Universal Remote Control M1056L
Here you can find all about Universal Remote Control M1056L like manual and other informations. For example: review.
Universal Remote Control M1056L manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Universal Remote Control M1056L please write about it to help other people. [ Report abuse or wrong photo | Share your Universal Remote Control M1056L photo ]
Universal Remote Control M1056L, size: 5.8 MB
Universal Remote Control M1056L
User reviews and opinions
|karass||6:16pm on Sunday, October 24th, 2010|
|Good remote If I had to do it all over again I would probably spring for the RF feature. Whitetail This remote is a replacement for an 880 that developed contact problems under the buttons. The setup was very easy.|
|stormlifter||1:44am on Thursday, October 14th, 2010|
|Harmoney One - Brilliant! Bought this when I finally got fed up of using 4 different controls for TV, Cable V+ box. Excellent remote I bought this based on the reviews here. I was not dissapointed. I echo what people have said in that.|
|nnecouk||10:00pm on Thursday, September 30th, 2010|
|Overpriced and will slow you down big time! At nearly three times the price of a 555 this is simply not good enough. JUST EXCELLENT HAVE THIS JUST OVER A YEAR NOW AND LOVE IT TO BITS.|
|singgyrly||10:27am on Monday, September 20th, 2010|
|I tried quite a few universal remotes, at no small expense, and each was a disappointment. With many the setup process was painstaking.|
|neltik||2:55pm on Saturday, August 7th, 2010|
|I love the Harmony One remote. It was very easy to setup all my devices & everything worked perfectly the on the first try.|
|sawoj||7:21pm on Thursday, June 3rd, 2010|
|I replaced my old Harmony remote that stopped working after 3 years (actually I just wanted an excuse to buy a new remote). I use this everyday and have not been disappointed yet. It controls a large home theater system and various music systems easily.|
|intenso||7:36pm on Saturday, May 29th, 2010|
|Not quite living up to expectations... I purchased the Harmony One from Amazon in November of 2009. TRULY A GREAT UNIVERSAL REMOTE This Harmony One remote, has pleasantly surprised me. After doing some research.|
|Robhlam||10:46am on Tuesday, May 18th, 2010|
|I have no idea what the previous reviewer was doing, but the Harmony remotes by Logitech are the best universal remotes made. The interface is simple,...|
|randydandy||8:10pm on Sunday, May 16th, 2010|
|I have a fairly complicated setup and some equipment that is ten or more years old.|
|quattro||4:25pm on Sunday, March 28th, 2010|
|Before I purchased this remote this remote I had to use a minimum of two remotes just to watch tv and I had to be home before anyone could watch a DVD...|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Atlas OCAP M1056.fm Page 1 Tuesday, March 24, 2009 4:45 PM
ATLAS OCAP 5-Device
Remote Control Tlcommande ATLAS OCAP 5 appareils
Users Guide Guide d'utilisation
PREPROGRAMMED FOR YOUR SET-TOP BOX PRPROGRAMME POUR VOTRE DCODEUR
Atlas OCAP M1056.fm Page 2 Tuesday, March 24, 2009 4:45 PM
TABLE OF CONTENTS
Introduction. 4 Features and Functions. 5 Key Charts. 6 Device Table. 8 Installing Batteries. 9 Programming Device Control. 10 Setting Up a Combo Unit. 11 Searching for Your Code. 12 Checking the Codes. 13 Programming Channel Control Lock. 14 Unlocking Channel Control. 14 Locking Channel Control to CBL. 14 Changing Volume Lock. 15 Unlocking Volume Control for a Single Device (Individual Volume Unlock). 15 Unlocking All Volume Control (Global Volume Unlock). 16 Locking Volume Control To One Mode (Global Volume Lock) 16 Programming Cable ID Lock. 17 Programming Macro Keys. 17 Programming a Macro Key. 18 Clearing a Macro Key. 18 Using the Master Power Key. 19 Programming the Master Power Key. 19 Using the Master Power Key. 20 Clearing the Master Power Key. 20 Re-Assigning Device Keys. 20 Clearing Custom Programming. 22 Activating Backlighting (Optional). 22 Troubleshooting. 23 FCC Notice. 24 Additional Information. 24 Manufacturers Codes (Codes des manufacturiers). 54 Setup Codes for Audio Amplifiers. 54 Setup Codes for Audio Receivers. 54 Setup Codes for Audio Accessories. 57 Setup Codes for Cable Boxes/Converters. 57 Setup Codes for DVD Players. 59 Setup Codes for DVD Recorders. 64 Setup Codes for DVD Combos. 64 Satellite Receivers and DVR/PVR Systems. 65 Setup Codes for Satellite Receivers. 65 Setup Codes for TVs. 67 Setup Codes for TVs (DLP). 75 Setup Codes for TVs (HDTV). 75 Setup Codes for TVs (LCD). 78 Setup Codes for TV/DVD Combos. 78 Setup Codes for TV/VCR Combos. 79
Atlas OCAP M1056.fm Page 3 Tuesday, March 24, 2009 4:45 PM
Setup Codes for TV/VCR/DVD Combos. 81 Setup Codes for VCRs. 82
Some Atlas OCAP models include backlighting for keypad illumination. If you have backlighting, you will see a light bulb on the SETUP key, as shown below. To Enable Backlighting 1. Press the SETUP key twice. 2. Backlighting will now turn on after any keypress. To Disable Backlighting 1. Press the SETUP key twice. 2. Backlighting is now off.
Atlas OCAP M1056.fm Page 4 Tuesday, March 24, 2009 4:45 PM
The Atlas OCAP 5-Device Remote Control by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, its packed with advanced features such as: Preprogrammed control to operate the cable converter supplied by your cable service provider Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke Programmable Macro Keys to allow you to activate certain keys in a specific order Channel Lock to lock channel selection only to the cable converter Volume Lock to lock volume controls to one mode or individual modes Device Key Re-Assignment to remotely control a second (duplicate) device Code Search to help program control of older or discontinued components Color-coded keys to quickly locate popular functions Code library for popular video and audio devices Backlighting (not available on all remotes) Before using the product, you will need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control and cable service.
Atlas OCAP M1056.fm Page 5 Tuesday, March 24, 2009 4:45 PM
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the Atlas OCAP 5-Device Remote Control and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see Device Table on page 8.
Atlas OCAP M1056.fm Page 6 Tuesday, March 24, 2009 4:45 PM
Key Charts Key
Function Use SETUP for all programming sequences. Also use to turn backlighting on and off, if applicable. Press PWR once to turn on or off a home entertainment device. For MASTER POWER control, see Using the Master Power Key on page 19. Press VCR, DVD, AUD, TV, or CBL once to select a home entertainment device to control. Also see Device Table on page 8. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. Use GUIDE to display the program guide. Press SETTINGS once to display available interactive services. Use INFO to display the current channel and program information. Use DAY+ (or DAY-) to move a day forward (or back) on your cable converters program guide. Use the Cursor keys to move the cursor in the program guide and menu screens and to navigate within the interactive service. Use OK/SELECT to choose options, PPV events, and to tune to programs from the program guide. Use PAGE+ (or PAGE-) to page up (or page down) through menu screens and the program guide. Use EXIT to exit out of your cable converters menu and guide. Use A, B, C, or D to access additional cable features (see your cable converters manual).
Atlas OCAP M1056.fm Page 7 Tuesday, March 24, 2009 4:45 PM
Function Use VOL+ (or VOL-) to raise (or lower) the audio volume.
Use FAV to cycle through your favorite channels stored in your cable converter. Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. Press MUTE once to turn the sound off or on. Press LAST once to recall the last channel. Press ON DEMAND to access Video on Demand services. Reserved for use as Macro keys (see Programming Macro Keys on page 17). Use to command your PVR/DVR cable box to instantly replay the last 7 seconds of a program you are watching. Press LIST once to display a list of recorded shows on your PVR/DVR cable box. Press LIVE to command your PVR/DVR cable box to return to watching live TV. In all modes except CBL, use REW, PLAY, FFWD, STOP, and PAUSE to control a VCR, DVD player, or a PVR (after selecting a desired device). To record in the VCR mode, press REC twice. In the CBL mode, use these keys to control the DVR/PVR functions of the set-top box. Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). For amplifiers/receivers, use the keypad numbers to select inputs 1 through 10.
Atlas OCAP M1056.fm Page 8 Tuesday, March 24, 2009 4:45 PM
Function Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes). Press SHIFT to access additional cable features (see your cable converters manual). Use PIP ON-OFF to switch the PictureIn-Picture feature on or off (if available on your TV or cable service). Use PIP SWAP to switch images and sound between the main and window pictures (if available on your TV or cable service). Use PIP MOVE to move the window picture to different positions in the main picture (if available on your TV or cable service). Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel (if available on your TV or cable service). In the CBL mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable. In all TV mode, use VIDEO SOURCE to watch TV or video/DVD programs on a desired device. For amplifiers/receivers, use VIDEO SOURCE to select an input source.
Device Table NOTE: Please refer to the table below when performing the instructions in Programming Device Control on page 10 or Setting Up a Combo Unit on page 11. After programming, the Atlas OCAP 5-Device Remote Control will be able to control the following types of devices: Device Key Controls these types of devices VCR, TV/VCR Combo, PVR (Personal Video Recorder), or extra DVD Player DVD Player, or extra VCR, TV/VCR Combo or PVR Audio Amplifier, Tuner, or Receiver
Atlas OCAP M1056.fm Page 9 Tuesday, March 24, 2009 4:45 PM
Controls these types of devices Television Cable Box (Converter) or Satellite Receiver
1. 2. 3. 4. On the back of the remote control, push the tab and lift off the battery cover. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. Align the covers keys with the cases holes and press the cover back into place. The tab should click when the cover is locked. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. When batteries need replacement, the remote control will cease to operate. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.
Atlas OCAP M1056.fm Page 10 Tuesday, March 24, 2009 4:45 PM
PROGRAMMING DEVICE CONTROL
The Atlas OCAP 5-Device Remote Control is preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section. NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and perform the instructions on Setting Up a Combo Unit on page 11. Also refer to Device Table on page 8 to find out which devices can be programmed onto each device key. If you have another brand of cable converter or a satellite receiver you would like to control, youll need to unlock the cable ID Lock before changing the converter code (see Programming Cable ID Lock on page 17). 1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. 2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice. 3. Use the Manufacturers Codes (Codes des manufacturiers) starting on page 54) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see Searching for Your Code on page 12). If the device does not have a PWR key, press the (Play) key.
Atlas OCAP M1056.fm Page 11 Tuesday, March 24, 2009 4:45 PM
Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page. VCR Code
Device Type:___________________ DVD Code
Device Type:___________________ AUD Code
Device Type:___________________ CBL Code
Device Type:___________________ TV Code
SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/VCR Combo or a TV/DVD Combo, you need to follow special steps to set it up. Perform the following instructions to control combo device: 1. For a TV/VCR Combo, turn on your TV/VCR Combo and insert a video cassette. (For a TV/ DVD Combo, insert a DVD). 2. On the remote control, press VCR once; it will blink once. Then press and hold SETUP until the VCR key blinks twice.
Use the Manufacturers Codes (Codes des manufacturiers) starting on page 54 to locate the brand name and enter the first four-digit www.urcsupport.com/atlasocap 11
Atlas OCAP M1056.fm Page 12 Tuesday, March 24, 2009 4:45 PM
code for your combo device (for example, TV/ VCR). If you perform this procedure correctly, the VCR key will blink twice. If the VCR key did not blink twice after entering the codes last digit, repeat steps 2 through 3 and try entering the same code again. If youve located a setup code that works for your combo device (for example, a TV/VCR Combo) and a separate TV code is also listed, youll need to program this code into the remote control to access volume control (see Programming Device Control starting on page 10). Aim the remote control at your combo device (for example, TV/VCR Combo) and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (Searching for Your Code starting on page 12). For future reference, write down each working device code in the boxes below: TV/VCR or TV/DVD Code
TV Code (if used)
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the Atlas OCAP 5-Device Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice. 3. Enter 1. The TV key will blink twice.
Atlas OCAP M1056.fm Page 13 Tuesday, March 24, 2009 4:45 PM
Aim the remote control at the TV and press PWR once. Press and release the CH+ key continuously, then stop when the TV turns off. In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Press PWR. The TV should turn on, then press SETUP to lock in the code. If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SETUP when the TV turns on. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g., VCR, DVD, AUD, or CBL) for the device you are searching for.
CHECKING THE CODES
If you have set up the Atlas OCAP 5-Device Remote Control by searching for your device code (on the previous page), you may need to find out which fourdigit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice. 2. Enter 0. The TV key will blink twice.
To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 11. If a code digit is 0, the selected mode key will not blink.
Atlas OCAP M1056.fm Page 14 Tuesday, March 24, 2009 4:45 PM
Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes on page 11. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., VCR, DVD, AUD, or CBL) for the device you are checking. Write down the codes in the appropriate boxes on page 11.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote controls channel-control capabilities are locked to the cable converter. The affected keys* are 1 through 0, CH+, CH-, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can deactivate this feature to allow full access to these keys in the TV and VCR modes. *NOTE: This feature does not affect the AUD mode. Unlocking Channel Control 1. On the remote control, press CBL once; it will blink once. Press and hold SETUP until the CBL key blinks twice. 2. Enter 3. The CBL key will blink twice.
Press CH- once. The CBL key will blink four times.
Now the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode. Locking Channel Control to CBL 1. On the remote control, press CBL once; it will blink once. Press and hold SETUP until the CBL key blinks twice. 2. Enter 3.The CBL key will blink twice.
Atlas OCAP M1056.fm Page 15 Tuesday, March 24, 2009 4:45 PM
Press CH+ once. The CBL key will blink twice.
Now, regardless of what mode you select (except AUD), the channel keys will only change channels on your cable converter.
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the Atlas OCAP 5-Device Remote Control, Global Volume Lock is set to TV, so you can control TV volume while in the VCR, DVD, TV or CBL mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. The audio modes (AUD) volume controls are NOTE: active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will have control of the audio devices volume in all other modes (i.e., VCR, DVD, TV, and CBL). This can be an advantage if, for example, you always listen to home entertainment devices through your receivers speakers. Unlocking Volume Control for a Single Device (Individual Volume Unlock) 1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., CBL) and press it once. Next, press and hold SETUP until the device key blinks twice. 2. Enter 3. The last-selected device key will blink twice.
Perform the instructions under Programming Device Control on page 10 to program device control for the desired cable converter or satellite receiver. When you are done, perform steps 5 and 6 on this page to again lock the cable ID Lock. On the remote control, press CBL once; it will blink once. Then press and hold SETUP until the CBL key blinks twice. Enter 2. The CBL key will blink twice, indicating ID Lock is again locked.
PROGRAMMING MACRO KEYS
The Atlas OCAP 5-Device Remote Control includes two macro keys (located directly below the MUTE and LAST keys). Macro keys allow you to set up key macros to activate certain keys in a specific order. For example, you can set up a key macro to change the channels on your TV, raise or lower the volume, and start recording on your VCR, all with the touch of one key. If you want to change the macros stored in a previously-programmed macro key, youll need to clear the key first (see Clearing a Macro Key on page 18).
Atlas OCAP M1056.fm Page 18 Tuesday, March 24, 2009 4:45 PM
Programming a Macro Key 1. On the remote control, press and hold SETUP until it blinks twice.
Enter 5. The SETUP key blinks twice.
Select a macro key (for example, F1) and press it once. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV followed by VOL+. You can program up to 15 key presses into one macro. Press and hold SETUP until it blinks twice.
To add another macro, repeat steps 1 through 5, substituting the new key sequence to be added in step 4. Programming more than five macros on the same macro key overwrites previous settings.
Clearing a Macro Key 1. On the remote control, press and hold SETUP until it blinks twice.
Press the macro key you want to clear once. Press and hold SETUP until it blinks twice.
This macro key is now clear and ready for reprogramming (see Programming a Macro Key on page 18). If desired, repeat these to clear another TuneIn key.
Atlas OCAP M1056.fm Page 19 Tuesday, March 24, 2009 4:45 PM
USING THE MASTER POWER KEY
The Atlas OCAP 5-Device Remote Control has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: MASTER POWER (PWR) only works in the CBL mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing MASTER POWER (PWR) once will turn the selected device on or off. Programming the Master Power Key 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 5. The last-selected device key blinks twice.
Press PWR once. For the first device you want in the power on sequence, press a device key (e.g., CBL) once. Then press PWR once. For the second device in the power sequence, press its key once (e.g, TV). Then press PWR.
5. 6. a. b.
Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired. To save the settings and exit the program: Press CBL once. Press and hold SETUP until the CBL key blinks twice.
Atlas OCAP M1056.fm Page 20 Tuesday, March 24, 2009 4:45 PM
Using the Master Power Key 1. After programming, point the remote control at the devices. Press CBL once. 2. Press PWR once to sequentially turn the programmed home entertainment devices on or off.
You will see the devices turn on or off according to the programmed sequence. Clearing the Master Power Key 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 5. The last-selected device key blinks twice.
Press and release PWR. Press and hold SETUP until the CBL key blinks twice.
RE-ASSIGNING DEVICE KEYS
The Atlas OCAP 5-Device Remote Control can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a Cable Converter, and two audio devices (for example, two audio receivers), re-assign the unused VCR key to operate the second audio device as follows: NOTE: VCR is preset at the factory to control an RCA VCR. Performing the steps below will overwrite those settings. 1. On the remote control, press VCR once; it will blink once. Then press and hold SETUP until the VCR key blinks twice. 2. Enter 2. The VCR key will blink twice.
Atlas OCAP M1056.fm Page 21 Tuesday, March 24, 2009 4:45 PM
Press AUD once, then press VCR once. The VCR key will blink twice.
The VCR key is now ready to be programmed for your second audio device. See Programming Device Control on page 10. To re-assign other device keys, repeat these and substitute the key sequence using the following chart: NOTE: Only one device can be assigned to an unused device key at a time. To Re-Assign VCR as 2nd AUD key VCR as 2nd TV key VCR as 2nd CBL key VCR back to VCR Perform Key Sequence VCR SETUP 2 AUD VCR VCR SETUP 2 TV VCR VCR SETUP 2 CBL VCR VCR SETUP 2 VCR VCR
To re-assign another unused device key, substitute it for the VCR key above and then perform the sequence. For example, to re-assign an unused AUD key as a second DVD key, perform AUD SETUP 2 DVD AUD. When a re-assignment is done, the selected device key (e.g., AUD) will blink twice to confirm your choice. At that time, you will need to program device control (see Programming Device Control on page 10).
Atlas OCAP M1056.fm Page 22 Tuesday, March 24, 2009 4:45 PM
CLEARING CUSTOM PROGRAMMING
The Atlas OCAP 5-Device Remote Control contains a Custom Programming Reset program. You can use it to remove all custom programming, except your setup codes and reassigned device keys. IMPORTANT: Executing this program will erase all custom settings for Volume Lock, Learned Keys, Tune-In Keys, and Channel Lock. However, your device programming remains. 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 0. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared.
ACTIVATING BACKLIGHTING (OPTIONAL)
On some models of your Atlas OCAP 5-Device Remote Control, you can activate backlighting. Backlighting enables your remotes keypad to remain lit for five seconds after you press any key. To enable backlighting on a remote with that feature, perform the following step: 1. Press SETUP twice within one second. Backlighting is turned on. To disable backlighting, perform the following step: 1. Press SETUP twice within one second. Backlighting is turned off.
Atlas OCAP M1056.fm Page 23 Tuesday, March 24, 2009 4:45 PM
PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA batteries (see Installing Batteries on page 9). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control. PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly. SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an infrared remote control. PROBLEM: TV/VCR Combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 11). PROBLEM: No volume on a second TV. SOLUTION: Follow instructions under Changing Volume Lock on page 15. PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter. SOLUTION: Re-program the CBL key for cable code 0476 (see Programming Device Control on page 10). PROBLEM: Tried Search Method and still could not find a working code. SOLUTION: Try the Search Method again after clearing out the device key as follows: a. Press and hold SETUP until device key blinks twice. b. Enter 2. c. Press and release the device key to be cleared twice. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.
Atlas OCAP M1056.fm Page 24 Tuesday, March 24, 2009 4:45 PM
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the users authority to operate this equipment.
This product does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Atlas OCAP 5-Device Remote Control. For help via the Internet, visit us at: www.urcsupport.com Copyright 2006 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written permission of Universal Electronics Inc. M1056F 3/09
Atlas OCAP M1056.fm Page 54 Tuesday, March 24, 2009 4:45 PM
MANUFACTURERS CODES (CODES DES MANUFACTURIERS)
Setup Codes for Audio Amplifiers Codes de configuration pour les amplificateurs audio Adcom Bose Durabrand Elan GE Harman/Kardon JVC Left Coast Lenoxx Luxman Marantz McIntosh Nakamichi NEC Optimus Parasound Philips Pioneer Polk Audio RCA Realistic Sansui Shure Sony Soundesign Victor Wards Yamaha 0577, 0892, 0395, 0264 0689, 0815, 1126 0078, 0078, 0211 0354, 0133
Setup Codes for Audio Receivers Codes de configuration pour les rcepteurs audio ADC Aiwa Akai Alco 0531 1405, 0189, 0121, 0405, 1243, 1388, 1390 www.urcsupport.com/atlasocap 54
Atlas OCAP M1056.fm Page 55 Tuesday, March 24, 2009 4:45 PM
Amphion Media Works AMW Anam Apex Digital Arcam Audiotronic Audiovox B&K BK Bose Cambridge Soundworks Capetronic Carver Classic Coby Curtis Mathes Daewoo Delphi Denon Fisher Gateway Go Video Harman/Kardon Hitachi Integra JBL JVC Kenwood KLH Koss Lasonic LG Linn Liquid Video Magnavox Marantz Mitsubishi Norcent Nova
1563, 1615 1563, 1615 1609, 1074 1257, 1430, 1189 1390, 1627 0701, 0820, 1229, 1629, 1841, 0531 1189, 1360, 0004, 0110, 0189, 0891, 1304, 0135, 1298, 1320 0110, 1306 1374, 1495, 1811, 1871 1313, 1570, 1569, 0186 1390, 1412, 1428 1366, 1497 1189, 1269, 0189, 0391, 0531, 1514 1189, 1269, 0189, 1389 1389
Atlas OCAP M1056.fm Page 56 Tuesday, March 24, 2009 4:45 PM
Onkyo Optimus Oritron Panasonic Philips Pioneer Polaroid Polk Audio Proscan RCA Rio Samsung Sansui Sanyo Sharp Sharper Image Sherwood Sirius Sonic Blue Sony
Soundesign Stereophonics Sunfire Teac Technics Thorens Toshiba Venturer Wards XM Yamaha Zenith
0135, 0842, 1298, 1320, 1531 1023, 0080, 0186, 0531, 0670, 1074 1366, 1497 1308, 1518, 0309, 0367, 1288, 1316, 1548, 1633, 1763, 1764 1189, 1269, 0189, 0391, 1120, 1266 1023, 0014, 0080, 0150, 0244, 0531, 0630, 0189, 1289, 1023, 1609, 1254, 0080, 0531, 1074, 1390, 1295, 1251, 1469, 1801 0186, 1077, 1517, 1653 1627, 1811, 1987 1532, 1869 1058, 1441, 1258, 1759, 1622, 0474, 1349, 1406, 1442, 1558, 1658, 1758, 1074, 1390, 1528 1308, 1518, 0189, 0014, 0080 1406, 1414 0176, 0186, 1176, 1276, 1331, 1375 0857, 1293
Atlas OCAP M1056.fm Page 57 Tuesday, March 24, 2009 4:45 PM
Setup Codes for Audio Accessories Codes de configuration pour accessoires audio Accurian Altec Lansing Apple Cambridge Soundworks Creative D-Link DLO Integra iPort Marantz Motorola NaviPod Netgear Omnifi Onkyo Roku Sonance SSI Yamaha 1106 0607, 1056, 1485 1115, 1809, 1810
Setup Codes for Cable Boxes/Converters Codes de configuration pour les dcodeurs ABC Americast Amino Bell & Howell Bell South Clearmaster ClearMax Coolmax Digeo Digi Director Dumont General Instrument GoldStar Hamlin i3 Micro 0003, 0008, 0014, 1602, 0476, 0810, 0276, 0009, 0273 1602
0002, 0479, 0637, 1278 0002, 0294, 0479, 0593, 1278, 0240, 0807, 1035, 0593, 1278 0000, 0593, 0162, 0454, 1037, 1162, 1237, 0807 0162, 0454, 0593, 1162, 1262 0002, 0479, 1479 0162, 1035, 1162, 1262 0240, 1035, 1237 0162, 1035, 1162 0000, 1037 0240, 0807, 1035, 0000, 0479, 0000, 1237 0000, 0000, 0593 0000
Atlas OCAP M1056.fm Page 81 Tuesday, March 24, 2009 4:45 PM
Toshiba White Westinghouse Zenith
0845, 0000, 0479, 0637, 1479
Setup Codes for TV/VCR/DVD Combos Codes de configuration pour combins TV / magntoscope / DVD
Akai Broksonic Diamond Vision Emerson ESA Magnavox Panasonic Polaroid RCA Sylvania Symphonic Toshiba
1946, 1944 1945
Akai Broksonic Diamond Vision Emerson ESA Funai Magnavox Panasonic Polaroid RCA Sharp Superscan Sylvania Symphonic Toshiba
Controlled by the VCR
0821 1362, 0821 1045
Contrl par le magntoscope
Atlas OCAP M1056.fm Page 82 Tuesday, March 24, 2009 4:45 PM
Setup Codes for VCRs Codes de configuration pour magntoscopes ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo Daytron Dell Denon DirecTV Durabrand Dynatech 1972 0048, 0278 0037, 0000, 0124, 0307, 0468 0041, 0049, 0053, 0061, 0106, 0240 0037, 0104 0184, 0121, 0209, 0002, 0211, 0295, 0361, 0479, 1479, 0035, 0081 0072, 0278 0037, 0278, 0037, 0047, 0240, 0072, 0271 0060, 0035, 0162, 0041, 0760, 1035 0240, 0045, 0278, 0020, 0561, 0637, 0739 0039, 0038 0000
Atlas OCAP M1056.fm Page 83 Tuesday, March 24, 2009 4:45 PM
Electrohome Electrophonic Emerex Emerson
0032 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 1479, 1278, 0637, 1593, 0593, 0561, 0510, 0479, 0361, 0295, 0294, 0212, 0211, 0208, 0088, 0068, 0061, 0036 Fisher 0047, 0104, 0054, 0066 Fuji 0035, 0033 Funai 0000, 0593, 1593 Garrard 0000 Gateway 1972 GE 0060, 0035, 0240, 0065, 0202, 0760, 0761, 0807, 1035, 1060 Go Video 0232, 0279, 0432, 0526, 0643 GoldStar 0037, 0038, 0018, 1237 Gradiente 0000, 0408 Grundig 0195 Harley Davidson 0000 Harman/Kardon 0081, 0038, 0075 Harwood 0072, 0068 Headquarter 0046 Hewlett Packard 1972 HI-Q 0047 Hitachi 0000, 0042, 0041, 0065, 0082, 0089, 0105, 0166 Howard Computers 1972 HP 1972 Hughes Network Systems 0042, 0739 Humax 0739 Hush 1972 iBUYPOWER 1972 Jensen 0041 JVC 0067, 0041, 0008, 0206, 0207, 0384, 1707 KEC 0037, 0278 Keen 0693 Kenwood 0067, 0041, 0038, 0384 www.urcsupport.com/atlasocap 83
Atlas OCAP M1056.fm Page 87 Tuesday, March 24, 2009 4:45 PM
Vector Vector Research Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards
White Westinghouse XR-1000 Yamaha Zenith ZT Group
0045 0038, 0040 0045, 0040, 0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042, 0072, 0149, 0062, 0212, 0760 0209, 0072, 0637 0035, 0000, 0039, 0033, 0000, 0209, 0034, 0479, 0637, 1139, 1479 1972
Atlas OCAP M1056.fm Page 88 Tuesday, March 24, 2009 4:45 PM
Dect5251S Olympus EP-2 GR-DVX707a-gr-dvx707 ZWG3162 PAC C110 300 AE Review Minolta 7150 Pt-ae900 GR-T382SV 3340Z GT-S3500 I Remote Care SD 50 Roland A-80 BX305FW VLT2090 Vantage WII VGN-AR71M Clock 970CSE SR1200 Studio LC Deluxe Fbii XL-4 ZDF314 SJ51-B-046D 920NW NP-R45 VSA-AX10 DA 3160 Server TL553C CS-A95KE 37LE2R Blend DC301 DCR-HC36E Conquest KVT-815DVD PT-1100 VSX-D414-K SMC2862W-G P4VP-MX CP790 LX8000SA-21S CE-29Q40RQ Beocom 4 KX-TG5651 KOR-816TOA EM200 LV-104U LE37A656a1F G31M-GS Fragfxv 2 FX 5200 DCR-SR220 S3650 F99000P CD840 P5916 MRD-M605 Digimaxa400 Pathfinder-2005 SC-PM08 IC-M88 Mustang-1996 64840 TCS673T Ep1030F LC-15B4E Altima-1996 Ultra66 E3230 Rrus571 47PFL9732D Companion Butcher BAY R-8R51 SD205 PR 25 UXA450 TLP X20 CXT 980 KV-SZ29m91K RX-5042S 4 2 4X4-2001 P4B533-E LPC-LM530A DI1611 Felcom 70 System-2004 Optima Aurora 1999 Designjet 4000 PS42B450b1D DEH-3100UB Zoom B2 Acoustic 700 8 0
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101