MX-5000 Network Wand

WiFi Color Touch Screen with Haptic Feedback
The Pioneer in Control Technology

MX-5000 - Two Way Wand!

Form Follows Function.

Personal Browsing

The MX-5000 is a 2-way wand-style touch screen color remote that provides network control of many popular IP-based components. In addition to its stunning design it offers a fully customizable GUI on a large color screen that sends vibrating haptic feedback confirming each button selection.

Haptic (Touch) Feedback

The MX-5000 revolutionizes touch screen operation for all time! Its the first remote control utilizing haptic technology, which confirms button presses with a click you feel.
2-Way via Networked Audio Video Receivers
The MX-5000 is the master of IP (Internet Protocol) over your home network. Via a comprehensive 2-way database of the most popular IP controlled Audio Video Receivers from B&K, Denon, Integra and Yamaha, your MX-5000 can display the current status and browse the media options of networked Audio Video receiver. In operation, its incredible. Now, you can see the actual volume setting no matter what you are listening to or whether the TV is on or off. No more peering into the equipment rack just to make sure the volume isnt set too high! Whenever you touch the Volume Up, Down or Mute buttons on the MX-5000, a pop up display, connected real time with your AVR, displays the current volume as you adjust it. Once youve stopped adjusting volume, the popup display conveniently disappears!
Engineered to delight both the eye and the hand
The MX-5000s bright, vivid color touch screen is mounted in a remote control where every surface, every contour, and every button has been designed to feel right. Since WiFi 2-way delivers so much more fun, youll need twice the battery life of other products and the MX-5000 delivers it invisibly, without excess weight or bulk. The weight is perfectly positioned to balance in your hand. Contours are shaped and molded into the back so that your hand can find the perfect position. The entire rear is covered with a soft texture that feels perfect against your palm.
2-Way RS-232 via MRX-1 Network Base Station
The MRX-1 is a true bridge between the network and IR, RS-232 and relay-controlled devices. In addition, it provides 2-way status and feedback via RS-232 and a voltage/video sensor to network keypads and remotes. The MRX-1 serves as a converter to RS-232 controlled devices, enabling your MX-5000 to communicate over the network to an equipment rack located anywhere in your house. Since the conversion is both ways, your RS232 device can be both controlled and can update your
Each MRX-1 controls two 2-Way RS-232 Devices, one relay and up to six IR devices.
MX-5000 with the current status, and display volume pop ups, tuner interfaces and lists of AVR radio presets etc. all on the screen of the MX-5000. In addition, the MRX-1 provides the MX-5000 with control over relay and IR controlled devices.
Experience the Networked Home Th
Browse cover art, artist, album and titles from your iPod via the PSX-2 or a PC on your network
The revolutionary wand MX-5000 brings the power of WiFi networking to the home theater, without compromising simplicity. The high speed of the built-in 802.11 B/G WiFi transceiver enables the MX-5000 to display lists of artists, albums or songs and to display the cover art of the selected album on the Now Playing screen of the remote control from the PSX-2 Personal Server. The MX-5000 offers two independent communications and control methods simultaneously. It provides both a narrow band 418 MHz transmitter for instant control of conventional home theater components and a WiFi transceiver for high speed transfer of cover art, artist, album and title metadata.
The high speed of the built-in 802.11 B/G WiFi transceiver enables the MX-5000 to display lists of artists, albums or songs and to display the cover art of the selected album on the Now Playing screen of the remote control.
Internet Connection Provides Real Time News, Sports, Weather and Stocks
When the MX-5000 is connected to the Internet, pre-programmed modules enable instant access to personalized news, sports, weather and stocks. Unlike other devices, the MX-5000s news, sports, weather and stocks modules are user-configurable without a programmer or a PC. On a whim, you can check out the opposing teams scores, or get the weather forecast for a vacation destination.

Weather

Sports

Stocks

heater, all in one hand!
Real Time Volume Display on the MX-5000 Screen
Whenever you adjust the volume or press the Mute button, the MX5000 pops up a dynamic link to your IP controlled Audio Video receiver (the URC 2-Way database includes popular IP controlled products from Denon, Yamaha, Integra and B&K) and displays a bar graph on the screen of the MX-5000. If you need to adjust the sound before the movie starts, you can check the actual setting in real time, by simply touching one of the Volume buttons.
2-Way Display and Control of AM, FM, XM, and Sirius Radio
Browse the radio stations available to your IP controlled home theater receiver on the screen of the MX-5000 (the URC 2-Way database includes popular IP controlled Audio Video Recievers from Denon, Yamaha, Integra and B & K).
Native URC Lighting Control Touch the Screen to Set a New Scene!
At last, you can fully control the lighting in your home without expensive black boxes and exotic wiring. A lighting system can be as simple as a single URC RF lamp dimmer on a lamp that youd love to control without getting out of your chair. The MX-5000 directly controls lights connected to URC RF Dimmers and Switches. You can brighten, dim, and recall scenes, and you can store new scenes whenever you like, without a PC or a programmer. Simply manually adjust each dimmer to the new setting, then press and hold the scene button on your MX-5000 (just like storing radio stations in your car).
PSX-2: Personal Audio Video Server for the MX-5000
Advanced Personal A/V Server: PSX-2
CE Pro editor Julie Jacobson called it the best product of CES 2009. The PSX-2 turns any iPod into an advanced A/V server with onscreen GUI. It provides 2-way on-TV content browsing and selection with cover art plus hundreds of discrete IR commands that enable one touch to music programming. It also offers on-remote GUI when installed with URCs award winning MX-6000, MX-5000 or KP-4000 keypad.

Shortcuts to Any Content Instantly Without Menus
The Shortcuts button makes navigating from videos to musical genres a simple process. Example: Touch the Artists button on the shortcuts screen to jump directly to the Artists menu. Unlike other iPod docks or traditional music servers, you are not forced to constantly navigate up, down, left and right through a maze of menus to access new audio video content.
Explore Your Content: Shuffle Exactly What You Feel Like Listening To
With other music servers, shuffle is a frustrating mix of too many kinds of music. With the PSX-2, shuffle becomes a powerful tool for listening and exploring your music collection. Imagine shuffling just your jazz, or just the songs of a particular artist. You can shuffle play any genre, any artist or any album at any time by simply accessing the MX-5000s shuffle screen.

Play More From

Imagine exploring all the hard rock albums of your youth with Shuffle Genres. When you hear a song you love, instead of having to browse through the hundreds of artists in your collection, you simply touch the Play More From button. By then selecting the More from this Artist button, all the songs from the current Artist will be played in sequential order.

PC Server for MX-5000

Powered by
Converts any PC with iTunes or Windows Media Player into a Powerful Music Server with an Intuitive, Friendly User Interface
Instead of purchasing an expensive Media PC or dedicated music server, any PC with iTunes and/or Windows Media Player can be connected to your audio system to act as a high powered music server with the most engaging, intuitive user interface youve ever seen. Up to now, the complexity of having to deal with a keyboard and a mouse in your listening room has made this an uncomfortable choice. You know the frustrating feelingsome of your music was downloaded via iTunes and some of your music via Windows Media Player, youve had to keep separate libraries. Finding the music you paid for was difficult. MX-5000 Server is a software application that, once installed on a PC, combines your iTunes library with your Media Player library. The MX-5000 utilizes its network connection via WiFi to communicate with the server software on the PC. Since all communication happens at WiFi G speeds, there are no lags or delays displaying the information or lists on the screen of the MX-5000. All your cover art, artist, album and song title metadata appear on the screen of the MX-5000. Lists are navigated via the integrated Up and Down buttons on the remote without ever connecting a keyboard or mouse to the PC. You build a queue of whatever music in on your PC and shuffle or sequentially play it, just as you like. At last, you have access to all the music youve paid for. all the music you want without the hassles. the music simply plays.

The MX-5000 can control all the PCs connected to your system as long as each is accessible via your home local area network.
No Rules, Instant Control of Standard AV Components
Unlike other WiFi remote controls, the MX-5000 uses a second RF (Radio Frequency) transmitter to control conventional gear instantly, without the frustrating delay of waiting for the remote control to join the network when you simply want to turn the system on. This provides you with instant no rules control of AV receivers, flat screen TVs, projectors, cable and satellite receivers, DVD players and changers.
Narrow Band RF in either 418MHz or 433MHz
Narrow Band ensures that broadband RFI (Radio Frequency Interference) will be ignored. However, RFI can also be site specific and centered on a particular band. For this reason, the MX-5000 can be specified in either the standard 418MHz version or the MX-5000i 433MHz Narrow Band version.
Narrow Band RF Transmission
Ensure reliability with the Narrow Band RFX-250 or RFX250i (433MHz). The RFX-250 is included with both the RFX-250 for MX-5000 RFX-250i for MX-5000i MRF-350 Routing Base Station and the MSC-400 Master System Controller (specify i series for 433 MHz versions).
Double Capacity Lithium Ion Batteries and Charging Base
The demands of WiFi and high speed transfers coupled with a large color touch screen raise the demand for power to a new high. The MX-5000 is equipped with a unique double capacity Lithium Ion battery, providing over 4 hours of continuous use before recharging is necessary. Should the MX-5000 be left on a table, it will remain in standby mode for 9 days without requiring a recharge. The attractive charging base offers an ideal angle to use while charging, so may be placed on or near your chair. In addition, the MX-5000 offers a power input at the base of the remote, so that it can be hand held while charging directly from the power adapter.

Automatic Backlighting

The integral motion sensor detects any movement of the touch screen and automatically backlights the screen. The user does not have to press any button to display the screen. Any movement of the MX-5000 renews the backlighting. Without movement, the touch screen stays lit for 1 to 99 seconds (programmed by the installer).
Not Just Color, Animated Color!
Powered by a 533MHz ARM9 microprocessor, the MX-5000 is designed for animation. The powerful central processor enables quick, fluid page transitions and animated macros.

Learn more. Visit URC at www.universalremote.com or explore URCs rich learning opportunities at www.urccontrolroom.com/LP_training/

MSC-400 Compatibility

The MX-5000 is compatible with the ultra-reliable MSC400 Trigger protocol, which enables complex macros, stored in the MSC-400, to be individually triggered with a single button push on the MX-5000 regardless of the interference and noise in the environment. The combination of very narrow transmission of digitally encoded packets sent THREE times at digital speeds in milliseconds assures that every button press on the
MX-5000 is compatible with the MSC-400 Master System Controller
remote will be received by the MSC-400. The MSC-400s sophisticated error correction circuitry stores all three packets and compares them. Once two packets are identified as identical, the MSC-400 goes to work. This new technology not only increases range, but increases reliability by a vast margin.

Specifications

Microprocessor: 533MHz ARM9 RAM: 128Mbyte Mobile DDR NAND: 64Mbyte LCD: 2.8 Inch Screen (240 by 360) LCD Backlighting: By LED Sound: 2 x 1 watt Devices: Supports up to 255 Devices with text, less with heavy graphics usage Pages: Supports up to 255 Pages on each Device with text, less with heavy graphics usage Learning Capability: Standard frequencies (20kHz to 455kHz) Macro Capability: Up to 255 steps each, however nesting is allowed IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment RF Frequency: 418MHz (MX-5000i is 433MHz) RF Range (Radio Frequency): 50 to 100 feet, depending upon the environment WiFi: IEEE 802.11 B (11Mps), G (54Mps) Battery: Lithium Ion, 4800 mA hours; charging base included Battery Capacity: 4 hours continuous use, 9 days standby Battery Charging Time: 7 Hours Dimensions: 8.8 Height x 2.4 Wide x.9 Thick Weight (without AC Adapter): 7.8 oz
500 Mamaroneck Avenue Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com

Operating Your System

With The MX-5000 Two Way Touch Screen
MX-5000 TWO WAY TOUCH SCREEN
This remote control was Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control. Only a Complete Control dealer has the requisite experience and training to quickly and effectively customize a remote control for true automated operation. Congratulations on your choice!
MX-5000 Owners Manual 2009 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Table of Contents

Introduction Connecting the Battery Pack Using the Charging Base Two Way via Wi-Fi Optional RF No Rules Operation Operating Your System Using Two Way Personal Server Features Revolutionary New iPod Controls Displaying the Settings Screen Sleep Settings Network Brightness System Button Light Power Settings Calibration Date and Time Sound Pickup Settings Factory Default Exit Maintaining Your MX-5000 USA Limited Warranty Statement Specifications 12 14

Congratulations

Youve purchased a unique synthesis of hardware and software engineering, the Complete Control MX-5000. The twin goals of the design team were to improve the elegance and usability of touch screens through the physical design while providing a new standard in brightness, clarity and animation for the touch screen itself.

Easy Operation

By assigning the important home theater operational buttons to the natural resting place of the end users thumbs, the MX-5000 achieves a new standard in use and comfort.

Automatic Backlighting

The integral motion sensor detects any movement of the touch screen and automatically backlights the screen. You do not have to press any button to display the screen. Any movement of the MX-5000 renews the backlighting. To adjust the backlighting, see page 12.

Programming the MX-5000

To fully automate an audio/video system and integrate two way automation of servers etc. the programmer must have a detailed knowledge of each component, LAN configuration, Wi-Fi optimization and how the system is connected and operated. Only a trained and certified professional audio/video installer can install an MX5000 automation system in a timely and efficient manner.

How do I reset MX-5000

Normally, resetting MX-5000 is not necessary. However, if MX-5000's touch screen freezes or if you notice unusual behavior, you should press the MAIN and EXIT buttons simultaneously for 3 seconds (It will restart the MX-5000).

Page 1

Connecting the Battery Pack
Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the MX-5000. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the MX-5000. The battery will snap into place when aligned properly. Replace the cover and snap it into place.

Using the Charging Base

Plug the 6V DC adapter into a power outlet and into the back of the charging base. Gently place the MX-5000 into the cradle of the charging base. It automatically aligns itself to the contacts on the charging base. The Status light should immediately light. Red indicates that it is charging. Blue shows that it is fully charged. There is no harm in leaving the MX- Red indicates charging, Blue that the remote is fully charged. 5000 on its charging base whenever it is not in use.

Two Way via Wi-Fi

To use the MX-5000 with any two way companion product, the MX-5000 must be configured by your installer to be part of a LAN (local area network) via a Wi-Fi b/g access point or router. This is not user configurable. If you have any questions, consult with your custom installer.

Page 2

Optional RF No Rules Operation
In combination with an MSC-400 Master System Controller, or an RF Base Station, the MX-5000 can control your system without being in line-of-sight of the equipment. The MSC-400 enhances the capabilities of the MX-5000 by storing and issuing Smart Macros to your main system components. It is triggered by RF Smart Macro commands via RF (radio frequency). In addition, your MX-5000 can control components in secondary rooms and systems via MRF-350 or MRF-260 RF base stations.
1. The MX-5000 sends radio waves in every direction, so you dont have to point the remote anymore!
2. The RFX-250 RF Sensor can be freely positioned for optimal reception. 3. The MSC-400 can control IR, RS232 and Relay controlled devices.
4. Self-adhesive Flashers affix to the Infrared sensors on the front panels of your components. Uniquely, all Complete Control base stations can also connect to components with rear panel IR Inputs via adjustable IR Line Outputs. The MSC-400 offers RS-232 control via rear panel connections as well. Page 3
The MX-5000s main pages display the activities and devices in your system. Press the main page button to see what your choices are. Large systems may have more than one page. Press either of the Page buttons if you dont see all your devices. Gently press any screen button with your finger to select an activity or a device. The screen will change to a display of the buttons you need for that activity/device. The Page buttons may reveal additional buttons for some devices and activities. When you would like to control another device, press the main page button and select a new device from the main page.

The main button always displays the main menu pages. The Page buttons display additional pages of controls.
The Volume and Mute buttons are always available regardless of what screen is displayed.
The 4 way cursor buttons enable you to both scroll lists of artists, albums or songs from your Music Server on the MX-5000 touch screen or to navigate TV guides and menus with ease.

Page 4

Using Two Way Personal Server Features
Step 1 Insert an iPod into the PSX. The Universal Remote Control screen appears on the iPod. This means its connected to the dock and ready for use with the MX-5000 remote control. Step 2 Select the dock you want to listen to from the Main page of your MX-5000. Step 3 If the system has just been turned on, you may see the message, Connecting to iPod Dock. Once the MX-5000 has connected to the iPod Dock, the iPod menu screen appears. If the iPod is already playing, the Now playing screen appears. Step 4 When you browse for new content, press the Menu button. The browse screen appears. On the MX-5000, you can navigate lists on the screen in two ways. Either flick the list by touching the screen or place your thumb on the Up Down arrow buttons. When you see the item you want, you can either touch it on the MX-5000 screen, or you can press the OK button. The Now Playing Screen appears after a selection is made. Flick the list to make the list scroll. Or, Press the Cursor Up and Down buttons to make the list scroll.
Touch the item you want on the touch screen.
The Menu Button reveals the last menu list you accessed. Operates like the iPod. Transport Controls enable you to play, pause, skip tracks or fast forward and rewind whatever is playing.

Page 5

The Right Page button, labeled Now Playing returns the screen to the now playing screen.
You can also press the OK button to select the item you want.
Revolutionary New iPod Controls
The heart of your new personal server experience is found on your MX-5000 by pressing the Controls button. This reveals the unique personal server features only found on the MX-5000. The Page button is now labeled Controls and always accesses theunique iPod Controls screen.

Once the Controls screen appears, simply tap the feature you want: Shortcuts to finding playlists, albums, artists, etc. without using the Menu button. More from this artist, this album, this genre, even this composer. Music Search enables you to alphabetically search for any artist, album, song or playlist. Shortcuts: The Shortcuts screen makes navigating your iPod easier than ever before. Touch any button to jump directly to that menu. Example: Touch the Artists button to jump directly to the Artists menu.

Page 6

Shuffle exactly what you want (this album, this artist, this genre, etc.)
Jukebox lets you build and manage your own playlist without accessing your PC.
Flick the list to reveal more shortcuts, or use the Up and Down Cursor buttons. Touch the item you want or use the OK button.
Shuffle: The Shuffle screen enables you to easily shuffle just what you want. The currently playing album, artist, genre or playlist, or flick the list to reveal new revolutionary shuffle options. You can choose to shuffle any artist, any album, any genre, or even any composer. For example, at the bottom of the list, select Another Genre, then select Jazz to Shuffle just your Jazz music. Play More From: The Play More From button enables you to play more from the currently playing artist, album, genre or composer. Imagine how powerful this is when you are exploring your music using shuffle play. Anytime you hear someone you are curious about, touch the Play More From button and explore their work. Jukebox: The Jukebox button opens a menu of choices allowing you to create a jukebox playlist anytime, right on your MX-5000. Touch the add song to Jukebox icon or add album to jukebox to add the currently playing song or album to the jukebox. To play the jukebox, touch the play jukebox icon. To edit the jukebox, touch the view jukebox icon. Note: the Jukebox playlist is not cleared if you remove and replace the same iPod. However, it will be erased, if you replace the iPod with a different one, or in the event of a power failure. Edit Jukebox: Songs can be moved up, down or deleted from the jukebox list by using the control keys on the bottom of the view jukebox screen. To exit from the View Jukebox screen, touch either the Left Page button (labeled Go Back) or the Right Page button (labeled Now Playing).

Page 7

Using the Alpha Search Feature: The search button appears in the center of the bottom of the screen whenever you are browsing lists of artists, albums, songs, or playlists. Simply click on Search, and an alphabetical keyboard appears. Type in as many characters as you like and touch Go. The Music Search screen will appear. Select the category youd like to search.
The Left Page button (now labeled Go Back) takes you back to the last list you were browsing.
Using the 10 Key Cell Phone Style Keyboard If you find the keyboard buttons to small, touch the Right Page button (now labeled 10 Keys). This reveals a screen that allows you to type the same way you do with small cell phones. For example, if you want to type the letter C, press the ABC2 button. A pop up of ABC2 will appear. Touch C and the letter is entered. Press Go when you are ready to search, then select the category.

Page 8

Displaying the Settings Screen
You can adjust the settings of the MX-5000 whenever you like by pressing and holding the main + OK button for three seconds. When you do, the screen will change to the Settings screen. If you do not press any button on the Settings screen within 30 seconds, the MX-5000 will time out and automatically return to normal operation.
Page 2 of the Settings Screen
Page buttons reveal the rest of the settings.
There are two pages of Settings screen. To access the other page, press either of the Page buttons.

Sleep Settings

Wi-Fi and Backlighting can be separately adjusted to conserve battery life. Note that if Wi-Fi is disconnected, the MX-5000 will take an additional 4-10 seconds to connect to the network when a two way device is started.

Network

WARNING! Only use this button when instructed to by Technical Support. The Network screen displays network information about your MX6000 and the wireless network it is connected to. Do not make any changes on this screen!

Page 9

Brightness
Adjust the screen brightness by moving the slider. Min is the dimmest setting and Max is the brightest setting.

System

The System Information screen displays data about your MX-5000's operating system, memory etc.

Button Light

You can adjust the brightness of the LEDs that backlight the buttons of the MX-5000. Move the slider to the left to dim the backlighting and move it to the right to brighten the backlighting.

Power Settings

You can display the remaining charge by selecting Power. You can also adjust when the low battery warning screen will appear.

Page 10

Calibration
If you like, you can calibrate where you tap by running the calibration. You will need a pen top or PDA stylus to do this. Do not attempt to calibrate using your fingers.

Date and Time

Your MX-5000 may have been programmed to display the time or date on the touch screen. If you need to, you can adjust the time displayed by changing the settings on this screen. If you live in a part of the country that uses daylight savings time, check the box next to: "Automatically adjust time for daylight savings time".
You can adjust the volume or touch vibration to any level you like by touching and dragging the volume control.

Pickup Settings

You can set your MX-5000 to only turn on when touched, or every time you move it. Simply select on or off. And you can adjust the pickup sensitivity with slide bar.

Factory Default

WARNING! Only use this button when instructed to by Technical Support. It resets the memory of the MX-5000 to the factory condition. All your programming will be lost!
When you have finished adjusting Settings, simply tap the EXIT button to return to normal operation.

Page 11

Maintaining Your MX-5000
Be careful not to scratch the touch screen, only use your finger to tap the LCD touch screen or use a plastic pen top or PDA stylus. Never use a real pen, pencil or any other sharp object on the screen. Keep it away from extreme cold or heat. The MX-5000 is not waterproof. Do not use it in any location that is damp or wet. If you spill water on it, take out the battery pack and let the MX-5000 dry for 48 hours before you try powering it up again. If you spill coffee or another beverage on it, clean it with distilled water. Make sure no water gets inside the MX-5000. The touch screen contains a glass element. Dont drop the MX-5000 or impact it against anything. Use a soft, damp cloth to clean the screen. If the screen still shows finger prints, clean it with watered down window-cleaner. Do not use anything abrasive and dont use too much water, some might leak into the interior. Precautions & Information: Rechargeable Lithium Ion Batteries If you will not be using your remote control for an extended period of time, be sure to remove the battery. Do not attempt to disassemble, alter or apply heat to the battery. Use care to avoid dropping the battery or subjecting it to severe impact that could damage the case. The battery should not be immersed in water. Lithium Ion batteries are recyclable. For the address of a recycle drop-off location near you call toll free 1-800-822-8837 or visit http://www.rbrc.com
USA Limited Warranty Statement

Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. In the event of a defect, these are your exclusive remedies. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided "AS IS" unless expressly provided for in any enclosed software Limited Warranty.

Page 12

To obtain warranty service, you must deliver the product, freight prepaid, in its original packaging or packaging affording adequate protection to Universal Remote Control at the address provided in the Owner's Manual. It is your responsibility to backup any macro programming, artwork, software or other materials that may have been programmed into your unit. It is likely that such data, software, or other materials will be lost during service and Universal Remote Control will not be responsible for any such damage or loss. A dated purchase receipt, Bill of Sale, Installation Contract or other verifiable Proof of Purchase is required. For product support and other important information visit Universal Remote Control's website: http://www.UniversalRemoteControl.com or call the Universal Remote Control Customer Service Center (914) 835-4484. This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, thirdparty installation, misuse, limitations of technology, or modification of or to any part of the Universal Remote Control product. This Limited Warranty does not cover Universal Remote Control products sold as USED, AS IS, REFURBISHED, so-called "B STOCK" or consumables (such as batteries). This Limited Warranty is invalid if the factoryapplied serial number has been altered or removed from the product. This Limited Warranty is valid only in the United States of America. This Limited Warranty specifically excludes products sold by unauthorized resellers. UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATEMENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state or jurisdiction to jurisdiction.

Page 13

Specifications
Microprocessor: 533MHz ARM9 RAM: 128Mbyte Mobile DDR NAND: 64Mbyte LCD: 2.8 Inch Screen (240 by 320) LCD Backlighting by LED Sound: mono 1 watt USB: 2.0 Devices - Supports up to 255 Devices with text, less with heavy graphics usage Pages - Supports up to 255 Pages on each Device with text, less with heavy graphics usage Learning Capability - Standard frequencies (20kHz to 455kHz) Macro Capability - Up to 255 steps each, however nesting is allowed IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment RF Frequency: 418MHz RF Range (radio frequency): 50 to 100 feet, depending upon the environment Wi-Fi: IEEE 802.11 B (11Mps), G (54Mps) Battery: Lithium Ion, 2400mAh Battery Capacity: 4 hours continuous use, 9 days standby Battery Charging Time: 5 Hours Dimensions: 8.8 Height x 2.3 Wide x 0.9 Thick Battery Warranty : 1 Year Weight (without AC Adapter): 7.8 oz

Page 14

Page 15

Page 16

www.universalremote.com

OCE-0073A REV 01