HOW TO PROGRAM VOLUME BUTTON ON CABLE REMOTE CONTROL UR5U brighthouse comcast time-warner wow Remote ...
How to turn on the DVD player and use the INPUT function on the Charter Cable universal remote.
Universal Remote Sleek and design keypads Using a VIDEO SOURCE button on the keypad. Using a PIP key, to remove ...
... the majority of TVs, VCRs, DVDs and AUDIO equipment on the market as shown below. CABLE : Cable Converters TV : Televisions DVD : DVDs, TV/DVDs, VCRs and TV/VCRs AUX : ... correct 3-digit
To return to original state: If you wish to restore the CABLE channel control in TV mode, repeat the above steps but press [CBL] in ... Programming the Remote Control 3 Operations
DEFAULT STATUS: Component Default: CABLE Channel Default: CABLE channel +/- and numbers operate through the CABLE box. You have the option of controlling channel +/and ... TV, VCR or DVD. Refer to section F for programming steps. Volume Default: CABLE volume +/- and mute operate through the TV. You have the option of controlling volume ... through the Cable box, VCR or DVD. Refer to section G for programming steps. There are ... Set-up Code Number: Set-up Code Number:
6 Set-up Code Tables
GE GEM GIBRALTER GOLDSTAR GRUNPY HAIER HALL ...
Operating Instructions For 4 in 1 STB Remote Control
The remote control is designed to operate the Motorola DSR400 Series Digital Receiver. You can also control the majority of TV, VCR/DVD and AUDIO equipment on the market as shown below. STB TV VCR AUX : Digital Receiver : Televisions : VCRs and DVD : Audio Receivers, DMX & DCR, TIVO, etc.
3 Button Functions
5 Programming the Remote Control
A. Three-Digit Code Programming Method.
The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of Audio/Video equipment. The three-digit code numbers are listed in the code table of the instruction manual. STEP1 Turn on the equipment you wish to program. (TV, VCR, DVD or AUX). STEP2 Press the [DEVICE] button (TV, VCR or AUX) to be programmed and the [ENTER] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed. *Tip : The device LED will stay lit for 20 seconds. ...