Operating Manual for 2 in 1 Cable TV Remote Control

UR-P95TVE

Instructions
This remote control is preprogrammed to operate CABLE Box. Please program it for your TV by following the instructions shown below.
STEP2 Press [TV POWER] and [MUTE] buttons simultaneously until the red light is on. STEP3 Point the remote control toward the TV and enter the three-digit code from the code table. If there is more than one code number assigned to your TV brand, try one code number at a time until the TV turns off right after you entered the number. Searching Method Press [CH +] button and hold until the TV turns off. As soon as the TV turns off, release [CH+] button. *Tip : You can confirm the power off and on by pressing [MUTE] button. STEP4 Press [TV POWER] button to store the threedigit code.
STEP2 Press [CH +] button. *Tip : Red light will blink twice. The [CATV POWER] button sends out the TV and CABLE power commands if you press the [CATV POWER] button. To return to the original function, press the [CH-] button in the STEP2. B. Recalling the TV Three-digit code : STEP1 Press [TV POWER] and [MUTE] buttons simultaneously until the red light is on. STEP2 Press [VOLUME -] button. The red light will blink a number of times indicating the number of each digit of the code. Each digit is separated by one second interval of red light being off. *Tip : One blink, three blinks and 10 blinks, indicates the code number 130.

Batteries

The remote control uses AAA batteries. Please be sure to match the batteries with the ( + ) and ( -) markings inside the battery compartment during installation.
Install two AAA alkaline batteries as shown here
*Tip : Red light will blink twice. Three-digit code :
Set-up for your VOLUME control
Press arrow gently & pull down to remove cover
The remote control is preprogrammed to control VOLUME and MUTE functions through your TV. To switch VOLUME and MUTE functions to your Cable Box: STEP1 Press [CATV POWER] and [MUTE] buttons simultaneously until red light is on. STEP2 Press [VOLUME +] button. STEP3 Press [CATV POWER] button. To return to the TVs VOLUME, press [TV POWER] button. *Tip : Red light will blink twice. Set-up for advanced functions A. To turn on your TV and Cable at the same time with CATV POWER button: STEP1 Press [CATV POWER] and [0] buttons simultaneously until the red light is on.

Helpful hints

Set-up for your Cable Box The remote control is preprogrammed to control your cable box. If it does not work properly, please set-up the right code by using the three-digit code or searching method. If you have a TV with a remote control, we recommend that you plug its power cord directly into a wall outlet if available (your cable installer may select an alternate setup). Operation If red light does not blink when you press keys the operation is intermittent: Make sure the batteries are inserted correctly. Replace old batteries with two new AAA batteries. Please do not mix old batteries with new ones.
Programming your remote control
Setup for your cable box No setup is required. The remote control is preprogrammed to operate your cable box. Setup for your TV Find your TV brand and its three-digit code on the back of this manual. If the TV brand is not listed, please use the Searching Method in STEP3.
Universal Remote Control, Inc.

www.universalremote.com

OEE-0017C Rev 03(05/14/02)
STEP1 Turn on your TV manually. *Tip : If you have RCA TV, dont turn on the TV.

Three-digit Code Table

Remote UR-P95TVE Converter Pioneer Converter Model Code No BR-95D 009
BRAND NAME ENVISION FISHER FUNAI FUTURETECH GE GOLDSTAR GO VIDEO HALL MARK HARMAN KARDON HITACHI INFINITY INKEL INSTANTREPLAY JBL JCL JCP JCPENNY JENSEN JVC KENWOOD KLOSS KMC KTV LG LLOYD LODGENET LOGIK LUXMAN LXI MAGNAVOX MAGIN MARANTZ MARTA MATSUI MEMOREX

BRAND NAME A MARK ADMIRAL AIWA AKAI AMPRO ANAM AOC AUDIOVOX CANDLE CANON CAPEHART CETRONIC CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO CODE NUMBER (3 DIGIT) LIST 243 DAYTRON DWIN 161 DYNASTY 043 DYNATECH 234 ELECTROHOME 143 EMERSON 242 246
CODE NUMBER (3 DIGIT) LIST 241 242
BRAND NAME MEI METZ MGA MINERVA MITSUBISHI MTC MULTITECH NAD NEC NIKEI ONKING ONWA OPTONICA ORION PANASONIC PENNEY PENTAX PHILCO
CODE NUMBER (3 DIGIT) LIST 234 PHILIPS PILOT 242 PIONEER 070 PORTLAND PROSCAN PROTON 131 QUASAR RADIO SHACK RCA REALISTIC RICO 237 RUNCO 181 SAMPO 220 SAMSUNG 235 SANYO SCOTT SEARS 242
BRAND NAME CODE NUMBER (3 DIGIT) LIST SELECO 189 SHARP SIGNATURE SONY 237 SOUNDESIGN 234 SPECTRICON 112 SSS SUPRE MACY 002 SYLVANIA SYMPHONICS TANDY TATUNG 209 TEAC 234 TECHNICS TECHWOOD 004 TEKNIKA TELERENT 072 TERA 172 TMK 004 TOSHIBA TOTEVISION 242 UNIVERSAL UNITECH 235 VIDEO CONCEPTS VIDEOSONIC 235 VIDIKRON VIDTECH 004 WESTING HOUSE 076 WARDS 235 YAMAHA 234 YORK 004 YUPITERU 043 ZENITH ZONDA 112