efi Sports Medicines Total Gym PowerTower: Unsurpassed Athletic Training and Rehabilitation Benefits at the Touch of a Button
When injury strikes, a professional athlete must often place his or her career in the hands of an athletic trainer. That was the case when San Diego Chargers quarterback Drew Brees suffered a potentially careerending shoulder dislocation that required immediate surgery. As the season ended, many questioned whether he could return to his original form. The only people who didnt question his comeback were Brees and his athletic trainer, Todd Durkin, M.A., C.S.C.S., owner of Fitness Quest 10, a health and human performance center located in San Diego, Calif. From rehab to high-level athletic training, Durkin relies on Total Gym PowerTowerTMthe electronic version of efi Sports Medicines flagship incline training apparatus, Total Gymfor its unparalleled convenience and effectiveness. We put Drew on the PowerTower early in the reconditioning process, says Durkin. We needed to increase his range of motion before transitioning to higher-intensity activities. The PowerTower makes it easy to change positions or adjust the intensity with just the push of a button. Brees was able to start throwing again just four months after surgery and was back in top form for the start of the 20062007 season.
All-in-One Machine is Powerful Tool for Athletic Trainers
Ask Durkin about the PowerTower and hell give you a laundry list of benefits: improved strength, hypertrophy, flexibility, balance, power, endurance, joint integrity and core strength. And hes just getting started. The PowerTower is the ultimate all-in-one machine, explains Durkin. Its well-designed, space-efficient and extremely versatile. And it uses an exercisers own body weight and provides a wide range of intensities, which makes it ideal for everyone October 2006
Todd Durkin, MA, CSCS, NCTMB
2005 ACE Personal Trainer of the Year, 2004 IDEA Personal Trainer of the Year, Owner of Fitness Quest 10 & Todd Durkin Enterprises in San Diego, CA
from high-level athletes to senior citizens. Durkin is one of countless athletic trainers who have discovered the advantages of training clients on the PowerTower. efi Sports Medicine, the trusted leader in functional exercise equipment for the physical therapy and athletic training market, has created the number one piece of equipment for athletic trainers and physical therapists across the country. Designed, engineered and manufactured to meet the rigorous needs of the most demanding clinical environments, the PowerTower was created for wellness centers, clinical therapeutic exercise, athletic training and high-performance, functional sports training. Durkin knows a thing or two about the specific training requirements of athletesalong with Brees, he counts San Diego Chargers running back LaDainian Tomlinson, 2005 Heisman October 2006
Trophy winner Reggie Bush, and some 25 other NFL superstars as clients. In addition to increasing total-body strength, he uses the PowerTower to train his athletes for a variety of skill sets, including power and balance, and to enhance range of motion and flexibility. There are so many different factors that can contribute to the success or failure of an athlete, Durkin explains. Rotation, for example, is a huge factor in just about every sport, including tennis, baseball and, of course, golf. I can put a client on the PowerTower and have them perform a variety of torso rotation exercisesincline or decline, while lying down, seated, kneeling or even standing. With so many exercises, we can really maximize muscle fatigue without having to transition between different machines. The PowerTower engages all muscle groups with more than 200 strength, flexibility and Pilates exercises on
infinitely adjustable and calibrated levels of incline resistance. The PowerTower offers multi-plane upper and lower-body stretching and strengthening exercises. It offers a ground-breaking dynamic pulley system that adjusts to a clients girth and height to allow for optimum force angles specific to each individual.

Core Strength: The Foundation of Athletic Training
When it comes to training athletes or just about anybody, for that matteryou cant overlook core training. If you want to be successful in sports or life, you have to train the core, Durkin explains. It is the powerhouse of the body. In fact, sixty percent of your power is generated from your core. It provides a strong pillar in which you can be a strong, fast, powerful and explosive athlete. One of the advantages of a
piece of equipment like the PowerTower is the significant amount of core activity in most all exercises. The PowerTowers rolling incline glideboard and cable pulley system provides an unstable, gravity-loaded environment that requires the client to recruit core muscles of the stomach and back to maintain stability. This occurs during most PowerTower exercises and is especially beneficial for athletic performance training. PowerTower provides unlimited incremental increases in resistance from 3% to 72% of the users body weight and 12 levels are pre-calibrated at 5 degree increments. At the press of a switch, an athletic trainer can increase or decrease the resistance load during an exercise in progress. This results in fewer transitions and a more cohesive exercise session. The PowerTowers Folding Platform and wide-based Telescoping Squat Stand fold compactly against the glideboard during storage. The Folding
Foot Holder, used for hamstring curls, ab crunches and more, locks into place for use and then easily tucks away. It also adjusts to
single- and dual-leg plyometric exercises using a variety of foot positions to efficiently increase an athletes power output.
The PowerTower is an ideal way to safely increase fast-twitch muscle fibers with much less impact on the joints.
accommodate larger foot sizes. The Squat Stand adjusts to three height settings, facilitating correct biomechanics for squats, bridges, calf raises and plyometric exercises. The PowerTower is an ideal way to safely increase fast-twitch muscle fibers with much less impact on the joints, says Durkin. We can do
PowerTowers Time-efficient Workouts Appeal to Athletes and Non-athletes Alike
Athletes arent the only ones who can appreciate the effectiveness and efficiency of a PowerTower workout. Durkin regularly surveys his clients about their use of the PowerTower. My clients, both men and women, really enjoy the versatility of a PowerTower workout. They know that they can get a great workout in just 30 minutes because they can quickly flow from one exercise to the next. No matter what your clients are training for, whether it is for restored function and mobility, performance training, endurance, stability, muscle mass or a lean physique, PowerTower can offer the functional training you want.

October 2006

Durkin agrees: Whether your client is an older adult, a housewife, a young person or an athlete, you can challenge them equally using the PowerTower.

About efi Sports Medicine
After more than a quarter century at the forefront of innovation in athletic training, physical therapy and home fitness, efi Sports Medicine has become the most trusted brand in the world for functional exercise equipment. Our goal, says Tom Campanaro, efis founder and CEO, is to provide quality products that help people achieve their health, fitness and rehabilitation goals. We deliver and guarantee results. efis products are well established tools for physical therapy, athletic training, functional rehabilitation and a best seller in the home fitness market. To date efi products are in more than 14,000 rehab clinics, schools, hospitals, athletic training centers, health clubs and 2.5 million homes worldwide. Visit efi on the Web at www.efisportsmedicine.com or call 800.541.4900 for more information.

TOTAL GYM POWER TOWER OWNERS GUIDE

OWNERS GUIDE 4900

TOTAL GYM POWER TOWER EFISPORTSMEDICINE.COM

CONGRATULATIONS

Thank you for purchasing Total Gym PowerTower. We welcome you as a valued customer and trust your PowerTower will provide you with unsurpassed convenience and versatility year after year.
Functional exercise equipment from efi Sports Medicine has set the standard for physical rehabilitation, athletic training and sports performance training for more than three decades. Now, PowerTower adds the dynamic dimension of electrical power. It allows: Unrestricted movement through all three planes of motion Proprioceptive training in every movement Recruitment of the core automatically Unloaded, early closed-chain exercise in a functional environment Calibrated, incremental increases and decreases in load PowerTower enables you to fine-tune clients exercise regimens. Resistance is adjustable during an exercise in progress with the press of a switch. The client remains on the glideboard as you raise or lower the level of resistance. As a result, your clients experience fewer transitions and more cohesive exercise sessions. Plus, adjusting the resistance level is effortless. Your PowerTower arrives with very little required in the way of assembly. Simply follow this Guide and in minutes your PowerTower will be operational.
In this Guide you will find tips about PowerTower and its component parts, operation, maintenance and care. Additionally, you will find safety tips and precautions to help ensure your safety and the safety of your patients and clients. Your Guide also includes warranty information. Please save this Owner's Guide and refer to it in the future. If you have any questions about PowerTower or if you need service, please contact us. Our goal is to provide you with the premier training tool for functional exercise, and we stand ready to assist you every step of the way. Sincerely,
Tom Campanaro, President/CEO efi Sports Medicine 7755 Arjons Drive San Diego, CA 92126 U.S.A. area code (858) 586-toll-free inside U.S.A. support@efisportsmedicine.com

2005, efi Corporation.

CAUTION: As with any exercise program, participants should consult a physician before starting a workout on PowerTower. Changes or modifications to this PowerTower may void the warranty and may violate U.S. Federal Communications Commission (FCC) Rules. Weight Capacity: PowerTower is rated at a maximum user weight capacity of 350 lbs [160 kg]. Additional weights with a weight bar can be applied to the glideboard. Do not exceed 650 lbs [295 kg] of weight-bearing on the PowerTower.

TABLE OF CONTENTS

Parts Identifier.......2 Box and Hardware Packet Contents.....3 Warnings......4 Fuse Replacement......4
Grounding Instructions......5 FCC Rules......6 Specifications.......6 Parts Assembly......7-8 Installing LAT Bars......9-13 Adjusting LAT Bars......14 Folding Platform......15 Telescoping Squat Stand......16 Pulley Locator Brackets......16 Rail Lock & Screw (optional)......16 Folding Foot Holder.....17 Adjusting the Rail Handle.....18 Folding and Storage......19-22 Getting Started......23-24 Safety Precautions......25 Troubleshooting......26 Maintenance and Care......27 Reading Resistance Chart.....27 Resistance Chart......28 Warranty Information......29

EFISPORTSMEDICINE.COM

PARTS IDENTIFIER - POWER TOWER

ZX (see INSET 8) Z

ZY (see INSET 8) A B
When parts are referenced throughout this guide, corresponding letters from this PARTS IDENTIFIER page are also listed. For example, when Tower appears within this guide, (A) will appear behind Tower as a cue to refer back to this page if needed.

INSET 1.

INSET 2. E1 E2
C (see INSET 1) Y (see INSET 7)

INSET 3.

INSET 4. (SIDE VIEW)
D E (see INSET 2) F (see INSET 3)
X W (on back of Tower; see INSET 6) V (on back of Rail; see INSET 6)
INSET 5. (BACK SIDE VIEW)

INSET 6. V

U T (on back of Tower; see INSET 5) S (on back of Tower; see INSET 5) R (on back of Tower; see INSET 4) O

M L N K P I J

INSET 7. (SIDE VIEW)
INSET 8. (BACK TOP VIEW) ZY ZX

A. Tower

E2. Lower Foot Pad Assembly F. Glideboard D Ring G. Glideboard H. Telescoping Squat Stand I. Folding Platform J. Lower Rail Base K. Lower Rails
L. Glideboard Wheel Housing M. Support Strut Knob N. Support Strut O. Emergency Stop Touchpad P. Tower Base Q. Transport Wheels R. Electric DC Motor

5. Care should be taken at all times when getting on and off the PowerTower or any exercise equipment. Falling on or off the product could result in injury, or possibly death. 6. Use the PowerTower only for its intended use. Do not use attachments not recommended by the manufacturer. 7. Never operate the PowerTower if it has a damaged Power Cord (S) or plug, if it is not working properly, emits an odor or unusual noise, if it has been dropped or damaged, or dropped into water. Contact the manufacturer for examination and repair. 8. Do not pull the PowerTower by the Power Cord (S) or use the Power Cord (S) as a handle. 9. Keep the Power Cord (S) away from heated surfaces. 10. Place the PowerTower on a flat level surface. Allow ample clearance for the Rails (K, X) to lower to their fully extended position. Do not store anything under the PowerTower. 11. Never drop or insert any object, including fingers, into any PowerTower opening. 12. Do not use the PowerTower outdoors. 13. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 14. To disconnect, turn all controls to the OFF position, then remove plug from outlet. 15. Keep fingers, loose clothing, and hair away from moving parts.
FUSE REPLACEMENT To replace 5A Fuse in Tower (A) back: - Unplug the Power Cord (S) from the power outlet. - Locate the fuse assembly near the power outlet on the Tower (A). - Use a flathead screwdriver to pull out the fuse assembly. - There are (2) 5A fuses in the fuse assembly. One is a spare. - The other is in use (Fig. 1). - Remove the old fuse from the clamp. - Push the old fuse far enough into the hole of the fuse assembly to release the spare fuse (Fig. 2). - Place the spare fuse into clamp (Fig. 3). - Dispose of the old fuse. Replace the fuse assembly. Figure 1 Figure 2

Figure 3

IMPORTANT NOTICE ABOUT PROPER GROUNDING WARNING: Connect the PowerTowerTM to a properly grounded outlet only. Improper connection of the equipment grounding connector can result in the risk of electric shock. Do not modify the plug that is provided with the PowerTower. If it will not fit in the outlet, have a proper outlet installed by a qualified electrician. See grounding instructions.

Figure 1

Figure 2
FOLLOW THESE GROUNDING INSTRUCTIONS The PowerTower must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The PowerTower is equipped with a Power Cord (S) having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER - Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

SPECIFICATIONS Power: 115 Volts and 5 Amps or 230 Volts and 3 Amps 50 or 60 cycles depending on the country where it is sold. Incline Speed: Approximately 30 seconds to ascend/ 20 seconds to descend. (Varies under load) Dimensions: Standing: 110 x 36 x 76 [L/W/H] (2.5 m x.9 m x 1.9 m) Folded: 24 x 36 x 63 [L/W/H] (.6 m x.9 m 1.5 m) Resistance: 4 to 34 increments are marked. 11 levels of calibration at 3 increments appear on the Resistance Chart (see page 28). 3% to 72% of body weight User Height Limit: 65 (2.0 m) Weight Capacity: PowerTowerTM is rated at a maximum user weight capacity of 350 lbs. [160 kg]. Additional weights can be applied to the glideboard on a weight bar, up to 650 lb [295 kg] maximum total.

FCC ID: UHJPOWERTOWER

ETL #3100548

PARTS ASSEMBLY

PUTTING YOUR POWER TOWERTM INTO OPERATION IS EASY. 1. 2. To begin assembly, remove your PowerTowerTM from the box. Stand the PowerTower upright. Find Hardware Packet (see page 3 for Hardware Packet Contents). Pull and twist the retractable Support Strut Knob (M) to loosen it.
With the other hand, push the Lower Rails (K) off and away from the Tower Base (P) by grasping the padded Center Rail Crossbar (W)and allow the Rails (K, X) to unfold slowly away from the Tower (A) until the Rails (K, X) are fully extended. CAUTION: Do not touch the hinge.

OWNERS GUIDE

While unfolding the PowerTower, as an extra precaution, hold the side of the Tower (A) with one hand to steady the Tower (A).

TOTAL GYM POWER TOWER

POWER TOWER SET-UP
PARTS ASSEMBLY (CONTINUED)
5. Engage and tighten the Support Strut Knob (M). You need to lean the tower backward slightly to engage the pin. IMPORTANT SAFETY NOTICE: The Support Strut Knob (M) must be engaged and tightened during PowerTowerTM use. 6. Remove the packing foam from the four wheels. To reposition the Glideboard (G) for use, kneel beside the Glideboard (G). Lift and pull one side of the metal Glideboard Wheel Housings (L) away from the Rails (K, X). Lift the opposite side of the Glideboard (G) until the wheels lift completely off the Rails (K, X). Move the Glideboard (G) about 6 inches up the Rails (K, X) toward the Tower (A), until the metal stop on the underside of the Glideboard (G) rests above the rubber bumper. Lower the Glideboard (G) and pull the Glideboard Wheel Housings (L) out as you lower the Glideboard (G) back into place. Connect the Power Cord (S) to the back of the PowerTower. Then connect the PowerTower to an appropriate receptacle. Turn on the PowerTower with the On/Off Switch (T) at the bottom back of the Tower (A). Remove the Safety Key (ZX) from the Hardware Packet. Use the loop in the Safety Key (ZX) lanyard to tie it to the Towers (A) back handle. Insert the Safety Key (ZX) into the hole on top of the Tower (A). Your PowerTower will not operate if the Safety Key (ZX) is not in place. Raise the Rails (K, X) to the desired level by using the Up/Down Switch (ZY) on top of the Tower (A).

9. 10. 11.

INSTALLING LAT BARS
13. 14. Raise the Rails (K, X) to Tower (A) to 20 degrees for ease of assembly, as shown. Ensure that the Support Strut Knob (M) is engaged and tight.
REMOVE THE SHIPPING SLEEVES - PHASE 1 15. Your PowerTowerTM arrives with shipping sleeves on the ends of the Tower Crossbar (Y). The shipping sleeves serve one purpose: to protect the Tower Crossbar (Y) during shipping. 16. NOTE: For easiest assembly, keep the Tower Crossbar (Y) centered throughout the assembly process, with each end extending about equal distance from the Tower (A). HARDWARE PACKET TOOLS NEEDED: To remove the first shipping sleeve, face the Tower (A) back and take one of the supplied Wrenches (GG) in each hand. The Wrenches (GG)are located in the Hardware Packet (contents shown on page 3).
INSTALLING LAT BARS (CONTINUED)
17. Apply one Wrench (GG) to the nyloc nut on one side of the Tower Crossbar (Y). Use the other Wrench (GG) to loosen the nyloc nut on the other side of the Tower Crossbar (Y) by turning counterclockwise. Set the shipping sleeve aside. Remove the nyloc nut, Chrome Washer (II) and the Bronze Washer (HH). Set them aside. Lift the Upper Rail (X) with one hand. Remove the first shipping sleeve from the Tower Crossbar (Y) with the other hand. To remove the remaining shipping sleeve, immobilize the exposed end of the Tower Crossbar (Y) by applying one of the Wrenches (GG) to the notch.

18. 19. 18 20.

21. 22. Use the other Wrench (GG) to loosen the remaining nyloc nut by turning it counterclockwise. Hold the Upper Rail (X) with one hand. Remove the shipping sleeve from the Tower Crossbar (Y) with the other hand. Set the shipping sleeve aside. Now that the shipping sleeves have been removed, you are ready to attach the first LAT Bar (B). You may discard the shipping sleeves or retain them in the event you need to ship your PowerTowerTM in the future. POSITIONING THE LAT BARS - PHASE 2 23. To position the first LAT Bar (B) for mounting, make sure the long, vertical side of the LAT Bar (B) aligns closest to the Tower (A). (The slotted holes face the back of the PowerTower, the black knob on the LAT Bar (B) faces the Glideboard (G).) 24. Slide a Bronze Washer (HH) onto the LAT Bar (B) cylinder. Stand beside the Tower (A) and align the LAT Bar (B) cylinder with the Tower Crossbar (Y). REMINDER: Keep the Tower Crossbar (Y) centered during assembly. 25. Slide the LAT Bar (B) cylinder onto the Tower Crossbar (Y) until it is securely seated on the Upper Rail (X). HINT: You will need to lift the Upper Rail (X) to slide the LAT Bar (B) cylinder inside the hole in the Upper Rail (X).

INSTALLING LAT BARS: POSITIONING THE LAT BARS - PHASE 2 (CONTINUED)
26. 27. Rotate the LAT Bar (B) upside-down until the other LAT Bar (B) is installed, and both nyloc nuts on the Tower Crossbar (Y) have been tightened. Return the Chrome Washer (II) to the end of the Tower Crossbar (Y) that extends beyond the LAT Bar (B) cylinder. Attach and finger tighten the nyloc nut onto the Tower Crossbar (Y) with the other hand.
Press against the nyloc nut to push the Tower Crossbar (Y) until it lies flush against the LAT Bar (B) cylinder. This will help seat the LAT Bar (B) against the Upper Rail (X). Repeat Phase 2 for the other LAT Bar (B). Tighten both LAT Bars (B) with the Wrenches (GG) until the nyloc nuts get hard to turn (no threads should be showing).
ATTACHING THE LAT BAR BRACKET - PHASE 3 29. Remove the remaining contents (shown on page 3)from your Hardware Packet. Lower the LAT Bar (B) to the Pull-up position.
INSTALLING LAT BARS: ATTACHING THE LAT BAR BRACKET - PHASE 3 (CONTINUED)
30. 31. Place a Chrome Washer (II) followed by a Bronze Washer (HH) on a Socket Head Screw (JJ). Feed the Socket Head Screw (JJ) partially through the elongated slot. Place another Bronze Washer (HH) on the Socket Head Screw (JJ) on the other side of the bracket. Thread the Socket Head Screw (JJ) into the hole in the rail. Align the Socket Head Screw (JJ) with the hole in the Upper Rail (X) inside the LAT Bar (B) bracket. Finger tighten the Socket Head Screw (JJ) 32. Tighten the Socket Head Screw (JJ) with the hex end handle of the Wrench (GG). Repeat Phase 3 (Attaching the Lat Bar Bracket) on the opposite side. 33. Attach the Handles (U) to the ends of the Dynamic Arm Pulley System (D) using the Quick Links (LL). With these steps completed, your LAT Bars (B) are assembled.

ADJUSTING THE LAT BARS

34. To adjust the LAT Bars (B), pull the retractable knob on the LAT Bar to disengage the Lat Bar from the Upper Rail (X) and rotate LAT Bars to the desired position. Ensure that the pin on the retractable knob is properly engaged.
LAT BAR ADJUSTS TO THREE POSITIONS 35. NORMAL USE: parallel (upright) to the Tower (A), perpendicular to Rails (K,X) PULL-UP POSITION: angled upwards from the Rails (K,X) FOLD UP POSITION: parallel to the Rails (K,X)

36. 37.

FOLDING PLATFORM
38. 39. 40. 41. Align the bottom of the Folding Platform (H) with the Lower Rails (K) just above the Lower Rail Base (J). Using the two holes just above the Lower Rail Base (J), slide the fixed pin into the hole in the outside left Lower Rail as you face the Tower (A). Pull the retractable pin on the right side and move the pin over the hole. Release the pin.
Move the Folding Platform (H) until all the pins engage completely.

TELESCOPING SQUAT STAND

42. 43. Align the Telescoping Squat Stand (H) over the Folding Platform (I) struts until the Telescoping Squat Stand (H) pins contact the top of the Folding Platform (I) struts. Pull the retractable pins and adjust the Telescoping Squat Stand (H) to the desired height, then release the pins and raise or lower the Telescoping Squat Stand (H) until both pins engage in one of the three adjustment holes in the Folding Platform (I) struts.

PULLEY LOCATOR BRACKETS

44. The Pulley Locator Brackets (C) are designed to adjust easily. Pull back on the pin, move the Pulley Locator Bracket (C) to the desired position on the LAT Bars (B) and allow the pin to engage the slotted hole. You should rotate the pulley toward the center of the LAT Bar as shown when moving the Pulley Locator Bracket (C) around the bends.
RAIL LOCK & SCREW (OPTIONAL)
44 45. If you intend to use your PowerTowerTM to do plyometrics at high inclines, and you do not intend to fold the PowerTower for storage often, you may wish to use this rail lock feature. Unfold the PowerTower, sit on the Glideboard (G), and screw in the long Rail Lock Screw (KK) (provided in the Hardware Packet) finger tight in to the Rail Lock (V). To remove it for storage, reverse the process.

Rail Lock

Rail Lock Screw

FOLDING FOOT HOLDER

46. 47. Your PowerTowerTM arrives with the Folding Foot Holder (E) in the down position. Prior to use, rotate the Folding Foot Holder (E) to the upright position. Simply pull on the retractable knob and raise the Folding Foot Holder (E) until the pin on the knob has engaged the Upper Rail (X). Be sure the Folding Foot Holder (E) is securely mounted in the upright position before proceeding.

48. 49.

NOTE: Remember to return the Folding Foot Holder (E) to its original lowered position to avoid interference with the Glideboard (G) during other exercises.
Sit at the top of the Glideboard (G) and place your heels past the pads of the Lower Root Pad Assembly (E2). Lower the Upper Foot Pad Assembly (E1) by pushing it down until the center post snap button has re-engaged.
To begin using the Folding Foot Holder (E), push in the center post snap button and raise the Upper Foot Pad Assembly (E1).

ADJUSTING THE RAIL ANGLE

50. To raise or lower the Rail (K, X) angle, stand alongside the Tower (A). Reach on top of the Tower (A) to the Up/Down Switch (ZY). Micro switches at the upper and lower ranges of resistance (4 degrees and 34 degrees respectively) halt movement at upper and lower resistance limits. Any time you release the Up/Down Switch (ZY), movement ceases. Any time you wish to use the glideboard free from the pulley cable assembly, simply unfasten and release the center cable pulley snap hook. Snap the center cable pulley to one of the LAT Bar pulley Locator brackets as shown.

51. 51 52.

FOLDING AND STORAGE
FOR STORAGE, POWERTOWER FOLDS EASILY. Press the Up/Down Switch (ZY) to raise or lower the Rails (K, X). Stop about halfway up the 53. Tower (A). Remove the Rail Lock Screw (KK) if it has been installed. HINT: Sit on the Glideboard (A) and remove the Rail Lock Screw (KK) from the Rail Lock (V) if it has been installed. 54-55. Position the Pulley Locator Brackets (C) at the fourth position on the LAT Bars (B). 56. Pull the retractable knob on the LAT Bars (B).

LAT Bar Positions

57-58. Lower the LAT Bars (B) into the folding position - parallel to Rails (K, X).
FOLDING AND STORAGE (CONTINUED)
59. 60. Attach the center pulley to the Glideboard D Ring (F). Lower the Folding Foot Holder (E) to the down position.
61-62. Fold the Folding Platform (I) and Telescoping Squat Stand (H). Pull the left side (as you face the Tower (A)) retractable pin, while pushing the Telescoping Squat Stand (H) forward until the retractable pin locks in place in the folded position. 60
63. 64. 65. Press the Up/Down Switch (ZY) until the Rails (K, X) descend to the lowest possible position and automatically stop. The Tower (A) will lean backward slightly. Release the Support Strut Knob (M) by unscrewing the knob and pulling it out. HINT: Gently rock the Tower (A) backward to help release tension on the Support Strut Knob (M) then pull it forward to the vertical position. IMPORTANT: Failure to release Support Strut Knob (M) can damage your PowerTowerTM. 66. Hold the Tower (A) while grasping the padded Center Rail Crossbar (W). Pull the Rails (K, X) up and toward the Tower (A).
67. 68. Pull the rails into A-frame position, making sure the Support Strut Knob (M) remains disengaged. Push the Rails (K, X) and the Tower (A) together. Stand the Lower Rail Base (J) on the Tower Base (P).

IMPORTANT NOTES:

69. When storing your PowerTowerTM, hang the Handles (U) out of the way, making sure that Dynamic Arm Pulley System (D) cables remain free from contact with hinges, the floor, or wheels. To move the PowerTower, stand behind the Tower (A), grasp the Tower (A) top, pull back in hand truck fashion and roll. To unfold PowerTower and return it to use, see the beginning of these instructions.
NOTE: Be sure to secure the Handles (U) away from the Tower Base (P) and Transport Wheels (Q) before moving.

OPTIONAL ACCESSORY

70. 71. 71 WEIGHT BAR The Weight Bar lets you add standard plate weights to the PowerTower to achieve greater resistance. Observe the instructions provided with each accessory.

GETTING STARTED

When using PowerTowerTM, wear athletic shoes and comfortable lightweight clothing. Tie long hair back to avoid contact with the center pulley. Before you begin, check to ensure that all parts are in place and working properly. Begin your exercise program at a low incline. As your proficiency increases, raise the incline to increase the intensity.
PROPER FORWARD ANCHORING SEQUENCE WITH ARM PULLEY SYSTEM ATTACHED TO THE GLIDEBOARD 72. 73. 74. 75. Grasp both Handles (U) in the hand closest to the Tower (A) as you stand to one side of the PowerTower. Pull the Glideboard (G) up the Rails (K, X) to the height needed to sit in the proper position for the specific exercise you will perform. EXAMPLE: If you are performing a sitting exercise, sit at the top of the Glideboard (G). If the exercise requires you to lie back, first sit at the bottom of the Glideboard (G) with one Dynamic Arm Pulley System (D) Handle (U) in each hand. 75
Remember to control the Glideboard (G) at all times, particularly when getting on or off your PowerTower. The following tips will help you stabilize the Glideboard (G) as you approach the unit for mounting in various positions. Use these mounting concepts when teaching patients to get on and off the unit.
When lying on your back, be sure your head is supported on the Glideboard (G). If the Glideboard (G) travels all the way to the top or bottom of its rolling distance during the exercise, adjust your body up or down on the Glideboard (G).
PROPER BACKWARD ANCHORING SEQUENCE WITH DYNAMIC ARM PULLEY SYSTEM (D) ATTACHED TO GLIDEBOARD (G)
77. 77 78. 79. Grasp Handles (U), then make a fist and place your knuckles at the top of the Glideboard (G) to anchor it in place. Now it is safe to sit, straddle or kneel on the Glideboard (G). When kneeling on the Glideboard (G), place knees one at a time just behind your fists as you face the Glideboard (G). Move to the starting position of the exercise and begin by using slow, controlled movements. ! 78

Failure to read and follow the safety instructions in this manual may result in serious injury or death. Hazards include falling, overexertion, strained muscles, pinched fingers or pulled hair. Changes or modifications to this PowerTower may void the warranty and may violate U.S. Federal Communications Commission (FCC) Rules.

TROUBLESHOOTING

In the event your PowerTowerTM does not function properly, there are steps you can take to determine where a problem may have occurred. Please follow these troubleshooting directions: 1. Power source. Make sure that the Power Cord (S) is plugged into the PowerTower and the wall. Check and determine that the plug on the wall is switched on. If there is a ground fault interrupter, check to see if it has been tripped. 2. PowerTower Power Switch. Make sure that the On/Off Switch (T) on the Tower (A) has been turned on. The light should glow red to indicate that the power is going into the PowerTower. 3. Fuse. If the red light indicator on the Towers (A) On/Off Switch (T) is not glowing, check the fuse located near the power outlet on the back of the Tower (A). Follow 5A fuse replacement instructions in the IMPORTANT INFORMATION ABOUT YOUR POWER TOWERTM section (page 4) of this guide. 4. Power Cord. Make sure the Power Cord (S) is not damaged. If Power Cord (S) appears damaged, go to Step 8 below and call Customer Service. 5. Support Strut. Make sure the Support Strut (N) is free of any objects that may have been placed on top of it. Handles (U), Dynamic Arm Pulley System (D) cables and pulleys, Folding Foot Holder (E) or any other objects will engage a sensor on the Support Strut (N) and cause the Electric DC Motor (R) to cease to operate. 6. Support Strut wires. If the wires that connect the Support Strut (N) to the Tower Base (P) have been damaged or broken, the PowerTower will not operate. Go to Step 8 below and call Customer Service. 7. AC voltage. An interruption in the flow of voltage can cause the PowerTower to cease functioning. As an example, should the AC voltage drop 40%, the PowerTower Electric DC Motor (R) will cease to operate. After the supply of voltage has been fully restored, the user can reset the machine by turning the On/Off Switch (T) off and then on again. The PowerTower will then resume functioning. 8. Safety Key. Make sure the Safety Key (ZX) is inserted into the connector hole located on top of the Tower (A). Your PowerTower will not operate if the Safety Key (ZX) is not in place. 9. After troubleshooting. If there is still a problem after checking all of the above items, please call 4900 to speak to a Customer Service Representative. 26

MAINTENANCE AND CARE

Your PowerTowerTM will offer you or your rehabilitation or wellness facility and your clientele years of easy operation if you follow these simple tips for maintenance and care. With periodic cleaning, moving parts and rolling surfaces will maintain their smooth function. Use chrome or car polish on all chrome parts to keep your PowerTower looking its best and to prevent dust build-up. Clean rail surfaces on a regular basis with a non oil-based window cleaner. CAUTION: DO NOT use any lubricants or silicone based products on the rails or rollers. This will cause the rollers to slide rather than roll, and will damage the rollers. You may use lubricant on the bearings, folding hinges and chains when needed. When lubricating these parts, remove any residue of lubricant from the cables, rails or roller surfaces. Clean the Glideboard (G) material with a non oil-based window cleaner. DO NOT use Armor All or like substances. These will make the glideboard slippery. Wipe down your PowerTower with a clean cloth. Check and/or tighten the shoulder bolts in the rails weekly.

Purchased From __________________________________________________________________

WARRANTY CLAIMS

efi Sports Medicine treats warranty claims as a priority. To process these quickly, a Return Merchandise Authorization (RMA) number is required to properly link your merchandise with your claim. efi Sports Medicine does not accept returned merchandise without an accompanying RMA number. Contact efi Sports Medicine Customer Service Department at 800-541-4900 if you are making a warranty claim. A representative will issue you an RMA number and instructions for proper packaging of the equipment for shipping. IMPORTANT! - Save your invoice. Please retain packaging instructions. Shipping Damage: FOB origin, unless otherwise specified. efi Sports Medicine accepts no responsibility for damage in shipping. efi Sports Medicine does, however, make every effort to facilitate the satisfactory resolution of claims made against delivery agents for damage during shipping. If the PowerTower appears to have sustained damage in shipping, or if the PowerTower appears to have shifted in delivery but no damage is evident, retain the shipping boxes until the PowerTower has been fully assembled to assure there is no functional damage that is not initially visible. In the event of damage during shipping, retaining the shipping boxes helps to facilitate your claim against the shipper.

2006, efi Corp.

Model Number ________________________________________________________________________ Serial Number ________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ TOTAL GYM POWER TOWER _______________________________________________________________________________ EFISPORTSMEDICINE.COM _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ ________________________________________________________________________________ ______________________________________________________________________________ _______________________________________________________________________________

Retain this form for your records.
Take photographs of damaged boxes or contents before opening.
efi Sports Medicine 7755 Arjons Drive San Diego, CA 92126 efisportsmedicine.com

2003, efi Corporation.

2003/2007, efi Corp./93223. All rights reserved. Patents Pending. Also covered by one or more of the following patents: D405,132; 4,004,801; 5,169,363; 5,967,955; D493,853; 6,921,355
LIMITED WARRANTY TOTAL GYM POWER TOWER TM Subject to the exclusions and other terms and conditions set forth below, Engineering Fitness International Corp. (efi) warrants the following components to be free from defects in materials and workmanship under normal usage for the period(s) specified below. This limited warranty is your exclusive remedy and applies to new products purchased in the United States, which are accompanied by this written warranty. efi, at its option, will repair, replace or refund the purchase price of any product that does not conform to this warranty. Repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation and shipping costs. efi may use functionally equivalent reconditioned/refurbished/pre-owned or new products, accessories and parts. This warranty is valid only for the original purchaser, and proof of purchase will be required. This warranty will be valid only if the Ownership Registration Certificate is completed and received by efi no later than 30 days after the date of purchase. This warranty extends only to the first purchaser, and is not transferable. Warranties outside the United States may vary. Ask for details. Exclusions from Coverage Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations such as emblems, graphics and other decorative elements, are excluded from coverage. Abuse and Misuse. Defects or damage that result from improper operation, storage, misuse or abuse, accident or neglect, subjecting the product to abnormal usage or conditions or other acts which are not the fault of EFI are excluded from coverage. Use of the product in any manner that is inconsistent with the instructions provided by efi is considered misuse and any defects or damage that result from such misuse are excluded from coverage. (contined on reverse side.)

TEAR AT PERFORATION.

To register for ownership, complete form on reverse side and return by mail, in envelope, to: efi Sports Medicine 7755 Arjons Drive San Diego, CA 92126 If you have any questions about your model or if you need service, please contact Customer Service at 4900.
LIMITED WARRANTY TOTAL GYM POWER TOWER TM (.contined from reverse side) [Commercial Use. Defects or damage that result from use of the product for commercial purposes are excluded from coverage.] Use of Non-efi Accessories. Defects or damage that result from the use of Non-efi branded or certified accessories are excluded from coverage. Unauthorized Service or Modification. Defects or damages that result from service, maintenance, repairs, adjustment, installation or alteration conducted by anyone other than efi or its authorized representatives are excluded from coverage. Limitation of Liability THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. IN NO EVENT SHALL EFI BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT. efi retains the exclusive right to repair or replace the product or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. NON-COMMERCIAL WARRANTY: Frame: Limited Lifetime (excluding coatings) Wear items: 2 years (includes moving parts and items not listed) Foam, rubber, upholstery, straps and webbing: 6 months Motor: 2 years COMMERCIAL WARRANTY: Frame: 5 years (excluding coatings) Wear items: 1 year (includes moving parts and items not listed) Foam, rubber, upholstery, straps and webbing: 90 days Motor: 2 years

OWNERSHIP REGISTRATION CERTIFICATE
PowerTower Purchase Date _____/_____/_____ Product Name ________________________________________________ Purchasers Name (print) ______________________________________________________________________________________ Address ________________________________________________________________________________ City ________________________________________________ State ________________ Zip_________ Phone _____________________ Email Address ______________________________________________
SERIAL NUMBER(S) ____________________________________________________________________
Signature ____________________________________________________________________________
Complete this form and return by mail, in envelope, to register ownership.