User's Guide

TL-SL3226P

24+2G Gigabit Managed Switch

Rev 1.0

E-mail: export@tp-link.com.cn
Trademark, Copyright statement
is the registered trademark of Shenzhen TP-LINK Technologies Co., Ltd. All rights reserved, contents may be revised without prior notice. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Shenzhen TP-LINK Technologies Co., Ltd. See our web site for more details: http://www.tp-link.com.

Table of contents

Checklist....1 Chapter 1 1.1 1.2 1.3 About this User's Guide...1
Usage...1 Assumpsit...1 Overview of this User's Guide...2 Introduction...2

Chapter 2 2.1 2.2

Overview of the product..2 Features and specification...3
2.2.1 Features...3 2.2.2 Specification...4 Chapter 3 3.1 Installation..5

Installation...5

3.1.1 Desktop or Shelf Installation..5 3.1.2 Rack Installation...5 3.1.3 Power On...6 3.2 Connecting the Switch...7
3.2.1 Front Panel....7 3.2.2 Rear Panel....8 3.2.3 Optional Extension Modules..9 3.3 Remarks...10 TELNET/Out-of-Band Management.11

Chapter 4 4.1

Introduction...11

4.2 4.3 4.4

How to connect TELNET...12 How to connect Out-of-Band...13 The interface and operating way of TELNET/Out-of-Band.14
4.4.1 Configure System...17 4.4.2 Port Management...20 4.4.3 Network...24 4.4.4 Spanning Tree protocol...25 4.4.5 IEEE802.1X protocol...26 4.4.6 VLAN Management..27 4.4.7 Configure Trunk...28 Chapter 5 5.1 5.2 WEB Management..29
Introduction...29 Connection of WEB Management..29 RJ-45 Plug/Connector Pin Specification..34 Default Configuration of the switch..36

Annex A Annex B

24+2G Gigabit Managed Switch User's Guide

Checklist

Open the box and carefully unpack the TL-SL3226P. You should have all the items on the following checklist: ! ! ! ! ! One TL-SL3226P Switch One AC power cable One Serial cable One User's Guide (CD or Presswork) Two mounting brackets and screws
1.3 Overview of this User's Guide
Chapter 1 Chapter 2 Chapter 3 About this User's Guide Introduction. Describes the switch and its features Installation. Helps you to get started with the basic installation of the switch Chapter4 TELNET/Out-of-Band Management.Describes how to manage the switch through TELNET/Out-of-Band Management Chapter 5 Annex A Annex B WEB Management RJ-45 Plug/Connector Pin Specification Default Configuration of the switch
If any item is missing, contact the retailer where you purchased the TLSL3226P for assistant.
Chapter 2 Chapter 1 About this User's Guide
Thank you for purchasing TL-SL3226P 24+2G Gigabit Managed Switch. The TL-SL3226P provide powerful management functions. With the features of high-performance, easy-to use and economic, the TL-SL3226P is the ideal choice for you.

Introduction

2.1 Overview of the product
TL-SL3226P switch fully complies with IEEE802.3 Ethernet standard, its standard 19-inch size and intelligent management make it suitable for small, middle and large networks. TL-SL3226P switch provides powerful management functions, including the system, port, network, Spanning Tree protocol, IEEE802.1X protocol, VLAN,

1.1 Usage

This User's Guide tells you how to use your TL-SL3226P.
Trunk, IGMP Snooping, SNMP protocol, priority and security etc. TL-SL3226P switch provides multiple management method: SNMP, Web,

1.2 Assumpsit

The TL-SL3226P indicated in this User's Guide is the TL-SL3226P 24+2G Gigabit Managed Switch.
Telnet and Console (RS232). TL-SL3226P switch provides two independent extension slots, which support 100/1000M module card and GBIC. This modular structure protects user investment and makes the switch more versatile.
Features and Specification
Fully comply with IEEE802.3 standard Full and half-duplex for both 10Mbps and 100Mbps connections. Support IEEE802.3x flow control for full-duplex mode and collisionbased backpressure for half-duplex mode

Dimension Environment

Chapter 3

Installation

3.1 Installation
Follow these steps to install the switch: ! ! ! ! The surface must support at least 5kg The power source must be within 1.5m

Slot 1 Slot 2

Link Act

Link/Act

Check the power cable to make sure the connection to AC power Leave enough space for the ventilation

10/100M FDX/Col

Console

24+2G Gigabit

Managed Switch
3.1.1 Desktop or Shelf Installation
1. 2. 3. Put the TL-SL3226P on the big and stable desktop, bottom up. Attach the cushioning feet on the bottom at each corner of the device. Upturn the device, put it on the desktop.
Figure 3-1 Rack Installation

3.1.2 Rack Installation

The TL-SL3226P can be mounted in an EIA standard size 19 inch rack. 1. Attach a mounting bracket to each side of the TL-SL3226P with the screws provided. 2. 3. Sl ide the TL-SF3226P into the Rack. U se the screws to secure the TL-SL3226P to the Rack.

3.1.3 Power On

The TL-SL3226P can be used with the power source in the range of 110 to 260VAC, 50 to 60Hz. The internal power system of the TL-SL3226P can automatically adjust the operating power-pressure according to the power-pressure input. The POWER LED will be light when power on.

Caution:

As a precaution in the event of a power failure, unplug the switch. When the power resumed, plug the switch back in.

Connecting the Switch

connection port with PC when Out-of-Band management.

3.2.1 Front Panel

There are 2 extension module slots, 24 10/100Mbps ports, one console (RS232) port and LED indicators on the front panel of the TL-SL3226P.

Slot 1

Power LED
Located between the console port and 24 normal ports, the power LED will be always green when power on. Or else, please check the power

Slot 2

connection.

10/100M

FDX/Col
Figure 3-2 Front Panel of the TL-SL3226P

100Mbps LED (Speed LED)

When a normal port connects to 100Mbps equipment, the responding LED is !

Module Slot

orange. An unlit LED indicates a connection speed of 10Mbps.
The module slots can connect 100M/1000M module card and GBIC card. ! !
Link/Act (Connection LED)
24 10Base-T/100Base-TX RJ-45 ports
The LEDs are lit when there is a secure connection to a device at any of the ports. The flash LED indicates data transmission at the responding port.
All ports can auto-negotiate between 10Mbps or 100Mbps and full or halfduplex. You can configure the speed, duplex mode, flow control, broadcast storm control and security control through kinds of manage-ment way such as SNMP, Web, Telnet or Out-of-Band management.

There is one LED on each side of every port. Link/Act LED on the left is green. 100Mbps LED on the right is orange.

Rear Panel

The rear panel of the TL-SL3226P contains a power connector and a port for ground connection.

110-260V ~ 50-60Hz 0.6A

Figure 3-3 one port of the TL-SL3226P
Figure 3-4 the Rear Panel of the TL-SL3226P !

Console port

Power connector
The Console port or RS232 port on the right of the front panel is the
The AC power connector is a standard three-pronged connector that
supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltage range from 110 to 260VAC at 50-60Hz. !
Model No. TL-SM201U TL-SM201CM
Standard 100Base-TX 100Base-FX
Interface Network Media RJ-45 SC SC SC SC Cat 5 UTP/STP 50/125 um MMF 62.5/125 um MMF
Maximum Transfer Distance 100m 2000m 20000m 40000m 60000m
The port for connection to the ground
TL-SM201CS-20 100Base-FX TL-SM201CS-40 100Base-FX TL-SM201CS-60 100Base-FX
There is a port on the left of the panel for the connection to the ground.
9/125 um SMF 9/125 um SMF 9/125 um SMF
3.2.3 Optional Extension Modules
There are two module extension slots on the front panel of the TL-SL3226P as the following figure.

1000M 100M

TL-SM301 Gigabit series module
Model No. TL-SM301U Standard 1000Base-T 1000Base-SX 1000Base-LX Interface RJ-45 SC SC Network Media Cat 5 UTP 50/125 um MMF 62.5/125 um MMF TL-SM301CS 9/125 um SMF 550m 10000m Maximum Transfer Distance 100m TL-SM301CM
10/100M 10M FDX/Col FDX/Col
Figure 3-5 Module of the TL-SL3226P When you install any of the modules, you must turn off the power at first. After you take out the board on the slot, put the module into the extension slot. The TL-SL3226P can auto-identify the module and configure automatically. The TL-SL3226P can use with TL-SM201 100M series modules, TL-SM301 Gigabit series modules and TL-SM301GB GBIC cards.
The extension slots with UTP module can support auto-negotiation and auto MDI/MDIX. These two slots are independent, never conflicting with other
TL-SM201 100M Series Module

normal ports.

Remarks
Pay attention to the stability when you put the TL-SL3226P. It's serious if the TL-SL3226P drops.
The TL-SL3226P can start to work with the correct power supply. Please confirm whether the power supply is accordant to the requirements of the TL-SL3226P.
Out-of-Band Management manages the Switch locally through the console port, without occupying the bandwidth. Though TELNET and Out-of-Band have different presentation, their management contents are same. Both of them are to configure the Switch's characters.
In order to avoid the risk of the power-attach, don't open the shelf of the TL-SL3226P when it works. Don't open the shelf even without power.

When the TL-SL3226P is connecting with the working stop, server, hub or other switches, the network cord must be less than 100m if the network cord is UTP.

How to connect TELNET

Connect the management workstation to the management port on the Switch. You can directly use TELNET commend on the commend DOS prompt in the Windows Attachment. The parameter following the TELNET commend is the IP address of the Switch which can be revised to adapt to the network. However, when you reuse TELNET to access, the parameter will be the Switch's IP address newly set. There is limit to the users accessing times through TELNET, maximum 3 times. There is also time limit for the connection. The connection will be automatically broken if there is no operation in a limit time. Furthermore, maximum 5 users can access to the Switch through TELNET at one time.
You must use Cat 3 or above UTP for 10Base-T Ethernet. You must use Cat 5 UTP for 100Base-TX Ethernet. The module decides the operating speed of the extension slot. The 100M Module can work in 100M situations, while the 1000M modules can work in 1000M networks.
When the TL-SL3226P is working, the network cord can be put into the port or put out from the port randomly, without breaking the operating of the TL-SL3226P.
Before clean the TL-SL3226P, please unplug the power adapter. Don't clean with liquid.
Don't put the TL-SL3226P near water or humidity; avoid water or humidity air into the shelf.
Avoid the dust and strong electromagnetism.

Chapter 4

TELNET/Out-of-Band Management

Remark:

Only the PC connecting to the management port can configure the Switch through TELNET or WEB.
Through TELNET you can realize Remote Log in to manage the Switch.
How to connect Out-of-Band
HyperTerminal Private Edition. The configuration way is similar with that on Windows.
Out-of-Band Management needs a terminal or a HyperTerminal. First, connect the Switch's console port with the PC's console port by the console cord. Then, run HyperTerminal. Refer to the following figure to configure the HyperTerminal.
4.4 The interface and operating way of TELNET/Outof-Band

Illumination:

System Configuration includes system information such as software/hardware version, module information, switch parameter such as broadcast storm filter mode, file transmission, save and reset. Ports Management includes port parameter (open/close flow control, port default VID, port security), port mirror (two types: direction mode mirror and flow mode mirror), port description (use character string to describe ports), port statistic (the statistic information of tag forwarding, receiving and conflicting), port situation (connection situation, port speed, duplex mode) and port bandwidth (entrance bandwidth and exit bandwidth). Network includes address parameter (the Ethernet address of the Switch, IP address, NetMask, Gateway, etc), maximum aging time, Dynamic address
The assumpsit of normal control button in the operating interface is as following: <Arrow Key>= Direction Button: up, down, left, right moves cursor <Tab> =T Button: move the cursor to the next stay place ab <W>, <w> = W, w Button: move the cursor up <S>, <s> = S, s Button: move the cursor down <A>, <a> = S, s Button: move the cursor left <D>, <d> = D, d Button: move the cursor right <Esc> = Esc Button: exit the current menu <Enter> = Enter Button: enter the next sub-directory or active the revision <Space> = Space Button: switch the choice <Backspace> = Backspace Button: delete one letter <^U> = press U button after press Ctrl button (Ctrl + U): active the revision data <^A> = press A button after press Ctrl button (Ctrl + A): choose all letter where the cursor locates ! 1) ! Figure 4-3 System Configuration
Remarks: System Information
When you configure System Information, only System Name, System Contact and System Location can be changed. Others of System Information are only for read.

Module Information

If yo u use modules, you can configure the responding module slot. Slot 1 Port 25 Slot 2 Port 26
The revised configuration won't be effect without activation. The effect configuration is effective before the next startup. In order to effect the configuration after next startup, you need to enter into the SAVE and RESET menu of System configuration menu to save the configuration.
2) If you install modules, the module information will be showed according to the specific modules. 100M UTP module: 100BASE-TX 100M Fiber module: 100BASE-FX
4.4.1 System Configuration
Gig abit UTP module: 1000BASE-T Gig abit Fiber module: 1000BASE-LX/SX

Switch Parameters

2) When downloading TFTP, TFTP server must have the files for updating. 3) 4) You must guarantee the TFTP server in operating. To break the download is not allowed during the TFTP download. Or else the Switch may be out of the way.
Assigned Managed Port: can be any port or all ports from P1 to P26. Only the workstation connecting to the Assigned Managed Port in the Switch can manage the Switch. The default is All ports.
Broadcast Strom Filtering Mode: have six choices: 5%, 10%, 15%, 20%, and 25%. !

Save Reset

The configuration of parameters won't be effect until you activate the changes. When you press Ctrl + U, the Switch will list you want to activate the changes (Y/N)? cancel. Are you sure
When you reset to factory situation, all parameters except IP address can be configured to factory configuration.
. Y for confirmation, N for

4.4.2 Port Management

File Transfer
Transfer types are Update System, Backup Switch Config and Updata Switch Config.
Updata Switch System: Through the program files using by TFTP server to update the Switch, download the program files provided by TFTP server into the Switch to realize the software update. Backup Switch Config: Upload the configuration files of the Switch to TFTP server to store the configuration parameters of the Switch.
Figure 4-4 Port Management

Ports parameters:

In the IEEE802.1Q Tag VLAN mode, there are two pages of port parameters as figure 4-3 and figure 4-4. In the figure 4-3, when the cursor is on the Speed/Duplex, the interface as figure 4-4 will exist when you move the cursor right. In the Port VLAN mode or VLAN Disable mode, there is only one page of port
Updata Switch Config: download the configuration files for the Switch from TFTP server to update the Switch configuration.
parameters as figure 4-5. The Port Security of Port 2 in the above figure is not configurable because

10FD: 10Mbps, Full-Duplex
the IEEE802.1X protocol of Port 2 has been configured to be Enable. Please note Port Security, Trunk and IEEE802.1X protocol are mutually exclusive. In other word, when you configure one of them, other two can't be configured.
100HD: 100Mbps, Half-Duplex 100FD: 100Mbps, Full-Duplex
The port can be used when the State is Enable, while the port is prohibited when the State is Disable. The Switch will discard the packets from the port.
Two independent modules The operating mode of two independent modules is different according to different module.

Port Security

There are four types of the modules: 1) 100M fiber module (such as TL-SM201 series) Auto: auto-negotiation 100FD: 100Mbps, Full-Duplex
When you configure the Port Security of a port to be Enable, the port won't learn any new MAC address. Furthermore, the port only transfers the Data Tag accordant to requirements. Other Tags will be discarded. When the Port Security of a port is Disable, the port will automatically learn any new MAC address and transfer Tags received.
100M Twisted-Pair module (such as TL-SM201U) Auto: auto-negotiation

Flow Control

10HD: 10Mbps, Half-Duplex 10FD: 10Mbps, Full-Duplex 100HD: 100Mbps, Half-Duplex 100FD: 100Mbps, Full-Duplex
Disable (default): The port won't produce Flow Control packets and will discard the Flow Control packets received. Enabled: The Switch will negotiate Flow Control on the specified port 3) !
according to Full-Duplex or Half-Duplex. Gigabit Fiber Module (such as TL-SM301CS) Auto: auto-negotiation 1000FD: 1000Mbps, Full-Duplex

Speed/Duplex

10Base-T/100Base-TX ports Auto (default): auto-test the speed and negotiate the duplex mode with the other end. 10HD: 10Mbps, Half-Duplex 4)
Gigabit Twisted-Pair module (such as TL-SM301U) Auto: auto-negotiation
10HD: 10Mbps, Half-Duplex 10FD: 10Mbps, Full-Duplex 100HD: 100Mbps, Half-Duplex 100FD: 100Mbps, Full-Duplex 1000HD: 1000Mbps, Half-Duplex 1000FD: 1000Mbps, Full-Duplex

be a sniffer port. The Sniffer port should in a same VLAN with the mirrored port.
Direction-Centric Mode Sniffer
Sniffer Port: can choose any port from port 1 to port 26. but it can't included in the mirrored port. Port 25 and Port 26 can't be used if there are no modules inside.

Default VID

There is this choice only in the IEEE802.1Q Tag VLAN mode. Every port on the Switch has a Default VID which is the VID for an Untag Tag received by the port.

Network

Drop Untag Frm
One of the input regulations of the Switch. When you configure it to be Enable, the Switch will discard the Untag Tags.

Drop Nonmbr Frm Remarks

Figure 4-5 Network
One of the input regulations of the Switch. When you configure it to be Enable, the Switch will discard Unmember Tags.

Max Aging Time:

Port Sniffer
There are two modes of Port Sniffer, Direction-Centric Mode Sniffer and Flow-Centric Mode Sniffer. Please note these two modes can't be Enable at the same time. When you use one of two modes, you can't use another. The Trunk member port can't
Dynamic forwarding table entries, which aremade up of the source and destination MAC addresses and their associated port numbers, are deleted from the table if they are not accessed within the aging time. The aging time can be from 300 to 765 seconds. A very long aging time can result in dynamic forwarding table entries that are out-of-date or no longer exist. This may cause incorrect packet forwarding decisions by the Switch. If the Aging Time
Priority: 0 - 65535 Hello Time: 1 - 10
is too short however, many entries may be aged out too soon. This will result in a high percentage of received packets whose source addresses cannot be found in the forwarding table, in which case the switch will broadcast the packet to all ports, egating many of the benefits of having a switch. Static forwarding entries are not affected by the aging time.
Maximum Age Timer: 6- 40 Forward Delay Timer: 4 - 30

Max. Age Max. Age

2 x (Forward Delay - 1 second) 2 x (Hello Time + 1 second)
Static MAC Address If you set the wrong port of the address or change the port during operation, you must reset the Static MAC Address Table. Or else the address can't be used. 2) When the Spanning Tree changes from Disable to Enable, the port will be blocked for a while which is two times of the Forward Delay. After revision, you must TELNET the Switch again. 3) There are limits to the Port Priority and Port Cost. Port Priority: (can configure 1 and 255) Port Cost: (can configure 1 and 65535)

After you configure the Static MAC Address the Switch can't operate normally if a equipment with this address connects to the other port of the Switch. It's better to delete the static address which won't be used when you configure the static MAC address.
4.4.4 Spanning Tree protocol
4.4.5 IEEE802.1X protocol
Figure 4-6 Spanning Tree protocol Remarks: 1) There are limits as following: 1) Figure 4-7 IEEE802.1X protocol Remarks: The following MAC address can't be set into the Force AUTH MAC
Table. ! ! ! ! Static MAC Address Filter MAC Address
When you configure the MTU VLAN and effect it, all original VLAN and Trunk configuration will be cancelled.
Force UNAUTH MAC Address Authorized MAC Address

Configure Trunk

No matter which port the MAC Address of the Force UNAUTH MAC Table relates to, the Switch won't transfer its' packets. The following MAC address can't be set into the Force UNAUTH MAC Table:

! ! ! !

Static MAC Address Filter MAC Address Force UNAUTH MAC Address Authorized MAC Address
Figure 4-9 Configure Trunk (Page 1 of 2)

4.4.6 VLAN Management

Figure 4-10 Configure Trunk (Page 2 of 2)

Remarks:

1) ! Figure 4-8 VLAN Management Trunk Configuration Regulation: The Switch supports 7 Trunk. 24 normal ports can only form Trunk with the normal ports. Two modules with same model can form a Trunk. But the module slot can't form Trunk with the normal ports. There must be
1) When the VLAN mode has been changed, the Switch will reboot automatically. !
from 2 to 4 ports to be a Trunk. The Trunk will be treated as a logistic port after you set a Trunk.
When you configure a Trunk, the ports added to the Trunk will be deleted from all VLANs no matter whether you create a Trunk or add the port to a Trunk. If you delete any port or delete the whole Trunk, the original port in the Trunk can't reset to any VLAN. In the begging of creating a Trunk, the Trunk is not along to any VLAN. You must configure it to the required VLAN according to the requirements.
Before getting start, you must finish some preparing steps. We choose IE 5.0 in Windows 2000 to be an example.
The First Step: Tool in the IE menu Internet options the following screen

Chapter 5

WEB Management

5.1 Introduction

The TL-SL3226P offers an embedded Web-based (HTML) server allowing users to manage the Switch from anywhere on the network through a standard browser, such as Microsoft Internet Explorer. The Web-based management module and the Console program (and Telnet) are different ways to access the same internal switching software and configure it. Thus, all settings encountered in Web-based management are the same as those found in the console program.

Figure 5-1 Internet Options
Connection of WEB Management
The Second Step: Press Settings to the following screen:

5.2.1 Getting Start

The first step in getting started in using Web-based management for your Switch is to secure a browser such as Microsoft Internet Explorer (Simply called IE). Furthermore, the browser must support Javascript Script. For the best effect, we suggest you to use IE5.0 or above version and 800x600 or above system.

The Forth Step:

Choose Enable in the Active Scripting or choose Reset to press Reset and press OK.

Medium,

Figure 5-2 Settings
Please choose Automatically, then press OK.
The Third step: Choose Security User-defined.
Figure 5-4 Security Settings
The Fifth step: Press the right button of the mouse, choose Propertiesin the menu existed. The following screen will exist.
Choose Settings, set 800x600, press Apply or OK

Figure 5-3 Security

Input the user's name and password (the default user's name and password are supervisor. Furthermore, the default user has managing right.) Press OK to the page of WEB management.
The default user's name and password are set in factory. You can revise and add user's names and passwords in the Security Configuration. You must have management right when you revising such configuration. If you reset the Switch to factory configuration, all users' names and passwords set before will disappear. There is only default user's name and password. Like TELNET, WEB has two managing rights, Manager's right and user's right.

Figure 5-5

Connection
Annex A RJ-45 Plug/Connector Pin Specification
When connecting the Switch to another switch, a bridge or a hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagram and table show the standard RJ-45 receptacle/connector and their pin assignments for the switch-to-network adapter card connection, and the normal cable for the Switch-to switch/hub/bridge connection.
We propose the IP address of the Switch is 192.168.0.2, you can input http://192.168.0.2/ in the IE to connect the Switch. Then press Enter, the following screen will exist.

1234567

Figure 5-6
Figure A-1. The standard RJ-45 receptacle/connector

RJ-45 Connector pin assignment

Connector pin assignment

Contact MDI-II Signal TX+ (transmit) TX- (transmit) RX+ (receive) Not used Not used RX- (receive) Not used Not used MDI-X Signal RX+ (receive) RX- (receive) TX+ (transmit) Not used Not used TX- (transmit) Not used Not used

Cross Cable

The Switch (normal port) connects to the switch/hub/other equipments (normal port).
1 RX+ 2 RX3 TX+ 6 TXRX+ 1 RX- 2 TX+ 3 TX- 6

Figure A-4 Cross Cable

Usually, the Straight Cable is required to connect to the switch (Uplink Port) or NIC.
Table A-1. The standard Category 3 cable, RJ-45 pin assignment
The following Figure shows the facture of the Straight Cable and the Cross Cable.

Annex B

Default Configuration of the switch
System Information System Name System Position Contact Assigned Managed Port Broadcast Storm Filtering Mode Transfers Type File Name TFTP Server State Port Security Flow Control Speed/Duplex Drop Untag Frm Drop NonMbr Frm Default VID TL-SL3226PVXX New Location Administrator All Ports OFF Update System File sl3226p.bin 0.0.0.0 Enable Disable Enable Auto Disable Disable 1

System Configuration

Straight Cable
The Switch (Uplink port) or NIC connects to the switch/hub/other equipments (normal ports).

File transfer

1 TX+ 2 TX3 RX+ 6 RXRX+ 1 RX- 2 TX+ 3 TX- 6

Switch Parameter

Ports Management

Port Parameters

MDI-II
Figure A-3 Straight Cable
Direction-centric Mode Sniffer Flow-centric Mode Sniffer
Port Description Port Statistics Port BandWidth Network IP Address Parameters

Spanning Tree

MAC Address table Max Age Static MAC Address Table Filter MAC Address Switch Configuration
Sniffer Direction Sniffer Port Monitored Port Mask State Sniffer Port Destination Port Source Port N/A 0 Ingress Control Engress Control DHCP IP Address Subnet Mask Default Gateway Max Age N/A N/A Spanning Tree Bridge Priority Bridge Hello Time Bridge Hello Age Forward Delay Priority Path Cost 802.1x State Authentication Method Auth Server IP Backup Auth Server IP Auth Server Port Auth Server Key Acct Server IP Backup Acct Server IP Acct Server Port Acct Server Key Re-Auth Enable Re-Auth Period (s)

Disable 1 N/A Disable 1

IEEE802.1x Protocol Port Configuration

VLAN Management

Trunk Configuration IGMP Snooping
VLAN Mode Configuration VLAN Configuration No Trunk IGMP Snooping set Agent status Community
State Force AUTH MAC Table Force UNAUTH MAC Table IEEE802.1q Tag VLAN
Disable (all ports) N/A N/A
All ports are in one VLAN whose VID is 1, Untag

IGMP Snooping State

Disable Enable Public Read/Write
Disable Disable Disable 192.168.0.1 255.255.255.0 0.0.0.0 300
IGMP Snooping Age Time 120

SNMP Protocol

Priority
Port Configuration IEEE802.1x Protocol Switch Configuration
Disable 128 (all ports) 19 (all ports) Disable PAP Authentication 0.0.0.0 0.0.0.N/A 0.0.0.0 0.0.0.N/A Disable 3600

Security

SNMP Agent Status Community Name Access Mode Host N/A Trap N/A Event None (all items) Port Priority Priority Mode Priority Class Mapping Priority Class Mapping Table Priority Config High Priority Class Weight Low Priority Class Weight Delay Bound Mode Low Priority Delay Bound Control Low Priority Delay Bound Time Security Configuration User Name Password User Type State
802.1p (all ports) Low OFF Disable 0 Supervisor Supervisor Admin Enable

Networking Your World

www.tp-link.com

Wireless LAN

108M Wireless LAN (Super GTM & eXtended RangeTM) 108M 802.11a/b/g Wireless Adapter (Super AGTM & eXtended RangeTM) 54M Wireless LAN (eXtended RangeTM) 54M 802.11a/b/g Wireless Adapter (eXtended RangeTM) 54M Wireless LAN
108M / 54M Wireless ADSL2+ Router ADSL2+ Modem ADSL2+ Router

Router

Firewall Router Load Balance Broadband Router Enterprise Broadband Router Cable/DSL Router

Switch

TP-LINK TECHNOLOGIES CO., LTD.
Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. Copyright 2007 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.

83925027_71007

E-mail: sales@tp-link.com (for distributor), oem@tp-link.com (for oem) Website: http://www.tp-link.com
Managed Gigabit Switch Web Smart Gigabit Switch Remote Smart Switch Unmanaged Switch

Media Converter

WDM Fiber Bridge WDM Media Converter Fast Ethernet Media Converter

Network Adapter

Product Purchasing Guide

Mar. 2007

Research & Development

Laboratory

Factory

Production Line

108M Wireless LAN (Super GTM & eXtended RangeTM ) 108M 802.11a/b/g Wireless Adapter (Super AGTM & eXtended RangeTM ) 54M Wireless LAN (eXtended Range )

Company profile

TP-LINK is the No.1 market share holder and the biggest manufacturer of home and small/medium business networking products in China. With 14 sales branches and more than 600 distributors in China, TP-LINK can sell more than 15 million products annually. A number of our products take more than 50% market share in China. We are now expanding our business to the global market, striving for a larger percent of the world market 108M / 54M Wireless ADSL2+ Router ADSL2+ Modem ADSL2+ Router Since we developed our first LAN card in 1996, we now have more than 100 experienced software and hardware R&D engineers and a well-equipped laboratory. With our powerful R&D abilities, we Firewall Router Load Balance Broadband Router Enterprise Broadband Router Cable / DSL Router We have 2 our own factories near our head office. With 21 SMT production lines and a large number of QC testing equipment, TP-LINK can produce about 20 million product units annually under Managed Gigabit Switch Web Smart Gigabit Switch Remote Smart Switch Unmanaged Switch Our strong R&D, efficient manufacturing, and strict quality management guarantee the performance and quality of TP-LINK products. Based on the confidence of tens of millions of customers, TP-LINK has become a leading enterprise as a result of combining the advantages of R&D, manufacturing and sales. the effective quality management system ISO9001. We also have the ability to produce customized products for OEM customers. continue to introduce many new kinds of products winning awards from public media and evaluation organizations annually. share.
54M 802.11a/b/g Wireless Adapter (eXtended RangeTM ) 54M Wireless LAN Wireless Antenna
Media Converter Network Adapter

108M Wireless LAN

108M Wireless Router

TL-WR641G / TL-WR642G

(Super G & eXtended Range)

Product Description:

Faster and Farther - The TP-LINK 108M Wireless Router brings you Super G and eXtended Range technologies. By using Super G technology, your wireless data transfer rate can reach the utmost of 108Mbps. Moreover, eXtended Range provides you 2 to 3 times transmission distance of a normal 802.11g product. Playing an important role of wireless LAN, a robust wireless data security function is a must. The TP-LINK 108M Wireless Router provides WPA/WPA2 as well as WEP encryption, making your data safer than ever.

TL-WR641G

TL-WR642G

Features:

Complies with IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u standards. 1 10/100M Auto-Negotiation RJ45 WAN port, 4 10/100M Auto-Negotiation RJ45 LAN ports, supports Auto MDI/MDIX. Adopts 2x to 3x eXtended Range and Super G technology. Supports 108/54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps data transfer rates. Provides WPA/WPA2 and 64/128/152-bit WEP encryption security. Shares data and Internet access for users, supports PPPoE, Dynamic IP, Static IP, L2TP, PPTP, Big Pond Cable Internet access. Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through. Detachable Antenna (reverse SMA connector) (only for TL-WR642G). Built-in Firewall, NAT and DHCP server. TL-WR641G Supports access control, parents and network administrators can establish time-based access policies for children or staff. Provides WLAN ACL (Access Control List). Supports configuration backup/restore and firmware upgrade.

TP-LINK Wireless Router provides you a pretty beautiful new housing, and is able to make you enjoy your everyday life wirelessly almost anywhere of your house! eXtended Range technology, 2X to 3X transmission distance of standard 11g/b Super G technology, data rate is up to 108Mbps
Model No. TL-WR641G TL-WR642G
Wireless Data Transfer Rate
up to 108Mbps up to 108Mbps
1 WAN + 4 LAN 1 WAN + 4 LAN

108M Super G

eXtended Range

Antenna

Fixed Detachable

108M Wireless Adapter

(Super G & eXtended Range )
TL-WN610G / TL-WN620G / TL-WN650G /TL-WN651G / TL-WN660G
108M 802.11a/b/g Wireless Adapter
(Super AG & eXtended Range)
TL-WN612AG / TL-WN653AG / TL-WN662AG
Enjoy your everyday life wirelessly at almost anywhere of your house! Benefiting from Super G and eXtended Range wireless LAN technologies, wireless data transfer rate could reach the utmost of 108Mbps, transmission distance of wireless signal is 2 to 3 times farther. Imagine chatting with on-line friends while sitting at the patio, enjoying movies on the lawn in your yard. What a wonderful experience! Varieties encryptions such as WPA/WPA2 as well as WEP ensure you the safety of your personal data, no worry at all!
Enjoy your everyday life wirelessly at almost anywhere of your house! Benefiting from Super AG and eXtended Range technologies, wireless data transfer rate of TP-LINKs Dual-band, Tri-mode Wireless Adapter could reach the utmost of 108Mbps; the transmission distance of wireless signal is 2 to 3 times farther. Imagine chatting with on-line friends while sitting at the patio, enjoying movies on the lawn in your yard. What a wonderful experience! No needs to worry about the safety of your personal data, since robust data security functions such as WPA/WPA2 and WEP are included.
Complies with IEEE 802.11g, IEEE 802.11b and IEEE 802.11a standards. Adopts Super AG technology, data transfer rate Auto-Negotiation, up to 108Mbps. Adopts eXtended Range technology, the transmission distance is TL-WN650G TL-WN651G 2-3 times of normal 11b and 11g products, the transmission range is extended to 4-9 times. Provides WPA/WPA2 and 64/128/152-bit WEP encryption security. 32-bit CardBus/PCI/Mini PCI interface. Supports Ad-Hoc/Infrastructure modes. Supports Wireless Roaming, can move among different APs without breaking the current connection. Supports Windows 98SE/ME/2000/XP. TL-WN620G TL-WN653AG

Complies with IEEE 802.11g, IEEE 802.11b. Adopts Super G technology, data transfer rate Auto-Negotiation, up to 108Mbps. Adopts eXtended Range technology, the transmission distance is 2-3 times of normal 11b and 11g products, the transmission range is extended to 4-9 times. Provides WPA/WPA2 and 64/128/152-bit WEP encryption security. 32-bit CardBus/USB/PCI/Mini PCI interface. Supports Ad-Hoc/Infrastructure modes. Supports Wireless Roaming, can move among different APs without breaking the current connection. Supports Windows 98SE/ME/2000/XP.

TL-WN610G

TL-WN660G

TL-WN612AG

TL-WN662AG
Model No. TL-WN610G TL-WN620G TL-WN650G TL-WN651G TL-WN660G
up to 108Mbps up to 108Mbps up to 108Mbps up to 108Mbps up to 108Mbps

Interface

32-bit CardBus USB 2.0 32-bit PCI 32-bit PCI Mini PCI
Internal Internal Fixed Detachable /
Model No. TL-WN612AG TL-WN653AG TL-WN662AG
up to 108Mbps up to 108Mbps up to 108Mbps
32-bit CardBus 32-bit PCI Mini PCI

108M Super AG

Internal Detachable /

54M Wireless LAN

54M Wireless Router

TL-WR541G / TL-WR542G

(eXtended Range)
54M Wireless AP Client Router

TL-WR543G

54M Wireless Access Point

TL-WA501G

Faster and Farther - Wireless data transfer rate can reach the utmost of 54Mbps. Moreover, eXtended Range provides you 2 to 3 times the transmission distance of a normal 802.11g product. The TP-LINK 54M Wireless Router provides WPA/WPA2 as well as WEP encryption, making your data safer than ever. Multiple Internet access modes and abundant functions bring you a comfortable and joyful Internet-surfing experience with the TP-LINK 54M Wireless Router.
Faster and Farther - Wireless data transfer rate can reach the utmost of 54Mbps. Moreover, eXtended Range provides you 2 to 3 times the transmission distance of a normal 802.11g product. The TP-LINK 54M Wireless AP Client Router provides WPA/WPA2 as well as WEP encryption, making your data safer than ever. Multiple Internet access modes and abundant functions bring you a comfortable and joyful Internet-surfing experience with the TP-LINK 54M Wireless AP Client Router.
The TP-LINK TL-WA501G is a multi-mode Access Point. Its very useful if you have the demand of expanding your network. You can make it work as an AP, an AP Client, an AP Repeater or just a Bridge. Robust security functions such as WPA/WPA2 and 64/128/152-bit encryption are provided, thus your data security is ensured. Being fully compliant with IEEE 802.11g/b make it work well with other 802.11g/b compatible products. The wireless data transfer rate can be as fast as up to 54Mbps utmost. Additionally, TL-WA501G provides a reverse SMA detachable antenna. It is convenient to change a higher gain antenna to achieve farther transmission distance.

Detachable

TL-WR543G TL-WA501G

54M Wireless Adapter

TL-WN510G / TL-WN550G / TL-WN551G / TL-WN560G
54M 802.11a/b/g Wireless Adapter
TL-WN512AG / TL-WN553AG / TL-WN562AG

TL-WN322G / TL-WN321G

The TP-LINK 54M Wireless Adapter is an easy-to-use product that provides you friendly user interface. Through the use of eXtended Range technology, the transmission distance of your wireless network becomes 2 to 3 times farther, which means 4 to 9 times the coverage of a normal 802.11g product. The wireless data transfer rate can reach the utmost of 54Mbps. Playing an important role of wireless LAN, robust data security function is a must. The TP-LINK 54M Wireless Adapter provides WPA/WPA2 as well as 64/128/152-bit WEP encryption, making your data safer than ever.
Enjoy your everyday life wirelessly at almost anywhere of your house! The wireless data transfer rate of TP-LINKs Dual-band, Tri-mode 54M Wireless Adapter could reach the utmost of 54Mbps. Benefiting from eXtended Range technology, the transmission distance of wireless signal is 2 to 3 times farther. Imagine chatting with on-line friends while sitting at the patio, enjoying movies on the lawn in your yard. What a wonderful experience! No need to worry about the safety of your personal data, since robust data security, such as WPA/WPA2 as well as WEP encryption, is included. Easy-to-use utility and friendly user interface enable you to set up your wireless network in no time.
The TP-LINK 54M Wireless Adapter is an easy-to-use product that provides you friendly user interface. The wireless data transfer rate can reach the utmost of 54Mbps. Playing an important role of wireless LAN, robust data security function is a must. The TP-LINK 54M Wireless Adapter provides WPA/WPA2 as well as 64/128/152-bit WEP encryption, making your data safer than ever. Additionally, TL-WN322G is able to work with Sonys PSP player, bringing much joy to your wireless game experience.
Complies with IEEE 802.11g, IEEE 802.11b. Supports WPA/WPA2 encryption security. 64/128-bit WEP Encryption for TL-WN321G, 64/128/256-bit WEP encryption for TL-WN322G. Provides AP Client Mode, Supports PSP Connection (only for TL-WN322G). Data transfer rate Auto-Negotiation, up to 54Mbps. USB interface. Supports Ad-Hoc/Infrastructure modes. Supports Wireless Roaming, can move among different AP without breaking the current connection. Supports Windows 98SE/ME/2000/XP/Vista (Windows Vista driver only for TL-WN322G).

TL-WN321G

TL-WN322G
Complies with IEEE 802.11g, IEEE 802.11b standards. Adopts eXtended Range technology, the transmission distance is 2-3 times of normal 11b and 11g products, the transmission range is extended to 4-9 times. Provides WPA/WPA2 and 64/128/152-bit WEP encryption security. Data transfer rate Auto-Negotiation, up to 54Mbps. 32-bit CardBus/PCI/Mini PCI interface. Supports Ad-Hoc/Infrastructure modes. Supports Wireless Roaming, can move among different APs without breaking the current connection. Supports Windows 98SE/ME/2000/XP.

TD-W8910G

Model No. TD-W8920G TD-W8910G
1 RJ11 + 4 RJRJ11 + 4 RJ45
up to 108Mbps up to 54Mbps

108M Super GTM

eXtended RangeTM
Wireless + ADSL2 + + Router, all wrapped in TP-LINK 108M/54M Wireless ADSL2+ Router. An ideal 3 in 1 product that offers you a clutter-free desktop as well as easy management.
Wireless Router with built-in ADSL2+ Modem eXtended Range technology, 2X to 3X transmission distance of standard 11g/b Super G technology, data rate is up to 108Mbps Broadcom ADSL2+ and Atheros Wireless solution

ADSL2+ Modem

TD-8610
1 10/100Mbps Auto-Negotiation RJ45 port supports Auto MDI/MDIX, 1 RJ11 port. Quick response semi-conductive surge-protect circuit, reliable surge-protect function. TD-8610 Supports bridge mode. Supports firmware upgrade. Provides external splitter.

ADSL2+ Router

TD-8840 / TD-8841 TD-8810 / TD-8811
4 10/100Mbps Auto-Negotiation RJ45 Port supports Auto MDI/MDIX, 1 RJ11 port. 1 USB port for TD-8841. Quick response semi-conductive surge-protect circuit, reliable surge-protect function. Supports bridge mode and simple router function. Built-in DHCP server. Complies with IEEE 802.3, IEEE 802.3u standards. Supports firmware upgrade. Provides external splitter.
Reliable Stable Flexible !
Experience the TP-LINK Preferred Enterprise Broadband Router.

TD-8840

TD-8841
Intel IXP network processors, provides high throughput.

TD-8810

Load Balance, provides you with dual-bandwidth/quad-bandwidth access, and gives you the ability to enjoy more Internet sources from different ISPs. Powerful Firewall.

Model No.

TD-8841 TD-8840 TD-8811 TD-8810 TD-8610
1 10/100Mbps Auto-Negotiation RJ45 Port supports Auto MDI/MDIX, 1 RJ11 port. 1 USB port for TD-8811. Quick response semi-conductive surge-protect circuit, reliable surge-protect function. Supports bridge mode and simple router function. Built-in DHCP server. Complies with IEEE 802.3, IEEE 802.3u standards. Supports firmware upgrade. Provides external splitter.
1 RJ11 + 4 RJ45 + 1 USB 1 RJ11 + 4 RJRJ11 + 1 RJ45 + 1 USB 1 RJ11 + 1 RJRJ11 + 1 RJ45

56K Modem

TM-IP5600 / TM-EC5658V
Complies with V.92 Series Data Communication and Fax Protocols. Supports Data Communication, Voice (only for TM-EC5658V) and Fax function. LED indicators for monitoring (only for TM-EC5658V). Plug and Play (only for TM-EC5658V).

TL-R488T

Internal 56K Modem TM-IP5600 External 56K Modem TM-EC5658V

Firewall Router

TL-FR5300 / TL-FR5300+
Load Balance Broadband Router
TL-R480T+ / TL-R488T / TL-R4000+ / TL-R4299G
Stability and robust security, TP-LINK Firewall Router offers you a perfect safety solution. DI , SPI and other technologies keep your data away from intruders. Network administrator is able to create groups for User/IP/Service. Flexible access polices can be applied to these groups to achieve the aim of absolute safety. TL-FR5300/TL-FR5300+ is just for enterprises that require absolute security.

TL-FR5300+

TP-LINK Load Balance Broadband Router provides multiple WAN ports in a single router. Multi-WAN technology makes it possible to use multi-ISP services. It can keep you online forever. The breakdown of one port wont lead to network failure because other ports are still working as backups. At the same time, tactful traffic policies help to keep data transferring propitious. Load Balance tactics is applied so that network traffic can be properly distributed to each port. All these bring you efficiency.

TL-R4000+

Provides DI (Deep Inspection) and SPI (Stateful Package Inspection), support URL Filtering, Email Send/Receive Filtering and Web request mode controlling. Provides flexible Time Table and QoS settings. Provides enhanced firewall functions, be on guard of DoS attacks. IPv6 Ready. Complies with IEEE 802.3, IEEE 802.3u standards. 1/2 10/100M Auto-Negotiation RJ45 WAN port, 4/3 10/100M Auto-Negotiation RJ45 LAN ports, supports Auto MDI/MDIX. Supports user certification function. Supports IP-based, User-based, Service-based firewall strategy. Supports Port Mirror, Port VLAN. Supports SYSLOG, external SYSLOG server. Supports DHCP, UPnP, DDNS, DMZ host, Virtual Server, Static Routing, VPN Pass-through. Supports Web and Remote Management. Supports CLI configuration. Supports online upgrade. Supports configuration backup/restore. Supports 4 Priority Queues, MLD Snooping and IPv6 TC. Internal power supply Standard 19-inch rack-mountable steel case.
Intel IXP core, main frequency 533MHz for TL-R488T / TL-R4000+ / TL-R4299G; Intel IXP core, main frequency 266MHz for TL-R480T+. Provides 1 100M fiber module expansion slot, shared with WAN1 port (only for TL-R4000+). Provides double-bandwidth / Quad-bandwidth access, supports Load Balancing. Backups connections automatically. Specifies channel priority according to the source or destination of IP addresses, distributing flexibly Internet resource and services from different ISP. Supports Port Bandwidth Control, Port Mirror, Port-based VLAN for LAN ports (except for TL-R488T). IPv6 Ready. Complies with IEEE 802.3, IEEE 802.3u standards. 2/4/2/2 10/100Mbps Auto-Negotiation RJ45 WAN ports, 3/1/3/8 10/100Mbps Auto-Negotiation RJ45 LAN ports, Auto MDI/MDIX, 1 SFP LAN port for TL-R4299G. Shares data and Internet access for users. Connects to the Internet on demand (only for PPPoE). Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP. Built-in NAT and DHCP server supporting static IP address distributing. Built-in firewall supports IP Address Filtering, Domain Name Filtering, and MAC Address Filtering. Supports Virtual Server, Special Application, and DMZ host. Supports UPnP, Static Routing, VPN Pass-through. Supports connecting to the Internet and disconnecting from the Internet on a specified time. Supports access control, network administrators can establish time-based access policies for staffs. Supports Flow Statistics. Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filtering. Ignores Ping packets from WAN or LAN ports.

TL-R4199G won the Annual Product of PC WORLD in 2006.
Complies with IEEE 802.3, IEEE 802.3u standards. Built-in firewall supports IP Address Filtering, Domain Name Filtering, and MAC Address Filtering. Shares data and Internet access for users, supports PPPoE, Dynamic IP, Static IP, L2TP, Big Pond Cable Internet access (only for TL-R460 and TL-R860). Supports UPnP, Static Routing, VPN Pass-through. Supports Dynamic DNS (only for TL-R460 and TL-R860). 1 10/100Mbps Auto-Negotiation RJ45 WAN port, 4/4/8 10/100Mbps Auto-Negotiation RJ45 LAN ports, Auto MDI/MDIX. Built-in NAT and DHCP server. Supports access control, parents and network administrators can establish time-based access policies for children or staffs (only for TL-R460 and TL-R860). TL-R460 TL-R460 / TL-R860

TL-R480T

TL-R4000
Model No. Model No. TL-R480T TL-R4000 TL-R4199G Network Processor
266MHz Intel IXP 533MHz Intel IXP 533MHz Intel IXP
1 WAN + 4 LAN 1 WAN + 4 LAN 1 WAN + 8 LAN

Specific Function

/ DDNS, Parental Control, Advanced firewall DDNS, Parental Control, Advanced firewall
Home Home and Small Office Home and Small Office

10/100M RJ45 Ports

Gigabit Ports

/ / 1 SFP

Medium Business Medium and Sizeable Enterprise Medium Business

TL-R402M TL-R460 TL-R860

A powerful Managed Gigabit Switch for any company !
TP-LINK Managed Gigabit Switch offers you powerful management functions. It can manage your network much easier than before due to flexible access modes. You can use CLI over telnet sessions or SNMP Management or Web Management. Stability is a keyword of network. Our Managed Gigabit Switch assures you great stability and excellent performance. Meanwhile, multiple spanning tree protocol, complete QoS tactics and powerful security functions ensure a reliable network.

Managed Gigabit Switch

Web Smart Gigabit Switch
TL-SG3109 / TL-SG3216 / TL-SG3224 / TL-SG3248 / TL-SL3428 / TL-SL3452
TL-SG2109WEB / TL-SG2216WEB / TL-SG2224WEB / TL-SG2248WEB TL-SL2210WEB / TL-SL2218WEB / TL-SL2428WEB / TL-SL2452WEB
TP-LINK Managed Gigabit Switch offers you powerful management functions. It can manage your network much easier than before due to flexible access modes. You can use CLI over telnet sessions or SNMP Management or Web Management. Stability is a keyword of network, our Managed Gigabit Switch assure you great stability and nice performance. Meanwhile, multiple spanning tree protocol, complete QoS tactics and powerful security functions ensure a reliable network.
TP-LINK Web-Smart Gigabit Switch brings you a well designed gigabit solution. Excellent-performance CPU and large volume of memory guarantee strong ability of data processing. Internal VCT makes it possible to detect the status of cable directly. Dynamic MAC address management makes it flexible to control the access ability of each port on the switch. Furthermore, you can backup/restore the configuration file at any time. All the functions we just referred to can be achieved through an easy-to-use web interface which is pretty friendly.

Fully Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3z standards. Supports SNMP, Web and Telnet/Console management. Supports SNMPv1, SNMPv2c, SNMPv3. Supports RMON statistics, history, alarm and event group. Supports GARP and GVRP. Supports IEEE 802.1X Port-Based Network Access Control protocol and connect to RADIUS. All ports support Auto-Negotiation and Auto MDI/MDIX. Supports IEEE 802.3x flow control for Full-Duplex mode and collision-based backpressure for Half-Duplex mode. Supports Port-Based VLAN and IEEE 802.1Q Tag VLAN. Supports IEEE 802.3ad port trunk with LACP. Supports Static MAC address and filtering MAC address management. Supports the configuration function of Port Security, Broadcast Storm Control and Port Mirror. Supports IEEE 802.1D/802.1s/802.1w Spanning Tree protocol. Supports IGMP Snooping. Supports Static Port Priority and IEEE 802.1p Class of Service (CoS) priority queuing and TCP/IP DSCP queuing. Supports Virtual Cable Tester.
Fully Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3z standards. Quick and easy setup with Web-based management. Supports Port-Based VLAN and IEEE 802.1Q Tag VLAN. Supports Port Trunking. Supports the configuration function of Port Security, Broadcast Storm Control and Port Mirror. Supports Virtual Cable Tester. All ports support Auto-Negotiation and Auto MDI/MDIX. Supports IEEE 802.3x flow control for Full-Duplex mode and collision-based backpressure for Half-Duplex mode. Supports Static MAC address and filtering MAC address management. Supports Static Port Priority and IEEE 802.1p Class of Service (CoS) with 4-level priority queuing.
TL-SG2224WEB was rewarded Editors Choice of PC MAGAZINE 2006
TL-SL2210WEB / TL-SG2109WEB / TL-SL2428WEB / TL-SG2224WEB TL-SG3109 / TL-SL3428 /TL-SL3226P/TL-SG3224
Web Smart Gigabit Switch Management Interface Snapshot

Model No. TL-SG2109WEB

10/100M Ports

/ / / / 24 48

10/100/1000M RJ45 Ports

Expandable Ports

1 1000M SFP 2 100/1000M SFP
(shared with port 15, 16)

MAC Address Table

8K 8K 8K 8K 8K 8K 8K 8K

Buffer Memory

1Mb 2Mb 2Mb 6Mb 1Mb 2Mb 4Mb 7Mb

BackPlane

20G 32G 48G 96G 7.6G 7.6G 20G 20G
Model No. TL-SG3109 TL-SG3216 TL-SG3224 TL-SG3248 TL-SL3428 TL-SL3452

10/100/1000M RJ45

(shared with port 15, 16) (shared with port 23, 24)

8K 8K 8K 8K 8K 8K

1Mb 2Mb 2Mb 12Mb 4Mb 7Mb

20G 32G 48G 96G 20G 20G

TL-SG2216WEB TL-SG2224WEB TL-SG2248WEB TL-SL2210WEB TL-SL2218WEB TL-SL2428WEB TL-SL2452WEB

2 100/1000M SFP

(shared with port 23, 24)
2 100/1000M SFP 2 1000M SFP 2 SFP 2 SFP
(shared with port 47, 48)
2 1000M SFP 1 SFP 1 SFP 2 SFP 2 SFP

Remote Smart Switch

TL-SL2109+ / TL-SL2117+ / TL-SL2226+ TL-SF2016+ / TL-SF2024+
Unmanaged Gigabit Desktop Switch
TL-SG1005D / TL-SG1008D / TL-SG1016D / TL-SG1024D
Using RSSM software, TP-LINK Remote Smart Switch offers a management which is different from Web and CLI. Allowing users to access and manage their networks anywhere. Taking advantage of TP-LINK Remote Smart Switch, users will find it quite convenient to get access to and even manage their network anywhere. TP-LINK Remote Smart Switch, right choice of any SOHO network.
Simply the best! TP-LINK Unmanaged Switch offers a Plug & Play network solution. Using our unmanaged switch, if only you set up your LAN by simply plugging the cable between switch and PC (or laptop), youre able to surf the Internet through a router freely without configuring the switch. We have various models covering 10/100Mbps and Gigabit switches, which can be desktop or rack mountable, with plastic or metal housing. At least one of them fits your demand.
Fully Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3z standards (only for SL Series). Provides Remote management for Smart Configuration. Supports per port egress/ingress Bandwidth Control. Supports Static Port Priority and IEEE 802.1p Class of Service (CoS) with 2-level priority queuing and IP DSCP queuing. Supports Port Status. All ports support Auto-Negotiation and Auto MDI/MDIX. Supports IEEE 802.3x flow control for Full-Duplex mode and collision-based backpressure for Half-Duplex mode. Supports Port-Based VLAN and IEEE 802.1Q Tag VLAN. Supports Port Trunking. Supports Port Enable/Disable. Supports the configuration function of Port Security, Broadcast Storm Control. Supports Broadcast Flow Control, Multicast Flow Control.
Fully Complies with IEEE 802.3, 802.3u and 802.3ab standards. Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. Plastic case, desktop or wall-mounting design. 5/8/16/24 10/100/1000Mbps Auto-Negotiation RJ45 ports support Auto MDI/MDIX. All ports support Full-Duplex/Half-Duplex transfer mode for 10Mbps/100Mbps and Full-Duplex transfer mode for 1000Mbps. Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode. Store and Forward. Supports MAC address auto-learning and auto-aging. LED indicators for monitoring power, link, activity speed. External power adapter supply.

TL-SG1005D

TL-SG1008D
TL-SF2016+ / TL-SF2024+ / TL-SF2226P+ Remote Smart Switch Management (RSSM) Interface Snapshot

8K 8K 8K 8K

896Kb 1.152Mb 2.72Mb 4Mb

10G 16G 32G 48G

TL-SG1005D TL-SG1008D TL-SG1016D
Model No. TL-SL2109+ TL-SL2117+ TL-SL2226+ TL-SF2016+ TL-SF2024+

10/100M Ports 24

8K 8K 8K 8K 8K
1.25Mb 1.25Mb 2.5Mb 1.25Mb 2.5Mb

3.6G 5.2G 8.8G 3.2G 4.8G

TL-SG1024D

Fiber Module Table

TL-SM311LM TL-SM311LS

Description

Mini GBIC module, Multi-mode, LC interface, Up to 550/275m transmission distance Mini GBIC module, Single-mode, LC interface, Up to 10km transmission distance
TL-SG3109, TL-SG3216, TL-SG3224, TL-SG3248, TL-SL3428, TL-SL3452 TL-SG2109WEB, TL-SG2216WEB, TL-SG2224WEB, TL-SG2248WEB, TL-SL2210WEB, TL-SL2218WEB, TL-SL2428WEB, TL-SL2452WEB, TL-SL1351 TL-R4199G, TL-R4299G
Unmanaged Gigabit Rackmount Switch
Pure-Gigabit: TL-SG1008 / TL-SG1016 / TL-SG1024 / TL-SG1048 Gigabit-Uplink: TL-SL1109 / TL-SL1117 / TL-SL1226 / TL-SL1351
Unmanaged 10/100M Desktop Switch
TL-SF1005D / TL-SF1008D / TL-SF1016D
Fully Complies with IEEE 802.3, 802.3u and 802.3ab standards. Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode. Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. Rack-mountable steel case. 8/16/24/48 10/100/1000Mbps Auto-Negotiation RJ45 ports support Auto MDI/MDIX. All ports support Full-Duplex/Half-Duplex transfer mode for 10Mbps/100Mbps and Full-Duplex transfer mode for 1000Mbps. Store and Forward. Supports MAC address auto-learning and auto-aging. LED indicators for monitoring power, link, activity, speed. Internal power supply. TL-SG1008 / TL-SG1016 / TL-SG1024 / TL-SG1048
Fully Complies with IEEE 802.3, 802.3u standards. Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode. Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. Plastic case, desktop or wall-mounting design. 5/8/16 10/100Mbps Auto-Negotiation RJ45 ports support Auto MDI/MDIX. All ports support Full-Duplex and Half-Duplex transfer mode. Store and Forward switching method. Supports MAC address auto-learning and auto-aging. LED indicators for monitoring power, link, activity. External power adapter supply. TL-SF1016D

TG-3269 / TG-3201
Complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards. One 10/100/1000Mbps Auto-Negotiation RJ45 port supports Auto MDI/MDIX. Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode. Supports Jumbo Frame. Complies with PCI v2.1/2.2/2.3 standards. TR-966D Supports Full-Duplex/Half-Duplex transfer mode for 10/100Mbps and Full-Duplex transfer mode for 1000Mbps only. Provides BOOTROM socket, supports Remote Boot. Supports IEEE 802.1p for Packet Priority and IEEE 802.1Q VLAN tag Frame (only for TG-3269). Four LED indicators for monitoring link, activity, speed, Full-Duplex. Supports drivers for NetWare 4.x, 5.x, 6.x, Windows 98SE/Me/NT4.0/2000/XP, and Linux 2.2.x/2.4.x/2.6.x kernel. TG-3269
Complies with 802.3u 10/100Base-TX and 100Base-FX standards. 2 SC fiber connectors supporting Half-Duplex/Full-Duplex transfer mode, manual switching. 2 10/100Mbps Auto-Negotiation RJ45 connectors supporting Auto MDI/MDIX, Half-Duplex/Full-Duplex transfer mode. Extend fiber distance up to 20km. Easy-to-view LED indicators for monitoring Power, Link, Activity. External power adapter supply.
(WDM Fast Ethernet Media Converter)
TR-965DA / TR-965DB MC111CS / MC112CS
Complies with 802.3u 10/100Base-TX and 100Base-FX standard. 1 SC fiber connector supporting Half-Duplex/Full-Duplex transfer mode, manual switching. 1 10/100Mbps Auto-Negotiation RJ45 connector supporting Auto MDI/MDIX, Half-Duplex/Full-Duplex transfer mode. Extend fiber distance up to 20km. Easy-to-view LED indicators for monitoring Power, Link, Activity. External power adapter supply. MC111CS and MC112CS can be installed into a TP-LINKs 19 system chassis.
Model No. TG-3269 TG-3201

TR-965DA TR-965DB

10/100/1000Mbps 10/100/1000Mbps

32-bit PCI 32-bit PCI

Realtek Marvell

Remote Boot

X TG-3201

10/100M Network Adapter

TF-3239DL / TF-3239D / TF-5239
TR-932D / TR-962D MC100CM / MC110CS
(Fast Ethernet Media Converter)
Complies with IEEE 802.3, IEEE 802.3u standards. Provides BOOTROM socket, supports Remote Boot (only for TF-3239D). Provides diagnostic software. Complies with PCI v2.1 / v2.2 standards for TF-3239DL, TF-3239D. One 10/100Mbps Auto-Negotiation RJ45 port. TR-932D TR-962D Supports Full-Duplex and Half-Duplex transfer modes. Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode. One LED indicator for monitoring link/activity for TF-3239DL, TF-3239D, and two LED indicators for monitoring link/activity, speed for TF-5239. Supports drivers for NetWare 3.x, 4.x, Windows 98/Me/NT4.0/2000/XP, and Linux 2.4.x kernel. Plug-and-Play for Windows OS and Linux 2.4.x kernel.
Complies with 802.3u 10/100Base-TX and 100Base-FX standard. 1 SC fiber connector supporting Half-Duplex/Full-Duplex transfer mode, manual switching. 1 10/100Mbps Auto-Negotiation RJ45 connectors supporting Auto MDI/MDIX, Half-Duplex/Full-Duplex transfer mode. Extend fiber distance up to 2km for Multi-mode fiber and 20km for Single-mode fiber. Easy-to-view LED indicators for monitoring Power, Link, Activity. External power adapter supply. MC100CM and MC110CS can be installed into a TP-LINKs 19 system chassis.

Model No. TR-966D TR-965DA TR-965DB TR-932D TR-962D MC111CS MC112CS MC100CM MC110CS
2RJ45 + 2SC 1RJ45 + 1SC 1RJ45 + 1SC 1RJ45 + 1SC 1RJ45 + 1SC 1RJ45 + 1SC 1RJ45 + 1SC 1RJ45 + 1SC 1RJ45 + 1SC

Transmission Medium

WDM Fiber WDM Fiber WDM Fiber Fiber Fiber WDM Fiber WDM Fiber Fiber Fiber
Single-mode Single-mode Single-mode Multi-mode Single-mode Single-mode Single-mode Multi-mode Single-mode

Fiber Distance

20Km 20Km 20Km 2Km TF-3239DL 20Km 20Km 20Km 2Km 20Km TF-3239D TF-5239
Model No. TF-3239DL TF-3239D TF-5239
10/100Mbps 10/100Mbps 10/100Mbps
32-bit PCI 32-bit PCI 32-bit CardBus

Realtek Realtek Realtek

Awards
Favorable Comments from Some Media:
Australian PC World: Based on its (TL-WR642G) excellent wireless performance and low price, this is recommended router for every type of user. Its easy to set up and use and it showed stable performance throughout our test. PC Magazine: TL-SG2224WEB, TP-LINKs 24-port WEB Managed Pure-Gigabit Switch, high quality with competitive price, is awarded EditorsChoice: easy to use. In throughput test, this switch can realize 1000M all wire rate forwarding for the three kinds of data frames selected by us which are 64, 512 and 1518. It has very short forward delay that is within 3s when we try the above three kinds of testing frames in store-and-forward mode. This switch passed congestion control test smoothly. Even when there is some congestion occurred in some port, other ports can still work in a normal way. PC Magazine: We tested 7 enhanced 802.11g wireless routers, and took into account of their performance,function, as well as usability comprehensively. Finally, two models stood out, and became the products of our Editors Choice. Of which, TL-WR641G from TP-LINK gained a very high score, and won Editors Choice ultimately.
TL-WR641G/TL-WN610G won the "Editors' Choice" of the YeSky via the transverse evaluating in 2004. TL-WR641G won Editors Chioce award from PCWeekly. TL-WR641G won PC Market Recommend award from PC Market. TL-SG2224WEB won Best Product of the Year award from PC Magazine. TL-R4199G was rewarded "Annual Product of 2006" of PC World TL-WR641G won the "Desigh Award" of the Hongkong medium PC3 The TP-LINK TL-WR642G was rewarded "BEST BUYS" of Australian PC World

TL-SG2224WEB was rewarded "Editor's Choice" of PC Magazine in 2005
TL-WR641G was rewarded "Editor's Choice' of the Taiwan medium PC home Advance Diannao Wang
TL-WR641G was rewarded "Editor's Choice" of PC Magazine in 2006.
TP-LINK was rewarded "the most attention-getting brand of the users in 2006" by IT168
TL-WR541G won the "CCW Choice" of China Computer World (briefed as CCW) in 2004,
TL-WR642G was rewarded "High Light Product from 2004-2005" of Computer Partner World
TL-SG2224WEB was rewarded the "Editor's Choice" of China Information World in 2005.
TL-WR541G was rewarded the "Editor Choice" of the Sm@rtPartner 2005, which is an information provider, consultant and service provider, it delivers business information, product information, market analysis, latest management solutions and strategy for IT channel practitioners.
IT168: In 2006, TP-LINK was concerned by users much more than in 2005. The ration jumped from 26.2% in 2005 to 35.7% in 2006, increasing by nearly 10%, which showed clearly TP-LINK s rapid increase in the field of enterprise routers.TP-LINK stands top of the ranking for years. It s so popular in the marker of routers that nearly no other brands is able to compete with it in the near future. PC Weekly: Adopting the design of entire white fuselage from a South Korean designer, TL-WR641G of TP-LINK gives complete different outside impression. Equipped with practical XR technology, Firewall, and high compatibility, TL-WR641G offers a good choice for the users who require high transmission as well as stable network. PC3: TL-WR641G wins the "Design Award". It is the outlook design which differ from previous simple one that most impress me. It turns the only shortcoming of TP-LINK into advantage. Meanwhile, price is pretty attractive, only HKD299, while functions are far more than enough for family users. With 54G and 108M two models, more than one wireless upgrading choices are available. e-zone: TP-LINK is proven to be the best.To conclude from the 4 rounds of test, the TP-LINK TL-WR541G has won at an almost perfect score of 19 for its excellent performance in NAT efficiency, Wireless Connection, as well as the Materials used, Functions and Price. Advance PC: TL-WR641G,Stable Transmitting Performance.Though Super G is not a new technology, I was still surprised at the result after testing two models. During repeated tests around TL-WR641G by Chariot with same default, the throughput kept above 40Mbps. And the difference between Max. and Min. is less than 2~3Mbps. The performance is quite stable. With two barriers between and staying 5 feet away, the throughtput reached up to 36Mbps, which means the software and hardware are designed excellently. Downloading 20 files parallely with BitComet to proceed torturing test, and intervally having FTP transmitting, this product was still workable after 4 days testing. Considering the sales price and actual performance, I do think TL-WR641G is an excellent product based on Cost/Price and worthy to try by most of the players who have not enough in pocket.