Remote Control

Owners Manual

AVEX R6

Congratulations!
Congratulations on purchasing Universal Remote Controls AVEX R6 Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy-to--use remote. The AVEX R6 can be used with thousands of audio/video components because of the extensive library of codes that have already been programmed into the remote. So. get ready to sit back, relax, and simplify your home entertainment experience. This Owners Manual is designed to assist you in programming your AVEX R6 remote to work with your components by guiding you through an easy step-bystep process. Everything you need to know about programming the AVEX R6 is contained in this Manual. AVEX R6 Owners Manual 2009 Universal Remote Control, Inc. This document is protected by the copyright laws of the United States and internationally by the Berne Convention. No part of this manual may be reproduced in any form without the express written consent of Universal Remote Control, Inc. Although reasonable care has been taken to assure the accuracy of the information herein contained, Universal Remote Control, Inc. is not responsible for operational, technical or editorial errors or omissions. The specifications and information in this manual may be subject to change without notice. MacroPower and SimpleSound are trademarks of Universal Remote Control, Inc. Entertainment Made Simple is a registered trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective owners.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Table of Contents

Getting Started - Overview Control up to 6 Components..4 Component Buttons..4 Battery Installation..4 Low Battery Warning..5 Couch Mode..5 Keypad Layout & Button Functions.6 Programming AVEX R6 Using Pre-Programmed Codes..7 Quick Set-Up Method..7 Three-Digit Code Entry Method.8 Auto-Search Method..10 Programming AVEX R6 Using the Learning Method.12 Special Advanced Features.14 Programming Automated Activities.14 MacroPower Total System On/Off.14 Programming Multi-Commands to Macro Buttons...16 My Favorites Favorite Channels.17 More Favorite Channels..18 SimpleSound Total System Volume Control.19 Channel Control Punch Through.21 Transport Control Punch Through.22 OSD (On-Screen Display) Control Punch Through..23 Input Switching Macros..24 Erasing Commands-Overview.25 Erasing a Single Learned Command.25 Erasing All Learned Commands from One Component..26 Erasing MacroPower & Other Macro Commands..27 Erasing SimpleSound & Other Punch Through Commands.28 Factory Reset...29 Finding a Components Set-Up Code Number..30 Pre-Programmed Code Tables.31 CABLE/SAT..32 TV..33-34 DVR/VCR..35-36 DVD..37 AUDIO..38 AUX..39 FAQs..40 Warranty..41 Specifications..41
Getting Started - Overview
Control up to 6 Components The AVEX R6 remote control is designed to control up to six different Audio/Video components and operate virtually all brands of AUDIO, TV, DVD, VCR/DVR, SAT/CABLE and AUX (Light, Music Server, etc.) components. Component Buttons Once you have programmed the AVEX R6 for all of your components, all you need to do is press a component button and all the buttons on the AVEX R6 will work with that component. For example, when you press the TV component button, all the buttons on your AVEX R6 will operate your TV. If you press the DVD component button, all the buttons on the AVEX R6 will operate your DVD. Each time you press any of the buttons on the remote, the LED light in the component button will light up to indicate which component you are controlling.

TV BUTTON

Battery Installation Press the tab and remove the cover of the battery compartment located in the back of your remote. Insert the two AAA batteries (included in the package) making sure to match the positive (+) and negative (-) symbols as shown in the diagram. Place the cover back over the battery compartment.
INSERT BATTERIES CORRECTLY

Page 4

Low Battery Warning When the batteries are low and need to be replaced the component LED will quickly blink three times when you press the Power [ON] button. Couch Mode The AVEX R6 is designed to automatically turn itself off if a button is pressed for more than 30 seconds. This prevents battery power from being depleted should the remote accidentally slip between the couch cushions.

Page 5

Keypad Layout & Button Functions
Allows you to turn the selected component on and off.

SYSTEM OFF

Designed to send Power On/Off commands for up to six components with one button press.
TV, CBL,VCR, AUDIO, DVD, AUX
Used to select the component you want to operate and signals remote control activity.
Displays the Program Guide listings through the Cable Set Top Box.
Displays the Applications Menu through the Cable Set Top Box.

CURSOR NAVIGATION PAD

Used for programming steps and onscreen navigation and highlighting.
Displays information about the program currently playing or highlighted in the Program Guide through the Cable Set Top Box.
Exits from current screen through the Cable Set Top Box.

SELECT

Selects highlighted screen options.

VOLUME

Raises or lowers the sound volume.
Selects the video source from available components.

MY FAVORITES

Customprogrammable Favorite Channel Buttons
Returns to the previously tuned channel through the Cable Set Top Box.

TRANSPORT CONTROLS

Perform standard VCR and DVD functions when in VCR and DVD mode, or VOD (Video-On-Demand) and DVR (Digital Video Recorder) functions when in Cable mode.

Silences the Audio. Press to activate. Press again to restore sound to the previous level.

NUMBER PAD

Use to enter code numbers for programming components and to enter channel numbers to tune in channels. Also used to make numeric entries on on-screen menus.

PIP CONTROLS

Controls Picture-InPicture actions.

Page 6

Programming AVEX R6 using Pre-Programmed Codes
There are three different ways you can program your AVEX R6 using the component brand codes that are pre-programmed into the remote. One of these will work for you! Quick Set-Up Method Three-Digit Code Entry Method Auto-Search Method ***

TRY THIS FIRST!

Quick Set-Up Method STEP 1: Manually or using your old remote, turn on the component you want to programfor example, to program your TV, turn on your TV set. STEP 2: Point the AVEX R6 toward the component that you want to program (in this case the TV set) and press and hold the component button (in this case the TV button). While holding down the component button, begin to press numeric keys, one number at a time, starting from 1, continuing to 2, 3. 0 until component (in this case the TV) turns off. STEP 3: Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored. Repeat the above three steps for other components.

COMPONENT BUTTONS

Page 7
IF QUICK SET-UP DID NOT WORK, TRY THIS NEXT:
Three-Digit Code Set-Up Method STEP 1: Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand. STEP 2: Once you have located the 3-digit codes for each of the components that you wish to operate with your AVEX R6, write them ALL down on a piece of paper. Its important that you write down all the codes listed for your brand because only one code is going to work with your component. STEP 3: Manually or using your old remote, turn on the component you want to programfor example, to program your TV turn on your TV set. STEP 4: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component LED light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds,the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

Page 12

STEP 5: Once the AVEX R6 has learned all the buttons in the selected component mode, press and hold the Component button and ENTER [ENT] buttons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly. Repeat Steps 1-5 to program any other component modes. If the Learning Method does not work, here are a few suggestions: If you have a Plasma TV, move to another room. Avoid programming under fluorescent light or direct sunlight. Put new batteries in the old remote. Gradually vary the distance between the two remote controls. Tap the button on your old remote instead of pressing and holding it during the learning process. Here are some additional facts regarding the Learning process: Learned functions override any existing pre-programmed functions on the remote control. Learned functions are automatically erased when a new function is learned on the same button. Learned functions are retained even after a different set-up code number is programmed into the remote control. To return to an original pre-programmed function, a learned function must to be erased.
(9:00AM-6:00PM EST) Page 13
Special Advanced Features
Programming Automated Activities The AVEX R6 has six Macro buttons (POWER, SYSTEM OFF, A, B, C, D) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons, or Automated activity, will send out the series of commands that are stored in that particular button. MacroPower Total System On/Off MacroPower makes several devices work together by pressing one button. Imagine the convenience of turning on your TV, your DVD player and your Surround Sound receiver by pressing a single button on your AVEX R6. What could normally take three remotes and three button pushes, the AVEX R6 can accomplish with the press of one button. We call that MacroPower. Any of the Power On or the System Off buttons can be programmed for MacroPower control. To set it up, follow these easy steps: STEP 1: To program MacroPower commands for the Power ON button, press the POWER button and the MUTE button at the same time for 2 seconds until one of the component button LED lights turns on.

Page 14

IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER button.

POWER COMPONENT BUTTONS

STEP 3: Once youve entered all the Power On commands, press the CHANNEL UP button to save your MacroPower commands. The component LED lights will blink three times to confirm that the programming has been successfully saved. CHANNEL UP
SUGGESTION: Most of the components have the same signal to turn the power On and Off. You may want to program MacroPower only in the POWER button and save the System Off button to turn components On or Off individually. Note: If you want to program MacroPower for the SYSTEM OFF button, repeat the same steps used for Power ON programming.

Page 15

Notes regarding programming multicommands to Macro buttons: You can program up to 20 commands on each Macro button. You can program delays in between commands by pressing the PAUSE button. Each press adds a one-half second delay. Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function). You can also program macro commands in layers by pressing the STOP button in between commands. (For example, if you press CBL, 009, STOP, 035, STOP, 365, STOP and the CH+ button in Step 2) the remote will send out 009 at the first press of the A button, and then send out 035 at the second press, etc. You cannot program the CH+ or PAUSE buttons as macro commands.
(9:00AM-6:00PM EST) Page 16
Programming My Favorites - Favorite Channel Buttons In Cable mode, the A, B, C, D buttons are also designed to serve as dedicated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Heres how to program Favorite Channels: STEP 1: Press the CBL button to select the Cable mode. STEP 2: Press the A, B, C or D button and the MUTE button at the same time for 2 seconds until the CBL component LED turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

MUTE A BUTTON

STEP 3: Using the Number Pad, punch in the Channel number of the Favorite Channel that you want to store in the Macro button. The Cable component LED light will blink once for each button pressed. STEP 4: Press the CHANNEL UP button to store the commands entered. The CBL component LED will blink three times to confirm the programming.

CHANNEL UP

Page 17
More Favorite Channels You can also use the "A, B, C and D" buttons to program favorite channels. Each button can program up to 5 favorite channels (or a total of 20 button presses), but you're not limited to using these buttons for only that. You can record any series of button presses into a macro. This is great switching video or audio sources. Here is an example of how to program a macro on the "A" button with three favorite channels. We'll use "25, 50, and 75." STEP 1: Press the device you are getting channel control from. Ex. Cable. STEP 2: Press and hold the "A" button and "Mute" button at the same time until a device button lights up. STEP 3: Press "2". STEP 4: Press "5". STEP 5: Press "Select". STEP 6: Press "Stop". STEP 7: Press "5". STEP 8: Press "0". STEP 9: Press "Select". STEP 10: Press "Stop". STEP 11: Press "7". STEP 12: Press "5". STEP 13: Press "Select". STEP 14: Press "Stop". STEP 15: Press "Channel Up" to save macro. Note: Pressing the "Select" button just assures the quickest response from the Cable box. Pressing "Stop" allows you to program several favorite channels on one button. Now, the first press of the "A" button will change the channel to "25." The second, to "50" and the third, to "75." Then the sequence starts all over again.

Page 18

SimpleSound Total System Volume Control SimpleSound is one of the most exciting features of the AVEX R6. It gives you total volume control over ALL the components in your system, even those that do not have built--in volume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and inconvenience of constantly switching between component modes just to control volume. First you should identify which device in your system will be used to deliver sound. In a basic system, the sound may come from your TV speaker. In a more advanced system, the sound may come from your audio components (such as a Surround Sound Receiver or Home Theatre system). Now, lets set--up SimpleSound. Heres how: STEP 1: Press and hold the button that corresponds to the Component you want to add volume control to (such as a DVD or VCR) and the SELECT (SEL) button at the same time for about three seconds until the component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

Page 19

STEP 2: Press the VOLUME UP button and then press either the TV or AUDIO component button that you want to use for volume. The Component LED light will blink three times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component. VOLUME UP
Repeat Steps 1-2 for all other components. Note: SimpleSound is whats technically referred to as a Punch Through feature and is not limited to volume control. It can also be applied to other groups of buttons. If you find yourself switching to a particular component mode frequently to access a particular control, consider using Punch Through.

Page 20

Channel Control Punch Through This Punch Through enables you to program the AVEX R6 so that either the Cable or TV Channel Controls (CHANNEL UP, DOWN, LAST, CHANNEL NUMBERS 0-9, +10 and ENTER) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add channel control to, such as DVD or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the CHANNEL UP button. The component LED light will blink once.
STEP 3: Press either the TV or CBL button that you want to use as the source of channel control. The component LED will blink three times to confirm it is saved.

Page 21

Transport Control Punch Through This Punch Through enables you to program the AVEX R6 so that VCR or DVD Transport Controls (PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add Transport Control to, such as CBL or TV, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. Press the PLAY button. The component LED light will blink once.

STEP 3: Press either the DVD or VCR button that you want to use as the source of Transport Control. The component LED will blink three times to confirm it is saved.

Page 22

OSD (On-Screen Display) Control Punch Through This Punch Through enables you to program the AVEX R6 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add OSD Control to, such as TV or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the MENU button. The component LED will blink once.
STEP 3: Press either the CBL or DVD button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved.

Page 23

Input Switching Macros These macros can be difficult and will vary depending on your specific setup. Because most TVs have a "Toggle" input feature, there's no way to jump to a specific video source discretely. "Toggle" means that you have one button on your remote that cycles through all available video sources (inputs) on your TV. With a Toggle input feature, you will need to set a starting point (default input). Since you are most likely watching Cable TV most of the time, you might want to set that input at the starting point. So you'll be programming your macros assuming that you are always on the Cable input. Now, what you'll have to do is figure out how many presses of the input button it will take to get to the desired video source, then how many presses it will take to get back to the staring point. This way, you can use the "B" button to switch to the "DVD" input, then back to the "Cable input" and maybe the "C" button to switch to the "VCR" input, then back to the "Cable" input. Below is an example of a macro on the "B" button that switches video sources on your TV to the "DVD" input. Let's say that it takes 2 presses of the input button to get to the "DVD" input (from the starting point) and 3 presses of the input button to get back to the "Cable" input. STEP 1: Press and hold the "B" button and "Mute" button at the same time until a device button lights up. STEP 2: Press "TV". STEP 3: Press "Input". STEP 4: Press "Pause". STEP 5: Press "Input". STEP 6: Press "Stop". STEP 7: Press "TV". STEP 8: Press "Input". STEP 9: Press "Pause". STEP 10:Press "Input". STEP 11:Press "Pause. STEP 12:Press "Input". STEP 13:Press "Stop". STEP 14:Press "Channel Up" to save macro. Pressing "Pause" in between input commands will add a small delay after each press of the input button. This will assure that all commands get sent properly. Much like in the previous example, pressing the "Stop" button allows you to start a new macro. So, the first press of the "B" button will change inputs to the "DVD" video source and the second press will change back to the starting point. It is important to always switch back to the default starting point. This way it sets up the next macro on another "Favorites" button to execute properly.

SELECT INFO

STEP 2: Press the INFO button and count the number of times the Component LED light blinks. This number indicates the first digit of the code. Next it will pause for about one second and begin blinking again to indicate the number of the second digit. Then once again it will pause, then blink, to indicate the number of the third digit. Example: One blink, pause, eight blinks, pause, three blinks indicates code number 183. Note that ten (10) blinks represent the number 0.

Page 30

Pre-Programmed Code Tables
The AVEX R6 Pre-Programmed code library is classified by category (TV, VCR, DVD, etc.). Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three-digit code. Circle the correct row and refer to it while you perform setup operations. CABLE/SAT Cable Set top boxes and satellite

receivers

32 33-34 35-38

TV DVR/VCR DVD AUDIO AUX

TVs, Plasmas, Projectors and Monitors VCRs, DVRs & Combo Units DVD Players and Recorders Amps, Preamps and A/V Receivers
iPod, Media PC, Gaming System, 39 Lighting Controls

Page 31

CABLE/SAT
Brand Code Numbers Brand Code Numbers
148 ABC ADELPHIA ADVANCED NEWHOUSE 001 ALTRIO 001 AMINO ARMSTONG 110 AT&T BROADBAND 110 AT&T IPTV 251 ATLANTIC BROADBAND BLUE RIDGE BRESNAN 110 BRIGHT HOUSE BUCKEYE COMM 110 CABLEVISION 108 CHARTER CISCO COGECO 110 COMCAST COMSAT 110 COX DIGITAL DIGEO 111 DIRECTOR 110 ENVIO 005 GCI 110 GENERAL INSTRUMENT INSIGHT 110 JERROLD MASSILLON 110 MEDIACOM 110 MIDCONTINENT 110 MOTOROLA MOXI NCTC 110 NEW WAVE 110 OAK 031 ONELINK 001 PACE PANASONIC 044 PHILIPS 085 PIONEER 105 RCN 110 RODGERS 001 SCIENTIFIC ATLANTA 251 SEREN 001 SERVICE ELECTRIC 110 SHAW 110 SIGECOM 001 SONY 108 STARCOM 004 SUSQUEHANNA TIME WARNER TORX 004 UNITED CABLE 004 VERIZON 110 VIDEOTRON 001 VISTA III MEDIA 110 WAVE BROADBAND 110 WEHCO VIDEO 110 WEGENER 250 WIDE OPEN WEST 001 SATELLITE Receivers CABLEVISION DIRECTV DISH ECHOSTAR EXPRESSVU GE GENERAL INSTRUMENT GOI HITACHI HTS HUGHES JVC LG MITSUBISHI NEXT LEVEL PANASONIC PHILIPS PROSCAN RADIOSHACK RCA SAMSUNG SONY STAR CHOICE TOSHIBA VOOM

Page 32

ABEX ADMIRAL ADVENT ADVENTURA AIKO ALERON AKAI

Code Numbers

Page 34

DVR/VCR

Brand Code Numbers Brand

MULTITECH NEC NIKKO NORDMENDE OPTIMUS OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PULSAR RADIO SHACK RADIX RANDEX RCA REALISTIC RICO SAMSUNG SANKY SANSUI SANYO SCOTT SEARS SHARP SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC VILLAIN WARDS XR-1000 YAMAHA ZENITH

034 058

VCRs ADMIRAL 053 ADVENTURA 034 AIKO 117 AIWA 034 AKAI 043 AMERICA ACTION 117 AMPRO 072 ANAM 145 AUDIO DYNAMICS AUDIOVOX 101 BROOKSONIC 129 CALIX 101 CANON 145 CCE 117 CITIZEN CRAIG CURTIS MATHES 145 DAEWOO 112 DBX DYNATECH ELECTROHOME 059 ELECTROPHONIC 101 EMERSON 153 FISHER 008 FUNAI 034 GARRARD 034 GE GO VIDEO 102 GOLDSTAR GRADIENTE 034 HARLEY DAVIDSON 034 HARMAN KARDON 012 HITACHI 013 HQ 034 INSTANTREPLAY 145 JCL 145 JCPENNEY JENSEN 043 JVC KEC 101 KENWOOD KODAK LG LLOYD 034 LXI MAGIN 102 MAGNAVOX 034 MARANTZ 145 MARTA 101 MATSUSHITA 145 MEI 145 MEMOREX MINOLTA 013 MITSUBISHI MOTOROLA MTC 034 102

Page 35

Brand Code Numbers
TV/VCR Combos AMERICA ACTION DAEWOO EMERSON FUNAI GOLDSTAR HARLEY DAVIDSON HITACHI JCPENNEY LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SAMSUNG SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH DVR Receivers HUGHES HUMAX PHILIPS REPLAY NETWORKS SONY TIVO TOSHIBA

001 001

Page 36
AKAI ALLEGRO APEX DIGITAL BLAUPUNKT BROKSONIC CINEVISION COBY CYBERHOME DENON DURABRAND DVD 2000 EMERSON ENTERPRISE FISHER FUNAI GOLDSTAR GO VIDEO
GREENHILL 111 HARMAN KARDON HITACHI 101 HITEKER 087 ILO 268 INITIAL 111 INSIGNIA 143 JBL 084 JVC 012 KENWOOD 151 KISS 279 KLH 135 KRELL 104 LITEON LEXICON 148 LG MAGNAVOX MARANTZ MALATA 267 MERIDIAN 153 MINTEK MITSUBISHI 017 MYRYAD NAD 088 NAKAMICHI 103 NESA 111 ONKYO OPTIMUS 023 OPPO ORION 130 PANASONIC PHILIPS 344 PHILIPS MAGNAVOX PIONEER POLAROID 233 POLK AUDIO RIO 091 RJTECH 269 SAMSUNG 275 SANSUI 154 SANYO 147
SEARS 130 SENSORY SCIENCE 222 SHARP 094 SHINSONIC 033 SONIC BLUE 091 SONY SYLVANIA 143 SYMPHONIC 143 TATUNG 102 TEAC TECHNICS 138 TECHWOOD 088 THETA DIGITAL 023 TOSHIBA URBAN CONCEPTS 035 VENTURER 149 YAMAHA ZENITH DVD Recorders GO VIDEO CYBERHOME ILO KISS LITEON PANASONIC SENSORY SCIENCE SONY TOSHIBA TV/DVD Combos AKAI FUNAI INSIGNIA MAGNAVOX MINTEK SAMSUNG SYLVANIA SYMPHONIC TOSHIBA TV/DVD/VCR Combos MAGNAVOX PANASONIC SYLVANIA TOSHIBA

143 164

DVD/VCR Combos GO VIDEO 137 PANASONIC 150 PHILIPS 001 (VCR Functions for VCR 067) SAMSUNG SANSUI 154 SONY 145 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR101)

Page 37

REALISTIC ROTEL SAMSUNG SANSUI
AIWA AKAI 189 ARCAM B&K BOSE BOSTON ACOUSTICS 447 CARVER DENON ELAN 290 ESCIENT 451 FISHER HARMAN KARDON 318 HITACHI 020 INSIGNIA 589 INTEGRA JAMO 398 JVC 291 KENWOOD KLH 331 KOSS 573 LEXICON LINN MAGNAVOX MARANTZ MCINTOSH MITSUBISHI MYRYAD 077 NAD NAKAMICHI NEC 176 NIRO 343 NILES 403 ONKYO OPTIMUS 041 PANASONIC 292 PARASOUND PHILIPS PIONEER RCA 067 288
SANYO 214 SCOTT 019 SHARP SHERWOOD SONY 271 SOUNDESIGN 036 SUNFIRE 066 TEAC TECHNICS 262 TOSHIBA YAMAHA 274 ZENITH SATELLITE Radios DELPHI POLKAUDIO SIRIUS XM SATELLITE RADIO

555 515

Page 38
iPod Controls APPLE / iPod BOSE GRIFFIN KENSINGTON TEN TECHNOLOGY MEDIA PC Controls DELL GATEWAY HP KEYSPAN SONY TOSHIBA WINBOOK
GAMING SYSTEM Controls MICROSOFT / XBOX SONY / PSLIGHTING Controls LITE-TOUCH LUTRON X-10 XANTECH

688 689

DIGITAL TO ANALOG CONVERTER Controls ARTEC 586 CASTI 587 CRAIG 588 GRIDLINK 592 INET ACCESS 589 INSIGNIA 567 LASONIC 592 MAGNAVOX 584 RCA 585 SANSONIC 592 TIVAX ZENITH 567 ZINWELL 591 593

Page 39

Frequently Asked Questions
If the batteries run out, will I lose my settings? No. The AVEX R6 stores all of your settings in nonvolatile FLASH memory. You could remove the batteries for months, replace them at your convenience, and the AVEX R6 would still remember your settings. What is MacroPower? MacroPower is a very useful way to make a lot of things happen with one button push. For example, in most home theaters, to watch television, the user must turn on the TV, then turn on the Cable Box or the Satellite Receiver, then turn on the Surround Sound system for sound. Instead of pressing all of those buttons one at a time, MacroPower enables you to turn on all of these components, in the sequence you want, with one button push. For more information on why and how you should program MacroPower commands, refer to page 17 in this Manual. What if my remote control no longer works from a distance? Replace the batteries with new Alkaline batteries. Who can I contact for more answers? The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have. E-Mail us at techsupport@universalremote.com Visit our website www.universalremote.com Call us at 1-800-901-0800 Monday - Friday, 9AM to 6PM (EST)

Page 40

Limited Warranty
UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. This warranty does not apply to the following: Units purchased from unauthorized resellers. Units purchased second-hand (used). Units installed or deployed for rental or commercial use. Damage caused by misuse, neglect, or acts of nature. Products that have been modified or incorporated into other products. Products purchased more than 12 months ago.

Specifications

Learning Capability IR frequencies (15kHz to 100kHz) Macro Capability 6 Macros of up to 20 steps each IR Range (Line of Sight via Infrared) 30--50 feet, depending on the environment Weight 6.9 oz. (with batteries) Size 2 1/8 x 1 1/8 x 8 3/4 Batteries Two AAA Alkaline batteries included

Page 41

Information To The User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Warning

Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

Page 42

Page 43

(9:00AM-6:00PM EST)

OCE-0086A Rev 03

Order # 80-7035 (1-9) $399.00 (10-up) $392.00

ProA/V Media Extender

Wirelessly transmit audio and video in your home or office without NEW! any unnecessary cables Compatible with TV's that have an RCA/composite or S-video input Converts and sends clear, stable A/V signals up to 100' line of sight 2.4GHz wireless transmitter and receiver with four selectable channels Compact size and stylish design Includes: ProA/V wireless video sender and receiver, two 5' RCA cables, two AC power adapters and instruction manual
Order # 80-7045 (1-9) $89.99 (10-up) $88.15
2.4GHz Wireless USB Audio System
This wireless USB audio system allows you to stream audio from your computer at distances up to 150'. A simple three step process is all it takes for you to be able to listen to your playlist on any set of powered speakers, AV receiver, or a set of headphones. Features: CD quality 16 bit/44.1KHz stereo No driver required RCA and 3.5mm audio output Includes: AC adapter (for receiver) RCA to 3.5mm cable
Order # 80-7300 ONLY $39.99

Wireless Cable TV Kit

This unique kit allows NEW! you to watch cable or satellite TV on a main television and at the same time send the signal to a second TV. That TV can then watch channels independently of what is being viewed on the main TV. Features: Send cable, satellite, DVDs, TiVo, DIRECT TV and more to televisions anywhere in the home Watch a different channel than the main TV No additional cable boxes or video distribution required No wires to run, no holes to drill Works through walls, floors, doors and windows Four selectable frequencies to eliminate the interference Extra receivers available for multiple TVs
Order # 80-7265 ONLY $189.95
Powerline Stereo Audio System
VideoConnection Wireless Audio/ Video Transceiver
The VideoConnection uses state of the art 2.4GHz technology to transmit crisp clear video and audio signals through the walls and between the rooms in a house. The hidden high gain antenna reduces interference. Use the VideoConnection to send the audio/video signals from a satellite receiver, VCR, camcorder, DVD or other video source to a TV in a different room.
Order # 33-4725 ONLY $106.00
Stream audio to any room in the house Set up a multiroom audio system using the power lines in your home No need for expensive installations or wiring Listen to audio anywhere in the house Features: Brings music to multiple rooms without expensive audio cable installation Enjoy whole-house music in any room in your home of office Stream music to up to four Powerline Stereo Audio Adapters from one Powerline Stereo Audio Station Builtin SRS technology delivers optimum sound quality Three ways of connecting your audio source to your Powerline Stereo Audio Station: an iPod or audio source with RCA or 3.5mm audio connection Remote access your iPod for volume control, track selection and to play and pause Uses HomePlug powerline technology for a robust problem-free digital connection

Order # WCS-999 (1-3) $135.95 (4-up) $133.85

Table-Top Tripod

Maximum height: 9"; folded height: 6" Ball head Three section, all-metal construction Head is fully adjustable
Order # PJ44209 ONLY $7.99

Tripod QuickKonnect

Add a quick release feature to your tripod. Spring loaded lever for fast secure locking and release. Removable video camera locking pin for use with SLR cameras. Mfr. #SVR.
Order # 80-3190 ONLY $7.06
Night Vision LED Video Light
Features: 36 super bright infared LEDs, works up to 30' Shoe mount compatible with all pro and consumer camcorders Interlocking design for connecting lights together 50,000 hour lamp life, quick recharge capability Optional mount #80-3185 available
Order # 80-6885 Mfr. # SL-20IR (1-9) $46.49 (10-up) $44.24
Ultra Bright LED Video Light
Features: 36 super bright LEDs Shoe mount compatible with all pro and consumer camcorders Interlocking design for connecting lights together 50,000 hour lamp life, quick recharge capability Optional mount #80-3185 available
Order # 80-6880 Mfr. # SL-20LX (1-9) $41.49 (10-up) $38.68

Batteries and Chargers

Camcorder Batteries

VHS NIMH batteries

Order # P-HHR-V20A/1B P-HHR-V40A/1B P-HHR-V60A/1B Description ONLY 2 hours $53.hours 62.hours 107.96 C A B A B C D

Battery Pack

Two hour rechargeable battery pack. Lead acid 12V/2.3Ah. This battery pack is used with most of the older VHS camcorder models including the PV series from Panasonic and many other brands. Dimensions:.95" (W) x 7.17" (L) x 2.55" (D). Mfr. #PV-BP88.
Order # P-PV-BP88A/1H ONLY $54.00
Replacement Camcorder Batteries
Replacement batteries for popular JVC camcorders See MCMelectronics.com for compatibility information
Fig. A B C D E F G H J K L Order # BN-VF707US BN-V20U BN-VF733US BN-VF823USM BN-V400U BN-V408U BN-V416U BN-V428U BN-VF808U BN-VF815U BN-VF714US Volt/Amp 7.2V/700mAh 6V/2000mAh 7.2V/3300mAh 7.2V/2190mAh 6V/4000mAh 7.2V/800mAh 7.2V/1600mAh 7.2V/2800mAh 7.2V/730mAh 7.2V/1460mAh 7.2V/1400mAh ONLY $66.45 47.45 99.95 86.83 94.95 39.95 79.95 85.49 49.42 71.75 77.95
Original Replacement Battery Chargers

Order # 80-7015 (1-9) $19.99 (10-up) $17.55

Universal Remote RF

RC64 DIRECTV brand universal remote control Includes RF capability for operating receivers anywhere within the home (not all receivers are RF capable) Operates DIRECTV standard receivers, HD receivers or DIRECTV DVRs This is a true one size fits all solution regardless of brand or age of equipment Also operates up to three additional devices including TV, DVD and CD or audio Includes RF antenna and two AA batteries
Order # 80-7020 (1-9) $24.99 (10-up) $23.55
Big Button Universal Remote
Large buttons for easy reading DIRECTV brand universal remote control Operates DIRECTV standard receivers, HD receivers or DIRECTV DVRs This is a true one size fits all solution regardless of brand or age of equipment Also operates up to three additional devices TV, DVD and CD or audio Requires four AAA batteries not included
Order # 80-7025 (1-9) $18.99 (10-up) $18.25
Six Device DVR/PVR Universal Remote

46 device

One for All Remotes
Comfort Series Learning Universal Remote Control
4DVR control 4Macros 4Supports subchannels

Cable Replacement Remote

45 device 4DVR control 4Supports most cable systems 4Supports subchannels
Control up to six TV, VCR, cable, SAT (DBS/DSS), DVD, RCVR/AMP. PVR compatible with: TIVO, Replay TV/ Sonic Blue, Sony, Philips, Keen Picturein-picture functionality Lifetime warranty Requires four AA batteries Mfr. #URC-6131N
Order # URC-6131 ONLY $17.99
Digital sub-channel capability Learning capability Macro capability Red, yellow, blue, green keys for DirecTV and cable TV extended functionality PIP and swap buttons Aspect ratio button Requires two AA batteries (not included)
Order # OARC03G OARC04G OARC05G Description 3 device 4 device 5 device ONLY $15.99 23.99 12.99
Learning and macro capable One touch power on/off button can control up to five devices with one button push Digital sub-channel capable Buttons for DirecTV or cable DVR controls Requires two AAA batteries (not included)
Order # OARP05S ONLY $15.99
Childrens Universal Remote Control
Simple one touch kids programming Eight preprogrammed DirecTV kids channels Reprogrammable for cable box control Star and moon keys available for additional favorite channels Fun, customizable image compartment Requires two AAA batteries (not included)

Order # 80-7055 (1-9) $142.00 (10-up) $118.75

80-7050

80-7070

(1-9) $19.99

(10-up) $16.25
Universal Remote MRF100B RF Blaster
The MRF100 Blaster RF controls up to six devices from anywhere within 100 range, through walls/floors. Features: Increase A/V operating range, no more pointing Compatible with the RF10, RF20 and RF30 remote controls Control outof-sight A/V components through doors, walls, cabinets and floors RF receiver transmits IR signals with room filling front blasters Includes six mini flashers with 10 wire leads and mounting kit
(1-9) $50.99 (10-up) $48.92
R7 Seven Device Universal Remote Control
The URC R7 pre-programmed and learning remote control sends IR (infrared) commands to all home theater A/V equipment and can replace up to seven different remote controls. With MacroPower, you can program the R7 to turn up to seven components ON or OFF with the press of one button. Two AA batteries required (included).

80-7065

(1-9) $29.99

(10-up) $23.55

80-7080
Ready-to-Use TV Remotes For All Major Brands
Need a remote to replace the original remote that came with your TV, but hate the thought of spending $20, $30 or even $40? Fed up with those complicated, expensive, programmable remotes with functions youll never use? Looking for a simple, basic remote to operate your TV? MCM has the total solution with these incredibly affordable remotes. Features: Ready to use, no programming needed, just point and click Sleek silver finish, small and easy to handle Designed to work with televisions manufactured after 1990 Inexpensive solution to lost remotes Manufactured to the highest quality standards Requires two AAA batteries, MCM #292-025, (not included)
Order # 32-23430 32-23435 32-23440 32-23445 32-23450 32-23455 32-23460 32-23465 32-23470 32-23475 32-23480 32-23485 Replaces Daewoo Hitachi JVC LG Panasonic Philips RCA Samsung Sanyo/Fisher Sharp Sony Toshiba (1-3) $9.67 8.99 8.99 9.49 8.99 8.99 8.99 8.99 8.99 9.67 8.99 8.99 (4-9) $8.59 7.99 7.99 8.16 7.99 7.99 7.99 7.99 8.45 8.59 7.99 7.59

Harmony Remotes

Harmony 510 Universal Remote
Throw away the cheat sheet and get intuitive. One-touch control over all your home entertainment components. Want to watch a movie? Play some music? Just say so and let Harmony do the rest. Its easy enough for the houseguests, for the babysitter, for the kids and of course for you Features: One-touch control: Choose the activity you want to do, not the device (component) you want to turn on Up to five components: Control video, audio, gaming-even lights and appliances Customizable buttons: Put your most frequent activities at your fingertips Sound and picture buttons: Configure your preferences with just one button Fully backlit controls and LCD display: Navigate even in movie-theater darkness

Order # 80-7090 (1-9) $141.00 (10-up) $139.65

Sony Remotes

Big Button Universal Remote Control
The channel surfing solution! Packed with features that put you in charge of your TV. Features: Controls two devices, TV and cable box Large buttons and simplified functions for ease of use Ergonomic design fits comfortably in your hand Three minute memory back-up Requires two AA batteries, not included (#292-015) Mfr. #RM-EZ4
Order # RM-EZ2 ONLY $9.99
Controls up to seven components Pre-programmed codes are compatible with most brands Easy-to-use button layout TV, VCR, DVD on-screen menu Recall function Memory back-up function prevents code numbers being erased Requires two AA batteries, not included Includes: Manual, component code number list and warranty card
Order # RM-V310 ONLY $13.99
Harmony One Universal Remote
We know who you are. You have a halfdozen remotes on the coffee table. And youre the only one in the family who knows how to use them. We can help. Enjoy a full-color touch screen. Intuitive button layout and an ergonomic design. So easy-to-use, the whole family will love it. Features: One-touch control: Choose the activity you want to do, not the device (component) you want to turn on Up to 15 components: Control video, audio, gaming-even lights and appliances Sculpted, backlighted buttons in logical zones: Allow you to find the right channeleven in the dark Sound and picture buttons: Configure your preferences with just one button Rechargeable design: Eliminates the worry about replacing batteries
Order # 80-6990 ONLY $301.00
Universal Remote Controls
Welcome Magnavox! The popular American-brand is back. All remotes feature closed caption, sleep timer, code search and saver, previous channel and mute functions. Two AAA batteries required, not included. *Controls VCR or DVD.
Feature MRU1300/17 TV VCR * Cable DVD * Satellite CD Advanced DVD functions PIP with toggle Menu functions Learning Order # (1-9) MRU1300/17 $8.99 MRU2500/17 13.99 MRU2500/17 (10-up) $7.19 12.49
Control up to eight components One touch system control that synchronizes operational status on remote and alternate components Learning function for programming from other remotes
Order # RM-VL600 (1-9) $19.99 (10-up) $18.45
Acoustic Research Remote Control
Harmony 1100 Touch Screen Remote
Step up to the ultimate in universal remotes. Experience a new standard in simplicity with even the most complex components. With just one touch you can start watching, listening or playing. And youll be proud to display the Harmony 1100s sleek brushed dark aluminum and iconic color LCD. Features: Control up to 15 components: Video, audio, gaming-even lights and appliances Learning port: Add favorite functions from an old remote just by pointing it at your Harmony 3.5" color touch screen: Navigate through all your options with ease. Charging station: Put your remote in its own home and forget about changing batteries Incredible compatibility: From laser disc to Blu-Ray disc, find your components in our 175,000 device database

Insignia (C) #07640KL050
LG (D) #6710V00102K Order # 9630170709 TV-5620-48
Panasonic (E) #P-EUR501455 Denon (A)
Philips (F) #313923810291 ONLY
ProScan (G) #0NEW-RMT-0258
RCA (H) #267163 ONLY $22.72 23.86 35.99 21.32 28.33 24.99 23.59 20.99 37.99 37.99

Sharp (J) #RRMCGA667WJSA

Order # ProScan (G) 0NEW-RMT-0258 0NEW-RMT-0068 RCA (H) RCA 273015 Sharp (J) RRMCGA667WJSA Sylvania (K) NF000UD NF018UD
Wish you still had the remote that came with your TV or A/V component? Do you miss all the functions of your original remote that a universal remote just cant do? MCM will make you smile again with our extensive line of original remote controls. We have access to the full line of remotes from the manufacturers listed to the left.

Dynex (B)

$118.75 118.75 73.92 13.95 6.25 32.95 7.61 8.97 45.90 19.53 20.00 20.00 20.00
Just a sampling is shown!
So if you dont see the remote you need, please contact our friendly account representatives for assistance or visit our website for our complete line.
Insignia (C) 07640KL050 LG (D) 6710V00102K Panasonic (E) P-EUR501455 P-EUR501371 P-EUR7737Z20 P-EUR7613Z40 Philips (F) 313923811631

Sylvania (K) #NF000UD

Business/Data Projectors
TX612 High Brightness DLP Multimedia Projector
41024 x 768 resolution 4High brightness 4VGA input
XGA Quiet Series DLP Projector
41024 x 768 resolution 42W speaker 42500 lumens
SVGA Quiet Series DLP Projector
4800 x 600 resolution 426db eco mode 42200 lumens
The Optoma TX612 delivers dazzling, vibrant images even in challenging ambient light conditions, making it the choice for nearly any classroom, large meeting room or conference room. The TX612 is equipped to easily deliver brilliant presentations with the latest color and image processing technologies from Texas Instruments. Dazzle your audience with this versatile performer. The perfect solution that provides a great image every time you turn it on! Features: Easy-to-read text, bright at 3500 ANSI lumens and 3000:1 high contrast ratio Standby VGA and audio pass-through feature reduces power consumption Wireless connectivity with optional dongle Rapid poweron and shutdown, saving you time Filter-free design means low cost of ownership Protect your investment, control panel lock and password protection allow you to customize security settings Inputs: Two VGA, S-video, composite video, stereo audio-in, RS-232 and USB

Order # TX778W (1-9) $2499.00 (10-up) $2449.02
Perfect for use in a school or business setting, the small, sleek and stylish Optoma PRO250X provides a combination of performance and affordability. Including features such as 2800 ANSI lumens, contrast ratio of 3000:1, lamp life of up to 4000 hours, filter-free design and low standby power consumption, the Optoma PRO250X will not only help you save on costs over time but also deliver a perfect, colorful, crisp image to captivate your audience. Features: 4000 hour lamp life Native XGA (1024 x 768) DLP by Texas Instruments with BrilliantColor Technology Bright images and high contrast ratio, 2800 ANSI lumens and 3000:1 contrast ratio (full on/full off) Filter-free design means low cost of ownership Rapid power-on and shutdown, no waiting High-definition resolution supported, up to 1080p Infrared remote Inputs: Two VGA Composite video S-video Audio
Order # PRO250X ONLY $679.00
The Optoma HD20 brings a new level of flexibility to your highdefinition home theater/multi-media experience. With true 1080p resolution, the HD20 delivers excellent color saturation and subtle details for superior image quality. With its sleek design and weight of 6.4 lbs., the Optoma HD20 is perfect for sharing big-screen movies, sporting events and concerts, or for taking your video gaming to the next level by connecting the HD20 to your favorite game console. Features: 4000 hour lamp life Bright at 1700 ANSI lumens and contrast ratio of 4000:1 Up to 300" screen size for large group viewing Backlit IR remote control Features Texas Instruments 1080p DLP chipset and BrilliantColor technology Inputs: Two HDMI Component Composite video VGA +12V trigger
Order # HD20 ONLY $1099.00

Travel/Mobile Projectors

Pico Mobile Device Digital Projector
Pico projectors utilize mini component technology to pack a full size projector into one that will fit in your pocket. Any iPod or device with a composite output is compatible. Features: Project images up to 60" 4 oz. weight with battery 1000:1 contrast ratio using Pico DLP technology Two hour battery life Includes: AC adapter, USB cable, A/V cable and iPod cable with 30 pin connector Two batteries Carrying pouch
Order # PK-101 ONLY $259.00
The Optoma PK102 pocket projector provides a whole new way to display media. Easily connects to your favorite personal media player and features 4Gb of internal memory. You can even display right from your laptops VGA connection. Features: Project images up to 60" 4 oz. weight with battery 1000:1 contrast ratio using Pico DLP technology Two hour battery life Includes: Male USB cable Standard A/V cable (RCA to mini-jack) VGA cable AC adapter Carrying pouch
Order # PK-102 ONLY $279.00
PRO150S Portable Series DLP Multimedia Projector
4800 x 600 resolution 42W speaker 4VGA input
Perfect for use in a school or business setting, the small, sleek and stylish Optoma PRO150S provides a combination of performance and affordability. Including features such as 2800 ANSI lumens and a high contrast ratio of 3000:1, the PRO150S will capture your audiences imagination. With lamp life of up to 4000 hours, filter-free design and low standby power consumption, the PRO150S will provide lower cost of ownership while delivering a perfect, colorful, crisp image. Features: 4000 hour lamp life Native SVGA DLP by Texas Instruments with BrilliantColor Technology Bright images and high contrast ratio, 2800 ANSI lumens and 3000:1 contrast ratio (full on/full off) Rapid on/off feature wont keep your audience waiting Protect your investment, control panel lock and password protection allow you to customize security settings Filter-free design means low cost of ownership Inputs: VGA S-video Composite video Audio

Order # PRO150S ONLY $569.00
TX7156 Micro Series Mobile DLP Projector EW330 Micro DLP Projector
Optomas EW330 is one of the lightest and brightest digital projectors yet. It combines the best in small size, brightness and BrilliantColor technology in a sleek, compact design. Perfect for the mobile presenter, the EW330 is the ideal grab and go solution. Features: WXGA (1280 x 800) resolution DMD DLP chipset 16:10 wide format 2.4 lbs. Inputs: HDMI, VGA, S-video, composite and USB
Order # EW330 ONLY $999.00 4Only 3.2 lbs. 41024 x 768 resolution 41 watt speaker 4HDMI and VGA inputs
See Section 7 Audio/Video Service Products for replacement projector bulbs.
Perfect for a school or business setting, the TX7156 from optima weighs in at only 3.2 lbs. Featuring 3000 ANSI lumens of brightness, the TX7156 breaks the portability/brightness barrier. Whether traveling across the country or down the hall, the TX7156 provides images that will capture your audiences attention. Features: 1024 x 768 native resolution 2500:1 contrast ratio Presentation remote with mouse control and laser pointer Inputs: HDMI v1.3, composite video, VGA, S-video, USB, audio in.
Order # TX7156 ONLY $929.00

Motorized TV Mounts

Represented in 59 countries, OmniMount products have been recognized for groundbreaking design, high-quality and long-term reliability. The OmniMount product line features hundreds of mounting solutions that cover the demands of nearly every application, from the smallest speaker to the largest flat panel video monitor.

#50-9485

Remote

Lift Mount

Compact design Made to be installed into a custom cabinet (cabinet not included) Chain-driven mechanism offers maintenance-free and virtually silent operation (less than 50dB) Lift column extends completely in 15 seconds Remote controllable Fits most panels 37''~42'' up to 150 lbs. Vertical lift: 36.5'' Universal & VESA compliant: 100 x 100 to 400 x 800 Mfr. #Lift42
Order # 50-9495 ONLY $999.00

Motorized Mounts

State-of-the-art remote controlled motorized mounts that allow you to tilt, pan and swivel flat panels with the touch of a button Remote controllable via IR (2 memory) and RS-232 (3 memory) programmable positions Safety mechanism stops motion when movement is obstructed Virtually silent operation (40dB) Easy to install and use Includes installation template and level Pans 20 right and left Tilts 0~15

Heavy-Duty 20" Safety Strap
Strongly recommended upgrade to secure difficultto-attach monitors and TV/VCR combinations.
Order # 80-2225 ONLY $17.99
Tilting Television Mounts

Silver

Flat Panel Tilt Mount
A reliable, streamlined tilting mount offering multiple user-friendly features for most flat panels. Lift n Lock for easy installation Sliding lateral on-wall adjustment Tilts up to 15 for better viewing angle Open architecture for trim out Universal mounting rails Locking system Double stud mounting Includes installation template and grade 5 hardware kit
Order # 50-8020 50-8021 50-7985 50-7986 Mfr. # 37FB-T S 37FB-T B 54FB-T S 54FB-T B TV Size 23"~37" 23"~37" 37"~60" 37"~60" Capacity 80 lbs. 80 lbs. 175 lbs. 175 lbs. Color ONLY Silver $59.99 Black 73.99 Silver 89.99 Black 89.99
Heavy-Duty Fastback Tilt Mount
A reliable, streamlined tilt mount ideal for basic installations for most flat panels. Lift n Lock system for simple installation Tilts up to 15 for better viewing angle Sliding lateral on-wall adjustment Universal mounting rails Locking system Open architecture for trim out Single or double stud mounting Low mounting profile Includes installation template and grade 5 hardware kit
Order # 50-8096 50-8115 50-8116 50-8055 50-8056 Mfr. # 17FBHD-T B 37FBHD-T S 37FBHD-T B 63FBHD-T S 63FBHD-T B TV Size 13"~24" 23"~37" 23"~37" 37"~63" 37"~63" Capacity 40 lbs. 80 lbs. 80 lbs. 200 lbs. 200 lbs. Color Black Silver Black Silver Black ONLY $49.99 69.99 69.99 149.00 149.00

Medium Tilt Mount

4For panels 23"~36" 4Max weight: 165 lbs.
Tilts up to 15 for improved viewing angle Universal for mounting holes spaced up to 19" wide 212" mounting profile For 16" or less stud spacing only Double stud mounting Includes hardware Black
Order # 50-9160 ONLY $39.99

Large Tilt Mount

4For panels 36"~55" 4165 lbs. weight limit

Virtual Axis Wall Mount

4Fits most flat panels 15"~37" 4Max weight: 60 lbs.
For LCD monitors Tilts for easy adjustment of viewing angle Universal mounting up to 27" wide mounting holes 4" mounting profile Double stud mounting Includes all hardware Black

Order # Mfr. # 50-8101 17ARMHD B 50-8041 37ARMHD B 50-9450 54HDARM B 50-8051 54HDARMUA B 50-8061 63HDARMUA B #50-7971 TV Size Capacity VESA ONLY 13"~24" 30 lbs. 75/100$129.00 23"~37" 80 lbs. 100/200 179.00 32"~45" 125 lbs. 100/200 329.00 32"~45" 125 lbs. 100/200 399.00 42"~63" 200 lbs. 400/800 449.00

Virtual Axis Arm Mount

Virtual Axis 3D technology allows mount to tilt, swivel, pan and extend with fluid motion in every direction possible up to 15" from the wall Tilts effortlessly from -15~+15 Decorative cover conceals hardware for a finished appearance Includes two TV brackets: Large (VESA 100/200) and small (VESA 100/75) Accommodates most 15" to 37" LCD TV or monitor up to 60 lbs.
Order # 50-4446 50-4448 Mfr. # MF215-S1 MF215-B1 Color Silver Black ONLY $99.99 119.00
Multi-positioning arm that folds flat or extends out for better viewing angles For LCD monitors and TVs VESA 75/100/200 compatible 5"~1612" profile Easy screen tilting with Cam Box mechanism Piano black Mfr. #NXL503
Order # 50-8118 ONLY $129.00

LCD Swing-Arm Wall Mount

Unique dual joint design facilitates tilting, rotating and swiveling to view your flat panel display from any angle. Features: Low profile design with silver finish Fast and easy wall mounting 30 tilt and a 180 swivel Includes stud mount wall plate, monitor plate and hardware kit Meets VESA 75 and 100 mounting patterns. Ideal for LCD monitors up to 19" Note: Do not exceed 30 lb. maximum load limit.
Order # 82-11341 ONLY $31.99

#50-9510 #50-7981

Cantilever Arm Mount
A reliable, streamlined articulated retractable mount offering multiple user-friendly features for most flat panels. Screen leveling adjustment Tilts from -20~+25 for better viewing angles Rotates for portrait or landscape orientation Locking system Single stud mounting Includes installation template and grade 5 hardware kit
Order # 50-7966 50-7971 50-7981 Mfr. # 17ARM B 37ARM B 48ARMUA B TV Size 13~24 23~37 32~50 Capacity 30 lbs. 80 lbs. 125 lbs. VESA 75/100 75/100/200 Universal ONLY $73.99 146.00 259.00

Moda Echo A/V Furniture

#50-9500 #50-9505

Cable tunnels

Two standing options for LCD or DLP televisions, and a matching component tower Clean lines and a dark espresso finish echo a modern aesthetic Open area shelves accommodates multiple components Neatly route and organize wires through cable management channel Chrome legs accent dark finish Rubberized feet protect floors

Order # MDR-NC6 (1-3) $45.99 (4-up) $42.95
Infrared Wireless Stereo Headphone System
Get ready to rock with Sonys wireless headphone system. Features: Complete kit including transmitter and headphones Lightweight, open-air design30mm drive units for deep base Up to 60 hours of battery life with with an optional alkaline battery, or up to 35 hours of battery life with the supplied NiHM rechargeable battery Transmission range up to 24' Battery is automatically charged by placing headphones on the cradle Transmission coverage angle up to 90 Easy connection to home audio system, TV or VCR
Order # MDR-IF240RK (1-3) $56.99 (4-up) $52.95
Built-in inverting amplifier electronically cancels out all ambient sounds near 300Hz. This is perfect for eliminating background noise commonly heard near office machines, in vehicles and commercial jets. 40mm cobalt magnet drivers produce full 20Hz~20KHz frequency response, further enhancing the sound quality of any sound source. Soft padded ear cushions provide hours of comfortable use, and removable 6' cord is terminated with a standard 3.5mm plug. Adapters are included to convert dual mono airline type plug, as well as standard 14". Specifications: Impedance: 32ohm Sensitivity: 110dB Active noise reduction level: 15dB Requires AA battery (#292-015), not included Display packaged for resale
Order # 35-2200 MSRP $69.95 (1-3) $39.99 (4-11) $35.95
QuietPoint Active Noise Canceling Headphones
Full size headphones effectively reduce background noise by up to 85% while offering superior audio quality. Ideal for use with an mp3, CD, and DVD player, as well as in-flight entertainment systems, Audio-Technicas ATH-ANC7B QuietPoint closed-back headphones deliver clear, highresolution sound with impactful bass, detailed midrange, extended treble and accurate imaging in an immersive sound field. Features: 40mm driver Frequency response: 10Hz~25KHz 3' or 5' detachable cord with 3.5mm plug Includes: " adapter, airline adapter, AAA battery, and carrying case
Order # 35-2102 ONLY $199.00

DJ Headphones

Studio Monitor Series DJ Headphones
Monitoring headphones for DJ and remix use Swivel earcup allows easy single sided monitoring on shoulders 50mm driver unit for high quality sound Neodymium magnet for powerful bass response Resists high power input up to 3000mW Sleek metallic finish Compact foldable design Coiled cord Impedance: 24ohm Frequency response: 5Hz~30KHz Sensitivity: 107db/mW Cord length: 9.8' Weight: 10.6 oz. Goldplated UniMatch plug

Order # MDR-V700DJ (1-3) $129.95 (4-up) $123.55

Earbud Headphones

Clipstyle Headphones

Compact Stereo Ear Buds

Ideal replacements for iPods and similar items. Set includes three pairs of soft silicon cushions. 4' cord is terminated with a standard 3.5mm plug. Display packaged for resale
Order # 35-2210 MSRP $9.95 (1-3) $5.99 (4-11) $5.39
Clip Style Stereo Ear Buds
Ideal for use with any portable A/V device, the over-ear clip helps hold ear buds in place while excercising or working. 13mm drivers are slightly larger than conventional earbuds, offering improved frequency response. 4' cord is terminated with a standard 3.5mm plug. Specifications: Impedance: 16ohm Sensitivity: 105dB Display packaged for resale
Order # 35-2215 MSRP $9.95 (1-3) $5.99 (4-11) $5.39
Headphones for DJ use Convenient travel-fold design for compact carrying Neodymium rare-earth magnet for rich and powerful sound Single-side monitoring Lightweight XBS Extra Bass System
Order # P-RP-DJ100 ONLY $26.99
Stereo Ear-Bud Headphones
Large diameter driver units 14.8mm (916") Neodymium rare-earth magnet for rich and powerful sound XBS port increases bass response Frequency response 10Hz~25KHz
Order # P-RP-HV152 ONLY $4.46

Home Audio Headphones

Stereo/Mono Headphones
Great for schools or amateur projects, these headphones are switchable stereo/mono with an independent volume control Adjustable headband and highly cushioned earpads 40mm super thin diaphragm drive units 32ohm Frequency response: 20Hz~18KHz Sensitivity: 105dB SPL at 1KHz 2% 3.5mm to 14" adapter included Display packaged for resale
Order # 35-455 MSRP $12.95 (1-3) $9.49 (4-9) $8.49 (10-up) $7.39
Full Size Lightweight Stereo Headphones
Full size headphones feature large 40mm diaphragms, for excellent sound quality. Featherweight design and specially contoured ear cushions ensure long term comfort. These headphones are the choice when optimum sound quality is needed for long term use. Specifications: Frequency response: 20Hz~20KHz Impedance: 32ohm Sensitivity: 105dB Display packaged for resale
Order # 35-2230 MSRP $19.95 (1-3) $9.99 (4-11) $8.99
Full Size Stereo Headphones with Volume Control
Rugged full size headphones feature large 40mm diaphragms, for excellent sound quality, and beefed up construction for durability. They are ideally suited for education use. Smooth fluid rotary controls are located in each ear cup allowing independent left/right volume adjustment. Heavy-duty 6' single entry cord stays out of the way, and is terminated with a right angle 3.5mm plug. Soft padded ear cushions ensure snug comfortable fit. Specifications: Frequency response: 20Hz~20KHz Impedance: 32ohm Sensitivity: 105dB Display packaged for resale

19.99 17.95 18.99 18.25 7.79 7.29
4.61 4.61 4.61 4.61 9.21 8.15
4.17 4.17 4.17 4.17 8.39 7.33
19.99 18.50 8.15 8.15 8.99 8.99 3.06 8.15 8.15 7.47 4.61 7.33 7.33 8.09 8.09 2.52 7.33 7.33 6.95 4.17

12.49 11.30

Fig. Order # Type Mfr. # Comments F 40-1210 Sanyo ST-412D M 40-1345 Sanyo ST-6G Used in RS-07260 Y 40-1010 Sanyo/Fisher ST-07 Diamond Z 40-1050 Sanyo/Fisher ST-14 Also replaces Kenwood #N-67, Marantz #TT-151, Sansui #SN-P212, diamond AA 40-1040 Sanyo/Fisher ST-67 Diamond BB 40-840 Sanyo/Fisher ST-38D Also replaces Audio-Technica #AT892 CC 40-1045 Sanyo/Fisher ST-G9 Moving magnet, diamond Toshiba #ST-G10 N-45, N-77, Sharp STY-143, Aiwa N-10 M 40-1345 Sears 89901 Used in 89381 D 40-1215 Sharp STY124 Denon DSN-63 DD 40-1240 Shure N21D Used in M7-N21D, M3, M7, M8 series DD 40-1240 Shure N3D DD 40-1240 Shure N7D EE 40-1225 Shure N75E EE 40-1225 Shure N75EJ Used in M75EJ type II DD 40-1240 Shure N8D FF 40-1230 Shure N95 Used in Shure M95 FF 40-1230 Shure N95D - 40-1245 Shure SS35C Used in SS35C - 40-1235 Shure VN35E Used in Shure V15 type III S 40-1235 Shure VN35D Raise or lower conical version of VN35E HH 40-560 Shure N-44 Diamond JJ 40-860 Shure N-70B Diamond JJ 40-865 Shure N-70EJ Diamond KK 40-580 Shure N-91 Diamond T 40-1325 Sonotone 2TS-N5T-7T Used in Sonotone 2T, 5T, 7T, 9980 T 40-1325 Sonotone 9987 LL 40-1320 Sonotone MS Used in 51I, 52T, 54T, 60T, 61T, 65T, 66T LL 40-1320 Sonotone MS77 LL 40-1320 Sonotone MSD MM 40-1335 Sonotone N16T MM 40-1335 Sonotone N18T-S77 T 40-1325 Sonotone N2T-S NN 40-1255 Sony ND127D NN 40-1255 Sony ND127P Used in Sony VX23P PP 40-1280 Sony ND133G Used in VL-300 QQ 40-1250 Stanton D71E Used in L717E - 40-1320 Toshiba Used in Y590 B 40-1110 Toshiba N36C Used in C-36, ADC RML-LL38 linear, Aiwa-AN-F10 denon M 40-1345 Toshiba N-40 RR 40-1295 Zenith S-82621 Used in 142-167, Mag., Mar Pana., Sharp, etc. F 40-1210 Yamaha N-6800 Used in CQ-5600, Akai RS150, Hitachi
(1-9) (10-up) $12.49$11.30 4.61 4.17 8.19 7.91 7.68 7.07 11.49 10.02 10.99 10.55 7.47 6.95
4.61 8.15 8.59 8.59 8.59 12.49 12.49 8.59 8.15 8.15 8.03 23.99 23.99 8.27 6.50 9.21 9.89 3.06 3.06 3.06 3.06 3.06 3.59 3.59 3.06 5.63 5.63 8.70 8.15 3.06 9.99 4.61 7.99
4.17 7.33 7.20 7.20 7.20 11.39 11.39 7.20 7.33 7.33 7.23 21.50 21.50 7.07 6.25 8.96 8.52 2.52 2.52 2.52 2.52 2.52 3.03 3.03 2.52 5.26 5.26 7.59 7.33 2.52 8.96 4.17 -