Data sheet SYN 161 d

Article number: 1610011
TIME Analogue time switches

SYN 161 d

Description
Analogue time switch 1 channel Daily program Without power reserve 96 switching segments Synchronised with mains Shortest switching time: 15 minutes Clock hands for time display and in addition 12/24 hour recognition Simple summer/winter time correction
Time can be changed clockwise or anti-clockwise DuoFix spring terminals For 2 conductors each Wire or strand (with or without wire end sleeve) Wire diameter: 0.5 - 2.5 mm Button for releasing plug-in connection Switching preselection Manual switch with 3 positions: Continuous ON/AUTO/continuous OFF Switching status display

Technical data

Operating voltage Frequency Number of channels Program Width Installation type Type of connection Drive Program Switching capacity at 250 V AC, cos = 1 Switching capacity at 250 V AC, cos = 0,6 Shortest switching times Programmable all Time accuracy Type of contact Switching output Number of switching segments Stand-by consumption Test approval Housing and insulation material Type of protection Protection class Ambient temperature 230 V AC 50 Hz 1 Daily program 3 modules DIN rail DuoFix spring terminals Synchronous motor Daily program 16 A 4A 15 min 15 min Synchronised with mains Changeover contact Potential-free and phase-independent VA VDE High-temperature resistant, self-extinguishing thermoplastic IP 20 II as per EN 60 730-1 -20 C+55 C
additional information at: www.theben.de/product/1610011
As at: 09.06.2011 Page 1 of 2

Scale drawings

Connection example

Accessories

Wall mounting kit 52,5 mm

Front panel kit

Article number: 9070050

Details www.theben.de

Article number: 9070001
As at: 09.06.2011 Page 2 of 2

theben-eltimo 020 S DCF

Program Weekly program Number of channels Quartz/DCFV AC theben-eltimo 020 S DCF 0200300 Memory locations 36 Time based on Quartz Operating voltage 230 V AC Type theben-eltimo 020 S Article number 0200000
theben-eltimo 020 S Operating voltage Frequency Installation type Power reserve
theben-eltimo 020 S DCF 230 V AC 50 Hz Socket (plug-in) 20 days
16 A 2A 3500 W 1 min 1 s/day (Quartz) 5 VA IP 20 II for housing, I for plug system as per EN 62 730-1 -10 Cbb+40 C 1 s/day (Quartz) or DCF77 synchronous
theben-eltimo 020 S, theben-eltimo 020 S DCF

64,41,3

TIME Analogue time switches

Number of channels

Type of contact

Power reserve

Shortest switching time

Programmable every

Connection type
Daily program Weekly program NO contact NO contact 3 days 3 days 15 min 15 min 2h 15 min 15 min 2h Screw terminals Screw terminals Screw terminals SYN 160 a SUL 180 a MEM 190 a 32
60 minute program Daily program Weekly program 1 changeover contact changeover contact changeover contact 200 hours 200 hours 37.5 s 15 min 15 min 2h 37.5 s 15 min 15 min 2h Spring terminals Spring terminals Spring terminals Spring terminals SYN 151 h SYN 161 d SUL 181 d SUL 191 w 34 34

Daily program

changeover contact

3 days

30 min

Screw terminals

SUL 181 h

60 minute program

changeover contact changeover contact changeover contact

2 changeover contacts

3 days 3 days 3 days 3 days
2 min 30 min 30 min 4h 30 min 45 min/12 h
37.5 s 15 min 15 min 1h 30 min 45 min/12 h
Screw terminals Screw terminals Screw terminals Screw terminals Screw terminals Screw terminalss
TM 178 h SYN 168 h SUL 188 h MEM 198 h SUL 188 g SUL 188 hw
Daily program Weekly program Daily program Daily program and 1/2 day OFF function
Daily program Daily program 2
15 min 15 min 20 min/2 h 20 min/2 h 20 min/2 h 20 min/2 h 1.25 min 30 min/12 h
15 min 15 min 5 min, 30 min 5 min, 30 min 5 min, 30 min 5 min, 30 min 18.5 s 15 min/12 h
Screw terminals Screw terminals Screw terminals Screw terminals Screw terminals Screw terminals Screw terminals Screw terminals
SYN 169 s SUL 189 s SYN 269 h SYN 269 g SUL 289 h SUL 289 g TM 179 h SUL 189 hw
changeover contact changeover contact
3 days 3 days 3 days 3 days
Daily program and 1/2 day OFF function
1 Daily program 2 changeover contact

6 days 6 days

20 min 20 min

5 min 5 min

Installation typec Channel Operating voltage Colour pure white, (similar to RAL 9010) Ceiling installation Light | Presence 230 V AC pure black, (similar to RAL 9005) Silver (similar to RAL 9006) further colours on request Type compact passage compact passage BK compact passage SR Article number 2010807
compact passage Operating voltage Frequency Setting range Recommended installation height Light switch-off delay Presence switch-off delay Presence switch-on delay Light contact type 230 V AC 50 Hz 101500 lx 23.5 m Impulse (0.5 s), 10 s20 min 10 s120 min 0 s10 min Relay 230 V Compact and ourescent lamps Presence contact type Switching capacity Presence Ambient temperature Protection rating Resistive load Incandescent and halogen lamp load 1400 VA 1200 W 10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W) Floating relay 50 W (220 V DC), 50 VA (250 V AC) minimal 0.5 mV/10 mA +0 C bb+50 C IP 40
Detection area (rectangular)
Installation height (A) 2m 2.5 m 3m 3.5 m Head on to (r) 56 m | 16 m x 3.5 m 1 m 72 m | 18 m x 4.0 m 1 m 90 m | 20 m x 4.5 m 1 m 100 m | 20 m x 5.0 m 1 m Diagonally (t)
105 m | 30 m x 3.5 m 1 m 120 m | 30 m x 4.0 m 1 m 135 m | 30 m x 4.5 m 1 m 150 m | 30 m x 5.0 m 1 m

40 102,5 26,60

compact passimo
Passive infrared presence detector (PIR) Rectangular detection area for storage areas with clear demarcation vertically below the presence detector Mixed light measurement Automatic control of lighting and HVACas well as room monitoring function Lighting control with light threshold value and self-learning switch-off delay Light switch output (relay, 230 V) Presence switch output (relay, oating) Choice of fully or semi automatic operation Sensor or switch options for manual switching Fully or semi-automatic: In "Fully automatic" mode, the lighting switches on and off automatically according to presence and light. In "Semi automatic" mode, it must be switched on manually and switches off automatically Device can be connected as master or slave
Pulse function for staircase timer HVAC control with switch-on delay and switch-off delay Presence switch contact for HVAC control: The switching behaviour of the oating contact is only controlled by presence The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay The sensitivity of the presence switch output is reduced in the "monitoring" position. The contact indicates the presence of people with a high degree of certainty Test operation mode checks the detection area and installation The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus A maximum of 10 detectors can be switched at the same time

Installation height (A) 2m 2.5 m 3m 3.5 m 4.0 m Sitting (B) 20 m | 4.5 m x 4.5 m 36 m | 6.0 m x 6.0 m 49 m | 7.0 m x 7.0 m 64 m | 8.0 m x 8.0 m Walking (C)
36 m | 6.0 m x 6.0 m 0.5 m 64 m | 8.0 m x 8.0 m 0.5 m 81 m | 9.0 m x 9.0 m 0.5 m 100 m | 10.0 m x 10.0 m 1 m 121 m | 11.0 m x 11.0 m 1 m

QuickFix round cover

QuickFix square cover

Surface frame ECO-IR 360

Additional accessories s. p. 232
Art.No.: 9070517 Page 233 Details
Art.No.: 9070518 Page 232 Details
Art.No.: 9070512 Page 232 Details
QuickFix concrete round cover Page 232 Details QuickFix concrete square cover Page 233 Details QuickFix concrete ushmounted box Page 233 Details QuickFix concrete ushmounted housing Page 233 Details QuickSafe Page 233 Details

37,5 95

ECO-IR 360C NT
Passive infrared presence detector (PIR) Square detection area Genuine daylight measurement The square detection area allows accurate and simple planning Light switch output (relay, 230 V) Presence switch output (relay, oating) Automatic control of lighting and HVAC as well as room monitoring function Lighting control with light threshold value and self-learning switch-off delay Choice of fully or semi automatic operation Sensor or switch options for manual switching Pulse function for staircase timer HVAC control with switch-on delay and switch-off delay Inrush current limitation for EB
Fully or semi-automatic: In "Fully automatic" mode, the lighting switches on and off automatically according to presence and light. In "Semi automatic" mode, it must be switched on manually and switches off automatically The presence detector has "Genuine light measurement" and is only suitable for switching uorescent lamps (FL/PL). The sensitivity of the presence switch output is reduced in the "monitoring" position. The contact indicates the presence of people with a high degree of certainty Device can be connected as master or slave Test operation mode checks the detection area and installation A maximum of 10 detectors can be switched at the same time
Installation type Channel Operating voltage Colour pure white, (similar to RAL 9010) Ceiling installation Light | Presence 230 V AC pure black, (similar to RAL 9005) Silver (similar to RAL 9006) further colours on request Type ECO-IR 360C NT ECO-IR 360C NT BK ECO-IR 360C NT SR Article number 2020813

Installation type Channel Operating voltage Colour pure white, (similar to RAL 9010) Ceiling installation 2 x Light 230 V AC pure black, (similar to RAL 9005) Silver (similar to RAL 9006) further colours on request Type ECO-IR DUAL-C NT ECO-IR DUAL-C NT BK ECO-IR DUAL-C NT SR Article number 2020816
ECO-IR DUAL-C NT Operating voltage Frequency Setting range Recommended installation height Light switch-off delay Light contact type Maximal load Compact and ourescent lamps Ambient temperature Protection rating 230 V AC 50 Hz 101500 lx 23.5 m 10 s20 min Relays 230 V, inrush current limitation 1400 VA (total both contacts) 16 x (1 x 58 W), 8 x ( 2 x 58 W), 24 x (1 x 36 W), 12 x (2 x 36 W), 24 x (smaller than 36 W) +0 C bb+50 C IP 40

PlanoCentro

product design award 2010
Passive infrared presence detector (PIR) Square 360 detection range allows accurate and simple planning Flush design Exchangeable cover according to shape, colour and material Mixed light measurement Presence and brightness-dependent control for lighting and HVAC systems Choice of fully or semi-automatic lighting control Connection option for sensors or switches for manual switching with automatic recognition Adjustable sensitivity Can be congured remotely 6 predened basic settings on presence detector Lighting control with light threshold value and self-learning switch-off delay Pulse function for staircase timer Presence output with switch-on delay and switch-off delay Parameters can be selected for subsequent changes
Fully or semi-automatic: In "Fully automatic" mode, the lighting switches on and off automatically according to presence and light. In "Semi automatic" mode, it must be switched on manually and switches off automatically Test operation mode checks the detection range and conguration A maximum of 10 detectors can be switched at the same time For ceiling installation (false ceilings) With installation for false ceilings and cover Slave-Version for PlanoCentro 101-EWH Just to be used with PlanoCentro 101-EWH as Master For ush-mounting (concrete ceiling) With metal installation frame for screwed xing in wooden ceilings or in ush-mounted sockets, incl. cover Slave-Version for PlanoCentro 101-EWH Just to be used with PlanoCentro 101-EWH as Master

PlanoCentro 101-EWH

SPHINX 105-110 Fluorescent lamp load not corrected Flourescent lamp load parallel-corrected Flourescent lamp load series-corrected Flourescent lamp load Compact energy saving lamps Ambient temperature Protection class Protection rating conventional ballast, electronic ballast
SPHINX 105-VA 400 VA 900 VA 400 VA
9 x 7 W, 7 x 11 W, 7 x 15 W, 7 x 20 W, 7 x 23 W 25 Cbb+55 C II in accordance to EN 60 669-2-1 IP 55

,5 m m m

5m 10 m 30 m

SPHINX RC 105

SPHINX RC 105 Pro

SPHINX corner angle

Art.No.: 9070539 Page 235 Details
Art.No.: 9070537 Page 235 Details
Art.No.: 9070535 Page 235 Details
Installation type Ceiling installation, ush-mounted
Small, inconspicuous passive infrared motion detector (PIR) Ceiling installation for suspended ceilings Automatic lighting control based on presence and brightness Mixed light measurement suitable for the control of uorescent, incandescent and halogen lamps Sensor head can be adjusted downwards by 45 in 15 stages thus allowing detection area to be changed to avoid switching the device on unnecessarily Ceiling cut-out of 6568 mm diameter Easy installation via two clamping brackets System consists of power box and sensor with plugged connection cable Sensor can easily be removed during painting work Large clamping area for quick installation
Single-handed plug-in installation with unloosable screws Instant start-up possible via factory preset No unintentional adjustment due to covered up controls Adjustable brightness switching value and switch-off delay Sensitivity can be reduced to limit detection area Impulse function Test function 1 channel 2 channel 2. Relay for HVAC control with adjustable switch-off delay, presence-dependent, potential-free

LUXA 103-360

LUXA 103-360/2
Installation type Detection angle Channel Light Ceiling installation 360 Light | Presence 1000 W 230 V AC LUXA 103-360/Incandescent lamp load Operating voltage Type LUXA 103-360 Article number 1030010
LUXA 103-360 Operating voltage Frequency Power consumption Setting range Number of channels Switching capacity light Presence switching capacity Detection angle Recommended installation height Light switch-off delay Presence switch-off delay Incandescent lamp load Flourescent lamp load parallel-corrected Ambient temperature Protection class Protection rating conventional ballast 1000 W 400 VA +0 Cbb+45 C II in accordance to EN 60 669-2-1 Sensor IP 40, power unit IP 10 A (at 230 V AC, cos m 5 s20 min 10 s/15 min/30 min/60 min (innitely variable) = 1), 3 AX (at 230 V AC, cos 5 A (cos 230 V AC 5060 Hz 8 VA 102000 lx 2 = 0.3) LUXA 103-360/2

= 1) 250 V AC or 24 V DC

3, m m

RAMSES 784 S, RAMSES 722 S, RAMSES 782 S
Actuator ALPHA V Page 238 Details Adapter RAMSES 72x/78x Page 236 Details
RAMSES 722 S, RAMSES 782 S

Clock thermostat

Analogue clock thermostat - tappet

RAMSES 784 RAMSES 721

Analogue clock thermostat with a low prole design for time-dependent monitoring and control of room temperature. Operating point and electronic recirculation are set from the front Party switch and program display Electronic temperature control Normal and reduced temperature can be set separately Selector switch for operating mode: continuous reduced temperature, continuous normal temperature, automatic mode, frost and plant protection +6 C With batteries for 2 or 3 conductor connection Battery monitoring with battery replacement indicator via ashing LED Silting and pump protection function (option)
Quartz mechanism Tappet program disc with daily or weekly program Mains version Selector switch for operating mode: continuous reduced temperature, continuous normal temperature, automatic mode, frost and plant protection +6 C Tappet program disc with daily or weekly program Synchronous motor drive Mains version Selector switch for operating mode: continuous reduced temperature, continuous normal temperature, automatic mode, frost and plant protection +6 C Tappet program disc with daily or weekly program Quartz mechanism, 3 day power reserve

RAMSES 721

RAMSES 722
Mains version Reduced temperature approx. 5 K lower in relation to the set comfort temperature Tappet program disc with daily program Synchronous motor drive

RAMSES 725

Like RAMSES 722, however:

RAMSES 784

Central control of reduced temperature as per time program

RAMSES 782

Power reserve Connection type 2/3 conductors 3/4 conductors 3 days 3/4 conductors Daily/weekly program Daily/weekly program Daily program 3/4 conductors Daily/weekly program Two way switch +10 Cbb+30 C 230 V AC RAMSES Two way switch Two way switch Two way switch +10 Cbb+30 C +10 Cbb+30 C +10 Cbb+30 C 230 V AC 230 V AC 230 V AC RAMSES 722 RAMSES 782 RAMSES Program Daily/weekly program Type of contact Two way switch Setting range +10 Cbb+30 C Operating voltage 2 AA batteries Type RAMSES 784 Article number 7840030
RAMSES 784 Operating voltage Frequency Type of contact Program Max. switching capacity Switching differential Switch output Setting range Shortest switching time Programmable every Time accuracy Power reserve Display Type of protection Protection class 1 LED-Battery monitoring IP 20 II in accordance with EN 60 730-1 1 s/day (Quartz) 20 min, 120 min 5 min, 30 min Synchronised with mains 1 s/day (Quartz) 3 days 1 LED Heating 0.41.2 K Daily/weekly program 6 A (at 250 V AC, cos 01.2 K 2 AA batteries 50 Hz 5060 Hz Two way switch Daily program = 1), 1 A (at 250 V AC, cos 0.41.2 K Floating +10 Cbb+30 C 20 min 5 min 20 min, 120 min 5 min, 30 min = 0.6) 1.5 K Daily/weekly program RAMSES 722 RAMSES V AC 50 Hz RAMSES 721 RAMSES 725

28 23,5
Art.No.: 9070212 Page 236 Details

N L1 L2

SYSTEMS KNX

Designation Type page

Actuators
Actuators C load 4-12 channels MIX 2 Actuators 8-24 channels MIX 2 Actuators C load 4-12 channels MIX 1 Actuators 4-12 channels MIX 1 Switch or blind actuators 4-16 channels RMG 4 I KNX/RME 4 I KNX RMG 8 S KNX/RME 8 S KNX RMG 4 C-Load KNX/RME 4 C-Load KNX RMG 4 S KNX/RME 4 S KNX RMG 8 KNX/RME 8 KNX 172

Dimming actuators

Control units 2-6 channels MIX 1 Universal dimming actuators 2-6 channels MIX 1 SMG 2 S KNX/SME 2 S KNX DMG 2 S KNX/ DME 2 S KNX/DMB 2 S KNX 173 174

Blind actuators

Blind actuators 4-12 channels MIX 1 Blind actuators 4-12 channels JMG 4 S KNX/JME 4 S KNX JMG 4 24V DC KNX/JME 4 24V DC KNX 176 177

Binary inputs

Binary inputs 6-18 channels MIX 1 Binary inputs for ush-mounted sockets BMG 6 KNX/BME 6 KNX TA 2 KNX/TA 4 KNX/TA 6 KNX 178 179
Heating and air conditioning control
multifunction display Room thermostat and individual room thermostat Heating actuators Motor-driven actuators CO2 Room air sensor Individual room thermostat Fan-Coil and Fan-Coil actuator VARIA 826 KNX/824 KNX RAMSES 770 KNX/713 S KNX/712 KNX HMG 4 KNX/HME 4 KNX/HMT 6 KNX/HMT 12 KNX CHEOPS control KNX/ CHEOPS drive KNX AMUN 716 KNX RAMSES 713 FC KNX/FCA 1 KNX 187 188
Presence and motion detectors
Motion detector Passive infrared presence detector SPHINX 331 KNX/332 KNX/105-300 KNX compact ofce EIB/compact passage KNX/compact passimo KNX/ECO-IR 180EIB-AC ECO-IR 360EIB-AC/ECO-IR DUAL-EIB 190 192
Weather station, brightness sensors
KNX weather stations Brightness sensors and temperature sensors KNX weather station/KNX weather station basic LUNA 130 KNX/131 KNX/133 KNX 200 201

Time switches

4 channel time switches with annual program 2 channel time switch with weekly program TR 644 S DCF KNX/TR 644 S KNX TR 612 S KNX 204 206

System devices

Time signal transmitter Supply voltage Interface and line coupler ZS 600 DF KNX Power supply 640 mA/320 mA/160 mA USB interface KNX/ line coupler KNX 209

Display units

KNX indoor clock OSIRIA 210

167 167

Switch actuators
Actuators C load 412 channels MIX 2

RMG 4 I KNX RME 4 I KNX

Q Q Q Q Q Q Q Q Q
4-way C load switching actuator MIX 2 With current recognition For higher lamp loads Up to two extension modules MIX 1 or MIX 2 can be connected to one basic module Device and KNX bus module can be swapped independently of each other Removable KNX bus module enables devices to be changed without reprogramming
Manual set-up and use of switching actuators is possible without KNX bus module LED switching status display for each channel Manual operation on device (even without bus connection) Switching functions: E.g. On/Off, pulse, On/ Off delay, staircase light with warning Logical links: e.g. lock, AND, release, OR

LED switching status display for each channel Manual switch with On/Off/Bus settings (also without bus voltage) Switching functions: e.g. On/Off, pulse, On/ Off delay, staircase light with warning Logical links: e.g. lock,AND, release, OR

RMG 4 C-Load KNX

Basic module MIX 1 Can be upgraded to maximum of 12 channels Extension module MIX 1 For upgrading to maximum of 12 channels

RME 4 C-Load KNX

Type RMG 4 C-Load KNX RME 4 C-Load KNX Article number 4910206 4910207
RMG 4 C-Load KNX Operating voltage KNX Operating voltage Power consumption Width Type of contact Bus voltage, (< 10 mA) 230 V AC, 50 Hz 2.5 VA 4 modules NO contact, 16 A (at 250 V AC, cos = 1), 16 A (at 250 V AC, cos = 0.6) 5 C+45 C IP 20 II in accordance with EN 60 730-1 RME 4 C-Load KNX
Ambient temperature Protection rating Protection class

KNX L N N L L L N N L L

Actuators 412 channels MIX 1

RMG 4 S KNX RME 4 S KNX

Q Q Q Q Q Q Q Q
4-way switching actuator MIX 1 Up to 2 extension modules can be connected to a basic module. Can be combined with all MIX 1 series devices Free combination of switches, dimming, blinds and heating control as well as binary inputs

RMG 4 S KNX

RME 4 S KNX
Type RMG 4 S KNX RME 4 S KNX Article number 4910204 4910205
RMG 4 S KNX Operating voltage KNX Operating voltage Power consumption Width Type of contact Ambient temperature Protection rating Protection class Bus voltage, (< 10 mA) 230 V AC, 50 Hz 2.5 VA 4 modules NO contact, 16 A (at 250 V AC, cos = 1), 10 A (at 250 V AC, cos = 0.6) 5 C+45 C IP 20 II in accordance with EN 60 730-1 RME 4 S KNX
Switch or blind actuators 416 channels

RMG 8 KNX RME 8 KNX

Q Q Q Q Q
4-way blind or 8-way switching actuator Flexible channel function selection: As switching actuator or for controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation aps Manual operation on device LED switching status display on device
Manual switch for Up/Down or for Switching On/Off (also without bus voltage) Optimised repetition accuracy of programmed lamella positions Slip correction when moving from bottom to top

Weather station KNX Weather station basic KNX

Weather station KNX

Combination sensor for measuring wind, rain, brightness and temperature Rain sensor with heater (with connection at 230 V AC) Brightness range from 1 - 100,000 lux Temperature range -20 C to + 55 C
Measurement and evaluation directly on device Sun protection for up to three facades possible (in combination with LUNA 133) Display of weather data, e.g. with VARIA multi-function display
Weather station basic KNX
Like weather station KNX, however:
Combination sensor for measuring wind, brightness and temperature Without rain sensor 230 V AC connection not required
Type KNX weather station Weather station KNX basic Article number 1329201 1329205
KNX weather station Operating voltage Operating voltage KNX Brightness measuring range Measuring range temperature Ambient temperature Protection class Protection rating 230 V AC Bus voltage, (< 10 mA) 1100000 lx 20 C+55 C 20 C+55 C II in accordance with EN 60 730-1 IP 44 Weather station KNX basic
Mast mounting weather station Page 239 Details

160 80

LUNA 130 KNX
3 channel brightness sensor For brightness-dependent controlling Threshold values, dimming levels and switch delay adjustable 3 threshold switches integrated Threshold can be set between 1 and 20,000 lux Behaviour adjustable if thresholds are exceeded or not met
Up to 4 different brightness levels can be monitored Choice of 1 - 100 lux or 100 - 20,000 lux measuring ranges 3 congurable thresholds Each section can be allocated one light setting consisting of 3 switching objects and 1 dimming object
Type LUNA 130 KNX AL Article number 1309200
LUNA 130 KNX AL Operating voltage KNX Brightness measuring range Switch-on delay Bus voltage, (< 10 mA) 120000 lx 8 s240 min Width Ambient temperature Protection rating 2 modules 5 C+45 C IP 20
Flush-mounted light sensor LUNA KNX
Art.No.: 9070247 Page 236 Details

LUNA 131 S KNX

Brightness and temperature sensor For brightness and temperature dependent controlling in outdoor areas 5 freely congurable channels: 1 sun protection channel and 4 universal channels Sun protection channel with automised sun protection specically for blind, awning and shutter applications
Universal channels allow linking of brightness and temperature Brightness range from 1 - 100,000 lux Temperature range -20 C to + 55 C Learning object for brightness threshold

Type LUNA 131 S KNX Article number 1319201
LUNA 131 S KNX Operating voltage KNX Brightness measuring range Measuring range temperature Bus voltage, (< 5 mA) 1100000 lx 25 C+55 C Ambient temperature Protection rating 25 C+55 C IP 54

50,5 81,5 57

LUNA 133 KNX
Brightness sensor For brightness dependent controlling in outdoor areas Brightness range from 1 - 100,000 lux
Ideally combinable with the Theben weather station for individual control of up to 3 facades
Type LUNA 133 KNX Article number 1339200
LUNA 133 KNX Operating voltage KNX Brightness measuring range Bus voltage, (< 5 mA) 1100000 lx Ambient temperature Protection rating 25 C+55 C IP 54

32 50,5 81,5

TR 648 S DCF KNX TR 644 S DCF KNX

Q Q Q Q Q Q Q Q Q Q Q

365-day time switch With daily, weekly, yearly, random, pulse and priority programs Free weekdays and channel blocks 1.5 years power reserve via replaceable environmentally-friendly lithium battery Movable public holidays can be automatically adjusted annually Automatic summer/winter time change Switching times are permanently stored in EEPROM Programming via key entry on device or OBLISK 2.1 programming set Interface for OBELISK memory card (PC programming)
Time and date synchronisation from other bus participants Time-dependent specication of different temperature levels for individual room control Time-dependent compulsory control (mainly ON or OFF) by consumers via priority telegrams Random switching for presence simulation 16 channel time switch with annual program Optional DCF77 radio
Channels 1 to 4 can be programmed as astronomical switching channels (astronomical programs can only be programmed using OBELISH software) 4 channel time switch with yearly program Optional DCF77 radio 4 channel time switch with yearly program Without DCF77 radio

TR 644 S DCF KNX

TR 644 S KNX

TR 648 S DCF KNX

Type TR 648 S DCF KNX Article number 6449203
TR 644 S DCF KNX TR 644 S KNX
TR 648 S DCF KNX Operating voltage KNX Operating voltage Width Number of channels Number of astronomical channels Number of memory cells Time accuracy Shortest switching time Display Ambient temperature Protection rating Protection class 500 1 s/day(Quartz) or DCF77 1s LCD 5 C+45 C IP 20 II in accordance with EN 60,335 TR 644 S DCF KNX Bus voltage, (< 10 mA) 230 V AC (only with DFC77 antenna connection) 6 modules 1 s/day(Quartz) TR 644 S KNX

Antenna DCF77 KNX

OBELISK KNX PC set
Memory card OBELISK KNX 64 K
Memory card OBELISK KNX 16 K
Art.No.: 9070271 Page 228 Details
Art.No.: 9070305 Page 229 Details
For TR 648 S DCF KNX Art.No.: 9070320 Page 230 Details
For TR 644 S DCF KNX Art.No.: 9070223 Page 229 Details

DCF RC DCF N L N

DCF RC DCF N L

TR 612 S KNX

2 channel weekly timer With screen to display: Day of the week, time, switching status etc. With daily and weekly programs 36 switching times 99 day holiday program; programmed in advance 6 year power reserve
Automatic summer/winter time change Automatic program review Switching times are permanently stored in EEPROM Permanent ON/OFF switching
Type TR 612 S KNX Article number 6129201
TR 612 S KNX Operating voltage KNX Width Number of channels Number of memory cells Time accuracy Bus voltage, (< 3.5 mA) 2 modules 1 s/day(Quartz) Shortest switching time Display Ambient temperature Protection rating Protection class 1 min LCD 5 C+45 C IP 20 II in accordance with EN 60 335

ZS 600 DCF KNX

Time transmitter for hour and date Can also be used with DCF77 antenna LED for status display DCF reception Integrated voltage supply for DCF77 antenna
Preset time and date (CET or CEST) Automatic summer/winter time change
Type ZS 600 DCF KNX Article number 6009200
ZS 600 DCF KNX Operating voltage KNX Width Power reserve Time accuracy Bus voltage, (< 10 mA) 2 modules 10 years 1 s/day(Quartz) or DCF77 Ambient temperature Protection class Protection rating 10 C+50 C III in accordance with EN 60 730-1 IP 20
Power supply 640 mA/320 mA/160 mA
Power supply 640 mA Power supply 320 mA Power supply 160 mA
KNX-Supply voltage Produces and monitors the KNX system voltage and 30 V DC auxiliary supply
Reset key for 20 sec. bus reset Continuous short-circuit protection 640 mA supply voltage

Power supply 320 mA

320 mA supply voltage 160 mA supply voltage

Power supply 640 mA

Power supply 160 mA
Type Power supply 640 mA Power supply 320 mA Power supply 160 mA *Available May 2010 Article number 9070364 9070699* 9070701*
Power supply 640 mA Operating voltage
Power supply 320 mA 230 V AC, 5060 Hz

Shutter control

LUXOR shutter control

LUXOR 408 LUXOR 409

For controlling shutters, awnings or blinds Separate control of 4 shutters with UP/DOWN/STOP Manual switch on device LEDs to display Controllable via standard shutter sensor Upgradeable for up to 16 LUXOR modules
LUXOR modules are connected via 2-wire bus cable (COM bus) Setting option for panic function (via LUXOR 400) Storable intermediate position and turn for shading and ventilation

LUXOR 408

4-channel roller shutter basic module Central UP/DOWN, panic 1 group With three group functions (individual, group and central control) Expandable via channel extension modules, time and sensor module and weather station 4 channel shutter extension module

LUXOR 409

Type LUXOR 408 LUXOR 409 Article number 4080000 4090000
LUXOR 408 Operating voltage Frequency Width Power consumption Installation type Number of channels Type of contact Connecting cable Connection for COM Switching capacity Function channels Ambient temperature Protection rating Protection class 230 V AC 50 Hz 4 modules 4 VA DIN-rail 4 NO contact 230 V phase-independent supply cable, cable length max. 100 m Any cross-section/max. length 100 m 6 A (at 250 V AC, cos = 1) LUXOR 409
for shutter, blind and awning control 10 Cbb+50 C IP 20 II in accordance with EN 60 730-1

LUXOR sensor technology

LUXOR 411 LUXOR 412 LUXOR 413

LUXOR 411

LUXOR 412

LUXOR 413

Sensor module For controlling awnings, shutters and blinds in combination with LUXOR 412 and/or 413 and integrated light sensors Setting threshold values on device LEDs to display Max. input cable length of sensor line is 100 m LUXOR modules are connected via 2-wire bus cable (COM bus)
Weather sensor For controlling awnings, shutters and blinds depending on rain, wind velocity, temperature and brightness in combination with sensor module LUXOR 411 Optional connection of up to two additional light sensors for additional facades Supply voltage via COM-Bus
Wind sensor For controlling awnings, shutters and blinds depending on wind velocity in combination with sensor module LUXOR 411 Extra power unit required Optional connection of up to three additional facades with automatic sun protection function
Type LUXOR 411 LUXOR 412 LUXOR 413 Article number 4130000

Required for special functions (group/central function) 2 items included in delivery
LUXOR 400 LUXOR 402 LUXOR 404 LUXOR 408 LUXOR 409

9070367

GSM cable PHARAO-II
Enables connection to be established and SMS data to be transmitted to mobile telephone, email address or fax machine.

All PHARAO controls

9070329

Power unit 24bVbDC

Power pack for supply voltage from PHARAO controllers and sensors. Power unit sufcient for 5 x PhARAO-II 14/15 or 4 x PHARAO-II 24/25 controls Width 3 modules (52.5 mm)
LUNA 131 DDC LUXOR 413 All PHARAO controls

9079330

Software for PHARAO and PHARAO-II Generation CD for Windows 95/98/NT/2000/ME/XP
Programming software 9070251 PHARAO

Programming cable PHARAO

For series connection (RS 232) to enable control programs to be congured and parameterised. This cable is used to connect an analogue model for remote maintenance and remote control.

9070252

Plug-in external EEPROM memory module 5kB for transferring and/or downloading the program from or to the internal EEPROM system memory. Internal program is deactivated for as long as the external memory module is plugged in (dual programming).

9070328

Index 2010/2011
Type A Actuator ALPHA V Actuator ALPHA V Adapter plate RAMSES 70x Adapter plate RAMSES 714 Adapter RAMSES 72x/78x AMUN 716 KNX AMUN 716 R AMUN 716 USB Analogue ush-mounted light sensor Analogue surface-mounted light sensor Antenna DCF77 Antenna DCF77 KNX Antenna RAMES 813/833 Antenna top2 RC-DCF Antenna top2 RC-GPS B BME 6 KNX BMG 6 KNX Bus coupling unit KNX BZ 142-1 BZ 142-1 110V BZ 142-1 240V BZ 142-1 24V BZ 142-3 BZ 143-1 BZ 145 BZ 145 24V BZ 146 BZ 147 BZ 147 24V BZ 148 C Central part RAMSES 741/748 Central part RAMSES 746 CHEOPS control KNX CHEOPS drive KNX Clamp BZ clic compact ofce compact ofce 24V compact ofce 24V BK compact ofce 24V Lux compact ofce 24V Lux BK compact ofce 24V Lux SR compact ofce 24V SR compact ofce BK compact ofce DIM compact ofce DIM BK compact ofce DIM SR compact ofce EIB compact ofce EIB BK compact ofce EIB SR compact ofce SR compact passage compact passage 24V compact passage 24V BK compact passage 24V SR
Article number EAN/GTIN number

Type compact passage BK

Article number EAN/GTIN number 4003468649008 4003468649015