Type BF applied part.

The Ultra compact forehead thermometer is a high quality product incorporating the latest technology and tested in accordance with international standards. With its unique and clinically tested technology, the ultra compact forehead thermometer can provide a stable reading comparable with an oral temperature. The instrument performs a selftest every time it is switched on to always guarantee the pecified accuracy of measurements. The ultra compact forehead thermometer allows a simple and quick measurement of the body temperature. Please keep in mind that, like any skin temperature , the temperature at the forehead area might be lower then the core body temperature. Body temperature varies depending on the part of the body where it is measured. The variation can be between 0.2 - 1 C. Temperatures measured with different thermometers cannot be compared with one another. Tell your doctor or take into account when diagnosing yourself what thermometer you used in what part of the body to
measure the temperature. A basic physiologic effect called vasoconstriction can occur in the early stages of fever, resulting in a cool skin effect, the recorded temperature using a forehead thermometer may be suspiciously low. If the measurement result is not consistent with the patient's finding or suspiciously low, repeat the measurement every 15 minutes or double check the result by another core body temperature measurement, e.g. use an IR-eardrum thermometer or a rectal pen-type thermometer.
Table of Contents: 1. The Advantages of this Thermometer 2. Important Safety Instructions 3. How this Thermometer measures Temperature 4. Control Displays and Symbols 5. Directions for Use 6. Celsius to Fahrenheit switchable 7. How to recall 12 readings in Memory Mode 8. Error Messages 9. Cleaning and Disinfecting 10. Battery Replacement 11. Guarantee 12. Technical Specifications
1. The Advantages of this Thermometer Measurement in a matter of seconds The innovative infrared technology allows measurement simply by scanning the eyebrow area. After a scanning time of 3 seconds the measurement will be displayed on the LCD. Accurate and reliable Due to the unique probe assembly construction, incorporating an advanced infrared sensor this device can offer accurate and reliable temperature measurements. Gentle and Easy to Use The ergonomic design enables simple and easy use of the thermometer. This thermometer can be used even on a sleeping child, thereby causing no interruption. This thermometer is quick, therefore pleasant to use for children. Auto-Display Memory The last reading is automatically displayed for 2 seconds when the unit is switched ON. 13

Multiple Reading Recalls Users will be able to recall the last 12 readings when entering the recall mode, enabling efficient tracking of temperature variations. Safe and Hygienic No risk of broken glass or mercury ingestion. Completely safe for use on children. Cleaning of the probe can be done with an alcoholmoistened cotton tissue, making this thermometer completely hygienic for use by the whole family. High Temperature Indication 10 short beeps and a red LCD backlight alert the patient that he/she may have a temperature above 37.5 C. 2. Important Safety Instructions This instrument may be used only for the purpose described in this booklet. The manufacturer cannot be held liable for damage caused by incorrect application. Never immerse this instrument into water or other liquids (not waterproof). For cleaning please follow the instructions in the Cleaning and Disinfecting section. 14
Do not use the instrument if you think it is damaged or notice anything unusual. Never open the instrument. This instrument comprises sensitive components and must be treated with caution. Observe the storage and operating conditions described in the Technical Specifications section! Protect it from: extreme temperatures impact and dropping contamination and dust direct sunlight heat and cold If the instrument is not going to be used for a prolonged period the batteries should be removed. Ensure that children do not use the instrument unsupervised; some parts are small enough to be swallowed. WARNING: Use of this instrument is not intended as a substitute for consultation with your physician. This instrument is NOT waterproof! Please NEVER immerse into liquids.
3. How this Thermometer measures Temperature The thermometer measures infrared energy radiated from the skin above of the eyebrow area and the surrounding tissue. This energy is collected through the lens and converted to a temperature value. Temperature readings obtained by scanning above the eyebrow area will provide the greatest accuracy. 4. Control Displays and Symbols All segments displayed 6 : Press the ON/OFF button 4 to turn on the unit, all segments will be shown for 2 seconds. Memory 7 : The last reading will be shown on the display automatically for 2 seconds. Ready for measurement 8 : The unit is ready for measurement, the C or F icon will keep flashing. Measurement complete 9 : The reading will be shown on the display 3 with the C or F icon flashing, the unit is ready again for the next measurement. Low battery indication 10 : When the unit is turned on, the battery icon will keep flashing to remind the user to replace the battery.

5. Directions for Use 1. Press the ON/OFF button 4. The display 3 is activated to show all segments for 2 seconds. 2. The last measurement reading will be shown on the display automatically for 2 seconds with the M icon 7. 3. When the C or F icon is flashing, a beep sound is heard and the thermometer is ready for measurement 8. 4. Place the probe gently onto the area approximately 1cm above the center of the eyebrow. If the eyebrow area is covered with hair, sweat or dirt, please remove the obstacle beforehand to improve the reading accuracy. 5. Press the START button once and release it. Start to move the instrument steadily from 1 cm above the center of the eyebrow to the temple area. A long beepsound will emit after 3 seconds to acknowledge the completion of measurement. If the probe movement is too slow to reach the temple area before the long beeb sound heard, repeat the measurement as above from point 4, but simply move the probe a little quicker this time. 15
6. Read the recorded temperature from the LCD display. NOTE: Patients and thermometer should stay in steady-state room condition for at least 30 minutes. Don't take a measurement while or immediately after nursing a baby. Don't use the forehead thermometer in high humidity environments. Patients should not drink, eat, or exercise before/whil taking the measurement. Before placing the thermometer probe onto the measurement area, remove dirt, hair, or sweat. Don't move the measurement device from the measuring area before hearing the termination beep. Use an alcohol swab to carefully clean the probe and wait for 15 minutes before taking a measurement on another patient. 10 short beeps will sound and a red LCD backlight will illuminate when the temperature is higher than 37.5 C (99.5 F) in order to alert the patient that he/she may have a temperature 16
above 37.5 C. Always take the temperature in the same location, since the temperature readings may vary from different locations. In the following situations it is recommended that three temperatures in the same location be taken and the highest one taken as the reading: 1. If the measurement is surprisingly low. 2. Children under three years of age with a compromised immune system and for whom the presence or absence of fever is critical. 3. When the user is learning how to use the thermometer for the first time until he/she has familiarized himself/herself with the instrument and obtainsconsistent readings. 6. Celsius to Fahrenheit switchable This thermometer can display temperature measurements in either Fahrenheit or Celsius. To switch the display between C and F, simply turn OFF the unit, press and hold the START button 2 for 5 seconds; When you stop pressing the START button 2 after 5 seconds, the current measurement scale (C or F icon) will

be flashed on the display 11. Toggle the measurement scale between C and F by pressing the START button 2 again. When the measurement scale has been chosen, wait for 5 seconds and the unit will enter the ready for measuring mode automatically. 7. How to recall 12 readings in Memory Mode This thermometer can recall the last 12 readings. Recall mode 12 : Press the START button 2 to enter Recall mode when power is off. The memory icon M flashes. Memories 13 : Press and release the START button 2 consecutively to recall readings in succession, up to the last 12 readings. Pressing and releasing the START button 2 after the last 12 readings have been recalled will resume the above sequence from reading 1. 8. Error Messages Measured temperature too high 14 : Displays H when measured temperature higher than 42.2 C or 108.0 F.
Measured temperature too low 15 : Displays L when measured temperature lower than 34.0 C or 93.2 F. Ambient temperature too high 16 : Displays H in conjunction with the when ambient temperature is higher than 40.0 C or 104.0 F. Ambient temperature too low 17 : Display L in conjunction with the when ambient temperature is lower than 16.0 C or 60.8 F. Error function display 18 : When system has malfunction. Blank display 19 : Please check if the battery has been loaded correctly. Also check polarity (<+> and <->) of batteries. Dead battery indication 20 : If the steady battery icon is the only symbol shown on the display, the batteries should be replaced immediately. 9. Cleaning and Disinfecting Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring probe. Ensure that no liquid enters the interior of the thermometer. 17
Never use abrasive cleaning agents, thinners or benzene for cleaning and never immerse the instrument in water or other cleaning liquids. Take care not to scratch the surface of the probe lens and the display. 10. Battery Replacement This instrument is supplied with one lithium battery, type CR2032. Replace with a new CR2032 battery when the flashing battery symbol appears on the display 20. Remove the battery cover by sliding it in the direction shown. Remove the battery and replace with a new one 21. 11. Guarantee This instrument is covered by a 2 year guarantee from the date of purchase. The guarantee is valid only on presentation of the guarantee card completed by the dealer (see last page) confirming date of purchase or the till receipt. The guarantee covers the instrument, batteries and packaging are not included. 18
Opening or altering the instrument invalidates the guarantee. The guarantee does not cover damage caused by improper handling, discharged batteries, accidents or non-compliance with the operating instructions. Please contact Allegre Tigex SAS. 12. Technical Specifications Type: Forehead Thermometer FR 100 Measurement range: 34.0 C to 42.2 C (93.2 F to 108.0 F) Resolution: 0.1 C / F Measurement accuracy: Laboratory: 0.2 C, 36.0 ~ 39.0 C (0.4 F, 96.8 ~ 102.2 F) Display: Liquid Crystal Display, 4 digits plus special icons Acoustic: The unit is turned ON and ready for the measurement: 1 short beep Complete the measurement: 1 long beep (1 sec.) if the reading is less than

Grsse: 88,5 mm (L) x 37 mm (B) x 32,5 mm (H) Gewicht: 36 g (mit Batterie) Verweis auf Normen: Erfllt die Anforderungen ASTM E-1965 Klinische Tests: Die Klinischen Tests wurden erfolgreich im Dornbirner Spital (sterreich) 2007 durchgefhrt. Technische nderungen vorbehalten! Gemss dem Gesetz ber die Benutzung von medizinischen Produkten (Medical Product User Act) wird fachlichen Benutzern empfohlen, alle zwei Jahre eine technische Kontrolle vorzunehmen. Bitte beachten Sie die geltenden Verordnungsbestimmungen. Dieses Produkt entspricht der Richtlinie 93/42/EG. Batterien und elektronische Gerte drfen nicht in den Hausmll sondern mssen entsprechend den rtlichen Vorschriften entsorgt werden.
Betriebstemperatur: 16 C bis 40 C (60,8 F bis 104 F) Aufbewahrungstemperatur: -20 C bis +50 C (-4 F bis 122 F) Automatische Ausschaltung: Ca. 1 Minute nach der letzten Messung. Batterie: CR2032 BATTERIE (X1) 3V - mindestens 1000 Messungen 38
Termometro da fronte ultra compatto 11 Sonda Pulsante di inizio misurazione Display a cristalli liquidi Tasto di accensione O/I Porta batteria Tutti i segmenti sono visualizzati Memoria Pronto all'uso Fine della misurazione Batteria scarica Conversione tra gradi Fahrenheit e gradi Celsius e viceversa 12 Modo di richiamo 13 Ricordi le ultime 12 letture Prima di utillizzare lapparecchio leggere attentamente le istruzioni per luso. 20 21
The forehead thermometer ultra compact is a high quality product incorporating the latest technology and tested in accordance with international standards. With its Temperatura corporea eccessiva Temperatura misurata troppo bassa unique and clinically tested technology, the forehead Temperatura ambiente troppo bassa thermometer ultra compact can provide a stable reading comparable with an oral temperature. The instrument Temperatura ambiente eccessiva performs a selftest every time it is switched on to Indicazione di malfunzionamento always guarantee the pecified accuracy of measureNessuna indicazione ments. The forehead thermometer ultra compact allows Indicazione batteria scarica a simple and quick measurement of the body temperaSostituzione della batteria ture. Please keep in mind that, like any skin temperature , the temperature at the forehead area might be lower then the core body temperature. Body temperature varies depending on the part of the body where it is measured. The variation can be between 0.2 - 1 C. Temperatures measured with different thermometers cannot be compared with one another. Tell your doctor or take into account when diagnosing yourself what