Table of Contents

Introduction.. 2
Precautions... 2 Features... 7 Choosing a Disc.. 9 Guide to the Owners Manual.. 15 Functional Overview.. 16 Installing Batteries in the Remote Control. 20 HDD / DVD / VCR Modes Switching. 20 Guide to Display Information. 21 Guide to Setup Menu.. 21 Front Panel Display Guide.. 22

Playback..60

Information on Playback.. 60 Basic Playback.. 61 PBC Function for Video CDs. 68 Special Playback.. 69 Repeat / Programme Playback / Slide Show. 73 Search... 74 Selecting the Format of Audio and Video. 75

Editing...77

Guide to the Editing on this Unit. 77 Adding or Deleting Chapter Marks Manually. 78 Creating Titles to a Playlist.. 79 Deleting Titles.. 81 Deleting a Scene of a Title.. 82 Editing Title Names.. 84 Protecting / Undo Protecting Titles.. 85 Combining Titles.. 86 Dividing a Title... 87

Connections... 23

Basic Setup.. 26
For the First Time Use.. 26 OSD Language Setting.. 27 Channel Setting... 27 Setting the Clock.. 30 Selecting the Sound Mode.. 32 Selecting the TV Aspect Ratio.. 32

Function Setup..89

Tour of the Setup Menus.. 89 Initial Setting... 92 Digital Audio Setting.. 93 Playback.. 94 Recording.. 98 Display... 99

Recording.. 34

Information on Supported Media.. 34 Formatting a Disc.. 38 Deleting All Contents in HDD.. 39 Setting Bilingual Recording Audio.. 40 Recording Audio Select (XP).. 41 Basic Recording.. 42 One-touch Timer Recording (OTR). 42 Timer Recording.. 43 Setting External Input Audio.. 46 Satellite Link... 47 Information on Dubbing.. 48 Setting for External Connection (AV3). 56 Dubbing from the External Devices. 56 Finalising a Disc.. 57 Setting Disc Protection.. 58

VCR Functions.100

Playback.. 100 Recording and One-touch Timer Recording (OTR)... 100 Search... 101 Other Operations.. 102 Changing the Video Colour System. 102 Hi-Fi Stereo Sound System. 102

Others..103

Troubleshooting.. 103 Language Code.. 108 Glossary.. 109 Specifications.. 110
E3B90ED_EN.book Page 7 Friday, February 23, 2007 12:38 PM

Dubbing

Features
The following features are available with this unit.
With this unit, you can enjoy bi-directional dubbing with HDD, DVD or VCR. HDD DVD Fast Dubbing [ Page 48] This feature offers you the dubbing speed of 32 times the SLP mode dubbing for DVD-RW / R and 9.6 times the LP mode dubbing for DVD+RW / R at the maximum. Just Dubbing [ Page 54] When dubbing from HDD to DVD, if you set the Rec Mode to Auto, the Rec Mode will automatically be adjusted so the titles will fit nicely in the remaining space of the disc when there is not enough space in the disc. When dubbing from DVD to HDD, the Rec Mode will automatically be adjusted for the titles to fit a 4.7 GB DVD.

Editing Function Setup VCR Functions Others
E3B90ED_EN.book Page 10 Friday, February 23, 2007 12:38 PM

For Playback Only

Disc Mark Specification
8 cm (3 1/4 in.) 12 cm (4 3/4 in.) Region number DVD video
The region number of this unit is 2. The region number marked on the rear panel must correspond to a specific playable area, that is printed on your DVD video disc. If you do not find Region 2 or ALL regions, or the disc is encoded to permit playback only in regions other than Region 2, disc playback will not be allowed by the unit.

Audio CD (CD-DA)

8 cm (3 1/4 in.) 12 cm (4 3/4 in.)
CD-R 12 cm (4 3/4 in.) CD-DA (audio CD) format, MP3, JPEG, DivX files CD-RW Depending on the disc status, playback may not be possible.

Video CD (VCD)

12 cm (4 3/4 in.) Version 1.1 and 2.0
is a trademark of DVD Format/Logo Licensing Corporation. You cannot play discs other than those listed above. You cannot play non-standardised discs even if they may be labelled as above. You cannot play discs with specialised encoding (such as Super Audio CD discs) or the DVD audio portions of DVD Audio discs. Toshiba cannot guarantee that all discs bearing the DVD or CD logos will operate as expected. This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format).
This unit cannot play the DVD-R discs recorded in VR mode (Video Recording Format). Toshiba is not liable for any damage or loss caused directly or indirectly by the malfunction of this unit, including, without limitation, any one of the following: Failure to record contents intended to be recorded by the consumer. Failure to edit contents as intended by the consumer. When a DVD-RW / R disc and DVD+RW / R disc created on this unit is used (e.g., insertion, playback, recording or editing) in another DVD player, recorder or personal computer drive. When a DVD-RW / R disc and DVD+RW / R disc that is used in the manner described in the immediately preceding bullet point is used again in this unit. When a DVD-RW / R disc and DVD+RW / R disc that was recorded in another DVD recorder, or in a personal computer drive is used in this unit. Some functions may not work with personal computer discs. Discs recorded in this unit may not operate as expected on other DVD players, recorders or personal computer drives. Because of problems and errors that can occur during the creation of DVD and CD software and/or the manufacture of DVD and CD discs, Toshiba cannot guarantee that the unit will play every feature of every DVD bearing the DVD logo and/or every CD bearing the CD logo. As one of the creators of DVD technology, Toshiba DVD players are manufactured using the highest standards of quality, and as a result, such incompatibilities are rare.

Select Auto Clock Setting using [Cursor U / D], then press [ENTER].
Initial Setting OSD Language Clock Setting Channel Setting TV Aspect Select Video Video Out Clock Setting Auto Clock Setting --/--/--(---) --:--
E3B90ED_EN.book Page 31 Friday, February 23, 2007 12:38 PM
Select On using [Cursor U / D], then press [ENTER].
Initial Setting OSD Language Clock Setting Channel Setting TV Aspect Select Video Video Out On Off Clock Setting Auto Clock Setting Auto Clock Setting --/--/--(---) --:--

Manual Clock Setting

Follow the steps 1 to 3 in Auto Clock Setting on page 30. Select Clock Setting using [Cursor U / D], then press [ENTER].
Initial Setting OSD Language Clock Setting Channel Setting TV Aspect Select Video Video Out

--/--/--(---)

Clock Setting Auto Clock Setting
Press [SETUP] to exit. Press [ ON / STANDBY] to turn the unit to standby mode.
The Auto Clock function is activated. This unit will search for the time only when the unit is in standby mode. Leave the unit for several minutes to give it time to set the clock.
If you want to cancel Auto Clock Setting, select Off using [Cursor U / D] at step 5, and then press [ENTER]. The default setting of Auto Clock Setting is On. The clock may set itself automatically after you connect the antenna cable to the unit and plug in the mains cable. In this case, the current time will appear on the front panel display. To set the clock automatically, the channel assigned to P01 must receive the PDC signal and the Decoder must be Off. The clock cannot be set automatically if you are not receiving a channel in your area that carries a time signal. In this case, set the clock manually. Once the auto clock setting is performed, the unit will correct the current time by receiving PDC broadcasts whenever the unit is in standby mode. The unit will correct the current time automatically at 8:00, if the unit is in standby mode. From 23:00 to 1:00, the Auto Clock function will not operate even if the unit is in standby mode.
Move to the item you want to set using [Cursor L / P], and change the setting to suit your preference using [Cursor U / D].
Clock Setting -- / -- / ---- (--) -- : --
When all the information is entered, press [ENTER].
Your setting is now activated. Although seconds are not displayed, they will be counted from zero.

Note Function Setup

Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds.

E3B90ED_EN.book Page 36 Friday, February 23, 2007 12:38 PM
This unit cannot record on CD-RW or CD-R discs. DVD-RW / R discs, DVD+RW / R discs and CD-RW / R discs recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the units lens. If you record on a disc using a personal computer, there are cases in which it may not be played back because of the settings of the application software used to create the disc, even if it is recorded in a compatible format. (Check with the software publisher for more detailed information.) Discs recorded in Video mode on this unit cannot record additionally using other DVD recorders. Since the recording is made by the variable bit rate (VBR) method, the actual remaining time for recording may be a little bit shorter than the remaining time displayed on the OSD, depending on the picture you are recording. DVD-RW once formatted with other DVD recorders cannot be recorded on this unit and vice versa. The maximum Fast Dubbing speed is up to 4x for DVD-RW discs and DVD-R discs. During Fast Dubbing, the noise from the unit becomes louder. This is not a malfunction.
Information on Copy Control
Some satellite broadcasts include copy-protected information. If you wish to record them, refer to the following.
Disc type / format Copy- Copy- Copyfree once prohibited

ver. 1.1 / ver. 1.2

DVD-RW ver. 1.1 / ver. 1.2 CPRM compatible
DVD-RW ver. 1.1 / ver. 1.2 CPRM compatible DVD-R DVD+RW DVD+R VCR

ver. 2.0

: Recordable : Not recordable
Restrictions on Recording
You cannot record copy-protected video or a programme broadcasted in the NTSC colour system using this unit. Copy-protected video includes DVDVideos and some satellite broadcasts. If copy-protected material or NTSC signal is detected, recording will pause or stop automatically and an error message appears on the screen. You can only record Copy-once only video using a DVD-RW disc in VR mode with Content Protection for Recordable Media (CPRM). When recording a TV broadcast or an external input, you can display copy control information on the screen. CPRM is a scrambling copy protection system for the protection of copy-once broadcast programmes. This unit is CPRM compatible, which means that you can record copy-once broadcast programmes, but you cannot make a copy of those recordings. CPRM recordings can only be played back on DVD players that are specifically compatible with CPRM. Maximum recordable numbers of title / chapters: HDD: 600 titles per each Playlist and Original 99 chapters per title VR mode DVD: 99 titles per each Playlist and Original 999 chapters per each Playlist and Original Video mode DVD: 99 titles per disc 99 chapters per title +VR mode DVD: 49 titles per discs 254 chapters per disc 99 chapters per title

The icon will appear on the Front Panel Display indicating one or more Timer Recordings are in standby. Press [CLEAR] will reset all the entered information. To set another programme, repeat steps 2 to 4. When programmes are overlapped, a warning message All or part of the programme will not be recorded. will appear. - When icon appears, a part of the programme will not be recorded. - When icon appears, the whole programme will be recorded. For details on overlapped Timer Programmings, refer to Hints for Timer Recording on page 45.
Press [TIMER PROG.] to exit.
You can also press [SETUP] twice to exit.
E3B90ED_EN.book Page 45 Friday, February 23, 2007 12:38 PM
Editing the Timer Programming Information
VPS (Video Programme System) / PDC (Programme Delivery Control)
The Video Programme System (VPS) or Programme Delivery Control (PDC) assures that the TV programmes you have programmed for Timer Recording are recorded exactly from beginning to end, even if the actual broadcasting time differs from the scheduled time due to a delayed start or extension of the programme duration. Furthermore, if a programme is interrupted, the recording will also be interrupted automatically and resumed when the programme starts again. If the VPS / PDC signal drops out because the broadcast signal is weak, or if a broadcasting station does not transmit a regular VPS / PDC signal, the Timer Recording is performed in normal mode (without VPS / PDC) even if it was programmed for VPS / PDC. If the starting time of the VPS / PDC Timer Recording is between 0:00 and 3:59 on a given day, the VPS / PDC function will operate from 20:00 on the previous day to 4:00 on the next day. If the starting time of the VPS / PDC Timer Recording is between 4:00 and 23:59 on a given day, the VPS / PDC function will operate from 0:00 on the given day to 4:00 on the next day. This means that if the relevant programme is broadcasted within this period, it is recorded correctly. If the timer is not programmed correctly, the incorrect timer setting stays in effect unless you cancel it. To cancel an incorrect timer setting, refer to Editing the Timer Programming Information on this page.
HDD Remain 72h00m(SP) 72:00(SP) Skip CH P02 --------------Date Start End 23 : 00 -- : --- : --- : --- : --- : --- : --- : -Mode SP SP SP SP SP SP SP SP HDD HDD HDD HDD HDD HDD HDD HDD 06 (Mon) 22 : 00 -- (---) -- : --- (---) -- : --- (---) -- (---) -- (---) -- (---) -- (---) -- : --- : --- : --- : --- : --
Page 1/4 VPS/PDC Off ---------------
To change the setting of a programme: 1 Select the programme you want to edit using [Cursor U / D], then press [ENTER]. Use [SKIP F] or [SKIP B] to jump to next / previous Timer Programme List page.
HDD Remain 72h00m(SP) 72:00(SP) Skip CH P01 --------------Date Start End 23 : 00 -- : --- : --- : --- : --- : --- : --- : -Mode SP SP SP SP SP SP SP SP HDD HDD HDD HDD HDD HDD HDD HDD 06 (Mon) 22 : 00 -- (---) -- : --- (---) -- : --- (---) -- (---) -- (---) -- (---) -- (---) -- : --- : --- : --- : --- : --

MOVE programme HDD (internal)
The programme does not remain.
If you want to dub programmes from both lists (Original List and Playlist), finish up the dubbing of one list first and then make dubbing of the other list. NTSC dubbing is prohibited in this unit. During Fast Dubbing of copy-once programmes, the following operations are not available: - Playback of the titles in HDD. When any Rec Mode other than Fast is selected, - you only can watch the playback image of the title being dubbed (the audio cannot be changed also). - Elapsed dubbing time will be displayed in the Front Panel Display, but on the TV screen, it only shows --:--:--(--h--m--s). If you stop the bi-directional dubbing between HDD and DVD halfway; - Playing media : Nothing is moved. Contents remain in the media. - Recording media: Nothing is dubbed. With regard to DVD-R, the disc space used for the dubbing process will be lost (even though nothing is dubbed).

programme DVD-RW

Available dubbing direction for copy-once programme:
From To DVD-RW (VR) (CPRM-compatible) HDD (Internal) DVD-RW (VR) (Not CPRM-compatible) DVD-RW (Video) DVD-R / +RW / +R Videotape DVD-RW (VR) HDD (Internal) Videotape HDD (Internal) DVD-RW (VR) (CPRM-compatible) DVD-RW (VR) (Not CPRM-compatible) DVD-R / +RW / +R

*2 *1,*2

One Touch Dubbing

HDD DVD+RW DVD+RW VD+RW

DVD-RW DVD+R DVD+R

Videotape

: Available : Not available *1:The programme (recorded) moves. (It will be deleted from HDD.) *2: You cannot dub the recorded programme to HDD or DVD-RW again. (Copy control signal will be recorded to the videotape.) (Refer to page 36 for details about CPRM.) Fast Dubbing: This unit is compatible with the bi-directional Fast Dubbing between HDD and DVD-RW / R or DVD+RW / R. Fast Dubbing offers you the dubbing speed of 32 times the SLP mode dubbing for DVD-RW / R and 9.6 times the LP mode dubbing for DVD+RW / R. To perform the Fast Dubbing, set the Rec Mode to Fast. (See pages 53 to 54.)
Insert a recordable disc when dubbing from HDD to DVD. Insert a disc to be dubbed when dubbing from DVD to HDD. Start the playback of the contents you want to dub. Press [DUBBING] during playback.
Confirmation message will appear.
The dubbing will start. When One Touch Dubbing is completed, completion message will be displayed on the screen for a few seconds. The dubbing will stop automatically when it reaches the end of the title.
E3B90ED_EN.book Page 49 Friday, February 23, 2007 12:38 PM

To stop One Touch Dubbing manually, follow the instructions below. 1 Press and hold [DUBBING] for 4 seconds. 2 Select Yes using [Cursor L / P], then press [ENTER]. Completion message will appear and the dubbing will stop. 3 Press [ENTER] to remove the message.
There are three ways to start One Touch Dubbing.
The Rec Mode will be set to Auto for the One Touch Dubbing.
One Touch Dubbing from HDD or Videotape to DVD
Method 1 (Videotape to DVD): Play the contents of videotape you want to dub. When it comes to the point where you want to start dubbing from, press [STOP S] or [PAUSE p]. Then, press [DUBBING VCR DVD] on the front panel. The dubbing will start from there to the end. If there is not enough space left on the disc, the prohibited icon will appear and the dubbing will not be started. Method 2 (HDD to DVD): Start the playback of the title you want to dub. Press [DUBBING] or [DUBBING HDD DVD] on the front panel. The dubbing will start from the beginning of the title to the end. Method 3 (HDD to DVD): If you press [DUBBING HDD DVD] on the front panel in stop mode without selecting any title, the unit will start dubbing the last title in the Original List or the Playlist. It will start dubbing the title in the Original List if the Original List was the last selected list. It will start dubbing the title in the Playlist if the Playlist was the last selected list. If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. If the title was in the regular stop mode, the dubbing will start from the beginning to the end of the last title. If there is not enough space left on the disc, the prohibited icon will appear and the dubbing will not be started.
With One Touch Dubbing, you can start dubbing right away with just one touch. Before: [General] Recordable DVD must be in the unit. (See pages 34 to 36.) There should be enough space on the recording DVD. Make sure to press the corresponding Device Select Button before using the device of your choice. Dubbing cannot be executed during recording of any device. [Videotape to DVD dubbing] A videotape to be dubbed must be in the unit. Limitations: [General] You cannot dub to the finalised Video mode DVDs. You cannot dub to the protected VR mode DVDs. You cannot dub to the DVD if the number of the titles or the chapters of the disc is at its limit. Dubbing cannot be executed while the Setup Menu is showing. [HDD to DVD dubbing] If a copy control signal is detected, the dubbing cannot be started. Dubbing cannot be executed during HDD or DVD recording. [Videotape to DVD dubbing] If a copy control signal is detected during dubbing, the dubbing will be stopped. Copy-once programmes which are recorded directly from the TV can be dubbed to the HDD / DVD. Copy-once programmes which are copied from the HDD / DVD to a videotape cannot be dubbed further from the videotape to the HDD / DVD. Be noted that with videotape to DVD dubbing, the unit recognise DVDs remaining time as the dubbing duration although the actual dubbing will end when the videotape ends.

Select a desired Rec Mode using [Cursor L / P], then press [ENTER].
VCR HDD Dubbing 01/01/07(Mon) 19:53

Space available

154335MB
Confirmation window will appear.
Please Select Rec Mode Fast XP Start dubbing. OK proceed? SP to LP EP Yes Space available No 154335MB SLP Auto
Press [PLAY P] to start playback of the videotape, and press [STOP S] when it reaches the point where you want to start dubbing. Press [DUBBING].
The device mode change is available only between HDD and DVD during the videotape to the HDD / DVD dubbing. After starting dubbing, the picture may be distorted because of the digital tracking function. This is not a malfunction. Be advised to play back the videotape until the picture is stabilised, then set the starting point at which you wish to start recording, and start dubbing. Playback audio is determined by the setting you make in the Selecting the Sound Mode section on page 102.
For HDD dubbing: Select VCR HDD Dubbing using [Cursor U / D], then press [ENTER]. For DVD dubbing: Select VCR DVD Dubbing using [Cursor U / D], then press [ENTER].
E3B90ED_EN.book Page 56 Friday, February 23, 2007 12:38 PM
Setting for External Connection (AV3)
Connect the external equipment using either the input jacks, AV1(TV) (Rear), AV2(DECODER) (Rear) or AV3 (Front). However, for AV3 jacks, you have to select S-VIDEO input or VIDEO input jacks depending on the connected devices. Use a commercially available Scart, S-Video or Video cable and an Audio cable for this connection.
Dubbing from the External Devices
VCR DVD+RW DVD+RW VD+RW DVD+R DVD+R When you dub a title has bilingual audio to Video mode DVD-RW / R and +VR mode DVD+RW / R, select an appropriate audio format in the Bilingual Recording Audio menu on page 40.
Select the media. Dubbing to HDD: Press [HDD] first. Dubbing to DVD: Press [DVD] first and insert a disc.
It may take awhile to load the disc.
Dubbing to a videotape: Press [VCR] and insert a videotape.
Select Select Video using [Cursor U / D], then press [ENTER].
Select the appropriate external input channel of this unit by pressing [INPUT SELECT ]. You also can use [PROG. / ].
If you are using the jacks on the front, set the channel to AV3. If you are using the jacks on the rear, set the channel to AV1 and AV2.
Select a Rec Mode by pressing [REC MODE].
Refer to Rec Mode on page 35 for HDD / DVD or page 100 for VCR.
Press [I REC] (of the dubbing device) on this unit to start dubbing. Press the PLAY button on the external device to dub from. For HDD or DVD: Press [STOP S] to stop dubbing.
Select the video input type you use, Video In or S-Video In, using [Cursor U / D], then press [ENTER].

Press [PLAY P] to resume the normal playback.
Audio (language) setting cannot be changed while using this mode. This feature may not work at some point in a disc. Audio is PCM during Rapid play mode. When you select PAL in TV System (see page 97), this function is not available with discs recorded using the NTSC system.
E3B90ED_EN.book Page 70 Friday, February 23, 2007 12:38 PM
Fast Forward / Fast Reverse Playback
DVD-V DVD+RW DVD+RW VD+RW DivX
Slow Forward / Slow Reverse Playback

DVD-RW VCD DivX

During playback, press [FWD / SLOW f] or [SLOW / REV r].
Each time you press [FWD / SLOW f] or [SLOW / REV r], the approximate speed will change as follows.

Available Speed

During playback, press [PAUSE p], then press [FWD / SLOW f] or [SLOW / REV r].
Each time you press [FWD / SLOW f] or [SLOW / REV r], the approximate speed change as follows. (The sound will remain muted.)
Speed 64x (HDD/DVD) Speed (CD) Speed (VCD) Speed (MP3) Speed (DivX) OSD indication

16x 16x 16x 16x

8x 8x 8x 8x

2x 2x 2x

Normal speed Normal speed Normal speed Normal speed Normal speed
Speed (HDD/DVD) OSD indication Speed (VCD/DivX) OSD indication

Normal speed

2 Normal speed

r5 r4 r3 r2 r1

f1 f2 f3 f4 f5
To return to normal playback, press [PLAY P].
For Audio CDs, approximate speed is fixed at 16x with sound. For Video CDs, approximate forward speeds are 2x, 8x and 16x, and approximate reverse speeds are 2x, 8x and 16x. For MP3 files, approximate speed is fixed at 8x. For DivX files, approximate forward speeds are 2x, 8x and 16x, and approximate reverse speeds are 2x, 8x and 16x. To return to play back at normal speed, press [PLAY P]. Picture quality of DivX files in fast reverse is lower than that in fast forward. For some DivX files, Fast forward/Fast reverse may not function.
For some DivX files, Slow forward may not function. Only slow forward is available when playing back Video CDs and discs with DivX files.

Time Shift Playback

You can play back a title being recorded from the beginning while recording continues. Press [HDD] first.
Fast forward or fast reverse playback across titles (for HDD/DVD) or tracks (for VCD/MP3/DivX) is impossible.

The second will be marked and Confirmation window will appear.
Select [HDD PL] Title Combine or [DVD PL] Title Combine using [Cursor U / D], then press [ENTER].
HDD Remain 72h00m(SP) Playlist P01 12:22 (1:04:40) XP OK to XP P01 11:22 (0:14:13) combine? P01 11:19 (0:00:06) SP Yes P02 09:19 (0:22:40) SP Title Name 1 Title Name 2 Title Name 3 Title Name 4 No
Two titles will be combined into a single title.
[HDD PL] Title Combine (1:37:20)
HDD Remain 72h00m(SP) Playlist P01 12:22 (1:04:40) XP P01 11:22 (0:14:13) XP P01 11:19 (0:00:06) SP Title Name 1 Title Name 2 Title Name 3 Title Name 4 Title Name 5
001/015 Creation Date 11/04/07(Wed) 10/04/07(Tue) 11/04/07(Wed) 09/04/07(Mon) 11/04/07(Wed) 11/04/07(Wed) 11/04/07(Wed) 11/04/07(Wed)

Press [SETUP].

E3B90ED_EN.book Page 87 Friday, February 23, 2007 12:38 PM
then press [ENTER] to exit.

Dividing a Title

If the number of chapter marks in the combined title exceeds 999 (99 for HDD), the combination will be rejected. If one of two titles in the Original is deleted, the combined new title will be deleted. The name of the title selected first will become the name of the combined title. The title selected first will be the first half of the combined title. If the length of the title exceeds 12 hours after combined, the combination will be rejected. You only can combine the titles in the same folder.
You can divide a title into two new titles.
Select [HDD PL] Title Divide or [DVD PL] Title Divide using [Cursor U / D], then press [ENTER].
Editing Playlist Original 01/01/07(Mon) 19:34
[HDD PL] New [HDD PL] Scene Delete [HDD PL] Title Combine [HDD PL] Title Divide [DVD PL] New [DVD PL] Scene Delete [DVD PL] Title Combine [DVD PL] Title Divide
E3B90ED_EN.book Page 88 Friday, February 23, 2007 12:38 PM
Select a desired title you want to divide, then press [ENTER].
[HDD PL] Title Divide P01 12:22 (1:04:40) XP
When it reaches the desired dividing point, press [ENTER], or press [PAUSE p] or [STOP S] and then [ENTER].
[HDD PL] Title Divide T 1 C 1 1:04:40 P01 12:22 (1:04:40) XP 01/01/07(Mon) 12:22

0:32:00

0:32:40

The title is divided.

HDD Remain 72h00m(SP) Playlist P01 12:22 (1:04:40) XP Select Title Sorting P01 11:22 (0:14:13) XP P01 11:19 (0:00:06) SP P02 09:19 (0:22:40) SP Title Name 1 Title Name 2 Title Name 3 Title Name 4

5. Still Mode (Default : Auto)
Set the still mode. (Follow steps 1 to 2 on page 94.)
Select Still Mode using [Cursor U / D], then press [ENTER].
When the password has been set already, the password will be displayed as for your * security. -If the password you have entered is wrong, the error message will appear.

Incorrect password.

Auto Field Frame
Press [ENTER] and enter the correct 4-digit password again.
The selected setting will be checked and activated. Auto: Automatically select the best resolution setting (Frame or Field) based on the data characteristics of the pictures. Field: Select Field when the pictures are still unstable even if Auto is selected. Field stabilises the pictures, although the picture quality may become coarse due to the limited amount of data. Frame: Select Frame to display relatively motionless pictures in higher resolution. Frame improves the picture quality, although it may unstabilise the pictures due to simultaneous output of two Field data.
Select a desired level using [Cursor U / D], then press [ENTER].
Rating Explanation: All Parental Controls is inactive; all discs can play. 8Virtually all DVD software of any grade (adult/general/children) can be played back. 7 to 2 - Only DVD software intended for general use and children can be played back. 1Only DVD software intended for children can be played back.
Press [SETUP] to exit. Enter the 4-digit password in the password input field using [the Number buttons] (the password will be displayed as * for your security), then press [ENTER].
Parental Lock Password Rating All Change Password
B: When you want to change the password,
An individual picture on TV screen is called as Frame, which consists of two separate images called as Field. Some pictures may be blurred at the Auto setting in still mode due to their data characteristics.
6. Parental Lock (Default: All)
You can set the Parental Lock Level to keep your children from viewing the inappropriate materials. (Follow the steps 1 to 2 on page 94.)
Change Password input field will appear.
Select Parental Lock using [Cursor U / D], then press [ENTER].
Parental lock window will appear. If you want to set a parental lock, proceed to A. If you want to change the password, proceed to B. A: When you want to set a parental lock,
Select Change Password input field using [Cursor L / P]. Enter the new 4-digit password in the password input field using [the Number buttons], then press [ENTER]. Press [SETUP] to exit.

The OSD Language Menu appears every time the power turns on. The power turns off automatically.
The unit does not function. No picture, sound or menu appears on the screen.
or error message appears if the operation is prohibited. Batteries of the remote control are weak or exhausted. Check if the connections are made securely and correctly. Check if the cables are damaged. Check if a correct external input channel is selected on your TV. (See page 25.) Check if you have completed the Channel Setting. (See pages 27 to 30.) If a recording is in progress, these operations cannot be performed. Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates. (See page 3.)

GENERAL

Clock Setting and Channel Setting cannot be performed. The unit does not operate properly.
TV channels cannot be changed.
Check if the connections are made securely and correctly. Check if the cables are damaged. Try Channel Setting by following the steps on pages 27 to 30. The channels may be set to be skipped. (See page 28.) This unit does not skip the external input channels. This is not a malfunction.

CHANNEL

Only specific channels do not appear. The external input channels (such as AV1, AV2 or AV3) cannot be skipped.

Symptom GENERAL

The image from the external device cannot be displayed or recorded.
Try pressing [INPUT SELECT ] repeatedly. Turn on all connected devices. Check if the connections are made securely and correctly. This unit cannot record programmes that contain copy protection signal. This is not a malfunction. The space of the recording media may be used up. Try deleting unnecessary titles from the Original, or exchange it with the recordable media. The maximum number of titles or chapters has exceeded. Delete the unnecessary titles to make enough space or insert a new recordable media. Check if the connections are made securely and correctly. The internal clock of the unit may have been stopped due to a power failure that lasted for more than 30 seconds. Reset the clock. (See pages 30 to 31.) Copy-once programmes can only be recorded on a CPRM compatible VR mode DVD-RW. Check if the disc is protected or finalised. Undo the protection or the finalisation. DVD-RW once formatted with other DVD recorders cannot be recorded on this unit. This is not a malfunction. Video mode DVDs recorded by other DVD recorders cannot be used on this unit unless finalised. Check if the connections are made securely and correctly. Check if a videotape is inserted. Check if a videotape has a record tab intact.

Recording is impossible.

RECORDING
Timer Recording cannot be performed.
E3B90ED_EN.book Page 106 Friday, February 23, 2007 12:38 PM
TV aspect ratio does not match your TV screen. Playback picture is distorted. Colour of the picture is abnormal.
Check the TV Aspect Ratio. (See pages 32 to 33.) A different aspect ratio will be used when the aspect ratio specified by the disc is not supported by this unit. During fast forward or fast reverse, playback picture may be distorted. This is not a malfunction. Connect to TV directly. When you connect this unit with the television via VCR or other devices, the picture may be distorted due to the copyprotection signal. Check if the cables are damaged. Keep the equipment which may cause electrical disturbances, such as a cellular phone, away. Turn on all connected devices. Check if the external input channel is set correctly. Check if the connections are made securely and correctly. Resume function may be activated. See page 69 to cancel the resume point. Check if the playable disc is inserted. Check if the disc is loaded correctly with the labelled side facing up. Discs made on other devices or on personal computers cannot be played back on this unit unless it is finalised on the device. Even if it is finalised, the performance of those discs are not guaranteed on this unit. The disc may be dirty or flawed. Clean the disc. Check if all the connections are made correctly. Check the Parental Lock Setting. (See page 96.) Check if the Digital Audio Setting is set correctly. (See pages 93 to 94.) There is a possibility that the selected subtitle language is not supported by the disc. If the audio source is in the Dolby Digital format, set the Dolby Digital Setting to PCM in the Setup Menu. (See page 93.) Multilingual subtitles are not supported by the disc. Some audio languages or the subtitle languages can be changed only from the Disc Menu. Please refer to the discs manual. Even though the multi-angle feature is supported by the disc, that does not mean all the scenes are shot from multi-angles. Changing angles are available only for those scenes shot from the multiangle. Some DVD players do not play back the disc made on other recorder. Refer to the manual of the unit. Adjust the tracking by pressing [PROG. videotape.
GENERAL HDD/DVD PLAYBACK DVD
There is no sound, or no subtitle.
Playback does not start from the beginning.
Playback cannot be performed.
Digital Audio Setting cannot be changed to main audio (L), sub audio (R) or combination of both. Audio Language or the Subtitle Language of the DVD cannot be changed. Camera angles cannot be changed.
The disc cannot be played back on other player even though it is finalised properly. VCR picture is noisy.

COV_E3B90ED_EN.fm Page 1 Friday, February 9, 2007 11:06 AM
TOSHIBA HDD & DVD / Video Cassette Recorder RD-XV47KE

Introduction Connections

HDD & DVD / Video Cassette Recorder

RD-XV47KE

OWNERS MANUAL
Basic Setup Recording Playback

OPERATIONS GUIDE

Editing Function Setup

VCR REC

PROGRAM DUBBING VCR

HDD/DVD

DVD REC

VCR Functions

ON / STANDBY

Others

Printed in China

1VMN23421 / E3B90ED

2007 Toshiba Corporation