Foodservice Equipment

Job Item#
Sandwich and Panini Grills
Non-Stick Coated Surface: A710SA, A710PA
Standard Features: Adjustable from paper thin to 2 thickness Top locks at desired thickness Use top & bottom or bottom heat only Grease receptacle Handles for portability Bottom cook surface 12-7/8 D x 14-1/16 W Top cook surface 12 D x 13-1/16 W

A710SA

Model Shown: May ship UPS
Application: Toastmaster A710 Series Sandwich and Panini grills are designed to uniformly grill both sides of a sandwich at the same time. To add to the grills versatility, the bottom grill can be heated alone. General Information: Light-duty elecric grill with simultaneous top and bottom grilling eliminates flipping sandwiches. Overall dimensions are: 17 W x 18-1/2D x 11 3/4 H Neoprene feet are provided. Models A710 and A710S feature smooth upper and lower grill plates. Model A710P features grooved upper and lower plates. Construction: Construction is of formed and welded sheet steel. Grill plates are of cast aluminum. An 8 oz. capacity grease receptacle at the rear is easily removable for emptying and cleaning. Model A710 features grill plates with a natural aluminum finish. Models A710S and A710P feature grill plates with a DuPont SilverStone Supra nonstick flouropolymer coating. Capacity: Grills up to 4 sandwiches at one time. Heating: A preformed tubular heating element is clamped beneath the grill on each of the top and bottom grill plates. Controls: Controlled by an adjustable thermostat with a range of 150o F to 450o F with an OFF position. A three position switch is provided to turn the unit off, operate the bottom grill only, or operate both top and bottom grills. The top grill can be adjusted from paper-thin to thick sandwich heights and locked into place to provide consistent result. Electrical: Total rated input is 1.65 KW (0.65 KW top element, 1.0 KW bottom element). Available in 120V, 208V or 240V. All units are single-phase and are equipped with a 3 foot (914mm) cord and NEMA plug. Refer to the electrical specifications table on the reverse side of this sheet.

A710PA

Coating: Model A710 features grill plates with a natural aluminum finish. Models A710S and A710P feature grill plates with a DuPont SilverStone Supra nonstick fluoropolymer coating. SilverStone Supra is the most durable nonstick system of the DuPont SilverStone family of nonstick coatings. The coating was designed for small electric appliances and top-of-range cookware, and works well for a variety of commercial food processing applications where resistance to heat and abrasion are important. It three-coat application system complies with FDA regulations governing direct food contact. SilverStone Supra is a registered trademark of DuPont. All rights are reserved. Warranty: Warranted for one year covering parts and labor. Call factory for warranty authorization.
Toastmaster 10 Sunnen Dr. St. Louis, MO 63143 www.toastmastercorp.com Toll Free: 1-800-264-7827 Telephone: 1-314-781-2777 Toll Free Fax: 1-800-264-6666 Fax: 314-781-3636
181/2 (470mm) 135/16 (338mm)

21/8 (54mm)

113/4 (298mm)

123/8 (314mm) 17 (432mm)

(16mm)

24 (610mm)

65/8 (168mm) 113/8 (298mm) 18 (457mm)

33/8 (86mm)

INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE.
Toastmaster, in line with its policy to continually improve its product, reserves the right to change materials or specifications without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased equipment.

TM114/1060