a lot of sense on your studio desktop and for field recording and other traveling audio engineers. The Alesis monitors connect via USB to your laptop or computer for plug-and-play listening. These compact speakers are equipped with I/O for connecting a keyboard, mic preamp, guitar effects, mixer, and other audio components for easy computer recording. - M1Active 320 monitors deliver 16-bit/44.1-48k - Hz audio quality through a USB 1.1 port-without the need for special drivers. A Bass Boost switch increases the low-end for monitoring in big spaces. Besides the USB cable, the I/O includes quality 1/4" plugs and standard RCA jacks, a TRS headphone output, two unbalanced 1/4" phone jacks inputs, a stereo 1/8" mini-jack input, and stereo RCA inputs. Another nice benefit is that each speaker is magnetically shielded, so you won't have to worry about placing them near TVs or computers. - Shure PG48-QTR Microphone The Shure PG48-QTR Vocal Microphone comes complete with a 15', 1/4" phone cable and clip for plug and play convenience. The dynamic cartridge offers rugged, reliable performance and its cardioid pattern rejects noise and minimizes feedback. Built-in pop filter and on-off switch. Includes clip, mic pouch, and educational guide. - MS-220 Tripod Mic Stand The MS-220 Tripod Microphone Stand has a thread adapter and tubular legs. Adjustable height from floor to top thread is 35" to 61-7/8". 30-1/4" boom is not adjustable.
Handytone-286 AH215-JD C7000VP HR7744 55 MA101 L16850 CDM-9801 TCM-459V BDP-S1E 42A12D Navigator 8 HT-WS1 I F Error KH 2302 M7310 CT-F1250 21PT1664-05S RL39ebms Lightmaster XL WD-N80068 A570 IS XRC900 DC3410 TH-A25 DVD-VR335 WDA1055W Compressors HG FZR600R-1998 UE22C4010 A Mole Samsung J208 ICD-B7 IVA-D106R - 2000 32LF2510 Dvdr70-051 1120 Y KX-TG1100SP GR-SXM740u-gr-sxm740 220 CDI Humminbird 535 Magicolor 2 MC-804A Premier 412 FX-400twin Coolpix 3100 Philips 107B P-300 ACC-30 7510A HM25E Radio 135001 Review Dslr-A200K Dongle Wifi Pulse Viewty Digital Pocketstudio Latitude D630 Adapter Vclick FAX-phone B640 VS3151R SGH-P520 CDX-CA600X DSC-TX5 PSR-100 DTB-S500fcard 854 ZD MF4150 HK301 CDX-757MX Tubefire 8 IC-726 RMV201 210 BT Power Supply TH-50PHD7 Voip0801B 82000 PX660 GT-S7070 KX-TG1100NL OMS-7E Tutorial RM6505 Forum Recording Package Temperature 16 Ultragliss Biberones DM3050 TS-930S Studio Plus Pola Plus On Time UE-40C8700XS IC-305 KLV-32U2530 HBH-GV435 DHC-MD333 Xterra-2000 LG-C320 Sigma TS-H552D PS42A450 Motorola I576
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101