Reviews & Opinions
Independent and trusted. Read before buy Uniden Dect2060!

Uniden Dect2060

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Uniden Dect2060, size: 3.9 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Uniden Dect2060Uniden DECT 2060-2 Cordless phone

Uniden - 1-line - With Speakerphone - With LCD Display - With Conference Calling - With Voicemail

DECT2060-2 unifies DECT 6.0 Compact Cordless Phone with Caller ID and Extra Handset and Charging Cradle. Utilizing the newly ratified DECT 6.0 frequency band, this phone provides the clearest voice reception available and can easily be used with Wireless Home Networking (WLAN) systems without negative impact. This phone offers state-of-the-art technology that provides brilliant sound and maximum voice security without interference from other wireless devices.

 

[ Report abuse or wrong photo | Share your Uniden Dect2060 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
imtheeonlyone 12:48am on Sunday, October 3rd, 2010 
Good Phone Until the Buttons Stop Working I have purchased this same model of phone twice. When the caller ID, quick dial.
Mac 7:15am on Sunday, September 19th, 2010 
Call me anytime. I have had several different phones in the past few years. This has to be one of the better ones. No static, great tone.
marcelolaia 12:40pm on Thursday, August 12th, 2010 
Not purchasing again We bought this set brand new, and when we received it we noticed the base station was not functional. Worst cordless ever This is the worst cordless phone I ever had. This phone keep on going OUT OF RANGE!!!
thelusiv 9:53pm on Tuesday, August 3rd, 2010 
great phone Comfortable Handset, Compact design, Easy To Set Up, Good Sound, Good Speakerphone, Nice Features, Strong Signal, Wide Range

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Table of Contents
Welcome... 4. Accessibility.. 4 Terminology Used in this Manual.. 5 Manual Conventions.. 5 Product Overview.. 6 Features... 6. Parts of the Phone.. 7 Using the Interface.. 9 Reading the Display.. 9. Using the Four-way Function Key.. 10 Using the Handset Menus.. 10 Entering Text from Your Handset.. 11 Installing the Phone... 12 Choosing the Best Location. 12 Installing the Battery.. 13 Installing the Belt Clip.. 14 Connecting the Base and Charging the Handset. 14 Connecting to the Phone Line.. 15 Changing the Dial Mode... 15 Wall Mounting the Base.. 16 Basic Setup... 17 Selecting a Language.. 17. Activating Personal Ring.. 17. Activating the Key Touch Tone.. 18 Expanding Your Phone... 19 Adding Accessory Handsets.. 19 Using Multiple Bases... 20 Setting Up the Phonebook.. 22. Creating Phonebook Entries.. 22 Finding a Phonebook Entry. 23. Editing an Existing Phonebook Entry. 23 Storing Caller ID or Redial Numbers in the Phonebook... 24 Deleting Phonebook Entries.. 24 Copying Phonebook Entries to Another Handset. 25 Using the Voice Mail Service.. 26 Setting the Voice Mail Signaling Tone. 26. Programming One-Touch Voice Mail Access.. 27. Resetting the Voice Mail Waiting Indicator. 27
Customizing Your Phone.. 28 Changing the Handset Banner. 28 Selecting a Ring Tone.. 28. Activating AutoTalk.. 29 Activating Any Key Answer.. 29 Using Your Phone... 30. Making a Call from the Phonebook.. 31. Chain Dialing from the Phonebook.. 31 Switching to the Handset Speakerphone. During a Call... 31 Using Caller ID, Call Waiting, and Redial Lists. 32 Using the Caller ID List.. 32 Making a Call from a Caller ID Record. 32 Deleting Caller ID Numbers. 33. Using Call Waiting.. 33 Redialing a Number.. 33 Deleting a Redial Record.. 34 Adjusting the Ringer, Earpiece and Speaker Volume.. 34. Adjusting the Ringer Volume.. 34 Adjusting the Earpiece Volume. 34. Adjusting the Speaker Volume.. 34 Adjusting the Audio Tone.. 35
Finding a Lost Handset.. 35. Using Hold, Conference and Transfer.. 35 Placing a Call on Hold.. 35 Conferencing... 36 Transferring a Call.. 36 Using Special Features... 37 Privacy Mode... 37. Using the Intercom.. 37 Muting the Ringer (One call only).. 38 Muting the Microphone.. 38 Seven-Digit Dialing.. 38. Tone Dialing Switch Over.. 39 Line Mode Setup (Base only).. 39 Installing the Optional Headset. 39 Maintenance.. 40. Specifications... 40. Battery Replacement and Handling.. 40 Cleaning the Battery Contacts.. 41 Low Battery Alert.. 41. Battery Life.. 41 Power Failures... 41
Troubleshooting.. 42 Resetting the Handset.. 42 Resetting the Handset Without the Base. 43. Traveling Out of Range... 43 Common Issues.. 44. Liquid Damage.. 46 Precautions!... 47 Rechargeable Nickel-Metal-Hydride Battery. Warning.. 47 The FCC Wants You To Know. 48 I.C. Notice... 49 One Year Limited Warranty.. 50. Index... 51 At Uniden, well take care of you!.. 54

Welcome

Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. As an Energy Star Partner, Uniden has determined that this product or product models meets the Energy Star guidelines for energy efficiency. Energy Star is a U.S. registered mark. Uniden is a registered trademark of Uniden America Corporation.

Accessibility

Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Unidens products can accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314. Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under the Accessibility link. If your call is received outside of our business hours, you can leave us a message and we will call you back.
Terminology Used in this Manual
Standby CID CID/CW or CIDCW Base Charger Accessory Handsets Global Settings Talk The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. Caller ID is available from your Telephone provider and is offered to users on a subscription basis. With this service, you will be able to see the incoming caller information such as name and phone number. Caller ID with Call Waiting is available by subscription from your Telephone provider. With this service, you will be able to view incoming caller information while on a call with another user. The main part of the phone that connects to your phone line and lets you make and receive calls. A cradle that comes with an accessory handset and charges the handset battery. It connects to power but does not connect to a phone line. Additional handsets that can register to the base, allowing you to add handsets without connecting another phone line. This base supports a total of six cordless handsets; see page 19 for Compatible Handsets. This term relates to feature settings that will apply to all registered handsets and the base. These features are available by selecting "GLOBAL SETUP" in the handset menu. Only one handset can change global settings at a time, and you have to make sure the phone is not currently being used. If you have multiple bases, the different bases have each global settings; select the base before changing the global setting (see Selecting the Base on page 21). A telephone line has been activated on the handset or base, enabling a dial tone.

Manual Conventions

This manual uses several different type styles to help you distinguish between different parts of the phone: Bold text with [ ] indicates a key or button on the phone ALL CAPITALS indicates text on the display, such as menu options, prompts, and confirmation messages lower case bold text indicates a status light on the phone ALL CAPITALS BOLD indicates a connection jack on the base or charger

Product Overview

Features
1.9GHz DECT6.0 Expandable System Expands up to 6 Handsets Caller ID/Call Waiting Store 30 Caller ID Numbers Advanced Phonebook Features: Store 70 Phonebook Entries Alphabetical Search Personalized Ring by Party Transfer Single Listing or Entire Phonebook Speakerphone on Handset 7 Ringer Options on Handset (3 Tones/4 Melodies) Last 5 Number Redial Bilingual Menu Displays. (for US models: English and Spanish,. for Canadian models: English and French) Call Transfer Conferencing Intercom

Parts of the Phone

Handset
The following illustrations show you all of the different parts of your phone. 2. 3. 4. 5. 6. 7. 8. 9. 0. 2. 3. 4. 5. 6. 7. 8. 9. 20. 2. 22. Headset jack cover Belt clip hole Speakerphone speaker and ringer Handset battery compartment new message LED Handset earpiece LCD display [Clear/Intcom] key [ ] key (up) [ /Flash] key (talk/flash) [ ] key (phonebook/left) [ /tone] key [Redial/Pause] key [Menu/Select] key [ /Mute] key (messages/mute) [ ] key (caller ID/right) [ ] key (end call) [ ] key (down) [#] key [ ] key (speaker) Handset microphone Handset charging contacts
25 23. 24. 25. 26. 27. Base charging contacts charge LED [find hs] key (find handset) DC IN 9V jack TEL LINE jack

Using the Interface

Reading the Display

Icon Status

The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean.

Description

Standby/Talk The battery icon indicates the handset battery status: full, medium, low, and empty.

Standby Talk Talk

The ringer off icon indicates that the ringer is turned off. The mute icon appears while the handset microphone is muted. The speaker icon appears when the handset speaker phone is in use. The privacy icon appears when the Privacy Mode is turned on. The voice mail icon appears when you have messages waiting in your voice mailbox.

Talk Standby

The Standby Screen
When the phone is in standby, the handset display shows the following items:

Ringer off icon (when the ringer is off) battery icon Handset ID Number of new Caller ID calls received
Using the Four-way Function Key
Your handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook. Move the key to the right to access Caller ID information. To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves and operates.
View the phonebook Four-way Function Key Down

View the Caller ID

To open the menu, press [Menu/Select]. Highlight the option you want by pressing the four-way function key. This will move the cursor; the option currently highlighted has a triangle beside it. Activate the highlighted option by pressing [Menu/Select]. To go back to the previous screen, press [left] on the four-way function key. To exit the menu and return to standby, press [ ]. If you do not press a key within thirty seconds, the phone will time out and exit the menu. Note: For GLOBAL SETUP menu options, make sure the line is not in use and the handsets are within range of the base.

Using the Handset Menus

You can use the number keypad on your handset to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, and then the number on the key. If two letters in a row use the same number key, enter the first letter, then use [right] on the four-way function key to move the cursor to the next position to enter the second letter. For example, to enter the word Movies: ) Press [6] once to enter M. 2) Use [right] on the four-way function key to move the cursor to the right. 3) Press [6] six times to enter o. 4) Press [8] six times to enter v. 5) Press [4] six times to enter i. 6) Press [3] five times to enter e. 7) Press [7] eight times to enter s. 8) Press [Menu/Select] to end your text entry. If you make a mistake while entering a name, use [right] or [left] on the fourway function key to move the cursor to the incorrect character. Press [Clear/Intcom] to erase the wrong character, and then enter the correct character. To delete all characters, press and hold [Clear/Intcom]. Note: When you enter the text, you can also use [#] to move the cursor to right and [ /tone] to move the cursor to left.
Entering Text from Your Handset

Installing the Phone

Choosing the Best Location

Route the cord.

3) 4) 5)
To AC outlet AC adapter (supplied) To DC IN 9V
Connecting to the Phone Line
) Once the battery pack is fully charged, route the telephone cord through the LOOP of bases back as shown, and connect the telephone cord to the TEL LINE jack. 2) Connect the telephone cord to a telephone wall jack.

Testing the Connection

Try making a call. If your call does not connect or you cannot get a dial tone, try the following steps: ) Make sure the AC adapter cord is securely connected to the DC IN 9V jack and a standard power outlet. 2) Check to make sure the battery is fully charged. (If you dont see the battery full icon, check to make sure the battery is properly connected). 3) Change the dial mode.
To telephone wall jack Telephone cord (supplied) To TEL LINE
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phones dial mode. If you dont get a dial tone or cant connect to the telephone network, please follow the steps below to modify your phones settings: ) Press [Menu/Select]. Select the GLOBAL SETUP menu, and then the Dial Mode DIAL MODE submenu. Tone 2) Scroll [ ] to highlight PULSE. Pulse 3) Press [Menu/Select]. You will hear a confirmation tone. If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select TONE in step 2. Note: If you have multiple bases, select the base before changing the dial mode (see Selecting the Base on. page 21).

Changing the Dial Mode

Wall Mounting the Base
This phone can be mounted on any standard wall plate. Snap the wall mount adapter into the notches on the bases back. Plug the AC adapter into the DC IN 9V jack. Plug the AC adapter into a standard 120V AC wall outlet. Plug the telephone cord into the TEL LINE jack. Route the telephone cord through the hole of the wall mount adapter as shown. 6) Plug the telephone cord into the telephone wall jack. 7) Align the mounting slots on the base with the mounting posts on. the wall. Then push in and down until the phone is firmly seated. ) 2) 3) 4) 5) Notes: DO NOT use an AC outlet controlled by a wall switch. To mount the phone directly on the wall, insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 15/16 inches apart; leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone. Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for the wall material. No need to route the telephone cord through the hole of the wall mount adapter when mounting directly on the wall.

You can delete a single phonebook entry at a time or all phonebook entries at once: To delete a single phonebook entry: ) When the phone is in standby, press [ ]. 2) Find the entry that you want to delete and press [Menu/Select]. 3) Select DELETE. DELETE ENTRY? appears in the display. 4) Move the cursor to select YES. 5) Press [Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display. To delete all phonebook entries: ) When the phone is in standby, press [ ]. 2) Press [Menu/Select], and then select DELETE ALL. DELETE ALL? appears in the display. 3) Move the cursor to select YES. 4) Press [Menu/Select]. You will hear a confirmation tone, and DELETED!. appears in the display.
Deleting Phonebook Entries
Copying Phonebook Entries to Another Handset
If you have more than one handset, you can transfer phonebook entries from one handset to another without having to re-enter names and numbers. You can transfer one phonebook entry at a time or all phonebook entries at once. ) When the phone is in standby, press [ ]. 2) To copy one entry, find the phonebook entry you want to copy. Press [Menu/Select], and then select COPY. To copy all entries, press [Menu/Select], and then select COPY ALL. 3) Move the cursor to select the handset which you want to transfer the entries to and then press [Menu/Select]. If you select COPY ALL, ARE YOU SURE? appears on the display screen. Move the cursor to select YES, and then press [Menu/Select]. 4) The phonebook entries will be transferred to the designated handset. During the copy process, the receiving handset shows RECEIVING and the Handset ID of the sending handset. 5) When the transfer is completed, DONE! appears on the handset.
Notes:The handsets must be currently connected to the same base (see page 21). If your phonebook contains seventy entries, you cannot store any new phonebook entries. You will hear a beep, and NOT ENOUGH MEMORY IN RECEIVING UNIT appears on the display. If the selected handset is out of range or data transfer is cancelled, UNAVAILABLE appears in the display. Phonebook listings will not be transferred.
If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message LED on the handset flashes and appears in the handset display whenever you have messages waiting in your voice mailbox. If you have programmed your access number into your phone, you can simply press [ /Mute] to access your voice mail. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone.

Using the Voice Mail Service
Setting the Voice Mail Signaling Tone
Your telephone service provider should provide you with the specifics of your voice mail service upon your enrollment. If you are having trouble with your message waiting indicator on your phone not illuminating when you have waiting messages, you will need to contact your service provider and inquire as to which type of message notification signal-either Frequency Shift Keying (FSK) or Stutter Dial Tone (SDT)--their service uses. If your voice mail service uses an FSK message signal to alert you of a new voice mail message, you must turn off the Voice Mail Tone. If your voice mail service uses an SDT message signal to alert you of new voice mail messages, you can leave the Voice Mail Tone on. Follow the instructions below to set up your cordless phone settings: ) Press [Menu/Select]. Select the GLOBAL SETUP menu, and then the VOICE MAIL TONE submenu. 2) Move the cursor to set the voice message indication (SDT message signal) to ON or OFF. 3) Press [Menu/Select]. You hear a confirmation tone.
You can program your voice mail access number to the Voice Mail key [ /Mute] on each handset so you can get your messages at the touch of a button. Your voice mail service provider will supply you with the access number. This number may be simply a phone number. To edit the voice mail number, follow the steps below: ) Press [Menu/Select]. 2) Move the cursor to select the HANDSET SETUP menu and press. [Menu/Select]. 3) Move the cursor to select EDIT VOICE MAIL and press [Menu/Select]. 4) Enter your personal access number (up to twenty digits). 5) If you need to have the phone wait before sending the next digits, press [Redial/Pause] to insert a two-second pause in the dialing sequence. For a longer pause, press [Redial/Pause] multiple times. A P appears in the display each time you press [Redial/Pause] and each pause counts as one digit. 6) Press [Menu/Select] when you are finished.
Programming One-Touch Voice Mail Access
When you receive a new voice mail message, the new message LED on the top of the handset flashes and appears in the handset display. In the event your message alert tone gets out of sync with your phone companys voice messaging system, you can reset back to its original no messages waiting state. To reset, press and hold [find hs] on the base for five seconds. A beep sounds and the message alert tone is reset.
Resetting the Voice Mail Waiting Indicator

Customizing Your Phone

Changing the Handset Banner
Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more than one handset, the banner name identifies your handset. ) Press [Menu/Select]. Select the HANDSET SETUP menu, and then the BANNER submenu. 2) Use the keypad to enter or edit the banner name. (See Entering Text from Your Handset on page 11 for detailed instructions on entering text.) 3) Press [Menu/Select]. You will hear a confirmation tone. Note: When you have multiple bases and even if the handset ID is changed when you switch to a different base, the handset will keep the banner name.

) When the phone is in standby, press [ 3) Press [ /Flash] or [ ] to open the phonebook. 2) Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 23). ] to dial the number. Note: You can also press [ /Flash] or [ ] before you open the phonebook. When you come to the phone number you want to dial, press [Menu/Select].
Chain Dialing from the Phonebook
) Dial the number normally. 2) After the call connects, press [ 3) Use [ ] or [ 4) Press [Menu/Select]. ].
You can use the phonebook entries to store a group of numbers (up to twenty digits) that you may need to enter once your call connects.
] to select the phonebook entry that contains the digits you want to send.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press [ normal call, press [ ].
] on the handset. To switch from a speakerphone call to a
Using Caller ID, Call Waiting, and Redial Lists
If you subscribe to Caller ID service from your phone company, your phone will show you the callers phone number and name (if available) whenever a call comes in. If you subscribe to Caller ID on Call Waiting, the phone will also show you the name and the number of any call that comes in while youre on the line. If your telephone provider supports seven-digit dialing, you can save your local area code so it does not display in the Caller ID list. See Seven-Digit Dialing on page 38 for more information.
You can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full, the oldest record will be automatically deleted when a new call is received. To open the Caller ID list, press [ ] (on the right side of the four-way key). The phone will show the number of new Caller ID records and the total number of stored records. Use [ ] and [ ] to scroll through the list.

Using the Caller ID List

Caller ID New : 1 Total:30
Making a Call from a Caller ID Record

) 2) 3) 4)

When the phone is in standby, press [ ] to open the Caller ID list. Use [ ] and [ ] to find the Caller ID record you want to dial. To add (or delete) a 1 to the beginning of the displayed phone number, press [ /tone]. * Press [ /Flash] or [ ] to dial the number.
Note: You can also press [ /Flash] or [ ] before you open the caller ID list. When you come to the phone number you want to dial, press [Menu/Select].
Deleting Caller ID Numbers

To delete only one Caller ID number, press [ ] when the phone is in standby, and then find the number you want to delete. Press [Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES. To delete all the Caller ID numbers, press [ ] when the phone is in standby, and then press [Menu/Select]. When the phone asks you to confirm, select YES. Note: When you delete a Caller ID number, you delete it permanently.
If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will sound. Press [ /Flash] to accept the waiting call. There is a short pause, and then you will hear the new caller. To return to the original caller, press [ /Flash]. Note: You must subscribe to Call Waiting service for this feature to operate. Not all features are available in all areas.

Using Call Waiting

Redialing a Number
You can quickly redial the last five numbers dialed on each handset. ) When the phone is in standby, press the [Redial/Pause] to open the redial list. 2) Use [ ] and [ ] or [Redial/Pause] to scroll through the redial list. 3) When you find the number you want to dial, press [ /Flash] or [ ]. Notes:If the number exceeds 32 digits, only the first 32 digits are retained in redial memory. If the redial memory is empty, EMPTY appears in the display and you will hear a beep. You can also press [ /Flash] or [ ] before you open the redial list. When you come to the phone number you want to dial, press [Menu/Select].

Deleting a Redial Record

If you want to delete a phone number from the handsets redial list, follow the steps below: ) When the phone is in standby, press [Redial/Pause]. 2) Use [ ] and [ ] to scroll through the redial list. 3) When you find the redial number you want to delete, press [Menu/Select] and select DELETE ENTRY. 4) When the phone asks you to confirm, select YES. The redial number is deleted.
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You can choose from four ringer volume settings (off, low, medium, and high) on the handset. With the phone in standby, use [ ] to make the ringer volume louder or [ ] to make it softer or turn it completely off.

Adjusting the Earpiece Volume Adjusting the Speaker Volume
You can choose from six volume levels for the earpiece. To adjust the earpiece volume while on a call, press [ ] (to make it louder) or [ ] (to make it softer).
You can choose from six volume levels for the handset speakerphone. To adjust the speaker volume while on a speakerphone call, press [ ] (to make it louder) or [ ] (to make it softer).

Adjusting the Audio Tone

If you arent satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone. To adjust the audio tone: ) While on a call, press [Menu/Select]. 2) Move the cursor to select AUDIO TONE, and then press [Menu/Select]. 3) Move the cursor to select desired option (HIGH TONE, NATURAL TONE, or LOW TONE), and then press [Menu/Select]. Selected option appears in the display for two seconds, and then the display returns to normal.
To locate a misplaced handset, press [find hs] on the base when the phone is in standby. The handsets connected to the paging base will beep for one minute, and PAGING appears on the handset display. To cancel paging, press [find hs] again or any key on the found handset. Note: Handsets that are not currently connected to this base will not be paged.

Finding a Lost Handset

Using Hold, Conference and Transfer

Placing a Call on Hold

) During a call, press [Clear/Intcom] on the handset to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold. 2) To return to the party on hold, press [ /Flash] or [ ] on a handset. The phone will return to the holding party.
Notes:You can only place a caller on hold for five minutes. Once five minutes has passed, that partys line will be disconnected and the phone will return to standby. While a call is on hold, Caller ID and Call Waiting cannot be received.

Precautions!

Warning!
The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
Before you read anything else, please observe the following: Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local authorities for possible battery disposal instructions. 5. Do not disassemble any component of this product.
Rechargeable Nickel-Metal-Hydride Battery Warning
This equipment contains a rechargeable Nickel-MetalHydride battery. The rechargeable batteries contained in this equipment may explode if disposed of in a fire. Nickel is a chemical known to state of California to cause cancer. Do not short-circuit the battery. Do not charge the rechargeable battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manual. Using another charger may damage the battery or cause the battery to explode.

SAVE THESE INSTRUCTIONS

CAUTION
Rechargeable Batteries Must Be Recycled or Disposed of Properly. Uniden works to reduce lead content in our PVC coated cords in our products and accessories.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not open or mutilate the battery, and disconnect the battery before shipping this product.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the telephone provider. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do not substitute or repair any parts of the device except as specified in this manual. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. This equipment is hearing aid compatible. Should you experience trouble with this equipment, please contact Uniden customer service at 800-297-1023. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended. Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owners manual, could void your authority to operate this product. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCCs exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. The antenna(s) used for the base-unit must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter.

Radio Interference

Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the base not be plugged into a circuit that also powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed. In the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference. If you cannot eliminate this type of interference, you need to change to a different channel. Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.

At Uniden, well take care of you!

Having trouble?

Our customer care specialists are here to help you! Visit our web-site at www.uniden.com or call our Customer Service Hotline at. 1-800-297-1023 during regular business hours.* To order headsets, accessory handsets, replacement batteries, or other accessories, visit our website at www.uniden.com or call. 1-800-554-3988 during regular business hours.* If you need special assistance due to a disability or have questions on the accessibility features of this product, please call. 1-800-874-9314 (voice or TTY).

Need a part?

Help for our customers with special needs
* Central Standard Time. Detailed customer service hours are available at www.uniden.com. May be covered under one or more of the following U.S. patents: 5,426,690 5,434,905 5,491,745 4,797,916 5,650,790 5,660,269 5,661,780 5,663,981 5,754,407 5,758,289 5,768,345 5,787,356 5,893,034 5,912,968 5,915,227 5,929,598 6,070,082 6,125,277 6,253,088 6,314,278 6,782,098 6,788,920 6,788,953 6,839,550 6,953,118 7,023,176 7,030,819 7,146,160 Other patents pending. 5,493,605 5,671,248 5,794,152 5,930,720 6,418,209 6,889,184 5,533,010 5,696,471 5,801,466 5,960,358 6,618,015 6,901,271 5,574,727 5,717,312 5,825,161 5,987,330 6,671,315 6,907,094 5,581,598 5,732,355 5,864,619 6,044,281 6,714,630 6,914,940

 

Technical specifications

General
Product TypeCordless phone w/ call waiting caller ID
Additional Handsets Qty1
Phone Features
Cordless Phone StandardDECT
Max Handsets Supported6
Multi-Handset ConfigurationPhonebook transfer
Max Base Units Supported4
Dialer TypeKeypad
Dialer LocationHandset
Dialing ModesPulse, tone
Conference Call Capability3-way
IntercomYes
SpeakerphoneYes
Caller IDYes
Voice Mail CapabilityYes
Call WaitingYes
Call TransferYes
Call HoldYes
Menu OperationYes
Function ButtonsPulse-to-tone button, speakerphone button, directory button, intercom button, flash button, pause button, mute button, redial button
Volume ControlYes
Ringer ControlYes
Handset LocatorYes
Lighted KeypadYes
Additional FunctionsBuilt-in clock
Additional FeaturesAutotalk, out of range alert
Phone Memory
Phone Directory Capacity70 names & numbers
Dialed Calls Memory10
Caller ID Memory30 names & numbers
Display
TypeLCD display - monochrome
Display LocationHandset
FeaturesBacklit
Miscellaneous
AntennaInternal
Connections1 x headset jack
Power
TypePhone charging stand + power adapter - external
Battery
Battery1 x battery
TechnologyRechargeable - nickel metal hydride
Included Qty1
Talk TimeUp to 960 min
Standby TimeUp to 240 h
Audible Battery AlertYes
Universal Product Identifiers
BrandUniden
Part NumberDECT2060-2
GTIN00050633271131

 

Tags

Galeo 4600 VR140 DVP-NS601HP LC-30HV2E W6661 Bluetooth H700 0 Venture CX BH-100 Stanton SA5 Timer Monitor Easyshare Z650 Deluxe Hdmi Compressor RI7775 TX-29P300X 81664 10 3 A Bois STR-K502 SA-AK110 AX-HC1 128 L Biberons DGS-3450 Music Touch Dual TX-DS696 EL-509WM WS XD-J220 JL-707 Frontman 25R Compressor Review DMC-J3 DX6050 Handset Enregistreur Mp3 LP-M5600F P2501 CDX-GT35U Stylus S21 B3605 Serene 42790 NAD T747 MZ-E33 Taurus-1998 TD5801 CW2403 Photo XD-E500 TC 40 42HF7845 NW-E75 SRS-BTM30 Gt780 HDP-R1 Compressors RK STR-DH510 Basslink SE567 EX100U MDT651S Wt R50 EMP-82 ERG47800 VP-D19 PMR 500 Sdrh85 WJ-MX1200AK AVX-P7650DVD Colorado 2011 EC990SW RZ-15LA31 HTC S620 Contour-1999 P-2602HWL-C 5510V WF9702N3W SP0842N SLV-FX9 FA148CP TM-C100 LN510 Fishmark 500C Vi 1255 32PF3302 DVR 2500 P4S8x-X Tecra A7 EMP-73 CPI 1550 X39 397 TX-SR502E RS-TR474 XEA301 RT-205 CDX-E100 4400F

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101