Satellite - A205-S5804 Satellite - A205-S5805 Satellite - A205-S5806 Satellite - A205-S5809 Satellite - A205-S5810 Satellite - A205-S5811 Satellite - A205-S5812 Satellite - A205-S5813 Satellite - A205-S5814 Satellite - A205-S5816 Satellite - A205-S5819 Satellite - A205-S5821 Satellite - A205-S5823 Satellite - A205-S6808 Satellite - A205-S6810 Satellite - A205-S6812 Satellite - A205-S7442 Satellite - A205-S7443 Satellite - A205-S7456 Satellite - A205-S7458 Satellite - A205-S7464 Satellite - A205-S7468 Satellite - A210-04F Satellite - A210-11B Satellite - A210-11P Satellite - A210-128 Satellite - A210-129 Satellite - A210-198 Satellite - A210-19T Satellite - A210-1C0 Satellite - A210-JA0 Satellite - A210-JA3 Satellite - A210-MJ6 Satellite - A210-MS6 Satellite - A210-ST0 Satellite - A215-S4747 Satellite - A215-S4757 Satellite - A215-S4767 Satellite - A215-S4807 Satellite - A215-S4817 Satellite - A215-S5802 Satellite - A215-S5807 Satellite - A215-S5808 Satellite - A215-S5815 Satellite - A215-S5817 Satellite - A215-S5818 Satellite - A215-S5822 Satellite - A215-S5824
Satellite - A215-S5825 Satellite - A215-S6804 Satellite - A215-S6814 Satellite - A215-S6816 Satellite - A215-S6820 Satellite - A215-S7407 Satellite - A215-S7411 Satellite - A215-S7413 Satellite - A215-S7416 Satellite - A215-S7417 Satellite - A215-S7422 Satellite - A215-S7425 Satellite - A215-S7427 Satellite - A215-S7428 Satellite - A215-S7433 Satellite - A215-S7437 Satellite - A215-S7444 Satellite - A215-S7462 Satellite - A215-S7472 Satellite - A60-127 Satellite - A80-S178TD Satellite - L100-103 Satellite - L100-104 Satellite - L100-105 Satellite - L100-111 Satellite - L100-121 Satellite - L100-140 Satellite - L100-141 Satellite - L100-165 Satellite - L100-170 Satellite - L100-171 Satellite - L100-173 Satellite - L100-175 Satellite - L100-179 Satellite - L100-194 Satellite - L10-107 Satellite - L10-114 Satellite - L10-132 Satellite - L10-151 Satellite - L10-190 Satellite - L10-282 Satellite - L10Q Satellite - L15-S104 Satellite - L20-101 Satellite - L20-112 Satellite - L20-118 Satellite - L20-120 Satellite - L20-121

Satellite Pro - U200-132 Satellite Pro - U200-155 Satellite Pro - U200-182 Satellite Pro - U300-116 Satellite Pro - U300-11K Satellite Pro - U300-13P Satellite Pro - U300-142 Satellite Pro - U300-143 Satellite Pro - U300-14D Satellite Pro - U300-14R Satellite Pro - U300-14S Satellite Pro - U300-15B Satellite Pro - U300-15C Satellite Pro - U300-15D Satellite Pro - U300-RW1 Satellite Pro - U300-RW7 Satellte - A215-S4697 Tecra - A6-141 Tecra - A7-110 Tecra - A7-112 Tecra - A7-114 Tecra - A7-202 Tecra - A7-209 Tecra - A7-221 Tecra - A7-232 Tecra - A7-248 Tecra - A8-10D Tecra - A8-10G Tecra - A8-10H Tecra - A8-117 Tecra - A8-127 Tecra - A8-129 Tecra - A8-130 Tecra - A8-132 Tecra - A8-143 Tecra - A8-150 Tecra - A8-159 Tecra - A8-183 Tecra - A8-185 Tecra - A8-210 Tecra - A9-12P Tecra - A9-12S Tecra - A9-12T Tecra - A9-132 Tecra - A9-146 Tecra - A9-14F Tecra - A9-14G Tecra - A9-51E
Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba
Tecra - A9-51F Tecra - A9-51G Tecra - L2-S011 Tecra - L2-S022 Tecra - M5-103 Tecra - M5-104 Tecra - M5-118 Tecra - M5-119 Tecra - M5-133 Tecra - M5-292 Tecra - M5-383 Tecra - M5-384 Tecra - M5-415 Tecra - M5-417 Tecra - M7-117 Tecra - M7-121 Tecra - M7-132 Tecra - M7-133 Tecra - M7-141 Tecra - M8-RW8 Tecra - M8-S8011 Tecra - M8-S8011X Tecra - M8-ST3093 Tecra - M8-ST3094 Tecra - M9-12K Tecra - M9-12R Tecra - S5-10X Tecra - S5-13D Tecra - S5-13N

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite

3000 Series

GENERAL INFORMATION

Tools Required for Proper Disassembly and Reassembly: 1. Phillips screwdriver (Size 0) 2. Phillips Screwdriver (Size 1) 3. Flat head screwdriver (5mm) 4. Hex driver (5mm) 5. Security Torx(Size8) 6. Case Separator 7. ESD Wrist Strap 8. ESD mats 9. Tweezers
Before attempting any of the following procedures, make sure that the main battery and AC adaptor is not connected to the unit and the environment in which you are working on is protected from Electro-Static Discharge(ESD).
Tough Enough for Todays World

TOSHIBA

Satellite 3000 Series

TABLE OF CONTENTS:

1. BATTERY PACK REMOVAL 2. OPTIONAL PC CARD REMOVAL 3. MODULAR BAY REMOVAL 4. DVD-ROM/CDR-W DRIVE REMOVAL 5. HDD REMOVAL 6. MEMORY MODULE REMOVAL 7. KEYBOARD REMOVAL 8. CONTROL BOARD REMOVAL 9. COOLING MODULE REMOVAL 10. CPU REMOVAL 11. TOP COVER REMOVAL 12. VIDEO BOARD REMOVAL 13. MODEM BOARD REMOVAL 14. WIRELESS LAN CARD REMOVAL 15. SYSTEM BOARD REMOVAL 16. DISPLAY MASK REMOVAL 17. FL INVERTER AND LCD REMOVAL
BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL

Battery release lever

Battery pack 1. Turn the computer upside down as shown. 2. Slide the battery release lever in the direction of the arrow. 3. Slide the battery pack forward and lift it out.

Eject button

PC card
1. Push the eject button to pop it out. 2. Press the eject button and remove the PC card. NOTE: Before removing any PCMCIA device, make sure it is STOPPED in the PC Card Manager.

MODULAR BAY REMOVAL

DVD-ROM/CDR-W DRIVE REMOVAL
DVD-ROM/CDR-W connector DVD-ROM/CDR-W

Release lever

DVD-ROM/CDR-W bracket Select baydevice 1. Turn the computer upside down. 2. Slide the release lever in the direction of the arrow. 3. Pull out the modular bay device in the direction of the arrow. M2.5x4 black screws 1. Remove four M2.5x4 black screws securing the DVD-ROM/CDR-W to the bracket. 2. Slide the DVD-ROM/CDR-W out of the bracket. 3. Disconnect the DVD-ROM/CDR-W connector from the drive.

HDD REMOVAL HDD REMOVAL

M3x4 silver screws HDD bracket
Insulator HDD connector M2.5x3 black screws 1. Turn the computer upside down. 2. Remove two M2.5x3 black screws securing HDD assembly. 3. Slide the HDD assembly in the direction of the arrow to disconnect from the system board. 4. Lift the HDD assembly out of the HDD bay. MEMORY MODULE REMOVAL Memory clips HDD assy
5. Remove two M3x4 silver screws securing the HDD bracket to the drive and lift off the bracket. 6. Peel off the HDD insulator.

Memory cover

M2x3 Black screws 1. Turn the computer upside down. 2. Remove two M2x3 black screws and remove the memory cover.
Memory module 3. Spread the memory clips securing the memory module and pull the memory module out of the connector on a 45 degree angle.

KEYBOARD REMOVAL

Wireless switch Control board cable Display panel

Keyboard holder

Board switch
Case separator 1. Open the display panel. 2. Using the case separator, unlatch the keyboard holder at the top of the keyboard.
Keyboard holder M2.5x3 silver screws 3. Disconnect the control switch/LED board cable from the keyboard holder. 4. Remove four M2.5x3 silver screws securing the keyboard clip. Note: When reinstalling the keyboard holder, make sure that the wireless switch is latch properly to the control switch board switch.

CONTROL BOARD REMOVAL

Control switch board

Keyboard

IPS switch cable

Keyboard cable

M2.5x3 black screws 1. Remove four M2.5x3 black screws securing the control switch board. 2. Disconnect the control switch/LED board from JP4 on the main PCB.
4. Lift out the keyboard and set it as shown above. 5 Disconnect the keyboard cable from JP5 and IPS switch cable from JP4 on the video board and lift out the keyboard.

COOLING MODULE REMOVAL

M2.5x3 black screws

Heatsink

Heatsink cover
Silver screws 1. Remove four M2.5x3 brass screws securing the heatsink cover. 2. Remove four silver screws securing the heatsink. 3. Lift out the heatsink.

CPU REMOVAL

TOP COVER REMOVAL

Open CPU lock Lock

Cable cover M2.5x3 black screw Flat head screwdriver 1. Using a 5mm flat head screw driver, insert the screwdriver 1. Remove one M2.5x3 flat head screw securing the into the CPU lock slot and turn it counterclockwise. cable cover. 2. Lift out the CPU. NOTE: In order to properly lock the CPU, a 5mm flat head screw driver must be used.

LCD/FL cable M2.5x15 silver flat head screw

Grey coax cable

Black coax cable IPS switch cable 2. Turn the computer right side up and open the display panel. 3. Disconnect the following four cables: - Black and Gray coax cables - IPS switch cable from PJ1 4. Remove one M2.5x15 silver flat head screws securing the LCD/FL cable and disconnect the LCD/FL cable.
M2.5x6 black screws 5. Remove six M2.5x6 black screws (four at the back and two at the bottom cover) securing the display assembly. 6. Lift out the display assembly.
M2.5x3 black screw M2.5x6 black screw
M2.5x18 black screws M2.5x5 silver screws
M2.5x14 black screw 7 Remove the following thirteen screws from the bottom cover: - M2.5x6 black screw - M2.5x18 black screws

M2.5x14 torx screw

8. Remove the following 9 screws from the top cover: - Six M2.5x3 black screws - One M2.5x14 black screw - One M2.5x14 Torx screw(Size 8) - One M2.5x5 silver screws 9. Unlatch the top cover from the bottom cover.

VIDEO BOARD REMOVAL

JP8 Video board

MODEM BOARD REMOVAL

System board

RJ11 cable

Modem board
1. Disconnect the video board from JP8 and JP11 on the system board.
1. Disconnect the modem board from JP13 on the system board. 2. Disconnect the RJ11 cable from the modem board.
WIRELESS LAN CARD REMOVAL

Mini PCI Clips

Wireless LAN card 1. Push the Mini PCI slot clips outward and pull the Wireless LAN card out of the connector on a 30 degree angle.

SYSTEM BOARD REMOVAL

Hex screws Stud screws
System board Metal shield M2.5x4 brass screws 1. Remove the following eleven screws securing the system board: - 2 M2.5x4 brass screws securing the metal shield - 5 M2.5x4 brass screws securing the HDD shield - 1 M2.5x4 brass screw on the system board - 4 stud screws from the CPU socket
2. Remove four hex screws at the back of the computer securing the system board. 3. Lift out the system board.

14 DISPLAY MASK REMOVAL

FL INVERTER AND 14 LCD REMOVAL

LCD module

Display mask LCD

Mask seals

1. Remove two rubber seals at the top corners of the display assembly and two mask seals at the bottom corners of the display assembly. 2. Remove four M2.5x5 silver screws securing the display mask. 3. There are 21 latches securing the display mask. Carefully insert your fingers between the display mask and the LCD module and pry open the latches starting from the bottom six latches, to the five latches on the right and left sides, ending with the top six latches.

Tape LCD/ FL cable M2x4 brass screws FL cable FL inverter board 1. Peel off the tape securing the FL cable. 2. Remove two M2.5x5 silver screw securing FL inverter board. 3. Carefully lift up the FL inverter board and disconnect the LCD/FL cable from CN1 and the FL cable from CN2. 4. Remove two 2.5x6 black screws securing the LCD top cover.

M2x3 silver screws

LCD/FL cable
5. Lay the top cover as shown above. 6. Peel off two capton tapes securing the LCD/FL cable and disconnect the cable. 7. Remove four M2x3 silver screws securing the LCD module to the LCD brackets and lift out the module. NOTE: When you open and close the display assembly with the top cover off, hold it by the hinges to prevent the brackets from bending.