( 1 of 4 shown ) 8 - #22

NC250/- #22 NC260B 1 - #- #- #- #- #18 CENTRAL EQUIPMENT 4 - #18 plus 4 - #18 shielded

Wallplate See Note E

NC262 EXPANSION 1 - #14 PK261A Dome Light Power Supply 25 - #22 shielded

NC255/235

MASTER EXPANDER Modular Cables Provided

MASTER STATION

NOTE: The 120 VAC power connections must be wired so that the NC260B & PK261A receive power at the same time.

See Note A

Ref. NL205-E 4 - #- #- #18 See Note B 5 - #22 See Note C (up to 6 - #18)

1 - #18

See Note D

7 - #18 See Note D

LI388A

2 - #18 ZONE LIGHT

See Note B

LI387 LI387 LI387

NC205 Nurse Call System
DOME LIGHT DOME LIGHT 7 - #- #- #- #22

DOME LIGHT DOME LIGHT

DOME/ZONE LIGHT 7 - #- #- #- #22 IR260A Duty Station

4 - #- #- #- #22

SF330 SF337C SF340B SF250 SF330 SF337C SF340B
IR254 - IR259 Enhanced Staff and Patient Stations 3 - #- #22
IR254 - IR259 Enhanced Staff and Patient Stations 2 - #- #- #22
SF341B SF330 SF337C SF340B SF250

SF330 SF337C SF340B

EMERGENCY STATION
EMERGENCY STAFF EMERGENCY STAFF FIRE or FIRE or PRESENCE STATION PRESENCE SMOKE STATION SMOKE STATION STATION CONTACTS CONTACTS
CODE CALL EMERGENCY STAFF PRESENCE STATION STATION STATION
NC260B ----------- 24 VDC 4A NC262 ----------- 24 VDC 4A NC250/NC230 - 18 VDC 650mA NC255/NC235 -- 5 VDC 50mA PM261A ----------- 24 VDC 480mA IR250-IR260A -- 24 VDC 90mA LI388A ------------- 24 VDC 70mA SF250/340B/341B/330/337C ---------------- 24 VDC 4mA LI381/382/383/387 ---------------- 24 VDC 80mA SF100C ------- 24 VDC 60mA
Block Wiring Diagrams for Tek-DIGICARE
This Block Wiring Diagram is a subset of IL600 Rev. 25 - 01/2002, and is provided for quotation purposes only. Refer to the manual for complete wiring and installation instructions.
NC205 Nurse Call System block wiring diagram with enhanced stations & dome light conduit runs
Note A: Flasher Buss wires Note B: Station Common wires (Includes 1 twisted-shielded pair) Note C: Selective wire trunk Note D: Zone Buss wires Note E: Master Station wiring (4 #18 shielded & 4 #18)
Copyright TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
277 Industrial Park Road Franklin, North Carolina 28734 Phone (828) 524-9967 Fax (828) 524-Fairview St., Unit B-8 Burlington, ON L7L 4Y8 Canada Phone (905) 333-0051 Fax (905) 333-0599 Website: www.tektone.net Email: tektone@tektone.net Technical Assistance Email: teksupt@tektone.net
Observe all wire and pin NAMES when connecting equipment!!! All wire must be stranded. All wire numbers are minimum AWG sizes. Refer to NL205-H for maximum wiring distances and standard wire colors. NOTE: Fire indication at the nurse master station is supplementary only. The NC205 system is not intended for use as a fire alarm evacuation system.

( 1 of 4 shown )

NC255/235 MASTER EXPANDER

Wallplate

8 - #22
NC205 Nurse Call System block wiring diagram with standard stations & dome light conduit runs

NC250/230

See Note E
NC260B 4 - #18 plus 4 - #18 shielded CENTRAL EQUIPMENT
25 - #22 shielded 1 - #14

NC262 EXPANSION

Modular Cables Provided

7 - #18

Ref. NL205-E

5 - #- #22 See Note C

3 - #18
8 - #18 See Note A See Note B

ZONE LIGHT

See Note A See Note B

LI382 LI382

DOME LIGHT
DOME LIGHT 8 - #- #22 IR250 - IR253 Standard Staff and Patient Stations 5 - #- #22
DOME/ZONE LIGHT 10 - #- #22 IR260A Duty Station

4 - #- #22

FIRE or EMERGENCY STATION SMOKE CONTACTS
NC205 Nurse Call System block wiring diagram with enhanced stations & conduit runs to stations
25 - #22 shielded 1 - #- #- #18

1 - #- #18

PK261A Dome Light Power Supply
1 - #18 Ref. NL205-E 4 - #- #- #18 See Note B 5 - #22 See Note C

(up to 6 - #18)

DOME/ZONE LIGHT 5 - #- #18

4 - #22

IR254 - IR259

2 - #22

Enhanced Staff and Patient Stations

3 - #- #22

Enhanced Staff and Patient Stations 3 - #- #22

3 - #22

IR260A Duty Station
SF330 SF337C SF340B SF330 SF337C SF340B SF250
SF250 SF341B SF330 SF337C SF340B SF250
EMERGENCY STAFF FIRE or PRESENCE STATION SMOKE STATION CONTACTS

EMERGENCY STAFF FIRE or STATION PRESENCE SMOKE STATION CONTACTS
CODE CALL EMERGENCY STAFF STATION PRESENCE STATION STATION
25 - #22 shielded NC260B 1 - #14 CENTRAL EQUIPMENT 7 - #18
NC205 Nurse Call System block wiring diagram with standard stations & conduit runs to stations
MASTER STATION Modular Cables Provided
4 - #18 plus 4 - #18 shielded
Ref. NL205-E 5 - #22 See Note C

5 - #18

DOME/ZONE LIGHT 4 - #- #22 IR260A Duty Station
3 - #22 IR250 - IR253 Standard Staff and Patient Stations 5 - #- #22
EMERGENCY FIRE or STATION SMOKE CONTACTS

Tek-DOOR Door Answering Intercom System
Specification Sheets Submittal Package

as of 8/06/2002

Website: www.tektone.net Email: tektone@tektone.net For Technical Assistance: 1-800-332-6608 Technical Assistance Email: teksupt@tektone.net
Copyright 20012002 TekTone Sound & Signal Mfg., Inc., All rights reserved.
277 Industrial Park Road Franklin, NC 28734 (828) 524-9967 (800) 327-8466 Fax (828) 524-9968
No part of these publications may be copied without the express written permission of TekTone Sound & Signal Mfg., Inc. The contents of these specification sheets are furnished for informational use only, are subject to change without notice, and should not be construed as a commitment by TekTone Sound & Signal Mfg., Inc. TekTone Sound & Signal Mfg., Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this documentation. TekTone, the TekTone logo, Tek-Call, Tek-Care, Tek-Check-In, Tek-Com, Tek-Digicare, Tek-Door, Tek-Entry III, Tek-Guard, Tek-Micro, Tek-Micro II, Tek-MMARS II, Tek-NIOS, Tek-NIOS II, Tek-Paging, Tek-Phone, Tek-Safe, Tek-Select II, Tek-Sentry, Tek-Sound, Tek-Status and Tek-View are either registered trademarks or trademarks of TekTone Sound & Signal Mfg., Inc. in the United States and/or other countries. All other trademarks are the property of their respective owners.
4190 Fairview St., Unit B-8 Burlington, ON L7L 4Y8 Canada (905) 333-0051 Fax (905) 333-0599
Tek-DOOR SM201B Intercom Master Station Specification Sheet

FEATURES

IL742 Section B

Rev. 0 - 07/2001

The SM201B Intercom Master Station is a multi-purpose two-station intercom for use in homes, gates, offices, or wherever communication to a single area is desired. The SM201B has a white ABS plastic faceplate, and is designed for surface mounting. When the remote stations button is pressed, the SM201B sounds a tone and goes into LISTEN mode. Conversation is controlled at the SM201B by pressing the TALK/LISTEN button. The unit stays in LISTEN mode until the MONITOR/OFF button is pressed, allowing a childs room or other location to be monitored. The DOOR OPEN button will unlatch a door if an electric door strike is installed (use TekTones PO001 door strike).

TekTone

MON LISTEN
Simple push button operation Electric door strike release capability 2-wire connection from master to remote Monitor mode Hands-free reply

SM201B

Dimensions:

SPECIFICATIONS

Height: 6-7/8" (175 mm) Width: 5" (127 mm) Depth: 1-3/16" (30 mm) Lightly textured white ABS plastic Replaceable push buttons with selfwiping contacts 2-1/2" (64 mm) 45-ohm
ARCHITECTS AND ENGINEERS SPECIFICATION
Intercom master station shall be TekTone SM201B or approved equal and shall allow for connection to one remote station. It shall include momentary TALK/LISTEN, MONITOR/OFF and DOOR OPEN buttons. The unit shall be constructed of white ABS plastic and shall be surface or desk mounted. A 2-1/2" 45-ohm speaker/microphone shall be used for clear voice reproduction. Screw terminals shall be provided for electrical connections and shall be marked on the circuit board to aid in proper connection. The system shall require a single #22 twisted pair cable between the SM201B and the remote station.
Surface finish: Controls: Speaker/Mic:

REQUIRED COMPONENTS

IR510B, OR502, OR502S, Remote Station OR510, OR510S, OR610 -or- OR610W SS102A -or- SS105B PO001 Hard-wired Transformer Plug-in Transformer Electric Door Strike (optional)
Also available in 2 kits: SM201Kincludes SM201B, OR610 and SS102A SM201KPincludes SM201B, OR610 and SS105B
277 Industrial Park Road Franklin, North Carolina 28734 Phone (828) 524-9967 Fax (828) 524-Fairview St., Unit B-8 Burlington, ON L7L 4Y8 Canada Phone (905) 333-0051 Fax (905) 333-0599 Website: www.tektone.net Email: tektone@tektone.net Technical Assistance Email: teksupt@tektone.net
IR510B Indoor Remote Station Specification Sheet

IL716 Section B

Rev. 1 - 03/2000
The IR510B provides for CALL capabilty and two-way, hands-free communication to inside master stations. Designed for flush mounting, indoor applications, the unit provides natural, clear voice communication, simple push button operation and hands-free reply. The station is ideal for indoor use in office, plant, warehouse, or retail applications. The operation of the station is simple and efficient. The caller causes an audible/visible signal on associated indoor masters by pressing the call button. The identity of the calling station (depending on master station) may be visible by way of indicator light. The IR510B Indoor Remote Station is used with the SM201B and SM400 Series Master Stations. The unit requires 2-conductor wiring for operation. Simple push button operation Hands-free reply Modern styling Clear voice quality 2-wire connection

IR510B Indoor Remote Station
Dimensions: Height: 6-7/8" (175mm) Width: 5" (127mm) Depth: 0.5" (13mm) lightly textured Single, replaceable push button with self-wiping contacts 2-1/2" (64mm)
Surface Finish: Controls:
Indoor remote station shall be a TekTone IR510B or approved equal. It shall include a momentary action push button for CALL operation. The unit shall be constructed of ABS plastic and shall include a 16-ohm, 2-1/ 2" speaker designed for indoor use. Screw terminals shall be provided for electrical connections. These terminals shall have letter designations on the cirucuit board to aid in proper connection.

Speaker/mic:

IH101/IH102 PK400 SM400 Series -orSM201B SS106 Housing or ring Power Supply (for use with SM400 Series) Master Station Master Station Transformer
277 Industrial Park Road Franklin, North Carolina 28734 Phone (828) 524-9967 Fax (828) 524-Fairview St., Unit B-8 Burlington, ON, Canada L7L-4Y8 Phone (905) 333-0051 Fax (905) 333-S. Killian Drive Lake Park, Florida 33403 World Wide Web Site: www.tektone.net Email: tektone@tektone.net Technical Assistance Email: teksupt@tektone.net
OR501B, OR502, OR510 Outdoor Remote Stations Specification Sheet

IL438 Section B

Rev. 9 - 04/2002
The OR501B, OR502 and OR510 Outdoor Remote Stations provide call capability and two-way, hands-free communication to inside master stations for a variety of TekTone systems. Used typically as outside door stations, the OR501B, OR502 and OR510 are rugged, dependable units designed to provide natural, clear voice communication, simple push button operation, and hands-free reply. The stations are ideal for outdoor use in office, home, plant, warehouse, retail business, penitentiary and similar applications. OR502 Stations provide vandal-resistant features for those applications requiring additional station security. Operation of the stations is simple and efficient. Pressing the call button causes an audible or audible/visual signal (depending upon system in use) at the inside master station location. The identity of the caller may then be determined and entry to the home or building permitted, if so desired, and if system in use permits.

OR501B, OR510

Simple push button operation Hands-free reply Vandal-resistant construction (OR502) Clear voice quality
Outdoor remote stations shall be TekTone models OR501B, OR502, OR510, or approved equal. The stations shall be constructed of a rugged extruded aluminum panel with a momentary action push button switch for call placement. The speaker/microphone shall be 3.5" Mylar with voice frequency response for model OR502. Speaker/ microphone for models OR501B and OR510 shall be 2.5" with voice frequency response. Models OR501B and OR510 shall include push button and speaker grill constructed of durable ABS plastic. Model OR502 shall include aluminum plunger for push button actuation, and louvered panel for additional vandal protection. Screw terminals shall be provided for electrical connections.

Dimensions: Height: 6.875" Width: 5" Depth: 1.25" Construction: OR501B/OR510Rugged extruded aluminum panel with ABS plastic grill and push button. OR502Rugged extruded aluminum panel with louvers and aluminum push button actuator. Finish: Brushed aluminum Push button: Individually replaceable type with selfwiping contacts.
OR501B: Tek-DIGICARE (NC205), or Tek-CALL (NC150), or Tek-COM (IR704B/D) Systems. OR502: Tek-COM (IR704B/D) System. OR510: Tek-SELECT II (SM400 Series), or TekDOOR (SM201B) Systems.
OR501S, OR502S, OR510S Outdoor Remote Stations Specification Sheet

IL560 Section B

Rev. 3 - 05/2002
The OR501S, OR502S and OR510S Surface Mount Outdoor Remote Stations provide call capability and twoway, hands-free communication to inside master stations, for a variety of TekTone systems.

TekTone TekTone

OR501S, OR510S
Typically used as outside door stations, these are rugged, dependable units designed to provide natural, clear communication, simple push button operation, and handsfree reply. The stations are ideal for outdoor use in office, home, plant, warehouse, retail business, penitentiary, and similar applications. The OR502S is vandal resistant for applications that require additional security. Operation of the stations is simple and efficient. Pressing the call button causes an audible or audible/visual signal (depending upon system in use) at the inside master station location. The identity of the caller may then be determined and entry to the home or building permitted, if so desired, and if system in use permits. Simple push button operation Hands-free reply Vandal-resistant construction (OR502S) Surface mount with no housing

OR502S

Outdoor remote stations shall be TekTone OR501S, OR502S, OR510S, or approved equal. The stations shall be surface mounted with no additional housing required, and shall include a gasket material to provide resistance to weather exposure. The stations shall be constructed of a rugged extruded aluminum panel with a momentary action push button switch for call placement. End-caps for the panel shall be molded of durable ABS plastic. The speaker/ microphone shall be 45 ohm, 2.5" (64 mm) Mylar, with voice-frequency response. Models OR501S and OR510S shall include a push button and a speaker grill molded of durable ABS plastic. Model OR502S shall include an aluminum plunger for push button actuation, and a louvered panel for additional vandal protection. Screw terminals shall be provided for electrical connections.
Dimensions: Height: 7.25" (184 mm) Width: 4.9" (124 mm) Depth: 1.5" (38 mm) Construction: OR501S, OR510SExtruded aluminum panel with ABS plastic grill and push button. OR502SExtruded aluminum panel with louvers and aluminum push button actuator. Finish: Brushed aluminum. Push Button: Individually replaceable type with selfwiping contacts.
OR501S, OR502S: Tek-COM OR510S: Tek-SELECTII -orTek-DOOR Home Intercom System Intercom System Door Answering Intercom

OR610, OR610W Intercom Remote Station Specification Sheet

IL743 Section B

The OR610 and OR610W Outdoor Remote Stations are designed for use in homes, gates, offices, or wherever communication from a single area is desired. The OR610 has a woodgrain ABS plastic faceplate, while the OR610W has a white ABS plastic faceplate. Both are designed for surface mounting. When the CALL button is pressed at the OR610 or OR610W remote station, a tone is sounded at the master station, and the remote station goes into TALK mode. Conversation is controlled at the master station by pressing its TALK/LISTEN button. Simple push button operation 2-wire connection from remote to master Monitor mode Hands-free reply
SPECIFICATIONS OR610, OR610W
Dimensions: Height: 5-1/4" (132 mm) Width: 4" (100 mm) Depth: 1" (25 mm) Lightly textured woodgrain or white ABS plastic Replaceable push button with self-wiping contacts 2-1/2" (64 mm) 16-ohm Mylar
Surface finish: Controls:
Outdoor remote station shall be TekTone OR610, OR610W or approved equal and shall allow for two-way voice communication with master station. It shall include a momentary action push button for CALL operation. The unit shall be constructed of woodgrain (OR610) or white (OR610W) ABS plastic and shall be surface mounted. A 2-1/2" 16-ohm Mylar speaker/microphone shall be used for clear voice reproduction and weather resistance. Screw terminals shall be provided for electrical connections and shall be marked on the circuit board to aid in proper connection. The system shall require a single #22 twisted pair cable between the remote station and the master station.

Speaker/Mic:

SM201B SS102A -or- SS105B PO001 Master Station Hard-wired Transformer Plug-in Transformer Electric Door Strike (optional)
SS102A, SS105B, SS106 Transformers SS250 Transformer PO001 Electric Door Opener Specification Sheet

IL127 Section A

Rev. 9 - 07/2000
SS102A SS106 SS102A, SS106 TRANSFORMERS
TekTones SS102A and SS106 Class 2 Transformers offer compact, easy-to-install low voltage AC power sources for use with various TekTone intercom systems. Both transformers are UL Listed and will safely take themselves off line when overheated. The transformers are constructed for easy installation in a standard 1/2" knockout or for surface installations, and may be used in plastic or metal boxes. Primary wire connections are made using the pre-stripped pigtails and ground wire; secondary connections are made using screw terminals. SPECIFICATIONS SS102A 120 VAC primary 16 VAC 10 VA secondary SSVAC primary 8 VAC 20 VA 16/24 VAC 30 VA secondary

SS250 TRANSFORMER

TekTones SS250 Power Transformer provides a low-voltage power source for use with the Tek-VIEW Video Intercom System. The transformer provides holes for surface mounting and features enclosed connections. Primary wire connections are made using pigtails; secondary connections are made using screw terminals. SS250 SPECIFICATIONS 16 VAC 250 VA secondary (used in video intercom application)
DIMENSIONS Faceplate: 1-1/4" x 5-7/8" (31.8mm x 149mm) Case width: 15/16" (24mm) Case depth: 1-7/16" (37mm) Latch: 1-3/8" opening (35mm)

SS105B

SPECIFICATIONS 117-16 VAC 10 VA Plug-in type; UL Listed
PO001 ELECTRIC DOOR OPENER SS105B TRANSFORMER
TekTones SS105B Class 2 Plug-In Transformer was designed for quick and easy installation in environments where pigtail-type transformers are impractical or unsightly. It is particularly suitable for use in office or home installations, or in areas where the transformer must be exposed. The plug-in installation saves time and money over standard transformer installation requiring hand wiring and long runs from hard-to-get-at areas. TekTones unit installs quickly and easily to existing outlets and includes an extra long replacement screw for secure attachment to a faceplate. TekTones PO001 Electric Door Opener is for use in unlocking and locking doors from a variety of TekTone remote stations. The door opener can be installed in place of the door lock, or on a door jamb with various door lock sets. The PO001 is a normally locked type with heavy duty coils, and operates on 8-16 VAC or 3-6 VDC. The unit features a flat face with satin zinc finish and solid brass locking latch for long wear. Model PO001 is reversible for mortise-type locks and latches up to 1/2" width and throw and is ideal for most narrow jamb mortise-type installations. Depending on the specific job requirements, the PO001 can be reversed for right or left-hand door installation.
IL312 Housings Reference Chart

Rev. 13 - 12/2001

Model # IR100B IR102C IR103C IR104C IR105C IR141P IR141U IR143P IR203C IR204C IR205C IR207B IR510B IR704B/BD OR101 OR500 Series OR600 Series SM201B SM201K/P SM401 SM404 SM406 SM411 VM104

IH101 backbox (flush)

IH102 ring (flush)

IH110R ring (flush)

IH357 ring IH358 box (flush)

IH400A housing (desk)

IH401 housing (desk)
use standard 2-gang electrical box use standard 1-gang electrical box use standard 1-gang electrical box
NOTES: 1. For SF Series Emergency Switches, use single gang ring, or single gang ring and double gang box IH357/ IH358. 2. For LI Dome Light Series, use double gang ring (or double gang ring and box). 3. For AM and CM Series, see specification requirements. 4. For IR300 Series Nurse Call Stations and IR345B/IR145B Tek-CHECK-IN Stations, for IR250IR260A Series use IH352/IH353 or exact equivalent. 5. For IR150B Series, use IH352/IH353. If space is limited use ARC-CO 2GBD/3GC.

Dimension and Finish ChartHousings, Frames, Desk Cabinets
Flush Mount Housings Frames
Model# IH101 IH102 IH110R OH191 OH192 OH193 OH194 OH195 OH196 OH197 OH198 OH199 OH1910 OH201 OH202 OH203 OH204 OH205 OH206 OH207 OH208 OH209 OH210 OH150
Overall Width 4" 4-3/4" 8-1/4" 4-3/8" 8-3/8" 12-3/8" 16-3/8" 20-3/8" 24-3/8" 28-3/8" 32-3/8" 36-3/8" 40-3/8" 5-3/8" 9-3/8" 13-3/8" 17-3/8" 21-3/8" 25-3/8" 29-3/8" 33-3/8" 37-3/8" 41-3/8" 5-1/4"
Wall Cutout Width 4-1/4" 4-1/4" 8" 4-1/2" 8-1/2" 12-1/2" 16-1/2" 20-1/2" 24-1/2" 28-1/2" 32-1/2" 36-1/2" 40-1/2" 4-1/2" 8-1/2" 12-1/2" 16-1/2" 20-1/2" 24-1/2" 28-1/2" 32-1/2" 36-1/2" 40-1/2" 4-1/2"
Overall Height 5-1/2" 6" 5-7/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 17-1/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 16-7/8" 11-1/8"
Wall Cutout Height 5-3/4" 5-5/8" 5-5/8" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 17-1/4" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 16-1/8" 10-5/8"
Overall Depth 1-3/4" 1/2" 1-3/4" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8" 3-7/8"
Model # OF191 OF192 OF193 OF194 OF195 OF196 OF197 OF198 OF199 OF1910 Height: Depth: OF201 OF202 OF203 OF204 OF205 OF206 OF207 OF208 OF209 OF210 Height: Cutout: Depth:
Width Wall Cutout 6-1/4" 10-1/4" 14-1/4" 18-1/4" 22-1/4" 26-1/4" 30-1/4" 34-1/4" 38-1/4" 42-1/4" 19" (overall) 7/8" 6-1/4" 4-1/2" 10-1/4" 8-1/2" 14-1/4" 12-1/2" 18-1/4" 16-1/2" 22-1/4" 20-1/2" 26-1/4" 24-1/2" 30-1/4" 28-1/2" 34-1/4" 32-1/2" 38-1/4" 36-1/2" 42-1/4" 40-1/2" 17-3/4" (overall) 15-7/8" 2-1/2"

Surface Mount Housings

Surface Mount Frames

Desk Cabinets

Model # OH301 OH302 OH303 OH304 OH305 OH306 OH307 OH308 Height: Depth:
Width 6-1/8" 10-1/8" 14-1/8" 18-1/8" 22-1/8" 26-1/8" 30-1/8" 34-1/8" 17-3/4" 3-5/8"
Model # OF190S OF191S OF192S OF193S OF194S OF195S OF196S OF197S OF198S OF199S OF1910S
Width 4-1/4" 6-1/4" 10-1/4" 14-1/4" 18-1/4" 22-1/4" 26-1/4" 30-1/4" 34-1/4" 38-1/4" 42-1/4"

Height 19-3/4" 19" 19" 19" 19" 19" 19" 19" 19" 19" 19"
Depth 1-1/2" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4"
Model # *IH302 *IH303 *IH304 *IH305 *IH306 IH400A (white)
Width 9-1/2" 13-1/2" 17-1/2" 21-1/2" 25-1/2" 5"
Height 6" 6" 6" 6" 6" 7"
IH401 7-1/8" 9-1/4" *Cabinet Assembly Only
NOTE: The last two digits of frame and housing model numbers indicate the number of gangs (i.e., panel capacity). Exceptions: IH101IH110R.