Uniden BC350A, size: 389 KB
Here you can find all about Uniden BC350A like manual and other informations. For example: mods, scanner.
Uniden BC350A manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Uniden BC350A please write about it to help other people.
[ Report abuse or wrong photo | Share your Uniden BC350A photo ]
Uniden Bearcat BC350A
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Table of Contents
About Your New BC350A. 2 What is Scanning. 2 Types of Communications. 2 Where to Obtain More Information. 3 Unpacking. 3 Optional Accessories. 3 Summary of Features. 4 Installing the BC350A. 5 For Home Use. 5 For Mobile Use. 5 Controls and Functions. 7 Screens. 11
Scanning Overview. 13 Getting Started. 13. 14
Adjusting the Squelch
Programming Frequencies. 14 Program Lock Feature. 17 Channel Lock Out. 18 A Word About Memory Back-up. 19 Scanning. 20 Weather Channel Scan. 20
Helpful Hints. 21 Troubleshooting. 22 Technical Specifications. 24
About Your New BC350A
The BC350A is not just a scanner. It is a brand new information radio with automatic scanning capabilities. The built-in Service Scan system brings you instantly into the exciting world of scanning action. Whats more, you dont even have to program the scanner to begin using it! The BC350A comes with five Service banks for monitoring police, fire/emergency, marine, air, and weather frequencies. Not only that, theres even a fully programmable bank for storing your own private collection of favorite frequencies. With the BC350A, you can scan almost 1,000 channels. In addition, the BC350A has 11 separate band search capabilities for even greater scanning action. Two Service Scan banks, POLICE and FIRE/EMG, are also programmable. So whenever you encounter a newly activated local frequency for either service category, you can add it to the bank for that category. This gives you quick access to the frequencies you want to hear. So enjoy your BC350A!
What is Scanning?
Unlike standard AM or FM radio stations, most two-way communications (listed below) do not transmit continuously. The BC350A scans programmed channels at the rate of up to 100 channels per second until it locates an active frequency. When scanning stops on an active frequency, it remains on that channel as long as the transmission continues. When the transmission ends, the scanner stays on the channel for 2 more seconds, waiting for another transmission. If no response is detected, the scanning cycle resumes until another transmission is received.
Types of Communication
You will be able to monitor communication such as: Police and fire department (including rescue and paramedics) NOAA weather broadcasts (7 pre-programmed channels) Business/industrial radio Motion picture and press relay Utility Land transportation frequencies, such as trucking firms, buses, taxis, tow trucks, and railroads Marine and amateur (ham radio) bands Air band And many more in the 29-54 MHz, 137-174 MHz, and 406-512 MHz ranges
Where to Obtain More Information
The Bearcat Radio Club and other similar hobby clubs have publications, information on computer bulletin boards, and even contests for the radio enthusiast. See the enclosed pamphlets for more information. Additional information is also available through your local library.
Carefully check the contents against this list: BC350A Auto Scanner Telescoping Antenna AC Adapter (Model AD-140U) Mobile Mounting Bracket with Hardware DC Power Cord Cigarette Lighter Power Cord This Operating Guide Registration Form (in this Operating Guide) Frequency Directories Order Form and other pamphlets If any items are missing or damaged, contact your place of purchase immediately. Complete and mail your Registration Form immediately. Please read this Operating Guide thoroughly before operating the scanner.
The following optional accessories for your BC350A are available from your local Uniden Dealer or through the Uniden Customer Service Center by calling: (317) 842-2483, 8:00 AM to 5:00 PM EST, Monday through Friday. BC AT Mobile Antenna - For mobile installation, use a mobile antenna designed for multi-band coverage, such as the Uniden BC AT mobile antenna. PLG-134 Antenna Adapter - Use only if your antenna has a Motorolatype plug.
Summary of Features
The BC350A is a compact mobile/base scanner, and one of the most advanced communication products available today. The BC350A features:
Super Turbo Scan* This lightning-fast technology enables the BC350A to scan and search nearly 100 channels or steps per second. The BC350A scans about five times faster than any standard scanner sold in the United States. Because the frequency coverage within the service banks is so large (see below), a very fast scanning system is essential. That is why we combined our latest technology-- Super Turbo Scan-- into the BC350A.
*Super Turbo Scan: US patent pending
Six Banks Five pre-programmed Service banks and one standard, programmable Private bank. These banks include: 739-frequency (non-erasable memory) Service bank with 20 additional programmable channels. FIRE/EMG: 97-frequency (non-erasable memory) Service bank with 10 additional programmable channels. 1,160-frequency step (non-erasable memory) AIR: Service/Search bank which covers the complete AIR band, 108.000 to 136.975MHz. 90-frequency (non-erasable memory) Service MRN: bank for all Marine channels. 7 frequency (non-erasable memory) all NOAA WX: Weather Service Broadcasting bank. PRIVATE: 20-channel, fully user-programmable bank. POLICE:
11 Search Bands: Use the [BAND] key to select a band to search.
Band 29 - - - - - - - - - - - 512 Frequency Coverage 29.000 to 30.000 MHz 30.000 to 50.000 MHz 50.000 to 54.000 MHz 108.000 to 136.975 MHz (AM) 137.000 to 144.000 MHz 144.000 to 148.000 MHz 148.000 to 174.000 MHz 406.000 to 420.000 MHz 420.000 to 450.000 MHz 450.000 to 470.000 MHz 470.000 to 512.000 MHz Steps 5kHz 5kHz 5kHz 25kHz 5kHz 5kHz 5kHz 12.5kHz 12.5kHz 12.5kHz 12.5kHz
Installing the BC350A
For Home Use (Desktop Installation)
1. Insert the DC plug end of the AC Adapter into the DC 13.8V jack on the rear panel. 2. Plug the AC Adapter into a standard 120V AC wall outlet. Warning: Do not plug the AC Adapter into an outlet controlled by a wall switch. This could cause scanner memory loss. 3. Plug the Telescoping Antenna into the ANT connector. Extend the antenna to its full height. For frequencies higher than 406 MHz, shortening the antenna may improve the reception. 4. Use the desktop stand for a better viewing and operating angle. Helpful Hints If strong interference or electrical noise is received, relocate the scanner or its antenna away from the source. If you are operating the scanner in a fringe area or need to improve reception, use an optional antenna designed for multi-band coverage. (You can purchase this type of antenna at a local electronics store.) If the optional antenna has no cable, use 50-70 ohm coaxial cable for lead-in. A mating plug may be necessary for the optional antennas.
For Mobile Use (In-Car Installation)
Mounting the Radio 1. Select an ideal location in your vehicle to mount the BC350A. Avoid a location that could interfere with your driving. In a passenger car, the ideal location is underneath the dashboard on the passenger side. 2. Use the BC350A mounting bracket as a template for marking the location of the mounting screws. Note: If there are screws already holding the dashboard, you can use the same screw holes to mount the bracket. 3. Drill the necessary holes and secure the mounting bracket in place using the screws provided. 4. Mount the radio to the bracket only after the wiring has been connected to the rear panel.
Connecting the Antenna Plug Connect the mobile antenna plug (optional) into the ANT connector on the rear panel. (For more information on antenna installation, please refer to the instruction guide that came with your antenna.) Connecting the Power Cord
Note: If you are not experienced in connecting accessories to the vehicle fuse box, please see your automotive dealer for advice on proper installation.
Installation for everyday use: 1. Check the vehicle battery connections to determine which battery terminal (positive or negative) is grounded to the engine block or chassis. Most of todays vehicles use a negative ground. If your vehicle has a negative ground, follow Steps 2 and 3. Otherwise, skip to the note following Step 3. 2. Connect the RED wire of the DC power cord to the accessory contact in your vehicles +13.8 VDC fuse box. 3. Connect the BLACK wire of the DC power cord to the negative side of the vehicle (usually the chassis). Note: In vehicles with a positive ground, the RED wire connects to the chassis and the BLACK wire connects to the accessory contact in the fuse box. 4. Insert the DC plug into the DC 13.8V jack on the back of the scanner. Installation for Temporary Use: A Cigarette Lighter Power Cord is provided for easy, temporary installation. Warning: Do not use the cigarette lighter power cord in a positive ground vehicle. Plug one end of the Cigarette Lighter Power Cord into the cigarette lighter jack and the other end into the DC 13.8V jack on the back of the scanner.
Controls and Functions
Front Panel [HOLD] KEY Press [HOLD] to stop scanning or searching. Press any bank key or [SEARCH] to deactivate Hold Mode. In the Hold Mode, [UP] and [DOWN] are active.
[UP] & [DOWN] KEYS These keys are used in several different ways: To manually step up or down a frequency in any Hold Mode, use [UP] or [DOWN]. Frequency steps are all preset for each band (see Technical Specifications).
To change the direction of the search during Search Mode, press [UP] to search upward to a higher frequency, or [DOWN] to search downward to a lower frequency. To rapidly search or scan frequencies/channels upwards or downwards, press [UP] or [DOWN] for more than one second. To stop the search/scan, release the key.
[PRIVATE] KEY Use [PRIVATE] to instantly access your private collection of favorite frequencies. You can program up to 20 channels in the PRIVATE bank. There are no pre-programmed frequencies in this bank. After programming, press [PRIVATE] to activate PRIVATE scan. In the PRIVATE Scan Mode, press [HOLD] to stop scanning. Then use [UP] or [DOWN] to step through all 20 channels manually (including Locked Out channels).
Press [FIRE/EMG] to start scanning fire and emergency frequencies. The FIRE/EMG bank already has 197 pre-programmed frequencies. They are used for fire department and emergency communications, including paramedics. Because new frequencies may be activated in your local area, ten extra open channels in this bank have been provided for programming additional frequencies. (See the programming procedures for programming new frequencies into this bank.) The AIR band bank key is fully pre-programmed (108.000 to 136.975 MHz). Press [AIR] to start searching through all 1,160 frequency steps of the AIR band. Press [POLICE] to start scanning police frequencies. The POLICE bank contains over 700 known frequencies used by the police, including state troopers, local police and sheriff, etc. For new frequencies, 20 more channels in this bank have been provided for you to program. (See the programming procedures for storing new frequencies into this bank.) Seven NOAA frequencies are programmed into the Weather (WX) bank. Press [WX] to find your local weather channel. All 90 marine channels are programmed into the Marine (MRN) bank. Press [MRN] to start scanning marine channels. Press [SEARCH] to start searching active frequencies within the band previously selected with the [BAND] key. Normally, the search continues from the frequency where it left off in the previous search. In Search Mode, (after pressing [SEARCH]), the [BAND] key becomes active. Use [BAND] to select the band you wish to search. When selecting a band to search, release the key and the scanner will automatically start searching upward from the lowest frequency of its band. (The symbol appears next to "SRCH" on the display.) To search from a higher frequency to a lower frequency, press [DOWN]. (The symbol is now displayed next to "SRCH".
Press [L/O] to "lock out" or prevent scanning of the displayed frequency. [L/O] is active only during opened squelch or in the Hold Mode. Locked out channel can be displayed on the screen by using the [UP] or [DOWN] key to manually scan through the selected bank in Hold Mode only. "L/O" appears on the display to indicate that the channel is locked out. Note: Locking out a channel will not erase the programmed frequency. This key is active in Search Mode only (when "SRCH" is displayed on the screen). When you press [BAND], the upper and lower limits of the band you are searching are displayed for 3 seconds. Then the display returns to the current frequency. Press [BAND] again within 3 seconds to step up one higher band. Press this key as many as it takes to find the band you want to be searched. Important: This key has a very important secondary function. In Program Mode, you can press [BAND] to leave this mode.
This key initiates and completes programming. It is active whenever a steady frequency appears on the display. Press [PROG] to start Programming Mode. "CH" appears and blinks, indicating you are in Programming Mode, and urges you to select the channel of the bank to be programmed. Press a programmable bank key ([PRIVATE], [FIRE/EMG] or [POLICE]) to be programmed. Note: Never press non-programmable bank keys ([WX], [AIR] or [MRN]). If you press one of these keys, "Error" will be displayed, and you may lose the frequency you wanted to program. This control turns the scanner on or off, and also adjusts the volume.
VOLUME Control/ Power Switch
SQ (Squelch) Control Adjust [SQ] to set the scan threshold. When you are monitoring a single channel in Manual Mode, adjust [SQ] to eliminate the background rushing noise heard in the absence of an incoming signal. LCD Display The liquid crystal display (LCD) shows the current channel or its frequency. It also displays the mode indicators, status indicators, and bank indicators. (See the Screens section for more information.)
Rear panel MEMO LOCK Switch In the ON position, the Program ([PROG]) key is disabled. This prevents any unauthorized programming or accidental entries. When programming is disabled, pressing [PROG] emits an error entry tone and displays "PrG-Loc".
ANT. (Antenna) Connector
Connect your Antenna plug here. If you have a Motorola-type plug, use the optional adapter ( PLG 134). EXT. SP. (External Speaker) Connector DC 13.8V Power Connector When using an optional External Speaker system, connect the External Speaker plug here. Connect the DC power cable here. Note: Use only the specified AC Adapter or DC power cord.
The following illustrate some of the screen displays you will use:
PRIVATE POLICE FIRE/EMG WX AIR MRN
L/O MEMO LOSS
HOLD SCAN SRCH
144 - 148
PrG - Loc
You can scan in one of three ways:
Service Bank Scanning Press one of the five service bank keys, [POLICE], [FIRE/EMG], [AIR], [WX] or [MRN], to find an active frequency. Band Search Select a frequency band to search. The Search function is different from scanning. It searches for any active frequency step by step within the lower and upper limits of the band. When an active frequency is found, the scanner will stop and stay on that frequency as long as that transmission lasts. If that frequency is interesting to you, press [HOLD] to hold the frequency in the display. Then program it into one of the programmable banks (PRIVATE, POLICE or FIRE/EMG). If you do not want to program that frequency, press [SEARCH] or just wait till the transmission ends. The search resumes automatically 2 seconds after the last transmission and looks for more active frequencies.
PRIVATE Bank Scanning If you have programmed frequencies into this bank, press [PRIVATE] to scan only those that you have programmed in this bank. When scanning stops on an active frequency, it remains on that channel as long as the transmission continues. When the transmission ends, the scanner will remain on the same channel for 2 more seconds, waiting for a responding transmission. If there is no responding transmission within 2 seconds, the scanning cycle resumes.
The following instructions apply when using your BC350A for the very first time. Each time you turn on the scanner, it always retains the previous settings in its memory. That is, the scanner operates in the mode and bank last used, until you change the settings. Note: In case of memory loss to the scanner (indicated by "MEMO LOSS" on the display), all settings will be lost. Memory loss occurs if the the scanner is left for a long period of time without power. 1. Turn the Squelch [SQ] Control fully clockwise to the end. 2. Power on the scanner by turning [VOLUME] clockwise. Adjust the volume to where you can hear a steady noise. 3. Set the squelch at the scanning threshold by turning [SQ] counterclockwise just until the noise disappears.
4. Press any of the Service bank keys: [POLICE], [FIRE/EMG], [AIR], [WX], or [MRN]. The scanner automatically starts scanning the selected bank. Note: Later, when you have learned how to program channels in the PRIVATE bank, you can press [PRIVATE] to scan your favorite collections. 5. Adjust the volume to a comfortable listening level.
1. Open the squelch by turning [SQ] clockwise to the end. You should hear a steady sound (scanning stops). 2. Turn [SQ] counterclockwise slowly until the sound disappears. This is the threshold point at which scanning starts. At the squelch threshold, an incoming signal just slightly stronger than the noise will open the squelch. Note: When squelch is open, you can hear the voice (scanning is stopped). If squelch is set too tight, that is, too far counterclockwise from the threshold point, a stronger signal is required to open the squelch.
If squelch is set on a point clockwise from the threshold, you will hear a constant sound (noise, if no signal is present). The scanner will not scan.
Before you can scan the PRIVATE bank, you must program the channels. You can program one frequency per channel. Press [PROG] to start the Program Mode and also to complete the programming. If you do not want to finish programming, press [BAND] to leave the Program Mode. You can program any displayed frequency on the screen. If you do not know any local frequency to program, find an active frequency by scanning any service bank or searching any selected band. Then, when you find a desired frequency, program that frequency to the PRIVATE bank. Note: It is recommended that you do not program a Weather frequency into the PRIVATE bank.
You can also program a non-active frequency. If you known a local frequency, press [SEARCH]. Then press [BAND] to select the band which covers that frequency. When the search is near the frequency you want displayed on the screen, press [HOLD] to stop searching. Then use [UP] or [DOWN] to display the frequency you want to program.
Example 1: Programming from SCAN mode.
When you find an interesting active police frequency while searching 144 - 148 band, and want to program it into POLICE bank.
HOLD icon appears in the display.
PO LI CE
CH appears & blinking to indicate that you are in the programming mode.
Pr ess: POLICE icon appears in the display. 2 screens flip-flops to indicate that channel 1 is available to be programmed
to end programming.
to escape from programming mode before step 4.
Pr ess: POLICE icon appears in the display. 2 screens flip-flops to indicate that channel 1 is available to be programmed.
Example 2: Programming from SEARCH mode. Example 3: Programming "000.0000" (Erase programmed frequency in a channel).
You can erase a programmed frequency in a channel by programming "000.0000" into its channel. You can find and display "000.0000" on the screen in one of two ways: Find an open channel in the private bank. Press [PRIVATE] then [HOLD], and use [UP] and [DOWN] to scroll through the bank to find an open channel, "000.0000" - OR Find "000.0000" from the Search & Program Mode. Every search band has one "000.0000" display included between the band limits. It can be displayed only in the Program Mode (after pressing [PROG] and "CH" is blinking in the display).
Example: To find "000.0000" in Search Band 50 - 54.
1. Select Search Band 50 - 54 by pressing [BAND] in the Search Mode. 2. Press [HOLD] to stop searching. 3. Press [PROG] to go into Program Mode. 4. Use [UP] and [DOWN] to display "50.0000" or "54.0000". 5. Press [DOWN] one time at the "50.0000" screen to display "000.0000" - OR Press [UP] one time at the "54.0000" screen to display "000.0000".
Example 4: Erasing a programmed frequency in Channel 13 of the PRIVATE bank.
Program Lock Feature
The BC350A has a program lock feature [Memory Lock] to prevent accidental programming entries or unauthorized programming. Simply turn on the MEMO LOCK switch on the rear panel to disable [PROG] and protect the memory.
Channel Lock Out
You can lock out a channel so it is not scanned. This does not erase the frequency from the channel when it is locked out. You can lock out all the channels in a bank, if desired. However, if you do, pressing that bank key will emit an error tone and the scanner will not scan. In the POLICE bank, MRN bank, or FIRE/EMG bank, you can lock out all the factory pre-programmed channels (those frequencies that display without channel numbers in Scan Mode). This enables you to make a secondary private bank, if desired. You cannot lock out any frequency in the WX or AIR banks. These banks are frequency search banks, and you cannot lock out any frequency in Search Mode. [L/O] is active only when squelch is opened (scan is stopped) or in Hold Mode.
Locking Out an Unwanted Channel
In Scan Mode, press [L/O] when the scanner stops on a channel you do not want to hear. The scanner locks out that channel and immediately advances to the next channel to resume scanning. In Scan/Hold Mode, press [L/O] to lock out the displayed channel/frequency. In this case pressing [L/O] will not advance to the next channel. "L/O" will appear on the screen to indicate that the displayed channel is locked out.
Searching for Locked Out Channels
In Scan Mode, you will not see locked out channels. However, to search for locked out channels and display them on the screen, use [UP] and [DOWN]. These keys will enable you to search manually through the bank in Hold Mode only. "L/O" will appear on the screen to indicate the locked out channel.
Restoring a Locked Out Channel
Suppose you want to unlock Channel 12 of the PRIVATE bank. Press [PRIVATE] to start scanning. Press [HOLD] to stop scanning. ("HOLD" & "SCAN" must appear on the screen.) Use [UP] or [DOWN] to find locked out Channel 12 (which shows "L/O"). Then press [L/O]. "L/O" disappears to indicate that Channel 12 is now unlocked and restored for scanning.
Restoring All Locked Out Channels
You can unlock all locked out channels in any bank at one time. To do this, first press a bank key to start scanning. Then press [HOLD] to stop scanning. Press and hold down [L/O] ("L/O" appears on the screen) for more than 2.5 seconds until you hear the multi-beep ("L/O" disappears). Now all locked out channels in the bank are unlocked and restored for scanning.
A Word About Memory Back-up
Your BC350A has a convenient type of memory back-up system. In the event of a power failure, the scanner provides approximately 30 days of memory retention so you dont immediately lose the frequencies you stored in any of the channels.
To start scanning, press any bank key. When the BC350A is scanning, you can see the "SCAN" message moving across the display. Scanning stops on any active channel automatically and displays its frequency, except those channels programmed with L/O (Lock Out). Scanning resumes automatically two seconds after the channel becomes inactive. To stop scanning at any time, press [HOLD]. When you press [HOLD], you are in the Scan/Hold Mode. The scanner remains on the displayed channel until you press any bank key again to resume scanning. (Or, you can press [SEARCH] to start searching.) In the Scan/Hold Mode, each time you press [UP] or [DOWN], you step up or down one channel at a time (one frequency step each for the AIR or WX bank). Press and hold [UP] or [DOWN] to rapidly step through that bank. In the Scan/Hold mode, you do not skip a locked out (L/O) channel using [UP] or [DOWN].
Weather Channel Scan
The BC350A allows you to search for your local NOAA weather channel. Press [WX] to find the active weather channel in your area from 7 pre-programmed NOAA channels. To exit Weather Mode, press any other bank key or [SEARCH]. It is possible that your area is covered by more than one weather station. When you press [WX], the BC350A will find an active broadcast immediately. If the broadcast sounds weak and distant, press [WX] again to look for a closer station. Note: All weather channels transmit continuous broadcasts. Once the Weather scan stops on a transmission, it will remain on that channel. Weather scan will not resume automatically. You must press [WX] again to reactivate scanning. In some parts of the country, you may not be able to monitor weather broadcasts, such as in low-lying areas. Normally a higher location will improve the reception. Note: It is not recommended to program a weather frequency into any banks. Because weather channels transmit continuously, the scanner will stop on that channel, disrupting the scanning cycle. The Weather Scan feature was provided specifically to avoid this occurrence.
General Use Turn the scanner off before disconnecting the power. Always write down the programmed frequencies in the event of memory loss. If memory is lost, simply reprogram each channel. The display shows "MEMO LOSS" when memory is lost. Always press each keypad button firmly until you hear the entry tone for that key entry. Location If strong interference or electrical noise is received, relocate the scanner or its antenna away from the source of the noise. A higher elevation, if possible, may provide better reception. You might also try changing the height or angle of the telescoping antenna. Do not use the scanner in high-moisture environments such as the kitchen or bathroom. Avoid placing the unit in direct sunlight or near heating elements or vents. Do not plug the scanner into an outlet controlled by a wall switch as prolonged periods without power will cause scanner memory loss. Cleaning Disconnect the power to the unit before cleaning. Clean the outside of the scanner with a mild detergent. To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub the LCD window. Do not use excessive amounts of water. Repairs Do not attempt any repair. The scanner contains no serviceable parts. Contact the Uniden Customer Service Center or take it to a qualified repair technician. Birdies
All radios are subject to receiving undesired signals or birdies. If your scanner stops during SEARCH mode and no sound is heard, it may be receiving a birdie. Birdies are internally-generated signals inherent in the electronics of the receiver. If the interference is not severe, you might be able to turn [SQ] counterclockwise to cut out the birdie. Or, press [SEARCH] to resume searching. (Known birdie frequencies for the BC350A are: 31.200, 41.600, and 52.000 MHz)
If your BC350A is not performing properly, try the steps listed below. PROBLEM
Scanner wont work
SOLUTION *Applies to mobile installation only Check the connections at both ends of the AC
Turn on the wall switch of your room. You
could be using an outlet controlled by the wall switch. Move the AC Adapter to another wall outlet. Check the connections at both ends of the DC cord or cigarette lighter cord. Check to see if the fuse is blown. If the fuse is blown Make sure the ignition key is at the Accessory position. Make sure the power switch is turned on.
* * * *
Check the antenna and its connection. When you are using a telescoping antenna You may be in a fringe area. This may require
an optional multi-band antenna. Check with your dealer or local electronics store. Check and adjust
Scan wont stop.
Check and adjust Squelch (see "Adjusting the
Squelch"). Check the antenna connection.
Uniden DOES NOT represent this unit to be waterproof. To reduce the risk of fire or electrical shock, DO NOT expose this unit to rain or moisture.
NOTE: The installation, possession, or use of this scanning radio in a motor vehicle may be prohibited, regulated, or require a permit in certain states, cities, and/or local jurisdiction. Your local law enforcement officials should be able to provide you with information regarding the laws in your community.
Uniden is a registered trademark of Uniden America Corporation. Bearcat is a registered trademark of Uniden America Corporation.
One Year Limited Warranty
WARRANTOR: UNIDEN AMERICA CORPORATION (UNIDEN) ELEMENTS OF WARRANTY: UNIDEN warrants, for one year, UNIDEN Scanners
(hereinafter referred to as the Product) to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty shall terminate and be of no further effect one
(1) year after the date of the original purchase of the Product or at the time the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, (C) improperly installed, (D) repaired by someone other than warrantor for a defect or malfunction covered by this warranty, (E) used in a manner or purpose for which the Product was not intended, or (F) sold by the original purchaser.
STATEMENT OF REMEDY: In the event that the Product does not conform to this warranty at any time while this warranty is in effect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its authorized service centers in connection with the performance of this warranty. THE ONE YEAR LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. This warranty is void outside of the United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in this operating guide in the Troubleshooting section, you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging) and include a note describing the defect that has caused you to return it. The Product (with evidence of original purchase) should be shipped or delivered (by UPS or insured parcel post), freight prepaid, to warrantor at: Uniden America Corporation Parts and Service Division 8707 North By Northeast Blvd. P.O. Box 501368 Indianapolis, IN 46250 (317) 842-2483 (Monday through Friday, 8:00 AM to 5:00 PM EST). PATENTED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENT NUMBERS:
3,961,261 3,996,521 4,092,594 4,157,505 4,409,688 4,888,815 DES 253,173 3,962,644 3,996,522 4,100,497 4,179,662 4,455,679 4,932,074 3,974,450 4,000,468 4,114,103 4,219,821 4,461,036 4,947,456 3,974,452 4,027,251 4,123,715 4,270,217 4,521,915 5,014,348 3,987,400 4,057,760 4,156,193 4,398,304 4,627,100 RE 31,523
OTHER U.S. AND FOREIGN PATENTS PENDING
1992 Uniden America Corporation. All rights reserved. Printed in the Philippines
Online PRO G2412HD Instruments Phep Smart TEC CR-8530 TL 600 Motorola I335 Elna 7300 Mods Xtc 1400 MDR-NC33 SD-10G HQ7850 SC-EH60 IM Plus Software FP38X 540 CAU PW-LT220 Sd ED KX-TG7120SP LE37S8 CF-20E60 X2500 System 40R86BD 3-device LF-B10 P5GC-MX RX620 HRS-8 UX-177A E360D Optima Scanner MES-330 E-2004 MP14NE Strd390 MEH-P5000R Audi S6 KX-TG5653 157-4 Laserjet 4100 Wireless PAD PET835 W2261VP Delta NEW ATA 172 KF-50XBR800 Mower CDR-D651 SV0802N Digital SF-9700 CDP-997 Chronographstopwatch RKK 500 DVD-LX8 Bridge 3000 KX-TC1711B Logano G115 Optimo DUO Xperia X1A DVD-V440 HBH-660 Camera DCR-TR7100E LS-F1260HL URC22D IC-A24 CDM 700 GR-DX55E AX-X1 F1425 CQ-R263H DKU-5 VGN-N31s-W Server Battery Pack ATS-606A PX-AV100U KDL-32XBR9 LA37S71B TX-28CK1F System CQ-RDP965 Condemned PRO 4880 Basic KIT PC585 AR-200 LAV76630-W KX-TD1232NE HBH-PV703 MAX-B450 Nuvi 670 AND Bass Dummy VSA-AX10 14-20 KW 5 PRO
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101