2-in-1 Universal Remote Control

Owners Manual

Please read before using this equipment.

X Contents

Features... 3 Introduction.. 4 Preparation... 5 Installing Batteries.. 5 Setting Up Your Remote Control.. 6 Operation... 8 Converting the CBL Key.. 8 Reassigning the CBL Key.. 8 Restoring the CBL Key.. 9 Using Volume Lock.. 9 Setting Volume Lock To Cable Converter.. 9 Resetting Volume Lock To TV.. 9 Cancelling Volume Lock. 9 Manual Code Search.. 10 Checking Your Code.. 10 Manufacturers Codes.. 12 Troubleshooting... 22 Care... 22 Specifications.. 23

Contents

X Features
Your RadioShack 2-in-1 Universal Remote Control allows you to control both your TV and cable converter with one easy-to-use, compact remote control. Its features include: Last Station Recall lets you go from the station you are currently watching to the last one at the touch of a button. Large, Easy-to-Use Buttons improve remote control access and operation. +100 Key lets you access the higher cable channels. Powerful Infrared Beam lets you operate your TV or cable converter from a greater distance than many other remote controls. Extensive Code Library contains remote control codes for virtually every television and cable converter made today, including discontinued devices. For your convenience, the remote control has been preset to control an RCA TV (compatible with code 0047) and a Jerrold cable converter (compatible with code 0003). To control other brands, you must do some simple programming after you install three AAA alkaline batteries (not included). For best results, please read and perform all remaining instructions. Also, keep these instructions for future reference.

Features

X Introduction
Your Radio Shack 2-in-1 Remote Control was designed to control the most commonly-used functions on your TV and cable converter. When you set up the remote control, its command keys operate the same as the keys on your original TV and Cable remote controls. For example, the POWER key works like the POWER ON/OFF key on your original TV remote control. Key
P POWER VOL + VOL CH + CH LAST MUTE ENTER (09) + 100 A/B TV CBL

Function

Use to program the remote control. Operate the same as the corresponding keys on your original remote controls.
Use to set up the remote control to replace your original remote controls. Also use in normal operation to remotely select a desired device to control.
Note: This remote control might not be able to duplicate some of your original remote controls seldom-used functions.

Introduction

X Preparation

INSTALLING BATTERIES

Your remote requires three AAA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries. When batteries become low, the remote control will cease to operate in order to protect stored settings. Replacing the batteries with new ones will restore full functionality and will not require you to reprogram your remote control. Cautions: Use only fresh batteries of the required size and recommended type. Do not mix old and new batteries, different types of batteries (standard or alkaline). Do not use rechargeable batteries. Do not press any of the remote controls keys while installing batteries. 1. Press the battery compartment covers tab and lift off the cover. 2. Place the batteries in the compartment as indicated by the polarity symbols (+ and ) marked inside. 3. Replace the cover. When the remote controls range decreases or it stops operating properly, replace the batteries. Warning: Dispose of old batteries promptly and properly. Do not burn or bury them. Caution: If you do not plan to use the remote control for a month or longer, remove the batteries. Always remove old or weak batteries. Batteries can leak chemicals that can destroy electronic parts.

Preparation

Note: Do not place objects on top of the remote control after you have installed the batteries. Doing so might depress keys for an extended period of time and reduce the battery life.

SETTING UP YOUR REMOTE CONTROL
You can use the remote controls device keys to control the following types of devices:
TV TVs CBL Cable converters
Your remote control is preset to an RCA TV (compatible with code 0047) and a Jerrold cable converter (compatible with code 0003). Not all RCA TVs and Jerrold cable converters will work with the preset codes. Some will require the other codes listed in Manufacturers Codes. Follow these steps to control other brand devices or to use a different RCA or Jerrold code. 1. Refer to Manufacturers Codes on Page 12 and write down the codes for the brand of device you want to program on the supplied label. Note: Some manufacturers might have several codes listed. Try each until you find the right one. If you cannot find the correct code, try performing a manual search (see Manual Code Search on Page 10). 2. Turn on your TV (or cable converter). 3. Press TV (or CBL). 4. Hold down P until the red light blinks twice, then enter the 4-digit manufacturers code for the desired device. When the red light blinks twice, the remote control has accepted the code. For example, to set up the remote control of a Panasonic TV (manufacturers code 0051), press TV, hold down P until the red light blinks twice, then press 5 1.

6 Preparation

Note: If you entered the code incorrectly, the red light blink once. 5. Point the remote control at your TV (or cable converter) and press POWER. The device should turn off. If the remote does not operate your device, try the other codes listed in Manufacturers Codes on Page 12 for your brand of TV or cable converter. You can also search to find a working code (see Manual Code Search on Page 10). 6. Repeat Steps 25 to program the other device (cable converter or TV).

X Operation

The command keys on the remote control work the same way as their counterpart keys on the original remote controls. However, they might be labeled differently. 1. Point the remote control at the device you want control and press its device key (TV or CBL). Then press POWER to turn on the device. 2. Press the desired command keys. 3. Repeat Steps 1 and 2 for the other device you want to operate. 4. To turn off the last device you selected, press POWER. To turn off the remaining device, press its device key, then press POWER.

CONVERTING THE CBL KEY

If you are not using CBL, you can reprogram it to operate a second TV.

Reassigning the CBL Key

1. Hold down P until the red light blinks twice. 2. Press 2. The red light blinks twice. 3. Press TV. 4. Press CBL. The red light blinks twice to indicate successful programming. 5. Program the converted CBL key with the code for the second TV (see Setting Up Your Remote Control on Page 6). Now each time you press CBL, you can control the second TV by pressing the desired function keys.

Operation

Restoring the CBL Key
When you are finished using your second TV, you can restore the CBL key to control a cable converter. 1. Hold down P until the red light blinks twice. 2. Press 2. The red light blinks twice. 3. Press CBL. 4. Press CBL again. The red light blinks twice to indicate successful programming.

USING VOLUME LOCK

Volume Lock is preset so that pressing VOL+/ or MUTE only controls your TVs volume, even if you press CBL. If your cable converter has a volume control, you can change this setting to add control of the cable converters volume.
Setting Volume Lock To Cable Converter
1. Hold down P until the red light blinks twice. 2. Press 3. The red light blinks twice. 3. Press CBL. The red light blinks twice. To control your cable converters volume, press CBL then VOL +/.
Resetting Volume Lock To TV
1. Hold down P until the red light blinks twice. 2. Press 3. The red light blinks twice. 3. Press TV. The red light blinks twice.

Cancelling Volume Lock

1. Hold down P until the red light blinks twice. 2. Press 3. The red light blinks twice.
3. Press VOL+. The red light blinks four times.

MANUAL CODE SEARCH

If your TV or cable converter does not respond to remote control commands after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. 1. Turn on your TV or cable converter. 2. Press TV (or CBL) once. 3. Hold down P until the red light blinks twice. 4. Press 1. The red light blinks twice. 5. Aim the remote control at the TV or cable converter and slowly alternate between pressing POWER and TV (or CBL). Stop when the TV or cable converter turns off. A working code has been found. Note: The remote control sends codes from its extensive library to the selected device, starting with the most popular codes first. Because of the librarys size, this procedure may take some time. When the red light blinks twice, the search of every code is complete. 6. Press P once to lock in the code. Note: If the TV turns off during the search, but does not operate after you lock in the code, begin the search again, pausing longer between key presses.

Checking Your Code

If you set up the remote control using the Manual Code Search procedure, follow these steps to find out what code is operating your TV or cable converter. 1. Press TV or CBL once. 2. Hold down P until the red light blinks twice. 3. Press 0. The red light blinks twice.

4. To view the code for the first digit, press 1. Count the number of blinks (for example, 3 blinks = 3) and write down the number. Note: The red light does not blink if the code digit is a 0. 5. Repeat Step 4, pressing 2, 3, and 4 to view the codes for each successive digit.

X Manufacturers Codes

The following list tells you which 4-digit codes to enter to set up the remote control. Notes: The remote control might not have every command featured on your original remote controls. Use the supplied label to record the manufacturers codes for your remote-controlled devices. A key on the remote control that has the same name as a key on your original remote control may have a slightly different function. RadioShack Cat. No.

Manufacturer

Code Number

Cable Converters

ABC Allegro Americast Antronix Archer 0003, 0008, 0014, 0017 0153, 0022, 0797 Bell & Howell Bell South Cabletenna Cableview Century Citizen Contec Emerson Everquest GC Electronics 0153 0153, 0207 16-1283 15-1285 16-1283

Manufacturers Codes

Garrard Gemini General Instrument GoldStar Goodmind Jasco Jerrold Memorex Movie Time NSC Oak Optimus Panasonic Paragon Philips Pioneer Pulsar Quasar RCA Radio Shack
0153 0015, 0797 0476, 0276, 0797 0015, 0153, 0315 0003, 0012, 0476, 0276, 0014, 0015, 0000, 0153 0144, 0533, 0015, 0303, 0315, 0883 0797

RadioShack Cat. No.

15-1288 16-1283, 15-1285A
Realistic Runco Samsung Scientific Atlanta Signal Sprucer Starcom Stargate Starquest TV86
0144 0008, 0477, 0017, 0021 0003, 0015 0015, 0063
Tandy Tocom Toshiba Tusa Unika Universal Viewstar Zenith
0153, 0022, 0207 0153, 0022, 0207 0063, 0258 0000, 0525, 0899

Televisions

A-Mark Akai Akiba Akura Alba Amstrad Asuka Audiosonic AOC Abex Admiral Aiko Akai Alaron America Action Anam Archer Astro Text Audiovox Basic Line Baysonic Belcor Bell & Howell 0030, 0019, 0093, 0451, 0180, 0003, 0092, 0154, 0016
Blue Sky Bradford Brockwood Broksonic BTC Bush CXC Candle Canton Carnivale Carver Celebrity Cimline Cineral Citizen Clatronic Concerto Contec Craig Crosley Crown CS Electronics Curtis Mathes
0019 0236, 0463, 0030, 0451, 0092 0060, 0030, 0056, 0039, 0180, 0047, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0145, 0056, 0016, 0039, 0166, 0466
Cybertron Daewoo Daytron Dainichi Denon Dumont
0218 0451, 0019, 0039, 0092, 0623, 0624, 0017, 0019
Electroband Electrohome Elite Emerson
0218 0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179, 0039, 0623, 0624
Envision Fisher Flint Fujitsu Funai Futuretech GBC GE Genexxa Gibralter GoldStar Goodmans GPM Gradiente Grunpy Hallmark Harley Davidson Harman/Kardon Harvard HCM Hikona Hinari Hisawa Hitachi ICE

0180, 0179, 0218 0047, 0051, 0451, 0093, 0282, 0178, 0017, 0030, 0019 0030, 0178, 0019, 0056, 0032, 0218 0053, 0056 0180, 0218 0145, 0056, 0016, 0032, 0409 0218
ICEs Infinity Inteq Intervision Irradio Isukai JBL JCB JVC Kaisui KEC KTV Kenwood Konka Lifetec LG LXI Logik Luxman MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola
0053, 0180 0180, 0030, 0039 0030, 0047, 0054, 0154, 0156, 0056 0150, 0030, 0178, 0019 0060, 0030, 0019, 0056 0054, 0030, 0054, 0178, 0145, 0003 0154, 0250, 0463, 0150, 0178, 0056, 0016 0047, 0017, 0051, 0039, 0093, 0150, 0178, 0019 0093
Multitech NAD NEC NTC Nikkai Nikko Onwa Optimus
0180 0156, 0178, 0166 0030, 0019, 0218 0030, 0178, 0092 0180, 0250 0166
Optonica Orion Orline Osaki Oso Osume Panasonic Penney
0093, 0165 0236, 0463, 0218 0051, 0250 0047, 0156, 0051, 0060, 0030, 0178, 0021, 0019 0056, 0039, 0003, 0032
Philco Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RCA Radialva
0054, 0463, 0030, 0145, 0030, 0019, 0019, 0039, 0047 0178, 0003, 0466 0017, 0019 0051, 0250, 0165 0047, 0051, 0093, 0019, 0090 0218

Radio Shack

0047, 0154 0165
16-232, 16-233, 16-236, 16-250, 16-260 16-252, 16-253, 16-262, 16-292 16-256, 16-263, 16-268, 16-280, 16-289 16-254, 16-255, 16-256, 16-265
0019, 0056, 0039, 0032, 0409 Realistic 0180, 0030, 0178, 0032, 0039 Roadstar Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Schneider Scimitsu 0218 0017, 0030, 0603 0180, 0019 0030, 0039, 0032 0060, 0030, 0178, 0019, 0056, 0019 16-288
Scotch Scott Sears Sentra Semivox Semp Sharp Shogun Signature Sony Soundesign Spectricon Squareview Starlite Standard Stenway Supreme Susumu Sylvania Symphonic TMK Tandy Tatung Technics Technol Ace Techwood Teknika
0178 0236, 0180, 0178, 0019, 0179 0047, 0054, 0154, 0156, 0178, 0179, 0056, 0093, 0165, 0180, 0178, 0054, 0178, 0056 0093, 0051, 0051, 0056, 0003 0054, 0180, 0150, 0060, 0019, 0179, 0056, 0016 0039, 0092

Telefunken Tensai Texet

Toshiba Totevision Tristar Vector Research Victor Vidikron Videologic Vidtech Wards
0154, 0156, 0218 0178, 0019 0054, 0165, 0030, 0178, 0021, 0019, 0179, 0056 0016
Watson White Westinghouse Yamaha Yoko Zenith Zonda

0218 0463, 0623, 0624 0030, 0017, 0463, 0016, 0092, 0624 0003

X Troubleshooting

If the remote control stops working after you have successfully tested the control for each device, or if you are unable to get the remote control to work at all, check these things: Be sure you press the device key for the device you want to control before you press any other key. Confirm that your IR devices are working properly by using the original remote control or the manual controls. Replace the batteries.
Keep the remote control dry; if it gets wet, wipe it dry immediately. Use and store the remote control only in normal temperature environments. Handle the remote control carefully; do not drop it. Keep the remote control away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Modifying or tampering with the remote controls internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your remote control is not performing as it should, take it to your local RadioShack store for assistance. If the trouble is affecting the telephone lines, the phone company can ask you to disconnect your remote control until you have resolved the problem.

Troubleshooting

X Specifications
Power.. 3 AAA Batteries IR Control Range... 26 ft 30 degrees Dimensions (HWD).. 61/2 21/2 11/4 In (32 mm) Weight (Without Batteries)... 3.2 oz (90.1 g) Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

Specifications

Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

We Service What We Sell

RadioShack Corporation Fort Worth, Texas 76102
15-1989 10/00 Printed in Korea

THE PERFORMANCE Y O U N EED TM
Universal Remote Control Receiver for Playstation 3
Please read this users guide before using your new Remote Control Receiver.

Users Guide

1500330

Package contents

PS3 USB Receiver Users Guide

Features

Enables you to control the DVD/Bluray Disc functions of your PlayStation 3 without having to use a game controller. Operating range up to 25 feet (7 m).6

1 Connect to PS3 Console

Turn on the console and plug the receiver into the USB port on the console. The receivers indicator flashes once.

2 Set up your Remote

Control
1. Check the Code List (Sony DVD/
Blu-ray DVD) of your universal remote to locate the brand code. controls users guide for set up.
2. Refer to your universal remote
3. After setup, press UP, DOWN, LEFT,
RIGHT, OK keys to make sure they can control the PS3 menu. The USBs end indicator flashes once when it receives a signal. to test the PS3 menu.
4. Press PLAY/PAUSE, REW, FF, STOP

nNotes:

After setup, if some universal remote keys dont function correctly, retry your remote control setup with the next code listed. If you cannot find a brand code for your device, your remote control may not function with the receiver.

Control Commands

Compare remote control commands to your PS3 console controller.
PS3 REMOTE PS3 (SIXAXIS) REMOTE PS3 L2 L1 R2 R1 UP DOWN LEFT RIGHT SELECT START e HOME REWIND PREVIOUS FORWARD NEXT UP DOWN LEFT RIGHT DISPLAY PLAY/ PAUSE TITLE TOP MENU STOP ENTER STOP OK/ENTER REW PREVIOUS FF NEXT UP DOWN LEFT RIGHT DISPLAY PLAY/PAUSE UNIVERSAL REMOTE

Specifications

Power Consumption..5V, 8mA-20mA
Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Ignition L.P. may cause interference and void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Limited Warranty

Ignition L.P warrants this product against defects in materials and. workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P MAKES NO. OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P Authorized Service Facility; (c) consumables such as. fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P will, at its option, unless otherwise. provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of Ignition L.P New or reconditioned parts and products. may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. IGNITION L.P EXPRESSLY DISCLAIMS ALL WARRANTIES AND. CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, IGNITION L.P SHALL HAVE NO. LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR

INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P HAS BEEN. ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. You may contact Ignition L.P at: Ignition L.P 3102 Maple Ave., Suite., 450, Dallas, TX 75201 02/09
For product support, call 1-866-315-0426
Complies with the European Unions Restriction of Hazardous Substances Directive, which protects the environment by restricting specific hazardous materials and products.
PlayStation is a registered trademark of Sony Computer Entertainment Inc.
Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you.
Get more from your audio and video equipment. See what youve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free. We know electronics can be intimidating. Auvio simplifies your experience by providing the right products, with the right specs, to work with your equipment. Be confident about your purchase: your new Auvio product incorporates the latest technology, is built to the highest quality standards, and reduces environmental impact by complying with RoHS environmental restrictions.
2010. Ignition L.P All rights reserved. Auvio is a trademark used by Ignition L.P.

Printed in China

07A10 1500330