Analog Watches User's Manual

Display and functions

Seconds hand Minute hand Hour hand Date* Day* * According to model
* Models with a screwed crown: IA Initial position (screwed down, not pulled out) IB Winding position (unscrewed, not pulled out)

w w w. t i s s o t. ch

1 _EN / 12.09

Analog Watches

Congratulations
We would like to congratulate you on having chosen a watch from TISSOT, one of the most highly renowned Swiss brands in the world. Meticulously designed, using only the highest quality materials and components, your watch is protected against shock loads, variations in temperature, water and dust. To ensure that your watch operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided hereafter. This instructions are valid for all TISSOT mechanical (hand-winding or automatic), quartz, solar quartz or autoquartz watches. Please refer to the explanations relating specifically to your own model of watch.
TISSOT Quartz watches benefit from the incomparable precision of quartz. Their power reserve usually enables them to operate for more than 2 years in continuous use. All you have to do is to set the time, and occasionally also the date if your watch is equipped with a display of this kind (refer to the section on Settings). E.O.L. (End of Life) function Once it has been used up, the battery should be replaced without delay. If the seconds hand jumps every 4 seconds, this indicates that the battery has reached the end of its useful life and should be replaced in the very near future. TISSOT Autoquartz watches benefit from an unusual innovation which combines auto-recharge with the incomparable precision of quartz, but without a battery. In keeping with an automatic watch, the energy required for your watch to operate is generated by the movement of an oscillating weight. However, in this particular model, mechanical energy is transformed into electrical power by a micro-generator which recharges an accumulator. The accumulator, monitored by an electronic circuit, supplies power to the movement. With its charge at maximum, the power reserve of your watch can reach 60days for ladies models, and 100 days for mens models. The advantages of Autoquartz technology Up-to-date technology with impeccable environmental credentials (no battery), the precision of quartz, exceptional autonomy. Power supply The lithium accumulator has a service life of more than 10years. Never replace it with a conventional silver-oxide battery because this would irrevocably destroy the movement. E.O.E. (End of Energy) function Your TISSOT Autoquartz watch is equipped with an E.O.E. (End of Energy) type of energy requirement indicator. If the seconds hand jumps every 4 seconds, this indicates that your watch has run down and needs to be recharged. At this point, it still has a power reserve of between 16 and 24hours, depending on the model.

Winding

Models with a screwed crown To ensure that they remain water-resistant, some models are fitted with a screwed crown. Before setting the time or date* or day*, you must first unscrew the crown into position IB before you can pull it out into position II or III. Important: After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant. Hand-winding or automatic watches The hand-winding watches must be wound each day. Turn the crown clockwise into position I (or IB for watches with a screwed crown) or move your watch from side to side a few times if it is an automatic model. Quartz watches Quartz watches are powered by battery and do not require any winding. Autoquartz watches Turn the crown into position I (or IB for models with a screwed crown) for at least 1 minute, the time it takes for your watch to restore normal operation. It will then have a power reserve of between 16 and 24 hours. To recharge your watch quickly, move it from side to side a few times. Solar watches To recharge the accumulator, expose your watch face to either sunlight or artificial light (no crown winding).

Care and maintenance

We would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water, rinse it in fresh water and leave it to dry completely. Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields. We would advise you to have your watch inspected every 3 to 4 years by an approved TISSOT representative or retailer. To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSOT representative or retailer. Quartz or Autoquartz watches

Settings

Note: Please take due account of the previous information if your watch is fitted with a screwed crown. Setting the time Pull the crown out to position III and turn it clockwise or counterclockwise to set the desired time. On some models with a seconds hand, you can synchronize it with an official time signal (radio/ TV/Internet). When the crown is pulled out in position III, the seconds hand is stopped. As soon as the time setting has been synchronized, push the crown back down into position I (and tighten it back down on models with a screwed crown). Fast correction of the date* and day* Pull the crown out to position II and turn it clockwise until the correct date is displayed, counterclockwise until the correct day is displayed. During this operation, your watch will continue to function normally, so you will not need to alter the time.
If you envisage not wearing your watch for several weeks or months, we would advise you to put it to one side with the crown pulled out to the last stop. This will substantially reduce power consumption.
Collection and treatment of end of life quartz watches* This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By following this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve natural resources. Battery type: button-type zinc-silver oxide primary battery cell. Autoquartz: button-type lithium-manganese dioxide primary battery cell. *valid in the EU member states and in any countries with corresponding legislation.

Technical information

TISSOT Automatic watches gain their energy from an oscillating weight which is activated in response to movements of your wrist. This movement ensures that the watch retains the correct time. Automatic watches do not need a battery. Depending on the models, the power reserve ranges from 40 to 46hours. Note: Accuracy is influenced by the way the watch is worn.

Analog Watches with alarm User's Manual

Display and functions

Hour hand Minute hand Seconds hand Alarm hand Date indicator Alarm switch
Crown with 3 positions (7): I Neutral position (not pulled out) II Setting position for date (unscrewed*, half pulled out) III Setting position for time (unscrewed*, completely pulled out).
* Models with a screwed crown: IA Initial position (screwed down, not pulled out) IB Neutral position (unscrewed, not pulled out)

w w w. t i s s o t. ch

1 _EN / 12/ 09
Analog Watches with alarm

Congratulations

We would like to congratulate you on having chosen a watch from TISSOT, one of the most highly renowned Swiss brands in the world. Meticulously designed, using only the highest quality materials and components, your watch is protected against shock loads, variations in temperature, water and dust. Unusually easy to set and use, your watch is fitted with a quartz movement with an hours-minutes-seconds-date display and a rare and refined alarm function. To ensure that your watch operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided hereafter.This user's manual is applicable to all analog quartz watches TISSOT fitted with an alarm.

Setting the time

Crown in position III To set the time forwards or backwards, simply turn the crown in the appropriate direction. The date changes just after midnight is reached. Notes: The seconds hand is stopped whenever the crown is in position III. The crown must not be left in position III: this increases power consumption!
Rapid correction of the date
Crown in position II The date can be corrected rapidly by turning the crown backwards (counter-clockwise).

Setting the alarm time

Crown in position II The alarm time is set by turning the crown forwards (clockwise).
Switching ON / OFF the alarm
Crown in position I OFF Neutral position: alarm off. ON Pulled out position: alarm on (confirmed by a beep).

Care and maintenance

We would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water, rinse it in fresh water and leave it to dry completely. Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields. To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSOT representative or retailer. TISSOT Quartz watches benefit from the incomparable precision of quartz. Their power reserve usually enables them to operate for more than 2 years in continuous use. Replacing the battery Once the battery has run flat, it must be replaced without delay by an approved TISSOT representative or retailer. Battery type: button-type zinc-silver oxide primary battery cell, Renata 396 / Service life: about 3 years. Collection and treatment of end of life quartz watches* This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By following this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve natural resources. *valid in the EU member states and in any countries with corresponding legislation.