Reviews & Opinions
Independent and trusted. Read before buy Toshiba SD-260E!

Toshiba SD-260E

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Toshiba SD-260E Portable Dvd Player, size: 1.1 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Toshiba SD-260EAbout Toshiba SD-260E
Here you can find all about Toshiba SD-260E like manual and other informations. For example: review.

Toshiba SD-260E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Toshiba SD-260E please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Toshiba SD-260E photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 10. Page 1 of 1. Average Rating:
bocanegra 5:21pm on Friday, October 29th, 2010 
Great Upconverting DVD player - Plays DVDs better than my $250 blu-ray player To those people who have had the "pixelization" problem: go get a DVD pl... Should have just bought a Blu-ray What a mistake. I bought this thing because of the so-called "Blu-ray" like quality. Nope. A week after I had it,... no disk... hard to load Everything works well on this on this player once it recognizes the DVD.
virginfisters 2:44am on Monday, October 4th, 2010 
Cheap, easy to hook up Crapped out in less than 6 months. Dancing green and red squares all over the screen. One Toshiba failure is acceptable but two in a row after a short life is not. I am not a happy camper. Cruddy performance from the very beginning. While failures with hi-tech components occur, a quick scan of the reviews and on Google reveals that this unit has an extremely high failure rate.
joseprad 10:36am on Monday, August 30th, 2010 
What a difference the Toshiba XDE500 makes when an older DVD movie is viewed on my 42" 1080p display!
makaio 7:49pm on Tuesday, August 17th, 2010 
"The Toshiba DVD player was great at first, but a week later it stopped working. The picture went all green and scattered. I tested the cables. "I purchased this unit as my last standard DVD player. "Hello, I hope this finds you well.
ecuapac 8:30pm on Thursday, July 29th, 2010 
works good until busted XDR 500 worked great for 1.5 years and then went south. Displalyed only random pixels.
PJJMARCO 12:56am on Sunday, July 25th, 2010 
HDTV, XDE Nothing i guess ThinI was skeptical about the Toshiba XDE enhancement features and their promise to provide a better looking image for standard DVDs. After all. I compared this player to my Oppo 980 (which costs about twice as much), connecting both to a Sony LCD HDTV.
kenny10 2:34am on Sunday, June 20th, 2010 
I bought this same DVD player as is seemed like a great deal. It worked for a couple on months then refused to read any DVD.
jrwhitley 7:40am on Thursday, June 17th, 2010 
This player does an excellent job of upconverting content and the edge enhancement is certainly better than you will find in any other player in this ...
antoni123 11:27am on Saturday, May 8th, 2010 
"I bought this for upconversion capability and to play both region 1 and 9 DVDs. I think $99 was a good price to achieve both objectives.
antiterrorist2 8:26am on Wednesday, March 31st, 2010 
Well i bought the XDE player and all i can say is WOW.......this thing really does work........most of the time.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Model Name: SD-260ESE This model has the following features: - DVD/CD-DA/CD-R/CD-RW Playback - VCD (Video CD)/ SVCD Playback - MP3 Playback - JPEG/MPEG Playback - DivX /MPEG4 Playback - 2 Channel analog audio output - Coaxial Digital Audio output - Component Video Output
Manufactured under license from Dolby Laboratories. Dolby and the double-D sym bol are trademarks of Dolby Laboratories. Confidenti al unpublished works. Copyright 1992-1997 Dolby Laboratories, Inc. All rights reserved. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protect ion technol ogy must be aut horized by Macrovision Corporation, and is intended for home and other limited viewing uses only u nl es s ot he r wi se a u th ori z e d b y M a cr o vi s i on C or po rat i on. Re v ers e e n g i n e e r i n g o r d i s a s s e m b l y i s p r o h i b i t e d. DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

TABLE OF CONTENTS

TABLE OF CONTENTS... 2 ABOUT THIS MANUAL... 3 SAFETY INFORMATION.. 3 WARNING... 4 SAFETY PRECAUTIONS I... 4 SAFETY PRECAUTIONS II.. 6 NOTES ON CD-R AND CD-RW DISCS.. 6 NOTES ON DISCS.... 7 SUPPLIED ACCESSORIES... 8 DISC TYPES COMPATIBLE WITH THIS UNIT.. 9 GENERAL PROPERTIES... 10 FRONT PANEL FUNCTIONS... 11 FRONT PANEL DISPLAY... 12 REAR PANEL CONNECTIONS... 13 CONNECTION OF YOUR DVD PLAYER WITH TV. 14 COMPONENT VIDEO (YPBPR) / PROGRESSIVE SCAN & CONNECTION.. 15 CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER. 16 FITTING BATTERIES IN YOUR REMOTE CONTROL.. 18 REMOTE CONTROL FUNCTIONS.. 18 DVD PLAYBACK.... 20 DIRECT SELECTION OF SCENES.. 21 REPEAT PLAY... 21 CONVENIENT FUNCTIONS... 22 VIDEO CD PLAYBACK.. 23 DIRECT SELECTION OF SCENES.. 24 REPEAT PLAY... 24 CONVENIENT FUNCTIONS... 25 AUDIO CD PLAYBACK.. 25 DIRECT SELECTION OF TRACKS.. 26 REPEAT PLAY... 26 CONVENIENT FUNCTIONS... 26 SMART NAVI... 27 USING SETUP MENU... 28 MENU ITEMS... 29 TROUBLESHOOTING... 31 SPECIFICATIONS... 32 DEFINITION OF TERMS... 33

ABOUT THIS MANUAL

Instructions in this manual describe the controls on the player. You can also use the controls on the remote if they have the same function as those on the DVD player. Dear Customers We would like to thank you for purchasing this DVD player. W e strongly recommend you to study the operating instructions carefully before attempting to operate the unit and note the listed safety precautions.

SAFETY INFORMATION

CAUTION
DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed. W hile this player is plugged to the wall outlet, do not place your eyes close to the opening of the disc tray or any other openings in the case of the product. For your own safety, do not attempt to look inside this product.
Use of controls for adjustments and performance of procedures other than those specified may result in hazardous radiation exposure. Do not open covers and do not attempt to repair any damaged parts. Refer product to a service technician or qualified professional for any necessary repair.
The mains plug or the appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING

To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. To reduce the risk of fire or electric shock, and any interference, use the recommended accessories only.

SAFETY PRECAUTIONS I

Power Source The unit should be operated only from a 220-240V~ 50 Hz outlet. Please do not open the cover by yourself. There is high voltage in the set which will endanger your life. Please contact local service agent for help and advice. Repairs should be carried out by a qualified technician only. Power Cord Do not place the unit, a piece of furniture, or any object on the power cord (mains lead). Do not cut or pinch the power cord. Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be routed in such a way that they are not likely to be stepped on. A damaged power cord can cause fire or give you an electrical shock. Check the power cord once in a while. If damaged, ask the closest service agent for help. When the AC power cord needs to be changed, it should be done at a qualified service shop only.

Video Output

Left - Right Output
Audio / Video Cable (commercially available)

- 14 -

COMPONENT VIDEO (YPBPR) / PROGRESSIVE SCAN & CONNECTION
Component Video (YPBPR) output jacks can be used to have the best picture quality. Your TV set must have component video (YPBPR) input connectors for this type of connection. These jacks are used for only video connection. For audio, red & white output jacks must be used. If you have a high-definition or digital ready TV, you may take advantage of the DVD Players progressive scan output for the highest video resolution possible. Select the Progressive Scan mode by choosing PROGRESSIVE on the VIDEO OUTPUT menu, see page 29. If your TV does not accept the Progressive Scan format, the picture will appear scrambled when you try Progressive Scan on the DVD Player. 1. Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding IN jacks on the TV using the YPBPR cable. 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio Left and Right IN jacks on the TV using the audio cables.
Audio (Left / Right) Cable (commercially available)
Component Video Cable (commercially available)

L E FT

R IG H T

AUDIO INPUT

COMPONENT VIDEO INPUT

NOTE:

W hen using the component video cables (YPBPR ), do not connect the Scart socket.

- 15 -

CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER
Analog Audio Output Sockets: To get better sound quality, the unit can be connected to an amplifier via analog audio left/right outputs.
Video Cable (commercially available)

- 16 -

Digital Audio Output Socket: For the best sound, the unit can be connected from the coaxial digital audio output to an AV amplifier with a built-in Dolby Digital or DTS decoder. By using 6 speakers, user can enjoy the 5.1 channel surround sound.
When this unit is connected to a separate Decoder Box or Amplifier through the DIGITAL AUDIO OUT connector, you may sometimes hear a short noise when selecting the sound system in the DVD Menu. This is not a malfunction.
RCA type AV cable to RCA Video on TV
DVD Player Coaxial audio cable to coaxial digital audio input connector

Amplifier

FRONT SPEAKER (LEFT) CENTRE SPEAKER

FRONT SPEAKER (RIGHT)

SUBWOOFER

REAR SPEAKER (LEFT)

REAR SPEAKER (RIGHT)

- 17 -

FITTING BATTERIES IN YOUR REMOTE CONTROL
First open the battery cover on the underside of the remote control. Fit both batteries 1.5Volt (R03/AAA) referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. W hile using the remote control, direct it towards the front of the DVD player. If the remote control does not work or the chosen function could not be made, the batteries are most probably exhausted and they should be replaced as soon as possible. Please use only leak proof batteries. If you will not be using your remote control for a long time, it is recommended to take out the batteries from your remote control.

REMOTE CONTROL FUNCTIONS

- 18 -
1. TIME button Changes the playing time display mode of the disc, title, track etc., on the OSD and front panel display. 2. OPEN/CLOSE ( ) button Opens or closes the disc tray. 3. Number buttons Press to enter track/chapter/title/time numbers directly. 4. SEARCH MODE button Press to select the unit for search (title, chapter, track, time) 5.TOP MENU button Displays the title menu on the TV screen. 6. MENU button Displays the DVD root menu on screen. 7. SLOW FORWARD ( ) button
17. SUBTITLE button Changes the language of the subtitle while playing a DVD. 18. ANGLE button Changes the angle when playing a DVD disc recorded with multiple angles. 19. A - B RPT button Repeat playback between point A and point B. 20. +10 button For the track/chapter numbers which are greater than 9, use +10 button. Press this button once and then enter the two digit track/chapter number. 21. PLAY MODE button Press to execute disc/title/chapter repeat. 22. RETURN button Returns to the preceding selection screen. 23. PROGRAM button It is used to switch the Program Mode in stop mode of MP3, Audio and JPEG CDs. 24. ZOOM button Zooms the picture. 25. SKIP/STEP : button Press to go to the next chapter or track during playback and next frame during pause. 26. CLEAR button Using this button, you can delete the mistyped entries or cancel some functions.
Use this button for forward slow playback. 7.1. SLOW BACKWARD ( ) button
Use this button for DVD backward slow playback. 8. PLAY/PAUSE button Plays/pauses the disc. For any DVD title that has a root menu with still picture, this button functions as button ENTER in the root menu. Otherwise this functioning of Play/Pause button on the root menu will be prohibited by will appear. the disc, and 9. REV-FWD buttons Pres s to adjus t the forward and reverse playbac k at different speeds during playback (fast forward/reverse). 10. SKIP 9 button Press to start playback from the previous chapter or track. 11. STOP button Stops playing disc. 12. SETUP/DISP button Displays the current playing status or set-up menu on the TV screen. 13. Arrow buttons Move to the items or settings. 14. ENTER button Executes the items or settings. 15. ON/STANDBY button Turns the unit on or switches the unit to standby mode. 16. AUDIO button Changes the language of the sound while playing a DVD/ VCD.

- 19 -

For your reference:

DVD PLAYBACK

Preparations Turn on your audio system if the player is connected to an audio system. Basic Play
appears while a button is being pressed, it W hen means that the corresponding operation is prohibited by the player. Stopping Play To stop the play permanently, press STOP (< ) twice. W hen the STOP (<) button is pressed once, a message PRESS PLAY TO CONTINUE will appear on the screen to remind you if you want to continue the play. To stop the play, press the STOP (<) button again or you can press PLAY/ PAUSE to continue playback.

You can view the DVD starting from any time point you want. Press SEARCH on the remote c ontrol twice during playback. The time search box is displayed on the screen. You can see the total elapsed play time of the title as --:--:--/xx:xx:xx Enter the time using number buttons. The title is played beginning from the desired time just after you enter the time, if not prohibited by the DVD. You can clear the fields by pressing the CLEAR button if you enter wrong numbers. You can press RETURN button to cancel time search.
If you attempt to enter a number greater than the total time of the current title, it will cancel the operation. If you wait for ten seconds without pressing any button for entering time, the operation is cancelled.
If you attempt to enter a number greater than the total number of chapters on the current title, the search box symbol appears on up-left corner of disappears and screen. If you wait for ten seconds without pressing any button for selecting scenes by chapter number, the operation is cancelled.

REPEAT PLAY

Repeat Viewing
Selecting Scenes by Title Number Press PLAY MODE during playback. Pres s SEARCH on the remote c ontrol once during playback. The chapter/title search box is displayed on the screen. Press 3 button on the remote control to select the title field in the search box to change the title. You can see the currently playing title and total number of titles as -/xx. Enter the number of the title using number buttons. The selected title is played just after you enter all the title number digits. You can clear the field by pressing the CLEAR button if you enter wrong number. You can press RETURN button to cancel title search. Each time this button is pressed, a different repeat box is displayed on the screen. If CHAPTER REPEAT ON is displayed, the current chapter will be played again. If TITLE REPEAT ON is displayed, the current title will be played again. If REPEAT OFF is displayed, the repeat mode is disabled.
Repeat play may be prohibited by some DVD titles.
Repeating a section between two specific points (A B repeat)
If you attempt to enter a number greater than the total number of titles, the search box disappears and symbol appears on up-left corner of screen. If you wait for ten seconds without pressing any button for selecting sc enes by title number, the operation is cancelled. Press A-B RPT during playback at the point where repeat play is to commence (A). A TO B SET A is displayed. Press A-B RPT again at the point where repeat play is to be concluded (B). A TO B SET B is displayed and the repeat play of the selection between points A and B starts, if not prohibited by the DVD. To return to normal play: Press A-B RPT again. A TO B CANCELLED is displayed and the A-B Repeat is disabled.

- 21 -

Displaying / Changing Subtitle Language

Displaying a scene with a larger and closer view ZOOM function enables you to take a closer look at the scene you are viewing. This is especially useful when you are watching a science fiction or an adventure film.

NOTE: Press ZOOM

button consecutively will change the zoom ratios. You can move to any area of the enlarged screen by using the 3/46/5 buttons. To return to normal play: Press ZOOM several times until ZOOM OFF is displayed on the screen and the picture is now in its normal size.

- 22 -

The number of recorded angles differs depending on the disc used. x is displayed on the screen during playback. This indicates that the multi-angle scene has just started. Also on units display (VFD) ANGLE message appears. You will see in the upper-right corner of the screen the number of the angle selection you have choosen. In SETUP menu, an ANGLE MARK option exists, which, if enabled, will display a continuous angle mark on the screen as long as multi-angle scene is available. Press ANGLE during playback. The current angle is changed. Press ANGLE several times until the preferred viewing angle is selected.

VIDEO CD PLAYBACK

Preparations Turn on your audio system if the player is connected to an audio system.
Basic Play 1. Press ON/STANDBY button. 2. Press OPEN/CLOSE ( ) to open the disc tray. 3. Place a disc onto the tray Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position. 4. Press OPEN/CLOSE ( ). The disc tray is closed. For Video CDs without playback control: Play commences immediately. For Video CDs provided with playback control: If disc contains a menu, it will appear on the screen after a few moments.
This function will only work on discs where different angles have been recorded. The viewing angles are shown on the screen. You can select one of them for viewing. If you press ANGLE outside of a multi-angle scene on a is displayed. It means that only one multi-angle title, angle is currently available.
Using a DVD M enu Some DVD discs have unique menu structures called DVD menus. For example, DVDs programmed with complex content provide guide menus, and those recorded with various languages provide menus for audio and subtitle language. Although the DVD menus content and operation dif fer from disc to disc, the following explains basic operation when this feature is used. Press TOP MENU or MENU during playback. The DVD menu available on the disc is now displayed. M enu Play This function works only with video CDs with Playback Control (version 2.0). The details differ depending on the disc concerned. Also refer to the instructions accompanying the disc. After steps 1 to 4 above, the menus are displayed on the TV screen 5. Press the number button(s) to select the preferred item. The player now starts to play the selected item.

If you press MENU, the root menu of DVD is displayed. If you press TOP MENU, the menu of the current title is displayed. Press 3/4/6/5 to select the preferred item. Press ENTER. The selected item is now executed. You can play any chapter you want, just by pressing the corresponding number button. For the chapter numbers which are greater than 9, use +10 button. Press this button once and then enter the two digit chapter number. If you attempt to enter a number greater than the total symbol is displayed on number of tracks on disc, screen.
Use +10 button to enter two-digit-numbers. 3/4/6/5 arrow buttons are not used for selecting items for video CDs. What is Playback Control (PBC)? If a video CD has playback control written on the jacket of disc, it means that particular scenes or information can be selected for viewing interactively with TV screen using the menu screen.
W henever you insert a disc, PBC is always on.
Some DVDs may not contain root and/or title menus.

- 23 -

After operation When the unit is not in use, remove the disc and press ON/ STANDBY to turn the unit to standby mode.
Reverse stepping is not available. Slow M otion Play Forward Press SLOW Press SLOW during playback. The slow motion starts. to increase the speed.
The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. W hen no further selections are to be played, be sure to press the STOP (<) button to clear the menu display. If the disc is placed upside down ( and it is a single sided disc), TV screen will display either NO DISC or DISC ERROR. For your reference: symbol appears while a button is pressed on upWhen left corner of OSD (On - Screen - Display), it means that the player or the disc prohibits the corresponding operation. Stopping Play To stop the play permanently, press STOP (<) twice. W hen the STOP (<) button is pressed once, a message PRESS PLAY TO CONTINUE will appear on the screen to remind you if you want to continue the play. To stop the play, press the STOP (<) button again or you can press PLAY/ PAUSE to continue playback.
The speed of slow motion play is displayed on the screen each time you change it. To return normal play: Press PLAY/PAUSE again.
Reverse slow motion play is not available.

If the disc is placed upside down ( and it is a single sided disc), TV screen will display either NO DISC or DISC ERROR. For your reference: appears while a button is being pressed, it W hen means that the corresponding operation is prohibited by the player.
Stopping Play To stop the play permanently, press STOP (<) twice. W hen the STOP (<) button is pressed once, a message PRESS PLAY TO CONTINUE will appear on the screen to remind you if you want to continue the play. To stop the play, press the STOP (<) button again or you can press PLAY/ PAUSE to continue playback.
Displaying a scene with a larger and closer view ZOOM function enables you to take a closer look at the scene you are viewing. This is especially useful when you are watching a science fiction or an adventure film. Press ZOOM during playback. You can change the zooming ratio by pressing ZOOM button several times.
Fast Forward / Reverse Press FWD 8 or REV 7 during playback. The speed of advanc e or revers e changes for every press of the FWD or REV button. Normal play is resumed when PLAY/PAUSE button is pressed.
You can move to any area of the enlarged screen by using the 3/4/6/5 arrow buttons. To return to normal play: Press ZOOM several times until ZOOM OFF is displayed on the screen.
No sound will be heard during rapid advance or rapid reverse. Skip Forward / Backward Press SKIP/STEP: or SKIP 9 during playback.

- 25 -

A track is skipped forward or backward each time the button is pressed.
Pause Press PLAY/PAUSE during playback. The play freezes. To return to normal play: Press PLAY/PAUSE again.
Press A-B RPT during playback at the point where repeat play is to commence (A). A TO B SET A is displayed. Press A-B RPT again at the point where repeat play is to be concluded (B). A TO B SET B is displayed and the repeat play of the selection between points A and B starts. To return to normal play: Press A-B RPT again. A TO B CANCELLED is displayed and the A-B Repeat is disabled.
DIRECT SELECTION OF TRACKS
Selecting by Time You can play the audio CD starting from any time point you want. Press SEARCH on the remote control during playback. The time search box is displayed on the screen as GO TO: _ _ : _ _ / xx : xx Enter the time using number buttons.

If you give up entering the point B after entering point A, simply press RETURN and the operation is cancelled.
Displaying the time information Press TIME during playback. Each time this button is pressed, an information box is displayed on TV screen to indicate the status of the time displayed on the VFD display. If SINGLE ELAPSED is displayed, the VFD display on the unit shows the elapsed time for the track that is being played. If SINGLE REMAIN is displayed, the VFD display on the unit shows the remaining time for the track which is being played. If TOTAL ELAPSED is displayed, the VFD display on the unit shows the elapsed time for the disc which is being played. If TOTAL REMAIN is displayed, the VFD display on the unit shows the remaining time for the disc which is being played. Program Function
Press RETURN to cancel the operation. If you wait for ten seconds without pressing any button for selecting tracks, the operation is cancelled.
Accessing tracks using number buttons You can play any track you want, just by pressing the corresponding number button. For the track numbers which are greater than 9, use +10 button. Press this button once and then enter the two digit track number. If you attempt to enter a number greater than the total symbol is displayed on number of tracks on disc, screen.
Press PLAY MODE during playback. Each time this button is pressed, a different repeat box is displayed on the screen. If REP-ONE is displayed, the current track will be played again. If REP-ALL is displayed, all tracks on disc will be played again. If REPEAT OFF is displayed, the repeat mode is disabled.
Press PROGRAM button to select program mode in stop mode. Enter track numbers that you want to add to program list. For the track numbers which are greater than 9, use +10 button. Each press increases the number by 10.Then type the second digit of track number. Press ENTER button to finish the program entry. Screen is cleared and it will start playing the program list.

- 26 -

If you attempt to enter a number greater than the total number of tracks on disc, the search box disappears and symbol appears on up-left corner of screen.
Subtitle Selection for MPEG4, DivX(R), X-Vid: Files with logo are subtitles files. Subtitle files with
.sub,.txt,.srt,.smi,.psb and.ass extensions are supported by this device. You can enable display of subtitles by pressing ENTER key when you are on the subtitle file. The synchronization of the subtitle with the audio and video depends on the subtitle file content. Please be sure that the correct subtitle file is recorded on the disc and selected. Files with logo are DivX, MPEG4 or X-Vid files. Use

You can remove the last track of the play list by pressing the CLEAR button. The program is cancelled when: - The disc tray is opened or closed. - The power is turned off.

SMART NAVI

To see the directory structure (menu) of JPEG/MP3/MPEG/ MPEG4/DivX CDs, you should set SMART NAVI option to WITH MENU in setup page. If SMART NAVI option is set to NO MENU, the content is automatically played without displaying menu.
arrow keys to navigate between the files and press ENTER key when you are on the film. If you select a subtitle file prior to the playback of the film, subtitle will be displayed during playback. W hen subtitles are displayed, you can adjust the position where subtitle is displayed by 6/5 keys. JPEG File : Select a file on JPEG CD. Slide Show starts automatically.
Basic Play 1. Press ON / STANDBY to turn on the power. 2. Press OPEN/CLOSE to open the disc tray. 3. Place a disc onto the tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position. 4. Press OPEN/CLOSE to close the disc tray. DISC LOADING message appears on screen. Please wait for a moment. SMART NAVI appears. Directories are on the left part and files in the selected directory are on the right part. 5. Press 6/5 to select file to be played. In the stop mode, you can navigate in all directories. If an MP3 track is playing, only the current directory can be used for navigation. 6. Press ENTER to play a file. If a file is focused on the left part, the preview of the item is displayed. If a folder is focused on the left part, the total number of files in that directory is displayed. MP3/MPEG/MPEG4/DivX File : Select a file on MP3/MPEG/MPEG4/DivX CDs to start play. Elapsed or Remaining Time is displayed according to Time Mode. Stopping Play Press STOP (<). The play is stopped. STOP appears on screen. Pause Press PLAY/PAUSE button during playback. The play freezes. PAUSE appears on screen. To return to normal play: Press PLAY/PAUSE again.
Fast Forward / Reverse For MP3/MPEG/MPEG4/DivX(R) : Press FW D 8 or REV 7 during playback to increase/ decrease play speed.
No sound will be heard during fast forward or reverse. Skip Forward / Backward Press SKIP / STEP : or SKIP 9 during playback. Next or previous file in the current directory will be played.

- 27 -

Instant Skip / Backward Only for DivX files: Press 3/4 key for instant skip / backward during DivX files playback.
Program Function Press PROGRAM to select program mode in stop mode. PROGRAM Message appears. Pres s number buttons to select files in the current directory. Alternatively, you can use 5 / 6 keys and then press ENTER to add selected file into the program list. PROGRAM Message appears with the current file index and the total files in the list. Press STOP to finish program. PROGRAM Message appears at the bottom of SMART NAVI. Press PLAY/PAUSE to start program. PLAY Message appears. Files in the program list are played sequentially.
Image transformation Only for JPEG : Press PLAY / PAUSE to start slide show. There are three modes of transformation: - Invert - Mirror - Left - Right These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed. The arrow keys are used to select the different transformation modes. Press 5 to invert/normal Press 6 to mirror Press 3 to turn left Press 4 to turn right Zoom Only for JPEG: Press PLAY / PAUSE to start slide show. It is provided both ZOOM in/out and Zoom pan functions for JPEG pictures. Press ZOOM to turn ON/OFF this function W hen this mode is on, any picture will be displayed at the last ratio selected by the user. A message will indicate the current ratio on screen. If zoom mode is ON, Press REV 7 or FWD 8 to control the ratio of zoom in/out.
You can use trick mode keys, skip prev/next files, and so on. You can remove the last track of the playlist by pressing the CLEAR button. The program remains even after the Program Play ends. If you want to quit program mode: Press STOP key if a track is being played. Press PROGRAM key twice. The program is cancelled when: - The disk tray is opened or closed. - The player is turned off. - In each directory change.

USING SETUP MENU

Press SETUP/DISP button on the remote control when the player is not in playback mode. The setup menu-main page appears. This is the menu where you can change the devices settings.
During ZOOM function, image transformation is disabled. Repeat M odes Press PLAY MODE to change current repeat mode. Repeat mode is displayed.
USING MAIN PAGE Select items using 6/5 buttons. The item will be highlighted when selected.
In SMART NAVI, it is displayed at the bottom. Displaying The Time Information Press TIME to change displayed time mode. Press ENTER to choose the highlighted item. The submenu for the selected item appears on the screen. SETUP menu will only be available when the player is not in playback mode.

If your TV set does not have a progressive scan feature, nothing will be displayed on screen when PROGRESSIVE is selected.

- 29 -

If you do not see anything on the screen or if you do not select OK within ten seconds, video output setting will be returned to previous setting automatically. If PROGRESSIVE is selected in the VIDEO OUTPUT menu and the unit is connected to a standard (analog) TV, no video output will be seen on the screen. To cancel the PROGRESSIVE mode: Press OPEN/CLOSE button and then TIME button. After that, enter the 3-digit number, 784 using number buttons. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV.
PARENTAL SETUP (Parental Level): Parental Level can be adjusted to one of the eight levels or NO PARENTAL. NO PARENTAL or level 8 ADULT adjustments let you watch all of the DVD titles ignoring the DVD discs parental level. You can watch the DVD discs, which have the same or lower parental level than the players selected level only. PASSWORD: Password to change the parental level can be set by using this option. Factory preset of the password is 0000. You have to set a 4- digit password when you select a parental level for the first time.You have to enter your password every time you want to change the parental level. If you forget your password, please contact technical service. Change Password: Using this item you can change the current password. To change the password, you will be prompted to enter your old pass word. Af ter you have entered your old password, you can now enter the new 4-digit password. You can use CLEAR key to delete the incorrect entry. Press OPEN/CLOSE to activate parental setup setting
AUDIO SETUP It is impossible to connect speakers directly to this DVD player unless an AV amplifier is used. COMPRESSION: Boosts frequency response. This item can be selected between OFF to MAX. LPCM OUTPUT: This item can be selected as LPCM 48K orLPCM 96K.
LANGUAGE SETUP Audio, disc menu and subtitle items will not be available if the player is in RESUME (Pre-Stop) mode. OSD LANGUAGE: You can select the default OSD language of the player menus. AUDIO: You can select the default audio language if supported by that DVD disc. SUBTITLE: You can select the default subtitle language if supported by that DVD disc. DISC MENU: You can select the DVDs disc menu language among thes e languages. Disc menu appears in the selected language, if supported by that DVD disc.
PREFERENCES ANGLE MARK, SMART NAVI and DEFAULTS items will not be available if the player is in RESUME (Pre-Stop) mode.
ANGLE MARK: This option allows you to turn ON/OFF the angle mark on the screen, which is displayed to indicate that a multi angle scene has started. It also shows which angle you are currently watching. STANDBY TIME: Standby activation time can be adjusted or standby can be disabled when using this option. Standby can only be activated when one of the time option is selected and no button is pressed during the selected time duration in stop mode. SMART NAVI: This option allows you to enable or disable the SMART NAVI, which is used for playing MP3, MPEG, MPEG4, DivX or JPEG CDs. TRANSPARENCY: Using this option to select one of the transparency levels for on screen display.

PARENTAL SETUP PARENTAL SETUP page will not be available if the player is in RESUME (Pre-Stop) mode. Playing some DVDs can be limited depending on the age of users. The Parental Control function allows playback limitation level to be set by the parents.

- 30 -

DEFAULTS: If you choose DEFAULTS, press ENTER button. The factory-presets are loaded. Parental level and parental password do not change.
DivX REGISTRATION There is a registration code in this page. This code is utilized to register this player with the DivX Video On Demand service. This will allow you to rent and purchase video using the DivX Video On Demand format. DivX VOD User Steps: 1. The user will open the DivX Registration page by entering the SETUP menu of the Player. 2. You will get the DivX VOD registration code from the player. T he addres s for the DivX VOD webs ite is : www.divx.c om/vod 3. After entering the address above on the Internet, go to the section where registration is to be made for DivX VOD membership. 4. Use the DivX VOD Registration (Activation) code that you rec eived from the player to regis ter and s et a username and a password for yourself. 5. Once the registration process is over, you have to download the DivX VOD activation file from the Internet and write it onto a disc. 6. After inserting this disc into the player and playing the activation file,you will have a new player DivX VOD Registration code activated for the player DivX VOD. 7. When you want to download and watch movies, enter the address www.divx.com/vod and you will be able to download movies with your pre-designated username and password by paying a certain charge. Upon writing this film on the disc and inserting it into the player, you can watch these the number of times that you are entitled to watch.

- 31 -

TROUBLESHOOTING
Make sure the DVD disc surface is not damaged. (Scratch, fingerprint etc.) Clean the DVD disc and try again. Ensure that the DVD disc is on the drawer with the label facing up. A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in Stand-by to dry the equipment. Disc does not play No disc in the player. -Place a disc onto the tray. Disc incorrectly loaded. -Ensure that the DVD disc is in the correct guide on the disc tray with the label facing up. Wrong type of disc. The player cannot play CD-ROMS etc. -Use disc with supported formats. The region code of the DVD must match the one on the rear panel of the player. Wrong OSD language Select the language in the set-up menu. The language for the sound or subtitles on a DVD cannot be changed. Multilingual sound and/or subtitles not recorded on the DVD. Try to change the sound or subtitles using DVD's title menu. Some DVD's do not allow the user to change these settings without using the disc's menu. Some functions (Angle, Zoom etc) do not work These functions are not available on the DVD. Angle can only be changed when the angle symbol is displayed. No picture Check that the player is connected to TV properly and all connections between the DVD player and other attached equipments are secured. Have you pressed the correct buttons on the remote control? Try once more. Make sure the TV TYPE and VIDEO OUTPUT are set correctly in VIDEO SETUP menu. No sound Check whether the volume is set to an audible level. Check whether the audio output connection is connected properly, see pages 14 to 17. Distorted sound Check that the appropriate listening mode setting is correct. No response from remote control Make sure the remote control is in the correct mode. Check whether the batteries are fitted correctly. Change the batteries. Operate the remote control within 30 angle on either side of the remote control sensor, up to a distance of approximately 6 metres. Operate the remote control on a straight path of the remote control sensor, up to a distance of approximately 7 metres. If nothing works If you have tried the above solutions and none seem to work, try switching your DVD off and on again. If this does not work, contact your supplier or DVD repair technician. Never attempt to repair a defective DVD yourself. - 32 -

doc1

1. Read these instructions.
2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Introduction
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

S3125A

13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.
16. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
17. Never insert objects of any kind into this apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the apparatus.
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Introduction
19. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious damage to the apparatus.

20. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction.

Precautions

Notes on handling
When shipping the DVD player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish. The top and rear panels of the DVD player may become warm after a long period of use. This is not a malfunction. When the DVD player is not in use, be sure to remove the disc and turn off the power. If you do not use the DVD player for a long period, the unit may not function properly in the future. Turn on and use the DVD player occasionally.
Notes on moisture condensation
Moisture condensation damages the DVD player. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.
le of mo Examp ensat isture ion! cond

Optical pick-up lens

Notes on locating
Place the DVD player on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. The loaded disc may come off the proper position and cause damage to the DVD player. When you place this DVD player near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the DVD player away from the TV, radio, or VCR.
Moisture condensation occurs during the following cases. When you bring the DVD player directly from a cold place to a warm place. When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit. In summer, when you use the DVD player in a hot and humid place just after you move the unit from an air conditioned room. When you use the DVD player in a humid place.

Its too warm!

Notes on cleaning
Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the DVD player. If you use a chemical saturated cloth to clean the unit, follow that products instructions.
Do not use the DVD player when moisture condensation may occur. If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the DVD player to the wall outlet, turn on the DVD player, and leave it for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture. Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur.

Accessing a Specific Location Directly. 34
Entering the time counter of the desired location.. 34

Playing Repeatedly.. 35

Repeating a title, chapter, or track. 35 Repeating a specific segment. 35
Table of Contents.. 11 Identification of Controls.. 12
Front panel... 12 Rear panel.. 12 DVD display.. 13 Remote control.. 14 Loading batteries.. 15 Operating with the remote control. 15
Playing in a Favorite Order.. 36
Setting titles, chapters, or tracks in a favorite order... 36
Playing in Random Order.. 37
Playing titles, chapters, or tracks in random order... 37

Zooming a Picture.. 38

Zooming a picture.. 38

Connections

Connecting to a TV.. 18
Connecting to a TV... 18 Connecting to an audio system and TV equipped with component video inputs. 19
Selecting the Sound Enhancement (E.A.M.).. 39
Selecting the sound enhancement.. 39
Selecting the Camera Angle. 40
Changing the camera angle.. 40
Connecting to Optional Equipment. 20
Connecting to an amplifier equipped with a Dolby Digital decoder.. 21 Connecting to an amplifier equipped with Dolby Pro Logic Surround.. 21 Connecting to an amplifier equipped with a DTS decoder.. 22 Connecting to an amplifier equipped with an MPEG2 audio decoder.. 22 Connecting to an amplifier equipped with a digital audio input... 23

Selecting Subtitles.. 41

Selecting a subtitle language.. 41
Selecting a Language.. 42
Selecting a playback audio setting.. 42

Quick control

Using the Graphic Remote Control - V-REMOTE -.. 46 Selecting the Playback Function - QUICK -.. 47 Accessing Features - NAVI -... 48

Basic playback

Playing a Disc... 26

Basic playback.. 26

Function setup
Customizing the Function Settings. 56
Setting procedure.. 56 Setting details.. 58
Variable Speed Playback.. 28
Playing in fast reverse or fast forward directions.. 28 Playing frame by frame.. 28 Playing in slow-motion. 29 Resuming playback from the same location. 29

Table of Languages.. 65

DVD video disc

During playback:

Example

TITLE GROUP CHP TRK TOTAL REMAIN MEMORY RANDOM A-B

VIDEO CD

Audio CD

DVD-AUDIO SVCDVD

Playing chapter 3 Elapsed time of of title 2 the current title Some discs may not display chapter numbers. A time indication not accompanied with a chapter number shows elapsed time of a segment within the current title.
Playing track 6 Elapsed time of the current track Some discs may not display track numbers or elapsed time.
Playing track 6 Elapsed time of the current track
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in for details.

Remote control

OPEN/CLOSE button 26 FL DIMMER button 13 ZOOM buttons 38
QUICK V-REMOTE NAVI OPEN/CLOSE FL DIMMER SETUP
Power button 26 SETUP button 56
E.A.M button 39 NAVI button 48

TOP MENU MENU

QUICK button 47 TOP MENU button 30
MENU button* V-REMOTE button 46

CLEAR RETURN

ENTER button 56 Direction buttons 56 ( / / / ) CLEAR button 31 PAUSE/STEP button 27 SKIP buttons Number buttons 31
ANGLE SUBTITLE AUDIO COLORSTREAM SELECTOR PAUSE/STEP PLAY STOP
RETURN button 56 STOP button 27

SKIP REV FWD

PLAY button 26

SEARCH

T +10 0
FWD button 28 REV button 28 T button 31 SLOW buttons 29 COLORSTREAM SELECTOR button 19 A-B RPT button 35

ANGLE button 40

RANDOM MEMORY REPEAT A-B RPT
RANDOM button 37 SUBTITLE button 41 MEMORY button 36
AUDIO button 42 REPEAT button 35
* MENU button Use the MENU button to display the menu included on many DVD video discs. To operate a menu, follow the instructions in Locating a title using the top menu. 30

Loading batteries

Operating with the remote control
Point the remote control at the remote sensor and press the buttons.

On-screen display Amplifier equipped with a Dolby Digital decoder To OPTICAL type digital audio input To COAXIAL type digital audio input

Select: Bitstream D

Audio Out Select Recording system

Connect either.

75 coaxial cable Optical digital cable
Connecting to an amplifier equipped with Dolby Pro Logic Surround
Dolby Pro Logic Surround You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in Connecting to an amplifier equipped with a Dolby Digital decoder. Refer to that amplifiers owners manual and set the amplifier so you can enjoy Dolby Pro Logic Surround sound. With an amplifier not equipped with Dolby Digital Connect the equipment as follows.
Amplifier equipped with Dolby Pro Logic Surround To audio input To 2CH AUDIO OUT
Be sure to set Audio Out Select to Bitstream or PCM when you enjoy sounds of Dolby Pro Logic Surround using this connection.
* Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.

Audio cable

Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS) DTS and DTS Digital Surround are DTS is a high quality surround technology used in theaters and now available for trademarks of Digital Theater Systems, Inc. home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 Use DVD video discs or audio channel DTS encoded sound tracks on DVD video discs or audio CDs. CDs encoded via the DTS recording system. Make the following setting.
Amplifier equipped with a DTS decoder
On-screen display Audio Out Select Recording system

Select: Bitstream DTS

To OPTICAL type digital audio input
To COAXIAL type digital audio input
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. Use DVD video discs encoded via the MPEG2 recording system. Make the following setting.
On-screen display Audio Out Select Amplifier equipped with an MPEG2 audio decoder To OPTICAL type digital audio input To COAXIAL type digital audio input

Select: Bitstream MPEG

Recording system
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers). Make the following setting.

On-screen display Audio Out Select Select: PCM Page
Amplifier equipped with a digital audio input To OPTICAL type digital audio input To COAXIAL type digital audio input

Begin your operation.

Playing a Disc Variable Speed Playback Locating a Desired Section

Playing a Disc

This section shows you the basics on how to play a disc.
CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. POWER indicator

2, 4 PAUSE

DVD display / DVD-V VCD CD / ENTER

STOP MENU TOP MENU

Preparations When you want to view a disc, turn on the TV and select the video input connected to the DVD player. When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD player.
Press the power button (POWER).
The DVD player turns on and the POWER indicator on the player illuminates.
Press OPEN/CLOSE to close the disc tray.

OPEN/CLOSE

Playback starts.
When the DVD player is turned on for the first time, an on-screen display will appear to provide initial settings. Press the / buttons to select an item, and press the , and ENTER button. See the pages in make a selection using the / buttons, then press the ENTER button. On-Screen Language TV Shape 58
If you insert a DVD video disc that contains a top menu, a menu may appear. See Locating a title using the top menu. 30 You may need to press the TOP MENU or MENU button to display disc menu (depending on the actual DVD video disc.)
After making all the settings, select press the ENTER button.
Note If the disc tray contains a disc you have already played, playback will begin from the location where you last stopped playback. 29

Press OPEN/CLOSE.

To start playback in the stop mode

Press PLAY.

The disc tray opens.
Place a disc on the disc tray.
With the playback side down.
There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place a disc which is unplayable in this DVD player.

1 2, 4

TOP MENU MENU / / ENTER STOP PLAY PAUSE/STEP
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

Repeating a specific segment
Press A-B RPT at the beginning of the segment (point A) you want to play repeatedly.

A-B RPT

Press A-B RPT again at the end of the segment (point B).
The DVD player automatically returns to point A and starts repeat playback of the selected segment (A-B).

AB Repeat

Notes Some discs may not permit A-B repeat operation. You cannot set the A-B repeat function for a segment that includes multiple camera angles 40. You can specify a segment only within the current title. There may be a slight difference between point A and the location where playback actually resumes depending on the disc.
Playing in a Favorite Order
You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. (Memory playback)

/ / / / ENTER

Setting titles, chapters, or tracks in a favorite order
To change the programmed selections
1 While the display appears on the TV screen, press the / / / buttons to highlight the item you want to change. 2 Change the selection following the instructions in step 2.
Insert a disc and press MEMORY during stop.
The following display appears.

Memory List 7

T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:--T:-- CT:---
To cancel the programmed selections
1 While the display appears on the TV screen, press the / buttons to highlight the item you want to cancel. 2 Press CLEAR.
T: Title number CT: Chapter number or track number
Select the items in the order you want by pressing the number buttons, then ENTER for each item.
Each time you press the / buttons, the spaces of T and CT are highlighted in turn. Highlight where you want to enter, then press the corresponding number buttons. To select tracks from a VIDEO CD/audio CD in order, press the number buttons for the track, then press the ENTER button for each selection you want.

Using the Graphic Remote Control - V-REMOTE Selecting the Playback Function - QUICK Accessing Features - NAVI -
Using the Graphic Remote Control - V-REMOTE Pressing one button can display a graphics based on-screen remote control that allows you to control playback as if you were doing it from the actual remote control.
Using the graphic remote control

Icons and features

See the pages in for details on the features.
During playback, press V-REMOTE.

V-REMOTE

The graphic remote control (Virtual Remote) appears. For the meaning of each icon, see right. e.g. DVD-V

1::3 0

* * * ** ** **
Function Current title/track number Current chapter number Elapsed time of the current title/track Audio setting Subtitle setting Angle setting Reverse slow motion playback Pause / Frame by frame playback To begin slow motion playback

Page

Press / / / to select the icon, and press ENTER.
Playback starts from the beginning of the current chapter or track. Normal playback To locate succeeding chapters or tracks. Fast reverse playback To stop playback.
To turn off the Virtual Remote

Press V-REMOTE.

Fast forward playback To turn off the Virtual Remote.
* You can access a desired location. After step 2, perform the steps below:
Note Some discs may not permit this operation.

: steps 3 to 5 on 31

: steps 2 and 3 on
** After step 2, a sub menu will appear. Perform step 2. on the page in
Selecting the Playback Function - QUICK Pressing one button can display a list of playback functions which are relevant to your current playback mode. You can check and modify them from the list.
Selecting the playback function
During playback, press QUICK.
The following on-screen display appears. (The actual display will vary depending on the playback status.) e.g. DVD-V
The on-screen display disappears and playback will resume according to your selection.

Quick menu

Quick Memory Repeat AB (Set A) Random Bit Rate Text Exit

Angle Viewer You can display all camera angles simultaneously and select your preferred one from them. After selecting this icon and pressing ENTER, the following on-screen display appears: e.g.
When the scene contains 9 camera angles:
1 Pause playback at a scene you want to capture. 2 Press / to select.
1-9 : To select the camera angle. : To quit the on-screen display. Storing: To sample and store the current picture in the player memory. Exit: To quit the on-screen display. 3 Press ENTER.

2 Press ENTER.

The stored picture will be displayed as a background picture when the player is in the stop mode. It is necessary to confirm this process via the setup menu 62.
Notes You can store only one picture. Storing a new picture will erase the old one. No operations are permitted in process of sampling and storage of background picture.
Picture Setting You can fine adjust picture quality and store up to 3 custom picture settings in the memory of the DVD player. After selecting this icon and pressing ENTER, the following on-screen display appears: e.g.
3 Press ENTER. The sub menu appears. 4 Press e.g. / to adjust the value, and press ENTER.
Contrast : Brightness : Color: Tint : DNR*1 : Edge Enhance*2 : All Reset :
-7 (Lower) to +7 (Higher) -7 (Darker) to +7 (Brighter) -7 (Duller) to +7 (Brighter) -7 (Redder) to +7 (Greener) On / Off On / Off To restore all the elements to the normal setting. A message will appear. Follow the procedure displayed on-screen.
to select, and press ENTER.
*1: DNR: Digital Noise Reduction. To view a picture with less video noise.
Notes Actual picture enhancement may vary depending on the quality of the disc. While the DNR feature can provide additional improvement in the reduction of noise in the video signal, it may produce undesirable picture artifacts on some discs. Depending on the disc, some kinds of picture details may be lost by the picture enhancement.
(Standard) : Normal setting. 1, 2, 3: Select the desired custom memory number. (Follow steps 2 to 4 below.) 2 Press / to select the element.
*2: To enhance picture edges.
e.g. When you select Color:
Picture Setting +1 Contrast 1 Brightness Color Tint DNR Off Edge Enhance Off All Reset
The Tint adjustment is not available when connecting to a TV via the component video jacks (Y, PB, PR).
Display You can view information about a disc and its operational status on the TV screen. After selecting this icon and pressing ENTER, the following on-screen display appears: e.g.

Notes The vocal output feature is used during playback of Dolby Digital (multi-channel) recorded DVD KARAOKE discs. This feature allows you to turn off vocal audio tracks, or restore them for background accompaniment. When playing KARAOKE, connect appropriate audio equipment such as an amplifier to the DVD player.
Language On-Screen Language ENG Disc Menu Language ENG Audio Language ENG Subtitle Language
English: To view on-screen displays in English. Franais: To view on-screen displays in French. Espaol: To view on-screen displays in Spanish.

Disc Menu Language

English: French: Spanish: Others:
To display disc menus in English. To display disc menus in French. To display disc menus in Spanish. To make a further choice. After pressing the ENTER button, follow steps 1) - 4) below.
1) Obtain the abbreviation of the preferred language from the list 65. 2) Select the first character by pressing the / buttons. 3) Press the / buttons to shift and select the second character by pressing the / buttons.
English French Spanish Others Code E S
4) Press the ENTER button.
Note Some DVD video discs may not include your preselected language. In this case, the DVD player automatically displays disc menus consistent with the discs initial language setting.

Audio Language

3) Press the / buttons to shift and select the second character by pressing the / buttons.
To play sound tracks in English. To play sound tracks in French. To play sound tracks in Spanish. To make a further choice. After pressing the ENTER button, follow steps 1) - 4) below.
English French Spanish No Subtitle Others Code A A
Notes Some DVD video discs may be set to display subtitles in a different language than you selected. A prior subtitle language may be programmed on the disc. Some DVD video discs allow you to change subtitle selections only via the disc menu. If this is the case, press the MENU button and choose the appropriate subtitle language from the selection on the disc menu.
Note Some DVD video discs may be played in a different language than you selected. A prior language may be programmed on the disc.

Subtitle Language

English: French: Spanish: No Subtitle: Others:
To display subtitles in English. To display subtitles in French. To display subtitles in Spanish. To disable subtitles. To make a further choice. After pressing the ENTER button, follow steps 1) - 4) below.
1) Obtain the abbreviation of the preferred language from the list 65. 2) Select the first character by pressing the buttons.

AB C AB C

Display On-Screen Displays On Background Gray Screen Saver On
Operation Pause/Still Auto Parental Lock Off Remote Confirmation On Title Stop Off PBC On

On-Screen Displays

) are not ) are

Pause/Still

Off: Operational modes (e.g. displayed. On: Operational modes (e.g. displayed on-screen.
For normal use. Still and fast motion images can be paused. Frame: The resolution of still pictures is improved, so that you can make a motionless picture more clearer when you pause it.

Background

Blue: Blue background. Gray: Gray background. Capture: To use a picture you sampled and stored in the memory using the Capture feature 51 as a background. Jacket: To use the jacket picture included on some discs as a background. If it is not included, a gray background will be substituted.

Parental Lock

DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental lock level and the way a DVD video disc can be controlled may vary from disc to disc. For example, if the disc allowed you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or lock out playback of the disc altogether.
DVD video discs may or may not respond to the parental lock settings. This is not a defect in the DVD player. Make sure this function works with your DVD video discs.

Screen Saver

Off: The screen saver is disengaged. On: The screen saver operates.
Off: The parental lock feature does not function. After pressing the ENTER button, follow step 1) below. On: To activate the parental lock feature or change the settings. After pressing the ENTER button, follow steps 1) - 3) below.
Parental Lock Security Code
1) Press the number buttons to create a personal 4-digit security code, then press the ENTER button. If you make a mistake before pressing the ENTER button, press the CLEAR button and enter your 4-digit security code again. 2) Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list below.
Country/Area AUSTRALIA BELGIUM CANADA CHINA CHINA HONG KONG DENMARK FINLAND FRANCE GERMANY INDONESIA ITALY JAPAN MALAYSIA NETHERLANDS NORWAY PHILIPPINES RUSSIAN FEDERATION SINGAPORE SPAIN SWEDEN SWITZERLAND TAIWAN THAILAND UNITED KINGDOM UNITED STATES Code AU BE CA CN HK DK FI FR DE ID IT JP MY NL NO PH RU SG ES SE CH TW TH GB US
3) Press the / buttons to select the parental lock level, then press the ENTER button.
Parental Lock US Area Code 7 Level
You cannot play DVD video discs rated higher than the level you selected unless you cancel the parental lock function. For example, when you select level 7, discs rated higher than level 7 are locked out and cannot be played. The parental lock level is equivalent to the following USA movie ratings. Level 7: NC-17 Level 6: R Level 4: PG 13 Level 3: PG Level 1: G The parental lock levels for other countries/areas than U.S. are included for future use. Check the appropriate parental lock level when you buy a DVD video disc equipped with the parental lock feature in the future.

PT QU RM RN RO RU RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SV SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU
Portuguese Quechua Rhaeto-Romance Kirundi Rumanian Russian Kinyarwanda Sanskrit Sindhi Sango Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tongan Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapk Wolof Xhosa Yoruba Zulu
Before Calling Service Personnel Specifications LIMITED WARRANTY DVD PLAYER
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.

Symptoms and correction

Symptom No power. The DVD player turned off by itself. No picture. Cause The power plug is disconnected. The automatic power off function turned the unit off. The TV is not set to receive DVD signal output. The video cable is not connected securely. No sound. The equipment connected with the audio cable is not set to receive DVD signal output. The audio cable is not connected securely. The audio receiver or TV is turned off. The setting of output sound format is incorrect. The playback picture has occasional distortion. The disc is dirty. It is in fast forward or fast reverse playback. The effect of copy protection. Correction Connect the power plug securely into the wall outlet. Press the PLAY button. Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. Connect the video cable securely into the appropriate jacks. Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. Connect the audio cable securely into the appropriate jacks. Turn on the equipment connected with the audio cable. Select the proper audio setting. Eject the disc and clean it. Sometimes a small amount of picture distortion may appear. This is not a malfunction. Connect the DVD player directly to the TV. Avoid connecting the DVD player to a VCR or TV/VCR combination. Insert a disc. Insert a playable disc. (Check the disc type.) Place the disc with the playback side down. Place the disc correctly inside the guide on the disc tray. Clean the disc. Cancel the parental lock function or change the parental lock level. These operations may prevent a proper progress of the contents. Turn the power on or off with the POWER button. Or disconnect the power plug and insert it into the wall outlet again. Point the remote control at the remote sensor of the DVD player. Operate the remote control within about 7 m. Replace the batteries with new ones. Page 26

ATTENTION CANADIAN CONSUMERS: Canadian consumers are requested to complete the special Canadian Warranty Registration Form enclosed, and forward this completed form with a copy of bill of sale to TOSHIBA OF CANADA to Register and Validate their warranty. Product must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by these warranties. IMPORTANT: PACKING AND SHIPPING INSTRUCTION When you send the product to a Service Station, you must use the original carton box and packing material, then insert the original carton box containing the unit into another carton using more packing material.

 

Tags

PC1555 Vwbn2 Image DX6340 NAD HTR3 Player N120 MF6590 MDR-IF3000 Boss DD-6 Portable AVR-1507 KH 2381 Vectra VLI8 TL-SL2428WEB 42FD9944-01S DCR34W NWZ-X1060 HW-C1460tve Me-U B5310 Floor POD A7N8x-XE DR150 PJ400 F1061 RW721 Easyshare C613 HT-THX25R UE-37C5100 Cuep2-M ZOB985QPX CT-500J Sillage 1000 Data 2000 EJS710QEO Laguna CD43 UR 12 32PW8505-12 Star Wars I8000 W2253V Toshiba A110 FV-500H IC-F1010 2253BW Kxtg4013 CD2402S CD1402B KX-T7720 BC146 Focus-2007 NSC-GC1 Sc07 DCM485 TH-42PZ80A LAC6900RIN Arcam AV9 Rack PA VBP3000 300 Plus S10 1996 RCD-1072 HMX-S10BP Esga21 GR-349sqfa IP1500 Siemens M55 900087 2525I BIW125W KDC-4090R RDR-VX525 Clock UF-8200 Review E-series FX-85ES SDR-H20GC Roland E-66 Reconnect M203 TX-32PS5 T2030 Biloba 680 U7142 V2 0 GCS1742 FS-C5020N VPC-CA9GX Switch G2180 EWH-150R MRF-350 DPL680 N130-JA01 Pixi Plus Lansing 121I GO 910 KDC-W5641U KLV-40ZX1M VRD-MC1 MZ-N10 KR910K

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101