ATLAS OCAP 5-Device
Remote Control with Learning Control remoto de dispositivo ATLAS OCAP 5 con Aprendizaje
Users Guide Gua del usuario
PREPROGRAMMED FOR YOUR SET-TOP BOX
PREPROGRAMADO PARA SU SET-TOP BOX (aparato integrado de convertidor y descodificador)

TABLE OF CONTENTS

Introduction. 4 Features and Functions. 5 Key Charts. 6 Device Table. 8 Installing Batteries. 9 Programming Device Control. 10 Setting Up a Combo Unit. 11 Searching for Your Code. 12 Checking the Codes. 14 Using Learning. 14 Learning Precautions. 14 Programming a Learned Key. 15 Deleting a Single Learning Key. 16 Deleting All Learned Keys in a Specific Mode. 17 Programming Channel Control Lock. 17 Unlocking Channel Control. 17 Locking Channel Control to CBL. 18 Changing Volume Lock. 18 Unlocking Volume Control for a Single Device (Individual Volume Unlock). 18 Unlocking All Volume Control (Global Volume Unlock). 19 Locking Volume Control To One Mode (Global Volume Lock) 19 Programming Cable ID Lock. 20 Programming Macro Keys. 20 Programming a Macro Key. 21 Clearing a Macro Key. 21 Using the Master Power Key. 22 Programming the Master Power Key. 22 Using the Master Power Key. 23 Clearing the Master Power Key. 23 Re-Assigning Device Keys. 23 Clearing Custom Programming. 24 Activating Backlighting (Optional). 25 Troubleshooting. 25 FCC Notice. 26 Additional Information. 27 Manufacturers Codes (Cdigos de Fabricante). 57 Setup Codes for Audio Amplifiers. 57 Setup Codes for Audio Receivers. 57 Setup Codes for Audio Accessories. 60 Setup Codes for Cable Boxes/Converters. 60 Setup Codes for DVD Players. 62 Setup Codes for DVD Recorders. 67 Setup Codes for DVD Combos. 67 Satellite Receivers and DVR/PVR Systems. 68
www.urcsupport.com/atlasocap 2
Setup Codes for Satellite Receivers. 68 Setup Codes for TVs. 70 Setup Codes for TVs (DLP). 78 Setup Codes for TVs (HDTV). 78 Setup Codes for TVs (LCD). 81 Setup Codes for TV/DVD Combos. 81 Setup Codes for TV/VCR Combos. 82 Setup Codes for TV/VCR/DVD Combos. 84 Setup Codes for VCRs. 85

BACKLIGHTING TIPS

Some Atlas OCAP models include backlighting for keypad illumination. If you have backlighting, you will see a light bulb on the SETUP key, as shown below. To Enable Backlighting 1. Press the SETUP key twice. 2. Backlighting will now turn on after any keypress. To Disable Backlighting 1. Press the SETUP key twice. 2. Backlighting is now off.
www.urcsupport.com/atlasocap 3

INTRODUCTION

The Atlas OCAP 5-Device Remote Control with Learning by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-touse product. Moreover, its packed with advanced features such as: Preprogrammed control to operate the cable converter supplied by your cable service provider Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke Programmable Macro Keys to allow you to activate certain keys in a specific order Channel Lock to lock channel selection only to the cable converter Volume Lock to lock volume controls to one mode or individual modes Device Key Re-Assignment to remotely control a second (duplicate) device Code Search to help program control of older or discontinued components Color-coded keys to quickly locate popular functions Code library for popular video and audio devices Backlighting (not available on all remotes) Before using the product, you will need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control and cable service.

www.urcsupport.com/atlasocap 4

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the Atlas OCAP 5-Device Remote Control with Learning and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see Device Table on page 8.
www.urcsupport.com/atlasocap 5

Key Charts Key

Function Use SETUP for all programming sequences. Also use to turn backlighting on and off, if applicable. Press PWR once to turn on or off a home entertainment device. For MASTER POWER control, see Using the Master Power Key on page 22. Press VCR, DVD, AUD, TV, or CBL once to select a home entertainment device to control. Also see Device Table on page 8. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. Use GUIDE to display the program guide. Press SETTINGS once to display available interactive services. Use INFO to display the current channel and program information. Use DAY+ (or DAY-) to move a day forward (or back) on your cable converters program guide. Use the Cursor keys to move the cursor in the program guide and menu screens and to navigate within the interactive service. Use OK/SELECT to choose options, PPV events, and to tune to programs from the program guide. Use PAGE+ (or PAGE-) to page up (or page down) through menu screens and the program guide. Use EXIT to exit out of your cable converters menu and guide. Use A, B, C, or D to access additional cable features (see your cable converters manual). Use VOL+ (or VOL-) to raise (or lower) the audio volume.
www.urcsupport.com/atlasocap 6
Function Use FAV to cycle through your favorite channels stored in your cable converter. Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. Press MUTE once to turn the sound off or on. Press LAST once to recall the last channel. Press ON DEMAND to access Video on Demand services. Reserved for use as Macro keys (see Programming Macro Keys on page 20). Use to command your PVR/DVR cable box to instantly replay the last 7 seconds of a program you are watching. Press LIST once to display a list of recorded shows on your PVR/DVR cable box. Press LIVE to command your PVR/DVR cable box to return to watching live TV. In all modes except CBL, use REW, PLAY, FFWD, STOP, and PAUSE to control a VCR, DVD player, or a PVR (after selecting a desired device). To record in the VCR mode, press REC twice. In the CBL mode, use these keys to control the DVR/PVR functions of the set-top box. Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). For amplifiers/receivers, use the keypad numbers to select inputs 1 through 10. Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes).

www.urcsupport.com/atlasocap 7
Function Press SHIFT to access additional cable features (see your cable converters manual). Use PIP ON-OFF to switch the PictureIn-Picture feature on or off (if available on your TV or cable service). Use PIP SWAP to switch images and sound between the main and window pictures (if available on your TV or cable service). Use PIP MOVE to move the window picture to different positions in the main picture (if available on your TV or cable service). Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel (if available on your TV or cable service). In the CBL mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable. In all TV mode, use VIDEO SOURCE to watch TV or video/DVD programs on a desired device. For amplifiers/receivers, use VIDEO SOURCE to select an input source.
Device Table NOTE: Please refer to the table below when performing the instructions in Programming Device Control on page 10 or Setting Up a Combo Unit on page 11. After programming, the Atlas OCAP 5-Device Remote Control with Learning will be able to control the following types of devices: Device Key Controls these types of devices VCR, TV/VCR Combo, PVR (Personal Video Recorder), or extra DVD Player DVD Player, or extra VCR, TV/VCR Combo or PVR Audio Amplifier, Tuner, or Receiver Television
www.urcsupport.com/atlasocap 8

Device Key

Controls these types of devices Cable Box (Converter) or Satellite Receiver

INSTALLING BATTERIES

1. 2. 3. 4. On the back of the remote control, push the tab and lift off the battery cover. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. Align the covers keys with the cases holes and press the cover back into place. The tab should click when the cover is locked. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. When batteries need replacement, the remote control will cease to operate. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.
www.urcsupport.com/atlasocap 9
PROGRAMMING DEVICE CONTROL
The Atlas OCAP 5-Device Remote Control with Learning is preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section. NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and perform the instructions on Setting Up a Combo Unit on page 11. Also refer to Device Table on page 8 to find out which devices can be programmed onto each device key. If you have another brand of cable converter or a satellite receiver you would like to control, youll need to unlock the cable ID Lock before changing the converter code (see Programming Cable ID Lock on page 20). 1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. 2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice. 3. Use the Manufacturers Codes (Cdigos de Fabricante) starting on page 57) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see Searching for Your Code on page 12). If the device does not have a PWR key, press the (Play) key. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page. www.urcsupport.com/atlasocap 10

NOTE: 5.

VCR Code
Device Type:___________________ DVD Code
Device Type:___________________ AUD Code
Device Type:___________________ CBL Code
Device Type:___________________ TV Code
Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/VCR Combo or a TV/DVD Combo, you need to follow special steps to set it up. Perform the following instructions to control combo device: 1. For a TV/VCR Combo, turn on your TV/VCR Combo and insert a video cassette. (For a TV/ DVD Combo, insert a DVD). 2. On the remote control, press VCR once; it will blink once. Then press and hold SETUP until the VCR key blinks twice.
Use the Manufacturers Codes (Cdigos de Fabricante) starting on page 57 to locate the brand name and enter the first four-digit code for your combo device (for example, TV/ VCR). If you perform this procedure correctly, the VCR key will blink twice. www.urcsupport.com/atlasocap 11
If the VCR key did not blink twice after entering the codes last digit, repeat steps 2 through 3 and try entering the same code again. If youve located a setup code that works for your combo device (for example, a TV/VCR Combo) and a separate TV code is also listed, youll need to program this code into the remote control to access volume control (see Programming Device Control starting on page 10). Aim the remote control at your combo device (for example, TV/VCR Combo) and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (Searching for Your Code starting on page 12). For future reference, write down each working device code in the boxes below: TV/VCR or TV/DVD Code

TV Code (if used)

SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the Atlas OCAP 5-Device Remote Control with Learning after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice. 3. Enter 1. The TV key will blink twice.

www.urcsupport.com/atlasocap 12
Aim the remote control at the TV and press PWR once. Press and release the CH+ key continuously, then stop when the TV turns off. In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Press PWR. The TV should turn on, then press SETUP to lock in the code. If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SETUP when the TV turns on. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g., VCR, DVD, AUD, or CBL) for the device you are searching for.

6. NOTE:

www.urcsupport.com/atlasocap 13

CHECKING THE CODES

If you have set up the Atlas OCAP 5-Device Remote Control with Learning by searching for your device code (on the previous page), you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice. 2. Enter 0. The TV key will blink twice.

NOTE: 4.

To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 11. If a code digit is 0, the selected mode key will not blink. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes on page 11. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., VCR, DVD, AUD, or CBL) for the device you are checking. Write down the codes in the appropriate boxes on page 11.

USING LEARNING

The Atlas OCAP 5-Device Remote Control with Learning includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some considerations. Learning Precautions Your original remote controls must be in working order for learning to work properly. Learned keys are mode-specific, so each one can store a unique function for each mode. Do not use the following keys for learning: Device Keys, SETUP, Record (), Tune-In Keys. www.urcsupport.com/atlasocap 14

Learning capacity is approximately 16 to 25 keys, depending on the code being learned. Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning. Programming a Learned Key NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 5.
If the LED displays one long flash instead, either your batteries are low, or the Atlas OCAP 5-Device Remote Control with Learning has a memory fault. Press a mode key once (i.e., VCR, DVD, AUD, TV, or CBL) to assign a mode for learning. Then press the key on your Atlas OCAP Remote Control that learns the new code. Place the Atlas OCAP 5-Device Remote Control with Learning head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the Atlas OCAP 5Device Remote Control with Learning to learn.

2"

On the original remote, press and hold the key to be learned. The Atlas OCAP 5-Device Remote Control with Learnings LED will blink rapidly, then turn off. Continue holding
www.urcsupport.com/atlasocap 15
the key on the original remote until the Atlas OCAP 5-Device Remote Control with Learnings LED blinks twice. If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the Learning Precautions on the previous page. If needed, also see Troubleshooting on page 25. After review, start programming again at step 1. Repeat steps 2 through 5 for another mode and/or key or press and hold SETUP to exit programming.
Deleting a Single Learning Key This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see Programming a Learned Key on page 15) NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 6.
Press a mode key once (i.e., VCR, DVD, AUD, TV, or CBL). Press the key containing the learned function to be deleted twice. The remote will blink twice. Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming.
www.urcsupport.com/atlasocap 16
Deleting All Learned Keys in a Specific Mode NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 6.

Press a mode key twice (i.e., VCR, DVD, AUD, TV, or CBL) to clear all the learned keys for that mode. The LED blinks twice. Repeat step 2 for another mode or press and hold SETUP to exit programming.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote controls channel-control capabilities are locked to the cable converter. The affected keys* are 1 through 0, CH+, CH-, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can deactivate this feature to allow full access to these keys in the TV and VCR modes. *NOTE: This feature does not affect the AUD mode. Unlocking Channel Control 1. On the remote control, press CBL once; it will blink once. Press and hold SETUP until the CBL key blinks twice. 2. Enter 3. The CBL key will blink twice.
Press CH- once. The CBL key will blink four times.
Now the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.
www.urcsupport.com/atlasocap 17
Locking Channel Control to CBL 1. On the remote control, press CBL once; it will blink once. Press and hold SETUP until the CBL key blinks twice. 2. Enter 3.The CBL key will blink twice.
Press CH+ once. The CBL key will blink twice.
Now, regardless of what mode you select (except AUD), the channel keys will only change channels on your cable converter.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the Atlas OCAP 5-Device Remote Control with Learning, Global Volume Lock is set to TV, so you can control TV volume while in the VCR, DVD, TV or CBL mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. NOTE: The audio modes (AUD) volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will have control of the audio devices volume in all other modes (i.e., VCR, DVD, TV, and CBL). This can be an advantage if, for example, you always listen to home entertainment devices through your receivers speakers. Unlocking Volume Control for a Single Device (Individual Volume Unlock) 1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., CBL) and press it once. Next, press and hold SETUP until the device key blinks twice. 2. Enter 3. The last-selected device key will blink twice.

PROGRAMMING MACRO KEYS

The Atlas OCAP 5-Device Remote Control with Learning includes two macro keys (located directly below the MUTE and LAST keys). Macro keys allow you to set up key macros to activate certain keys in a specific order. For example, you can set up a key macro to change the channels on your TV, raise or lower the volume, and start recording on your VCR, all with the touch of one key. If you want to change the macros stored in a previously-programmed macro key, youll need to clear the key first (see Clearing a Macro Key on page 21).
www.urcsupport.com/atlasocap 20
Programming a Macro Key 1. On the remote control, press and hold SETUP until it blinks twice.
Enter 5. The SETUP key blinks twice.
Select a macro key (for example, F1) and press it once. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV followed by VOL+. You can program up to 15 key presses into one macro. Press and hold SETUP until it blinks twice.
To add another macro, repeat steps 1 through 5, substituting the new key sequence to be added in step 4. Programming more than five macros on the same macro key overwrites previous settings.
Clearing a Macro Key 1. On the remote control, press and hold SETUP until it blinks twice.
Press the macro key you want to clear once. Press and hold SETUP until it blinks twice.
This macro key is now clear and ready for reprogramming (see Programming a Macro Key on page 21). If desired, repeat these to clear another TuneIn key.
www.urcsupport.com/atlasocap 21
USING THE MASTER POWER KEY
The Atlas OCAP 5-Device Remote Control with Learning has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: MASTER POWER (PWR) only works in the CBL mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing MASTER POWER (PWR) once will turn the selected device on or off. Programming the Master Power Key 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 5. The last-selected device key blinks twice.
Press PWR once. For the first device you want in the power on sequence, press a device key (e.g., CBL) once. Then press PWR once. For the second device in the power sequence, press its key once (e.g, TV). Then press PWR.

5. 6. a. b.

Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired. To save the settings and exit the program: Press CBL once. Press and hold SETUP until the CBL key blinks twice.
www.urcsupport.com/atlasocap 22

Using the Master Power Key 1. After programming, point the remote control at the devices. Press CBL once. 2. Press PWR once to sequentially turn the programmed home entertainment devices on or off.
You will see the devices turn on or off according to the programmed sequence. Clearing the Master Power Key 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 5. The last-selected device key blinks twice.
Press and release PWR. Press and hold SETUP until the CBL key blinks twice.

RE-ASSIGNING DEVICE KEYS

The Atlas OCAP 5-Device Remote Control with Learning can be set up to control a second device of an alreadyassigned type. For example, to have the unit control a TV, a Cable Converter, and two audio devices (for example, two audio receivers), re-assign the unused VCR key to operate the second audio device as follows: NOTE: VCR is preset at the factory to control an RCA VCR. Performing the steps below will overwrite those settings. 1. On the remote control, press VCR once; it will blink once. Then press and hold SETUP until the VCR key blinks twice. 2. Enter 2. The VCR key will blink twice.
www.urcsupport.com/atlasocap 23
Press AUD once, then press VCR once. The VCR key will blink twice.
The VCR key is now ready to be programmed for your second audio device. See Programming Device Control on page 10. To re-assign other device keys, repeat these and substitute the key sequence using the following chart: NOTE: Only one device can be assigned to an unused device key at a time. To Re-Assign VCR as 2nd AUD key VCR as 2nd TV key VCR as 2nd CBL key VCR back to VCR Perform Key Sequence VCR SETUP 2 AUD VCR VCR SETUP 2 TV VCR VCR SETUP 2 CBL VCR VCR SETUP 2 VCR VCR
To re-assign another unused device key, substitute it for the VCR key above and then perform the sequence. For example, to re-assign an unused AUD key as a second DVD key, perform AUD SETUP 2 DVD AUD. When a re-assignment is done, the selected device key (e.g., AUD) will blink twice to confirm your choice. At that time, you will need to program device control (see Programming Device Control on page 10).
CLEARING CUSTOM PROGRAMMING
The Atlas OCAP 5-Device Remote Control with Learning contains a Custom Programming Reset program. You can use it to remove all custom programming, except your setup codes and reassigned device keys. IMPORTANT: Executing this program will erase all custom settings for Volume Lock, Learned Keys, Tune-In Keys, and Channel Lock. However, your device programming remains. 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.

www.urcsupport.com/atlasocap 24
Enter 0. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared.
ACTIVATING BACKLIGHTING (OPTIONAL)
On some models of your Atlas OCAP 5-Device Remote Control with Learning, you can activate backlighting. Backlighting enables your remotes keypad to remain lit for five seconds after you press any key. To enable backlighting on a remote with that feature, perform the following step: 1. Press SETUP twice within one second. Backlighting is turned on. To disable backlighting, perform the following step: 1. Press SETUP twice within one second. Backlighting is turned off.

TROUBLESHOOTING

PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA batteries (see Installing Batteries on page 9). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control. PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly. SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an infrared remote control. PROBLEM: TV/VCR Combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 11). PROBLEM: No volume on a second TV. SOLUTION: Follow instructions under Changing Volume Lock on page 18.
www.urcsupport.com/atlasocap 25
PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter. SOLUTION: Re-program the CBL key for cable code 0476 (see Programming Device Control on page 10). PROBLEM: Tried Search Method and still could not find a working code. SOLUTION: Try the Search Method again after clearing out the device key as follows: a. Press and hold SETUP until device key blinks twice. b. Enter 2. c. Press and release the device key to be cleared twice. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to www.urcsupport.com/atlasocap 26

www.urcsupport.com/atlasocap 75

Samsung

Samsux Sansui Sanyo Sceptre Scimitsu Scotch Scott Sears
Sharp Sheng Chia Sherwood Shogun Signature Signet SIM2 Multimedia Simpson Sony Soundesign Sova Soyo Spectricon Squareview SSS Starlite Studio Experience Superscan Supre-Macy Supreme SVA
0060, 0812, 0702, 0178, 0030, 1903, 1575, 1395, 1312, 1060, 0814, 0766, 0427, 0408, 0329, 0056, 0032, 0463, 1409, 1935 0154, 0088, 0107, 0146, 0159, 0232, 0484, 0799, 0893, 1142 0878, 1217, 1360, 0178 0236, 0180, 0178, 0019, 0179, 0309 0047, 0054, 0154, 0156, 0178, 0171, 0015, 0056, 0146, 0148, 0149, 0159, 0168, 0179, 0281, 0747 0093, 0039, 0153, 0157, 0165, 0220, 0281, 0386, 0398, 0491, 0688, 0689, 0818, 0851, 1297 0186, 0187 1100, 0000, 0011, 0080, 0111, 0273, 0353, 0810, 0834, 1317 0180, 0178, 0179, 0186 1320, 0003, 0180, 0843 0093, 0000 0748, 0587, 0768, 0865, 0870, 0871, 0872
www.urcsupport.com/atlasocap 76
Sylvania Symphonic Syntax Tandy Tatung Technics Technol Ace Technovox Techview Techwood Teknika Telefunken Tera Thomson TMK TNCi Toshiba
Tosonic Totevision Trical TVS Ultra Universal Universum US Logic Vector Research Victor Video Concepts Vidikron Vidtech Viewsonic Viking Viore
0054, 0030, 0171, 0020, 0028, 0065, 0096, 0381, 1271, 1944, 1963 0180, 0171, 1944 1144, 1240, 0003, 0049, 0055, 0396, 1101, 1285, 1286, 1287, 1288, 1361, 1756 0250, 0051, 0003, 0056 0054, 0180, 0150, 0060, 0092, 0016, 0019, 0039, 0056, 0175, 0179, 0186, 0312, 0322 0702, 0056, 0209, 0210 0178, 0056, 0154, 1256, 0156, 1265, 0060, 1945, 1935, 1704, 1656, 1635, 1356, 1343, 1325, 1306, 1156, 0845, 0832, 0650, 0149, 0463 0391, 1337 1286, 0054, 0242, 1398 0178, 0019, 0036 0797, 0857, 0864, 0885, 1330, 1342, 1578, 1627, 1755 0046, 0312 1207
www.urcsupport.com/atlasocap 77

Visart Vizio Wards

Waycon Westinghouse White Westinghouse Wyse Yamaha Zenith Zonda
1336 0864, 0885, 1499, 1756, 1758 0054, 0178, 0030, 1156, 0866, 0202, 0179, 0174, 0165, 0111, 0096, 0080, 0056, 0029, 0028, 0027, 0021, 0020, 0019, 0885, 0889, 0890, 1282, 1577 0463, 0030, 0019, 0769, 0797, 0833, 0839 0017, 0463, 1265, 0178, 0092, 0016 0003
Setup Codes for TVs (DLP) Cdigos de configuracin para Televisor (DLP) Hewlett Packard HP LG Magnavox Mitsubishi Optoma Panasonic RCA Samsung SVA Toshiba Vizio 0812, 1060, 1265, 1306 1499
Setup Codes for TVs (HDTV) Cdigos de configuracin para Televisor (HDTV) Advent Hitachi Marantz Mitsubishi Panasonic Pioneer Princeton RCA 0250, 0650, www.urcsupport.com/atlasocap 78

Samsung Sharp Toshiba

0812, 0702 0688, 0689 1256
Setup Codes for TVs (LCD) Cdigos de configuracin para Televisor (LCD) Accurian Action Akai AOC Apex Digital Astar Audiovox BenQ Byd:sign Cadia CyberHome Dell Emprex Envision FlexVision Funai Go Video Hannspree Hewlett Packard HP Hyundai iLo Initial Insignia Jensen Kost LG Magnavox Marantz Maxent Mintek Mitsubishi NetTV 0890, 0180, 0710, 0802, 0846, 0875, 1284, 1937, 1951, 1309, 0794 1080, 1178, 1264 1422, 1546 0813, 1348, 1088 0849, 1219, 1294 1286, 1603, 1990 1603, 1990 1204, 1517, 1262 0856, 1178, 1993 1454, 0802, 0762, 1211 1603, 0762

www.urcsupport.com/atlasocap 87
Optimus Optonica Orion Panasonic
Penney Pentax Philco Philips Pilot Pioneer Polk Audio Portland Presidian Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RadioShack Radix Randex RCA
Realistic ReplayTV Ricavision Ricoh
1062, 0162, 0037, 0048, 0104, 0058, 0432, 0454, 0593, 1048, 1162, 0184, 0209, 0002, 0295, 0479, 1479 1062, 0035, 0162, 0077, 0102, 0225, 0226, 0227, 0378, 0454, 0616, 1035, 1162, 1262 0035, 0037, 0240, 0042, 0038, 0040, 0054, 1035, 1237 0042, 0065, 0035, 0081, 0062, 0110, 0618, 0739, 1081, 0067, 0240 0060, 0202, 0760, 0761, 0039, 0046 0035, 0162, 0077, 0454, 1035, 1162 0000, 0037 0060, 0240, 0042, 0149, 0058, 0065, 0077, 0105, 0106, 0202, 0760, 0761, 0807, 0880, 1035, 1060 0035, 0037, 0048, 0047, 0000, 0104, 0046, 0062, 0066 0614, 0034
www.urcsupport.com/atlasocap 88
Runco Salora Samsung Samtron Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Singer Sonic Blue Sony Stack 9 STS Sylvania Symphonic Systemax Tagar Systems Tatung Teac Technics Teknika Thomas Tivo TMK Toshiba Totevision Touch Unitech
0240, 0045, 0051, 0053, 0739, 0048, 0039 0000, 0067, 0209, 0041, 0082, 0271, 0479, 1479 0047, 0240, 0104, 0046, 0159 0184, 0045, 0121, 0043, 0210, 0211, 0212 0035, 0037, 0047, 0000, 0042, 0104, 0046, 0054, 0066, 0105, 1237 0048, 0062, 0807, 0240, 0614, 0616 0035, 0032, 0033, 0000, 0011, 0034, 0636, 1032, 1232, 0042 0035, 0081, 0000, 0043, 0110, 0593, 1593, 1781 0000, 0593, 0000, 0041 0035, 0162 0035, 0037, 0000, 0618, 0636, 0739, 1996 0240, 0036, 0208 0045, 0043, 0066, 0210, 0212, 0366, 0845, 1008, 1145, 1972, 1996 0037, 0240
www.urcsupport.com/atlasocap 89
Vector Vector Research Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards
White Westinghouse XR-1000 Yamaha Zenith ZT Group
0045 0038, 0040 0045, 0040, 0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042, 0072, 0149, 0062, 0212, 0760 0209, 0072, 0637 0035, 0000, 0039, 0033, 0000, 0209, 0034, 0479, 0637, 1139, 1479 1972
www.urcsupport.com/atlasocap 90

M1056L

Revision 3.0

Generic Pioneer Charter OCAP.fm Page 1 Friday, July 20, 2007 1:28 PM

C4000 and S4000

Universal Remote Controls

Users Guide

PREPROGRAMMED FOR YOUR SET-TOP BOX
Generic Pioneer Charter OCAP.fm Page 2 Friday, July 20, 2007 1:28 PM

TABLE OF CONTENTS

Introduction. 3 Features and Functions. 4
Key Charts: C4000 and S4000 Remote Controls. 6 Device Table. 9
Installing Batteries. 9 Programming Device Control. 10 Setting Up a Combo Unit. 11 Searching for Your Code. 12 Checking the Codes. 13 Programming Channel Control Lock. 15
Unlocking Channel Control. 15 Locking Channel Control to CBL. 15

Changing Volume Lock. 15

Unlocking Volume Control for a Single Device (Individual Volume Unlock). 16 Unlocking All Volume Control (Global Volume Unlock). 16 Locking Volume Control To One Mode (Global Volume Lock) 17
Programming Cable ID Lock. 17 Programming the On DEMAND MACRO Key. 18
Programming the ON DEMAND Macro Key. 18 Clearing the ON DEMAND Macro Key. 19
Using the System On/Off Key. 19
Using the SYSTEM ON/OFF Key. 19

Using Keymover. 20

Programming Keymover. 20 Restoring All Keymover Keys in a Single Mode. 21 Restoring a Single Keymover Key. 21
Clearing Custom Programming. 21 Troubleshooting. 22 FCC Notice. 22 Additional Information. 23 Manufacturers Codes. 24 Setup Codes for Audio Amplifiers. 24 Setup Codes for Audio Receivers. 24 Setup Codes for Audio Accessories. 25 Setup Codes for Cable Boxes/Converters. 25 Setup Codes for DVD Players. 26 Setup Codes for DVD Recorders. 29 Satellite Receivers and DVR/PVR Systems. 29 Satellite Receivers and DVR/PVR Systems. 29 Setup Codes for Satellite Receivers. 29 Setup Codes for DVR/PVR Systems. 31 Setup Codes for TVs. 31 Setup Codes for TVs (DLP). 36 Setup Codes for TVs (HDTV). 37 Setup Codes for TVs (LCD). 37 Setup Codes for TV/DVD Combos. 38 Setup Codes for TV/VCR Combos. 40 Setup Codes for TV/VCR/DVD Combos. 41 Setup Codes for VCRs. 41
M1060A www.urcsupport.com 2

7/20/07

Generic Pioneer Charter OCAP.fm Page 3 Friday, July 20, 2007 1:28 PM

INTRODUCTION

The C4000 and S4000 Remote Controls by Universal Electronics are our latest generation universal remote controls. Their sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, they are packed with advanced features such as: Preprogrammed control to operate the cable converter or sattelite receiver supplied by your service provider Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke Programmable Macro Key to allow you to activate certain keys in a specific order Channel Lock to lock channel selection only to the set-top box. Volume Lock to lock volume controls to one mode or individual modes Device Key Re-Assignment to remotely control a second (duplicate) device Code Search to help program control of older or discontinued components Color-coded keys to quickly locate popular functions Code library for popular video and audio devices Before using the product, you will need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control.

www.urcsupport.com 3

Generic Pioneer Charter OCAP.fm Page 4 Friday, July 20, 2007 1:28 PM

FEATURES AND FUNCTIONS

Use the illustrations below to locate features on the C4000 and S4000 Remote Controls and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see Device Table on page 9.

C4000 Remote Control

www.urcsupport.com 4
Generic Pioneer Charter OCAP.fm Page 5 Friday, July 20, 2007 1:28 PM

S4000 Remote Control

www.urcsupport.com 5
Generic Pioneer Charter OCAP.fm Page 6 Friday, July 20, 2007 1:28 PM
Key Charts: C4000 and S4000 Remote Controls Key Function Use SYSTEM ON/OFF to control the Master Power macro. For MASTER POWER control, see Using the System On/Off Key on page 19. Use SET UP for all programming sequences. Press PWR once to turn on or off a home entertainment device. For MASTER POWER control, see Using the System On/Off Key on page 19. Press AUX, DVD, TV, CBL, or STB once to select a home entertainment device to control. Also see Device Table on page 9. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. Use GUIDE to display the program guide. Press MENU once to display available interactive services. Use INFO to display the current channel and program information. Use DAY+ (or DAY-) to move a day forward (or back) on your program guide. Use the Cursor keys to move the cursor in the program guide and menu screens and to navigate within the interactive service. Use OK/SELECT to choose options, PPV events, and to tune to programs from the program guide. Use PAGE+ (or PAGE-) to page up (or page down) through menu screens and the program guide. Use EXIT to exit out of the menu and guide.

www.urcsupport.com 6

Generic Pioneer Charter OCAP.fm Page 7 Friday, July 20, 2007 1:28 PM
Function Use A, B, C, or D to access additional cable features (see your set-top boxs manual). Use VOL+ (or VOL-) to raise (or lower) the audio volume.
Use FAV to cycle through your favorite channels stored in your set-top box. Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. Press MUTE once to turn the sound off or on. Press LAST once to recall the last channel. Press ON DEMAND to access Video on Demand services. This is also a programmable macro key. (See Programming the On DEMAND MACRO Key on page 18.) Press MY DVR once to display a list of recorded shows on your PVR/DVR cable box. Press LIVE to command your PVR/DVR cable box to return to watching live TV. In all modes except CBL/STB, use REW, PLAY, FFWD, STOP, and PAUSE to control a VCR, DVD player, or a PVR (after selecting a desired device). To record in the VCR mode, press REC twice. In the CBL mode, use these keys to control the DVR/PVR functions of the set-top box. Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). For amplifiers/receivers, use the keypad numbers to select inputs 1 through 10.

www.urcsupport.com 7

Generic Pioneer Charter OCAP.fm Page 8 Friday, July 20, 2007 1:28 PM
Function Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes). Use PIP ON-OFF to switch the PictureIn-Picture feature on or off (if available on your TV or cable service). Use PIP SWAP to switch images and sound between the main and window pictures (if available on your TV or cable service). Use PIP MOVE to move the window picture to different positions in the main picture (if available on your TV or set-top box). Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel (if available on your TV or cable service). In the CBL/STB mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable. In all TV mode, use VIDEO SOURCE to watch TV or video/DVD programs on a desired device. For amplifiers/receivers, use VIDEO SOURCE to select an input source.
Key Chart: S4000 Remote Control Special Keys Key Function Press DTV to access Digital Television services. Press MUSIC to access music channels. Press MEDIA to access special media. Press PHONE to access telephone services. Press PROMO to access promotional programming. Press HELP to access the Help menu.

www.urcsupport.com 8

Generic Pioneer Charter OCAP.fm Page 9 Friday, July 20, 2007 1:28 PM
Device Table Please refer to the table below when NOTE: performing the instructions in Programming Device Control on page 10 or Setting Up a Combo Unit on page 11. After programming, the C4000 and S4000 Remote Controls will be able to control the following types of devices: Device Key Controls these types of devices Television, DVD, VCR, PVR, Audio Receiver, Audio Tuner, Audio Amplifier, Cable Box, Satellite Receiver, Video DVD Player, or VCR, PVR, Audio Receiver, Audio Tuner, Audio Amplifier , CBL, SAT, Video Television, DVD, VCR, PVR, Audio Receiver, Audio Tuner, Audio Amplifier, Cable Box, Satellite Receiver, Video Cable Box (Converter) or Satellite Receiver, or Video Accessories.

INSTALLING BATTERIES

1. On the back of the remote control, push the tab and lift off the battery cover.

NOTE: 5.

Device Type:___________________ DVD Code
Device Type:___________________ CBL Code
Device Type:___________________ TV Code
Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/DVD Combo or a TV/VCR Combo, you need to follow special steps to set it up. Perform the following instructions to control combo device:

www.urcsupport.com 11

Generic Pioneer Charter OCAP.fm Page 12 Friday, July 20, 2007 1:28 PM
For a TV/DVD Combo, turn on your TV/DVD Combo and insert a DVD. (For a TV/VCR Combo, insert a videocassette). On the remote control, press DVD once; it blinks once. Then press and hold SET UP until the DVD key blinks twice. Use the Manufacturers Codes starting on page 24 to locate the brand name and enter the first five-digit code for your combo device (for example, TV/VCR). If you perform this procedure correctly, the DVD key blinks twice. If the DVD key did not blink twice after entering the codes last digit, repeat steps 2 through 3 and try entering the same code again. If youve located a setup code that works for your combo device (for example, a TV/DVD Combo) and a separate TV code is also listed, youll need to program this code into the remote control to access volume control (see Programming Device Control starting on page 10). Aim the remote control at your combo device (for example, TV/DVD Combo) and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (Searching for Your Code starting on page 12). For future reference, write down each working device code in the boxes below: TV/VCR or TV/DVD Code

TV Code (if used)

SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the C4000 and S4000 Remote Controls after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

www.urcsupport.com 12

Generic Pioneer Charter OCAP.fm Page 13 Friday, July 20, 2007 1:28 PM
Use the following device code digits to control a specific device: 0 = Cable/STB 1 = TV 2 = DVD/VCR 3 = Audio For example, to search for a code for your TV: 1. Turn on your TV. 2. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice. 3. Enter 1. The TV key blinks twice.
Press 1 (the device code digit for your TV). The TV key blinks twice. Aim the remote control at the TV and press PWR once. Press and release the CH+ key continuously, then stop when the TV turns off.

6. NOTE:

In the search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first. Press PWR. The TV should turn on, then press SET UP to lock in the code. If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SET UP when the TV turns on. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are searching for.

CHECKING THE CODES

If you have set up the C4000 and S4000 Remote Controls by searching for your device code (on the previous page), you may need to find out which five-digit code is operating your equipment.

www.urcsupport.com 13

Generic Pioneer Charter OCAP.fm Page 14 Friday, July 20, 2007 1:28 PM
For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice. 2. Enter 0. The TV key blinks twice.

NOTE: 4.

To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 11. If a code digit is 0, the selected mode key does not blink. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit. Finish writing down the code in the TV Code boxes on page 11. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are checking. Write down the codes in the appropriate boxes on page 11.

www.urcsupport.com 14

Generic Pioneer Charter OCAP.fm Page 15 Friday, July 20, 2007 1:28 PM
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote controls channel-control capabilities are locked to the cable converter. The affected keys* are 1 through 0, CH+, CH-, and LAST. This guarantees that you do not inadvertently change a channel on your TV or VCR. However, you can deactivate this feature to allow full access to these keys in the TV and VCR modes. Unlocking Channel Control 1. On the remote control, press CBL (or STB) once; it blinks once. Press and hold SET UP until the CBL (or STB) key blinks twice. 2. Enter 3. The CBL (or STB) key blinks twice.
Press CH- once. The CBL (or STB) key blinks four times.
Now the remote control provides TV and VCR channelcontrol capabilities while in the TV or VCR mode. Locking Channel Control to CBL 1. On the remote control, press CBL (or STB) once; it blinks once. Press and hold SET UP until the CBL (or STB) key blinks twice. 2. Enter 3.The CBL (or STB) key blinks twice.
Press CH+ once. The CBL (or STB) key blinks twice.
Now, regardless of what mode you select, the channel keys only change channels on your cable converter.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the C4000 and S4000 Remote Controls, Global Volume Lock is set to TV, so you can control TV volume while in the AUX,

www.urcsupport.com 15

Generic Pioneer Charter OCAP.fm Page 16 Friday, July 20, 2007 1:28 PM
DVD, TV or CBL mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. Unlocking Volume Control for a Single Device (Individual Volume Unlock) 1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., CBL) and press it once. Next, press and hold SET UP until the device key blinks twice. 2. Enter 3. The last-selected device key blinks twice.
Press VOL- once. The last-selected device key blinks four times.
Repeat steps 1 through 3 for each device you want volume to be unlocked. Now, after you select a device that has volume unlocked (e.g., CBL), pressing VOL+, VOL-,or MUTE, controls only that devices volume. Unlocking All Volume Control (Global Volume Unlock) Performing these instructions sets indepenNOTE: dent volume control for all programmed devices. 1. On the remote control, press and hold SET UP until the last-selected device key blinks twice. 2. Enter 3. The last-selected device key blinks twice.
Press VOL+ once. The last-selected device key blinks four times.

www.urcsupport.com 16

Generic Pioneer Charter OCAP.fm Page 17 Friday, July 20, 2007 1:28 PM
Locking Volume Control To One Mode (Global Volume Lock) 1. On the remote control, press and hold SET UP until the last-selected device key blinks twice. 2. Enter 3. The last-selected device key blinks twice.
Select a mode (e.g., TV or AUX) which you want to use to control the volume. The selected device key blinks twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of the selected device (e.g., TV) is controlled regardless of mode.
PROGRAMMING CABLE ID LOCK
The C4000 and S4000 Remote Controls are locked at the factory to operate your providers set-top box. However, if you have another brand or model of cable converter or satellite service that you would like to control, then youll need to perform the following steps to unlock the ID Lock, enter a new manufacturers code, and lock the ID Lock again. 1. Turn on the set-top. 2. On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice. 3. Enter 2. The CBL (or STB) key blinks four times, indicating ID Lock is unlocked.

Perform the instructions under Programming Device Control on page 10 to program device control for the desired cable converter or satellite receiver. When you are done, perform steps 5 and 6 on this page to again lock the cable ID Lock. On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice.

www.urcsupport.com 17

Generic Pioneer Charter OCAP.fm Page 18 Friday, July 20, 2007 1:28 PM
Enter 2. The CBL (or STB) key blinks twice, indicating ID Lock is again locked.
PROGRAMMING THE ON DEMAND MACRO KEY
The C4000 and S4000 Remote Controls includes one macro key (the ON DEMAND key). The ON DEMAND key allows you to set up key macros to activate certain keys in a specific order. For example, you can set up a key macro to change the channels on your TV, raise or lower the volume, and start recording on your VCR, all with the touch of one key. If you want to change the macros previously stored in the ON DEMAND macro key, youll need to clear the key first (see Clearing the ON DEMAND Macro Key on page 19). Programming the ON DEMAND Macro Key 1. On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice. 2. Enter 5. The CBL (or STB) key blinks twice.
Press and release ON DEMAND once. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV followed by VOL+. You can program up to 15 key presses into one macro. Press and hold SET UP. The CBL (or STB) key blinks twice. To add another macro, repeat steps 1 through 5, substituting the new key sequence to be added in step 4. Programming more than five macros on the ON DEMAND macro key overwrites previous settings.

www.urcsupport.com 18

Generic Pioneer Charter OCAP.fm Page 19 Friday, July 20, 2007 1:28 PM
Clearing the ON DEMAND Macro Key 1. On the remote control, press CBL (or STB) once; it blinks once. Then press and hold SET UP until the CBL (or STB) key blinks twice. 2. Enter 5. The CBL (or STB) key blinks twice.

Press and release the mode key you want to clear twice. For example, to clear all Keymover keys for the TV mode, press and release TV twice.
Restoring a Single Keymover Key 1. On the remote control, press the mode key once. 1. Press and hold SET UP until the last-selected mode key blinks twice (for example, TV). 2. Enter 4. The mode key blinks twice.
Press and release the device key twice. For example, to clear the CH+ key in TV mode, press and release CH+ twice.
CLEARING CUSTOM PROGRAMMING
The C4000 and S4000 Remote Controls contains a Custom Programming Reset program. You can use it to remove all custom programming, except your setup codes and reassigned device keys. IMPORTANT: Executing this program erases all custom settings for Volume Lock, Learned Keys, Tune-In Keys, and Channel Lock. However, your device programming remains. 1. On the remote control, press and hold SET UP until the last-selected device key blinks twice. 2. Enter 0. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared.

www.urcsupport.com 21

Generic Pioneer Charter OCAP.fm Page 22 Friday, July 20, 2007 1:28 PM

TROUBLESHOOTING

PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA batteries (see Installing Batteries on page 9). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control. PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly. SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an infrared remote control. PROBLEM: TV/VCR Combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 11). PROBLEM: No volume on a second TV. SOLUTION: Follow instructions under Changing Volume Lock on page 15. PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter. SOLUTION: Re-program the CBL key for cable code 0476 (see Programming Device Control on page 10). PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television www.urcsupport.com 22

Generic Pioneer Charter OCAP.fm Page 23 Friday, July 20, 2007 1:28 PM
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the users authority to operate this equipment.

ADDITIONAL INFORMATION

This product does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your C4000 and S4000 Remote Controls. For help via the Internet, visit us at: www.urcsupport.com Copyright 2006 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written permission of Universal Electronics Inc.
US Patents 6,014,092 5,515,052 5,959,751 4,959,810 5,228,077 5,255,313

www.urcsupport.com 23

Generic Pioneer Charter OCAP.fm Page 24 Friday, July 20, 2007 1:28 PM

MANUFACTURERS CODES

Setup Codes for Audio Amplifiers GE 30078 JVC 30331 Soundesign 30078 Victor 30331 Wards 30078 Yamaha 30354 Setup Codes for Audio Receivers ADC 30531 Aiwa 30158, 30189, 30405 Bose 31229, 31933 Capetronic 30531 Carver 30189 Denon 31360, 31104 Harman/Kardon 30110, 30189 Integra 30135 JBL 30110 JVC 30074 Kenwood 31313, 31570, 30027, 31027 Linn 30189 Magnavox 30189, 30531 Marantz 30189 Onkyo 30135, 30842 Optimus 31023, 30531 Panasonic 31308, 31518 Philips 30189, 31266 Pioneer 31023, 30014, 30531, 31384 Polk Audio 30189 Proscan 31254 RCA 31023, 31254, 30531 Sansui 30189 Sony 31759, 30158, 31758 Stereophonics 31023 Sunfire 31313 Technics 31308, 31518 Victor 30074 Wards 30158, 30189, 30014 Yamaha 30176, 31176 www.urcsupport.com 24
Generic Pioneer Charter OCAP.fm Page 25 Friday, July 20, 2007 1:28 PM
Setup Codes for Audio Accessories Apple 31115, 31644 NaviPod 31644 Setup Codes for Cable Boxes/Converters ABC 00003, 00008 Americast 00899 Bell South 00899 Comcast 01982 Digeo 01187 Director 00476 General Instrument 00476, 00810, 00276, 00003 GoldStar 00144 Hamlin 00009, 00273 Jerrold 00476, 00810, 00276, 00003 Memorex 00000 Motorola 01376, 00476, 00810, 00276, 01187, 01254 Pace 01877, 00237, 00008 Panasonic 00000, 00107, 01982 Paragon 00000 Philips 01305, 00317 Pioneer 01877, 00877, 00144, 00533 Pulsar 00000 Quasar 00000 Regal 00279, 00273 Runco 00000 Samsung 00144 Scientific Atlanta 01877, 00877, 00477, 00008 Sony 01006 Starcom 00003 Supercable 00276 Torx 00003 Toshiba 00000 Zenith 00000, 00525, 00899

21064, 21226 20522, 21708 20490, 20539, 20545 20503, 20591, 20741, 20869
Setup Codes for DVD Recorders Accurian 21416 Apex Digital 21056 Aspire Digital 21168 Broksonic 21419 Coby 21086 CyberHome 21129 Funai 20675, 21334 Gateway 21073 Go Video 20741, 21304 iLo 21348 JVC 21164 LG 20741 LiteOn 21416, 21440 Magnavox 20000, 20646, 20675, 21506 Panasonic 20490 Philips 20646 Pioneer 20631 Polaroid 21086 RCA 20522 Samsung 20490, 21470 Sharp 20675 Sony 21033, 21070, 21431, 21536 Sylvania 20675 Zenith 20741
Satellite Receivers and DVR/PVR Systems Setup Codes for Satellite Receivers Chaparral 00216 Crossdigital 01109 DirecTV 01377, 00392, 00566, 00639, 01639, 01142, 00247, 00749, 01749, 00819, 01856, 01076, 01108, 01109, 01392, 01442, 01609, 01640 www.urcsupport.com 29
Generic Pioneer Charter OCAP.fm Page 30 Friday, July 20, 2007 1:28 PM

Dish Network System

01505, 01005, 00775, 01170, 01775 Dishpro 01505, 01005, 00775, 01775 Echostar 01505, 01005, 00775, 01170, 01775 Expressvu 00775, 01775 GE 00566 General Instrument 00869 GOI 00775, 01775 Hitachi 00819, 01250 HTS 00775, 01775 Hughes Network Systems 01142, 00749, 01749, 01442 JVC 00775, 01170, 01775 Magnavox 00722 Mitsubishi 00749 Motorola 00869 Next Level 00869 Panasonic 00247, 00701 Philips 01142, 00749, 01749, 01076, 00722, 01442 Proscan 00392, 00566 RadioShack 00869 RCA 00566, 00855, 00143, 01392 Samsung 01377, 01276, 01108, 01109, 01442, 01609 Sony 00639, 01639, 01640 Star Choice 00869 Tivo 01142, 01442 Toshiba 00749, 01749, 00790, 01285 UltimateTV 01392, 01640 Uniden 00722 Voom 00869 Zenith 01856

www.urcsupport.com 30

Generic Pioneer Charter OCAP.fm Page 31 Friday, July 20, 2007 1:28 PM
Setup Codes for DVR/PVR Systems DirecTV 01377, 00392, 00639, 01142, 01076, 01392, 01442, 01640 Dish Network System 01505, 00775 Dishpro 01505, 00775 Echostar 01505, 00775, 01170 Expressvu 00775 Hughes Network Systems 01142, 01442, 20739 JVC 01170 Motorola 00869 Philips 01142, 01442, 20739 Proscan 00392 RCA 01392 Samsung 01442, 20739 Sony 00639, 01640 Star Choice 00869 Setup Codes for TVs Admiral Advent Aiko Akai Albatron America Action Anam Anam National AOC Apex Digital Audiovox Aventura Bell & Howell BenQ Bradford Broksonic Candle Carnivale Carver
10093, 10463 10761, 10783, 10815, 10817, 10842, 10812, 10702, 10030, 10672, 11903 10700, 10030 10748, 10879, 10765, 10767, 10890 10451, 10180, 10092, 10623, 10802, 10180 10236, 10030 10054

www.urcsupport.com 31

Generic Pioneer Charter OCAP.fm Page 32 Friday, July 20, 2007 1:28 PM
Celebrity Celera Changhong Citizen Clarion Commercial Solutions Contec Craig Crosley Crown Curtis Mathes

Setup Codes for TV/VCR Combos

Controlled by the TV

America Action Audiovox Emerson

Controlled by the VCR

Broksonic Citizen Curtis Mathes Daewoo Emerson Funai GE GoldStar Harley Davidson Hitachi Lloyd's Magnasonic Magnavox Memorex Mitsubishi Optimus Orion Panasonic Penney Quasar RadioShack RCA Samsung Sansui Sears Sony Sylvania Symphonic Thomas Toshiba Zenith
20593, 21278, 20807, 21035, 20000 20593, 21278 20000, 20593, 21781 20162, 20162, 20162, 21035 21035, 21237 20162, 20807, 21035, 20000, 21479 20000, 21237 20000, 20000, 20845, 21145 20000, 21479

www.urcsupport.com 40

Generic Pioneer Charter OCAP.fm Page 41 Friday, July 20, 2007 1:28 PM
Setup Codes for TV/VCR/DVD Combos
Akai Broksonic Emerson ESA Funai Magnavox Panasonic RCA Sharp Superscan Sylvania Symphonic Toshiba

21362, 21045

Sharp Setup Codes for VCRs ABS Admiral Adventura Aiwa Alienware American High Audiovox Broksonic Calix Canon Carver Citizen Craig Curtis Mathes CyberPower Daewoo Dell Denon
20000 20037, 20184, 20121, 20037, 21278 20037, 20047 20060, 20035, 20162, 20045, 20042

www.urcsupport.com 41

Generic Pioneer Charter OCAP.fm Page 42 Friday, July 20, 2007 1:28 PM
DirecTV Durabrand Dynatech Electrohome Electrophonic Emerex Emerson
20037, 20184, 20000, 20121, 20043, 20593, 21278, 21479, 21593 Fisher 20047 Fuji 20035, 20033 Funai 20000, 20593, 21593 Garrard 20000 Gateway 21972 GE 20060, 20035, 20807, 21035, 21060 Go Video 20614 GoldStar 20037, 21237 Gradiente 20000 Harley Davidson 20000 Harman/Kardon 20081 Hewlett Packard 21972 HI-Q 20047 Hitachi 20000, 20042, 20089 Howard Computers 21972 HP 21972 Hughes Network Systems 20042, 20739 Humax 20739 Hush 21972 iBUYPOWER 21972 JVC 20067 KEC 20037 Kenwood 20067 Kodak 20035, 20037 Linksys 21972 Lloyd's 20000 LXI 20037 Magnasonic 20593, 21278 Magnavox 20035, 20039, 20081, 20000, 20149, 20593, 21593, 21781

www.urcsupport.com 42

Generic Pioneer Charter OCAP.fm Page 43 Friday, July 20, 2007 1:28 PM
Marantz Marta Matsushita Media Center PC MEI Memorex MGA Microsoft Mind Minolta Mitsubishi Motorola MTC Multitech NEC Nikko Niveus Media Northgate Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Presidian Proscan Pulsar Quasar RadioShack Radix Randex
20035, 20035, 20035 20035, 20162, 20037, 20048, 20039, 20047, 20000, 20042 20067, 20043, 20807 20035, 21062, 20162, 20037, 20048, 20593 20184, 21479 21062, 20035, 20162, 20225, 20614, 20616, 21035 20035, 20037, 20042, 21035, 20035 20035, 20081, 20618, 21593 20060, 20035, 20162, 20037 20037

www.urcsupport.com 43

Generic Pioneer Charter OCAP.fm Page 44 Friday, July 20, 2007 1:28 PM
RCA Realistic ReplayTV Ricavision Runco Samsung Sanky Sansui Sanyo Scott Sears Sharp Sonic Blue Sony Stack 9 STS Sylvania Symphonic Systemax Tagar Systems Teac Technics Teknika Thomas Tivo Toshiba Totevision Touch Vector Video Concepts Videomagic Viewsonic Villain Voodoo

20060, 20042, 20149, 20807, 20880, 21035, 21060 20035, 20037, 20048, 20047, 20000 20614, 20039 20045, 20739, 21014 20048, 20039 20000, 20067, 20184, 20045, 20121, 20043 20035, 20037, 20047, 20000, 20042, 21237 20048, 20807 20614, 20616 20035, 20032, 20033, 20000, 20636, 21232, 20042 20035, 20081, 20000, 20043, 20593, 21593, 21781 20000, 20593, 20035, 20162 20035, 20037, 20618, 20636, 20739, 21996 20045, 20043, 20845, 21008, 21145, 21972, 21972
Generic Pioneer Charter OCAP.fm Page 45 Friday, July 20, 2007 1:28 PM
Wards XR-1000 Zenith ZT Group
20060, 20035, 20048, 20047, 20081, 20000, 20042, 20149 20035, 20000 20039, 20033, 20000, 21479 21972

www.urcsupport.com 45

Generic Pioneer Charter OCAP.fm Page 46 Friday, July 20, 2007 1:28 PM

www.urcsupport.com 46

Generic Pioneer Charter OCAP.fm Page 47 Friday, July 20, 2007 1:28 PM

www.urcsupport.com 47

Generic Pioneer Charter OCAP.fm Page 48 Friday, July 20, 2007 1:28 PM

M1060A

Revision 1.0