ELECTRICAL / IGNITION COILS / MODULES

440-401 O.E.M

B&S# 697037 B&S# 397358 B&S# 395491

John Deere PT10998

Briggs Ignition Coil Fits most 2 thru 4 Hp engines with breaker point ignitions. Models 60100 thru 60497, 81500 thru 81997, 82500 thru 85902, 92500 thru 95500 & 110900 thru 113900. (For electronic ignition module, use our 440-409)
Briggs Electronic Module Replaces both older and newer style modules. Fits 5 Hp vertical and horizontal engines with electronic ignitions - except for Quantum engines. Fits models 130200 thru 132200, 133200, 133700, 135200 and 135700.

460-030

B&S# 298316

440-433

B&S# 802574
Briggs Ignition Coil Fits most 5 Hp engines with breaker point ignitions. Models 100200, 100900 and 130200 thru 132900. (For electronic ignition, use our 440-401)
Briggs Electronic Module Fits Quantum and Europa engines. Models 96700 (2-cycle), 96900, 99700, 12A800 - 12W800 and 121600 - 129800.

460-006

B&S# 293366 B&S# 298968 B&S# 299366

John Deere AM35759

440-417
B&S# 398811 B&S# 395492 B&S# 398265

John Deere PT15339

Briggs Ignition Coil Fits most 7 thru 16 Hp engines with breaker point ignitions. Models 144200 thru 147707, 170400 thru 253400 & 300400 thru 326400. (For electronic ignition, use our 440-417)
Briggs Electronic Module Fits 7 thru 16 Hp vertical and horizontal single cylinder engines with electronic ignitions. Fits models 176432, 192400, 196400, 197400, 19E400, 19G400, 226400 and 250400.
NOTE: Use our 440-441 after code# 80090600

440-441 460-022

B&S# 290880
B&S# 492341 B&S# 491312 B&S# 490586
Briggs Ignition Coil Fits models 9, 14, 19, 23, 23A and 191400 thru 231400.

440-409

B&S# 697036 B&S# 398593 B&S# 496914

John Deere PT11047

Briggs Electronic Module Replaces both older and newer Fits 10 thru 13 Hp L-head engine and Vanguard models 9 Hp, 12-1/2 Hp and 14 Hp. Fits models 286702, 286707, 28B702, 28B707 and 28C707.

Honda Ignition Coil / Module (LEFT SIDE). Fits GX610, GX610K1 / U1, GX620, GX620K1 / U1, GX670, GX670 / U, GXV610, GXV610K1, GXV620, GXV620K1 / U1, GXV670 and GXV670 / U.

440-352 NEW

Honda 30500 ZJHonda 30500 ZJHonda 30500 ZJHonda 30500 ZJ1 845
Honda Ignition Coil / Module Fits GX110, GX120, GX140, GX160 and GX200 series. Includes our 135-065 spark plug cap.
Note: Similar to our 440-340 but with a longer high tension lead.
Honda Ignition Coil / Module (RIGHT SIDE). Fits GX610, GX610K1 / U1, GX620, GX620K1 / U1, GX670, GX670 / U, GXV610, GXV610K1, GXV620, GXV620K1 / U1, GXV670 and GXV670 / U.

440-500 O.E.M

Kawasaki# 21171-7013 Kawasaki# 21171-7034

460-048 O.E.M

Kohler# 231281 Tecumseh# 32080
Ignition Coil / Module Kawasaki. Note: This is a GENUINE KAWASAKI COIL. For models FH500V, FH541V, FH580V, FH601V, FH641V, FH680V, FH721V, FH601D, FH641D, FH680D, FH721D and FJ180V.
Kohler Ignition Coil Fits model K91, K141, K181, K241, K301, K321, K341 and K361 engines. For 4, 6, 8, 10, 12 and 14 Hp engines

440-518 440-501

Kawasaki# 21121-2008 John Deere# AM101065
Kohler# 24-584-36-S Kohler# 24-584-15-S Kohler# 24-584-11-S Kohler# 24-584-03
Kawasaki Ignition Coil For models FC400V-AS00, 01, 02, FC420V-AS03, 04, 05, 06, 07, 08, 09, BS01, 02, 09, FB460V-AS01, 05, 17, 18, 27, 28, 29,30, 31, 32, 33, 36, BS01, 05, 11, 17, 18, 19, 20, 22, 23, 24, 26, 28, 29, 32, 33, CS01, 12, 14, 16, 20, DS01, 1 2, 14, 20, ES01, 03, 07, 08, 14, FS01, 03, 07, 08, 14, GS01, 03, 07, 14, HS01, 04, 14, JS01, 05, KS01, LS01
Kohler Ignition Coil Fits Command series engine models CH20, CH22, CH25, CV22, CV25, CH22S, CH25S and CV22S. For 20 Hp thru 25 Hp model engines.
Note: There are two different types of ignition modules for these Kohler models. THIS ONE HAS TWO PRONGS. One goes to the advance and one goes to the switch. The other ignition module replaces Kohler# 24-584-01S and 24-584-45S ONLY and has only the one terminal. Our part# 440-527.

440-502

Kawasaki# 21121-2083 John Deere# AM120732

440-519

Kawasaki Ignition Coil For models FD440, FD501V, FD590V, FD611V, FD620D.
Kohler# 52-584-01 Kohler# 52-584-02S

440-503

Kawasaki# 21121-2086 John Deere #AM121820

Kawasaki Ignition Coil For models FC401V, FC420V-GS01, HS01, FB460V.
Kohler Ignition Coil Fits models M18 thru M20; MV16 thru MV20. For 18 Hp thru 20 Hp engines.

440-520

Kohler# 12-584-04 Kohler# 12-584-04-S

440-517

Kawasaki# 21171-2092 Kawasaki# 21171-2193 Kawasaki# 21130-2056 Kohler Ignition Coil Command series, vertical crankshaft Fits models CH11S, CH12.5S, CH13S, CH14S, CV12.5S, CV13S,CV14S, CV15S, CV15ST, CV460S, CV490S & 495
Kawasaki Ignition Coil Fits Kawasaki model TD40, TD43 and Td48, also ts Kaaz 32cc & 33cc engines.

440-521 460-071

Kohler# 220435 Phelon# FG-02145
Kohler# 12-584-02 Kohler# 12-584-05 Kohler# 12-584-05-S
Kohler Coil Fits model K91 For 4 Hp engines.
Kohler Ignition Coil Fits models: CH11 thru CH15 and CV11 thru CV15.

440-522 O.E.M

Kohler# 47-584-01 Kohler# 47-584-02 Kohler# 47-584-03-S

460-097

Lawn Boy# 678539
Kohler Ignition Coil Fits models M10 thru M16.
Ignition Coil Fits older D series engines with breaker point ignitions. Note: Armature not included coil only as shown. You will need to re-use your old armature

440-523

Kohler# 12-584-14 Kohler# 12-584-14S
Kohler Ignition Coil (15 Amp) Fits models: CH16 and CV16.

440-527 NEW

Kohler# 2458401S Kohler# 2458404S Kohler# 2458445 Kohler# 2458445S
Red Mini-tron Fits Twin cylinder Outboard motors (using one module per cylinder). Not for engines with battery generator ywheels. Also ts single cylinder outboards with throttle connected ignition timing. For outboards with xed ignition timing refer to our 440-007 module. Note: This part is ideal if you have a leaky seal effecting your breaker points. For more information see our PDF catalogue, under Electrical Ignition - page 24-03

440-040

Ignition Coil for Kohler Fits models: CH18 thru CH23, CH730 and CV18 thru CV25, CV624, CV675, SV710, SV725, SV730, SV740 and SV820S. THIS ONE HAS ONE PRONG ONLY. Replaces Kohler# 24-584-01S and 24-584-45S
ONLY. For the (2) prong style see our part# 440-518.
Lawn Boy# 682340 Lawn Boy# 681578
Lawn Boy Solid State Module Fits models from 1978 thru 1982 (older F series) - grounded to run, - white in colour. Measures: 3-1/4 L X 2-1/2 W X 1-5/8 HT

440-528 NEW

Kohler# 14-584-05 Kohler# 14-584-05S

440-073

Lawn Boy# 683080 Lawn Boy# 683215 Lawn Boy# 682702 Lawn BoY# 1002948 John Deere# PT7176
Ignition Coil for Kohler Fits model: COURAGE XT.7

460-055

Lawn Boy# 582396 Lawn Boy# 580184 Lawn Boy# 582463 OMC# 582995 / 582931 OMC# 582370 / 580416 OMC# 580197 / 580118
Lawn Boy Solid State Module Replaces both older and newer style modules. Fits models from 1983 and newer (newer F series). Open to run, replaces gray or dark green in colour. Measures: 3-1/4 L X 2-1/2 W X 1-5/8 HT

Size:.793 L X.243 W X.145 -.212 tapered HT (Sold in multiples of 10)

445-023

Clinton# 148-4

445-080

Toro# 81-1320 Toro# 81-2370

Clinton Flywheel Keys

Toro Flywheel Key Fits model GTS. Size: 3/8 L X 1/8 thick
(While Quantities Last) (Sold in multiples of 10)
Banta ELECTRICAL / IGNITION POINTS & CONDENSERS POINTS & CONDENSERS

450-007 O.E.M

B&S# 294628

455-162

Clinton 13524 Clinton 13524000 John Deere AM30949 Phelon 071130 Phelon FG06225 Phelon FG1316 Tecumseh 30548B
Briggs Ignition Set Fits 2 thru 8 Hp engines. Models 60100, 60500, 80500, 81500 and 195400.

450-015

B&S# 29667 B&S# 29861
Clinton Condenser Fits many makes
Briggs Ignition Set Fits models I, N, U, W, 5, 6, 6F, 6R, 6S, 8 and 140000.

450-171

Kohler# 266240 Gravely# 12979 Wisconsin# W2437 A-2437A / 10412437

450-114

B&S# 29667 Wico# X15022 Kohler Breaker Points Fits 4 thru 16 Hp engines with magneto ignition. (While Quantities Last)
Briggs Breaker Points Fits models I, N, U, W, 5, 6, 6F, 6R, 6S, 8 and 140000.

450-288

450-148

B&S# 298185

Kohler# 240611 Gravely# 13996 (points) Gravely# 34907 (only) Wisconsin# X6942 / X5996
Briggs Breaker Points Fits 8 thru 16 Hp cast- iron engines Models 19D, 23D, 193400, 200400, 233400, 243400, 300400, 301430, 302430, 320420, 325430 and 326430.

Kohler Breaker Points

455-014
B&S# 291369 Wico# X15032

450-403

Briggs Condenser Fits models 9, 14, 19, 23, 23A and 191400 thru 231400. (Use with our 450-122 breaker points)
Clinton 1355500 Gravely 15435 John Deere AM31026 John Deere AM35000 Kohler 220980 Kohler 4715001 Kohler 4715003 Tecumseh 32011A Wico WX13260 Wico WX15241

455-022

B&S# 298060
Briggs Condenser Fits 8 thru 16 Hp cast-iron engines. Models 19D, 23D, 193400, 200400, 233400, 243400, 300400, 301430, 302430, 320420, 325430 and 326430. (Use with our 450-148 breaker points)
Kohler Breaker Points Models K91 thru K361. For 6 thru 20 Hp engines with battery ignition. (For breaker points less bracket, order our 450-029)

450-130

B&S# 65704 B&S# 65704S

440-015

455-105

Tecumseh# 610467 Jacobsen# 315804 Phelon# FG-2642B
Tecumseh# 27948 Tecumseh# 30547A Lombard# 7-1120 McCulloch# 80433 / 88806 Remington# 60623 Phelon# FG1835B FG03560 / 02197-00B

455-121

Tecumseh# 610588 Lombard# 7-1153 Phelon# FG-4016B Wright# 603502
Tecumseh Breaker Points Fits 3 thru 10 Hp engines. Models H, HH40 thru 70, HM70 thru 100, HS, LAV, TNT, V, VH and VM series. (Use with our 455-162 condenser)
Tecumseh Condenser Fits models 1401J, 1577, 15060, 1534D, 1581A, 1574B and 1576B
Banta ELECTRICAL / IGNITION POINTS & CONDENSERS REGULATORS continued

455-089 O.E.M

Tecumseh# 610331 Clinton# 135-241-500 Phelon# FG-1355

435-042

B&S# 691185 B&S# 394890 B&S# 393374

450-296

Wisconsin# YD314A Wico# 145088 Onan# 160-1154
Briggs Voltage Regulator For 18 - 20 Hp engines with 10, 13, 14 and 16 AMP charging systems. Fits models 192400, 196400, 226400, 28M700, 280700 and 351700.

435-046

Wisconsin Breaker Points Fits models S8 & TR10D.

B&S# 397809

450-320

Wisconsin# YQ-11

Briggs Voltage Regulator For 8 amp quad circuit charging system. (Used on 422700 series engines).

435-047

Wisconsin Breaker Points
B&S# 794360 B&S# 691188 B&S# 491546
Wisconsin# W2437 Wisconsin# A-2437A Wisconsin# 10412437 Gravely# 12979 Kohler# 266240
Briggs Voltage Regulator For 5 & 9 amp charging systems. Fits models 256400, 280700, 28B700, 28M700 thru 28Q700, 351400, 351447, 351700, 351777 and 42A700 series engines. (1) yellow & (1) red lead

435-048

B&S# 493219

450-163

Wisconsin# 31B-2437A
Briggs Voltage Regulator For 16 amp dual output charging systems. (With no charge indicator light), 8 thru 20 Hp engines. (Used on 303700 series engines).

435-085

B&S# 390240

455-501

Wisconsin# YQ-11 Wico# X12944 Wico# Wx15254 FWM-2308
Wisconsin Condenser Fits model S-7

REGULATORS

435-040
B&S# 295924 Cub Cadet# 545130-R93 Delco# 1118988 Gravely# 007275 Jacobsen# 107927 John Deere# AM30078 Tecumseh# 32089
Briggs Voltage Regulator For 10 amp charging systems. 12 volt negative; Terminals 3 in a row. Fits B&S model: 325437 and Tecumseh models: H70, HH80, HH100, HH120, HM80, OH160, V70, VH100 and VM80.

435-010

Grasshopper# 185530 Kubota# 15531-64603
Briggs Voltage Regulator For starter generators. Fits models 140201, 140202, 140232, 141202, 141231, 141251, 141252, 243431 and 243432.

Grasshopper and Kubota Voltage Regulator Fits Grasshopper models 1822D, 718D, 721D and 721G. Used on lawn & garden, compact tractors and small industrial equipment with permanent magnet alternators with a no charge indicator light.
ELECTRICAL / IGNITION REGULATORS continued REGULATORS

435-009 O.E.M

Honda# 31600-890-951
Gravely 011979 / John Deere AM102596 Kohler 234279 / 4140308 / 4140308S Phelon FG4720 / Tecumseh 610749
Honda Voltage Regulator For Honda Lawn Tractors

435-013

Kawasaki# 21066-2056 John Deere# M70121
Kawasaki & John Deere Voltage Regulator Fits Kawasaki models FB460, FC400, FC420 and FC540. For 13, 15 and 17 amp charging system up to 18 Hp engines. Also ts John Deere models 130, 160, 165, 170, 172, 175, 176, 180, 185, 186, 240, 242, 245, 265, 285, 320, 325, 345, F510, F525, F710 and F725. Fits ATM models 600, 622 and 626. Fits Gator 4X2 and 6X4 models with 15 amp charging systems.
Voltage Regulator. Fits Kohler and Tecumseh. Fits Kohler K series engines, 8 thru 12 Hp single cylinder engines. For Tecumseh models: H70, HH80, HH100, HH120, HM80, OH160, V70, VH100 and VM80 etc. For 10 amp charging systems; 12 volt negative. 3 terminals in a row.

435-001

Kawasaki# 21066-7001 21066-7003

435-081

Kawasaki Voltage Regulator Fits Kawasaki models: FH381V, FH451V, FH500V and FH531V. 14 Volt, 15 Amp Size: 3-1/4 overall length X 1-5/16 wide.
Kohler 2575503 / 4140301 / 4140303 Kohler 4140303S / 4140304 / 4140305 Kohler 4140309 / 4140309S / 4140310 Kohler 4140310S Gravely 032492 / 21465500 John Deere AM106357 / AM34738

435-004

Kawasaki# 21066-2070 John Deere# M97348
Kohler Voltage Regulator Fits models KT-17 thru 19, M8 thru MV20 and quiet series. For 15 amp charging systems.
Kawasaki & John Deere Voltage Regulator For 20 and 22 Hp water cooled V-twins. Also ts the following John Deere applications: models 425, 445 and F911, Gator 6X4 models with 20 amp charging systems.

435-084

Kohler 237335 Kohler 4140306 John Deere AM33845 John Deere AM37200

435-014

Kawasaki# 21066-2071 John Deere# AM109462
Kawasaki Voltage Regulator Fits on commercial walk behind mowers with Kawasaki engines with electric clutch, rope start and no battery. 1 (2-pin) connector and 1 (4-pin) connector
Kohler Voltage Regulator For 8 thru 24 Hp engines with 15 amp alternators. Fits models K181, K241, K301, K321, K482, K532 and K582. L pattern with (2) terminals. Uses system S series K181 thru K582, 10 - 16 Hp single cylinder. Also ts John Deere. Terminals: (1) B+ at top with (2) AC terminals side by side. Same L pattern as our 435-083 regulator below

Solenoid Grounded through pole not base - 4 pole style - 12 volt - 1/4-20 studs - Includes new spade converters

O.E.M Applications

AYP# 146154 / 24285 / 3367R AYP# 44429 / 138406X / 2008J AYP# 21261 / 677A880 / 145673 Ariens# 35510 Bolens# 1752137 /1753539 Case# C-26525 / C-33025 Gilson# 212655 Grasshopper# 184251 Gravely# 45071 Husqvarna# 61-54 / 90-81 Husqvarna# 99-46 / 56-73, LawnBoy# 740207, Simplicity# 1700751 / 1685290 Snapper# 1-8604, Stiga# 1134-2946-02, Toro# 28-4210 / 47-1910 / 110162
O.E.M Applications AYP# 109081X AYP# 109946X Murray# 24285 Murray# 424285 Snapper# 1-8817 Toro# 111674

435-077

Solenoid 90 degree mount - 4 pole style - 12 volt - 5/16-24 studs - 2 spade terminals

435-032

Solenoid- Internal ground with screw terminal - 3 pole style - 12 volt - 5/16-24 studs - Includes new spade converters
O.E.M Applications John Deere# AM132990 John Deere# AM133094 John Deere# AM130365

435-030

O.E.M Applications Ariens# 35770 / 35832 Bolens# 1751569 Bunton# PL4007 Encore# 363027 John Deere# AM103290 MTD# 725-0530 Noma# 53716 / 52323 Scag# 48106 / Simplicity# 1671994 Snapper# 1-8817, Stiga# 1134-2946-01, Toro# 11674
Solenoid For Kawasaki and Kohler. Fits our 150-714, 150-728, 150-729 and 150-733 starter motors. - 2 pole style - 12 volt
O.E.M Applications Kawasaki# 27010-2122 Kohler# 52-435-02S
Banta ELECTRICAL / IGNITION SOLENOIDS - O.E.M Applications SPARK PLUG ACCESSORIES
435-092 NEW O.E.M Application

135-017

B&S# 493880
Starter Solenoid. Wide frame solenoid ts, Cub Cadet model: 76, 80, 81, 86, 108, 109, 128, 129, 149, 169, 182, 282, 382, 383, 580, 582, 680, 682, 782, 784, 800,1000, 1200, 1250, 1450, 1650, 1050, 1204, 1210, 1440, 1604, 1710, 1711, 1712, 482, 582, 682, 782, 784, 1806, 1810, 1811, 1812, 1861, 1862, 982, 984, 986, 1912, 1914, 1872, 2072 and others. 12 Volt, 3 Terminals; (2) 5/16 - 18 terminals and (1) 10-32 terminal.
Terminal Spark Plug Universal application. Fits 7mm spark plug wire, positive lock.

O.E.M Application AYP# 365401R

430-249

9/16 mounting stem, battery type switch (3) position, (5) terminal

430-543

5/8 mounting stem, magneto type switch (3) position, (5) terminal
O.E.M Application Ariens 03115200 / 31152 AYP (Sears,Roper) 2683 / 2683R Gravely 019223 / 19223 Jacobsen 129846 John Deere AM103286 John Deere AM32686 / AM32318 Toro / Wheel Horse 128140, Troy Bilt 12840
O.E.M Application AYP (Sears,Roper) 102972X,145499 AYP (Sears,Roper) 158913 Briggs & Stratton 490066 / 493625 Briggs & Stratton 692318, Exmark 1543070 / 543070 Husqvarna 532102972 / 532145499 / 532158913 Noma (amf,canadiana,dynamark) 305720 Troy Bilt 1754250 / 1754250P

430-075

Ignition Switch Fits Ariens equipment. Plastic snap bezel. (4) position, (7) terminal
NOTE: Same terminal conguration as our 430-156 with smaller stem & snap bezel face

430-538

O.E.M Application Ariens# 15883

430-541

5/8 mounting stem, magneto type switch (4) position, (5) terminal
O.E.M Application AYP# 14615 AYP# 73232
O.E.M Applications AYP (Sears,Roper) 3612R , AYP (Sears,Roper) 4406R, 365402 Bobcat 480032B / 48032B Bunton PAL0903 Cub Cadet 7253026 Dixie Chopper 20245, Dixon 4197, Economy 032018, Gilson 36457, Grasshopper 183806, Honda 35100772003 Honda 4166369 John Deere AM102551 Lawn-boy 230660 / 700172 Lawn-boy 741308, Mtd 725-0267A / 925-0267 Murray 2106 / 21064, Murray 21064PA / 421064 Noma (amf,canadiana,dynamark) 300295 / 421064 Noma (amf,canadiana,dynamark) 44745 / STD365402 Power King 032018, Scag 48017, 4801701 Simplicity 178280, Snapper 27698, 7027698, 7029010 Toro / Wheel Horse 230660
Banta SWITCHES - IGNITION
430-110 O.E.M Application
(3) position, (6) terminal, 5/8 mounting stem Magneto type switch. Fits models 235432, 235437, 245432, 245437, 28N707, 28N777, 28Q777, 350422.
ELECTRICAL / IGNITION SWITCHES - IGNITION
430-251 O.E.M Application
9/16 mounting stem, magneto type switch (3) position, (6) terminal. Fits S910 and S930 front mount, 108, 111, 112, 116 lawn tractors, 316, 318, 420 garden tractors, GS25, GS30, GS45, GS75, HD45 & HD75. Also found on 300 & some 200 series.
O.E.M Applications B&S# 493625 B&S# 692318 Bobcat# 672318 Scag# 48798 Toro# 83-0020
O.E.M Application John Deeer# AM38227 Kohler# 25-099-03

430-013

430-128
O.E.M Applications Gravely# 18272 Gravely# 018272 Murray# 91846 Noma# 300687
9/16 mounting stem, magneto type switch (3) position, (6) terminal. Fits models CH11, CH12.5, CH14, CH18, CH20, CH22, CH25, CV12.5, M8, M10, M12, M16, M18, M20, TH16 and TH18.

430-245

9/16 mounting stem, magneto type switch (3) position, (5) terminal Fits 110, 112 and 140 tractors

O.E.M Application Kohler# 25-099-04 Kohler# 25-099-02 Toro# 10-3991 Toro# 11-1215
O.E.M Applications John Deere# AM31995 / AM102544
Waterproof Kit for INDAK Switches 430-000
Two piece kit: > (1) plastic nut > (1) rubber bezel

430-274

Snap in mounted (3) position, (5) terminal. Fits John Deere LT190 with 48 deck. Key not included
(Uses our 430-218 or 430-219 keys for Delta switches)

430-553

O.E.M Application John Deeer# AM133596

MTD# 725-1396 925-1396

430-250
13/16 mounting stem, magneto type switch (3) position, (6) terminal. Fits models F910, F930 front mounts; 130, 165, 170, 175, 180, 185, F912, F915, F925, RX73, RX75, RX95, SX75 and SX95.
5/8 mounting stem (3) position, (6) terminal Fits all MTD lawn and garden tractors with Briggs & Stratton OHV Vanguard engines except auto drive step thru frame models 1999 and newer.
O.E.M Application John Deeer# AM101561
Starter Key Fits most MTD riders, also found on some Troy Bilt equipment.

430-655 O.E.M

John Deere# AM122881

430-654

AYP# 140399 AYP# 154855 / 44921 AYP# 178744 / 163088 Murray# 327355 Simplicity# 1718306 Simplicity# 1713845 Simplicity# 1686734
Snap in mounted (3) position, (5) terminal Key not included (Uses our 430-667 key)

430-536

MTD# 925-04019 MTD# 725-04019 Cub Cadet# 925-04019 725-04019
Thread mounted (3) position, (5) terminal Key not included (Uses our 430-668 nut and our 430-667 key)

430-667

Ignition Switch Keys Fit our 430-655 and 430-654 ignition switches. (Multi- Application key also ts most Delta switches).
(Priced and sold in set of 2)
Snap in mounted (3) position, (5) terminal Key not included (Uses our 430-218 or our 430-219 key) Fits Cub Cadet and MTD. Cub Cadet model RZT22 before serial# 1F014G20062. Replaces Delta Switch# 6900-31P

430-668

Plastic Nut Fits our 430-654 ignition switch.

430-015

Indak Ignition Switch Keys Fit most INDAK switches.
AYP# 163968 / 175442 AYP# 175566 / 193350 Husqvarna# 55-66 John Deere# GY20074 Murray# 94762 MTD# 725-1741 MTD# 925-1741

430-161

Murray# 92377 Snap in mounted (4) position, (7) terminal, Key not included (Uses our 430-218 or 430-219 key)
Fits Husky models YTH1542XP,1542TPG / 1848XP, LTH1342 / 1342A & YTHP1542. John Deere models L100, 105, 107, 110, 120, 130, G110, LY18 and some Scotts / Sabre models. Fit MTD auto step thru frame tractors 1999 and newer.

5/8 mounting stem, magneto type switch (4) position, (6) terminal Fits front engine riders, 1992 and newer

430-504 430-156

Murray# 92556 Murray# 092556 MTD# 725-1717 MTD# 925-1717 AYP# 140301
Snapper# 1-1853 Snapper# 7011853
5/8 mounting stem, magneto type switch (2) position, (1) terminal Single screw terminal, found on riders. (For use with our 430-165)
5/8 mounting stem, magneto type switch (4) position, (7) terminal For engines equipped with fuel shut off solenoid - built since 1994. Fits model 461004X92A

430-165

Snapper# 1-2623 Snapper# 7012623
5/8 mounting stem, push button switch (2) position, (2) terminal (For use with our 430-504)

430-520 O.E.M

Snapper# 1-1155 Snapper# 7011155
430-534 NEW Application O.E.M
Cub Cadet 7253163A Cub Cadet 9253163A Mtd 1754183099 Mtd 725-3163A Mtd 925-3163 Mtd 925-3163A Troy Bilt 1754183 Troy Bilt 1754183099
5/8 mounting stem, magneto type switch (3) position, (3) terminal Fits all riders 1973 thru 1987 with screw terminals.

430-144

Snapper# 1-8816 Snapper# 7018816
Ignition Switch for Cub Cadet, Bolens and Troy Bilt applications. 5/8 mounting stem, (6) terminal 3 position
5/8 mounting stem, magneto type switch (3) position, (3) terminal Fits rear engine riders. Series 6 thru 11, 1988 to present
SWITCHES - Mullti Application are listed in alphabetical order by manufacturers name.

430-512

Toro# 103990 Kohler# 48-099-01
SWITCHES - Multi Application

430-690

Seat Switch Universal application. Screw mount. For seats with 2-3/4 hole OD Normally closed.
5/8 mounting stem, battery type switch (3) position, (5) terminal

430-954

Toro# 27-2360

430-692

9/16 mounting stem, battery type switch (3) position, (6) terminal Fits Toro Groundsmaster 3, 52, 62, 72, 172, 322, 326, 327, 400, 500, RM223D, 450D, 335D, 5100D.
Seat Switch Universal application. Screw mount. For seats with 2-3/4 hole OD Normally open.

430-686 430-523

Toro# 29-5560 Toro# 40-5940 (2) position, (2) terminal, 5/8 mounting stem. For models S200 and S620 snowblowers. Also ts 32, 36, 37, 44 and 52 mid sized commercial mowers with pull start.
Switch Connector Universal applications. 1 Pole standard connector.Used on many single pole normally open or normally closed switches.

430-710

Stiga# 1134-4093-01

430-688

(7) terminal - Fits models Stiga Park 2000 and Stiga Villa 2001. Key not included. (Uses our 430-218 or 430-219 key)
Switch Connector Universal applications. 1 Pole shorting connector. Used with single pole normally closed switches. When disconnected from the switch causes the two wire harness to be shorted together
ELECTRICAL / IGNITION SWITCHES - Multi Application SWITCHES Part#

430-698 Application O.E.M Application
Multi Application Application

430-683

Application O.E.M
Switch Connector Universal applications. 2 Pole standard connector. Used on many double pole switches (4 terminal).

430-687

Switch Connector Universal applications. 2 Pole shorting connector. Used with double pole switches (4 terminal) with a normally closed switch in the A pole position. When disconnected from the switch causes the two wire connected to pole A to be shorted.
PTO Switch For MTD equipment. Push-pull, snap mount Gold tear drop knob - 7 terminal O.E.M Application MTD# 925-04175 MTD# 925-04258

430-506 NEW

PTO Switch (2) position, (5) terminals. Fits Cub Cadet. Most box-frame electric clutch applications. O.E.M Application Cub Cadet# 725-0893 Cub Cadet# 925-0893

430-695

PTO Switch Connector For Universal applications. Normally closed switch in pole A

430-691

PTO Switch Connector For Universal applications. Normally open switch in pole A

430-684 NEW

PTO Switch (2) position, (7) terminal, Bottom middle terminal blank and left side middle blank. Push - pull / snap mount. Fits Cub Cadet models: Z42 - Z54, 364365, 1515-1529, 2130 - 2186 & GT2000. O.E.M Application Cub Cadet# 725-3233 Cub Cadet# 925-3233

430-693

PTO Switch For Universal applications. Push-pull, snap mount. Yellow knob. (2) position, (8) terminal.
Note: Same as our 430-656 PTO switch, the only difference is the knob colour.

430-682

PTO Switch For Exmark, Ariens, Toro etc, also see our 430-657. Push-pull, snap mount Red knob - 2 position, 5 terminal O.E.M Application Ariens# 1545600 Ariens# 01545600 Bobcat# 2188153, Bunton# 2188153 Kees# 102424, Kubota# K121162230, Snapper# 28542 Snapper# 7028542, Toro# 95-7489, Woods# 072262

430-681 NEW

PTO Switch (2) position, (8) terminal. Bottom middle terminal blank. Push - pull / snap mount. Fits Exmark.
Note: Electrical rating 10A@12-+14VDC. Number life at rated load: 100,000 cycles resistive. (High Current).

Code# 5792361 / 5361605

430-641 Application
Oil Level Sensor Switch For Honda engine models GX120, GX160 and GX200.

430-658

Plunger Interlock Switch Single pole, snap in mount. Normally open 2 positions, 2 terminals
Honda# 15510-ZE1-033 15510-ZE1-003 15510-ZE1-023
Code# 5962063 Code# 1501733 / 5262605
Universal Kill Switch On / off switch found on many chain saws and trimmers. Using a single wire, self grounding type switch.
O.E.M Application Ariens# 03095700 / 30957 Ayp# 109869X / Bobcat# 38383 Exmark# 1513152 / 513152 Ferris# 21769 Great Dane# D38085 John Deere# AM108483 Kees# 923408 Snapper# 27225 / 7027225

430-670

O.E.M Application Green Machine# 201030 Homelite# 63938 Homelite# 93653 John Deere# PT1008 Toro# 29-7660 Weedeater# 90824 Weedeater# 534-193001
Seat Safety Switch For AYP models 2006 and newer.
O.E.M Application AYP# 401545

430-660

Plunger Interlock Switch Single pole, Normally open
Universal Deluxe Kill Switch On / Off switch found on Go-carts, ATVs etc. Comes complete with a 48 lead wire and (2) metal clamps with screws.
O.E.M Application Ariens# 03657100 / 36571 Exmark# 513051 / Ferris# 21451 Hustler# 781211 John Deere# AM104884 Mtd# 725-1657A / 925-1657A Murray# 24273 / Scag# 481637 Troy Bilt# 1748723 / Yazoo# 1923025
O.E.M Application Universal

430-659

Plunger Interlock Switch Double pole, Normally open / normally closed
Kill Button Comes complete with 42 lead wire, ts 7/8 - 1 tube handles. Used on lawn and garden equipment as well as minibikes, Go-carts etc.
O.E.M Application Ariens# 088281 / 08828100 Ayp# 109553X / Bobcat# 108208 Bushhog# 99073 / Dixon# 4242 Encore# 523034 / Exmark# 1-633111 Ferris# 22095 / John Deere# AM128925 Kees# 101080 / Mtd# 725-3169A MTD# 925-3169A Snapper# 23355 Toro / Wheel Horse# 112045 Toro / Wheel Horse# 1120455 Troy Bilt# 1751328

430-671

Plunger Interlock Switch Low prole, snap in mount. N.C. / N.C. (Normally closed) 2 positions, 4 terminals. Fits John Deere models: LT150, 160, 170, 180, 190, LTR180, G110, L100, 105, 107, 108, 110, 111, 118, 120 and L130, LA100, 110, 120 and LA130, 102, 105, 115, 125, 135, 145.

430-665

Plunger Interlock Switch Double pole, snap in mount. Normally open / normally closed
O.E.M Application John Deere# GY20073
O.E.M Application Ayp# 153664 / 176138 Cub Cadet# 725-3164A Cub Cadet# 9253164A Ferris# 22182 MTD# 725-3164A MTD# 925-3164A Snapper# 22886

430-663

430-733 Application
Headlight Switch Fits AYP riders.
Plunger Interlock Switch Single pole,right angle snap mounted, Normally open
O.E.M Application Ariens# 027514100 Ariens# 27541 / Ayp# 160784 Cub Cadet# 7253167 / 9253167 Great Dane# D38001 John Deere# AM102119 / AM103119 Kubota# K112262282 / Mtd# 725-3167 Murray# 024273 / 57211 Scag# 481638 / 48717 / Snapper# 15707