Universal Remote Control

Model: SL-7000

OPERATING MANUAL

Thank you for purchasing the Star Light universal remote control. This unit was desingned to fully complement your home entertainment system. Any comments or questions about this product should be directed to Universal Remote Control, Inc., New Rochelle, NY 10801. You can also call our toll-free Customer Service Line at 1-800-901-0800 for any assistance.
Please read this instruction manual carefully. The Star Light universal remote control has many advanced features that can add enjoyment and convenience during its use. Keep these instructions for future reference.

Table of Contents

Introduction... 4 Battery Installation... 5 Programming the Remote... A. Quick Set-Up C. Standard Set-Up Advanced Features.. A. Code Number Recall B. Storing Multi-Commands/Favorite Channels to emory Buttons C. Assigning Device Codes to other Device Buttons D. Punch-Through TV Volume Control E. Punch-Through VCR Control Satellite key pad Information... 13 Hidden Buttons... 13 Glossary... 13 Warranty and Specifications.. 14 Three Digit Code Lists..A. TV Codes B. VCR Codes C. CATV Codes D. SAT Codes E. Audio Codes F. Aux Codes Satellite Functions by code.. 31~44

INTRODUCTION

The Star Light universal remote control can replace or consolidate up to six (6) of your remote controls. It is already preprogrammed, so there is no need to have your original remote. The Star Light universal remote works with virtually all IR (Infrared) equipment, including : TV' s, VCR's, Cable Boxes, Satellite Receivers, Compact Disc Players, A/V Receivers, Cassette Decks, and many other audio /video components.

Battery Installation

The Star Light remote control is powered by four AAA batteries (included). Please be sure to match the (+) and (-) on the batteries to the (+) and (-) marking inside the battery compartment.
Battery Compartment Cover Removal To remove the battery compartment, located on the rear of the remote, press down and push forward toward the top of the remote control. To close the battery compartment cover, slide the cover straight back until it clicks into place. Diagram for opening and closing of the battery cover is shown below.
Note : When changing batteries, please replace the new batteries within ten minuites. Otherwise, resetting of your codes may be required.

Programming the Remote

A. Quick Set-Up:
Step 1: Turn on the device (TV, VCR,CABLE BOX, SATELLITE RECEIVER,etc.) you wish to operate. Step 2: On the remote control, press the corresponding DEVICE button (TV, VCR, CATV, SAT, etc.) and MUTE button simultaneously. Note: SET will appear in the LCD. Step 3: Point the remote control toward the device. Punch in the first three digit code number assigned to your brand from the brand code lists located on pp.(15 30).The device will turn off when the correct code has been selected. Step 4: Once the device turns off, press the corresponding DEVICE button again to store the code. Note: LCD will flash PASS indicating that the code has been stored. Step 5: Test the remote control functions with the code that was just stored. If any of the buttons do not perform as they should, please repeat from Step 2 using the next three digit code number for your brand of equipment.

Programming the Remote,( Continued )

C. Standard Set-Up:

Step 1: Turn on the device ( TV, VCR, Cable Box, Satellite Receiver, etc. ) that you wish to operate. Step 2: On the Star Light universal remote control, press the corresponding DEVICE button (TV, VCR,CATV, SAT,Audio,or Aux) and the MUTE

button simultaneously.

Note: SET will appear in the LCD. Step 3: Locate the three digit code number for your brand of equipment from the code lists found on pp. (15 31). Example: TV codes-Sony 001,003,etc. Note: If the brand list contains more than one code number, select the first code listed. Step 4: Point the remote control at the devise turned on in Step1 and press in the three digit code number selected in Step 3. Note: SET # # # will appear in the LCD. Your device will turn off when the correct code has been selected. If the device fails to turn off, go back to Step 3 and select the next three digit code for your equipment, and press in the code number. Note: Repeat the above step until the device turns off. When the device turns off proceed to Step 5. Step 5: Press the DEVICE button (TV, VCR, CATV, SAT, Audio, Aux) on the remote control to store the three digit code that turned off your equipment. Note: PASS will flash in the LCD indicating that the code has been stored. Step 6: Test the remote control functions with the code just stored. Example: Power, Channel Up, Volume Up, etc. If any of the buttons do not perform as they should, please repeat from Step 2 using the next three digit code until the right code is found. Step 7: To program other devices into the corresponding Device button of the remote control, repeat the above steps with the respective devices and Device buttons.

Advanced Features

A. Three Digit Code Number Recall:
If you wish to find a code number that has been stored in your remote control, please use the following steps: Step 1: On the remote control, press the DEVICE and MUTE buttons simultaneously. Note: SET will appear in the LCD. Step 2: Press the INPUT button. The LCD will flash the three digit code number for five seconds before returning to its original sate.
B. Storing Multi-Commands/Favorite Channels to Memory Buttons
Memory buttons M1, M2, M3 and M4 can be set up to store up to six(6) commands with one button push. Any functions, in any Device mode (except Channel up and Channel down), can be stored in any one of the four memory buttons. This will enable you, for example, to turn on the TV and Satellite receiver and select a preassinged satellite channel with only one button push.
Method of setting up: Step 1: Press the Device button (TV, VCR, CATV, SAT, AUX, AUDIO) and MUTE button, simultaneously. Note: SET will appear in the LCD. Step 2: Press one of the memory buttons(M1-M4) that you would like to designate for multi-command or favorite channel operation. Note: M (1-4) will appear in the LCD. The memory button is now ready to be set up. Step 3: Press up to six commands that you would like to store in the memory button. Note: Each successive selection will appear as 1~6 in the LCD. Step 4: Press the Channel(+) button to store your selection. Note: SAVE will flash twice and the Device mode will appear in the LCD. Please repeat the above steps for the remaining memory buttons.

Example: Memory button M1 in the SAT mode can be set up to do the following functions: to turn on the Satellite receiver, select channel #18 on the satellite receiver, and then turn on the TV. Step 1:Press the SAT and MUTE buttons, simultaneously. Note: SET will appear in the LCD. Step 2:Press memory button M1. Note: M 1 will appear in the LCD. Step 3:Press the Power buttons (to turn on the satellite receiver). Note: M will appear in the LCD. Press the # 1 button (to select the first digit of channel # 18) Note: M will appear in the LCD. Press the # 8 button (to select the second digit of channel # 18) Note: M will appear in the LCD. Press the TV Device button (to select the TV Device mode). Note: M will appear in the LCD. Press the Power button (to turn on the TV). Note: M will appear in the LCD. Step 4:Press the Channel (+)button to store the above commands. Note: SAVE will flash and the current Device mode will appear. Now, anytime the memory button M1 is pressed while the remote control is in the SAT mode, the commands to turn on the Satellite receiver, select the Satellite channel #18 and turn on the TV, will be sent out by the remote control. Memory buttons can be used in any combination you select. Note: Any previously stored multi-commands on a memory button will be erased when new multi-commands are stored to that same memory button.
Advanced Features ( Continued )
C. Assigning Different Device Codes to other Device Buttons
This feature can be used to program the remote control for more than one TV, VCR, Satellite Receiver, etc. The three digit code for any device can be stored in any of the DEVICE buttons. For example: For two VCRs, the first VCR can be stored in the VCR DEVICE button under normal set up procedures, and the second VCR can be programmed into the unused CATV or any other DEVICE button.
Step 1: Turn on the device you wish to operate. Step 2: On the remote control, press the DEVICE button you wish to assign this device to, and the MUTE button simultaneously. Note: SET will appear in the LCD. Step 3: Press the DEVICE BUTTON that corresponds to the actual device you plan to operate. Note: SET will appear in the LCD. Step 4: Select the three digit code number from the code list found on pp. (15 30) for the device you will be operating Step 5: Point the remote toward the device, and press in the three digit code number. Note: SET # # # will appear in the LCD. Step 6: The device will turn off when the correct three digit code number has been selected. Press the DEVICE button selected in Step 2. This will store the three digit code into that DEVICE button. Note: PASS will flash in the LCD.

D. Punch Through TV Volume Control
After setting up the remote control to work with your respective TV, VCR, CATV, Satellite equipment, etc., the remote control can also be set up so that theTV volume control will supersede respective equipment volume control, even when the remote control is in a different Device mode.
Step 1: Press the DEVICE button (VCR, CATV, SAT, etc.)and MUTE button simultaneously. Note: SET will appear in the LCD Step 2: Press the VOLUME (+) button. Note: TV-O will appear in the LCD. Example: To set up TV volume to replace the satellite receiver volume in the SATmode. Step 1: Press the SAT and MUTE buttons, simultaneously. Note: SET will appear in the LCD. Step 2: Press the VOLUME (+) button Note: TV-O will appear in the LCD. TV volume will now operate in the SAT mode.
To return to the original volume control setting. Step 1: Press the DEVICE button(VCR,CATV,SAT,etc.) and MUTE button, simultaneously. Note: SET will appear in the LCD. Step 2: Press the VOLUME(+) button. Note: TV-X will appear in the LCD. The TV volume Punch Through for the selected device mode is now deactivated.
E. Punch Through VCR Controls.
After setting up the remote control to work your respective TV, VCR, CATV, Satellite equipment, etc, the remote control can also be set up so that the VCR control buttons (PLAY, STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will operate (VCR controls), even when the remote is in a different Device mode. For example, you can control your VCR while in the CATV mode, eliminating the need to switch between CATV and VCR modes to operate your VCR.
Step 1: Press the DEVICE button (TV, CATV, SAT, etc.) and MUTE button, simultaneously. Note: SET will appear in the LCD. Step 2: Press the VOLUME ( ) button. Note: VCR-O will appear in the LCD. VCR controls (PLAY, STOP, FF, REW,PAUSE, and RECORD) will now operate in the mode selected in Step 1. To return to the original state. Step 1: Press the DEVICE button ( TV, CATV, SAT, etc.) and MUTE button, simultaneously. Note: SET will appear in the LCD. Step 2: Press the VOLUME(-) button. Note: VCR-X will appear in the LCD. The VCR Punch Through for the selected mode is now deactivated.
Satellite key Pad Information
Many satellite receivers have a letter/ number assignment for satellite names and numbers. Since these assignments differ from one satellite manufacturer to another, we have listed the corresponding letter/ number designation by code on pages(31~44) Please copy the letters assigned to your code onto the peel off label we have included Place this label on the back of the remote control for future use.

Hidden Buttons

Eight (8) additional buttons are located beneath the VIEW, -, +, AMT, M1, M2, M3 and M4 buttons. They are NEXT, MESS, SET-UP, HELP, P.L, AUTO, T.I, and A/B buttons. To acess these hidden buttons, please lift up the cover by releasing the latch alonmg the top, right side of the remot.

Glossary

Device:
Audio and /or video equipment (Example: TV, VCR, Compact Disc, etc.) that is being controlled by the remote control.

Device Buttons:

Blue buttons located at the top of the Star Light remote control labeled TV, VCR, CATV, SAT, AUDIO, AUX.

Device Modes:

Operating modes displayed as TV, VCR, CABLE, AUDIO, AUX, or SAT in the LCD indicating the device the remote control is ready to operate.
Liquid crystal display screen at the top of the Star Light Remote. The LCD displays the device mode in normal operation. The LCD is also used in Set Up to program the Star Light Remote.

Three Digit Code:

Preprogrammed list of three digit numbers that corresponds to manufacturer's equipment.

Warranty

The Star Light remote control comes with a one year warranty from date of purchase.

Specifications

MODEL : SL-7000 BATTERY: Four 1,5 AAA Battery DIMENSION: (H x W x D) 8.88" x 2.75" x 1.25" WEIGHT: 6.6 oz. (with batteries)

Three Digit Code Lists

Maker (Brand) Name
A MARK AKAI AMPRO AMSTRAD ANAM AOC BLAUPUNKT CANDLE CAPEHART CETRONIC CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DYNASTY DYNATECH ELECTROHOME EMERSON 050 FISHER FUNAI FUTURETECH GE 155 091
Code Number (3 digit) List
GOLDSTAR HALL MARK HITACHI
INFINITY INKEL JBL JCPENNY JENSEN JVC KEC KENWOOD KLOSS KMC KTV LODGENET LOGIK LUXMAN LXI MAGNAVOX

143 127

MARANTZ MATSUI MEMOREX METZ MGA MINERVA MITSUBISHI MTC NAD NEC NIKEI

019 043

ONKING ONWA OPTONICA PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK RCA 152 REALISTIC RUNCO SAMPO SAMSUNG SANYO SCOTT SEARS SHARP SIEMENS SIGNATURE SONY SOUNDESIGN SPECTRICON SSS SUPRE MACY 043 002

SYLVANIA

127 140
TANDY TATUNG TECHNICS TECHWOOD TEKNIKA

077 103

TELEFUNKEN TELERENT TMK TOSHIBA TOTEVISION UNIVERSAL VIDEO CONCEPTS VIDTECH WARDS

116 143

YAMAHA YORK YUPITERU ZENITH ZONDA
AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO 119 DAYTRON DBX DYNATECH ELECTROHOME EMERSON 031 FISHER FUNAI GE GO VIDEO GOLDSTAR HARMAN KARDON HITACHI INSTANTREPLAY JCL JCPENNY JENSEN JVC KENWOOD LLOYD 034
LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA

145 147

REALISTIC RICO RUNCO SALORA

148 014

SAMSUNG

122 125

SANSUI SANYO SCOTT SEARS

042 073

SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH ViCTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH
ABC ANTRONIK ARCHER CABLE STAR CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD GE GEMINI GI GOLDEN CHANNEL HAML IN HITACHI HOSPITALITY JERROLD M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC OAK PANASONIC PARAGON PHILIPS
PIONEER POST NEWS WEEK PRUCER PTS PULSAR RCA REGAL REGENCY REMBRANT RK SAMSUNG SCIENTIFIC ATLANTA SHERITECH SIGNAL SIGNATURE SL MARX SPRUCER STARCOM STARGATE SYLVANIA TADIRAN TANDY TELECAPATION TEXSCAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH
AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR 100 ELECTRO HOME EUROPLUS FUJITSU GENERAL INSTRUMENT HOUSTON TRACKER HUGHES HYTEK JANIEL JERROLD KATHREIN LEGEND LUXOR MACOM MEMOREX NORSAT PANASONIC PANSAT PERSONAL CABLE PHILIPS 117 071
PICO PRESIDENT PRIMESTAR PROSAT RCA REALISTIC SATELLITE SERVICE CO SCIENTIFIC ATLANTA SONY STARCAST SUPER GUIDE TEECOM TOSHIBA UNIDEN 101 VIEWSTAR ZENITH 120
ADCOM AIWA AKAI ANAM BOSE CARVER CLARION DENON EVERQUEST FISHER FOSGATE AUDIONICS GOLDSTAR HAITAI HARMAN KARDON HITACH INKEL JCPENNY JENSEN JERROLD JVC KENWOOD LEXICON LUXMAM LXI MAGNAVOX MARANTZ MCINTOSH MCS MITSUBISHI NAD NAKAMICHI

244 245

NILES ONKYO OPTIMUS PANASONIC PHILIPS PIONEER QUASAR RCA REALISTIC ROTEL SANSUI SCIENTIFIC ATLANTA SCOTT SHARP SHERWOOD SONY SOUNDESIGN SSI STARCOM TAEKWANG TEAC TECHNICS TOSHIBA VICTOR WARDS XANTECH YAMAHA 253

ADC ADCOM AIWA AKAI AUDIO TECHNICA AUDIOACCESS AUDIOFILE BSR CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER CASIO CLARINETTE CROWN CURTIS MATHES DENON EMERSON FISHER FRABA FUNAI GE GENEXXA GOLDSTAR HAITAI HARMAN KARDON HITACHI INKEL JCPENNY JENSEN JVC 214

KENWOOD

KYOCERA LOTTE LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX MGA MISSION MITSUBISHI MITSUMI MODULAIRE NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS
PANASONIC PHILIPS PIONEER
PROTON QUASAR RADIO SHACK RCA
RCX REALISTIC 182 ROTEL SAE SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHERWOOD SIGNATURE SONY 226 SOUNDSTREAM STS SYLVANIA SYMPHONIC TAEKWANG TANDY TEAC 159 TECHNICS TECHWOOD THETA DIGITAL TOSHIBA VECTOR RESEARCH VICTOR WARDS YAMAHA YORX 116 182
Satellite Functions by Code

Fuction

ENTER DISPLAY INPUT FAVORITE CANCEL LAST MENU UP DOWN LEFT RIGHT SAT CODE
Guide Select/Display TV/DSS FAV Clear PREV CH Menu Up Down Left Right DSS
1G 2T 3F 4A 5W 6C 7S 8M 9K 0O Enter Category SAT/TV Favorite Cancel Funcition Mode Timer Up Timer Down East Down West Up C-SAT
1G 2T 3F 4D 5W 6C 7S 8R 9K 0B Enter View SAT/TV FAV Cancel AFC Mode Fine Tune Up Fine Tune Down East West Next SAT
1G 2T 3F 4A 5W 6C 7S 8R 9K 0B Enter View SAT/TV FAV CNCL Last Menu Up Down Left Right SAT
ENTER DISPLAY INPUT FAVORITE CANCEL LAST MENU UP DOWN LEFT RIGHT SAT
1G 2T 3F 4A 5E 6K 7C 8B 9S 0M Enter Source Priority Cancel Auto PK Menu Fine Up Fine Down East West SAT
1G 2T 3F 4A 5W 6K 7C 8B 9S 0X Enter Source Priority Cancel Auto PK Menu Fine Tune Up Fine Tune Down East West SAT
1/G 2/T 3/F 4/A 5/W 6/S 7/M 8/B 9/R 0/Z Enter View Favorite cancel

Format

Preset Up Preset Down Up East Down West
Menu Large Select Up Large Select Down Freeze East Left Swap West Right Satellite
1F 2W 3D 4A 5G 6S 7T 8M 9Z 0K Enter View Favorite Cancel Tuning Mode VOL Tuning Up VOL Tuning Down SAT UP SAT Down SAT
1/A 2/B 3/C 4/D 5/E 6/F 7/G 8/H 9/I Memory:Store
Enter View TV/SAT Priority Cancel Format NUM Fine Tune Up Fine Tune Down East West SAT
1F 2I 3D 4A 5V 6S 7T 8M 9E 0K
Select CW CCW Next SAT Fine Up SAT Fine Up SAT Fine Down SAT Preset Left:East SAT Preset Right:West Fine Down
Tuning Mode Tuning UP Tuning Down Satellite UP Satellite Down Satellite
1G 2T 3F 4S 5W 6X 7A 8M 9K 0Z Enter CHAN FAV Cancel Tune Menu Right Up Left Down Left Down Right Up SAT

1G 2T 3F 4E 5 /M 6C 7S 8R 9K 0B Enter View
Scan POL REV Anik Westar Comstar Satcom Satscan Power Satscan Up Satscan Down Tune Down Tune UP

Format REV

Format Satscan Power Satscan Up Satscan Down Tune Down Tune UP
Cancel POL Call C/KU/PROG Skew + Skew E Left Video Video Right W C/KU
Enter Display Auto Tune Cancel Satellite Number Tunning Up Tunning Down Next Satellite Left Next Satellite Right Satellite Name Seek Mode Ant Up Ant Down Ant Up Ant Down Format
G/1 T/2 F/3 D/4 W/5 C/6 S/7 X/8 K/9 M/0 Select Return Watch Favorite Movies Sports Type Cursor Up Cursor Down Page Left Page Right SAT
CNCL CALL > < E W SAT
Enter Display Favorite CH Cancel Number Tuning Up Tuning Down Next Sat < Next Sat > Name
1G 2T 3F 4A 5M 6E 7S 8R 9K 0B Enter Display FAV Cancel Select Mode Up Down Left Right SAT
1 G SET Up 2 S View 3 F MESG 4 C Help 5 M Text 6 E Enter 7 K Cancel 8B 9T 0A

Select Recall Ch.Scan

CH Step Up Step Down Left East Vol + Left West Vol SAT
Select Tune + Tune Ant Position East Ant Position West Recall
Enter Time Guide Select CNCL Return Guide Up Down Left E Right W Type
1C 2G 3R 4T 5S 6E 7K 8F 9B 0M Enter View SAT/TV FAV CNCL Mode Up Down Left Right SAT
Enter Display Favorite CH Cancel Auto Tune Satellite Number Tuning Select < > Satellite Name
1F 2G 3 4M 5A 6T 7S 8O 9G 0 Enter DISP
Cancel PGM Fine Tune Up Fine Tune Down Antenna Left Antenna Right SAT
1G 2E 3T 4F 5W 6S 7R 8M 9K 0C Enter TMR SAT/TV FAV Cancel Last Menu Up Down Left Right SAT
Enter View SAT/TV Buy Next Last, Go Back Menu Up Down Left Right View
1G 2E 3T 4F 5W 6S 7R 8M 9K 0C Enter View SAT/TV FAV Cancel Last Menu Up Down Left Right SAT
1/A 2/D 3/F 4/G 5/K 6/S 7/T 8/W 9/X 0/Z display-

Lock/Unlock

Enter Recall/SAT FAV Cancel Tuning Menu ADJ + ADJ
1G 2T 3F 4A 5W 6C 7S 8M 9 KU 0 VNR Enter Recall Sat Tuning Favorite Cancel Store
1 G (1) 2 T (2) 3 F (3) 4 A (4) 5 W (5) 6 X (6) 7 S (7) 8 M (8) 9 KU (9) 0 VNR (0) Enter Recall Sat Cancell/FAV Cancell/FAV Tuning(Select) Channel Up Channel Down Tuning Left Tuning Right

SAT/Recall

1/2 3/4 5/6 7/8 9/10 11/12 13/14 15/16 17/18 21/22 23/24 19/20 Plorotor CW Plorotor CCW Audio Fine CH1 Up Audio Fine CH1 Down ODD/Even Video Fine + Video Fine ANT.East ANT.West Satellite
1/G 2/T 3/F 4/A 5/W 6/C 7/S 8/M 9/K 0 Enter View
G (1) T (2) F (3) A (4) W (5) X (6) S (7) M (8) KU (9) VNR (0) Enter View
Enter SET TV/SAT Other Clear Seek CHAN/AF CH/AF Up CH/AF Down Dish E Dish W CHAN/AF
1G 2T 3F 4E 5M 6C 7S 8R 9K 0B Enter List Info Guide/FAV CNCL Record Menu Page + Page Left E Right W Call
Cancel Recall Menu Channel Up Channel Down SAT Left SAT Right Select
Recall(Cancel) Store Tuning Select Tune/VOL Up Tune/VOL Down East West SAT/Format
ENTER DISPLAY INPUT FAVORITE CANCEL LAST MENU UP DOWN LEFT RIGHT SAT CODE 043 CODE
Enter View PLOL FAV CNCL Menu Audio > Audio < E(Skew +) W(Skew ) Call
1G 2T 3F 4E 5M 6C 7S 8R 9K 0B Enter View SAT/TV FAV CNCL Scan Menu Audio Video E Left W Right Call
1G 2T 3F 4A 5W 6S 7M 8B 9R 0E Enter Category SAT/TV Favorite Cancel Menu Select Up Select Down Select Left Select Right Satellite
Enter Call A/B FUNC Cancel Last Satellite NO Video Fine + Video Fine SAT.Position East SAT.Position West Satellite Type
1 /Satcom 2 /Galaxy 3 /Westar 4 /Westar 5 /Anik 6 /Telstar 7 /Spacenet 8 /Other 9 /Other 0 Display BW Audio Clear
1G 2T 3F 4E 5M 6C 7S 8R 9K 0B Enter View Timer FAV CNCL Tune Menu CH Up Ch Down E W Call
1/2 3/4 5/6 7/8 9/10 11/12 13/14 15/16 17/18 19/20 23/24 21/22
NO Call SAT/TV DNR SCAN Mode Audio 1 Up Audio 1 Down East West Satellite
Play Stop REW FF Satellite
ODD Even East West Fromat/WE/SA
ENTER DISPLAY INPUT FAVORITE CANCEL LAST MENU UP DOWN LEFT RIGHT SAT CODE 051 CODE 052 CODE
1/F 2/G 3/W 4/M 5/A 6/S 7/T 8/X 9/Y 0/Z
1G 2T 3F 4A 5S 6W 7M 8K 9Y 0Z Enter View AUX Scan Cancel V/H Tune Up Tune Down East West Satellite

Fine Tune

Channel Up/East Channel Down/West Format
H/V Fine Up Fine Down East West AUD
SAT East SAT West Satellite
Store(Top) Level V/H Erase(Top) Select Up Tuning Down Tuning East West SAT Positioner
Enter Scan/Help Skew/Setup F-Tune/Next PRGM Bypass/Cancel Format/Message Channel Up/Right Down/Left Down/Left Up/Right SAT
1/G 2/T 3/F 4/A 5/W 6/X 7/S 8/M 9/KU 0/VNR Enter:SAT/FV CH View
V/H Fine Tune + Fine Tune East West ODD/EVEN
CAN/FAV PRG SAT/Last : ENT Tuning Sel
Tuning Left Tuning Right SAT/Last : ENT

3:13/ANI 4:14/COM 5:15/GAL 6:16/SAT 7:17/SPA 8:18/TEL 9:19/WEST 0

Clock/CH:Enter SAT/TV

Cancel V/H

SAT/TV

East Vest Satellite
CH 1/2 - 1 CH 3/4 - 2 CH 5/6 - 3 CH 7/8 - 4 CH 9/10 - 5 CH 11/12 - 6 CH 13/14 - Satcom CH 15/16 - Westar CH 17/18 - Comstar CH 21/22 - Other CH 23/24 - F CH 19/20 - Anik Normal Video Audio Step Channel Step Channel ODD Even East West SAT

A B C D E F G H I Select

Select
Info Action SAT/Local PREV.CH FAV Guide Up Arrow Down Arrow Left Arrow Right Arrow Select
Reset Seek Format Even ODD East West

East West Next SAT

Mode Antenna East Antenna West East West H/V
ENTER DISPLAY INPUT FAVORITE CANCEL LAST MENU UP DOWN LEFT RIGHT SAT CODE 069 CODE
1/F 2/W 3/D 4/A 5/G 6/S 7/T 8/O 9/ 10/ Preset Display
1 : V-FR 2 : V-BW 3 : V-DEC 4 : A-FR 5 : A-BW 6 : A-DEC 7 : A-Skew 8 : LNB 9 : DEEM 0/10: DISH Store : PG HID Display TV/SAT Cancel : Last
Source On Screen Favorite

(.) Drive

Tune Up SAT Up SAT Down East West Format
Scan: Mode Format POL CH DN : East : P CH Up : West : P+ Left Right SAT : DBS : C
ANT East ANT West Satellite
SAT Number Audio Up Audio Down East West SAT Name

Run SAT/TV

PPV 3 SPEC 4 SEN 5 CHILD 6 News 7 Music 8 Sports 9 movie 0 Select(View) SAT/TV REC(Time) Clear(Exit) Menu
Auto Tune Store Audio NAR/Wide Audio Mode
Tune Up Tune Down East West Guide
Tuning Mode Tuning Up Tuning Down

Satellite

Enter Mode C/KU NRW Cancel DNR Call < > E W SAT
1 (G) 2 (T) 3 (F) 4 (E) 5 (M) 6 (C) 7 (S) 8 (R) 9 (K) 0 (B) Entet View FAV CNCL Tune Menu CH Up CH Down E Left V Right Call
1G 2T 3F 4E 5M 6C 7S 8R 9K 0B Enter View Scan FAV CNCL Tune Menu CH Up CH Down Left E Right W Call
1G 2T 3F 4A 5W 6K 7C 8B 9S 0X Enter Time Source FAV Cancel ZAP Menu Up Down Left Right SAT
1A 2B 3C 4F 5G 6K 7M 8S 9T 0W Enter Source FAV Cancel
1 Satcom 2 Calaxy 3 Westar 4 Comstar 5 Anik 6 Telstar 7 Spacenet 8 Other 9 Other 0
Reset Satellite Up Satellite Down E W SET

ANT-E W-ANT Select

Menu Up Down Left Right SAT
Antenna East Antenna West Satellite
1 C/KU 2 POL 3 Skip 4 Norm 5 Left Video 6 Video Right 7 Left Skew 8 Skew Right 9 Left Audio 0 Audio Right
1(Satcom) 2(Galaxy) 3(Westar) 4(Comstar) 5(Telstar) 6(Aurora) 7(Spacenet) 8(Intelsat) 9(SBS) 0(ASC) Enter View Skew(Anik) W/N(GSTAR) Cancel Mode(Morelos) Code
1(Satcom) 2(Galaxy) 3(Westar) 4(Comstar) 5(Telstar) 6(Aurora) 7(Spacenet) 8(Intelsat) 9(SBS) 0(ASC) Enter View SAT/TV FAV CNCL Mode(Morelos) Skew(Anik) Fine(Spare) B/W(GSTAR) SAT
Clock F-Tune Up F-Tune Down
Skip Normal Video Left Video Right POL
1 2/PRV 3/SEC 4/SER 5/Child 6/NEWS 7/Music 8/Sport 9/Movie 0 View/Select SAT/TV REC/Time Clear/Exit PREV Menu
Enter POL-PRG TV SAT F/P Cancel FOL+ Format Fine Tune Up Fine Tune Down East West SAT

Enter View Recall/SAT FAV Cancel Menu ADJ+ ADJ

Tuning

Enter Left SAT/TV FAV Cancel Right Format Video Fine Up Video Fine Down East West Next SAT
Enter Recall/SAT FAV Cancel
Enter View Recall/SAT Cancel Menu ADJ+ ADJ

Cancel

ADJ+ ADJ

Enter View Recall/SAT

1G 2T 3F 4E 5M 6C 7S 8R 9K 0B Enter View

Enter C/Ku

Cancel POL/Call C/KU/PROG Skew+ Skew E Left Video Video Right W C/KU/PROG
Skew+ Skew Audio Left Audio Right
Enter Dsplay TV/DSS Favorite Exit Jump Menu Up Down Left Right Guide
1/G 2/T 3/F 4/A 5/W 6/C 7/S 8/M 9/K 0 V Center Recall
Cancel Menu Up down Left Right Select
Mono/D/M Format Audio Select Audio Tune Right Left Audio Tune East West

Mode V/H W/N

Enter View SAT/Tv Buy Next Last, Go Back Menu Up Down Left Right F1
Yes View SAT/TV Buy Help Next Menu

Video Tune Up Tune Down

Skew+ Skew
Enter Display Format Priority Cancel VC Number Fine Tune Up Fine Tune Down E (Satellite) W (Satellite) SAT
Local Up Down Left Right Format
Up down Left Right ON(Green Button)
Secondary Fine Tune Right Fine Tune Left East West Polarity V/H
1/G 2/T 3/F 4/A 5/E 6/K 7/C 8/B 9/S 0/X Enter
Enter Display Source Mode Cancel F/P Letter Fine Tune Up Fine Tune Down East West Number
Store A N/W IN A/B 6.2/6.8 T1 Number Video Up Video Down East West Type
FAC CAN H/V Fine Tune Up Fine Tune Down East West Audio Menu Fine Up Fine Down Peak Left/VC Left Peak Right/VC Right SAT

OEE-0020C

TO THE OWNER
Welcome to the World of Sanyo
Thank you for purchasing the Sanyo Starlight Universal Remote Control. You made an excellent choice for Performance, Reliability, Value, and Styling. The RMT-U200 can replace four separate remote controls. This greatly simplifies the operation of your home entertainment system. This remote control can operate Video Cassette Recorders, Televisions, Cable Converter Boxes, and Satellite Receivers. Simply program it according to the directions in this owners manual. Then press the proper function key (VCR, TV, CABLE, or SAT/AUX) to set the remote control to operate each product. The SAT/AUX mode can be programmed to operate a Satellite Receiver or another VCR, Television, or Cable Box. The RMT-U200 remote control is ergonomically friendly. It offers large Channel, Volume, Power, and Light keys that glow-in-the-dark. It has Function keys that light and a keypad that lights when the Light key or other related key is pressed. The keypad remains lit for a few seconds after releasing the Light key. This allows easy use in a dimly lighted room. Because the associated mode key lights when you press any operating key (channel, volume, number etc.), you always know which component is being controlled. Just observe the mode keys. The one that lights is the answer. The RMT-U200 universal remote control comes with keys that are preset to operate your Video Cassette Recorder, regardless of the mode you have selected. The Caption, V-Guide, and Rec keys have reduced heights to lessen accidental activation.
OPERATING KEYS DESCRIPTIONS

OPERATING KEYS LOCATIONS

The keys on this remote control operate functions similar to those of your o ri ginal remote controls.

VCR Codes Chart

BRAND NAME CODE NO. BRAND NAME CODE NO.
ADMIRAL. 239 AIKO.. 205,240 AIWA.. 217 AKAI. 215 BELL & HOWELL. 203 BROKSONIC. 204,227,234,243 CANDLE.. 204,205,208,211,216,.. 217,222,223,233,240 CANON.. 216,232 CCE.. 205,240 CINERAL.. 205,240 CITIZEN. 205,211,216,217,222.. 233,240 CRAIG.. 202,219,223 CURTIS MATHES. 208,211,216,217,222.. 232,236,238 DAEWOO. 205,211,240 DAYTRON.. 205,240 EMERSON.. 203,204,205,206,210.. 211,217,223,227,234.. 236,240,243,247 FISHER. 201,202,203,211 FUNAI.. 217,228,233 GE.. 208,212,216,222.. 232,236,246 GOLDSTAR.. 206,208,215,217,223.. 226,238 GO VIDEO.. 208,212,213,219.. 248,249 HITACHI.. 209,217,221,222.. 230,246 JBL.. 237 J.C.PENNY. 208,216,219,221,223 JVC.. 203,209,220,221.. 225,226 KEC.. 205,240 KENWOOD. 201,203,226,238 LOGIK.. 219,235 LXI.. 217,228 MAGNAVOX. 204,211,216,217,219.. 220,232 MAGNASONIC. 205,219,223,240 MATSUSHITA. 216 MEMOREX.. 200,202,203,215.. 221,223,224,245 MITSUBISHI. 210,223,231,244 MTC. 217,219,228 MULTITECH.. 217,228 NEC.. 206,208,215,217,223.. 226,238 OPTIMUS.. 208,223,229,245 ORION.. 205, 206,210,211.. 227,234,243 PANASONIC. 202,211,216,219,223.. 232,236,245 PENTAX. 221,238 PHILCO. 204,216,217,228,232 PHILIPS.. 204,211,216,232 PIONEER. 207,242 PROSCAN.. 236,241 PROTON.. 219 PULSAR.. 205, 208,216,217.. 233,240 QUASAR.. 216,223,232,236,245 RADIO SHACK.. 223,245 RCA.. 201,207,208,210,216.. 221,222,232,236,241 REALISTIC. 200,202,208,216,217.. 223,229,232 SAMSUNG. 208,217,222,233 SANSUI. 219 SANYO.. 200,201,202,203 SCOTT.. 211,223,227,234 SEARS.. 200,201,202,203,211 ,.. 216,217,221,223 SHARP.. 224,229,239 SHINTOM.. 219 SIGNATURE 2000.. 200,217,239 SONY.. 214,218,226,237 SYLVANIA.. 204,216,217,228,232 SYMPHONIC. 202,217,226,228,233 TATUNG.. 226 TEAC.. 217 TEKNIKA. 216,217,223 TOMAS.. 217 TOSHIBA. 202,205,210,211,240 WARDS. 202,204,208,211.. 217,223,224,229 WHITE WESTINGHOUSE. 205,240 YAMAHA. 226,238 ZENITH.. 215,222,223,225,228
Mode KeysUse these keys to program the remote control and to select the operating mode (VCR, TV, Cable or Satellite/Auxiliary). Vi d eo/TVVCR KeyIn the TV and Satellite modes, this key selects the p rogram source to display on the screen (TV signal or signal from equipment connected to the A/V jacks). In the VCR mode, this key functions as a VCRs TV/VCR key. This key has no function in the Cable mode. Number KeysUse these keys to directly select channels on your VCR, TV, Cable Converter Box, or Satellite Receiver. Caption KeyPress to select the caption mode: OFF, Caption1, Caption2, Text1, Text2 or Quikcap on a Sanyo TV. V-Guide KeyPress this key to access the TV Parental Guidelines setup menu on a Sanyo TV. It has no function in other modes. Menu/Guide KeyUse this key along with the / and / keys to adjust the features of a Sanyo TV. Use it to display the Satellite Guide in the SAT/AUX mode. Channel ( / ) and Volume ( / ) KeysIn the VCR, TV, and Cable Box modes, press to scan through the channels or to adjust the volume. In the SAT/AUX mode, these keys move the cursor. Mute KeyPress once to turn off the volume. Press again to restore the volume. VCR KeysThese keys control the VCRs Fast Forward (FF), Rewind (REW), Play, Record, Stop, Tracking, and Pause functions. Reset KeyPress this key twice to restore factory settings on a Sanyo TV. It has no function in other modes. Sleep KeyUse this key and the 0 (zero) key to set the Sleep Timer on a Sanyo TV. Press Sleep then 0 to set the amount of time delay. The TV will shut down automatically. Enter KeySatellite operation only. Recall KeyPress to switch between two channels. This key has no function in the Cable mode. Display KeyPress to display the TV channel number on the screen. Light KeyPress to backlight the keypad. Keys will remain lit for a few seconds after releasing the key. 3

BEFORE YOU BEGIN

Install The Batteries
Step 1. Remove the battery cover by pressing the tab and tilting the cover upward. Step 2. Install two AA batteries as shown. Be sure to match the / signs on the bat t e ri s with the e / marks inside the case. Note: Do Not mix new and used batteries or mix different types of batteries together.
IMPORTANT NOTE: SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS. FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.

9 PROGRAMMING THE REMOTE CONTROL
1. Find your equipments brand codes
in the ch a rts on pages 5, 6, and 7. Note: Larger code numbers may represent more recent models. Th e re fo re, if you have late model equipment, we recommend that you try the largest number first.
3. Perform Step 2 for each piece of
equipment you have (VCR, TV, Cable Conve rter Box, and/or Satellite Receiver). After entering a code number check the Power and Channel operation. If these functions operate pro p e rly, programming is complete. If not, try reprogramming using another code, if available. After programming is confi rm e d, enter your codes in the spaces provided below and on the back of the remote control.
VCR CODE TV CODE CABLE BOX CODE SAT/AUX CODE
2. Press and hold the VCR, T V,
CABLE, or S AT/AUX mode key while entering the three-digit code number. The Mode key will flash 5 times if the code was accepted. The VCR, TV and CABLE modes will accept only each modes specific code type. If you enter an invalid code, the Mode key will light, but it will not flash, repeat Step 2. The SAT/AUX mode will accept all code types. 4
Satellite Receiver Codes Chart
BRAND NAME CODE NO. ALPHA STAR.. 431 CHAPARRAL. 408,414,424 ECHOSTAR. 410,413*,416.. 417*,432 EXPRESSVU. 432 FUJITSU. 404 GE.. 419 GEN.INSTRUMENTS. 403*,405.. 415,425.. 427,435 HITACHI. 407,421 HTS. 432 BRAND NAME CODE NO. HUGHES. 407 JANEIL.. 404 JERROLD. 425,427 JVC. 432 MAGNAVOX. 429,430 MEMOREX. 430 PANASONIC. 400,428 PHILIPS. 429,430 PRIMESTAR. 411,425,427 PROSCAN. 419,426 RCA. 419,423.. 426,433 BRAND NAME CODE NO. SONY.. 420 STAR CHOICE.. 435 STS. 402 TOSHIBA. 405,422 UNIDEN. 401,406.. 409,412.. 429,430 VIEWSTAR. 418 VIDEO PALL. 404 ZENITH.. 404,434 *Use Power key on Receiver.

TV Codes Chart

BRAND NAME CODE NO. BRAND NAME..CODE NO.
NIKKO..148 OPTONICA..147 ORION..128,142 PANASONIC.105,107,112,123.124,135,136,139 PENNY.155 PHILCO.101,102,109,111.112,115,117,121.129,133,136,145 PHILIPS.115,121,133 PIONEER..107,108,111,112 PROSCAN..124,138 PROTON.101,102,111,117.124,132,148 PULSAR.101,111,136 QUASAR.107,112,123,135.139,147 RADIO SHACK.100,103,105,107,115.124,130,132,144.147,148 RCA..103,107,108,111.118,120,124,125.126,132,138,155 REALISTIC..144,147,148 RUNCO.153 SAMPO.107,109,111,135 SAMSUNG..101,109,111,120,121.129,132,143,144,148 SANSEI.151 SANYO.100 SCOTCH.148 SCOTT.101,103,105,111.115,116,124,128.131,132,148 SEARS.100,101,115,124.144,148 SHARP.110,129,130,132.134,147 SIGNATURE 2000.130,137 SIMPSON..149 SONY..110,132 SOUNDESIGN.148 SYLVANIA..101,102,109,111.112,115,117,121.133,136,145 SYMPHONIC.104,105 TANDY.145 TATUNG.107 TECHNICS..112,123,135 TECHWOOD.144 TEKNIKA..103,105,109,111.117,132,136,137,144 TELEFUNKEN.144 TMK..144,148 TOSHIBA..120,121,131 VIDTECH.148 WARDS.101,109,111,114,115.117,120,121,124,129.137,144,145,147,148 WHITE WESTINGHOUSE.151,152,154 YAMAHA..109,112,117,134,136 ZENITH.106,114,136,137 ADMIRAL..100,114,115,124.128,129,137 AKAI..101,102,110,122 AOC..101,109,111 AUDIOVOX..105,151 BELL & HOWELL..114,115,129,137 BROKSONIC.101,103,115,119 CANDLE.101,103,109,111.115,117,120,121.132,136,144 CINERAL.151 CITIZEN.121,144 CONCERTO..144 CRAIG.103,105,117,120 CROSLEY..115 CROWN.117,132 CURTIS MATHES..102,109,111,115.120,124,132,137,155 DAEWOO..101,107,109,111.121,132,136,139,.150,151,154 DAYTRON..111,132,136 ELECTROHOME.101,132 EMERSON..101,102,103,104,105.111,112,116,117,120.128,129,132,134,142.148,150,152,154 FISHER.100 FUNAI..103,104,105 GRADIENTE.144 GE..101,103,107,111,118.120,123,124,132,138.148,150,151,155 GOLDSTAR..101,102,106,109,111.112,114,132,133,134.138,144,148 HALLMARK..148 HITACHI.111,123,124,129,132.135,136,141,144,146 JBL..133 J.C.PENNY..101,109,120,123.124,132,155 JVC..120,121,123 KENWOOD..101,102,109,127,134 KTV..103,105,109,111.132,140 LG..144 LOGIK.114,137 LXI..100,101,115,124,148 LUXMAN.144 MAGNASONIC.101,102,129,136 MAGNAVOX.101,102,109,111,112.113,115,117,121,123.129,133,145,149 MEGATRON..148 MEMOREX..100,101,137,144,148 MGA..148 MITSUBISHI.101,102,109,111.122,132,133,148 MTC..101,109,115,120.136,144 NAD..148 NEC..101,102,106,109,111.112,114,132,133,134.138,144,148

Cable Converter Box Codes Chart
ABC.. 304,306,309,312,313. 314,318,322,324 AIM.. 321 ARCHER. 334 CONTEC. 302,305,307,308. 311,318,320,324 CPI.. 319 DIAMOND.. 320 EAGLE. 313 EMERSON.. 334 GEN. INSTRUMENTS. 303,309,311,322,323 GOODMIND.. 334 HAMLIN. 320,330 JERROLD.. 303,308,309,311. 313,319,322,323 MAGNAVOX. 301,322 MEMOREX.. 313,314,332 MOVIE TIME. 306,310,314 NORTHCOAST. 316 NSC.. 305,306,314 OAK.. 305,318,320 PANASONIC. 302,307,317 PARAGON.. 313,314 PHILIPS. 313,314,325,329 PIONEER.. 312,317,333 PROSCAN.. 328 RADIO SHACK. 334 RCA.. 328 REGAL. 320 REMBRANT. 305 SAMSUNG.. 310,312 SCI. ATLANTA. 324,327 SIGNAL. 310 SIGNATURE. 300,322 SPRUCER.. 307,316 STARCOM.. 309,321,322,323,332 STARGATE.. 310,321,334 TOCOM. 300,304,305,306,307 TOSHIBA.. 316,331 TELEVIEW.. 310 UNITED CABLE. 309 UNIKA. 314 U.S. ELECTRONICS. 309,322,324 VIEWSTAR.. 313,315,326 WARDS. 322 WARNER.. 312 ZENITH. 316,331
Special Operating Conditions
The Caption, Menu, Reset, Sleep, and V-Guide keys will operate only Sanyo televisions. The Channel / keys perform the Tracking /+ functions on Sanyo and Fisher brand VCRs. The Display and Mute keys operate the TV regardless of the mode selected. The Vol /+ keys operate TV functions in the VCR, TV, and Cable modes. The Recall and Video keys have no function in the Cable mode. The Enter key is for Satellite operation only. The Vol /+ keys and Channel / keys move the Cursor in the SAT/AUX mode when this mode is programmed to operate a satellite receiver. The Menu key functions as the Guide key in the S AT/AUX mode when this mode is programmed to operate a satellite receiver. Refer to the owners manuals that came with your equipment for specific features operation.
Universal Remote Control Owners Manual

Model RMT-U200

90-DAY LIMITED WARRANTY
THIS LIMITED WA R R A NTY IS VALID ONLY ON SA N YO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA AND PUERTO RICO, HOWEVER, EXCLUDING ITS OTHER T E R R I TORIES AND PROTECTORATES. THIS LIMITED WA R R A NTY APPLIES ONLY TO THE ORIGINAL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. FOR 90 DAYS from the date of purchase, Sanyo Manufacturing Corporation will replace any defective unit without charge to the original purchaser. To ensure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return the defective remote control along with the receipt to the retailer. The defective remote control will be exchanged for the same model, or a replacement model of equal or greater value, if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

CONTENTS

Operating Tips and Troubleshooting Hints
The VCR and TV modes are preprogrammed with Sanyo codes. To operate each product (VCR, TV, Cable Box, or Satellite Receiver), you must first press the proper mode key (VCR, TV, CABLE, or SAT/AUX). The SAT/AUX mode can be programmed to operate a Satellite Receiver or another VCR, TV, or Cable Box. Some manu fa c t u re rs use different types of remote controls. If your brand has several codes listed, p rogram the unit with diffe rent codes until you fi n d the correct one. Larger nu m b e rs may rep resent newer models. Th e re may be VCRs, TVs, Cable Conve rter Boxes, and Satellite Receive rs that this remote control cannot operat e. Some models may operate only partially. Code numbers will remain in memory for five minutes as you replace batteries. Remove batteries from the remote control if it will not be used for a month or more. Weak batteries may leak, causing damage to the remote control. This remote control uses an inv i s i ble (infrared) light beam to operate the equipment. Objects between the equipment and the remote control can block this light beam. Th e re fo re, the remote control must be pointed dire c t ly at the equipment you want to operat e. This remote control cannot add features to your equipment. They must have been originally provided by your equipments manufacturer. If the remote control fails to operate any of your equipment replace the batteries. Be sure batteries are installed correctly.
To The Owner. 2 Install The Batteries. 2 Operating Keys Descriptions. 3 Operating Keys Locations. 4 Programming The Remote Control. 4 VCR Codes Chart. 5 Satellite Receiver Codes Chart. 5 TV Codes Chart. 6 Cable Converter Box Codes Chart. 7 Operating Tips and Troubleshooting Hints. 7 Special Operating Conditions. 8 Warranty. 8

OBLIGATIONS

For 90 days from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from defects in material and workmanship under normal use and conditions. Should replacement be necessary under this warranty for any reason due to manufacturing defect or malfunction during the first 90 days from date of original purchase, Sanyo Manufacturing Corporation will provide a new remote control via exchange at the retailer at no charge. This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary from state to state.
Sanyo Manufacturing Corp. 3333 Sanyo Road, Forrest City, AR 72335 (EFFECTIVE: January 1, 2000)
Printed in U.S.A.: SMC, February 2000 Part Number: 1 J C 6 P 1 P 8 AService Code: 3246