54M High Power Wireless Access Point TL-WA5110G
High Power and receive sensitivity design to boost your signal coverage and link speed
Optimized performance for Ultra-Long-Distance wireless transmission
Power over Ethernet for flexible deployment

Description

The TL-WA5110G 54M High Power Wireless Access Point is dedicated to Small Office/Home Office (SOHO) and long distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client, Firewall, and NAT-Router. It features high output power and high receive sensitivity can significantly extend the transmission range to reduce dead spots and to deliver a more stable wireless connection. The TL-WA5110G provides three operation modes for multiple users to access the Internet: AP client router, AP router and AP. In AP client router mode, it works as a WISP CPE. In AP router mode, it can access the Internet via an ADSL/Cable Modem. In AP mode it can work in various modes, such as Access Point/Client/WDS Bridge/Repeater.

www.tp-link.com

Specifications
Standards Interface Wireless Signal Rates With Automatic Fallback Frequency Range Wireless Transmit Power Antenna Modulation Type IEEE 802.11g IEEE 802.11b One 10/100M Auto-Sensing RJ45 Port(Auto MDI/MDIX), supporting Passive PoE 11g:108/54/48/36/24/18/12/9/6 Mbps (Dynamic) 11b:11/5.5/3/2/1 Mbps (Dynamic) 2.4-2.4835GHz 19dBm(MAX EIRP) 4dBi detachable Omni directional antenna IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM 802.11g Receiver Sensitivity 54M: -75dBm1dB 9M: -92dBm1dB Power Supply Unit Certifications Operating Temperature Storage Temperature Relative Humidity Storage Humidity Dimensions 802.11b 11M: -91dBm1dB 1M: -95dBm1dB

Features

Supports AP Client Router(WISP Mode), AP Router and AP operation mode. High output transmission power and reception sensitivity optimized. Supports Passive Power over Ethernet. Supports Wireless Distribution System (WDS). Distance Adjustment for long range transmission, up to 50km*. Supports Antenna Alignment. Supports Layer 2 User Isolation. Provides throughput monitor. Supports Ping Watch Dog. Supports Link Speed Test. Supports Remote Management. Supports PPPoE, Dynamic IP, Static IP Internet Access. Built-in NAT and DHCP server Supports Address Reservation. Provides 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/ WPA2-PSK data security and TKIP/AES encryption, WLAN ACL (Access Control List). Supports configuration backup/restore and firmware upgrades.
* High gain directional antenna dependent
Input: localized to country of sale Output: 12VDC / 1A linear PSU CE, FCC -10C~40C (14F~104F) -40C~70C (-40F~158F) 10% ~ 90%, non condensation 5%~90% non-condensing 6.5 4.2 1.1 in. (28mm)

Diagram:

RF Cable Ethernet Cable

TL-ANT2414A

Package Contents:
- 54M High Power Wireless Access Point TL-WA5110G - Power Adapter - RJ-45 Ethernet Cable - Quick Installation Guide - Power Injector - Resource CD

TL-WA5110G

WISP Base Station

Power Injector

TL-SF1008D

WISP Client Router

Related Products:
- 14dBi 2.4GHz Directional Antenna TL-ANT2414A - 24dBi 2.4GHz Grid Parabolic Antenna TL-ANT2424B - 8-port Unmanaged 10/100M Desktop Switch TL-SF1008D
Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificationsmay be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
Point-to-Point Connection
Copyright 2009 TP-LINK Technologies Co., Ltd. All rights reserved.