Trek Bikes Incite 6I-8I
Here you can find all about Trek Bikes Incite 6I-8I like manual and other informations. For example: review.
Trek Bikes Incite 6I-8I manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Trek Bikes Incite 6I-8I please write about it to help other people.
[ Report abuse or wrong photo | Share your Trek Bikes Incite 6I-8I photo ]
User reviews and opinions
|Vinlander||7:09am on Tuesday, August 24th, 2010|
|Does this device have any real flaws? Lets address some real shortcomingsÂ of the iPad. you will love the 9 inches screen. You will enjoy the touchscreen experience with iPad Fast, Lightweight, Compact|
|fujijr||8:50pm on Tuesday, June 15th, 2010|
|My Company uses Citrix, so I am able to run Windows Applications, SAP, even flash and all my GO TO corporate applications on the device.|
|Solovei||5:55am on Wednesday, March 24th, 2010|
|PROS: OS, look, Awesomeness ITs great, and the idea is well along with the OS its a Mac downsized. its size is a bit big Bought the 16G WiFi for my wife. She enjoys playing games, surfing the web, reading books, reading email and catching up on her Soaps at ABC.com.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
TREK INCITE 6i and 8i
Bicycle Computer Owners Manual
This manual explains the installation and use of the Trek Incite 6i and Incite 8i bicycle computer. Please read this manual carefully and save it for future reference. If you do not understand the information in this manual, or CLK you have a question about your TME Incite 6i computer that this manual does not cover, consult AVG your Trek dealer. If you have a MAX question or problem that your TRP Trek dealer cant handle, contact us at: ODO
Trek Bicycle Corporation Attn: Customer Service 801 W. Madison Street Waterloo, Wisconsin 53594 http://www. trekbikes.com (920) 478-4670
Copyright Trek Bicycle Corporation 2006 All rights reserved
Safety and general guidelines...1 Functions...2 Installation...4. Placing the computer on the handlebar.5 Placing the magnet...7 Attaching the computer wire..8 Attaching the sensor...9 Easy setup (ReSet)...11. ReStart- Getting ready to ride..17 Additional information..18 Troubleshooting...19 Replacing the battery..20 Setting custom wheel size..22 Limited Warranty...25.
Safety and general guidelines
While riding your bicycle, do not stare at the computer for long periods of time (Figure 1). If you do not watch the road, you could hit an obstacle, which may cause you to lose control and fall. Make sure the computer wire cannot contact the tire or wheel spokes (Figure 2). The wire could be damaged causing the computer to malfunction. Also, the wire could get caught, causing you to lose control and fall.
Figure 1- Watch the road when riding.
Figure 2- Keep the wire out of the spokes Safety and General guidelines
Table 1- Function abbreviations, names, and explanations
CLOCK CLK TME Time of day Displays in hours and minutes, or stopwatch showing seconds. 12-hour with AM/PM or 24-hour format Highest reading: 23:59 (clock) or 23:59:59 (stopwatch)
Distance ridden Displays in miles or kilometers. TRP-Trip (since last Restart) TTL- Total since last Reset Highest reading: 99,999
CLK TME AVG MAX TRP ODO
PACER (8i only)
Always displays Indicates whether current speed is faster or slower than average speed Displayed by arrow pointing up (faster) or down (slower).
CLK TME AVG MAX TRP ODO MH
Always displays Current speed of the bicycle in miles per hour (MH) or kilometers per hour (KMH) AVG- (8i only) Average speed since last Restart, displayed to tenths. MAX- Highest value since last Restart Highest readings: 80.5mph or 129.6kph Always displays Indicates which wheel setting is in use by computer
WHEEL SELECTION (8i only)
Figure 3- Location on bicycle of sensors and computer
Tools needed: Electrical tape Slot-type screwdriver Phillips-type screwdriver Scissors
Placing the computer on the handlebar
The Trek Incite 6i and 8i computer can be mounted on the handlebar or on the stem (Figure 3).
To install the computer on handlebar
1. Select the bar clamp that fits your bike. 31.8mm bars: large clamp 25.4mm and 26.0mm: small clamp 22.2mm bar: small clamp with rubber shim 2. Insert the handlebar clamp into the back of the computer base (Figure 4) and slide it towards the front of the base.
Figure 4- Clamp and friction pad in computer base
3. Insert the rubber friction pad into the computer base, aligned across the computer base. 4. With the wire pointing toward the front of the bike, wrap the bar clamp around the handlebar. 5. Insert the screw through the washer and into the computer base. 6. Tighten the screw until the computer base cannot rotate on the handlebar. 7. Slide the computer into the computer base until the front of the computer and computer base line up.
Check that the computer base cannot be rotated around the handlebar, and that the computer cannot slide backwards on the computer base (Figure 5).
To install the computer on the stem
1. Insert the rubber friction pad into the computer base, aligned along the computer base.
Figure 5- Make sure the computer cannot be bounced off.
2. Insert two nylon ties through the computer base (Figure 6). 3. Place the base on the stem and tighten the nylon tie. 4. Slide the computer into the computer base until the front of the computer and computer base line up. 5. Check that the computer base cannot be rotated around the stem and the computer cannot slide backwards on the computer base.
Figure 6- Nylon tie threaded through computer base Installation
6. Tighten the nylon ties and trim the excess length.
Placing the magnet
The wheel magnet must be aligned so that it passes across the sensor. As the magnet passes the sensor, it must be no further from the sensor than 1 to 3mm (1/32 to 1/8 inch). The wheel magnet has a T shaped slot with two configurations: round spokes and flat or bladed spokes (Figure 7).
To install the wheel magnet
1. Remove the screw from the magnet. 2. Slide the slot in the back of the magnet over the spoke. For a flat or bladed spoke, start the spoke near the end where the spoke is round, and align the top of the T with the spoke as you slide the magnet up the blade (Figure 7). 3. Thread the screw into the magnet until it is snug against the spoke.
Figure 7- Installing magnet on round or oval spokes
Attaching the computer wire
The computer wire is usually longer than needed. Extra wire length can be diverted by wrapping it around the brake housing prior to routing it down the fork blade or down tube (Figure 8). Make sure the computer wire is not pulled tight when the handlebar is turned all the way to either side.
To attach the computer wire
1. Determine the length of wire to divert by holding the sensor at its desired mounting point. 2. Wrap the wire around the front brake cable, diverting the determined amount. 3. Continue routing the wire, either by wrapping around the fork or frame tube, or attach the wire to the fork or frame tube with electrical tape. 4. As needed, solidify the wire attachment with either nylon ties or electrical tape.
Figure 8- Trim excess nylon tie length
Attaching the sensor
The magnet must pass across the line on the sensor (Figure 9).
To install the sensor
1. Align the sensor with the magnet. 2. Orient the sensor so that the clearance between the sensor and the magnet is between 1 to 3mm. The sensor can be rotated around the fork about 45 degrees. If needed, the sensor and magnet can be moved up or down the spoke and fork to change the amount of clearance. 3. Attach the sensor with nylon ties, but do not fully tighten.
Figure 9- Magnet alignment and 4. With the computer in the computer base, check the alignment of the sensor clearance and magnet by spinning the wheel and noting if the computer is displaying speed. If the computer shows current speed, the sensor is reading the magnet. If the computer is not displaying a value, realign the sensor and magnet until one is displayed. Installation
5. Tighten the nylon ties and trim the excess length (Figure 10).
Figure 10- Trim excess nylon tie length
Easy setup (ReSet)
You can program the starting values of your computer in a single, easy procedure: Units Clock Wheelsize Odometer The Units setting tells the computer which conversion to use: metric or SAE (English): MH = miles KMH = kilometers You can set the clock for 12 or 24 hour display, which changes how time appears in the afternoon, such as 3PM: 12 hour clock 3:hour clock 15:00 You can set the wheel size by simply choosing from a menu listing tire sizes, or you can set custom values listed in a chart. For the most precision, do a rollout test. The rollout test is described on page 22. You can set the odometer to be at 0 or you can start at a different value. This allows you to keep track of your previous mileage after the computer has Reset (started over at 0), such as after installing a new battery.
Easy setup (ReSet) 11
Using the buttons
When setting the computer, there are three ways to use the buttons. To help you remember, notice the way each term is underlined. To help you CLK MH TME AVG remember, these terms will look the MAX TRP Set same throughout the manual. ODO Push- touch once Cycle - push repeatedly as needed Hold- push and hold in for two or three seconds Mode The buttons on the computer are Figure 11- Buttons on the Incite 6i computer (Figure 11): Set button on the right side Mode button on the bottom To set the computer, you must Push, Cycle, or Hold the two buttons in a specific sequence.
To set the computer
1. Cycle Mode to ODO (Figure 12). 2. Hold Set KMH or MH flashes. 3. Cycle Mode MH and KMH interchange on the screen. 4. Push Set to select. 5-digit odometer value appears with first digit flashing. 5. Cycle Mode to your preferred value. 6. Push Set to select. The next digit flashes. 7. Repeat steps 5 and 6 until all digits are selected. The computer returns to the start screen.
Figure 12- ODO screen
To set 6i wheel size
For 8i, go to page 14, To set 8i wheel size 1. Cycle Mode to TME. 2. Hold Set Wheel size appears on the screen.
Note: If you want to set a custom wheel size, go to page 24 now. 3. Cycle Mode The Wheel Size changes. 4. Hold Set to select. The computer returns to current speed.
To set 8i wheel size
The 8i allows you to use two different wheel sizes. The icon for Wheel 1 is a small circle. The icon for Wheel 2 is a partial circle surrounding the Wheel 1 icon (Figure 13). 1. Cycle Mode to TME. 2. Hold Set Wheel Select icon appears on the screen.
Figure 13- Select wheel screen
3. Cycle Set to show Wheel 1 or Wheel 2. 4. Push Mode to select. The wheel size appears. Note: If you want to set a custom wheel size, go to page 24 now.
5. Cycle Mode The wheel size changes.
6. Hold Set to select. The computer returns to current speed. To set the second wheel size, repeat the instructions, but select the other Wheel Select icon.
To select the wheel for use
1. Cycle Mode to TRP 2. Hold the left Mode and the right Mode together. The Wheel Select icon changes (Figure 13). Repeat step 2 to change again.
To set Clock
1. Cycle Mode to CLK (Figure 14). 2. Hold Set 12 or 24 flashes. 3. Cycle Mode 12 and 24 interchange on the screen. 4. Push Set to select The clock appears on the screen with the Hour flashing. 5. Cycle Mode The Hour changes. 6. Push Set to select. The Minutes flash. 7. Cycle Mode 8. Push Set to select. The computer returns to current speed.
Figure 14- CLOCK screen
ReStart- Getting ready to ride
Your computer stores data for two intervals- since last ReSet and since last ReStart. ReSet sets ALL data to zero. ReStart sets only the Trip data to zero. The trip modes include TRP TME MAX This operation sets all four values to zero, allowing the computer to display information for a single ride.
Figure 15- MAX screen
To ReStart (set the Trip data to zero)
1. Cycle Mode to TRP (Figure 15). 2. Hold Set, and do not let up until after completing step 3. 3. Hold Mode. The Max setting ReStarts at 0.
Once the computer is programmed and installed, it is very easy to use. To change to different modes (functions), simply Cycle the Mode button until the desired function appears, shown by the spelled name of the function.
Removing the computer from the computer base
The computer is held on its base by a flexible snap. To remove the computer, press firmly on the computer (not on the base) in a rearward direction.
Using the computer in wet weather
Bicycle computers function on electricity. If the electrical contacts between the computer and its base become saturated, the electrical signals may become irregular or interrupted entirely. If the computer is to be used in heavy rain, etc., we recommend that a plastic bag be put over the computer and its base. The other parts of the computer system are waterproof.
The Incite 6i computer is designed to be easy to install and maintain. However, computers occasionally have problems. Table 3 shows some possible problems, causes, and solutions:
Table 3- Common problems and solutions Blank screen Computer is in shipping mode. Push a button. Battery is dead, or installed incorrectly. Reinstall good battery. Erratic data Magnet misaligned or too far away. Re-adjust magnet and sensor placement. Battery power is low. Replace battery. No current speed Speed is incorrect. Magnet misaligned or too far away. Re-adjust magnet and sensor placement. Wheel size is incorrect. Reset computer. Sensor is not reading magnet properly. Readjust magnet and sensor alignment.
Replacing the battery
If the computer is giving erratic information, the computer or hear rate strap battery may be running low on power (normally accompanied by the low battery icon, Figure 15). Replace the batteries whenever the computer malfunctions, or every 6 months. When purchasing new batteries, it is best to take the old batteries with you. However, this is the generic description for the proper battery: CR2032, lithium cell, 3 volts When the battery is removed, the computer automatically resets function totals to Zero. After installing a new battery, you can manually set your totals, but you must note those values before removing the battery.
To replace the battery
1. Remove the computer from its base. 2. Identify the battery cover, with its deep slot (a similar battery cover is found on the back, or skin-side, or the heart rate strap). 3. Insert a large coin into the slot and rotate in a counter-clockwise direction about one-quarter turn (Figure 16).
Figure 16- Removing battery cover 20 Replacing the Battery
4. Lift the battery cover, exposing the battery. Be careful to avoid losing the rubber O-ring seal. 5. Remove the old battery. It may be possible to shake the battery out. Otherwise, carefully pry the battery up with a thin tool or knife blade. 6. Insert the new battery with the cross and identifying label pointing up (Figure 17). 7. Replace the battery cover (and O-ring seal) and turn one-quarter turn clockwise.
Figure 17- The cross on the battery points up
Replacing the Battery
Setting custom wheel size
The procedure is almost the same as the basic setup on pages 13-14, except instead of picking a wheel size from the menu, you can program in a 4-digit number.
Selecting the custom value 4-digit number
There are two methods for selecting the custom wheel size value: Select a value from Table 3, Custom wheel size codes. Do a rollout test to measure the circumference of your wheel (page 24).
Table 3- Custom wheel size codes 700 x x x x x x 26 x 1.x 1.x 1.x 2.x 2.x 2.2075
1. Cycle Mode to TME. 2. Hold Set Wheel size appears.
700 x 38
Custom 0000 - 2999
For 8i, Cycle Set to the preferred Wheel Select icon for Wheel 1 or Wheel 2, and Push Mode to select.
22 Setting Custom Wheel Size
3. Cycle Mode through the wheel sizes to the 4-digit number 4. Push Set The left-hand digit flashes. 5. Cycle Mode The right-had digit changes. 6. Push Set to select. The second digit flashes. 7. Repeat steps 5 and 6 to select all four wheel-size digits. 8. Hold Set The computer returns to current speed.
Setting Custom Wheel Size
To measure rollout for wheel size
Table 1 approximates the circumference of each tire size. Instead of using an approximation, you can measure the actual circumference of your wheel. You need a helper, your bike, and a smooth floor with enough room to roll the bike about 7 feet (245 cm) in a straight line. 1. With the valve stem of the front wheel directly over the floor Figure 18), sit on the bike.
Figure 18- Measuring rollout for wheel size
2. Have your helper mark the floor at the valve stem. 3. While you sit on the bike, have the helper roll the bike forward one revolution of the wheel, so that the valve stem is again directly over the floor. 4. Mark the new location of the valve stem. 5. Measure the distance between the marks, in millimeters. If you can only measure in inches, convert to millimeters by multiplying by 25.4. 6. Use the result to program your computer, following the instructions on page 22.
Trek Bicycle Corporation warrants each new Incite computer against defects in workmanship and materials.
This warranty covers
Trek Incite computer models 6i, 8i, 9i, 11i, ACH, and ACH Digital for a period of two years from the date of sale.
This warranty does not cover
Normal wear and tear, including the length of battery life Improper assembly Installation of parts or accessories not originally intended for, or compatible with the component as sold Damage or failure due to accident, misuse, abuse, or neglect
This warranty is void in its entirety by any modification of the component or its parts. This warranty is expressly limited to the repair or replacement of a defective item and is the sole remedy of the warranty. This warranty extends from the date of purchase, applies only to the original owner, and is not transferable. Trek is not responsible for incidental or consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. Claims under this warranty must be made through an authorized dealer. Proof of purchase is required. This warranty gives the consumer specific legal rights, and those rights may vary from place to place. This warranty does not affect the statutory rights of the consumer.
Limited Warranty 25
COMPUTERS | TREK AFTERMARKET
Incite ACH Digital
Link Team DW
Incite 9i Wireless SL
Transmission Type Current Speed Ride Time Settable Odometer Maximum Speed Clock (12-24 hour) Trip Distance Ambient Temperature Average Speed Dual Wheel Size Pacer Rear Wheel Mount Low Battery Indicator Auto Start/Stop Works with Speed Trap Average Cadence Maximum Cadence Cadence Wireless Total Altitude Gain/Loss Max Altitude Altitude Trip Altitude Current Heart Rate Maximum Heart Rate Average Heart Rate 3 Settable Training Zone-Heart Rate Trip Time in Above and Below HR Backlight Cadence Wired Digital Compass
optional optional optional
optional optional optional optional optional
Incite 8i Wireless
Grey w/ Purple Buttons
Grey w/ Red Buttons
Transmission Type Current Speed Ride Time Settable Odometer Maximum Speed Clock (12-24 hour) Trip Distance Ambient Temperature Average Speed Dual Wheel Size
Rear Wheel Mount Low Battery Indicator Auto Start/Stop Works with Speed Trap Average Cadence Maximum Cadence Cadence Wireless Total Altitude Gain/Loss Max Altitude Altitude Trip Altitude Current Heart Rate Maximum Heart Rate Average Heart Rate 3 Settable Training Zone-Heart Rate Trip Time in Above and Below HR Backlight Cadence Wired Digital Compass
GM-X544 IC-M402 Screens Asko 1325 Recorder ASD-51W Theater 3 SH888 B1445AV Hdrw720-00 Rimfire Asus VX97 Dual TV Thomson CS66 RL41hcih Blackwhite Cube 1500 Classic WD-14311FD Proxima C175 Versatis 700 Review 1030SW 19PFL3403D 10 P1224 Dmpbd80 MZ-5N Alcatel-lucent 570 Sportview 42PT85 RDM128 Wireless DVR500 Yamaha YZ85 RM-V210 C3300 Xlhp737 KDL-32EX500 ERN29601 940MG CMT-MX550I VME110E MHC-RXD7AV CL21Z43MQ Monitor HT303SU-a2 ROC 2406 321 GSX 530SI Reference Tahoe 1999 Roland MOC1 A105-S361 Motorola H375 Daisy 15XT PM655 310 315 5000N PT-LC56U 67-250 Hdmi ECR 2150 Nuvi 775 DPL930VD-radio DVP-FX860DT 3crwe454G72 Jukebox Ipod-HP PCG-TR3A Eton E1 MF4270 C1100 SRU5120 Drive FP561BF1 Caddx NX8 BM1308 Fujifilm A230 Cable VLS517 HMB406 WGE101 DSC-P2 Control Plus 81290 FWD-42PV1A IP6600D Awes12P TEW-652BRP Gls 1988 8FF3FPW DVD-V7500K 205FCC Deville GT152 HT-Q100 SC7830 LE19B541c4W WA1101TE DVD-S657 Widl 106 6115MFP
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101