LA-80 & LA-81

PRODUCT OVERVIEW

LA-80 - Unbalanced to Balanced Line Converter / Distribution Amp

Technical Documentation

LA-81 - Balanced to Unbalanced Line Converter / Distribution Amp
TASCAM's LA-80 and LA-81 line level converter boxes were built for studio quality conversion between balanced and unbalanced line levels, offering the best integration of all types of equipment. Fine tuning trim pots are accessed on the front panel, offering 6dB adjustment on individual outputs. Ground lift controls are available on each channel or globally for eliminating ground loops. On the bottom of the LA-80 is a channel link matrix that allows channels to be linked, utilizing the Line Amp as a distribution amplifier. This is great for splitting signals for distribution to multiple recorders, or for multizone sound routing applications.
Converts between Balanced and Unbalanced Line Levels Distribution Amp Function with Channel Uplink (LA-80 Only) 6dB Fine Tuning Trim Pots On Each Output Ground Lift Switches Per Output or Global Cascade 500W Power Outlet (US/Canada Model Only) Single Space Rack Mount Design Selectable +4/-20dBm Balanced Nominal Level

APPLICATIONS

The LA-80 and LA-81 are designed to offer top quality line level conversion and audio distribution capabilities for studios, live installations, and mobile production systems. Restaurants - Retail Stores - Live Theaters In situations where a common audio source needs to be split into multiple signals, the LA series splitters are incredibly useful. In theaters, the audio from the main PA system could be split and sent to separate amps so patrons can still hear the show in the lobby or restrooms. In retail outlets and restaurants, the same source can be sent to separate systems feeding the entrance, restaurant, bar, restrooms, and office individually. The LA-80 is especially helpful in many low budget installations where the audio source is starting out as unbalanced, but the amplifiers may not be located directly near the audio equipment. The LA-80 not only splits the unbalanced signal, but also converts it to balanced for better performance over longer cable runs. Personal, Project and Production Studios When studios need to integrate a combination of balanced and unbalanced equipment, the LA-80 and LA-81 offer the best quality line level conversion. Also, it works in 8 channel banks, conveniently matching up with multitrack and mixer fader blocks.

SPECIFICATIONS

Performance Specifications: Frequency Response: 20Hz-20kHz, 0.8dB Signal to Noise Ratio: 87dB (IHF A/DIN) Total Harmonic Distortion: <0.01% @ 1kHz Crosstalk: 90dB @ 1kHz Trim Range: 6dB LA-80 Electronics: Input (Unbalanced RCA x8): Maximum Input Level: Output (Balanced XLR x8): Maximum Output Level: LA-80 Electronics: Input (Balanced XLR x8): Maximum Input Level:
-10dBV, 34kOhms (Input Links Off) +11dBV (3.5V), output set to +4dBm +35dBV (56V), output set to -20dBm +4dBm (1.23V), output set to +4dBm -20dBm (0.0775V), output set to -20dBm +25dBm (13.8V)
+4dBm (1.23V), input set to +4dBm -20dBm (0.0775V), input set to -20dBm +32dBm (30.8V), input set to +4dBm +8dBm (1.9V), input set to -20dBm Output (Unbalanced RCA x8): -10dBV, 10kOhms (1kOhm minimum) Maximum Output Level: +18dBV (7.9V) General Specifications: Power Requirements:
Power Consumption: Dimensions: Weight:
120V AC, 60 (US/Canada Model) 230V AC, 50Hz (Europe Model) 240V AC, 50Hz (Australia) 8W (LA-80); 6W (LA-81) 482 x 48 x 196 mm 19" x 1-7/8" x 7-11/16" 2.8Kg, 6.171 lbs

7733 Telegraph Road

Montebello, CA 90640

(323) 726-0303

http://www.tascam.com

Page 1 of 2

LA-80-81_TECHDOC.pdf 032900
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
LA-80 & LA-81 Technical Documentation LA-80 CHANNEL INPUT LINK FUNCTION
LA-80 ONLY: On the bottom of the LA-80, you will find a small matrix of switches for balanced output level and channel input link. The input link groups the output of the given channel with the previous channel. This function allows the LA-80 to operate as a distribution amp, not just a level converter. Each channel has its own switch, so the grouping is completely flexible. You can take one input to eight channels for simple distribution of a single mono source. You could make 4 splits of a stereo input. You could even make two copies of one signal, three of another, and have the remaining three inputs simply used as a line level amp. This kind of flexibility lends itself to a number of installed sound applications, especially where a simple unbalanced stereo output may need to be sent to several different amplifiers for multiple zones.

INPUT LINK

ON OFF +4 -20 +4

ON OFF +4 -20

ON OFF +4

OUTPUT LEVEL

Bottom panel drawing above. Schematic of input link at left.
ARCHITECT'S SPECIFICATIONS
LA-80: The line level converter shall be an eight channel balanced amplifier, converting unbalanced signals to a balanced levels. Inputs shall be provided on 8 RCA connectors; outputs shall be provided on 8 XLR connectors. Each channel shall have a fine trim control offering a range of 6dB on the front panel. On the bottom panel, a switch shall be provided for each channel offering +4dBm/-20dBm nominal balanced output level adjustment. On the back panel, a ground lift switch shall be provided for each channel; an overall ground lift switch shall also be present. The line level converter shall also have an audio distribution amp function, allowing the individual linking of each channel (2-7) to the previous channel for flexible linking. The line level converter shall be able to mount in a standard 19" rack mount, taking one space in height. Dimensions shall be 19" x 1-7/8" x 7-11/16" (W x H x D).
Metric measurements: 482x48x196mm
LA-81: The line level converter shall be an eight channel balanced to unbalanced level converter. Inputs shall be provided on 8 XLR connectors; outputs shall be provided on 8 RCA connectors. Each channel shall have a fine trim control offering a range of 6dB on the front panel. On the bottom panel, a switch shall be provided for each channel offering +4dBm/-20dBm nominal balanced input level adjustment. On the back panel, a ground lift switch shall be provided for each channel; an overall ground lift switch shall also be present. The line level converter shall be able to mount in a standard 19" rack mount, taking one space in height. Dimensions shall be 19" x 1-7/8" x 7-11/16" (W x H x D).

The line level converter/distribution amp shall be a TASCAM LA-81.
NOTE: This text is available in a standard text file on TASCAM's Sound Contractor CD-ROM. Contact TASCAM for details.
The line level converter/distribution amp shall be a TASCAM LA-80.

Page 2 of 2

D01047820C

LA-80@#/81@#

OWNER'S MANUAL
Unbalanced/Balanced Line Converter
E_LA-80-81mkII_RevC.indd 1

08.12.19 1:07:22 PM

IMPORTANT SAFETY PRECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This appliance has a se rial numbe r located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
For the customers in Europe WARNING This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Pour les utilisateurs en Europe AVERTISSEMENT I l s'a g i t d 'u n p r o d u i t d e C l a s s e A. D a n s u n environnement domestique, cet appareil peut provoquer des interfrences radio, dans ce cas l'utilisateur peut tre amen prendre des mesures appropries. Fr Kunden in Europa Warnung Dies ist eine Einrichtung, welche die Funk-Entstrung nach Klasse A besitzt. Diese Einrichtung kann im Wohnbereich Funkstrungen versursachen ; in diesem Fall kann vom Betrieber verlang werden, angemessene Manahmen durchzufhren und dafr aufzukommen.

For U.S.A.

TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user's authority to operate this equipment.
CE Marking Information a) Applicable electromagnetic environment: E4 b) Peak inrush current: 4.2 A
In North America use only on 120V supply.

2 TASCAM

LA-80/81MKII
E_LA-80-81mkII_RevC.indd 2

08.12.19 1:07:23 PM

IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions. Do not expose this apparatus to drips or splashes. Do not place any objects filled with liquids, such as vases, on the apparatus. Do not install this apparatus in a confined space such as a book case or similar unit. The apparatus draws nominal non-operating power from the AC outlet with its POWER or STANDBY/ON switch not in the ON position. The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time. The main plug is used as the disconnect device, the disconnect device shall remain readily operable. An apparatus with Class I construction shall be connected to an AC outlet with a protective grounding connection. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Excessive sound pressure from earphones and headphones can cause hearing loss.
8 Do not install ne a r any he at source s such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. T he wide blade or the third prong a re provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched par ticularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

TASCAM LA-80/81MKII

E_LA-80-81mkII_RevC.indd 3

Contents

1Introduction.. 5 Overview... 5 Supplied accessories.. 5 Precautions for placement and use.. 5 Cleaning the unit.. 5 Rack-mounting the unit.. 5 2Names and Functions of Parts.. 6 Front panel (LA-80MKII).. 6 Rear panel (LA-80MKII).. 6 Front panel (LA-81MKII).. 7 Rear panel (LA-81MKII)... 7 Bottom panel (LA-80MKII).. 8 Bottom panel (LA-81MKII). 8 Block diagram (LA-80MKII).. 9 Level diagram (LA-80MKII).. 9 Block diagram (LA-81MKII).. 10 Level diagram (LA-81MKII).. 10 3ADA Functions.. 11 LA-80MKII ADA Functions.. 11
Example 1 (LA-80MKII).. 11 Example 2 (LA-80MKII).. 11
LA-81MKII ADA Functions.. 12
Example 1 (LA-81MKII).. 12 Example 2 (LA-81MKII).. 12
4Specifications.. 13 Inputs and Outputs.. 13 Performance... 13 Other specifications.. 14 Dimensional drawings.. 14

4 TASCAM

E_LA-80-81mkII_RevC.indd 4

1Introduction

Thank you very much for purchasing a TASCAM LA-80/81MKII. Please read this Owners Manual carefully and understand how to operate the device correctly before use. We hope that you will fully use the features of this unit for many years to come. After reading this manual, please keep it in a convenient place for future reference.

Overview

The LA-80MKII has 8 internal circuits to convert unbalanced inputs to balanced outputs. In addition, the Audio Distributed Amplifier (ADA) function allows single inputs to be assigned to multiple outputs using the INPUT LINK switches between each channel. The LA-81MKII has 8 internal circuits to convert balanced inputs to unbalanced outputs. Moreover, LA-80/81MKII units also have the following functions. for the entire unit Each channel has an INPUT/OUTPUT LEVEL switch that allows input and output levels to be switched between -20 dBu and +4 dBu Level indicator LEDs that show signal presence Semi-fixed TRIM controls for fine level adjustment of 12 dB Rack mount brackets Three-prong AC power outlet (Not on EUR model)
GND LIFT switches to turn the ground ON and OFF for each balanced connector ALL LIFT switch that turns the ground ON and OFF

Supplied accessories

The following items are included with this product. Main unit...1 Power cord set...1 Rack mount screw set..1 Owners Manual (this document)..1 Warranty card..1 Contact your TASCAM supplier if any of these items are missing.
Precautions for placement and use
Use this unit within its operating temperature range of 540 C (40104 F). In addition, please avoid placement in locations that are very dusty or humid because this could cause malfunction. Do not give the unit a violent shock. This could cause damage to the internal circuitry or the case.
Please be aware that, as a result of improvements or other changes to the product, photographs, illustrations and other depictions in the Owners Manual may differ from the actual product.

Cleaning the unit

Use a soft cloth to wipe the unit clean. Do not clean it with chemical-based wipes, benzene, thinner, alcohol or similar substances. This could damage the surface or cause the color to change.

Rack-mounting the unit

Use the supplied rack-mounting kit to mount the unit in a standard 19-inch rack, as shown below. Remove the feet of the unit before mounting.
Leave 1U of space above the unit for ventilation. Allow at least 10 cm (4 in) at the rear of the unit for ventilation.
E_LA-80-81mkII_RevC.indd 5
2Names and Functions of Parts

Front panel (LA-80MKII)

1 POWER switch and LED Turns power ON and OFF. 2 LED indicators Indicate the presence of input signals.
3 TRIM (UNBALANCED TO BALANCED) 18 These semi-fixed trim controls allow output signal levels to be adjusted in a range of 12 dB.

Rear panel (LA-80MKII)

4 INPUTS 18 RCA pin jack type input connectors with nominal input levels of -10 dBV (0.3 V). 5 OUTPUTS 18 XLR type output connectors with nominal output levels of +4 dBu (1.23 V) or -20 dBu (0.0775 V). 6 GND LIFT switches In a studio or other place where multiple units are connected, a ground loop can occur through the wiring, and this loop can cause a hum or other noise. If this occurs, engage GND LIFT switches to cut ground loops from the (balanced) OUTPUTS 5.
8 Level indicator LED switch If this switch is ON, LEDs light when input signals are present. If this switch is OFF, the LEDs do not light regardless of the presence of input signals. 9 GND connector When multiple pieces of equipment are connected, use this to make the chassis of each piece of equipment have the same electrical potential. 0 Power outlet (see NOTE below) Use this three-prong outlet, which is not affected by the power switch, to connect AC equipment with a maximum power consumption of 400 W (or 3A). This connector is convenient when using multiple LA-80/81MKII units. The specifications are displayed on the top of the unit.

The GND LIFT switches do not cut the ground for the INPUTS 4.
7 ALL LIFT switch When other equipment is mounted in the same metal rack, for example, a ground loop can occur through the panel or chassis, and this loop can cause a hum or other noise. If this occurs, engage the ALL LIFT switch to cut the loop.
The EUR model does not have this power outlet, so the panel here is blank.
q AC IN connector Connect the included power cord.

6 TASCAM

E_LA-80-81mkII_RevC.indd 6

08.12.19 1:07:24 PM

Front panel (LA-81MKII)
3 TRIM (BALANCED TO UNBALANCED) 18 These semi-fixed trim controls allow output signal levels to be adjusted in a range of 12 dB.

Rear panel (LA-81MKII)

4 OUTPUTS 18 RCA pin jack type output connectors with nominal output levels of -10 dBV (0.3 V). 5 INPUTS 18 XLR type input connectors with nominal input levels of +4 dBu (1.23 V) or -20 dBu (0.0775 V). 6 GND LIFT switches In a studio or other place where multiple units are connected, a ground loop can occur through the wiring, and this loop can cause a hum or other noise. If this occurs, engage GND LIFT switches to cut ground loops from the (balanced) INPUTS 5.
8 Level indicator LED switch If this switch is ON, LEDs light when input signals are present. If this switch is OFF, the LEDs do not light regardless of the presence of input signals. 9 GND connector When multiple pieces of equipment are connected, use this to make the chassis of each piece of equipment have the same electrical potential 0 Power outlet (see NOTE below) Use this three-prong outlet, which is not affected by the power switch, to connect AC equipment with a maximum power consumption of 400 W (or 3A). This connector is convenient when using multiple LA-80/81MKII units. The specifications are displayed on the top of the unit.
The GND LIFT switches do not cut the ground for the OUTPUTS 4.
E_LA-80-81mkII_RevC.indd 7

08.12.19 1:07:25 PM

Bottom panel (LA-80MKII)
w OUTPUT LEVEL switches 18 Switches that set whether the signal levels output from the OUTPUTS 5 are +4 dBu (1.23 V) or -20 dBu (0.0775 V). This setting can be made for each channel independently.

e INPUT LINK switches 28 These switches allow an input signal to be routed to any higher numbered output. Two or more inputs can also be assigned to multiple outputs in sequence (see 3ADA Functions for examples.)

Bottom panel (LA-81MKII)

w INPUT LEVEL switches 18 Switches that set whether the signal levels input to the INPUTS 5 are +4 dBu (1.23 V) or -20 dBu (0.0775 V). This setting can be made for each channel independently.

8 TASCAM

E_LA-80-81mkII_RevC.indd 8
Block diagram (LA-80MKII)

UNBALANCED TO BALANCED

XLR OUT

RCA JACK

AMP with TRIM function

LEVEL SHIFT

OUTPUT LEVEL -20dBu

BALANCED AMP

NC3FAH1 J2 1

AGND RCA JACK

INPUT LINK

VR1 +4dBu -20dBu

R729 47k

+4dBu GND LIFT AGND SW

3 GND LIFT SGND

AGND AGND AGND

Level diagram (LA-80MKII)
LEVEL +15dB +10dB +5dB 0dB -5dB -10dB -15dB -20dB -25dB -20dBu -10dBV -9dBV (-26.2dB) -7dBu -9dBu +4dBV (-2.2dB) +4dBu +17dBV +17dBu

0dBu=0.775V

-30dB -35dB -40dB -45dB -50dB

0dBV=1V

-33dBu
E_LA-80-81mkII_RevC.indd 9

08.12.19 1:07:26 PM

Block diagram (LA-81MKII)

BALANCED TO UNBALANCED

XLR IN BALANCED AMP with TRIM function +

NC3FAH1 J102 1

BALANCED INPUT CIRCUIT

GAIN SWITCH AMP U805B

7 +4dBu

VR GND LIFT

SW 20dBu AGND

LIFT AGND

SW GND
Level diagram (LA-81MKII)
LEVEL +15dB +10dB +5dB 0dB -5dB -10dB -15dB -20dB -25dB -30dB -35dB -40dB -45dB -50dB -31.8dBu -20dBu +21.9dBu (-7.1dB) -29dBu -16dBu -18dBu (+24dB) +4dBu +2.1dBu (-7.1dB) -5dBu (-2.8dB) -10dBV

0dBu=0.775V 0dBV=1V

-42dBu

10 TASCAM

E_LA-80-81mkII_RevC.indd 10

3ADA Functions

LA-80MKII ADA Functions
By using the LA-80MKII INPUT LINK switches e, the signals input from single connectors can be routed to other channels and output as desired.

Example 1 (LA-80MKII)

In this example, the signal input through channel 1 is routed to channels 18.
1 Input a signal through the (unbalanced) INPUT 1 4. 2 Turn INPUT LINK switches 28 e ON. 3 The signal input through channel 1 is output through (balanced) OUTPUTS 18 5.

Example 2 (LA-80MKII)

In this example, a stereo pair of signals input through channels 1 and 5 are output in parallel to 4 channels each.
1 Connect the left stereo signal to the (unbalanced) INPUT and connect the right stereo signal to the (unbalanced) INPUT 5 4.

Input signal (L) 1

2 Turn INPUT LINK switches 24 and 68 e ON. 3 The left stereo signal input to channel 1 is output through (balanced) OUTPUTS 14 5, and the right stereo signal input to channel 5 is output through (balanced) OUTPUTS 58 5.

Outputs

2 (L) 3

Input signal (R)

6 (R) 7
E_LA-80-81mkII_RevC.indd 11

08.12.19 1:07:27 PM

LA-81MKII ADA Functions
By using the LA-81MKII INPUT LINK switches e, the signals input from single connectors can be routed to other channels and output as desired.

Example 1 (LA-81MKII)

1 Input a signal through the (balanced) INPUT 1 5. 2 Turn INPUT LINK switches 28 e ON. 3 The signal input through channel 1 is output through (unbalanced) OUTPUTS 18 4.

Example 2 (LA-81MKII)

1 Connect the left stereo signal to the (balanced) INPUT and the right stereo signal to the (balanced) INPUT 5 5. 2 Turn INPUT LINK switches 24 and 68 e ON. 3 The left stereo signal input to channel 1 is output through the (unbalanced) OUTPUTS 14 4, and the right stereo signal input to channel 5 is output through the (unbalanced) OUTPUTS 58 4.

Input signal (L)

12 TASCAM
E_LA-80-81mkII_RevC.indd 12

4Specifications

Inputs and Outputs
UNBALANCED TO BALANCED (LA-80MKII) Inputs (8 unbalanced RCA pin jacks) Input impedance Nominal input level Maximum input level Indicator detection level (unbalanced input) Outputs (8 balanced XLR type connectors) Output impedance Nominal load impedance Minimum load impedance Nominal output level Maximum output level BALANCED TO UNBALANCED (LA-81MKII) Inputs (8 balanced XLR type connectors) Input impedance Nominal input level Maximum input level Indicator detection level (balanced input) Outputs (8 unbalanced RCA pin jacks) Output impedance Nominal load impedance Minimum load impedance Nominal output level Maximum output level
23 k (when all INPUT LINK switches are OFF) 2.8 k (when all INPUT LINK switches are ON) -10 dBV 1 dB +4.8 dBV 38 dBV or more (OUTPUT LEVEL switch set to +4 dB or 20 dB) (Connector holes: 1 = ground, 2 = hot, 3 = cold) 94 10k 600 +4 dBu 1 dB (OUTPUT LEVEL switch set to +4 dB) -20 dBu 1 dB (OUTPUT LEVEL switch set to -20 dB) +23 dBu

(Connector holes: 1 = ground, 2 = hot, 3 = cold) 54 k (when all INPUT LINK switches are OFF) 6.7 k (when all INPUT LINK switches are ON) +4 dBu 1 dB (INPUT LEVEL switch set to +4 dB) -20 dBu 1 dB (INPUT LEVEL switch set to -20 dB) +30 dBu (INPUT LEVEL switch set to +4 dB) +8 dBu (INPUT LEVEL switch set to -20 dB) 24 dBu or more (INPUT LEVEL switch set to +4 dB) 48 dBu or more (INPUT LEVEL switch set to -20 dB) k 1 k -10 dBV 1 dB +18 dBV

Performance

TRIM range S/N ratio (nominal input and output level) 12 dB A-weighting filter + 20 kHz LPF: 90 dB LA-80MKII (OUTPUT LEVEL switch set to +4 dB) LA-81MKII (INPUT LEVEL switch set to +4 dB) 20 Hz HPF + 20 kHz LPF: 87 dB LA-80MKII (OUTPUT LEVEL switch set to +4 dB) LA-81MKII (INPUT LEVEL switch set to +4 dB) 0.007% or less 20 Hz100 kHz 3 dB -90 dB or more (1kHz, nominal input and output level, terminated with a 600 load)
Total harmonic distortion (1 kHz, nominal input and output level) Frequency response (nominal input and output level) Crosstalk
E_LA-80-81mkII_RevC.indd 13

Other specifications

Power: Power consumption: Weight: External dimensions (WxHxD): 100-240 V~, 50/60 Hz 6W 3 kg (main unit) 482 x 44 x 280 mm
In order to improve these units, their specifications and external appearance may be changed without notification. Please be aware that, as a result of product improvements, illustrations and other depictions in the Owners Manual may differ in part from the actual product.

Dimensional drawings

9mm 9mm 6mm 280mm 432.6mm

432.2mm 482.6mm

14 TASCAM
E_LA-80-81mkII_RevC.indd 14

31.8mm

08.12.19 1:07:28 PM
E_LA-80-81mkII_RevC.indd 15

TEAC CORPORATION

Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan

www.tascam.jp

TEAC AMERICA, INC.
Phone: +1-323-726-Telegraph Road, Montebello, California 90640 USA

www.tascam.com

TEAC CANADA LTD.
Phone: +1905-890-8008 Facsimile: +1905-890-Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada
TEAC MEXICO, S.A. de C.V.
Phone: +52-55-5010-6000 Ro Churubusco 364, Colonia Del Carmen, Delegacin Coyoacn, CP 04100, Mxico DF, Mxico

www.teacmexico.net

TEAC UK LIMITED
www.tascam.co.uk Phone: +44-8451-302511 Suites 19 & 20, Building 6, Croxley Green Business Park, Hatters Lane, Watford, Hertfordshire, WD18 8TE, UK

TEAC EUROPE GmbH

Phone: +49-611-71580 Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

www.tascam.de

Printed in China
E_LA-80-81mkII_RevC.indd 16