HH80-110000D Engine Parts List #1

Page 1 of 9

HH80-110000D Engine Parts List #1 Ref # 9 9A 9A 14A 14A 14A 14A 23A 25A 25A 35 Part Number 32007C 34523 32620B 32001C 32002B 32003B 32619B 31919 33093A 31939 32580A 31956A 31963

Page 2 of 9

Qty Description Cylinder (Incl.2,4,30,47,119) (3-5/16 ") Pin, Dowel Seal, Oil Intake Valve (Std.) Intake Valve (1/32" OS) (Incl. 9) Exhaust Valve (Std.) Exhaust Valve (1/32" OS) (Incl. 9) Key, Flywheel Spring, Valve Cap, Lower valve spring (1/32" OS) Cap, Lower valve spring (Std.) Cap, Lower valve spring (Std.) Cap, Lower valve spring (1/32" OS) Pin, Valve spring retainer Crankshaft (Incl. 12, 13, 17, 78 & 79 ) Pin, Crankshaft gear Gear, Crankshaft Piston, Pin & Ring Set (Std.) (3-5/16 " Bore) Piston, Pin & Ring Set (.010" OS) Piston, Pin & Ring Set (.020" OS) Piston, Pin & Ring Set (.030" OS) Piston, Pin & Ring Set (.040" OS) Piston & Pin Ass'y. (.040" OS) (Incl. 16) Piston & Pin Ass'y. (Std.)(Incl.16)(3 -5/16") Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Piston & Pin Ass'y. (.030" OS) (Incl. 16) Ring Set (Std.) (3-5/16" Bore) Ring Set (.010" OS) Ring Set (.020" OS) Ring Set (.030" OS) Ring Set (.040" OS) Re-Ringing Set, Piston Ring, Piston pin retaining Connecting Rod Ass'y.(Std.)(Incl.18, 19 & 20) Connecting Rod Assy.(.010" US)(Incl.1 8,19,20) Connecting Rod Assy.(.020" US)(Incl.1 8,19,20) Bolt, Connecting rod Washer, Connecting rod Nut Assy., Lock Camshaft (MCR) Lifter, Valve Cover, Cylinder (Incl. 4, 28, 30, 34, & 43) * Gasket, Cylinder cover * Gasket, Oil fill "O" Ring Dipstick (Incl. 25A) Spacer, Governor rod Screw, 1/4-20 x 2" Oil Drain Plug Link, Governor Screw, 1/4-20 x 1" Clamp, Governor lever Ring, Retaining Lever, Governor adjusting
HH80-110000D Engine Parts List #1 Ref # 69 70B Part Number 30590A 31930 32000A 33034 650694A 650711 650628A 650695A 650714 650697A 410144B 650760

Page 3 of 9

Qty Description Lockwasher Screw, 10-24 x 7/8" Nut, 10-24 Plate, Governor spring Screw, 10-32 x 1/2" Spring, Governor Washer, Flat Rod Assy., Governor Spool, Governor Ring, Retaining Gear Assy., Governor Shaft, Mechanical Governor * Gasket, Cylinder head Head, Cylinder Screw, 5/16-18 x 2" (Use as required) Screw, 5/16-18 x 1-5/8" (Use as requi red) Screw, 5/16-18 x 2-3/8" (Use as requi red) Screw, 5/16-18 x 2-1/4" (Use as requi red) Screw, 5/16-18 x 1-5/8" (Use as requi red) Screw, 5/16-18 x 2-1/2" (Use as requi red) Screw, 5/16-18 x 1-3/4" (Use as requi red) Screw, 5/16-18 x 5/8" (Use as require d) Resistor Spark Plug (RJ-8C) Resistor Spark Plug (RJ-17LM) Cover, Cylinder head Washer, Plain Washer, Flat (Use as required) Washer, Belleville (Use as required) Washer, Lock (Use as required) Screw, 10-24 x 1/2" Extension, Blower housing Bracket, Fuel tank Fuel Cap (White Plastic)(Std.)(As req uired) Fuel Cap (Red Plastic) (Spurt resistant, High profile) (Use as required) Strap, Fuel tank Screw, 1/4-20 x 1" Nut, Flange whiz-lock, 1/4-20 Screw, 1/4-20 x 27/32" (Use as requir ed) Screw, 1/4-20 x 5/8" (Use as required ) Screw, 1/4-20 x 1/2" (Use as required ) Screw, 5/16-18 x 7/8" (Use as require d) Washer, Flat Lockwasher Strainer & Shut-off, Fuel Clamp, Fuel line (Use as required) Fuel Line (Braided) (8.25") (Use as r equired) Fuel Line (Braided) (16") (Use as req uired) Fuel Line (Braided) (32") (Use as req uired) Fuel Line (Braided) (48") (Use as req uired) Baffle, Blower housing Screw, 1/4-20 x 5/8" Terminal Grommet, Plastic Screw, 8-32 x 3/8"
HH80-110000D Engine Parts List #1 Ref # 80 Part Number 32031

Page 4 of 9

Qty Description Bearing, Tapered roller Cup, Bearing Spacer, Steel (.010" thick) NOTE: Determine the gap between the cover and the machined surface on the cylinder which can be from.001"up to.007" in which case no shim gaskets will be required. Use of gasket must be limited to a combined total of.010" thick. Steel spacersmust be used as required * Gasket, Shim (.004/.005 thick) NOTE: Determine the gap between the cover and the machined surface on the cylinder which can be from.001"up to.007" in which case no shim gaskets will be required. Use of gasket must be limited to a combined total of.010" thick. Steel spacersmust be used as req "O" Ring * Gasket, Shim (.005/.007 thick) NOTE: Determine the gap between the cover and the machined surface on the cylinder which can be from.001"up to.007" in which case no shim gaskets will be required. Use of gasket must be limited to a combined total of.010" thick. Steel spacersmust be used as req Cover, Cylinder NOTE: Determine the gap between the cover and the machined surface on the cylinder which can be from.001"up to.007" in which case no shim gaskets will be required. Use of gasket must be limited to a combined total of.010" thick. Steel spacersmust be used as required to eliminat Screw, 10-32 x 1" Lockwasher, 5/16" (Use as required) Washer, Lock Nut, Flywheel, 3/4-16 Blower Housing Washer, Lock Screw, 5/16-24 x 3/8" Switch, Stop Washer, Shakeproof Washer, Flat Screw, 5/16-24 x 9/16" * Gasket, Breather Breather Assy. Tube, Breather Screw, 10-24 x 1/2" Washer, Wave Bushing, Control lever Lever, Control Screw, 10-24 x 5/8" Screw, 10-24 x 2" Spring Nipple, Exhaust pipe Muffler Plug, Button (Use as required) Nut & Lockwasher Assy. Stud, Carburetor

81 31971

82A 31972

83 32677

84 84A 113 114
31966 31984A 29752 650587
HH80-110000D Engine Parts List #1 Ref # 121 122E 122D 123 125A 141 141A 299B 299B 299B 299 299A Part Number 32255A 631328A

Page 5 of 9

Qty Description * Gasket, Air cleaner Screw, 10-32 x 5/8" Spacer, Air cleaner Bracket, Air cleaner Bracket, Air cleaner Element, Air cleaner Cover, Air cleaner Nut, Wing Screw, 5/16-18 x 5/8" (Use as require d) Screw, 5/16-18 x 3/4" (Use as require d) Screw, 5/16-18 x 7/8" (Use as require d) Washer, Flat (Use as required) Lockwasher, Split (Use as required) * Gasket, Carburetor Baffle, Air Trigger Pin Kit (Use as required) Cover, Spark plug (Use as required) Spacer, Screen Washer, 1/4 plain (Use as required) Washer, Lock 1/4 E.T. (Use as require d) Washer, Flat 1/4 (Use as required) Clip, Conduit Screw, 10-32 x 3/8" Screw, 5/16-18 x 5/8" Washer, Flat Screen, Starter pulley Pulley, Starter Screw, 1/4-20 x 1-1/2" Rope Assy., Starter (Use as required) Grommet, Lead wire Flywheel Decal, Craftsman Decal, Name Decal, Solid State Decal, Instruction Decal, Air cleaner Valve, Seat, Spring & Gasket Assy. Carburetor (Incl. 145) (Refer to Division 5, Section A, page 94 for breakdown) * Gasket Set (Incl. items marked *)

304 33237A

HH80-110000D Engine Parts List #2

Page 6 of 9

HH80-110000D Engine Parts List #2 Ref # Part Number 650781 34276

Page 7 of 9

Qty Description Washer, Lock 1/4 E.T. (Use as require d) Washer, Flat 1/4 (Use as required) Screw, 8-18 x 7/16" (Use as required) Screw, 5/16-18 x 7/8" (Use w/32817 st r.motor) Screw,5/16-18 x 11/16"(Use w/33835 st r.motor) Plate, Cover (Use as required to cover regulator mounting hole in blower housing) Screw, 10-16 x 3/8" (Use as required) Rewind Starter Kit (Incl. 165, 166, 167, 168, 169 & 291) (Use as required) Harness Assy., Adapter (Use as requir ed) Flat Connector (Female terminals) (As req.) Solid State Magneto Screw, 1/4-20 x 5/8" Screw, 5/16-18 x 1-1/4" Solid State Transformer Ass'y.(Incl.1 73,266) Screw, 1/4-20 x 5/8" Grommet, Lead wire Starter Switch Kit(Incl. 287-298) (As req.) Ground Wire (Incl. 75)
253 257B 260A 261 261A 30831
HH80-110000D Engine Parts List #3

Page 8 of 9

HH80-110000D Engine Parts List #3 Ref # 41 62A Part Number 27793 28942

Page 9 of 9

Qty Description Spring, Governor Fuel Tank (Incl. 63) Fitting, Fuel line Clamp, Fuel line (Use as required) Fuel Line (Braided) (8.25") (Use as r equired) Fuel Line (Braided) (16") (Use as req uired) Fuel Line (Braided) (32") (Use as req uired) Fuel Line (Braided) (48") (Use as req uired) Pipe Plug, 1/8-27 (Use as required) Plug, Pipe, 1/8-27 (Use as required) Clip, Conduit Screw, 10-32 x 3/8"