A EPT icon. B Your current position.

Calibration

Calibration is done automatically and requires no interaction from you. However, it is useful to have a basic understanding of the calibration procedure. Your TomTom GO resets the positioning sensors each time the device is switched on. To help improve accuracy in estimating your location, your GO calibrates the sensors throughout your trip. The following conditions are required for successful calibration: Your GO is receiving a strong GPS signal. The car has been stationary for at least 5 seconds and then travels along a straight and level section of road for at least one minute.

Making your first trip

Planning a route with your TomTom GO is easy. To plan your first route, follow the steps below. Important: You should always plan your journey before you start driving. It is dangerous to plan a route while driving. 1. Tap the screen to bring up the main menu. Note: The buttons on your GO are shown in full color unless a button is currently unavailable. For example, the button named Find alternative. in the Main Menu is not available until you have planned a route. 2. Tap Navigate to.

3. Tap Address.

When you enter an address, you can choose from the following options: City center - tap this button to set your destination as the center of a city or town. Street and house number - tap this button to set an exact address as your destination. ZIP code - tap this button to enter a ZIP code as your destination. Cross street or intersection - tap this button to set your destination as the point where two streets meet. Spoken address - tap this button to set your destination by announcing the address to your GO. For more information, see Spoken address (21). Note: Spoken address entry is supported on TomTom GO 920 and 920T.
For your first trip, we will enter an exact address. 4. Tap Street and house number.
Note: When planning a trip for the first time your GO asks you to choose a state or country. Your choice is saved and used for all routes you plan. You can change this setting at any time by tapping the state symbol or country flag. 5. Start to type the name of the town where you want to go.

For information about setting your Home location, see Change Home location (52). Tap this button to select a Favorite as your destination. For more information about Favorites, see Favorites (32).

Favorite

Tap this button to enter an address as your destination.

Address

Tap this button to select your destination from a list of places you have recently used as destinations.

Recent destination

Tap this button to navigate to a Point of Interest (POI). For more information about POIs and navigating to a POI, see Points of Interest (38).

Point of Interest

Tap this button to select your GPS position, as your destination. For more information about GPS, see Global Positioning System (GPS) (88).

GPS position

Tap this button to select a point on the map as your destination using the map browser.

Point on map

For more information about the map browser, see Driving View (6). Tap this button to enter a destination using latitude and longitude values.

Latitude Longitude

Tap this button to navigate to the current position of a TomTom Buddy. Dont forget that the Buddy may move before you reach him.

TomTom Buddy

For more information about TomTom Buddies, see TomTom PLUS (65).
Tap this button to select your last recorded position, as your destination.

Position of last stop

For more information about the GPS, see Global Positioning System (GPS) (88).

Spoken address

Note: Spoken address entry is available for TomTom GO 920 and 920T. Instead of typing addresses, you can now enter an address by speaking to your GO. Note: The speech recognition feature is currently only available for entering addresses and for responding to special notifications. In the Main menu tap Navigate to., then tap Address, then tap Spoken address or Spoken address (dialog) and speak when prompted.
For more information, see Spoken address (21)

Spoken address (dialog)

Planning a route in advance

You can also use your GO to plan trips in advance by selecting both your starting point and your destination. You could, for example, do the following: Find out how long a trip is going to take before you start. Check the route of a trip you are planning. Check a route for someone who is coming to visit you so you can explain the route to them. To plan a route in advance, follow these steps: 1. Tap the screen to bring up the main menu. 2. Tap the arrow button to move to the next menu screen and tap Prepare route.

Prepare route

3. Select the starting point for your trip in the same way that you would select your destination. 4. Set the destination for your trip. 5. Choose the type of route that should be planned. Fastest route - the route which takes the least time.
Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city. Avoid freeways - a route which avoids freeways. Walking route - a route designed for making the trip on foot. Bicycle route - a route designed for making the trip on a bicycle. Limited speed - a route for a vehicle which can only be driven at a limited speed. You have to specify the maximum speed. 6. Your TomTom GO plans the route between the two locations you selected.
More information about a route
You can access these options for the route you last planned, by tapping View route in the Main Menu. To find out about your route in detail, tap the Details button on the route summary screen. You can then select from the following options: Tap this button for a list of all the turn instructions on the route. This is very useful if you need to explain a route to someone else.

Browse as text

Tap this button to see each turn in the trip. Tap the right and left arrows to move forwards and backwards through the trip.

Browse as images

Tap the screen to turn off the 3D display and view the map from above. Tap this button to see an overview of the route using the map browser. For more information about the map browser, see Driving View (6).

Avoid part of route

You then choose the road you want to avoid from a list of the roads on your route. Tap this button to recalculate your route so that it avoids traffic problems as much as possible. Your GO will check if there are any traffic problems on your route and work out the best route to avoid the problems.

Minimize traffic delays

For more information about using TomTom Traffic, see TomTom Traffic (73).

Sounds and voices

The sound on your TomTom GO is used for features such as: Spoken instructions Hands-free calls Warnings Music For information on making hands-free calls on your GO, see Hands-free calling (46). For information on playing music on your GO, see Music and Media (26)
How do I change the volume level?
You can change the volume in three ways: Tap the bottom left hand area of the Driving View. The last spoken instruction is repeated and the volume level is shown. Move the volume slider to adjust the volume. In the Main Menu, tap Change preferences, then tap Volume preferences. Tap Test to check your changes. You can set your GO to change the volume automatically depending on how noisy it is in the car.
Changing the volume automatically
Your TomTom GO can change the volume automatically. 1. In the Main Menu, tap Change preferences.

Volume preferences

2. Tap Volume preferences. 3. Select Link volume to noise level. 4. Tap Done.

Selecting a voice

To change the voice being used by your TomTom GO, tap Change voice in the Preferences menu and select a voice from the list. Your TomTom GO has two different kinds of voices:

Change voice

Computer voices These are generated by your GO. They provide spoken instructions while you are driving and can pronounce street names and announce messages, traffic reports, weather reports, tips and tutorials. Human voices These are recorded by an actor. Note: Human voices only provide spoken instructions.
How do computer voices work?
Your TomTom GO makes use of text-to-speech technology to generate computer voices. A text-to-speech program converts written text, for example an instruction like Turn right, into the sound of a human voice. The text-to-speech program looks at the whole sentence to make sure that the sound you hear is as close to the real thing as possible. The program is also able to recognize and quite accurately pronounce foreign place and street names. For example, the English voice can read French street names. Note: If you select a Human voice, this will only be able to announce commands, but not street names. If you would like street names to be announced, you will need to select a computer voice.
Internal and external speakers
Your TomTom GO contains a high quality speaker. This is used to play all the sounds on your GO unless you connect to external speakers. You can connect external speakers to your GO in the following ways: Using an audio cable. Note: If your car stereo has a line-in connector, you can play sound from your GO through your car speakers. Connecting a Bluetooth Hi-Fi headset or speakers. Tuning the FM Transmitter in your GO to use your car radio speakers.

Music and Media

Important: Only select music and media when you are stationary. It is dangerous to select songs and make adjustments while you are driving. Your TomTom GO can play mp3 audio files and Audible Audiobooks and display HTML and text documents and photos.
Putting Music and Photos on Your GO
Transfer music files and photos to your TomTom GO from your computer using TomTom HOME. For information about using TomTom HOME, see Using TomTom HOME (89)
Playing Music and Audiobooks
1. Tap Music and media in the Main Menu. 2. Tap TomTom Jukebox to start the Jukebox. Note: You can create playlists using a third-party application like iTunes, Musicmatch or Winamp. Playlist - tap this button to select a playlist. Artist - tap this button to select a song by a particular singer or group. Album - tap this button to select from a list of all the albums on your GO. Song - tap this button to select from all the songs on your GO. Genre - tap this button to select a particular type of music. Audiobooks - tap this button to select an Audiobook. Note: Not all mp3 files contain information about the song, such as the artist or genre. If the file contains no information, the file name is used as the song title.

Now Playing

As soon as you choose a song or Audiobook, your TomTom GO starts playing that song, followed by the rest of the songs in the list.
A Information about the song. B Volume - change the volume by moving the slider. C The Options button. You can, for example, choose to repeat a song and shuffle the songs. You can change these options: Shuffle songs - the next song is selected randomly. Repeat song - repeat the current song. Reduce brightness - brightness is only reduced on the playing screen. Show music button in Driving View - enables fast access to your music. Automatically switch to Driving view - when a song begins playing, the Driving View is shown. Slideshow - your photos are shown while your music is playing. D Go to the previous or next song. E Play or Pause the selected song. F Tap the Back button to go back to the TomTom Jukebox player. The music will continue to play unless you tap the button Playing. in the Jukebox to stop the music. When you listen to Audiobooks, you will see buttons for going to the next and previous chapter. When you stop listening to an Audiobook, your GO remembers where you stopped. To find out more about Audiobooks, go to the shop area in TomTom HOME.

Add as POI

Tap this button to correct the location shown at the cursor position.

Correct location

Points of Interest
Points of Interest or POIs are useful places on the map. Here are some examples: Restaurants Hotels Museums Parking garages Gas stations

Showing POIs on the map

1. Tap Show POIs on map in the Preferences menu.

Show POI on map

2. Select the POI categories to display on the map. Tap Find to search for a POI by name. 3. Tap Done. The POIs you have selected are shown as symbols on the map.

Calling a POI

Your TomTom GO knows the phone numbers for many POIs. You can, for example, call a restaurant to book a table. For information about using your TomTom GO for hands-free calling, see Hands-free calling (46).

Navigating to a POI

You can use a POI as your destination. For example, if you are traveling to an unfamiliar city, you could choose a POI to help find a parking garage. 1. Tap the screen to bring up the main menu. 2. Tap Navigate to. in the Main Menu. 3. Tap Point of Interest. 4. Tap POI in city. 5. Narrow your choice of POIs by selecting the area where the POI is located.
You can select one of these options: POI near you - to choose from a list of POIs near to your current location. POI in city - to find a POI in a particular town or city. POI near Home - to choose from a list of POIs near to your Home location. You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options: POI along route POI near destination 6. Type the name of the town you want to visit and select the town when it appears in the list. 7. Tap Parking garage. 8. Select the category of POI: Tap Any POI category to search for a POI by name. Tap the category of POI, if it is shown. Tap the arrow to choose from the complete list of categories. Select the category from the list or start to type the name of the category and select it when it appears in the list. 9. Select a parking garage. The distance listed next to each POI is the distance from the city center. 10.From the list of POIs shown, select the POI you want to navigate to. The table below explains the distances listed next to each POI. POI near you POI in city POI near Home POI along route POI near destination Last POI Distance from your current location Distance from the city center Distance from your Home location Distance from your current location Distance from your destination Distance to the last POI you visited
If you know the name of the POI, tap Find and type the name. Select it from the list when it is shown. 11.Select a parking garage. The distance listed next to each POI is the distance from the city center. Once you have selected a POI, the route to the POI is calculated by your TomTom GO. The route to the POI is then calculated by your TomTom GO.

Managing POIs

Tap Manage POIs from the Preferences menu.

Manage POIs

Note: The Manage POIs button is only available when all menu buttons are shown. To show all menu buttons, tap Show ALL menu options in the Preferences menu. You can, for example, do the following: Create your own POI categories and add POIs to them. Set warnings when you get close to POIs. Why would I want to create my own POIs? A POI acts like a shortcut - once you have saved a location as a POI you never have to type the address of that POI again. But when you create a POI you can save more than just the location. Phone number - when you create a POI, you can save a phone number with it. Categories - when you create a POI you have to put it in a category. For example, you could create a category of POIs called Favourite restaurants. With each POI, save the phone number so that you can call them from your GO to reserve a table.
How can I create my own POIs?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences. 3. Tap Manage POIs. 4. Before you can add a POI, you have to create at least one POI category. Every POI is assigned to a POI category. You can only add POIs to POI categories you have created yourself. Tap Add POI category.

Add POI category

5. Enter a name for your POI category, for example, Friends or Favourite restaurants. Then select a marker for your POI category. 6. Tap Add POI. Tap this button to add a POI.

Add POI

7. Select the POI category in which you want to add the POI.
8. Select the location of your POI from the list below. You can set your Home location as a POI. If you want to change your Home location, you can create a POI of the Home location before you change it.
You can create a POI from a Favorite. You can only create a limited number of Favorites. If you want to create more Favorites you have to delete some Favorites first. Before you delete a Favorite, make it into a POI so that you dont lose the address. You can specify an address to be a POI. When you enter an address, you can choose from four options. City center Street and house number ZIP code Crossing or intersection Select a POI location from a list of places you have recently used as destinations.

Receiving a Call

If someone calls you while you are driving, accept or reject the call by tapping the screen.

Auto-Answer

You can tell your TomTom GO to answer every call automatically after a certain time. Tap Phone preferences in the mobile phone menu, then tap Auto-answer preferences. Select when your TomTom GO will automatically answer your calls.

Sharing your TomTom GO

To add more phones, do the following. You can establish connections for up to 5 mobile phones. 1. Tap Mobile phone in the Main Menu. 2. Tap Connect to your phone.
3. Tap Find other phone. and follow the instructions on the screen. To switch between phones, tap Connect to your phone and then select your phone from the list.
The available buttons are listed below: Tap this button to redial a telephone number using your mobile phone.

REDIAL

Tap this button to read or write a message.

Read/Write message

Tap this button to configre how your TomTom GO communicates with your mobile phone.

Phone preferences

Tap this button to dial a telephone number using your mobile phone.
Tap this button to load the contacts and phone numbers from your mobile phone onto your TomTom GO.
Get phone numbers from phone
Tap this button to manage the mobile phones that will be connected to your TomTom GO. You can add a profile for up to five different mobile phones.

Manage phones

Preferences
You can change the way your TomTom GO looks and behaves. Tap Change preferences in the Main Menu.
Hidden buttons and features
When you first start using your TomTom GO, all the buttons are shown in the menu. The buttons for the more advanced features can be hidden. This is a useful option because you are unlikely to use certain features very often. Tap this button in the Preferences menu, to reduce the number of buttons that are shown. You might want to do this so that only frequently used buttons are shown.

Show fewer menu options

When you need to use the buttons that are hidden, you can press Show ALL menu options in the Preferences menu to show all buttons. Tap this button in the Preferences menu, to show all the buttons available on your TomTom GO.

Show ALL menu options

Use night colors / Use day colors
Tap this button to reduce the brightness of the screen and show darker colors on the map. When should I use this?

Use night colors

When its dark, it is easier to see the screen if the display on your GO is not brightly lit. To change back to a brighter screen showing brighter colors on the map, tap Use day colors.

Use day colors

Can my GO make this change automatically? Yes. Your GO has a light sensor to tell when it is getting dark. To change to night and day colors automatically, tap Brightness preferences in the Preferences menu. Then select Switch to night view when dark.
Tap this button to set which categories for the Points of Interest (POIs) should be shown on the map. Select the POIs that you want to see on the map from the list.
When you select a POI, it is shown on the map using the symbol you can see next to each category in the list. To find a POI category quickly, tap Find, then start to type the name of the POI category. As soon as the category is shown in the list, you can select it. For more information about POIs, see Points of Interest (38).

Safety preferences

Tap this button to set the following safety preferences: Hide most menu options while driving
Suggest driving breaks Show safety reminders Warn when near places of worship or schools Warn when driving faster than allowed Warn when driving faster than a set speed Warn not to leave the device in the car If you select one or more of the warnings, you will also be asked to select a sound to be played whenever a warning is displayed. Select whether or not your TomTom GO should warn you about which side of the road you should be driving on. Decide if you want the map display to be turned off in special circumstances and press Done. What happens when I use the Turn off map display option? When you turn off the map display, instead of seeing your position on a map in the Driving View, you will only see information about the next instruction. Tap the button and select an option for when the map should be turned off. These are the options: Always - The map will not be shown and you will only see information about the next instruction and arrows showing direction. Above a certain speed - you set the speed at which point the map will be turned off. This option is useful for situations when the map might be distracting, such as when you are driving fast. Never - the map is never turned off.

Voice preferences

Tap Voice preferences to manage your TomTom voices. The following options are available: Change voice - tap this button to change the voice that gives you instructions. A wide range of recorded human voices and computer voices are available. For more information on choosing a voice and the differences between human and computer voices, see Selecting a voice (17). Disable voice - tap this button to disable the use of voices. To enable voices, tap Enable. Speech preferences - tap this button to set the situations when your TomTom will read instructions or warnings aloud. Record voice - tap this button to record your own voice for use by your TomTom. The procedure takes about fifteen minutes, during which time you will say all the commands that are used by your TomTom GO. In the Preferences menu, tap Voice preferences, then tap Record voice and follow the instructions for recording your voice. Disable recorded voice Enable recorded voice Download voice - tap this button to download new voices from TomTom Services and transfer them to your TomTom.
Turn off sound / Turn on sound
Tap this button to turn off spoken instructions. The button changes to Turn on sound. If you turn off the sound, warnings for upcoming POIs are also turned off.

Turn off sound

Tips To change the volume, tap Volume preferences in the Preferences menu. For more information, see Volume preferences (52). To change the volume quickly while you are driving, tap the bottom lefthand section of the Driving View and move the slider. You can still listen to music even if you have turned off voice instructions. For more information, see Selecting a voice (17). Can I still use my GO to make hands-free calls when the sound is turned off? Yes. Turning the sound off does not affect hands-free calling, meaning that you will still be able to talk to and hear the caller.
Tap this button to change the volume for spoken instructions. This setting does not change the volume of the radio, CDs, or music played from an iPod or USB storage device.
Can my GO change the volume depending on how noisy it is in the car? Select Link volume to noise level and your GO will change the volume according to the background noise. The noise level is constantly monitored by the microphone on your GO. If there is a lot of noise in the car, your GO will automatically increase the volume. For example, if you are driving on the motorway, which is often very noisy, the volume level on your GO will be increased. When you are driving more slowly again, the volume level will be lowered by your GO.

Bluetooth preferences

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features (49). Tap this button to disable or enable Bluetooth functionality on your GO. Tap Advanced to set how the Bluetooth connection with your phone will be used.
You can select any of the following options: Enable wireless data Enable hands-free calling In some places, such as hospitals and airplanes, you are required to turn Bluetooth off on all electronic devices.
Disable wireless data / Enable wireless data
This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features (49). Tap this button to block the reception of wireless data. You will still be connected to your mobile phone via Bluetooth and will still be able to receive and make hands-free calls. You will not be able to receive any data that uses a wireless data connection, such as TomTom Traffic.

Disable wireless data

To turn wireless data on again, tap Enable wireless data.

Send/Receive files

This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features (49). Tap this button to send or receive files, such as itineraries and voices, using your GO with other Bluetooth devices.

Edit TomTom PLUS account

Tap this button to log in to your TomTom account. If you have more than one TomTom account or if several people are sharing the same TomTom GO, you can create another TomTom account using a different e-mail address.

Edit MyTomTom account

Battery saving preferences
This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options. For more information, see Hidden buttons and features (49). Tap this button to configure your GO to conserve power when possible. The following options are available: Never turn off screen
Turn off screen between instructions Always turn off screen Then select whether or not you want to Switch off when external power is lost.

Change language

Tap this button to change the language used for all the buttons and messages you see on your GO. You can choose from a wide range of languages. When you change the language, you are also given the opportunity to change the voice.

Set clock

Tap this button to select the type of clock that is shown and set the time. The easiest way to set the time is by tapping the Sync button. Your GO will then take the time from GPS information.

Using RDS-TMC traffic information
Your device receives traffic information when it is broadcasted. If there are any incidents on your route the Traffic sidebar on the right side of the Driving View warns you. An example of a Traffic sidebar with a traffic warning is shown to the left. For information on the Traffic sidebar, see The Traffic sidebar (85). In the example on the left there is a traffic jam on your route with an expected delay of 38 minutes, 20 miles ahead of you. To find the quickest route to your destination, do the following:
1. Tap the Traffic sidebar. Tip: If you have trouble tapping the Traffic sidebar and the Main Menu is being displayed instead of the traffic menu, try tapping your finger half on the Traffic sidebar and half off the screen. 2. Tap Minimize traffic delays. Your device looks for the quickest route to your destination. It is possible that the new route may also include traffic delays, or may even be the same route as before. You can re-plan the route to avoid all delays, but this new route will take longer than the quickest route already shown. 3. Tap Done. Tip: It is possible to let your TomTom device automatically minimize traffic delays for you, to do this, see Changing traffic preferences (82).
Use the Change Traffic preferences button to choose how traffic information works on your device.
To change your traffic preferences, do the following: 1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Change Traffic preferences. You can change the following preferences: Automatically minimize delays after every traffic update - if you select this option, your device automatically recalculates when new delays occur on your route. Beep when traffic situation on route changes - if you select this option your device beeps when a new traffic incident occurs on your current route. Ask for traffic updates when preparing a route - this option has no effect in RDS traffic.
3. Select or clear the check box next to each preference you want to change. 4. Tap Done. Your device lists the countries that have radio stations providing RDSTMC traffic information that you can currently receive. Normally you can leave this set to Any country (strongest signal). For more information about this country setting, see Choosing the correct country for RDSTMC reception (84). 5. Tap Done.
3. Tap Change home-work 4. Set your home location 5. Set your work location. You can now use the Home to work and Work to home buttons of the Show home-work traffic menu.
For example, to check for delays on your route home, do the following: 1. Tap the TomTomTraffic button in the Main Menu on your device. 2. Tap Show home-work traffic. 3. Tap Work to home. The route summary screen is shown. To see if there is a quicker way home, you could now tap the Find alternative button and then tap Minimize traffic delays. Tip: You can let your device automatically look for alternative routes by selecting Automatically minimize delays after every traffic update in your Traffic preferences. For more information, see Changing traffic preferences (82).

Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the product range, can be obtained from an authorised dealer. If the user modifies the equipment or its peripherals in any way, and these modifications are not approved by TomTom, the FCC may withdraw the users right to operate the equipment. For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the US Government Printing Office, Washington, DC 20402. Stock No 004-00000345-4.
FCC Declaration of Conformity
Tested to Comply with FCC Standards for Home or Office Use FCC ID: S4LGO520 IC: 5767A-GO520 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Responsible party in North America TomTom, Inc., 150 Baker Avenue, Concord, MA 01742 Tel: 866 486-6866 option 1 (1-866-4-TomTom) Emissions information for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

C-tick

N14644 This product displays the C-tick to show it complies with all relevant Australian and New Zealand regulations.

Warning for Australia

The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.

This Document

Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright. No part of this document may be photocopied or
reproduced in any form without prior written consent from TomTom International B.V. Part numbers TomTom GO: 4M00.000, 4M00.001, 4M00.002, 4M00.900, 4M00.002, 4M00.006

BEPERKTE AANSPRAKELIJKHEID
9) Noch TomTom noch haar leveranciers zijn aansprakelijk jegens u of jegens derden voor enigerlei schade, voor directe, indirecte of incidentele schade, gevolgschade of schade anderszins (in ieder geval met inbegrip van, maar niet beperkt tot, schade voortvloeiend uit het onvermogen de apparatuur te gebruiken of toegang te verkrijgen tot de gegevens, verlies van gegevens, zakelijk verlies, winstderving, bedrijfsonderbreking en dergelijke) voorkomend uit het gebruik van of het onvermogen om gebruik te maken van de Hardware zelfs indien TomTom of haar leveranciers van de mogelijkheid van schade op de hoogte was gesteld. 10) Ondanks eventuele schade die u, om welke reden dan ook, oploopt (inclusief en zonder beperking alle schade die hierin wordt genoemd en alle directe of algemene schade in contract of anderszins), zal de totale aansprakelijkheid van TomTom en elk van haar leveranciers beperkt zijn tot het bedrag dat u voor de Hardware hebt betaald. 11) TomTom is niet aansprakelijk voor (i) enige vorm van bedrog door haar werknemers en/of agenten, of (ii) enige vorm van misleiding door haar werknemers en/of agenten.
12) In afwijking van het bovenstaande zal de aansprakelijkheid voor dood of letselschade ten gevolge van nalatigheid van een der partijen voor geen der partijen worden beperkt.

Addendum

Important Safety Notices and Warnings
Global Positioning System The Global Positioning System (GPS) is a satellite-based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America which is responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of your TomTom device. TomTom does not accept any liability for the availability and accuracy of GPS. Use with Care Use of a TomTom device for navigation still means that you need to drive with due care and attention. Aircraft and Hospitals Use of devices with an antenna is prohibited on most aircraft, in many hospitals and in many other locations. A TomTom device must not be used in these environments. Battery This product uses a Lithium-Polymer battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 C (140 F). Failure to follow these guidelines may cause the Lithium-Polymer battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at low (below 0 C/32 F) or high (over 45 C/113 F) temperatures. Temperatures: Standard operation: -10 C (14 F) to +55 C (131 F); short period storage: -20 C (-4 F) to + 60 C (140 F); long period storage: -20 C (-4 F) to +25 C (77 F). THE LITHIUM-POLYMER BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE YOUR TomTom ONLY WITH THE SUPPLIED DC POWER LEAD (CAR CHARGER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY CHARGING. To recycle your TomTom unit please see your local approved TomTom service center.

SPECIAL NOTE REGARDING DRIVING IN CALIFORNIA AND MINNESOTA California Vehicle Code Section 26708 (a) (1) provides that No persons shall drive any motor vehicle with an object or material placed, displayed, installed, affixed or applied upon the windshield or side or rear windows. Drivers in California should not use a suction mount on their windshield, side or rear windows. Note: this section of the California Vehicle Code applies to anyone driving in California, not just California residents. Minnesota State Legislature Statutes Section 169.71, subdivision 1, section 2 provides that A person shall not drive or operate with any objects suspended between the driver and the windshield other than sun visors and rearview mirrors and electronic toll collection devices. Note: this Minnesota Stature applies to anyone driving in Minnesota, not just Minnesota residents. TomTom Inc. bears no responsibility for any fines, penalties or damage that may be incurred by disregarding this notice. While driving in any state with windshield mounting restrictions, TomTom recommends the use of the supplied Adhesive Mounting Disk or its Alternative Mounting Kit, which includes multiple options for mounting TomTom devices on the dashboard and using the air vents. See www.tomtom.com for more information about this mounting option.
FCC Information for the User
This product contains a transmitter which must not be co-located or simultaneously operated in conjunction with any other transmitter. Exposure to Radio Frequency Radiation This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Radio and Television Interference This equipment radiates radio frequency energy and if not used properly - that is, in strict accordance with the instructions in this manual - may cause interference to radio communications and television reception. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation distance between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the product range, can be obtained from an authorised dealer. If the user modifies the equipment or its peripherals in any way, and these modifications are not approved by TomTom, the FCC may withdraw the users right to operate the equipment. For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the US Government Printing Office, Washington, DC 20402. Stock No 004-00000345-4.
FCC Declaration of Conformity
Tested to Comply with FCC Standards for Home or Office Use FCC ID: S4LGO520 IC: 5767A-GO520 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Responsible party in North America TomTom, Inc., 150 Baker Avenue, Concord, MA 01742 Tel: 866 486-6866 option 1 (1-866-4-TomTom) Emissions information for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

CE Marking

This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment.

R&TTE Directive

Hereby, TomTom declares that this personal navigation device is in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Hiermit erklrt TomTom, dass dieses persnliche Navigationsgert die grundlegenden Anforderungen und andere relevante Bestimmungen der EURichtlinie 1999/5/EC erfllt. Die Konformittserklrung finden Sie hier: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Par la prsente, TomTom dclare que cet appareil de navigation personnelle est conforme aux principales exigences et autres dispositions applicables de la directive UE 1999/5/CE. La dclaration de conformit peut tre consulte l'adresse suivante : www.tomtom.com/lib/doc/CE DoC__GO920.pdf
TomTom verklaart hierbij dat dit persoonlijke navigatiesysteem voldoet aan alle essentile vereisten en overige relevante bepalingen in de EU-richtlijn 1999/5/EC. De conformiteitsverklaring vindt u hier: www.tomtom.com/lib/doc/CE DoC_GO920.pdf Con la presente, TomTom dichiara che questo dispositivo di navigazione personale conforme ai requisiti essenziali e alle clausole pertinenti della Direttiva 1999/5/EC dell'UE. La dichiarazione di conformit consultabile all'indirizzo: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Por la presente, TomTom declara que este dispositivo de navegacin personal se ha fabricado en conformidad con los requisitos esenciales y otras provisiones relevantes de la Directiva de la UE 1999/5/EC. La declaracin de conformidad puede consultarse en: www.tomtom.com/lib/doc/CE DoC__GO920.pdf TomTom erklrer herved, at denne personlige navigationsenhed er i overenstemmelse med de vsentligste krav og andre relevante bestemmelser i Europa-Parlamentets og Rdets direktiv 1999/5/EF. Overensstemmelseserklringen findes her: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Hrmed frklarar TomTom att denna personliga navigationsenhet uppfyller de grundlggande kraven och andra relevanta freskrifter i EU-direktiv 1999/5/ EG. Konformitetsdeklarationen finns hr: www.tomtom.com/lib/doc/CE DoC__GO920.pdf TomTom tten vakuuttaa, ett tm henkilkohtainen navigointilaite tytt EU-direktiivin 1999/5/EY olennaiset vaatimukset ja sen muut asiaankuuluvat mrykset. Vaatimustenmukaisuusvakuutus lytyy tlt: www.tomtom.com/lib/doc/CE DoC__GO920.pdf A TomTom declara por este meio que este equipamento de navegao pessoal est em conformidade com os requisitos fundamentais e outras clusulas relevantes da Directiva da UE 1999/5/CE. A declarao de conformidade (em ingls) est disponvel em: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Spolenost TomTom tmto prohlauje, e toto osobn navigan zazen spluje vechny nezbytn nleitosti a dal relevantn ustanoven Smrnice EU 99/5/ES. Prohlen o shod naleznete zde: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Spolonos TomTom vyhlasuje, e toto osobn navigan zariadenie vyhovuje zkladnm poiadavkm a alm zkladnm predpisom smernice E 1999/5/EC.Prehlsenie o zhode njdete na: www.tomtom.com/lib/doc/CE DoC__GO920.pdf A TomTom ezennel kijelenti, hogy ez a szemlyi navigcis eszkz megfelel az 1999/5/EC EU irnyelv alapvet kvetelmnyeinek s egyb r vonatkoz rendelkezseinek.A megfelelsgi nyilatkozat a kvetkez helyen tallhat: www.tomtom.com/lib/doc/CE DoC__GO920.pdf Firma TomTom owiadcza, e niniejsze, osobiste urzdzenie nawigacyjne jest zgodne z najwaniejszymi wymaganiami i innymi istotnymi postanowieniami Dyrektywy 1999/5/WE. Deklaracja zgodnoci znajduje si tutaj: www.tomtom.com/lib/doc/CE DoC__GO920.pdf TomTom kinnitab kesolevaga, et see personaalne navigeerimisseade on koosklas EL direktiivi 1999/5/E oluliste nuete ja stetega. Vastavusdeklaratsiooni vt aadressil www.tomtom.com/lib/doc/CE DoC__GO920.pdf

Tento symbol na vrobku alebo jeho balen znamen, e vrobok nepatr do domceho odpadu. V slade so smernicou 2002/96/ES o odpade z elekrickch a elektronickch zariaden (OEEZ) sa toto elektrick zariadenie nesmie odstranovat ako netrieden komunlny odpad. Vrobok odstrnte jeho vrtenm v mieste nkupu alebo odovzdanm v miestnom zbernom zariaden na recyklovanie.

Operation

This equipment may be operated in these countries / Dieses Gert darf in folgenden Lndern betrieben werden / Deze apparatuur mag in de volgende landen worden gebruikt / Cet appareil peut tre utilis dans les pays suivants / Questo dispositivo pu essere utilizzato nei seguenti paesi / Este equipo puede utilizarse en estos pases / Dette udstyr m benyttes i flgende lande / Denna enhet fr anvndas i fljande lnder / Laitetta saa kytt seuraavissa maissa / Este equipamento pode ser utilizado nos seguintes pases / Toto vybaven sm bt pouvno v nsledujcch zemch / Toto vybavenie me by pouvan v tchto krajinch / Ezt a berendezst a kvetkez orszgokban lehet mkdtetni / Urzdzenie zostao dopuszczone do uytku w nastpujcych krajach / Seda seadet saab kasutada jrgmistes riikides / i ranga gali veikti tokiose valstybse / o aparatru drkst lietot ds valsts: AT, CH, CZ, DE, DK, EE, FI, GB, LI, LU, NO, PT, SE

C-tick

N14644 This product displays the C-tick to show it complies with all relevant Australian and New Zealand regulations.

Warning for Australia

The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.

This Document

Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom International B.V. Part numbers TomTom GO: 4M00.000, 4M00.001, 4M00.002, 4M00.900, 4M00.002, 4M00.006

Copyright notices

2007 TomTom International B.V., The Netherlands. Patents Pending. All rights reserved. TomTom and the TomTom logo are registered trademarks of TomTom International B.V., The Netherlands. All other trademarks are the property of their respective owners. Our end user license agreement and a limited warranty apply to this product; they are included in this package. You can also review both at www.TomTom.com/legal

Data Source 2007 Tele Atlas N.V. Based upon: Topografische ondergrond Copyright dienst voor het kadaster en de openbare registers, Apeldoorn 2007. Ordnance Survey of Northern Ireland. IGN France. Swisstopo. BEV, GZ 1368/2007. Geonext/DeAgostini. Norwegian Mapping Authority, Public Roads Administration / Mapsolutions. DAV. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majestys Stationery Office. Crown copyright and/or database right 2007. All rights reserved. Licence number 100026920.
Text to Speech technology, 2007 Loquendo TTS. All rights reserved. Loquendo is a registered trademark. www.loquendo.com
Apple and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Audible, AudibleListener and Audiblemanager are registered trademarks of Audible, Inc. When purchasing and using Audible content you
need to agree to the terms and conditions as posted in the Legal Notices www.audible.com.
SoundClear acoustic echo cancellation software Acoustic Technologies Inc.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit mp3licensing.com
Some images are taken from NASAs Earth Observatory. The purpose of NASAs Earth Observatory is to provide a freely-accessible publication on the Internet where the public can obtain new satellite imagery and scientific information about our home planet. The focus is on Earths climate and environmental change: earthobservatory.nasa.gov/