www.timex.com

820-095017
THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203. Please read instructions carefully to understand how to operate your Timex watch. Your model may not have all of the features described in this booklet.

GENERAL OPERATION

Press to cycle through time/date, chronograph, countdown timer, alarm. Compass function available in all modes except alarm by pressing.

TIME-DATE

A. From TIME AND DATE mode, press/hold firmly to set. B. SECONDS will flash. Press to return to zero. C. Press to set HOURS, MINUTES, DAY, MONTH, DATE, NORMAL (12hour) or MILITARY (24-hour) TIME, BUTTON BEEP (on or off). Selected item will flash. D. Press to advance selected item. Note AM or PM when setting HOURS (12-hour time only). Hold to advance rapidly. E. Press to exit SET procedure.

ALARM & CHIME

A. Press to begin setting. HOURS will flash. B. Press to advance hours. Note AM or PM designation. C. Press , TENS OF MINUTES will flash. Press to advance. D. Repeat for MINUTES. Press to exit SET mode. NOTE: After every new alarm setting, ALARM will be armed when you exit from SET mode by pressing. The symbol will appear, indicating ALARM is armed. Chime A. Press to alternate between ON and OFF. This indicates ALARM is armed and active. It will sound for 20 seconds, but can be silenced by pressing any button.

CHRONOGRAPH

A. Press to begin timing. NOTE: You can leave CHRONOGRAPH mode while it is running. In TIME OF DAY mode, stopwatch icon on left side of middle display indicates chronograph is running. B. Press to stop. C. Press to resume timing OR Press and hold to reset. Split Timing A. Begin timing--press as above. Press to temporarily freeze display and measure a split. Lap # will show in upper display (), watch will continue counting. B. Press to resume showing running lap. C. When event ends, press. Watch will end timing. Display will show final split time (total event time). D. Press/hold to reset chronograph to zero. NOTE: To pause during split timing (time is not accumulating), press. Press to resume, or press/hold to reset to zero. Displays minutes, seconds and hundredths up to 100 minutes (99:59.99).

COUNTDOWN TIMER

A. Press to increase MINUTES. Hold to increase rapidly up to 99 minutes. B. Press , countdown begins. You may switch to another mode without affecting timer. (hourglass symbol appears in TIME OF DAY window while timer is counting.) Even in another mode, timer will beep when it reaches zero. Press any button to cancel beep. C. To stop timer, press (MUST BE IN TIMER MODE). D. Press to continue, or press to reset timer to original setting.

COMPASS CALIBRATION

IMPORTANT: Watch must be calibrated before using to find directions! This product incorporates the magnetic sensor technology of PRECISION NAVIGATION, INC., Mountainview, CA. A compass works with the Earths magnetic field; therefore you must not be in or near large metallic objects (such as automobiles, bridges, etc.) or objects that give off electromagnetic radiation (such as TV sets), which could interfere with the watchs calibration or use. You cannot calibrate or obtain accurate readings from inside buildings, trains, or airplanes. Typical accuracy of wrist-worn instruments is within +/- 10 degrees. To optimize accuracy, an optional two-step calibration is recommended, and discussed in further detail below. In calibrating and taking subsequent headings, it is important as with all compasses, to maintain a level plane relative to the earths horizon. Performing calibration or taking a heading when the watch is not level can result in large heading errors.* Care must also be taken to avoid areas which may exhibit higher than normal concentrations of hard and soft iron. This is especially true given the relatively weak magnetic field of the earth, relative to other sources of magnetic fields. Failure to do so can result in inaccurate headings. Whenever a heading value is suspect, a new calibration should be performed. It is also recommended that calibration be performed in the intended area of use, or when the watch has been stored for an extended length of time. Care should be taken to avoid storing the watch near any source of magnetism (computers, appliances, TVs, etc.), as the watch can take on a magnetic charge and render subsequent headings inaccurate. When the watch is suspected of having taken on a magnetic charge, a new calibration should be performed. Applying good maintenance procedures, periodic calibration, and observing the guidelines as outlined above will help to insure headings are accurate to within the limitations of the immediate environment. A. To calibrate for magnetic north, press and hold HEADING (from TIME OF DAY mode only) until ROTATE WATCH TWICE appears in the display. B. Hold watch level relative to the horizon (on your wrist, in your palm, or on a non-metallic table). Rotate watch slowly two complete rotations (taking at least fifteen seconds per rotation). Press MODE when finished. (Two-step calibration: Upon completion of STEP A, press HEADING. Do not enter a value for declination angle. While in TIME OF DAY mode, press HEADING. A heading will be displayed. Noting heading value, adjust watch position for heading of 150 degrees. Initiate calibration by pressing and holding HEADING until ROTATE WATCH Twice is displayed. Repeat calibration procedure as discussed in Step A. At completion of calibration proceed normally to Step C.) C. Watch will then call for you to enter DECLINATION. Pressing HEADING will exit calibration mode and leave watch set to measure magnetic north. Entering a declination value instead will allow the watch to point to true north, by adjusting for the angle, which varies for different spots on the globe. D. To set watch for true north, enter declination angle for your location from the chart below. Press START to advance flashing TENS OF DEGREES, press MODE to select DEGREES, then START to advance. Press MODE to select direction, then START to switch between E and W. Press HEADING to exit calibration and save new values. TABLE 1. Declination angles for major world cities: Anchorage.22E Atlanta. 4W Bombay. 1W Boston.16W Calgary.18W Chicago. 3W Denver.10E Jerusalem. 3E London. 4W Little Rock Munich. 3E Seattle.19E Shanghai. 5W Toronto.11W Vancouver.20W Washington DC.10W Waterbury, CT.14W Livingston, MT.14E. 1E New York City.14W Orlando. 5W Oslo. 2W Paris. 2W Rio De Janeiro. 21W San Francisco.15E

For further declination angle information, see the TIMEX website www.timex.com.
Finding Direction A. Hold watch level relative to the horizon, in any mode but ALARM. Press HEADING to display compass heading pointed to by red arrow on watch face (12 oclock position). You may wish to turn bezel around watch face to correspond to measured direction. Press HEADING again to cancel heading display. B. When pressing HEADING to obtain heading, watch may display HOLD TO CAL instead of a heading if calibration is needed. You can recalibrate at your option, see instructions above. *Some watch models have a leveling bubble above the 12 oclock/N position to assist in calibrating the compass. Watch is level when the bubble is centered in the lens.

INDIGLO NIGHT-LIGHT

Press to activate light. Patented (U.S. pat. 4,527,096 and 4,775,964) electroluminescent technology used in the INDIGLO night-light illuminates entire watch face at night and in low light conditions.

NIGHT-MODE FEATURE

Your Timex watch is equipped with NIGHT-MODE. This Timex patented feature (U.S. Patent Number 4,912,688) enhances the benefits of the INDIGLO night-light. Once activated, any button pushed will cause INDIGLO night-light to stay on for 3 seconds. NIGHT-MODE is activated by pressing/holding for 3 seconds. Watch will beep, indicating you are in NIGHT-MODE. NIGHTMODE will stay activated for 7-8 hours or until you deactivate it by pressing/holding again for 3 seconds.
WATER & SHOCK RESISTANCE
If your watch is water-resistant, meter marking or ( Water-Resistance Depth 100m/328ft
*pounds per square inch absolute

) is indicated.

p.s.i.a.* Water Pressure Below Surface 160
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER WATER. 1. Watch is water-resistant only as long as lens, push buttons and case remain intact. 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water. 4. Shock-Resistance: If your watch is shock-resistant, it will be indicated on the watch face or caseback. Timex shock-resistant watches are designed to pass the ISO test for shock-resistance. However, avoid damaging the lens.

LANYARD-CLIP

Some models include a detachable lanyard and stainless steel clip which may be used to clip the watch to your belt, pocket, etc.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. If applicable, push reset button when replacing battery. Battery type is indicated on caseback. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage. DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

TIMEX INTERNATIONAL WARRANTY
(U.S. LIMITED WARRANTY PLEASE SEE FRONT OF INSTRUCTION BOOKLET FOR TERMS OF EXTENDED WARRANTY OFFER) Your TIMEX watch is warranted against manufacturing defects by Timex Corporation for a period of ONE YEAR from the original purchase date. Timex and its worldwide affiliates will honor this International Warranty. Please note that Timex may, at its option, repair your watch by installing new or thoroughly reconditioned and inspected components or replace it with an identical or similar model. IMPORTANT PLEASE NOTE THAT THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGES TO YOUR WATCH: 1) after the warranty period expires; 2) if the watch was not originally purchased from an authorized Timex retailer; 3) from repair services not performed by Timex; 4) from accidents, tampering or abuse; and 5) lens or crystal, strap or band, watch case, attachments or battery. Timex may charge you for replacing any of these parts. THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. TIMEX IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some countries and states do not allow limitations on implied warranties and do not allow exclusions or limitations on damages, so these limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country and state to state. To obtain warranty service, please return your watch to Timex, one of its affiliates or the Timex retailer where the watch was purchased, together with a completed original Watch Repair Coupon or, in the U.S. and Canada only, the completed original Watch Repair Coupon or a written statement identifying your name, address, telephone number and date and place of purchase. Please include the following with your watch to cover postage and handling (this is not a repair charge): a US$ 7.00 check or money order in the U.S.; a CAN$6.00 cheque or money order in Canada; and a UK2.50 cheque or money order in the U.K. In other countries, Timex will charge you for postage and handling. NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE IN YOUR SHIPMENT. For the U.S., please call 1-800-448-4639 for additional warranty information. For Canada, call 1-800-263-0981. For Brazil, call 0800-168787. For Mexico, call 01-800-01-060-00. For Central America, the Caribbean, Bermuda and the Bahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091. For the U.K., call 687 9620. For Portugal, call 946 017. For France, call 42 00. For Germany, call +88 92130. For the Middle East and Africa, call 971-4-310850. For other areas, please contact your local Timex retailer or Timex distributor for warranty information. In Canada, the U.S. and in certain other locations, participating Timex retailers can provide you with a postage-paid, pre-addressed Watch Repair Mailer for your convenience in obtaining factory service.

THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203. Please read instructions carefully to understand how to operate your Timex watch. Your model may not have all of the features described in this booklet.

START WATCH

Important: Set date first! Remove guard from crown and push in.

SET DAY

MIDDLE

WE D 14

WED 14
Pull crown to MIDDLE position and turn CLOCKWISE until correct day appears. If day does not change, pull crown to out position and turn CLOCKWISE or COUNTERCLOCKWISE through necessary number of 24 hour periods until correct day appears. Go to Section 3 to set date.

SET DATE

QUARTZ

1:00 am

7:30 pm
3-Position Crown: Pull crown to MIDDLE position and turn CLOCKWISE or COUNTERCLOCKWISE until correct date appears. 2-Position Crown: Pull crown to OUT position and turn CLOCKWISE until date changes (approx. 1:00 a.m.). Then turn COUNTERCLOCKWISE to 7:30 p.m. Repeat until correct date appears. Adjust date when month has less than 31 days.

SET TIME

Pull crown all the way out and turn to correct time. Push crown in to restart. Watches with date: Note correct time of day (A.M. or P.M.) for proper date function.

SET ALARM

Your Indiglo Easy Set Alarm watch has an Over 60-Minute Alarm which will ring twice per day at desired hour and minute and an Under 60-Minute Alarm which will ring every hour at desired minute. SETTING Over 60-Minute Alarm: With ALARM CROWN in position (A), turn CROWN or RING in either A B direction moving corresponding hour and minute markers to desired C alarm time. To activate alarm pull ALARM CROWN out to position (B). A single beep will sound and the INDIGLO night-light will blink indicating that the Over 60-Minute Alarm is activated. Alarm will sound at desired time and repeat every twelve hours unless deactivated. To silence and/or deactivate alarm, push ALARM CROWN in to position (A). Unless deactivated, alarm will automatically stop ringing each time after 20 beeps.
SETTING Under 60-Minute Alarm: With ALARM CROWN in position (A), turn CROWN or RING in either direction moving corresponding minute marker to desired time. Hour marker can be positioned anywhere on the dial for Under 60-Minute Alarm to work. To activate alarm pull ALARM CROWN out to position (C). Three beeps will sound and the INDIGLO night-light will blink indicating alarm is activated. Alarm will sound at desired minute and will repeat every hour on specified minute unless alarm is deactivated. To silence and/or deactivate alarm, push ALARM CROWN in to position (A). Unless alarm is deactivated, it will automatically stop ringing each time after 20 beeps.

INDIGLO NIGHT-LIGHT

Press crown to activate light. Patented (U.S. pat. 4,527,096 and 4,775,964) electroluminescent technology used in the INDIGLO nightlight illuminates entire watch face at night and in low light conditions.

WATER RESISTANCE

If your watch is water-resistant, meter marking or ( Water-Resistance Depth 30m/98ft 50m/164ft 100m/328ft 200m/656ft
*pounds per square inch absolute

) is indicated.

p.s.i.a.* Water Pressure Below Surface 160 284
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR WATCH IS INDICATED AS 200 METER WATER-RESISTANT. 1. Watch is water-resistant only as long as crystal, crown and case remain intact. 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water. 4. Shock-resistance will be indicated on the watch face or caseback. Watches are designed to pass FTC test for shock-resistance. However, care should be taken to avoid damaging crystal.

BRACELET ADJUSTMENT

Fig. 1

Fig. 2

Fig. 3
FOLDOVER CLASP BRACELET Find spring bar that connects bracelet to clasp. Using a pointed tool (Fig. 1), push spring bar in and gently twist bracelet to disengage. Determine wrist size, then insert spring bar in correct bottom hole (Fig. 2). Push down on spring bar, align with top hole and release to lock in place (Fig. 3). Bracelet Link Removal Removing Links: Place bracelet upright and insert pointed tool in opening of link. Push pin forcefully in direction of arrow until link is detached (pins are designed to be difficult to remove). Repeat until desired number of links are removed. Reassembly: Rejoin bracelet parts. Push pin back into link in opposite direction of arrow. Press pin down securely into bracelet until it is flush. SOLID LINK BRACELET Removing Links: Using a very small screwdriver, remove screws by turning COUNTERCLOCKWISE. Repeat until desired number of links are removed. Do not remove links adjacent to clasp. Reassembly: Rejoin bracelet parts and insert screw in end of opening where it was removed. Turn screw clockwise until tight and flush with bracelet.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. If applicable, push reset button when replacing battery. Battery type is indicated on caseback. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage. DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.
TIMEX INTERNATIONAL WARRANTY
(U.S. LIMITED WARRANTY PLEASE SEE FRONT OF INSTRUCTION BOOKLET FOR TERMS OF EXTENDED WARRANTY OFFER) Your TIMEX watch is warranted against manufacturing defects by Timex Corporation for a period of ONE YEAR from the original purchase date. Timex and its worldwide affiliates will honor this International Warranty. Please note that Timex may, at its option, repair your watch by installing new or thoroughly reconditioned and inspected components or replace it with an identical or similar model. IMPORTANT PLEASE NOTE THAT THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGES TO YOUR WATCH: 1) after the warranty period expires; 2) if the watch was not originally purchased from an authorized Timex retailer; 3) from repair services not performed by Timex; 4) from accidents, tampering or abuse; and 5) lens or crystal, strap or band, watch case, attachments or battery. Timex may charge you for replacing any of these parts. THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. TIMEX IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some countries and states do not allow limitations on implied warranties and do not allow exclusions or limitations on damages, so these limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country and state to state. To obtain warranty service, please return your watch to Timex, one of its affiliates or the Timex retailer where the watch was purchased, together with a completed original Watch Repair Coupon or, in the U.S. and Canada only, the completed original Watch Repair Coupon or a written statement identifying your name, address, telephone number and date and place of purchase. Please include the following with your watch to cover postage and handling (this is not a repair charge): a US$ 7.00 check or money order in the U.S.; a CAN$6.00 cheque or money order in Canada; and a UK2.50 cheque or money order in the U.K. In other countries, Timex will charge you for postage and handling. NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE IN YOUR SHIPMENT. For the U.S., please call 1-800-448-4639 for additional warranty information. For Canada, call 1-800-263-0981. For Brazil, call 0800-168787. For Mexico, call 01-800-01-060-00. For Central America, the Caribbean, Bermuda and the Bahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091. For the U.K., call 687 9620. For Portugal, call 946 017. For France, call 42 00. For Germany, call +88 92130. For the Middle East and Africa, call 971-4-310850. For other areas, please contact your local Timex retailer or Timex distributor for warranty information. In Canada, the U.S. and in certain other locations, participating Timex retailers can provide you with a postage-paid, pre-addressed Watch Repair Mailer for your convenience in obtaining factory service.