PARTS LIST LISTE PIECES DETACHEES ERSATZTEILLISTE LISTA PARTI DI RICAMBIO LISTA DE PIEZAS DE REPUESTO
THOMSON 32LB138B5 Chassis IFC130
QDI QD32HL03 CMO V320B1-L04 CMO V320B1-L01 Version 0 : 32LB138B5 Version 1 : 32LB138B51 Version 2 : 32LB138B52
IV201 IV301 IV302 IV700 IX800 IX802 IX803,805 IX804,806,809, 900,910 IX807 IX808 MT48LC4M16A2TG-7EG FLAT R=Y ESD PACVGA105QR R=Y RS232 FLAT R=Y SAA7117A FLAT R=Y MM1227XFBE FLAT R=Y STV6415DD FLAT R=Y MM1511XNRE FLAT R=Y MM1507XNRE FLAT R=Y MM1224XFBE FLAT R=Y MM11228XF FLAT R=Y 2127609A 55175740

32LB138B5 Version 0

MODULES
AV DVBT FAV IF KB POWE PWSB SCAL AV IFC130E 01 R=Y DVBT310 CABOT R=Y FAV IFC130E 01 R=Y RF IFC130E 01 R=Y KB/IR/LED IFC130E R=Y SMPS (POWER MAIN) R=Y SMPS (STANDBY) R=Y SCALER (QDI 32-12V) R=Y 2144864F 21669520 2145075A 2146366A 2143065A 21676480
IM075 IM083 IM100 IM130,190 IM220 IM500 IM550 IM551 IM580 IM680 IM681 IP100,103,107, 110,121 IP101 IP101,105,106 IP102,105 IP103 IP104 IP104,107 IP106 IP106 IP108,130 IP610 IP620 IP630 IR100 IR103 IR105 IR106 IR200 IR900 IS200 IT100 IT101 IT105,106,107 IT150,IV300 IV200
74VHCU04M FLAT R=Y NCP303LSN30T1 R=Y M29W160ET70N6 SOFT DVBT310 CABOT R=Y MT48LC4M16A2TG-75 (1M*16*4) FLAT R=Y ATTINY2313 FLAT R=Y 74HC157 FLAT R=Y CS4334-KS D/A R=Y MC33078 FLAT R=Y HEF4053BT FLAT R=Y LA79503V-TLM-E FLAT R=Y MM1508XNRE FLAT R=Y LD1117S33TR FLAT R=Y LD1117DT33 R=Y LD1117S25TR FLAT R=Y LD1086D2T18 FLAT R=Y LD1117DT FLAT KF80BDT R=Y LD1117S18TR FLAT R=Y LF50CDT FLAT R=Y LD1086D2T25 FLAT R=Y L4973D5.1 FLAT R=Y STR-A6159 R=Y TL431 R=Y TCET1103G R=Y W PW118B-10L FLAT R=Y PST421A290N FLAT R=Y M24C64-WMN6 FLAT R=Y M29W320EB70N6 SOFT SCALER CABOT R=Y 74LVX574 FLAT R=Y DS90C387AVJD FLAT R=Y STA515W FLAT R=Y SII9011CTU FLAT R=Y UPA672T-T1-A FLAT R=Y ESD CM1213-04SO R=Y W M24C02-WMN6TP FLAT R=Y PW2300-30L FLAT R=Y
DM500,IA301 DT100 FP101 FZP001 FZP110 IA001 IA300 IA500 ID100,101 IH100,IP101 IH100,IP102, 103 IH200 II001 II050 II061 II065,081 II084 IK001
Lead Free Sans Plomb ohne blei senza cavo sin plomo
IR102 TA001,002, TH001,100, TK001,TM240, 241,242,243, 602,622,642, 662 TA003 TK002,TM580, TP100,101,102, 103,TR100,101, TS203,205, TT120,121 TM600,601,620, 621,640,641,661 TM660,TS202 TP601 STT4PF20V SMD R=Y BC846B SMD R=Y RN2402 SMD R=Y RN1402 SMD R=Y
ESDA14V2L R=Y ESD CM1213-02SR R=Y TE5-T NO 19396 315MA W 125V R=Y TE5-T NO396 1600MA 125V R=Y TE5-T NO19396 2.5A 125V R=Y MSP4610K-QA-D6-002 FLAT R=Y TS482D FLAT R=Y TEA6422D FLAT R=Y MT46V16M16P-6T FLAT R=Y LD1117S50C FLAT R=Y LD1117S50 5V0 R=Y TPS2045D FLAT R=Y CIMAX-TM2.0 (T90FJR) FLAT R=Y SN74LVC14APW FLAT R=Y SN74LVC245APW FLAT R=Y SN74LVC373APW FLAT R=Y TPS2041A FLAT R=Y TFMS5330B R=Y

10938620 20627780

W 21393360 16006260

16007110 36042230

BC847PN R=Y BC857B SMD R=Y BC848B SMD R=Y

36030440

DE101 DH100 DH101,200 DH101 DM113,DP601, DS203,207,216, 218,DX100 NSAD500H R=Y BA592 SMD R=Y BZX284 33V 400MI0W R=Y BZX55C33 R=Y LL4148 SMD R=Y 36103600
For any requests, please contact THOMSON after sales europe area Pour toutes prcisions, contactez votre service apres vente local THOMSON service europe Fr weitere Ausknfte, wenden Sie sich bitte an die THOMSON sales europe Kundendienste Per precisazioni, contattare lassistenza tecnica THOMSON sales europe Para cualquier pregunta, por favor contactar con el responsable de zona del servicio postventa de THOMSON sales europe

I - SERVICE-MODE

1 - ACCESING SERVICE MODE
EFC031E 1.1 TV set ON. 1.2 While keeping pressed the VOL- key on the TV keyboard press EXIT on the RC until TV set switch on and enter service mode. (Main menu). IFC130 - EFC031E (according software version) 1.1 Switch the TV set into the Standby Mode. 1.2 While keeping pressed the VOL- key on the TV keyboard press VOL- on the RC until TV set switch on and enter service mode (Main menu).

EFC031E MAIN MENU

Factory setting EFC031_X181-0 Return (Video Sound Miscellaneous Field Service.

IFC130 MAIN MENU

Service Menu Return (Video Sound Misc PW218 1st page PW218 2nd page SAA7117AE PW2300 BL1.41..
2 - TEMPORARY EXIT FROM SERVICE MODE
2.1- 2.1- To temporary leave the Service Mode from the Main menu, goto the point Return. To access the everyday menus, press the Menu button on the RCU. Note : - According to the type RCU it is possible to temporary leave the Service Mode by pressing Exit or Return key.
RETURN TO THE MAIN MENU EFC031E
2.2 - To return to the Main menu, While keeping pressed the VOL- key on the TV keyboard press Exit on the RC until TV set switch on and enter service mode.

IFC130

2.2 - To return to the Main menu, press on the magenta key (text) on the RCU. Note : - A IFC130 menu not used during 3 minutes disappears. Press on the magenta key (text) on the RCU to return to the Main menu.
3 - EXITING FROM SERVICE MODE
3.1- To exit the Service Mode switch off the mains supply to the TV. All change in service mode will be saved in EEPROM automatically.
4 - EXITING FROM A SUB-MENU
4.1- To exit from a Sub-Menu (see 8) and return to the Main menu press the Exit key or the Return key on the RCU.
5 - NAVIGATION INSIDE THE SERVICE MODE

TV CONTROL PANEL

Factory setting EFC031_X181-0 Return (Video Sound Miscellaneous Field Service Factory setting EFC031_X181-0 Return (Video Sound Miscellaneous Field Service.
navigation up - Selec option* Vol. - Change value Vol.

Navigation down

VALUE VALUE * Select option is possible with OK
EFC031E - IFC130 First issue 02 / 06

REMOTE CONTROL

Navigation up - Select option*

- Change value

VALUE VALUE
* Select option is possible with OK
6 - DISPLAYING THE VALUE OF THE SETTING

(Brightness

Valeur dcimale
Valeur de rglage : NVM valeur

Affichage NVM valeur

- <

7 - TOGGLE FUNCTION

To enable a function check (tick) : Implemented function the box. : No implemented function
8 - LITE MENU FOR FIELD SERVICE

MAIN MENU

Software version Version Software Software Version Versione softaware Versin software

Factory setting

EFC031_X181-0
Alignment Alignement Ableigh Regolazione Alineacion
Return ( Video Miscellaneous Sound Field Service

SUBMENU

Factory setting EFC031_X181-0
II - EFC031E CHASSIS - ALIGNMENT

1 VIDEO

1.1 Conditions - The TV set should be warmed up for 60 minutes. - The following conditions are automatically set when entering the Video submenu. Function Brightness Colour Contrast Black Extand Tone Sharpness Noise reduction Couleur NTSC Mode zoom Alignment Value Standard Standard Standard (70%) Off.* Neutral. Not applicable* Off.* 50% Standard
* Set these conditions in the User menu 1.2 Y, Pb, Pr Component Input Video test pattern

Test Pattern

Philips test pattern

12 steps greyscale

Format 1H 2H

4:3 576i25Hz 576p50Hz

16:9 1080i25H z 720p60Hz

16:9 1080i25Hz 720p60Hz

1.3 VGA Input Standard Monitor Format (VESA)
Standard TV Display Format
Test Philips test pattern Pattern

Test Pattern Picture

Format 640x480@60Hz,
800x600@85Hz, 1280x1024@75Hz
640x480@60Hz, 800x600@85Hz, 1280x1024@75Hz

1.4 Video Calibration

EFC031E Factory setting Return Video Sound (Miscellaneous Field Service EFC031_X181-0. Factory Misc (Reset the values to ROM default LUMA_TEMPORAL-NR CHROMA_TEMPORAL-NR Calibration Debug Reset the Alignment values TT 27Y24 Packet Enable* Yes?

.. Yes?

* According software version 1.4.1 MST9883 ADC Calibration YPbPr Calibration for TV display format
- Connect Y, Pb, Pr signal to BV280 connector (Video Components Enter) with the following standard. Input signal parameters: Signal Y: Sync to Peak white Pr:Sync to Peak white Pb:Sync to Peak white Value (Vp-p) 0.7 0.7 0.7

- Exit temporary from Service Mode and select the Video Components Enter (press the magenta key on the RCU Text to come back at the service mode ) - Video pattern to calibrate
Calibration Pattern Color bar with no Gamma correction Picture

Format

480p60Hz, 1H, 4:3
- Select YPbPr and Calibration in the Miscelaneous Menu of Sevice Mode and press on the RCU OK key. The screen is flashing few minutes and stable after few seconds.
1.4.2 RGB RGB Calibration for Standard monitor format (VESA)
- Connect R, G, B Hsync and Vsync with following standard into VGA BV300 connector: Signal R (Red) G (Green) B (Blue) Hsync. Vsync. Value (Vp-p) 0.7 0.7 0.7 2.4V 2.4V
- Exit temporary from Service Mode and select the VGA enter (press the magenta key on the RCU Text to come back at the service mode) - Video pattern to calibrate
Calibration Pattern 16 step Gray scale with no gamma correction Picture

800x600@85Hz

- Select Calibration in Miscelaneous Menu of the Service Mode and press on the RCU OK key. The screen is flashing few minutes and stable after few seconds. Note: The others items of the Miscellaneous menu are described at 4.

2 - VIDEO ALIGNMENT

2.1 Cut Off EFC031E
Factory setting Return (Video Sound Miscellaneous Field Service EFC031_X181-0. Factory video (Cut Off Alignment. Whitepoint alignment. Scalling Brightness Alignment. Scalling Color Alignment. Scale Tint Alignment. Peak White Alignment. Text Contrast alignment. Preset for Video Alignment.
Cutt Off alignment has to be done for the following standards : Note: After Cut Off alignment control white point alignment. Repeat the adjustments if necessary.
R offset G Offset B Offset

Input SCART YPbPr

+0007 +0024 +0016

HDMI FAV (CVBS)

Video Standard PAL / SECAM/ RGB SDTV (576i) HDTV (108i 25) HDTV (720p 60) VESA (DMT 1060) SD Video (576i) HD Video (1080i 25) HDTV (720p 60) SD Video (576i)
- Insert a grey test pattern giving 15 Nits luminance level - Measure the color co-ordinates near the screen center. - Fix B Offset to the centre of the alignment range. - Adjust R Offset - G Offset: Colour Co-ordinates x y Value 0.282 0.293
2.2 Whitepoint - Whitepoint alignment has to be done for the same standards of the Cuttoff alignment :

R Gain G Gain B Gain

+0496 +0531 +0513
- Insert a grey test pattern with 50 IRE in one of the above mentioned standards. - Measure the color co-ordinates near the screen center. - Fix B Gain to the centre of the alignment range. - Adjust R Gain - G gain to the following color co-ordinates: Colour Co-ordinates x y Value 0.282 0.298
2.3 Scaling Brightness Alignment Brightness -0003
- The Scalling Brightness is a factory alignment.
EFC031E: Brightness = +0003
2.4 Scaling Colour Colour +0512
- Scaling Color Alignment has to be done for the following standards :
- 75% Color bar test pattern. - Measure the Blue output and adjust Colour to equal levels as shown bellow: Input SCART YPbPr Video Standard PAL / SECAM/ RGB SDTV (576i) HDTV (108i 25) HDTV (720p 60) VESA (DMT 1060) SD Video (576i) HD Video (1080i 25) HDTV (720p 60) SD Video (576i)
2.5 Scale Tint NTSC Tint +0000
- No alignment for EU models.
2.6 Peak White Alignment Contrast +0534
- Peak White test pattern (100%).Colourimeter. - Peak White alignment has to be done for the following standards : Input SCART YPbPr Video Standard PAL / SECAM/ RGB SDTV (576i) HDTV (108i 25) HDTV (720p 60) VESA (DMT 1060) SD Video (576i) HD Video (1080i 25) HDTV (720p 60) SD Video (576i)
- Adjust Contrast to the level : 450 Nits +20% -15%.
2.7 Text Contrast. - Selecting this item inserts a white centered pad.

Text Contrast 14

- Measure the optical luminance output level (Y Nits) of the white pad.
- Adjust Text Contrast to the 60% of the PW level. Contrast +0534
3 - SOUND - The items of the SOUND menu are not used 4 - MISCELLANEOUS - EFC031E
Factory setting Return Video Sound (Miscellaneous Field Service EFC031_X181-0. Factory Misc (Reset the values to ROM default LUMA_TEMPORAL-NR CHROMA_TEMPORAL-NR Calibration Debug Reset the Alignment values TT 27Y24 Packet Enable* Yes?
* According software version
4.1 Reset the values to ROM default - Reset all the EEPROM data to FF. Only required if the EEPROM data are corrupted. After reset the values to ROM default the alignment, calibration and channel installation is necessary. 4.2 LUMA_TEMPORAL_NR - Temporal noise reduction setting for luminance. Factory adjusted. It is not necessary to do adjustment on this item. 4.3 CHROMA_TEMPORAL_NR - Temporal noise reduction setting for chrominance. Factory adjusted. It is not necessary to do adjustment on this item. 4.4 Calibration See 1.4 4.5 Debug - Bus quiet mode for main I2C Bus. Used only in development purpose. 4.6 Reset the Alignment values - Reset all alignment values to default value. Used only if the TV need new alignment. In that case it is necessary to start alignments by Video Calibration (ADC YPbPr). Note: After loading of a new software select Reset the alignment values and check the TV alignment. 4.7 TT 27Y24 Packet Enable According to software version. Factory adjust. Improve teletext performance for some special French channels

5 - FIELD SERVICE (Spcifique EFC031E)
Factory setting Return Video Sound Miscellaneous (Field Service EFC031_X181-0. Field Service (Test patterns Off
Power Usage: 000030:29 LCD Usage: 000030:05
Clear Event History. Code Count Timestamp 000000:00 000000:00 000000:00 000000:00 000000:00
5.1 Test Patterns To check the Scaler Board: - Press Left or Right key on RCU activate the purity test patterns in the following order: Continous, white, black, red, green, blue, off. 5.2 Power Usage - LCD Usage Power Usage and LCD Usage are time counters. - Power Usage indicates the Power supply number of service hours and minutes. - LCD Usage indicates the TV number of service hours and minutes. The display is decimal. 5.3 Clear Event History To clear all error codes stored in the NVM. Action : Select the line and Press the right key on RCU to confirm. 5.4 Error Codes 1 - The last five Error codes are stored and displayed with a time stamp from the runtime counter. Each each error code in this list has an error counter that counts further occurences of a particular error. 2 - If an error occurs that is already in the list the time stamp is updated and the error counter is incremented anymore. 3 - The errors are displayed with the most recent error on top on the list. The others follow with descending time stamps. Displaying Error Codes with LED 1 - In addition to storing an error code it must also be displayed with TVs standby LED. Only the last error that occured is displayed. 2 - Decimal error codes from 11 to 18 are signaled. 3 - The error code is displayed as two separate digits separate by a suitable pause, this is repeated according to a specific sequence. For example Error-code 13 will be displayed thus : 1 flash and a short pause 3 flashes and a long pause. List of Error Codes (Specific EFC031E): ERR_EEPROM ERR_SAA7117A ERR_MST9883C ERR_MASTER TUNER ERR_TEA6415C ERR_MSP4411K ERR_MAD4868 ERR_TEA6422D
III - IFC130 CHASSIS - ALIGNMENT
1.1 Conditions - The TV set should be warmed up for 60 minutes. - The following conditions are automatically set when entering the Video submenu. Fonction Lumire Couleur Contraste Noir renforc Tonalit Contour Rducteur de bruit Couleur NTSC Mode zoom Valeur Standard Standard Standard (70%) Inactif* Neutre 50% Inactif* 50% Standard
1.3 VGA I Format Moniteur standard (VESA)
Format affichage TV standard

1.4 VIDEO CALIBRATION

1.4.1 YPbPr Calibration for TV display format IFC130 Return Panel Selection Analog RGB Calibration YCbCr Calibration Factory Reset BW Expand CUEC / ICP FRMEC Flestone Correction Film Mode 3:2 Film Sensitivity 2:2 Film sensitivity Pixel Boost DCS DCTI Peaking Spatial noise Filter LumaTemp.Noise Filter LAI

Service Menu Return (Video Sound Misc PW218 1st page PW218 2nd page SAA7117AE PW2300

BL1.41..

064 000
- Connect Y, Pb, Pr signal to BV600 (Video Components Enter) with the following standard. Signal Y: Sync to teak white Pr:Sync to teak white Pb:Sync to teak white Valeur (Vp-p) 0.7 0.7 0.7

720p60Hz, 2H, 16:9

- Select YPbPr Calibration in the PW218 1st page Menu of the Service Mode and press the OK key on the RCU. The screen is flashing few minutes and stable after few seconds.
1.RGB Analog RGB Calibration Return Panel Selection Analog RGB Calibration YCbCr Calibration Factory Reset BW Expand CUEC / ICP FRMEC Flestone Correction Film Mode 3:2 Film Sensitivity 2:2 Film sensitivity Pixel Boost DCS DCTI Peaking Spatial noise Filter LumaTemp.Noise Filter LAI

1024x768@60Hz

- Select Analog RGB Calibration in the PW218 1st page menu of the Service Mode and press the OK key on the RCU. The screen is flashing few minutes and stable after few seconds. Note: The others items of the PW218 1st page are described at 5.
2 - VIDEO ALIGNMENT 2.1 Cut Off IFC130
Service Video (Cut Off Alignment. Whitepoint alignment. Scalling Brightness Alignment. Scalling Color Alignment. Scale Tint Alignment. Peak White Alignment. Text Contrast alignment. Preset for Video Alignment.
R Cutoff G Cutoff B Cutoff

-0028 -0004 -0016

- Insert a grey test pattern giving 15 Nits luminance level - Measure the color co-ordinates near the screen center. - Fix B Cutoff to the centre of the alignment range. - Ajuster R Cutoff - G Cutoff: Colour Co-ordinates x y Value 0.282 0.293
2.2 Whitepoint -Whitepoint alignment has to be done for the same standards of the Cuttoff alignment :

+0528 +0520 +0544

- Insert a grey test pattern with 50 IRE in one of the above mentioned standards. - Measure the color co-ordinates near the screen center. - Fix B Gain to the centre of the alignment range. - Adjust R Gain - G gain to the following color co-ordinates: Coordonnes couleur Valeur x y 0.282 0.298
- Scaling Brightness Alignment est un rglage usine.
IFC130 : Brightness = +0024
EFC031E- IFC130 First issue 02 / 06
HDMI FAV (CVBS) 2.5 Scale Tint NTSC Tint

3 - SOUND

- The items of the SOUND menu are not used.
4 - MISCELLANEOUS - IFC130

Return

ADC Calibration Test pattern..
4.1 ADC Calibration - Not used in this Menu. The ADC Calibration adjustment is done in the PW218 1st page (see 1.4). 4.2 Test pattern To check the Scaler Board: - Press Left or Right key on RCU activate the purity test patterns in the following order: Continous, white, black, red, green, blue, off.

5 -PW218 1st page - PW218 2nd page - PW2300 (spcific IFC130) NOTE :
The Analog RGB Calibration and YCbCr Calibration items are described at 1.4.
Except other indication the following items , only deal with factory adjustments. Their meaning is given for information only.
5.1 - PW218 1st page Return Panel Selection Analog RGB Calibration YCbCr Calibration Factory Reset BW Expand CUEC / ICP FRMEC Flestone Correction Film Mode 3:2 Film Sensitivity 2:2 Film sensitivity Pixel Boost DCS DCTI Peaking Spatial noise Filter LumaTemp.Noise Filter LAI
Panel Selection - Different panel timing selection. Factory adjust. If this item is modified, set it to the previous value (009) then exit from the Service Mode and enter again.
Factory Reset - Factory reset of EEPROM data to default value. Used only if the alignment have somthing wrong and need to align the TV again. Installed channel will lost. ADC calibration no change. Note: After loading of a new software select Factory reset and check the TV alignment. BW Expand: Black expand. CUEC/ICP: Color Upsampling Error Correction / Inter-Chroma Processing. FRMEC: Frame Rate Motion Error Correction. Fleshtone Correction: Color correction. Film Mode: Film Mode On / Off. 3:2 Film Sensitivity - 2:2 Film Sensitivity: Film Mode 3:2 (or 2:2) sensitivity setting. Pixel/Boost : Pixel boost On / Off. DCS: Dynamic Color Saturation. DCTI: Digital Color Transient Improvement Peaking: Peaking Gain setting. Spatial Noise Filter: Spatial Noise Filtering setting. LumaTemp Noise Filter: Luma temporal Noise filtering setting. LAI : Low Angle Interpolation

5.2 - PW218 2nd page

Quit Blue Cal BWE Enable BWE Mode DYNKDEINT Enable

000 001

Blue Cal: Blue Calibration. BWE Enable: Black White Expansion On / Off. BWE Mode : Black White Expansion Mode. DYNKDEINT Enable: Dynamic Motion weighting factor for DEINTerlacer

5.3 SAA7117AE Not used.

5.4 PW2300
Selected Feta 3D Comb Filter FTC Level FTC Angle DCTI Gain DCTI Frequency DLTI Gain DLTI Frequency Luma Peaking Gain Luma Peaking L Threash Luma Peaking U Threash Luma Peaking L Trans Luma Peaking U Trans Luma Sharpness Gain Luma Sharpness Freq Black Stretch White Stretch
Selected Feta: Select the PW2300 IC if there are>1. 3D Comb Filter: Validation On / Off de 3D Comb Filter. FTC Level: Fleshtone correction Level. FTC Angle: Fleshtone correction Angle. DCTI Gain: Digital Color Transient Improvement Gain. DCTI frequency: Digital Color Transient Improvement Frequency. Luma Peaking Gain: Luma Peaking gain. Luma Peaking L Threash: Luma Peaking Lower Threshold. Luma Peaking U Threash: Luma Peaking Upper Threshold. Luma Peaking L Trans: Luma Peaking Lower Transient. Luma Peaking U Trans: Luma Peaking Upper Transient. Luma Sharpness gain: Luma Sharpness Gain. Luma Sharpness freq: Luma Sharpness Filter Cutoff frequency. Black Stretch: Black Strech On / Off. White Stretch: White Strech On / Off.