Millennium 4 Mnl M4090

7/23/99 9:34 AM

Page 1

MILLENNIUM 4

Universal Remote Control

Users Guide

Page 2

TABLE OF CONTENTS

Introduction. 3 Features And Functions. 4

Key Charts. 5

Installing Batteries. 7 Programming TV Control. 8

Setup Codes for TVs. 8

Programming VCR Control. 12

Setup Codes for VCRs. 12

Programming TV/VCR Combo Control. 16
Setup Codes for TV/VCRs. 17
Programming Cable Converter (or DBS Receiver) Control. 18
To Unlock the Cable Key. 18 To Program the Cable Key. 18 To Lock the Cable Key. 19 Setup Codes for Cable Converters. 19 Setup Codes for DBS Receivers. 20 Programming Channel Control Lock. 21 To Activate Channel Control Lock. 21 To De-Activate Channel Control Lock. 21 Programming Audio Control. 22 Setup Codes for CD Players. 23 Setup Codes for DVD Players. 24 Setup Codes for Stereo Receivers. 24 Setup Codes for Stereo Amplifiers. 25 Setup Codes for DBS Audio Services. 25 Searching For Your Code. 26 Checking The Codes. 27 Programming The Power Key. 28 Programming The Tune-In Keys. 29 To Program a Tune-In Key. 29 To Clear a Tune-In Key. 29 Re-Assigning Device Keys. 30 Changing Volume Lock. 31 To Change Volume Lock to the CABLE Mode. 31 To Change Volume Lock to the TV Mode. 31 To Change Volume Lock to the VCR Mode. 31 To Change Volume Lock to the AUDIO Mode. 32 Troubleshooting. 33 Additional Information. 34

Page 3

INTRODUCTION
The Universal Electronics Millennium 4 is our latest generation universal remote control. It is designed with sophisticated technology that will allow you to finally consolidate the clutter of all of the original remote controls in your home entertainment system. Its packed with easyto-use features such as: Preprogrammed to operate the cable converter supplied by your cable system provider Preprogrammed technology for easy setup Preprogrammable Power key for master on/off control of all of your equipment with a single keystroke Instant Tune-In keys for assignment to your favorite channels Convenient hide-away sliding door to conceal less-used functions Color-coded keys to quickly locate popular functions Cable ID Lock to lock your remote control for use only with the cable converter Channel Lock to lock channel selection only to the cable converter Code library for video and audio components Code Search to help program control of older or discontinued components Before you can use your new remote control, you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your Millennium 4 and enjoy your new remote control.

Page 4

FEATURES AND FUNCTIONS
Use the illustration below to locate Millennium 4 features and then study the Key Charts (on the next two pages) to learn how they function.

Page 5

Key Charts
The LED (red light) blinks to show that the remote control is working and is sending signals. Press AUDIO, VCR, TV, or CBL once to select a home entertainment component to control. Press POWER once to turn on or off the selected home entertainment component. Use SETUP for all programming sequences. Use the keypad (0 ~ 9) to directly select channels (e.g., 09 or 31).
Press MUTE once to turn sound off or on. Press ENTER once after entering channel numbers on some TV models. Use volume + (or volume -) to raise (or lower) the sound volume.
Use CH + (or CH -) to select the next higher (or lower) channel.
Press LAST once to recall the last channel and to page back one screen in the main menu. Use FAV to cycle through your favorite channels that are stored in your cable converter. Use GUIDE to display the program guide. Press PPV/LOCK once to display the pay per view menu or to lock out a specific channel on your cable converter. Use EXIT to exit out of your cable converters menu and guide.

continued on next page.

Page 6

Key Charts (continued)

Use cursor keys to move the cursor in the program guide and menu screens. Use SELECT/OK to choose options, PPV events, and to tune programs from the program guide. Use INFO to display current channel and program information. Press MENU once to display your cable converters screen menu. Use PAGE v (or PAGE w) to page up or down) through menu screens and the program guide. Reserved for use as Tune-In keys (see page 29). Slide the door open to reveal less-often used keys such as VCR transport buttons and cable converter features. In the VCR and TV modes, use the REW, PLAY, FF, REC, STOP, and PAUSE keys to control your VCR. To record a program, press REC twice. Reserved for cable converter features (see your cable converter manual). Press TV/VCR once to switch the VCR to view TV channels or tape. This key will also control the input select feature on most TVs.

Page 7

INSTALLING BATTERIES
1. 2. On the back of the Millennium 4, push the tab and lift off the battery cover. Obtain two (2) fully-charged AA alkaline batteries. Match the + and marks on the batteries to the + and marks in the battery case, then insert the new batteries. Press the battery cover back into place. The tab should click when the cover is locked. Test the unit by pressing POWER and any mode key (e.g. AUDIO, VCR, TV, or CBL). If the batteries are inserted correctly, the LED will blink once.
NOTE: Whenever batteries need replacement, the Millennium 4 will blink twice with every key press. Simply replace the batteries and the Millennium 4 will be restored to its full functionality, complete with your favorite settings.

Page 8

PROGRAMMING TV CONTROL
NOTE: If you own a TV/VCR combination, skip this section and perform Programming TV/VCR Combo Control on page 16.
Locate the brand name of your TV in the Setup Codes For TVs section below, and write it in the following space. TV Brand: __________________________________ The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the Millennium 4 to operate your TV: 1. 2. Turn on the TV. On the Millennium 4, press TV once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter the first four-digit code for your TV. If you perform this procedure correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering the codes last digit, then repeat steps 2 through 3 and try entering the same code again.
Aim the Millennium 4 at your TV and press POWER once. The TV should turn off. If it does not respond, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 26). Write your TV code in the boxes below for future reference.

NOTE: Remember, to use the Millennium 4 to operate your TV, press TV first.

Setup Codes for TVs:

A-Mark AOC Abex Admiral Adventura Aiko Akai Alaron Ambassador 0003 0030, 0019, 0003, 0052, 0179 0177

Page 9

Anam Anam National Archer Audiovox Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic CXC Candle Carnivale Carver Celebrity Cineral Citizen Clairtone Concerto Contec Craig Crosley Crown Curtis Mathes
0003 0451, 0180, 0003, 0092, 0019 0154, 0019 0236, 0463, 0030, 0056, 0046, 0451, 0092 0060, 0030, 0056, 0039, 0046, 0092, 0186, 0056 0180, 0054 0180, 0039 0047, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0145, 0056, 0016, 0039, 0166, 0466 Daewoo 0451, 0019, 0039, 0092, 0623, 0624 Daytron 0019 Denon 0145 Dumont 0017, 0019 Dwin 0720, 0774 Electroband 0000, 0185 Emerson 0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179, 0039, 0038, 0177, 0185, 0280, 0623, 0624 Envision 0030 Fisher 0154, 0159 Fujitsu 0179 Funai 0180, 0179, 0171 Futuretech 0180 GE 0047, 0051, 0451, 0093, 0282, 0178, 0021, 0055, 0027, 0135 Gibralter 0017, 0030, 0019 GoldStar 0030, 0178, 0019, 0056, 0001, 0032 Gradiente 0053, 0056 Grunpy 0180, 0179 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Hitachi 0145, 0056, 0032, 0038, 0151 Infinity 0054 Inteq 0017 JBL 0054 JCB 0000 continued on next page.

Page 10

Setup Codes for TVs (continued):
JVC Janeil KEC KTV Kaypani Kenwood Kloss LG LXI Logik Luxman MEI MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Noshi Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RCA Radio Shack Realistic 0180 0180, 0030, 0039, 0185, 0030, 0019 0024, 0047, 0054, 0154, 0156, 0150, 0030, 0178, 0019 0060, 0030, 0019, 0056, 0185 0054, 0030, 0179, 0020, 0024, 0096, 0186, 0187, 0054, 0178, 0145, 0003 0154, 0250, 0150, 0178, 0056, 0016 0047, 0017, 0051, 0039, 0032, 0093, 0150, 0178, 0019 0093, 0156, 0178, 0166 0030, 0019, 0056, 0030, 0178, 0180 0154, 0250, 0166 0093, 0165 0236, 0463, 0179 0051, 0250, 0055 0047, 0156, 0051, 0060, 0030, 0178, 0021, 0019, 0018, 0056, 0039, 0003, 0027, 0032, 0135 0054, 0463, 0030, 0145, 0019, 0020, 0030, 0019, 0039 0038, 0166 0019, 0039, 0047 0178, 0003, 0052, 0466 0017, 0019 0051, 0250, 0165, 0055 0047, 0051, 0093, 0019, 0018, 0038, 0090, 0135 0047, 0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039, 0032 0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039, 0032

Page 11

Rhapsody Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Shogun Signature Simpson Sony Soundesign Spectricon Squareview Starlite Supre-Macy Supreme Sylvania Symphonic TMK Tandy Tatung Technics Technol Ace Techwood Teknika
0185 0017, 0030, 0497 0180, 0019 0030, 0039, 0032, 0052 0060, 0030, 0178, 0019, 0056, 0154, 0146, 0178 0236, 0180, 0178, 0019, 0179 0047, 0054, 0154, 0156, 0178, 0179, 0056, 0146, 0159, 0156 0093, 0165, 0039, 0016 0186, 0187 0000, 0080 0180, 0178, 0179, 0054, 0030, 0020, 0178, 0056, 0055, 0003 0051, 0051, 0056, 0003 0054, 0180, 0150, 0060, 0019, 0179, 0056, 0016, 0039, 0092, 0186 Telefunken 0056 Toshiba 0154, 0156, 0060 Tosonic 0185 Totevision 0039 Universal 0027 Vector Research 0030 Victor 0053 Vidikron 0054 Vidtech 0178, 0019 Viking 0046 Wards 0054, 0165, 0030, 0178, 0021, 0019, 0179, 0056, 0016, 0020, 0027, 0080, 0096 White Westinghouse 0623, 0624 Yamaha 0030, 0019 Zenith 0017, 0016, 0092 Zonda 0003

Page 12

PROGRAMMING VCR CONTROL
Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: __________________________________ The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the Millennium 4 to operate your VCR: 1. 2. Turn on your VCR and insert a video cassette. On the Millennium 4, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter the first four-digit code for your VCR. If you perform this procedure correctly, the LED will blink twice.
Aim the Millennium 4 at your VCR and press POWER once. The VCR should turn off. If your VCR remote control does not have a POWER key, press PLAY. If the VCR does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If the VCR still does not work , try searching for the code (see Searching For Your Code on page 26). Write your VCR code in the boxes below for future reference.
NOTE: Remember, to use the Millennium 4 to operate your VCR, press VCR first.

Setup Codes for VCRs:

Admiral Adventura Aiko Aiwa Akai American High Asha 0278 0037, 0000, 0307 0041, 0061, 0240

Page 13

Audiovox Beaumark Bell & Howell Broksonic CCE Calix Canon Capehart Carver Cineral Citizen Colt Craig Curtis Mathes Cybernex Daewoo Daytron Denon Dynatech Electrohome Electrophonic Emerex Emerson
0104 0184, 0121, 0209, 0002, 0479 0072, 0037, 0037, 0047, 0240, 0072, 0271 0060, 0035, 0041, 0045, 0278, 0020, 0032 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0061, 0208, 0212, 0479, 0561 Fisher 0047, 0104, 0054, 0066 Fuji 0035, 0033 Funai 0000 GE 0060, 0035, 0048, 0240, 0202 Garrard 0000 Go Video 0526 GoldStar 0037, 0038 Gradiente 0000, 0008 HI-Q 0047 Harley Davidson 0000 Harman/Kardon 0081, 0038 Harwood 0072 Headquarter 0046 Hitachi 0000, 0042, 0041, 0105 JVC 0067, 0041, 0008 Jensen 0041 KEC 0037, 0278 KLH 0072 Kenwood 0067, 0041, 0038 Kodak 0035, 0037 LXI 0037 Lloyds 0000, 0208 Logik 0072 MEI 0035 MGA 0240, 0043, 0061 MGN Technology 0240 MTC 0240, 0000 Magnasonic 0278 continued on next page.

Page 14

Setup Codes for VCRs (continued):
Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NEC Nikko Nikon Noblex Olympus Optimus Optonica Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Portland Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA Radio Shack Radix Randex Realistic Ricoh Runco STS Samsung Sanky Sansui Sanyo Scott Sears Semp Sharp 0035, 0039, 0081, 0000, 0035, 0035, 0162 0035, 0037, 0048, 0039, 0047, 0240, 0000, 0104, 0162, 0046, 0307 0042, 0105 0048, 0067, 0043, 0061 0035, 0048 0000, 0072 0104, 0067, 0041, 0035 0037, 0048, 0104, 0184, 0002, 0479 0035, 0162, 0077, 0225 0035, 0037, 0240, 0042, 0038, 0054 0042, 0105 0035, 0209, 0479 0035, 0081, 0240 0060, 0046 0035, 0162, 0077 0060, 0035, 0048, 0240, 0042, 0149, 0077, 0105, 0106, 0035, 0037, 0048, 0047, 0000, 0104, 0062, 0046, 0240, 0045 0048, 0039 0000, 0067, 0041, 0271, 0479 0047, 0240, 0104, 0046 0184, 0045, 0121, 0043, 0212 0035, 0037, 0047, 0000, 0042, 0104, 0046, 0054, 0066, 0048, 0062

Page 15

Shintom Shogun Singer Sony Sylvania Symphonic TMK Tatung Teac Technics Teknika Thomas Toshiba Totevision Unitech Vector Vector Research Video Concepts Videosonic Wards

Page 18

PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL
The Millennium 4 is preprogrammed at the factory to operate the cable converter given to you by your cable company. However, if you have another brand or model of cable converter or satellite receiver that you would like to control, then youll need to perform the following instructions to unlock the cable key, enter in a new code, and lock the cable key again.

To unlock the Cable key:

1. 2. Turn on the Cable Converter or DBS Receiver. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 7. The LED will blink twice. Press CH once. The LED will blink twice.
To program the Cable key:
1. Locate the brand name of your Cable Converter (or Direct Broadcast Satellite Receiver) in the Setup Codes For Cable Converters (or Setup Codes For DBS Receivers) section starting on the next page, and write it in the appropriate space. Cable Converter Brand: ________________ or DBS Receiver Brand: __________________ The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to reprogram the Millennium 4 to operate your Cable Converter or DBS Receiver. 2. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter the first four-digit code for your Cable Converter or DBS Receiver. If you perform this procedure correctly, the LED will blink twice.

Page 19

Aim the Millennium 4 at your Cable Converter or DBS Receiver and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work , try searching for the code (see Searching For Your Code on page 26). Write your Cable Converter or DBS Receiver code in the boxes below for future reference.
NOTE: Remember, to use the Millennium 4 to operate your Cable Converter or DBS Receiver, press CABLE first.

To lock the Cable key:

1. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 7. The LED will blink twice. Press CH + once. The LED will blink twice.
Setup Codes for Cable Converters:
ABC ABC Cable Americast Contec General Instrument GoldStar Hamlin Jerrold Macom Memorex Movie Time NSC Oak Optimus Panasonic Paragon Pioneer Pulsar Quasar RCA Regal Runco 0003, 0008, 0017, 0476, 0276, 0020, 0259 0003, 0012, 0476, 0276, 0021 0000, 0107, 0144, 0020, continued on next page.

Page 20

Setup Codes for Cable Converters (continued):
Samsung Scientific Atlanta Sprucer Starcom TV86 Tocom Toshiba Viewstar Zenith 0144 0008, 0477, 0017, 0277, 0774, 0012, 0063 0000, 0525, 0899
Setup Codes for DBS Receivers:
AlphaStar Echostar Expressvu General Instrument HTS Hitachi Hughes JVC Jerrold Magnavox Memorex Next Level Panasonic Philips Primestar RCA Sony Star Choice Toshiba Uniden Zenith 0775 0627, 0361, 0775 0627, 0361 0724, 0724, 0722 0627, 0790 0724, 0722 0856

Page 21

PROGRAMMING CHANNEL CONTROL LOCK
By activating this feature, the Millennium 4 will only allow access to the channel control capabilities of your cable converter. This will guarantee that you do not inadvertently change the channel on your TV or VCR.
To Activate Channel Control Lock:
1. 2. 3. 4. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 6. The LED will blink twice. Press CH + once. The LED will blink twice. Now, regardless of what mode you select (i.e., TV, VCR, or CBL), only the channel control capability of your cable converter will be accessible.
NOTE: This feature does not affect the Audio mode.
To De-Activate Channel Control Lock:
1. 2. 3. 4. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 6. The LED will blink twice. Press CH once. The LED will blink twice. The Millennium 4 will again provide TV and VCR channel control capabilities while in the TV or VCR mode.

Page 22

PROGRAMMING AUDIO CONTROL
Using the Millennium 4s Audio mode, you can also control an audio component, such as CD or DVD player, a stereo receiver, a stereo amplifier, or a DBS audio service. Locate the brand name of your audio component in the one of accompanying code lists (starting on the next page).Write it in the appropriate space. CD Player Brand: ____________________________ or DVD Player Brand: ____________________________ or Stereo Receiver Brand: __________________________ or Stereo Amplifier Brand: ________________________ or DBS Audio Brand: ____________________________ The brands are listed in alphabetical order with popular codes listed first.You will use one of these codes to program the Millennium 4 to operate your audio component: 1. 2. Turn on the audio component (or DBS receiver to control its audio service). On the Millennium 4, press AUDIO once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter the first four-digit code for your audio component. If you perform this procedure correctly, the LED will blink twice.

NOTE: In the search mode, the Millennium 4 will send IR codes from its library to the selected component, starting with the most popular code first.
Press SETUP once to lock in the code. To search for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., VCR, CBL, or AUDIO) for the (VCR, Cable, or Audio) component you are searching for.

Page 27

CHECKING THE CODES
If you have set up the Millennium 4 using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1. 2. 3. 4. Turn on your TV. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 0. The LED will blink twice. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of LED blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box below.
NOTE: If a code digit is 0, the LED will not blink.
Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes below. To check for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., VCR, CBL, or AUDIO) for the (VCR, Cable, or Audio) component you are checking.Write down the codes in the appropriate boxes below. TV Code

VCR Code

CABLE Code
AUDIO ___________________ Code

Page 28

PROGRAMMING THE POWER KEY FOR ALL ON/OFF (CABLE MODE ONLY)
With the Millennium 4, you can program the POWER key to turn all of your equipment on and off with the press of one button in the Cable mode. In other modes, individual power control is retained, so you can still power on or off your TV,VCR, or audio component independently. 1. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 5. The LED will blink twice. Press POWER once. Enter the following sequence*: a. Press CBL once, then POWER once. b. Press TV once, then POWER once. c. Press VCR once, then POWER once. d. Press AUDIO once, then POWER once. e. Finally, press CBL once. 5. 6. Press and hold SETUP until the LED blinks twice, then release SETUP. Now, when you press CBL once and then press POWER once, the Millennium 4 will direct power to your cable converter, TV,VCR, and audio component and leave the remote control in the Cable mode.

2. 3. 4.

* NOTE: If you do not want all of your equipment to power up all of the time, you can shorten step 4 to include only those devices you want to turn on or off. For example, to just power up your TV and Cable Converter, enter the following sequence for step 4: a. Press CABLE once, then POWER once. b. Press TV once, then POWER once. c. Finally, press CABLE once. Now when you press CABLE once and then press POWER once, the Millennium 4 will only direct power to your Cable converter and TV, and still leave the remote control in the Cable mode.

Page 29

PROGRAMMING THE TUNE-IN KEYS FOR SPECIFIC CHANNELS
The Millennium 4 includes three Tune-In keys (located directly below the PAGE keys). Each can be programmed to remember three of your favorite channel settings for a total of nine channels. If you want to change the channels in a previously-programmed Tune-In key, youll need to clear the key first (see below).
To program a Tune-In key:
1. 2. 3. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 5. The LED will blink twice. Then select a Tune-In key and press it once. Press CBL once followed by the channel number to be programmed (e.g., 3 - 9).
NOTE: If you are programming a channel for a Digital Cable Converter, you need to enter all channels in a 3-digit channel format. For example, if the desired channel is 39, then enter it as 0 - 3 - 9.
Press and hold SETUP until the LED blinks twice, then release SETUP. To add another channel, repeat steps 1-4 substituting the new channel to be added in step 3.
NOTE: Programming more than three channels onto the same Tune-Inkey will overwrite previous settings.

To clear a Tune-In key:

1. 2. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 5. The LED will blink twice. Then select a Tune-In key you want cleared and press it once. Press and hold SETUP until the LED blinks twice, then release SETUP. This Tune-In key is now clear and ready for reprogramming (see above Programming The Tune-In Keys For Specific Channels). If desired, repeat steps 1 though 4 to clear another Tune-In key. 29

Page 30

RE-ASSIGNING DEVICE KEYS
The Millennium 4 can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Millennium 4 control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUDIO key to operate the second VCR as follows: 1. 2. 3. 4. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 2. The LED will blink twice. Press VCR once, then press AUDIO once. The AUDIO key is now ready to be programmed for your second VCR. See Programming VCR Control on page 12.
To re-assign other device keys, repeat steps 1 through 4 by substituting the key sequence from the following chart for a desired component: To Re-Assign TV as 2nd VCR key: TV as 2nd Audio key: TV as 2nd Cable key: TV back to TV: VCR as 2nd TV key: Perform Key Sequence SETUP - 9 - 9 - 2 - VCR - TV SETUP - 9 - 9 - 2 - AUDIO - TV SETUP - 9 - 9 - 2 - CBL - TV SETUP - 9 - 9 - 2 - TV - TV SETUP - 9 - 9 - 2 - TV - VCR

VCR as 2nd Audio key: SETUP - 9 - 9 - 2 - AUDIO - VCR VCR as 2nd Cable key: SETUP - 9 - 9 - 2 - CBL - VCR VCR back to VCR: SETUP - 9 - 9 - 2 - VCR - VCR
AUDIO as 2nd TV key: SETUP - 9 - 9 - 2 - TV - AUDIO AUDIO as 2nd VCR key: SETUP - 9 - 9 - 2 - VCR - AUDIO AUDIO as 2nd Cable key: SETUP - 9 - 9 - 2 - CBL - AUDIO AUDIO back to AUDIO: SETUP - 9 - 9 - 2 - AUDIO - AUDIO Upon completion of a re-assignment, the LED will blink twice to confirm your selection.At that time, you will also need to program the Millennium 4 to control the new component (see previous sections on Programming TV Control, Programming VCR Control, Programming Cable Control, or Programming Audio Control). 30

Page 31

CHANGING VOLUME LOCK
The Millennium 4 is set to control volume of a component through your TV while in the TV,VCR, or Cable mode. However, in the Audio mode, you have separate control of of your audio components volume. If your TV is not remote controllable, or if you would like the volume to be controlled by a different component, you can change the Volume Lock setting to control a volume through a non-associated mode (e.g., through the cable in the TV mode).
To change Volume Lock to the CABLE mode:
1. 2. 3. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 3 and then press CBL once. The LED will blink twice. Now, whenever you press Volume +,Volume , or MUTE on the Millennium 4, volume will be controlled by your Cable Converter.
To change Volume Lock to the TV mode:
1. 2. 3. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 3 and then press TV once. The LED will blink twice. Now, whenever you press Volume +,Volume , or MUTE on the Millennium 4, volume will be controlled by your TV.
To change Volume Lock to the VCR mode:
1. 2. 3. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 3 and then press VCR once. The LED will blink twice. Now, whenever you press Volume +,Volume , or MUTE on the Millennium 4, volume will be controlled by your VCR.

Page 32

CHANGING VOLUME LOCK (CONTINUED)
To change Volume Lock to the AUDIO mode:
NOTE: Performing these steps will allow you to access the volume control of your audio component in all modes.

1. 2. 3.

On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. Enter 9 - 9 - 3 and then press AUDIO once. The LED will blink twice. Now, whenever you press Volume +,Volume , or MUTE on the Millennium 4, volume will be controlled by your audio component.

Page 33

TROUBLESHOOTING
PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: LED blinks when you press a key, but home entertainment component does not respond.
SOLUTION: Make sure you are aiming the Millennium 4 at your home entertainment component and that you are within 15 feet of the component you are trying to control. PROBLEM: The Millennium 4 does not control home entertainment components or commands are not performing properly.
SOLUTION: Try all listed codes for the component brand being set up. Make sure all components can be operated with an infrared remote control. PROBLEM: TV/VCR combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 16). PROBLEM: No volume on a second TV. SOLUTION: Follow instructions in Changing Volume Lock (see page 31). PROBLEM: CH+ , CH , and LAST do not work for your RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the original remote control will operate these functions. PROBLEM: Changing channels does not work properly. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the Millennium 4 after entering a channel number. PROBLEM: Tried Search Method and still could not find a working code.
SOLUTION: Try the Search Method again after clearing out the device key as follows: Press and hold ENTER until red light blinks twice, then release. Next enter 9 - 9 - 2. Then press and release the device key to be cleared twice. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes on the Millenium 4. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.

Page 34

ADDITIONAL INFORMATION
The Millennium 4 does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Millennium 4. For help via the Internet, visit us at: cable.rcinfo.com (do not type in http:// or www before the address) For help via e-mail, contact us at: CableHelp@ueic.com

Copyright 1999 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. M4/99

MILLENNIUM 4

Universal Remote Control Users Guide

TABLE OF CONTENTS

Introduction. 2 Features and Functions. 3 Key Charts. 3 Installing Batteries. 4 Programming TV Control. 4 Setup Codes for TVs. 5 Programming VCR/DVD Player Control. 6 Setup Codes for VCRs. 7 Setup Codes for DVD Players. 7 Programming TV/VCR Combo Control. 8 Setup Codes for TV/VCRs.8 Programming Cable Converter (or DBS Receiver) Control. 9 To Unlock the CBL Key.9 To Program the CBL Key. 9 To Lock the CBL Key. 9 Setup Codes for Cable Converters. 10 Setup Codes for DBS Receivers. 10 Programming Channel Control Lock. 10 To Activate Channel Control Lock. 10 To De-Activate Channel Control Lock. 10 Programming Audio Control. 11 Setup Codes for Audio Amplifiers.11 Setup Codes for Audio Receivers.11 Searching For Your Code. 12 Checking The Codes. 12 Programming The Tune-In Keys.13 To Program a Tune-In Key. 13 To Clear a Tune-In Key. 13 Re-Assigning Device Keys. 14 Changing Volume Lock. 14 To Change Volume Lock to the Cable Mode. 14 To Change Volume Lock to the TV Mode.14 To Change Volume Lock to the VCR Mode. 14 To Change Volume Lock to the Audio Mode. 14 Troubleshooting. 15 Additional Information. 15

Page 1 of 15

INTRODUCTION
The Universal Electronics Millennium 4 is our latest generation universal remote control. It is designed with sophisticated technology that will allow you to finally consolidate the clutter of all of the original remote controls in your home entertainment system. Its packed with easy-to-use features such as: Preprogrammed to operate the cable converter supplied by your cable system provider Preprogrammed technology for easy setup Instant Tune-In keys for assignment to your favorite channels Convenient hide-away sliding door to conceal less-used functions Color-coded keys to quickly locate popular functions Cable ID Lock to lock your remote control for use only with the cable converter Channel Lock to lock channel selection only to the cable converter Code library for video and audio components Code Search to help program control of older or discontinued components Before you can use your new remote control, you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your Millennium 4 and enjoy your new remote control.

Page 2 of 15

FEATURES AND FUNCTIONS
Use the illustration below to locate Millennium 4 features and then study the Key Charts to learn how they function.

Key Charts

____________________________________________
Reserved for use as Tune-In keys

Page 3 of 15

INSTALLING BATTERIES
1. On the back of the Millennium 4, push the tab and lift off the battery cover. 2. Obtain two (2) fully-charged AA alkaline batteries. Match the + and marks on the batteries to the + and marks in the battery case, then insert the new batteries. 3. Press the battery cover back into place. The tab should click when the cover is locked. 4. Test the unit by pressing POWER and any mode key (e.g. AUDIO,VCR, TV, or CBL). If the batteries are inserted correctly, the LED will blink once.
NOTE: Whenever batteries need replacement, the Millennium 4 will blink twice with every key press. Simply replace the batteries and the Millennium 4 will be restored to its full functionality, complete with your favorite settings.

PROGRAMMING TV CONTROL

NOTE: If you own a TV/VCR combination, skip this section and perform Programming TV/VCR Combo Control on page 8.
Locate the brand name of your TV in the Setup Codes for TVs in the next section, and write it in the space below. TV Brand: __________________________________ The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Millennium 4 to operate your TV: 1. Turn on the TV. 2. On the Millennium 4, press TV once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your TV. If you perform this procedure correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering the codes last digit, then repeat steps 2 through 3 and try entering the same code again.
4. Aim the Millennium 4 at your TV and press POWER once. The TV should turn off. If it does not respond, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 12). 5. Write your TV code in the boxes below for future reference.

NOTE: Remember, to use the Millennium 4 to operate your TV, press TV first.

Page 4 of 15

SETUP CODES FOR TVs:
AOC 0030, 0019 Admiral 0093, 0463 Aiko 0092 Akai 0030 Alaron 0179 America Action 0180 Anam 0180 Audiovox 0451, 0180, 0623, 0092 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 Candle 0030, 0056 Carnivale 0030 Carver 0054 Celebrity 0000 Cineral 0451, 0092 Citizen 0060, 0030, 0056, 0092, 0280 Concerto 0056 Contec 0180 Craig 0180 Crosley 0054 Crown 0180 Curtis Mathes 0047, 0747, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0056, 0145, 0016, 0166 Daewoo 0451, 0019, 0623, 0624, 0092 Daytron 0019 Denon 0145 Dumont 0017, 0019 Electroband 0000 Emerson 0154, 0236, 0463, 0180, 0178, 0179, 0019, 0623, 0624, 0282, 0280 Envision 0030 Fisher 0154 Fujitsu 0179, 0683 Funai 0180, 0179, 0171 Futuretech 0180 GE 0047, 0747, 0051, 0451, 0093, 0178, 0021, 0282 Gibralter 0017, 0030, 0019 GoldStar 0030, 0178, 0056, 0019 Gradiente 0053, 0056 Grunpy 0180, 0179 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Hitachi 0056, 0145, 0016 Infinity 0054 Inteq 0017 JBL 0054 JCB 0000 JVC 0053 KEC 0180 KTV 0180, 0030, 0280 Kenwood 0030, 0019 Konka 0707, 0628, 0632, 0638, 0703 LG 0056 LXI 0047, 0747, 0054, 0154, 0156, 0178 Logik 0016 Luxman 0056 MGA 0150, 0030, 0178, 0019 MTC 0060, 0030, 0056, 0019 Magnavox 0054, 0030, 0179 Majestic 0016 Marantz 0054, 0030 Matsushita 0250 Megatron 0178, 0145 Memorex 0154, 0250, 0463, 0150, 0178, 0179, 0056, 0016 Midland 0047, 0747, 0017, 0051 Minutz 0021 Mitsubishi 0093, 0150, 0178, 0019 Motorola 0093 Multitech 0180 NAD 0156, 0178, 0166 NEC 0030, 0056, 0019 NTC 0092 Nikko 0030, 0178, 0092 Onwa 0180 Optimus 0154, 0250, 0166 Optonica 0093, 0165 Orion 0236, 0463, 0179 Panasonic 0051, 0250 Penney 0047, 0747, 0156, 0051, 0060, 0030, 0178, 0021, 0056, 0019 Philco 0054, 0463, 0030, 0145, 0019 Philips 0054 Pilot 0030, 0019 Pioneer 0166 Portland 0019, 0092 Prism 0051 Proscan 0047, 0747 Proton 0178 Pulsar 0017, 0019 Quasar 0051, 0250, 0165 RCA 0047, 0747, 0090, 0051, 0093, 0019, 0278 RadioShack 0047, 0747, 0154, 0180, 0030, 0178, 0056, 0019, 0165 Realistic 0154, 0180, 0030, 0178, 0056, 0019, 0165 Runco 0017, 0030 SSS 0180, 0019 Sampo 0030 Samsung 0060, 0030, 0178, 0056, 0019 Sansei 0451 Sansui 0463 Sanyo 0154 Scimitsu 0019 Scotch 0178 Scott 0236, 0180, 0178, 0179, 0019 Sears 0047, 0747, 0054, 0154, 0156, 0178, 0179, 0056, 0171 Semivox 0180 Semp 0156 Sharp 0093, 0688, 0165 Shogun 0019 Signature 0016 Sony 0000 Soundesign 0180, 0178, 0179 Squareview 0171 Starlite 0180 Supreme 0000 Sylvania 0054, 0030 Symphonic 0180, 0171 TMK 0178, 0056 TNCi 0017 Tandy 0093 Technics 0051, 0250 Technol Ace 0179 Techwood 0051, 0056 Teknika 0054, 0180, 0150, 0060, 0179, 0056, 0019, 0016, 0092 Telefunken 0056 Toshiba 0154, 0156, 0060 Vector Research 0030 Victor 0053 Vidikron 0054 Vidtech 0178, 0019 Wards 0054, 0030, 0178, 0021, 0179, 0056, 0019, 0016, 0165 White Westinghouse 0463, 0623, 0624 Yamaha 0030, 0019 Zenith 0017, 0463, 0624, 0016, 0092

Page 5 of 15

PROGRAMMING VCR/DVD PLAYER CONTROL
Locate the brand name of your VCR in Setup Codes for VCRs on the next page, your DVD player in Setup Codes for DVD Players on the next page, and write it in the appropriate space below. VCR Brand: ________________________________ or DVD Player Brand: ____________________________
The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Millennium 4 to operate your VCR or DVD player: 1. Turn on your VCR and insert a video cassette, or turn on your DVD player and insert a DVD. 2. On the Millennium 4, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your VCR or DVD player. If you perform this procedure correctly, the LED will blink twice.
4. Aim the Millennium 4 at the VCR or DVD player and press POWER once. The device should turn off. If your VCR remote control does not have a POWER key, press PLAY. If the device does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If the device still does not work, try searching for the code (see Searching For Your Code on page 12). 5. For future reference, write your devices code and type in the boxes and space below.
Device Type:________________________
NOTE: Remember, to use the Millennium 4 to operate your VCR or DVD player, press VCR first.

Page 6 of 15

SETUP CODES FOR VCRs:
Admiral 0048, 0209 Adventura 0000 Aiko 0278 Aiwa 0037, 0000 Akai 0041 America Action 0278 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0121, 0209, 0002, 0479, 0295 CCE 0072, 0278 Calix 0037 Canon 0035 Carver 0081 Cineral 0278 Citizen 0037, 0278 Colt 0072 Craig 0037, 0047, 0240, 0072 Curtis Mathes 0035, 0060, 0162, 0041 Cybernex 0240 Daewoo 0045, 0278, 0561 Denon 0042 Dynatech 0000 Electrohome 0037 Electrophonic 0037 Emerex 0032 Emerson 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0479, 0561, 0295, 0294 Fisher 0047, 0104 Fuji 0035, 0033 Funai 0000 GE 0035, 0060, 0048, 0240 Garrard 0000 Go Video 0432, 0526, 0643, 0232, 0279 GoldStar 0037 Gradiente 0000 HI-Q 0047 Harley Davidson 0000 Harman/Kardon 0081 Harwood 0072 Headquarter 0046 Hitachi 0000, 0042, 0041, 0105 Hughes Network Sys. 0042 JVC 0067, 0041 Jensen 0041 KEC 0037, 0278 KLH 0072 Kenwood 0067, 0041 Kodak 0035, 0037 LXI 0037 Lloyds 0000 Logik 0072 MEI 0035 MGA 0240, 0043 MGN Technology 0240 MTC 0000, 0240 Magnasonic 0278 Magnavox 0035, 0039, 0081, 0000 Magnin 0240 Marantz 0035,0081 Marta 0037 Matsushita 0035, 0162, 0454 Memorex 0035, 0037, 0048, 0039, 0047, 0162, 0000, 0240, 0104, 0209, 0454, 0479, 0046 Minolta 0042, 0105 Mitsubishi 0048, 0067, 0043 Motorola 0035, 0048 Multitech 0000, 0072 NEC 0067, 0104, 0041 Nikko 0037 Noblex 0240 Olympus 0035 Optimus 0037, 0048, 0162, 0104, 0454, 0432 Orion 0184, 0209, 0002, 0479, 0295 Panasonic 0035, 0225, 0162, 0454, 0616 Penney 0035, 0037, 0042, 0240 Pentax 0042, 0105 Philco 0035, 0209, 0479 Philips 0035, 0081, 0618 Pilot 0037 Pioneer 0067 Polk Audio 0081 Profitronic 0240 Proscan 0060 Protec 0072 Pulsar 0039 Quarter 0046 Quartz 0046 Quasar 0035, 0162, 0454 RCA 0035, 0060, 0048, 0042, 0240, 0105, 0060 RadioShack 0000 Radix 0037 Randex 0037 Realistic 0035, 0037, 0048, 0047, 0000, 0104, 0046 ReplayTV 0614, 0616 Runco 0039 STS 0042 Samsung 0045, 0240 Samtron 0643 Sanky 0048, 0039 Sansui 0000, 0067, 0209, 0041, 0479 Sanyo 0047, 0240, 0104, 0046 Scott 0184, 0045, 0121, 0043 Sears 0035, 0037, 0047, 0000, 0042, 0104, 0046, 0105 Semp 0045 Sharp 0048 Shintom 0072 Shogun 0240 Singer 0072 Sony 0035, 0032, 0000, 0636, 0033 Sylvania 0035, 0081, 0000, 0043 Symphonic 0000 TMK 0240 Tatung 0041 Teac 0000, 0041 Technics 0035, 0162 Teknika 0035, 0037, 0000 Thomas 0000 Tivo 0618, 0636 Toshiba 0045, 0043 Totevision 0037, 0240 Unitech 0240 Vector 0045 Video Concepts 0045 Videosonic 0240 Wards 0035, 0060, 0048, 0047, 0081, 0000, 0042, 0240, 0072 White Westinghouse 0209, 0072, 0278 XR-1000 0035, 0000, 0072 Zenith 0039, 0000, 0209, 0479, 0033

SETUP CODES FOR DVD PLAYERS:
Aiwa 0641 Apex 0672 B & K 0655, 0662 Denon 0490, 0634 Fisher 0670 GE 0522 Gradiente 0651 Harman/Kardon 0582 Hitachi 0573, 0664 Hiteker 0672 JVC 0558, 0623 Kenwood 0534, 0682 Konka 0711, 0719, 0720, 0721 Magnavox 0503, 0675 Marantz 0539 Mitsubishi 0521 Onkyo 0503, 0627 Optimus 0571 Oritron 0651 Panasonic 0490, 0677, 0632, 0678, 0679 Philips 0503, 0539 Pioneer 0525, 0571, 0632 Proscan 0522 RCA 0522, 0571 Samsung 0573 Sharp 0630 Sherwood 0633 Sony 0533 Technics 0490 Techwood 0692 Theta Digital 0571 Toshiba 0503 Yamaha 0490, 0545 Zenith 0503, 0591

Page 7 of 15

PROGRAMMING TV/VCR COMBO CONTROL
Locate the brand name of your TV/VCR Combo in Setup Codes for TV/VCR Combos below, and write it in the space below. TV/VCR Combo Brand: ________________________ The brands are listed in alphabetical order with popular codes listed first. You will use one of these codes to program the Millennium 4 to operate your TV/VCR Combo: 1. Turn on your TV/VCR Combo and insert a video cassette. 2. On the Millennium 4, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your TV/VCR Combo. If you perform this procedure correctly, the LED will blink twice.
4. Aim the Millennium 4 at your TV/VCR Combo and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 12). 5. If youve found a TV/VCR setup code that works your TV/VCR Combo and a separate TV code is also listed, youll need to program this code into the Millennium 4 to access volume control (see Programming TV Control on page 8). If there is no separate TV code listed, you will need to perform the following steps to access volume control: a. Press and hold SETUP until the LED blinks twice, then release SETUP. b. Enter 9 - 9 - 3.The LED will blink twice. c. Press VCR once. The LED will blink twice. 6. Write your TV/VCR Combo code in the boxes below for future reference.
NOTE: Remember, to use the Millennium 4 to operate your TV/VCR Combo, press VCR first.
SETUP CODES FOR TV/VCR COMBOs:
American High 0035 (for TV use 0051) Brocksonic 0002, 0294, Colt 0072 Curtis Mathis 0035 (for TV use 0051) Daewoo 0278 Emerson 0002, 0294, 0479 Funai 0000 GE 0035 (for TV use 0051), 0060 (for TV use 0047), 0048 (for TV use 0093), 0240 Hitachi 0035 (for TV use 0051), 0000 HQ 0000 Lloyds 0000 MGA 0240 Magnavox 0081 (for TV use 0054), 0035 (for TV use 0051), 0000 Magnin 0240 Memorex 0037, 0162 (for TV use 0250) Mitsubishi 0048 (for TV use 0093) Orion 0002, 0294, 0479 Panasonic 0035 (for TV use 0051), 0162 (for TV use 0250) Penney 0035 (for TV use 0051), 0240, 0162 (for TV use 0250) Quasar 0035 (for TV use 0051), 0162 (for TV use 0250) RCA 0060 (for TV use 0047), 0035 (for TV use 0051), 0048 (for TV use 0093) Sansui 0000, 0479 Sanyo 0240 Sears 0000, 0037 Sharp 0048 (for TV use 0093) Sony 0032 (for TV use 0000) Symphonic 0000 Zenith 0000

Page 8 of 15

PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL
The Millennium 4 is preprogrammed at the factory to operate the cable converter given to you by your cable company. However, if you have another brand or model of cable converter or satellite receiver that you would like to control, then youll need to perform the following instructions to unlock the cable key, enter in a new code, and lock the cable key again.

To Unlock the CBL Key:

1. Turn on the Cable Converter or DBS Receiver. 2. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter 9 - 9 - 7.The LED will blink twice. 4. Press CH- once. The LED will blink twice.

To Program the CBL Key:

1. On the next page, locate the brand name of your Cable Converter in Setup Codes For Cable Converters, or DBS (Direct Broadcast Satellite) Receiver in Setup Codes For DBS Receivers, and write it in the appropriate space below. Cable Converter Brand: ________________ or DBS Receiver Brand: __________________
The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to reprogram the Millennium 4 to operate your Cable Converter or DBS Receiver. 2. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your Cable Converter or DBS Receiver. If you perform this procedure correctly, the LED will blink twice.
4. Aim the Millennium 4 at your Cable Converter or DBS Receiver and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 12). 5. Write your Cable Converter or DBS Receiver code in the boxes below for future reference.
NOTE: Remember, to use the Millennium 4 to operate your Cable Converter or DBS Receiver, press CBL first.

To Lock the CBL Key:

1. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 7.The LED will blink twice. 3. Press CH+ once. The LED will blink twice.

Page 9 of 15

SETUP CODES FOR CABLE CONVERTERS
ABC 0003, 0008 Americast 0899 Bell South 0899 General Instrument 0476 GoldStar 0144 Hamlin 0273 Jerrold 0003, 0476 Memorex 0000 Panasonic 0000 Paragon 0000 Philips 0305 Pioneer 0144, 0877, 0533 Pioneer 0533 Pulsar 0000 Quasar 0000 Regal 0273 Runco 0000 Samsung 0144 Scientific Atlanta 0008, 0477, 0877 Starcom 0003 Toshiba 0000 Zenith 0525, 0000, 0899

SETUP CODES FOR DBS RECEIVERS
Echostar 0775, 1005 Expressvu 0775 GE 0566 General Instrument 0869, 0892 HTS 0775 Hughes Network Sys. 0749 JVC 0775 Mitsubishi 0749 Next Level 0869, 0892 Philips 0749, 1076 Proscan 0392 RCA 0566, 0392 RadioShack 0869 Samsung 1109 Sony 0639 Star Choice 0869 Toshiba 0749
PROGRAMMING CHANNEL CONTROL LOCK
By activating this feature, the Millennium 4 will only allow access to the channel control capabilities of your cable converter. This will guarantee that you do not inadvertently change the channel on your TV or VCR.
To Activate Channel Control Lock:
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 6.The LED will blink twice. 3. Press CH+ once. The LED will blink twice. 4. Now, regardless of what mode you select (i.e., TV, VCR, or CBL), only the channel control capability of your cable converter will be accessible.
NOTE: This feature does not affect the Audio mode.
To De-Activate Channel Control Lock:
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 6.The LED will blink twice. 3. Press CH- once. The LED will blink twice. 4. The Millennium 4 will again provide TV and VCR channel control capabilities while in the TV or VCR mode.

Page 10 of 15

PROGRAMMING AUDIO CONTROL
Locate the brand name of your audio amplifier or receiver in the one of accompanying code lists at the end of this section. Write it in the appropriate space below. Audio Amplifier Brand: ________________________ or Audio Receiver Brand:__________________________
The brands are listed in alphabetical order with popular codes listed first. You will use one of these codes to program the Millennium 4 to operate your audio device: 1. Turn on the audio device. 2. On the Millennium 4, press AUDIO once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your audio device. If you perform this procedure correctly, the LED will blink twice.
4. Aim the Millennium 4 at your audio device and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 12). 5. For future reference, write your devices code and type in the boxes and space below.

NOTE: Remember, to use the Millennium 4 to operate your audio device, press AUDIO first.
SETUP CODES FOR AUDIO AMPLIFIERS:
Denon 0160 GE 0078 Harman/Kardon 0892 JVC 0331 Marantz 0892 Optimus 0395 Panasonic 0308 Philips 0892 Polk Audio 0892 Realistic 0395 Sony 0689 Soundesign 0078 Technics 0308 Victor 0331 Wards 0078 Yamaha 0354
SETUP CODES FOR AUDIO RECEIVERS:
ADC 0531 Adcom 0616 Aiwa 1405, 0121, 0405 Capetronic 0531 Carver 0008 Casio 0195 Clarinette 0195 Denon 1104, 1160 Garrard 0463 Harman/Kardon 0110, 0891 JBL 0110 JVC 0074 Kenwood 1313, 1027, 1570, 1569, 0186, 0077 Lloyds 0195 MCS 0039, 0346 Magnavox 0531, 0195, 0391 Marantz 0039 Modulaire 0195 Nakamichi 0097 Onkyo 0135 Optimus 1023, 0531, 0670, 0186, 0177 Panasonic 1518, 0039 Penney 0195 Philips 1269,1120, 0391 Pioneer 1023, 0531, 0014, 0150, 0630 Proscan 1254 Quasar 0039 RCA 1023, 1254, 0531, 0054, 0346 Realistic 0195 Sansui 0346 Sharp 0186 Sony 1058 Soundesign 0670 Sunfire 1313 Teac 0463 Technics 1308, 1309, 1518, 0039 Victor 0074 Wards 0014, 0054 Yamaha 0176, 1176, 0186 Yorx 0195 Zenith 0857

Page 11 of 15

SEARCHING FOR YOUR CODE
If your TV, VCR or DVD Player, Cable Converter, or Audio Component does not respond to the Millennium 4 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter 9 - 9 - 1.The LED will blink twice. 4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
NOTE: In the search mode, the Millennium 4 will send IR codes from its library to the selected component, starting with the most popular code first.
5. Press SETUP once to lock in the code. 6. To search for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., VCR, CBL, or AUDIO) for the (VCR or DVD, Cable, or Audio) component you are searching for.

CHECKING THE CODES

If you have set up the Millennium 4 using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1. Turn on your TV. 2. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter 9 - 9 - 0.The LED will blink twice. 4. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of LED blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box below.

NOTE: If a code digit is 0, the LED will not blink.
5. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes below. 6. To check for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., VCR, CBL, or AUDIO) for the (VCR or DVD, Cable, or Audio) component you are checking. Write down the codes in the appropriate boxes below. TV Code

VCR (or DVD Player) Code

CBL Code
AUDIO ___________________ Code

Page 12 of 15

PROGRAMMING THE TUNE-IN KEYS FOR SPECIFIC CHANNELS
The Millennium 4 includes three Tune-In keys (located directly below the PAGE keys). Each can be programmed to remember three of your favorite channel settings for a total of nine channels. If you want to change the channels in a previously-programmed Tune-In key, youll need to clear the key first (see below).
To Program a Tune-In Key:
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 5.The LED will blink twice. Then select a Tune-In key and press it once. 3. Press CBL once followed by the channel number to be programmed (e.g., 3 9).
NOTE: If you are programming a channel for a Digital Cable Converter, you need to enter all channels in a 3-digit channel format. For example, if the desired channel is 39, then enter it as 9.
4. Press and hold SETUP until the LED blinks twice, then release SETUP. 5. To add another channel, repeat steps 1 through 4 substituting the new channel to be added in step 3.
* NOTE: Programming more than three channels onto the same Tune-In key will overwrite previous settings.

To Clear a Tune-In Key:

1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 5.The LED will blink twice. Then select a Tune-In key you want cleared and press it once. 3. Press and hold SETUP until the LED blinks twice, then release SETUP. 4. This Tune-In key is now clear and ready for reprogramming (see above To Program a Tune-In Key). 5. If desired, repeat steps 1 through 4 to clear another Tune-In key.

Page 13 of 15

RE-ASSIGNING DEVICE KEYS
The Millennium 4 can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Millennium 4 control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUDIO key to operate the second VCR as follows: 1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 2. The LED will blink twice. 3. Press VCR once, then press AUDIO once. 4. The AUDIO key is now ready to be programmed for your second VCR. See Programming VCR/DVD Player Control on page 6. To re-assign other device keys, repeat steps 1 through 4 by substituting the key sequence from the following chart for a desired component: To Re-Assign TV as 2nd VCR key: TV as 2nd Audio key: TV as 2nd Cable key: TV back to TV: VCR as 2nd TV key: VCR as 2nd Audio key: VCR as 2nd Cable key: VCR back to VCR: AUDIO as 2nd TV key: AUDIO as 2nd VCR key: AUDIO as 2nd Cable key: AUDIO back to AUDIO: Perform Key Sequence SETUP - 9 - 9 - 2 - VCR - TV SETUP - 9 - 9 - 2 - AUDIO - TV SETUP - 9 - 9 - 2 - CBL - TV SETUP - 9 - 9 - 2 - TV - TV SETUP - 9 - 9 - 2 - TV - VCR SETUP - 9 - 9 - 2 - AUDIO - VCR SETUP - 9 - 9 - 2 - CBL - VCR SETUP - 9 - 9 - 2 - VCR - VCR SETUP - 9 - 9 - 2 - TV - AUDIO SETUP - 9 - 9 - 2 - VCR - AUDIO SETUP - 9 - 9 - 2 - CBL - AUDIO SETUP - 9 - 9 - 2 - AUDIO - AUDIO

Upon completion of a re-assignment, the LED will blink twice to confirm your selection. At that time, you will also need to program the Millennium 4 to control the new component. See previous sections on Programming TV Control, Programming VCR/DVD Player Control, Programming Cable Converter (or DBS Receiver) Control, or Programming Audio Control.

CHANGING VOLUME LOCK

The Millennium 4 is set to control volume of a component through your TV while in the TV, VCR, or Cable mode. However, in the Audio mode, you have separate control of your audio components volume. If your TV is not remote controllable, or if you would like the volume to be controlled by a different component, you can change the Volume Lock setting to control a volume through a nonassociated mode (e.g., through the cable in the TV mode).
To Change Volume Lock to the Cable Mode:
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press CBL once. The LED will blink twice. 3. Now, whenever you press VOL+, VOL-, or MUTE on the Millennium 4, volume will be controlled by your cable converter or DBS receiver.
To Change Volume Lock to the TV Mode:
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press TV once. The LED will blink twice. 3. Now, whenever you press VOL+, VOL-, or MUTE on the Millennium 4, volume will be controlled by your TV.
To Change Volume Lock to the VCR Mode:
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press VCR once. The LED will blink twice. 3. Now, whenever you press VOL+, VOL-, or MUTE on the remote, volume will be controlled by your VCR or DVD player.
To Change Volume Lock to the Audio Mode:
NOTE: Performing these steps will allow you to access the volume control of your audio component in all modes.
1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press AUDIO once. The LED will blink twice. 3. Now, whenever you press VOL+, VOL-, or MUTE on the remote, volume will be controlled by your audio component.

Page 14 of 15

TROUBLESHOOTING
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 4). -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: LED blinks when you press a key, but home entertainment component does not respond. SOLUTION: Make sure you are aiming the Millennium 4 at your home entertainment component and that you are within 15 feet of the component you are trying to control. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: The Millennium 4 does not control home entertainment components or commands are not performing properly. SOLUTION: Try all listed codes for the component brand being set up. Make sure all components can be operated with an infrared remote control. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: TV/VCR combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 8). -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: No volume on a second TV. SOLUTION: Follow instructions in Changing Volume Lock (see page 14). -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: CH+ , CH- , and LAST do not work for your RCA TV. SOLUTION: Due to RCA design (1983-1987), only the original remote control will operate these functions. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: Changing channels does not work properly. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the Millennium 4 after entering a channel number. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: Tried Search Method and still could not find a working code. SOLUTION: Try the Search Method again after clearing out the device key as follows: Press and hold SETUP until the LED (red light) blinks twice, then release. Next enter 9 - 9 - 2.Then press and release the device key to be cleared twice. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on, these products require programming TV codes on the Millennium 4. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ADDITIONAL INFORMATION

The Millennium 4 does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Millennium 4. For help via the Internet, visit us at: cable.rcinfo.com (do not type in http:// or www before the address) For help via e-mail, contact us at: CableHelp@ueic.com Copyright 2002 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc.

Page 15 of 15