HHM80-190014D Engine Parts List #1

Page 1 of 10

HHM80-190014D Engine Parts List #1 Ref # 15 15A 15B 37A 120 Part Number 34809A 27652 30699C 34554 34329A 34330A 34331A 32591C 650662C 34143 33273A 33626B 31845 30590A 30591 30588A 35187 34041A 34030A

Page 2 of 10

Qty Description Cylinder (Incl. 2,20,72)(3-1/8")(CI l iner) Pin, Dowel Rod Assy., Governor (Incl. 15A & 15B) Yoke, Governor Screw, 6-40 x 5/16" Governor Lever Assy. Clamp, Governor lever Screw, 8-32 x 5/16" Seal, Oil Baffle, Blower housing Screw, 1/4-20 x 5/8" Crankshaft (Incl. 108 & 109) Screw, 10-32 x 3/4" Lockwasher, # 8 E.T. Nut & Lockwasher, 10-32 Locknut, 8-32 Ring, Retaining Piston, Pin & Ring Set (Std.) (3-1/8" Bore) Piston, Pin & Ring Set (.010" OS) Piston, Pin & Ring Set (.020" OS) Piston & Pin Ass'y. (3-1/8")(Std.)(In cl. 43) Piston & Pin Ass'y. (.010" OS) (Incl. 43) Piston & Pin Ass'y. (.020" OS) (Incl. 43) Ring Set (Std.) (3-1/8" Bore) Ring Set (.010" OS) Ring Set (.020" OS) Ring, Piston pin retaining Rod Assy., Connecting (Incl. 49) Bolt, Connecting rod (2 pieces) Lifter, Valve Dipper, Oil Camshaft (MCR) Extension, Blower housing Screw, 10-24 x 1/2" * Gasket, Cylinder cover Cyl.Cover(Incl.71,74,75,80,175,176,31 1,312) Plug, Oil drain Seal, Oil Shaft, Mechanical governor Washer, Flat Gear Assy., Governor (Incl. 81) Spool, Governor Ring, Retaining Screw, 1/4-20 x 1-1/4" Screw, 1/4-20 x 1-3/4" Key, Flywheel Flywheel Washer, Belleville Hex Nut, 1/2-20 Lamination Assy., Solid State Stud, Lamination mounting Screw, Torx T-15, 10-24 x 1" Ground Wire * Gasket, Head Head, Cylinder
HHM80-190014D Engine Parts List #1 Ref # 129 130A 130 131A 149 149A 173A 185 186A 286B 298 Part Number 27878A 27880A 650727 6021A 650694A 32581 27896A 30088A 650378 27915A 35043 34833B 650788 29747B 33272B 33280A 650665

Page 3 of 10

Qty Description Exhaust Valve (Std.) (Incl. 151) Exhaust Valve (1/32" OS) (Incl. 151) Intake Valve (Std.) (Incl. 151) Intake Valve (1/32" OS) (Incl. 151) Washer (Use as req., but not w/6021A screw) Washer, Belleville Screw, 5/16-18 x 1-3/4" (Use as requi red) Screw, 5/16-18 x 1-1/2" (Use as req.,but not w/650691 washer) Screw, 5/16-18 x 2" (Use as required) Screw, 5/16-18 x 5/8" (Use as require d) Bracket, Governor gear Screw, 10-24 x 1/2" Cap, Upper valve spring Cap, Upper valve spring Spring, Valve Cap, Lower valve spring * Gasket, Breather cover Body, Breather Element, Breather Cover, Valve spring Grommet, Breather tube Tube, Breather Screw, 10-24 x 1/2" Nut & Lockwasher, 1/4-28 Clip, Primer line Screw, 1/4-28 x 1" * Gasket, Carburetor Pipe, Intake Link, Governor Control Bracket (Incl. 203, 204, 206 & 209) Spring, Compression Screw, 5-40 x 7/16" Terminal Assy. (Use as required) Link, Governor-to-throttle Screw, 10-32 x 1/2" Knob, Control Screw, Torx T-30, 5/16-18 x 1-1/8" * Gasket, Intake pipe Tube, Carburetor Blower Housing (For electric starter) Screw, 5/16-18 x 3/4" Screw, 5/16-24 x 21/32" Cover, Cylinder head Muffler Plate, Muffler locking Screw, 5/16-18 x 3-3/16" Cover, Starter bubble Screw, 8-32 x 3/8" Cup, Starter Hub & Screen Assy. Fuel Line (Braided 16") (41 cm) Clamp, Fuel line Screw, 1/4-15 x 7/8"

HHM80-190014D Engine Parts List #1 Ref # Part Number 300 34156A

Page 4 of 10

Qty Description Fuel Tank (Incl. 292 & 301) NOTE: These tanks were builtwith different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Fuel Cap Tube, Oil fill "O" Ring Clip, Fill tube Dipstick Clip, Ground wire (Use as required) Clip, Fuel line (Use as required) Terminal Assy. Wire Harness (6-3/4") (7 Amp) Plate, Fuel tank mounting Screw, 1/4-20 x 5/8" Decal, Instruction Decal, Instruction Decal, Instruction Can be used on HM80 with diecast starter. Decal, Instruction Can be used on HM80 with stamped steel recoil starter. Decal, Air cleaner Decal, Throttle Decal, Name Inlet Needle, Seat & Clip Assy. Carburetor (Incl. 184) (Refer to Division 5, Section A, page A3-14 for breakdown or Fiche 18A-2, Grid F-7) Rope & Handle, Starter Gasket Set (Incl. items marked*) Fill Tube & Dipstick Assy. (Incl. 306 & 308) SAE 30, 4-Cycle Engine Oil (Quart) SAE 5W30, 4-Cycle Engine Oil (Quart)

325B 370J

35274 34870
370B 34387 370B 370F 370A 590343 33279G 730226
HHM80-190014D Engine Parts List #2

Page 5 of 10

HHM80-190014D Engine Parts List #2 Ref # 222A 227 Part Number 34809A 35187 27896A 33878 730127

Page 6 of 10

Qty Description Cylinder (Incl. 2,20,72)(3-1/8")(CI l iner) Pin, Dowel Plug, Oil drain Ground Wire * Gasket, Breather cover Body, Breather Element, Breather Cover, Valve spring Tube, Breather Screw, 10-24 x 1/2" Nut & Lockwasher, 1/4-28 Link, Governor-to-throttle Pop Rivet (1/8" dia.) (Purchase local ly) Air Cleaner Ass'y. (Incl. 238, 239, 240, 241, 243, 245 & 370)(Use as required) Air Cleaner Ass'y. (Incl. 238, 239, 240, 241, 243 & 245) (Use as required) Air Cl.Elbow (Incl.222A,228,235,239A & 242A) Stud, 1/4-20 x 7.33 (Use as required) Stud, 1/4-20 x 8.1 (Use as required)(Used with drilled thru elbow) Nut & Lockwasher, 1/4-20 Nut, 1/4-20 (Used with drilled thru e lbow) Fitting, Breather Screw, 10-32 x 7/8" * Gasket, Air cleaner A/C Bracket (Used with drilled thru e lbow) Bracket, Air cleaner Screw, 10-32 x 1/2" Element, Air cleaner Filter, Pre-air Cover, Air cleaner Nut, Wing, 1/4-20 Muffler Plate, Muffler locking Screw, 5/16-18 x 3-3/16" Clamp, Fuel line Tube, Oil fill "O" Ring Decal, Throttle Decal, Instruction Can be used on HM80 with diecast starter. Decal, Instruction Can be used on HM80 with stamped steel recoil starter. Decal, Air cleaner Carburetor (Incl. 184) (Refer to Division 5, Section A, page A3-14 for breakdown or Fiche 18A-2, Grid F-7)

227A 241A 242A 243 245A 246A 250A 306 370F 370J 27272A 650513 33280A 34870

370B 34387 370B 632325

HHM80-190014D Engine Parts List #3

Page 7 of 10

HHM80-190014D Engine Parts List #3 Ref # 37A 130A 131A 301 341C 370J Part Number 35262 33626B 33245 6021A 33280A 34870

Page 8 of 10

Qty Description Governor Lever Assy. Clamp, Governor lever Screw, 8-32 x 5/16" Bearing, Ball Crankshaft (Incl. 108 & 109) Washer, Thrust Washer, Thrust Screw, 10-32 x 3/4" Lockwasher, # 8 E.T. Nut & Lockwasher, 10-32 Locknut, 8-32 Ring, Retaining * Gasket, Cylinder cover Cyl.Cover(Incl.71,74,75,80,175,176,31 1,312) Retainer, Bearing Seal, Oil Screw, 1/4-20 x 1-1/4" Screw, 1/4-20 x 1-3/4" Key, Flywheel Pin, Crankshaft gear Gear, Crankshaft Screw, 5/16-18 x 1-1/2" (Use as req.,but not w/650691 washer) Screw, 5/16-18 x 5/8" (Use as require d) Screw, 1/4-20 x 5/8" (Use as required ) Screw, 1/4-20 x 5/8 (Use as required) Lockwasher Nut, Lock, 10-24 Gasket, Exhaust (Use as required) Muffler Screw, 5/16-18 x 3-3/16" Screw, 1/4-15 x 7/8" Fuel Cap Bracket, Fuel tank mounting Decal, Instruction Can be used on HM80 with diecast starter. Exh.Adaptor Kit (Incl.274,277)(As req uired)

415 730130

HHM80-190014D Engine Parts List #4

Page 9 of 10

HHM80-190014D Engine Parts List #4 Ref # 103 275C 277A 370B Part Number 650561 34387

Page 10 of 10

Qty Description Screw, Torx T-15, 10-24 x 1" Muffler (Optional quiet muffler) Screw, 5/16-18 x 2-3/4" (Used with 27 6A) Fuel Cap Screw, 1/4-20 x 5/8" Decal, Instruction Can be used on HM80 with stamped steel recoil starter. Decal, Air cleaner Decal, Instruction Can be used on HM80 with diecast starter. Seal, Screen (Can be used on HM80 with stamped steel recoil starter.) Spacer, Screen Debris Screen Kit (Incl. 327, 370B, 408, 409, 411 & 413) Screen, Debris Screw, 5/16-18 x 1-5/8" (Can be used on HM80 with stamped steel recoil starter) Exh.Adaptor Kit (Incl.274,277)(As req uired) Starter Muff Kit (Incl. 370J, 426 & 4 27) Air cleaner, Starter Starter Air Cleaner Bracket (Optional ) Screw, 8-18 x 1-1/8" (3 Required) Alternator, Add on Centering tube (Use with engines equipped with diecast aluminum starter) Centering tube A.C. Lighting Connector D.C. Charging Connector Alternator Shaft (4.00") (Use with engines equipped with diecast aluminum starter) Alternator Shaft (Use with engines equipped with stamped steel starter) (Use as required) (Refer to Mechanic's Handbook for installation instructions).

HHM80-190018E Engine Parts List #1

Page 1 of 10

HHM80-190018E Engine Parts List #1 Ref # 15B 15 15A 30 32A Part Number 34809A 30699C 34329A 34330A 34331A 32591C 650662C 34143 33273A 33626B 30590A 30591 30588A Qty 2 Description Cylinder (Incl. 2, 20 & 72) Dowel Pin Screw, 6-40 x 5/16" Governor Rod (Incl. 15A & 15B) Governor Yoke Governor Lever Governor Lever Clamp Screw, 8-32 x 5/16" Speed Control Spring Oil Seal Blower Housing Baffle Screw, 1/4-20 x 5/8" Lock Nut, 8-32 Crankshaft Washer Screw, 10-32 x 3/4" Lock Washer Lock Nut, 10-32 Retaining Ring Piston, Pin & Ring Set (Std.) Piston, Pin & Ring Set (.010" OS) Piston, Pin & Ring Set (.020" OS) Piston & Pin Ass'y. (Std.) (Incl. 43) Piston & Pin Ass'y. (.010" OS) (Incl. 43) Piston & Pin Ass'y. (.020" OS) (Incl. 43) Ring Set (Std.) Ring Set (.010" OS) Ring Set (.020" OS) Piston Pin Retaining Ring Connecting Rod Ass'y. (Incl. 46 & 49) Connecting Rod Bolt Valve Lifter Oil Dipper Camshaft (MCR) Blower Housing Extension Screw, 10-24 x 1/2" * Cylinder Cover Gasket Cylinder Cover (Incl. 74,75,80,175 & 176) Crankshaft Bushing Oil Drain Plug Oil Seal Governor Shaft Washer Governor Gear Ass'y. (Incl. 81) Governor Spool Retaining Ring Screw, 1/4-20 x 1-1/4" Screw, 1/4-20 x 1-3/4" Flywheel Key Flywheel Belleville Washer Flywheel Nut Solid State Ignition Spark Plug Cover Solid State Mounting Stud

Page 2 of 10

HHM80-190018E Engine Parts List #1 Ref # 130 130B 130A 173A 264A Part Number 34041A 34030A 27878A 27880A 650694A 27896A 30088A 650378 27915A 35043 xxxxx 34833B 650788 29747B 650802 33272B 34185A Qty 1

Page 3 of 10

Description Screw, Torx T-15, 10-24 x 1" Ground Wire * Cylinder Head Gasket Cylinder Head Exhaust Valve (Std.) (Incl. 151) Exhaust Valve (1/32" OS) (Incl. 151) Intake Valve (Std.) (Incl. 151) Intake Valve (1/32" OS) (Incl. 151) Washer Belleville Washer Screw, 5/16-18 x 2" Screw, 5/16-18 x 5/8" Screw, 5/16-18 x 1-3/4" Resistor Spark Plug (RJ17LM) Governor Gear Bracket Screw, 10-24 x 1/2" Valve Spring Cap Valve Spring Valve Spring Keeper * Valve Cover Gasket Breather Body Breather Element Valve Cover Breather Tube Grommet Breather Tube Screw, 10-24 x 1/2" Nut & Lock Washer, 1/4-28 Retainer Clip Screw, 1/4-28 x 1" * Carburetor To Intake Pipe Gasket Intake Pipe Governor Link Control Bracket (Incl. 19, 203 & 204) Compression Spring Screw, 5-40 x 7/16" Terminal Throttle Link Screw, 10-32 x 1/2" Control Knob Screw, Torx T-30, 5/16-18 x 1-1/8" Intake Pipe Gasket Carburetor Tube # Pop Rivet (1/8") (Can be purchased locally) Air Cleaner Bracket Air Cleaner Cover Blower Housing Screw, 5/16-18 x 3/4" Screw, Torx T-40, 5/16-24 x 21/32" Screw, 1/4-20 x 5/8" Cylinder Head Cover Muffler Locking Plate Screw, 5/16-18 x 3-3/16" Starter Bubble Cover Screw, 8-32 x 3/8"
HHM80-190018E Engine Parts List #1 Ref # 342 370B 370A 370D 370 370C 400 Part Number 34156A 590343 33279G Qty 1

Page 4 of 10

Description Starter Cup Fuel Line Fuel Line Clamp Screw, 1/4-15 x 3/4" Fuel Tank (Incl. 292 & 301) Fuel Cap Oil Fill Tube "O" Ring Fill Tube Clip Dipstick Fuel Tank Bracket Fuel Tank Bracket Screw, 1/4-20 x 5/8" Instruction Decal Name Decal Throttle Decal Instruction Decal Instruction Decal Carburetor (Incl. 184) Starter Rope * Gasket Set (Incl. items marked PK i n notes) Incl. part #'s 26756 (1), 27272A (2), 27896A (2), 27915A (1), 29673 (1), 33263 (1), 33629 (1), 34041A (1), 34327A (1), 34698A (1), 34912 (1), 34923A (1), 35262 (1), 35317 (1), 35865 (1)

420 730225

1 SAE 30 4-Cycle Engine Oil (Quart)
HHM80-190018E Engine Parts List #2

Page 5 of 10

HHM80-190018E Engine Parts List #2 Ref # 32A 130B 239A 242 242A 245 245A 264A 307 370B 370C 380 Part Number 34809A 650713 27896A xxxxx 650163 27272A 34698A 650802 34185A 632325 Qty 1 1

Page 6 of 10

Description Cylinder (Incl. 2, 20 & 72) Dowel Pin Speed Control Spring Lock Nut, 8-32 Washer Oil Drain Plug Ground Wire Screw, 5/16-18 x 5/8" * Valve Cover Gasket Breather Body Breather Element Valve Cover Breather Tube Screw, 10-24 x 1/2" Nut & Lock Washer, 1/4-28 Throttle Link A/C Elbow (Incl. items marked with # sign) # Stud, 1/4-20 x 8.1" # Nut & Lock Washer, 1/4-20 # Pop Rivet (1/8") (Can be purchased locally) Nut, 1/4-20 Air Cleaner Elbow Fitting Screw, 10-32 x 7/8" Air Cleaner Gasket # Air Cleaner Gasket Air Cleaner Bracket # Air Cleaner Base Air Cleaner Filter Air Cleaner Filter Air Cleaner Cover Wing Nut, 1/4-20 Screw, 1/4-20 x 5/8" Muffler Locking Plate Screw, 5/16-18 x 3-3/16" Fuel Line Fuel Line Clamp Oil Fill Tube "O" Ring Instruction Decal Instruction Decal Carburetor (Incl. 184)

HHM80-190018E Engine Parts List #3

Page 7 of 10

HHM80-190018E Engine Parts List #3 Ref # 32A 109 130A 130B 250 264A Part Number 33626B 650580 xxxxx 650802 34185A 650729 34279B 35499 Qty 1 1

Page 8 of 10

Description Governor Lever Governor Lever Clamp Screw, 8-32 x 5/16" Speed Control Spring Ball Bearing Lock Nut, 8-32 Crankshaft Washer Washer Screw, 10-32 x 3/4" Lock Washer Lock Nut, 10-32 Retaining Ring * Cylinder Cover Gasket Cylinder Cover (Incl. 74,75,80,175 & 176) Bearing Retainer Oil Seal Screw, 1/4-20 x 1-1/4" Screw, 1/4-20 x 1-3/4" Flywheel Key Crankshaft Pin Crankshaft Gear Screw, 5/16-18 x 1-3/4" Screw, 5/16-18 x 5/8" Lock Washer Lock Nut, 10-24 # Pop Rivet (1/8") (Can be purchased locally) Air Cleaner Bracket Air Cleaner Cover Screw, 1/4-20 x 5/8" Muffler Screw, 5/16-18 x 3-3/16" Fuel Filter (Incl. 292) Screw, 1/4-15 x 3/4" Fuel Cap "O" Ring
HHM80-190018E Engine Parts List #4

Page 9 of 10

HHM80-190018E Engine Parts List #4 Ref # 32A 103 130B 250 264A 342 370B Part Number 650713 xxxxx 34704 Qty 1

Page 10 of 10

Description Speed Control Spring Lock Nut, 8-32 Washer Screw, Torx T-15, 10-24 x 1" Screw, 5/16-18 x 5/8" # Pop Rivet (1/8") (Can be purchased locally) Air Cleaner Bracket Air Cleaner Cover Screw, 1/4-20 x 5/8" Fuel Cap "O" Ring Screw, 1/4-20 x 5/8" Instruction Decal