HXL35-47002 Engine Parts List #1

Page 1 of 13

HXL35-47002 Engine Parts List #1 Ref # 1 1A 14A 14A 14A 41 41A 56 56A 57 Part Number 35069A 32600 29314B 29315C 34777 29313C 32538B 32548B 32549B 30963B 28594 32610A 32197A 27241 30756B 27677A 30574 29953C 30579A 650695A 6021A 650865 650694A 27234A 26754A 28416A 27272A 29752 Qty Description Cylinder (CI liner)(Incl.1A,2,3 & 6)( 2-1/2") Bushing, Cylinder Pin, Dowel Pipe plug, 1/4-18 Plug, Drain, 1/4-18 Seal, Oil Intake Valve (Std.) (Incl. 11) Intake Valve (1/32" OS) (Incl. 11) Exhaust Valve (1/32" OS) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Valve Spring Cap (Used in early produ ction) Spring, Valve Valve Spring Cap Crankshaft (Incl. 23) Piston, Pin & Ring Set (Std.) (2-1/2" Bore) Piston, Pin & Ring Set (.010" OS) Piston, Pin & Ring Set (.020" OS) Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16) Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Ring Set (Std.) (2-1/2" Bore) Ring Set (.010" OS) Ring Set (.020" OS) Ring, Piston retaining Rod Assy., Connecting (Incl. 19) Dipper, Oil Bolt, Connecting rod Camshaft (MCR) Lifter, Valve Cover, Cylinder (Incl. 23, 26, 28 & 3 4) (BB) * Gasket, Cylinder cover Screw, 1/4-20 x 1-1/4" Plug, Oil fill (Incl. 28) Shaft, Mechanical governor * Gasket, Cylinder head Head, Cylinder (Incl. 41A) Screw, 5/16-18 x 2-1/4" (Use as requ ired) Screw, 5/16-18 x 1-1/2" (Use as requi red) Screw, 5/16-18 x 2" (Use as required) Screw, 5/16-18 x 2" (Use as required) Resistor Spark Plug (J-8C) Baffle, Heat * Gasket, Valve spring cover (Two requi red) Breather Body & valve assy. Element, Breather Cover, Valve spring Grommet, Breather tube Tube, Breather Screw, 10-24 x 1/2" * Gasket, Intake to cylinder Pipe, Intake (Incl. 54) Screw, 1/4-20 x 1-19/32" Screw, 1/4-20 x 1-7/32" Screw, 1/4-28 x 7/8" * Gasket, Carburetor to intake * Gasket, Carburetor to air cleaner Nut & Lockwasher Assy., 1/4-28

Page 2 of 13

HXL35-47002 Engine Parts List #1 Ref # Part Number 58B 31545 58A 730127 58A 730164 69A 77B 650548 33879A

Page 3 of 13

Qty Description Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as required) Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A) (Use as required) Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not for use on PTO side exhaust) Muffler (Incl. 77B) Plate, Lock Deflector, Exhaust Screw, 1/4-20 x 2-1/4" Screw, 8-32 x 3/8" Link, Throttle Lever, Governor Clamp, Governor lever Screw, 8-32 x 5/16" Control Bracket (Incl. 88, 89, 100 & 101) NOTE: In original production the speed control assembly is riveted to the blower housing baffle (Ref. #107). Replacement speed control assembly includes screws (Ref. #101)and nuts (Ref. #100) for mounting. Spring, Compression Screw, 5-40 x 7/16" Clip, Conduit Screw, 10-32 x 3/8" Spring, Extension Locknut, 8-32 (Use as required) Screw, 8-32 x 1/2" (Use as required) Screw, 8-32 x 3/8" (Use as required) Screw, 10-24 x 9/16" (Use as required ) Washer, Flat Rod, Governor Baffle, Blower housing Screw, 8-18 x 7/16" Screw, 1/4-20 x 5/8" Baffle, Extension Gasket, Stator Screw, 1/4-20 x 5/8" Flywheel key Cover, Spark plug (Use as required) Housing, Blower NOTE: In original production, the starter may be riveted to theblower housing. If the starter or blower housing needs replacement, the other may need holes used for pop rivetingenlarged to use standard mounting hardware. Order 4 nuts (#29752) required to mount starter to replaceme Screw, 1/4-28 x 7/16" Washer Lockwasher, 5/16 Clip, Spark plug shorting Screen, Starter Cup, Starter Washer, Belleville Nut & Lockwasher Assy., 1/4-28 Screw, 10-24 x 1/2"

108A 119

610118 33663C

130A 136B 137

650128
HXL35-47002 Engine Parts List #1 Ref # Part Number 30200 34156A

Page 4 of 13

Qty Description Extension, Blower housing Bracket, Hold down Screw, 10-24 x 9/16" Fuel Tank (Incl. 142 & 156) NOTE: These tanks were built with different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 33032 or 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Cap, Fuel filler (Use as required) Cap, Fuel filler (Std.) (Use as requi red) Plate, Fuel tank mounting Fuel Tank Bracket Screw, 1/4-20 x 5/8" Screw, 1/4-15 x 7/8" Spacer, Tank bracket (Not used in all models) Washer, Flat Fuel Line (Braided, 8-1/4") (Use as r equired) Fuel Line (Braided, 16") (Use as requ ired) Clamp, Fuel line (Use as required) Terminal Ass'y. (Use as required) Rod, Choke Str.Muff Kit(Incl.163A,163B,163C)(Opt.) Decal, Instruction (Optional) Bracket, Starter air cleaner (Optiona l) Air Cleaner, Starter (Optional) Filter, Pre-air Element Assy., Air cleaner (Incl. 176 ) Pop Rivet (1/8" dia.) (Purchase local ly) Bracket, Air cleaner Gasket, Air cleaner elbow Fitting, Breather Elbow Assy., Air cleaner (Incl.170,17 1,175) Elbow, Air cleaner Screw, 10-32 x 7/8" Stud, 1/4-20 Nut & Lockwasher, 1/4-20 Bracket, Air cleaner Cover, Air cleaner Decal, Instruction Decal, Air cleaner Contact Assy., Breaker Condenser Inlet Needle Seat & Clip Assy. Carburetor (Incl. 56) (Refer to Division 5, Section A, page 182 for breakdown) Magneto NOTE: The complete magneto is not available as an assembly. The magnetonumber is shown for referencepurposes only. Order component parts individually, as shown in parts list. (Refer to Div.5,Sec.B, pg.39 for breakdown) Starter, Rewind (Refer to Division 5, Section C, page 25 for breakdown) Electric Starter Motor (120 volt) This 120-Volt starter motor kit can be used on those models equipped with electric starter provisions. Refer to Division 5, Section D, Page 16 for breakdown.
163C 163B 163A 178 190C 190A 194A 195A
33032 410144B 34183A 34699 34698A 30547A 30548B 631021 632229

196 611025

197 590420A 198A 33290D
HXL35-47002 Engine Parts List #1 Ref # Part Number 200 33233A Qty Description * Gasket Set (Incl. items marked *)

Page 5 of 13

HXL35-47002 Engine Parts List #2

Page 6 of 13

HXL35-47002 Engine Parts List #2 Ref # 1A 14A 14A 14A 41A 56A 57 58A Part Number 29314B 29315C 34777 29313C 35070 32538B 32548B 32549B 20381 30963B 30756B 28540 27677A 29193 30588A 29953C 650694A 27234A 34146 26754A 28416A 27272A 29752 730127

Page 7 of 13

Qty Description Bushing, Cylinder Pipe plug, 1/4-18 Plug, Drain, 1/4-18 Seal, Oil Intake Valve (Std.) (Incl. 11) Intake Valve (1/32" OS) (Incl. 11) Exhaust Valve (1/32" OS) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Valve Spring Cap (Used in early produ ction) Spring, Valve Valve Spring Cap Crankshaft (Incl. 23) Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16) Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Ring, Piston retaining Rod Assy., Connecting (Incl. 19) Dipper, Oil Lifter, Valve Cover, Cylinder (Incl. 23, 26, 28 & 3 4) (BB) Seal, Oil * Gasket, Cylinder cover * Gasket, Oil fill plug Shaft, Mechanical governor Washer, Flat Gear Assy., Governor (Incl. 35) Ring, Retaining Spool, Governor * Gasket, Cylinder head Screw, 5/16-18 x 2" (Use as required) * Gasket, Valve spring cover (Two requi red) Cover, Valve spring * Gasket, Intake to cylinder Pipe, Intake (Incl. 54) Screw, 1/4-20 x 1-19/32" Screw, 1/4-20 x 1-7/32" Screw, 1/4-28 x 7/8" * Gasket, Carburetor to intake * Gasket, Carburetor to air cleaner Nut & Lockwasher Assy., 1/4-28 Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as required) Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not for use on PTO side exhaust) Screw, 1/4-20 x 2-1/4" Screw, 8-32 x 3/8" Link, Throttle

58A 730164 58B 31545 69A 730162 77B 31858
HXL35-47002 Engine Parts List #2 Ref # Part Number 87 33879A

Page 8 of 13

Qty Description Control Bracket (Incl. 88, 89, 100 & 101) NOTE: In original production the speed control assembly is riveted to the blower housing baffle (Ref. #107). Replacement speed control assembly includes screws (Ref. #101)and nuts (Ref. #100) for mounting. Spring, Compression Screw, 10-32 x 3/8" Spring Assy., Extension (Incl. 98A) Washer, Flat Rod, Governor Baffle, Blower housing Screw, 8-18 x 7/16" Screw, 1/4-20 x 5/8" Baffle, Extension Screw, 1/4-20 x 5/8" Flywheel key Cover, Spark plug (Use as required) Screw, 1/4-28 x 7/16" Washer Lockwasher, 5/16 Cup, Starter Nut & Lockwasher Assy., 1/4-28 Extension, Blower housing Bracket, Hold down Screw, 10-24 x 9/16" Fuel Tank (Incl. 142 & 156) NOTE: These tanks were built with different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 33032 or 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Cap, Fuel filler (Use as required) Cap, Fuel filler (Std.) (Use as requi red) Plate, Fuel tank mounting Fuel Tank Bracket Screw, 1/4-20 x 5/8" Screw, 1/4-15 x 7/8" Spacer, Tank bracket (Not used in all models) Fuel Line (Braided, 8-1/4") (Use as r equired) Fuel Line (Braided, 16") (Use as requ ired) Clamp, Fuel line (Use as required) Terminal Ass'y. (Use as required) Rod, Choke Str.Muff Kit(Incl.163A,163B,163C)(Opt.) Air Cleaner, Starter (Optional) Bracket, Starter air cleaner (Optiona l) Decal, Instruction (Optional) Filter, Pre-air Element Assy., Air cleaner (Incl. 176 ) Stud, 1/4-20 Nut & Lockwasher, 1/4-20 Bracket, Air cleaner Decal, Instruction Decal, Air cleaner Contact Assy., Breaker Condenser Inlet Needle Seat & Clip Assy.

108A 131 136B 140 141

34156A
163 163A 163B 163C 177 190C 190A 194A
33032 410144B 34183A 30547A 30548B 631021
HXL35-47002 Engine Parts List #2 Ref # Part Number 195A 611025

Page 9 of 13

Qty Description Carburetor (Incl. 56) (Refer to Division 5, Section A, page 182 for breakdown) Magneto NOTE: The complete magneto is not available as an assembly. The magnetonumber is shown for referencepurposes only. Order component parts individually, as shown in parts list. (Refer to Div.5,Sec.B, pg.39 for breakdown) Starter, Rewind (Refer to Division 5, Section C, page 25 for breakdown) Electric Starter Motor (120 volt) This 120-Volt starter motor kit can be used on those models equipped with electric starter provisions. Refer to Division 5, Section D, Page 16 for breakdown. * Gasket Set (Incl. items marked *)

200 33233A

HXL35-47002 Engine Parts List #3

Page 10 of 13

HXL35-47002 Engine Parts List #3 Ref # 1A 14A 14A 14A 39 41A 55 56A 58B Part Number 29314B 29315C 34777 29313C 35070 32538B 32548B 32549B 27241 30756B 27677A 30574 29953C 650694A 27234A 34146 26754A 28416A 6201 27272A 31545

Page 11 of 13

Qty Description Bushing, Cylinder Pipe plug, 1/4-18 Plug, Drain, 1/4-18 Seal, Oil Intake Valve (Std.) (Incl. 11) Intake Valve (1/32" OS) (Incl. 11) Exhaust Valve (1/32" OS) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Valve Spring Cap (Used in early produ ction) Spring, Valve Valve Spring Cap Crankshaft (Incl. 23) Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16) Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Lifter, Valve Cover, Cylinder (Incl. 23, 26, 28 & 3 4) (BB) * Gasket, Cylinder cover Shaft, Mechanical governor * Gasket, Cylinder head Screw, 5/16-18 x 2" (Use as required) * Gasket, Valve spring cover (Two requi red) Cover, Valve spring * Gasket, Intake to cylinder Pipe, Intake (Incl. 54) Screw, 1/4-20 x 1-19/32" Screw, 1/4-20 x 1-7/32" Screw, 1/4-28 x 7/8" * Gasket, Carburetor to air cleaner * Gasket, Carburetor to intake Nut & Lockwasher Assy., 1/4-28 Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as required) Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A) (Use as required) Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not for use on PTO side exhaust) Screw, 1/4-20 x 2-1/4" Screw, 8-32 x 3/8" Link, Throttle Control Bracket (Incl. 88, 89, 100 & 101) NOTE: In original production the speed control assembly is riveted to the blower housing baffle (Ref. #107). Replacement speed control assembly includes screws (Ref. #101)and nuts (Ref. #100) for mounting. Spring, Compression Clip, Conduit Screw, 10-32 x 3/8" Locknut, 8-32 (Use as required) Screw, 8-32 x 1/2" (Use as required) Screw, 8-32 x 3/8" (Use as required) Screw, 10-24 x 9/16" (Use as required )
58A 730127 58A 730164 69A 730162 77B 33879A
HXL35-47002 Engine Parts List #3 Ref # 107 108A 136B Part Number 34156A

Page 12 of 13

Qty Description Washer, Flat Rod, Governor Baffle, Blower housing Screw, 8-18 x 7/16" Screw, 1/4-20 x 5/8" Baffle, Extension Screw, 1/4-20 x 5/8" Flywheel key Cover, Spark plug (Use as required) Screw, 1/4-28 x 7/16" Washer Lockwasher, 5/16 Cup, Starter Nut, Flywheel Nut & Lockwasher Assy., 1/4-28 Extension, Blower housing Bracket, Hold down Screw, 10-24 x 9/16" Fuel Tank (Incl. 142 & 156) NOTE: These tanks were built with different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 33032 or 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Cap, Fuel filler (Use as required) Cap, Fuel filler (Std.) (Use as requi red) Plate, Fuel tank mounting Fuel Tank Bracket Screw, 1/4-20 x 5/8" Screw, 1/4-15 x 7/8" Spacer, Tank bracket (Not used in all models) Fuel Line (Braided, 8-1/4") (Use as r equired) Fuel Line (Braided, 16") (Use as requ ired) Clamp, Fuel line (Use as required) Terminal Ass'y. (Use as required) Rod, Choke Air Cleaner, Starter (Optional) Str.Muff Kit(Incl.163A,163B,163C)(Opt.) Bracket, Starter air cleaner (Optiona l) Decal, Instruction (Optional) Filter, Pre-air Element Assy., Air cleaner (Incl. 176 ) Stud, 1/4-20 Nut & Lockwasher, 1/4-20 Bracket, Air cleaner Nut, Wing, 1/4-20 Decal, Instruction Decal, Air cleaner Contact Assy., Breaker Condenser Inlet Needle Seat & Clip Assy. Carburetor (Incl. 56) (Refer to Division 5, Section A, page 182 for breakdown) Magneto NOTE: The complete magneto is not available as an assembly. The magnetonumber is shown for referencepurposes only. Order component parts individually, as shown in parts list. (Refer to Div.5,Sec.B, pg.39 for breakdown)

163A 163 163B 163C 190C 190A 194A 195A
33032 410144B 34183A 34704 30547A 30548B 631021 632229
HXL35-47002 Engine Parts List #3 Ref # Part Number 197 590420A 198A 33290D

Page 13 of 13

Qty Description Starter, Rewind (Refer to Division 5, Section C, page 25 for breakdown) Electric Starter Motor (120 volt) This 120-Volt starter motor kit can be used on those models equipped with electric starter provisions. Refer to Division 5, Section D, Page 16 for breakdown.

HXL35-47004B Engine Parts List #1

Page 1 of 12

HXL35-47004B Engine Parts List #1 Ref # 1A 14A 14A 14A 41 41A 56 56A 57 Part Number 34836 35069A 32600 29314B 29315C 29313C 34516 32538B 32548B 32549B 32610A 32197A 27241 30756B 27677A 30574 29953C 30579A 650695A 6021A 650865 650694A 27234A 26754A 28416A 27272A 29752 Qty Description Bushing, Cylinder Cylinder (CI liner)(Incl.1A,2,3 & 6)( 2-1/2") Pin, Dowel Pipe plug, 1/4-18 Seal, Oil Intake Valve (Std.) (Incl. 11) Intake Valve (1/32" OS) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (1/32" OS) (Incl. 11) Valve Spring Cap (Used in early produ ction) Spring, Valve Valve Spring Cap Crankshaft (Incl. 23) Piston, Pin & Ring Set (Std.) (2-1/2" Bore) Piston, Pin & Ring Set (.010" OS) Piston, Pin & Ring Set (.020" OS) Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16) Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Ring Set (Std.) (2-1/2" Bore) Ring Set (.010" OS) Ring Set (.020" OS) Ring, Piston retaining Rod Assy., Connecting (Incl. 18 & 19) Dipper, Oil Bolt, Connecting rod Camshaft (MCR) Lifter, Valve Cover, Cylinder (Incl. 23, 26, 28 & 3 4) (BB) * Gasket, Cylinder cover Screw, 1/4-20 x 1-1/4" Plug, Oil fill (Incl. 28) Shaft, Mechanical governor * Gasket, Cylinder head Head, Cylinder (Incl. 41A) Screw, 5/16-18 x 2-1/4" (Use as requ ired) Screw, 5/16-18 x 1-1/2" (Use as requi red) Screw, 5/16-18 x 2" (Use as required) Screw, 5/16-18 x 2" (Use as required) Resistor Spark Plug (J-8C) Baffle, Heat * Gasket, Valve spring cover (Two requi red) Breather Body & valve assy. Element, Breather Cover, Valve spring Grommet, Breather tube Tube, Breather Screw, 10-24 x 1/2" * Gasket, Intake to cylinder Pipe, Intake (Incl. 54) Screw, 1/4-20 x 1-19/32" Screw, 1/4-20 x 1-7/32" Screw, 1/4-28 x 7/8" * Gasket, Carburetor to intake * Gasket, Carburetor to air cleaner Nut & Lockwasher Assy., 1/4-28

Page 2 of 12

HXL35-47004B Engine Parts List #1 Ref # Part Number 58B 31545 58A 730127 58A 730164 69A 77B 650548 33858A

Page 3 of 12

Qty Description Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as required) Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A) (Use as required) Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not for use on PTO side exhaust) Muffler (Incl. 77B) Screw, 1/4-20 x 2-1/4" Link, Throttle Lever, Governor Clamp, Governor lever Screw, 8-32 x 5/16" Control Bracket (Incl.88,89,100,101 & 157) NOTE: In original production the speed control assembly is riveted to the blower housing baffle (Ref. #107). Replacement speed control assembly includes screws (Ref. #101)and nuts (Ref. #100) for mounting. Spring, Compression Screw, 5-40 x 7/16" Spring, Extension Locknut, 8-32 (Use as required) Screw, 8-32 x 1/2" (Use as required) Screw, 8-32 x 3/8" (Use as required) Screw, 10-24 x 9/16" (Use as required ) Washer, Flat Rod, Governor Baffle, Blower housing Screw, 8-18 x 7/16" Screw, 1/4-20 x 5/8" Baffle, Extension Spacer, Flywheel key Solid State Ass'y. Stud, Solid State mounting Screw, Torx T-15, 10-24 x 1" Flywheel key Cover, Spark plug (Use as required) Ground Wire Ass'y. Flywheel Housing, Blower NOTE: In original production, the starter may be riveted to theblower housing. If the starter or blower housing needs replacement, the other may need holes used for pop rivetingenlarged to use standard mounting hardware. Order 4 nuts (#29752) required to mount starter to replaceme Screw, 1/4-28 x 7/16" Washer Lockwasher, 5/16 Clip, Spark plug shorting Screen, Starter Cup, Starter Washer, Belleville Nut & Lockwasher Assy., 1/4-28 Screw, 10-24 x 1/2" Extension, Blower housing

108A 119

34443A 33663C

132 136B 137 138

650128 29745
HXL35-47004B Engine Parts List #1 Ref # 141 Part Number 34156A

Page 4 of 12

Qty Description Bracket, Hold down Screw, 10-24 x 9/16" Fuel Tank (Incl. 142 & 156) NOTE: These tanks were built with different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 33032 or 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Cap, Fuel filler (Use as required) Cap, Fuel filler (Std.) (Use as requi red) Plate, Fuel tank mounting Fuel Tank Bracket Screw, 1/4-20 x 5/8" Screw, 1/4-15 x 7/8" Spacer, Tank bracket (Not used in all models) Washer, Flat Fuel Line (Braided, 8-1/4") (Use as r equired) Fuel Line (Braided, 16") (Use as requ ired) Clamp, Fuel line (Use as required) Terminal Ass'y. (Use as required) Rod, Choke Decal, Instruction (Optional) Bracket, Starter air cleaner (Optiona l) Str.Muff Kit(Incl.163A,163B,163C)(Opt.) Air Cleaner, Starter (Optional) Filter, Pre-air Element Assy., Air cleaner (Incl. 176 ) Pop Rivet (1/8" dia.) (Purchase local ly) Bracket, Air cleaner Gasket, Air cleaner elbow Fitting, Breather Elbow Assy., Air cleaner (Incl.170,17 1,175) Elbow, Air cleaner Screw, 10-32 x 7/8" Stud, 1/4-20 Nut & Lockwasher, 1/4-20 Bracket, Air cleaner Cover, Air cleaner Decal, Instruction Decal, Instruction Decal, Air cleaner Inlet Needle Seat & Clip Assy. Carburetor (Incl. 56) (Refer to Division 5, Section A, page 182 for breakdown) Starter, Rewind In original production, the starter may be riveted to the blowerhousing. If the starter or blower housing needs replacement, the other may need holes used for pop riveting enlargedto use standard mounting hardware. Order 4 nuts (29752) required to mount starter to replacement blower Electric Starter Motor (120 volt) This 120-Volt starter motor kit can be used on those models equipped with electric starter provisions. Refer to Division 5, Section D, Page 16 for breakdown. * Gasket Set (Incl. items marked *)

161 163C 163B 163 163A 178 190F 190C 190A 194A 195A
33032 410144B 34183A 34699 34698A 632229

197 590420

198A 33290D

200 33233A

HXL35-47004B Engine Parts List #2

Page 5 of 12

HXL35-47004B Engine Parts List #2 Ref # 1A 12 14A 14A 14A 41A 56A 57 58A Part Number 32600 29314B 29315C 29313C 32538B 32548B 32549B 30756B 28540 27677A 29193 30588A 29953C 650694A 27234A 34146 26754A 28416A 27272A 29752 730127

Page 6 of 12

Qty Description Bushing, Cylinder Pipe plug, 1/4-18 Seal, Oil Intake Valve (Std.) (Incl. 11) Intake Valve (1/32" OS) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (1/32" OS) (Incl. 11) Valve Spring Cap (Used in early produ ction) Spring, Valve Valve Spring Cap Crankshaft (Incl. 23) Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16) Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Ring, Piston retaining Rod Assy., Connecting (Incl. 18 & 19) Dipper, Oil Lifter, Valve Cover, Cylinder (Incl. 23, 26, 28 & 3 4) (BB) Seal, Oil * Gasket, Cylinder cover * Gasket, Oil fill plug Shaft, Mechanical governor Washer, Flat Gear Assy., Governor (Incl. 35) Ring, Retaining Spool, Governor * Gasket, Cylinder head Screw, 5/16-18 x 2" (Use as required) * Gasket, Valve spring cover (Two requi red) Cover, Valve spring * Gasket, Intake to cylinder Pipe, Intake (Incl. 54) Screw, 1/4-20 x 1-19/32" Screw, 1/4-20 x 1-7/32" Screw, 1/4-28 x 7/8" * Gasket, Carburetor to intake * Gasket, Carburetor to air cleaner Nut & Lockwasher Assy., 1/4-28 Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as required) Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not for use on PTO side exhaust) Screw, 1/4-20 x 2-1/4" Link, Throttle Control Bracket (Incl.88,89,100,101 & 157) NOTE: In original production the speed control assembly is riveted to the blower housing baffle (Ref. #107). Replacement speed control assembly includes screws (Ref. #101)and nuts (Ref. #100) for mounting.
58A 730164 58B 31545 69A 730162 77B 33858A
HXL35-47004B Engine Parts List #2 Ref # 108A 136B Part Number 34080 34443A 30200 34156A

Page 7 of 12

Qty Description Spring, Compression Spring Assy., Extension (Incl. 98A) Washer, Flat Rod, Governor Baffle, Blower housing Screw, 1/4-20 x 5/8" Screw, 8-18 x 7/16" Baffle, Extension Spacer, Flywheel key Solid State Ass'y. Stud, Solid State mounting Screw, Torx T-15, 10-24 x 1" Flywheel key Cover, Spark plug (Use as required) Ground Wire Ass'y. Screw, 1/4-28 x 7/16" Washer Lockwasher, 5/16 Cup, Starter Nut & Lockwasher Assy., 1/4-28 Extension, Blower housing Bracket, Hold down Screw, 10-24 x 9/16" Fuel Tank (Incl. 142 & 156) NOTE: These tanks were built with different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 33032 or 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Cap, Fuel filler (Use as required) Cap, Fuel filler (Std.) (Use as requi red) Plate, Fuel tank mounting Fuel Tank Bracket Screw, 1/4-20 x 5/8" Screw, 1/4-15 x 7/8" Spacer, Tank bracket (Not used in all models) Fuel Line (Braided, 8-1/4") (Use as r equired) Fuel Line (Braided, 16") (Use as requ ired) Clamp, Fuel line (Use as required) Terminal Ass'y. (Use as required) Rod, Choke Air Cleaner, Starter (Optional) Bracket, Starter air cleaner (Optiona l) Str.Muff Kit(Incl.163A,163B,163C)(Opt.) Decal, Instruction (Optional) Filter, Pre-air Element Assy., Air cleaner (Incl. 176 ) Stud, 1/4-20 Nut & Lockwasher, 1/4-20 Bracket, Air cleaner Decal, Air cleaner Decal, Instruction Decal, Instruction Inlet Needle Seat & Clip Assy. Carburetor (Incl. 56) (Refer to Division 5, Section A, page 182 for breakdown)

163A 163B 163 163C 177 190A 190C 190F 194A 195A
33032 410144B 34183A 632229
HXL35-47004B Engine Parts List #2 Ref # Part Number 197 590420

Page 8 of 12

Qty Description Starter, Rewind In original production, the starter may be riveted to the blowerhousing. If the starter or blower housing needs replacement, the other may need holes used for pop riveting enlargedto use standard mounting hardware. Order 4 nuts (29752) required to mount starter to replacement blower Electric Starter Motor (120 volt) This 120-Volt starter motor kit can be used on those models equipped with electric starter provisions. Refer to Division 5, Section D, Page 16 for breakdown. * Gasket Set (Incl. items marked *)
HXL35-47004B Engine Parts List #3

Page 9 of 12

HXL35-47004B Engine Parts List #3 Ref # 1A 12 14A 14A 14A 39 41A 56A 57 58A Part Number 32600 29314B 29315C 29313C 32538B 32548B 32549B 27241 30756B 27677A 30574 29953C 650694A 27234A 34146 26754A 28416A 27272A 29752 730127

Page 10 of 12

Qty Description Bushing, Cylinder Pipe plug, 1/4-18 Seal, Oil Intake Valve (Std.) (Incl. 11) Intake Valve (1/32" OS) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (Std.) (Incl. 11) Exhaust Valve (1/32" OS) (Incl. 11) Valve Spring Cap (Used in early produ ction) Spring, Valve Valve Spring Cap Crankshaft (Incl. 23) Piston & Pin Ass'y.(Std.)(2-1/2")(Inc l.16) Piston & Pin Ass'y. (.010" OS) (Incl. 16) Piston & Pin Ass'y. (.020" OS) (Incl. 16) Lifter, Valve Cover, Cylinder (Incl. 23, 26, 28 & 3 4) (BB) * Gasket, Cylinder cover Shaft, Mechanical governor * Gasket, Cylinder head Screw, 5/16-18 x 2" (Use as required) * Gasket, Valve spring cover (Two requi red) Cover, Valve spring * Gasket, Intake to cylinder Pipe, Intake (Incl. 54) Screw, 1/4-20 x 1-19/32" Screw, 1/4-20 x 1-7/32" Screw, 1/4-28 x 7/8" * Gasket, Carburetor to intake * Gasket, Carburetor to air cleaner Nut & Lockwasher Assy., 1/4-28 Air Cleaner Ass'y. (Incl.56A, 58, 59, 60, 66, 67 & 170) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 58, 59, 60, 66, 67 & 170A) (Use as required) Air Cleaner Ass'y. (Incl. 56A, 59A, 60A, 61 & 62) (Use as required) Kit, Exhaust adapter (Incl. 69 & 77B) (Use as required) (Not for use on PTO side exhaust) Screw, 1/4-20 x 2-1/4" Link, Throttle Control Bracket (Incl.88,89,100,101 & 157) NOTE: In original production the speed control assembly is riveted to the blower housing baffle (Ref. #107). Replacement speed control assembly includes screws (Ref. #101)and nuts (Ref. #100) for mounting. Spring, Compression Locknut, 8-32 (Use as required) Screw, 8-32 x 1/2" (Use as required) Screw, 8-32 x 3/8" (Use as required) Screw, 10-24 x 9/16" (Use as required ) Washer, Flat Rod, Governor Baffle, Blower housing Screw, 8-18 x 7/16"

650701

HXL35-47004B Engine Parts List #3 Ref # 136B Part Number 34080 34443A 34156A

Page 11 of 12

Qty Description Screw, 1/4-20 x 5/8" Baffle, Extension Spacer, Flywheel key Solid State Ass'y. Stud, Solid State mounting Screw, Torx T-15, 10-24 x 1" Flywheel key Cover, Spark plug (Use as required) Ground Wire Ass'y. Screw, 1/4-28 x 7/16" Washer Lockwasher, 5/16 Cup, Starter Nut, Flywheel Nut & Lockwasher Assy., 1/4-28 Extension, Blower housing Bracket, Hold down Screw, 10-24 x 9/16" Fuel Tank (Incl. 142 & 156) NOTE: These tanks were built with different size fuel inlet openings. Tanks with the 1-3/16" I.D. opening use fuel cap 33032 or 34210. Tanks with the 1-1/2" I.D. opening use fuel cap 35355. Cap, Fuel filler (Use as required) Cap, Fuel filler (Std.) (Use as requi red) Plate, Fuel tank mounting Fuel Tank Bracket Screw, 1/4-20 x 5/8" Screw, 1/4-15 x 7/8" Spacer, Tank bracket (Not used in all models) Fuel Line (Braided, 8-1/4") (Use as r equired) Fuel Line (Braided, 16") (Use as requ ired) Clamp, Fuel line (Use as required) Terminal Ass'y. (Use as required) Rod, Choke Str.Muff Kit(Incl.163A,163B,163C)(Opt.) Air Cleaner, Starter (Optional) Decal, Instruction (Optional) Bracket, Starter air cleaner (Optiona l) Filter, Pre-air Element Assy., Air cleaner (Incl. 176 ) Stud, 1/4-20 Nut & Lockwasher, 1/4-20 Bracket, Air cleaner Nut, Wing, 1/4-20 Decal, Instruction Decal, Air cleaner Decal, Instruction Inlet Needle Seat & Clip Assy. Carburetor (Incl. 56) (Refer to Division 5, Section A, page 182 for breakdown) Starter, Rewind In original production, the starter may be riveted to the blowerhousing. If the starter or blower housing needs replacement, the other may need holes used for pop riveting enlargedto use standard mounting hardware. Order 4 nuts (29752) required to mount starter to replacement blower
163 163A 163C 163B 190F 190A 190C 194A 195A
33032 410144B 34183A 631021 632229
HXL35-47004B Engine Parts List #3 Ref # Part Number 198A 33290D

Page 12 of 12

Qty Description Electric Starter Motor (120 volt) This 120-Volt starter motor kit can be used on those models equipped with electric starter provisions. Refer to Division 5, Section D, Page 16 for breakdown.