Uniden DXI5586-2 Manual
Uniden DXI5586-2, size: 708 KB
Uniden - 1-line - With LCD Display
Uniden is creating a World Without Wires. Which means that Uniden is building products that give its customers more freedom to enjoy life, solve problems and always stay connected with others. From cordless phones to two-way radios to radar detectors, the company makes electronic wonders an everyday occurrence. As one of the world's largest manufacturers of cordless phones and consumer communications devices, chances are there's a Uniden product that's already making things more conv... Read more [ Report abuse or wrong photo | Share your Uniden DXI5586-2 photo ]
User reviews and opinions
|sydb||9:07pm on Monday, September 13th, 2010|
|I have had problems with Uniden phones before, so I should not have been so easily seduced by the low price.|
|quiescens||11:55pm on Monday, August 9th, 2010|
|Range is terrible and callers cannot hear us We owned this set for several months, and now are giving it away. Range is terrible and callers cannot hear us We owned this set for several months, and now are giving it away.|
|ardyn||8:14am on Thursday, June 10th, 2010|
|cheap, 2 handsets disconnects mid-call, interference from neighbors cordless phones, only 1 hand-set can be used at once|
|glsarto||3:20am on Thursday, April 22nd, 2010|
|Range is terrible and callers cannot hear us We owned this set for several months, and now are giving it away.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
23 Extra Charging Cradle (for Second Handset)
www.uniden.com CONTROLS AND FUNCTIONS 
Terms Used in this Manual
Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has not been pressed and there is no dial tone. Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone. CID - Caller ID CIDCW - Caller ID on Call Waiting
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and we will call you back. Information is also available on our web site, www.uniden.com, under the "Accessibility" link.
TERMS USED IN THIS MANUAL / ACCESSIBILITY
I N S TA L L I N G T H E PHONE
Installing the Phone
Do the following steps: A. Choose the Best Location B. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets D. Mount the Main Base on a Wall
A. Choose the Best Location
Before choosing a location for your new phone, here are some important guidelines you should consider:
Avoid heat sources, such as radiators, air ducts, and sunlight Avoid television sets and other electronic equipment Avoid noise sources such as a window by a street with heavy traffic Avoid microwave ovens Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Avoid personal computers Avoid other cordless telephones
If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.
Choose a central location
The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch). The main base and each handset should be kept away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting. The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the main base as high as possible. The main base should be placed in an open area for optimum range and reception.
www.uniden.com I N S TA L L I N G T H E P H O N E 
B. Install the Rechargeable Battery Packs into the Handsets
[ 11 ]
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. Make sure the wall material is capable of supporting the weight of the main base and handset. Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the main base will be placed. 1) Insert two mounting screws into the wall (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone. 2) Refer to steps 1 through 6 on page 11 to mount the telephone.
Installing the Beltclip
To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull both sides of the beltclip to release the tabs from the holes.
[ 12 ] I N S TA L L I N G T H E P H O N E www.uniden.com
Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by calling our Parts Department. See page 35.)
Register Handsets to the Main Base before Using!
Whichever handset you choose to charge in the main base will automatically register to the main base. The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps below to register the second handset. 1) Be sure both handsets are fully charged. 2) Remove the handset from the charging cradle, and place it in the main base. The charge/in use LED light on the main base will begin to flash, indicating that the registration is taking place. 3) Wait for at least 5 seconds, then remove the handset from the main base. 4) Press the find hs key on the main base. If both handsets beep, registration is complete. If one handset does not beep, re-register that handset. 5) Once both handsets are registered, it doesnt matter which handset is placed in the main base or the charging cradle.
When you charge the handsets, Caller ID summary screen and the name of the handset, HS1 appears. If HS2 appears, you are charging the handset No. 2.
The charging cradle can be used to charge either handset.
[ 13 ]
When to Re-register Handsets
1) Youll need to re-register the second handset (follow steps on page 13) each time the digital security code is changed. Refer to page 32 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same registration process on page 13. 3) If the second handsets battery becomes very low, the handset must be recharged for 15-20 hours and re-registered to the main base unit.
Make sure to return the handsets to the cradles after each phone call.
[ 14 ]
WHEN TO RE-REGISTER HANDSETS
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Headset 1 shows HS1 in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using either Handset 1 or Handset 2.
AutoTalk allows you to answer the phone simply by removing the handset from the cradle. You do not have to press any keys. 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the select/channel key to turn AutoTalk on. 3) Press the end key to complete the setting. The handset returns to standby mode.
Activating Caller ID on Call Waiting
Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must subscribe to Caller ID service through your local telephone provider to use this feature. 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the M key to select CIDCW.
www.uniden.com BASIC SETUP [ 15 ]
3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to the main base to complete the setting. The handset returns to standby mode.
Entering Your Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your local area code in your phone. If you get a call from within your area code, you'll only see the 7-digit phone number. If you get a call from outside your area code, you'll see all 10 digits. 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the M key twice to select Area Code. 3) Press the select/channel key. If an area code was already stored, the phone will display it. 4) Use the number keys (0 - 9) to enter the 3-digit area code. If you make an error, use the delete/transfer key to backspace. 5) Press the select/channel key. A confirmation tone sounds. 6) Press the end key to complete the setting. The handset returns to standby mode.
If your phone system requires pulse dialing and you need to send the DTMF tones during a call, you can temporarily switch over to tone dialing. (Refer to "Tone Dialing Switch-over" on page 20.)
[ 16 ]
Choosing the Dialing Mode
Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell: try making a call. If your call connects, your phone's setting is fine. If not, follow the steps below:
1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the M key three times to select Dial. 3) Press the select/channel key to set the phone to pulse dialing. 4) Press the end key and return the handset to the main base to complete the setting. The handset returns to standby mode.
Setting the Language
You can change the language the menu display uses. Choose from English, French, or Spanish. 1) When the phone is in standby mode, Press and hold the call id/menu key. The following screen appears. 2) Press the M key four times to select Language. 3) Press the select/channel key to select Eng, Fr. or Esp. 4) Press the end key to complete the setting. The handset returns to standby mode.
Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from. 1) With the phone in standby mode, press the L or M key. 2) The phone will sound the different ring tones at different volumes. To turn the ringer off, select Ringer Off. 3) When the phone sounds the ring tone and volume you wish to use, press the end key.
www.uniden.com BASIC SETUP [ 17 ]
Making and Receiving Calls
Making a call 1) Remove the handset from the cradle. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk/flash key.
To turn on the AutoTalk feature, see "Activating AutoTalk" on page 15.
Receiving a call 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automatically answer the call when you pick it up.) 2) Press the talk/flash key. OR /tone/ , #/ 1) If the handset is off the cradle, press the talk/flash, number key. (AutoTalk is on.) Hanging up Press the end key or return the handset to the cradle.
5/17 12:30PM Jane Smith 214-555-1234
Replace Memory? Yes No
[ 26 ]
Making Calls from Speed Dial Memory 1) Press the memory key. The handset displays your programmed speed dial number. 2) Enter the number (0 - 9), or press the L or M key to select the speed dial number you would like to dial. 3) Press the talk/flash key. Connecting changes to Talk, and the volume setting and the number selected appear on the display. Then the displayed number is dialed.
Select Memory 01 Movies 02 JOHN DOE
To cancel speed dialing Press the end key to cancel speed dialing. The handset returns to standby mode. Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to standby mode.
[ 27 ]
Caller ID and CIDCW (Caller ID on Call Waiting)
You must subscribe to Caller ID services through your local telephone provider to use these features. When the telephone rings, the Caller ID feature allows you to view the callers name, phone number, date and time of call. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the callers name, the callers name appears on the display (up to 15 letters).
The date and time received Caller's name Caller's phone number
If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear. When the call is received via a telephone company that does not offer Caller ID service, the callers phone number and name do not appear. (This includes international calls.) When the call is received via a private branch exchange (PBX), the callers phone number and name may not appear.
[ 28 ]
5/11 12:30PM Jane Smith 214-555-1234
You may receive any one of the following messages: When invalid data is received Incomplete Data When a private name is received Private Name When a private number is received Private Number When an unknown name is received Unknown Name When an unknown number is received Unknown Number
Data errors appear as
CALLER ID AND CIDCW
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You can also view the Caller ID list during a call. 1) Press the call id/menu key. The summary screen displays the number of new messages and total messages. 2) Use the M key to scroll through the messages from the latest to the earliest, or use the L key to scroll through the messages from the earliest to the latest. 3) Press the call id/menu key to return to talk mode, or press the end key to return to standby mode.
Caller ID New :01 Total:02 5/17 12:30PM 03 Jane Smith 214-555-1234
In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the handset returns to standby mode.
Each message can be up to 15 characters for the name and 15 digits for the phone number. The number of calls from the same Caller ID appears next to the received time. Once you view the new message, the number will be cleared and disappear. During a call, don't press the end key, or the call will be disconnected.
[ 29 ]
Deleting Information from the Caller ID List
If the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually.
Deleting a Caller ID message
While using the
Delete All? or Delete Message?
screen, if no key is pressed for more than 30 seconds, an error tone sounds, and the handset returns to standby mode. If you get an incoming call or page, the deleting operation is canceled and you can answer the call or page.
1) Press the call id/menu key in standby mode. Find the message to be deleted from the Caller ID list by pressing the L or M key. 2) Press the delete/transfer key. 3) Press the L or M key to select Yes, and then press the select/channel key.
5/17 12:30PM 03 Jane Smith 214-555-1234 Delete Message? Yes No
Deleting all Caller ID names/numbers
1) With the phone in standby mode, press the call id/menu key. 2) Press the delete/transfer key. 3) Press the L or M key to select Yes, and then press the select/channel key. You hear a confirmation tone and all stored Caller ID messages are deleted.
Caller ID New :01 Total:02
Delete All? Yes No Caller ID Total:00
[ 30 ]
Making a Call from the Caller ID List
You can place a call from the Caller ID list. 1) Press the call id/menu key in standby mode. Select the phone number that you want to dial by pressing the L or M key. 2) To have the phone dial a 1 before the displayed Caller ID number, press 1. To have the phone dial the stored area code before the displayed Caller ID number, press 3. 3) Press the talk/flash key. The displayed phone number dials automatically.
5/17 12:30PM 03 Jane Smith 214-555-1234 Talk 2145551234
You cannot make a call from the Caller ID list if your cordless telephone is connected to a private branch exchange (PBX).
Caller ID on Call Waiting (CIDCW)
With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller ID data is displayed. To accept the waiting call, press the talk/flash key (see page 22).
[ 31 ]
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecure TM (which electronically locks your phone when each handset is in the cradle) and Random Code TM digital security which automatically selects one of over 262,000 digital security codes for each handset and the main base. If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 1) Remove the handset from the cradle. Press and hold the find hs key on the main base. 2) While holding the find hs key, place the handset in the main base, and leave the handset in the main base for more than 3 seconds. 3) Remove the handset from the main base. Then place the second handset in the main base and wait for more than three seconds. No need to holding the find hs key this time. 4) Press the talk/flash key on one handset. Once you make sure Talk appears on the display, press the end key. Then, try with the second handset. If each handset displays Talk, a new security code is set. Otherwise, return to step 1 and try again.
[ 32 ]
C H A N G I N G T H E D I G I TA L S E C U R I T Y C O D E
Note on Power Sources
Low battery alert
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery appears on the LCD and none of the keys will operate. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the cradle for charging.
Information stored in the phone's memory will be retained for 30 minutes after the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the cradle after a telephone call. Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. A replacement battery may be purchased by calling 1-800-554-3988 (Mon - Fri 8 am to 5 pm, CST). Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. Power Failure
During the period that the power is off, you will not be able to make or receive calls with the telephone.
NOTE ON POWER SOURCES
Use only the specified Uniden battery pack (BT-905). Do not remove the battery from the handset to charge it. Never throw the battery into a fire, disassemble it, or heat it. Do not remove or damage the battery casing.
NOTE ON POWER SOURCES [ 33 ]
Talk and Standby Times
With average use, your handset battery provides approximately 6 hours of talk time and approximately 10 days of standby time. When your handsets are not being used and are left off of their charging cradles, the battery will gradually discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced respective to the amount of time the handset is off of the charging cradle.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle. Caution
Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.
[ 34 ]
GENERAL I N F O R M AT I O N
The phone complies with FCC Parts 15 and 68. Operating temperature: -10C to 50C (+14F to +122F) AC Adapter Information (For the main base) (For the charging cradle) AC Adapter part number: AD-314 AD-310 or AD-1010 Input Voltage: 120V AC 60Hz 120V AC 60Hz Output Voltage: 9V DC 350mA 9V DC 210mA Battery Information Battery part number: BT-905 Capacity: 600mAh, 3.6V Frequency 925.181-927.451 MHz 5739.320-5746.130 MHz
To avoid damage to the phone use only Uniden AD-314, AD-310 or AD-1010 and BT-905 with your phone. If the handset is left off the cradle, the actual Talk Mode duration will be reduced respective to the amount of time the handset is off the cradle.
The Caller ID does not display.
Handset No. 1 or No. 2 is not working. Unavailable message is displayed on the LCD screen of the handset.
Make sure the battery pack is connected to the handset and fully charged. Re-register the non-functional handset. Make sure the other handset is not already in use. Both handsets cannot be in talk mode at the same time. Place the handset in the main base for at least 5 seconds to re-register to the main base. Make sure the handset is not too far from the main base when trying to use.
[ 37 ]
Symptom The handset doesnt communicate with the main base or the other handset. No 3- way conversation. Voice Message Indication does not work.
Suggestion Re-register both handsets (see page 13).
Only one handset at a time can talk with an outside caller. To allow the other handset to talk to the caller, transfer the call. Contact your local telephone company to make sure that your telephone receives FSK message signaling. Reset the indicator by pressing and holding the find hs key for 5 seconds.
[ 38 ]
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps. Case
If the handset or base is exposed to moisture or liquid, but it only affects the exterior plastic housing. If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base). Wipe off the liquid, and use as normal.
Handset: 1. Remove the battery cover and leave it off for ventilation. 2. Remove the battery pack by disconnecting. 3. Leave the battery cover off and the battery pack disconnected for at least 3 days. 4. Once the phone is completely dry, reconnect the battery pack and the battery cover. 5. Recharge the handsets battery pack for 20 hours before using again. Base: 1. Disconnect the AC adapter from the base unit, cutting off electrical power. 2. Disconnect the telephone cord from the base unit. 3. Let dry for at least 3 days. IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption. CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline at 1-800-297-1023.
[ 39 ]
Before you read anything else, please observe the following:
Uniden works to reduce lead content in our PVC coated cords in our product and accessories.
Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Cadmium Battery Warning
This equipment contains a rechargeable nickel-cadmium battery. Cadmium is a chemical known to the State of California to cause cancer. The rechargeable nickel-cadmium battery contained in this equipment may explode if disposed of in a fire. Do not short-circuit the battery. Do not charge the rechargeable nickel-cadmium battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owners manual. Using another charger may damage the battery or cause the battery to explode.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible battery disposal instructions. 5. Do not disassemble any component of this product.
Rechargeable Nickel-Cadmium Batteries Must Be Recycled or Disposed of Properly
Uniden voluntarily participates in an RBRC industry program to collect and recycle nickel-cadmium batteries at the end of their useful life, when taken out of service within the United States. The RBRC program provides a convenient alternative to placing used nickel-cadmium batteries into the trash or municipal waste stream, which is illegal in some areas. Through the RBRC program, Uniden makes it easy for you to drop off the used battery at local retailers of replacement nickel-cadmium batteries. You may also contact your local recycling center for information on where to return the used battery. Please call 1-8008-BATTERY for information on Ni-Cd battery recycling in your area. Uniden's involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC is a registered trademark of the Rechargeable Battery Recycling Corporation. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
SAVE THESE INSTRUCTIONS!
CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not open or mutilate the battery, and disconnect the battery before shipping this product.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68
[ 40 ]
P R E C A U T I O N S & WA R R A N T Y
Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications, may not be ensured when using this phone. To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCCs exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private.
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery from the Product and separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. If you have any questions or problems, please do not return this product to the place of purchase. Having Trouble? Our customer care specialists are here to help you! Visit our website at www.uniden.com or call our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone support is closed on holidays.) Need a Part? To order headsets, additional handsets, replacement batteries or other accessories, visit our website at www.uniden.com or call 1-800-554-3988, Mon-Fri, 8 a.m. to 5 p.m. CST. Help for our Special Needs Customers If you need special assistance due to a disability or have questions on the accessibility features of this product, please call 1-800-874-9314 (voice or TTY)
May be covered under one or more of the following U.S. patents: 4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278 6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920 6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940 6,953,118 7,023,176 Other patents pending.
Uniden is creating a World Without Wires. Which means that Uniden is building products that give its customers more freedom to enjoy life, solve problems and always stay connected with others. From cordless phones to two-way radios to radar detectors, the company makes electronic wonders an everyday occurrence. As one of the world's largest manufacturers of cordless phones and consumer communications devices, chances are there's a Uniden product that's already making things more convenient in and around your home. PRODUCT FEATURES: 5.8GHz extended range; Extra handset and charging cradle; Caller ID/Call Waiting - displays the name and number of the caller in Call Waiting even while you are on the phone; Remote message playback; 10 memory dial locations; Ringer options - High/Low/Off; Handset status LED; Last number redial; View stored number during call; New message waiting indication - base only; Find handset locator key at base; Desk or wall mountable - saves space and charges in two positions - horizontally on a desk or in the hanging position.
|Product Type||Cordless phone w/ call waiting caller ID|
|Additional Handsets Qty||1|
|Transmission Band||5.8 GHz|
|Ringer Control||3-step (off / low / high)|
|Indicators||Voice message waiting indicator|
|Dialed Calls Memory||1|
|Speed Dial Capacity||10|
|Type||LCD display - monochrome|
|Display Languages||English, French, Spanish|
|Hearing Aid Compatible||Yes|
|Placing / Mounting||Wall-mountable, table-top|
|Included Accessories||Belt clip|
|Type||Phone charging stand + power adapter - external|
|Technology||Rechargeable - nickel cadmium|
|Audible Battery Alert||Yes|
|Universal Product Identifiers|
BDV-T57 E808Y DC570 ZMC19MG KR-5000 SMC7904BRA Pixon Treo 680 SPH-B6600 RX-V440RDS Trophy RM125 NVE-N077PS HTC 2125 FLS473C 47635IP-MN 30169 CX6330 Chrono 300 NW-MS11 Transmitter PRO A210 PL-X77Z Meter III 84800 Laserjet 5500 S3600H Dvdr3355 37B Gps-300WE Vivicam 5024 12-32 SU-46NX1 Radio Pivot TTR125-2002 FH-P5000MP KH 2382 PSR-293 Paging Horn Kv-c1000 Classico W368R RH4810V FX-7400G Nview KH 451 Yamaha WX11 LH-RH9695IA Powershot S20 LAC8910 YFS200M 46 PB Colibri 21CC FV-300H 1 8 RSP-976 Pro PCI 42LH7000 BAR113-NIC-E Handy DUO VLS517S Trak2 NV-GS400GC Arxd 109 NV100HD Ericsson T715 Watch B872 RSX-1065 Scbtt750 30x S A3 EP UX-F250CW RS-09 MC-E3002 Modus LE-27T51B Review KAD42 SMC7004WFW HDR-FX7 Sa22017 Welltech 3804 PL50C450 CDE-9872RM CTA-1505R HR7735 XR-A380 VPC-S670 U5-132 DLG7188RM 30PF9946D HF-300 WT-2000ARM 1000 AHS DVD-P171 Deluxe HT496 DBX 386 G31M-S 42LH50 BT250V
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101