Reviews & Opinions
Independent and trusted. Read before buy US Robotics USR5451!

US Robotics USR5451

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
US Robotics USR5451 - Installation Guide, size: 1.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

US Robotics USR5451About US Robotics USR5451
Here you can find all about US Robotics USR5451 like manual and other informations. For example: review.

US Robotics USR5451 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a US Robotics USR5451 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your US Robotics USR5451 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
Waag.org 12:20pm on Monday, August 23rd, 2010 
I love this router. I used to have a DLink an... I have the latest firmware update but just going into the ADMIN screen to a MAC address add...
randalldb 4:35pm on Tuesday, July 6th, 2010 
As I mentioned above...have used this router ...  Has excellent range and solid features. Terrible, regularly drops connections.  None.
momodoass 4:25am on Saturday, May 8th, 2010 
I was in a hurray and bought this a a brick and mortar store. After it died I ordered an Encore ENUWI-G from Newegg.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Wireless MAXg Access Point
Installation Guide Guide d'installation Installationsanleitung Guida all'installazione rapida Gua breve de instalacin Beknopte installatiegids
R24.0573.00 Rev 1.0 12/05

Table of Contents

English....1 Franais.... 9 Deutsch.... 17 Italiano....25 Espaol....33 Nederlands...41

English

U.S. Robotics Wireless MAXg Access Point Installation
Package Contents: USR5451 Wireless MAXg Access Point 5VDC power supply Quick Installation Guide One (1) Ethernet cable Installation CD-ROM which includes User Guide Detachable antenna

Prepare for installation

You must have administrator rights on your computer in order to install this product. Be sure to find out what letter your CD-ROM drive uses before you begin installing your new product. You will need to know this to properly install your software.
Connecting the Wireless MAXg Access Point
Note: For the most updated information, visit: http://www.usr.com/support You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed information.
Step One: Connect the Wireless MAXg Access Point
Note: Look at the label on the bottom of the Wireless MAXg Access Point and write down the LAN MAC address listed before you physically place the access point. You will need this for future reference. A. B. C. Connect the supplied Ethernet cable to the LAN port of the Wireless MAXg Access Point and to the LAN port of a networking device with routing capabilities, such as a router. Connect the antenna to the Wireless MAXg Access Point. Connect the power adapter to the Wireless MAXg Access Point and to a standard wall power outlet. Note to UK Users: Attach the correct power plug to the power adapter.

computer

Step Two: Install your software
Note: U.S. Robotics recommends that you configure the Wireless MAXg Access Point using an Ethernet connection. This will ensure the configuration changes are made without modifying the properties of any wireless cards in your network. Note: This is a Windows-based installation. Non-Windows users should refer to I am using I am using an operating system other than Windows and need to configure the Wireless MAXg Access Point on page 6 for information regarding installation on other operating system platforms Insert your U.S. Robotics Installation CD-ROM into the CD-ROM drive of a computer connected to the same networking device that the Wireless MAXg Access Point is connected to. Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type D:\setup (or the appropriate letter of your CD-ROM drive) and click OK. The Installation CD Graphic User Interface (GUI) will appear on your screen. If prompted, select your preferred language. You will be asked to read the license agreement. Read the agreement and click Yes. Click Setup. Follow the on-screen instructions to install and launch the Detection Utility.
Step Three: Configure the Wireless MAXg Access Point
Click Next when the Detection Utility launches. If you have multiple network adapters connected to the computer on which you are running the Detection Utility, you will need to select the adapter that is connected to the access point's network. Click Next. After the devices on your network are detected, determine which is your access point by matching the LAN MAC addresses. The LAN MAC address of the access point is located on the label on the bottom of the access point. If you do not see the LAN MAC address for your access point, make sure it is connected properly and click Detect to scan your network again. Select the LAN MAC address for your access point and click Next.
On the final screen of the Detection Utility, write down the IP address that is listed for your access point. You can use this address at a later time to directly access the Web User Inter-
face. Click Finish to launch the Web User Interface in a new browser window and exit the Detection Utility. Click Start to begin the Setup Wizard procedure.
Follow the on-screen instructions in the Setup Wizard to configure the basic connection settings of the Wireless MAXg Access Point. For more detailed Setup Wizard instructions, refer to the Installation section of the User Guide on the Installation CD-ROM.
Congratulations! You have finished installing your hardware and the necessary software.

You must configure your wireless network adapters to match the settings of the access point. You should now be able to connect your wireless network adapters to the Wireless MAXg Access Point. For troubleshooting and technical support information, refer to the Troubleshooting section of this Guide or to the User Guide on the U.S. Robotics Installation CD-ROM. Note: After you have completed the installation and configuration procedures, U.S. Robotics recommends that you create a backup file of your settings in case you ever experience some difficulties and want to restore your settings. Perform the following steps: 1. 2. 3. Launch a Web browser and access the Web User Interface. You will be prompted to enter your user name and password. After entering your user name and password, the Web User Interface will open. Click the Device tab and then click Back Up in the Back Up Settings section. Refer to the User Guide on the Installation CD-ROM for more information about this feature.

Reset Procedure

If you need to restore the factory default settings of the Wireless MAXg Access Point at any time, press in and hold the RESET button for between five and ten seconds.
Warning: If you restore the factory default settings, the Wireless MAXg Access Point will lose any custom settings.

Register your product

Register your product online at http://www.usr.com/productreg

Troubleshooting

I am unable to communicate with the Wireless MAXg Access Point.
Possible Solution: Be certain that you have each Wireless MAXg PC Card, PCI Adapter, or USB Adapter set to Infrastructure mode. Verify that you are using the same Network Name (SSID) and Security information as the Wireless MAXg Access Point. Refer to your Wireless PC Cards, PCI Adapters, or USB Adapters documentation to determine how to change these settings. Possible Solution: Your Wireless MAXg Access Point may not have received a valid IP address for your network. If the IP address is set to Dynamic, make sure you have your Wireless MAXg Access Point connected to a DHCP server. If it is not connected to a DHCP server, your Wireless MAXg Access Point will not receive an IP address and you will not be able to connect to it. If you use a static IP address, verify that it is in the same subnet as your computers IP address. Refer to the LAN chapter of the Web User Interface section in the User Guide for more information about changing the IP address. Possible Solution: Your Wireless MAXg Access Point may not be responding. Try unplugging the power supply and then plugging it back in to reboot the Wireless MAXg Access Point. Possible Solution: Your Wireless MAXg Access Point may not be responding. Try restoring the factory default settings of the Wireless MAXg Access Point to reactivate it. If you restore the factory default settings, the Wireless MAXg Access Point will lose any custom settings. Press in and hold the RESET button for between five and ten seconds. If you made any personal configuration settings, you will need to make the changes again or restore your settings if you created a backup file.

The Wireless MAXg Access Point Detection Utility is not locating the correct Access Point.
Possible Solution: Verify that all the physical connections of the access point are securely connected. Possible Solution: If the Detection Utility does not locate the correct access point, click Detect to rescan the network. Possible Solution: If the correct access point is not located after you click Detect, perform the following steps: 1. The networking device that the access point is connected to probably has some form of Web User Interface where you can view a client list. Refer to your networking device's documentation to determine how to view this information. When you find the client list, locate the access point by verifying the MAC address that is on the bottom label of the access point and what is listed. Write down the IP address of the access point for future reference.
Launch a Web browser, type in the IP address of the access point, and then press Enter. This will open the Web User Interface of the access point. Verify that all the connection information is correct for the network to which the access point is connected. If you cannot connect to the access point, make sure all the connections are secure and correct.
My Wireless MAXg Access Point is not appearing when I scan for it with a wireless adapter.
Possible Solution: You may be on a computer that is physically too far away from the Wireless MAXg Access Point. Try moving closer to the Wireless MAXg Access Point and repeating the scan procedure. Possible Solution: Connect your computer to the Wireless MAXg Access Point using a network cable. Open the Web User Interface of the access point, click the Wireless tab, and make sure the Broadcast network name checkbox is selected. If the Network name is not being broadcast, the access point will not appear during a site survey scan. Disconnect the network cable and scan for the Wireless MAXg Access Point.
My Wireless MAXg Access Points Web User Interface is not responding, but I can still access the Internet.
Possible Solution: In your Web browser, make sure you are entering the correct IP address of the access point. Possible Solution: If your Web User Interface stops responding, unplug and then plug back in the power supply of the Wireless MAXg Access Point. This will reboot the Wireless MAXg Access Point. Possible Solution: If you are still unable to communicate with the Web User Interface, press in and hold the RESET button for five to ten seconds. This will reset the Wireless MAXg Access Point to the factory default settings. If you made any personal configuration settings, you will need to make the changes again or restore your settings if you created a backup file.

My computer does not establish a wireless connection to the Wireless MAXg Access Point after I changed the settings.
Possible Solution: In the configuration utility for your wireless card or adapter, ensure that you are connecting to the correct Wireless MAXg Access Point by verifying the WLAN MAC address. The WLAN MAC address is located on the label on the bottom of the Wireless MAXg Access Point. Ensure that the correct Pass phrase and encryption option are being used. If you changed the settings in the configuration of the Wireless MAXg Access Point, you must also change the settings of every Wireless PC Card, PCI Adapter, or USB Adapter attached to this network. The settings of the Wireless PC Cards, PCI Adapters, or USB Adapters must match the new settings of the Wireless MAXg Access Point.
I am experiencing poor wireless link quality.
Possible Solution: Low link quality or range can be caused by environmental interference, such as lead-based paint and concrete walls. Try to move the antenna of the Wireless MAXg Access Point or to reposition the wireless clients to improve the link quality. Possible Solution: Some electronic items, such as 2.4Ghz phones, may interfere with the wireless signal and affect your wireless range and link quality. Try creating a wireless connection on a different channel. Refer to the Wireless area in the Web User Interface section of the User Guide for more information regarding changing your wireless settings.
The installation procedure did not begin when I inserted the Installation CD-ROM.
Possible Solution: Some programs may keep the autolaunch feature of the Installation CD-ROM from beginning. Close any open applications and reinsert the Installation CD-ROM.
The Wireless MAXg Access Point is not receiving any power.
Possible Solution: Make sure the power supply of the Wireless MAXg Access Point is connected to the power jack on the Access Point and to a standard power outlet.
I am using an operating system other than Windows and need to configure the Wireless MAXg Access Point.

Possible Solution: The Wireless MAXg Access Point uses a Windows-based installation. Users of non-Windows operating systems should perform the following steps to configure the access point. 1. The networking device that the access point is connected to probably has some form of Web User Interface where you can view a client list. Refer to your networking device's documentation to determine how to view this information. When you find the client list, locate the access point by verifying the LAN MAC address that is on the bottom label of the access point and what is listed. Write down the IP address of the access point for future reference. Launch a Web browser, type in the IP address of the access point, and then press Enter. This will open the Web User Interface of the access point. Verify that all the connection information is correct for the network to which the access point is connected. If you cannot connect to the access point, make sure all the connections are secure and correct.

Additional Support

Note: Your model number is 5451. You can find your serial number on the bottom label of the Wireless MAXg Access Point and on the side of the package. Write your serial number down. If you ever need to call our Technical Support department, you will need this number to receive assistance. Go to the User Guide on the Installation CD-ROM. More configuration and advanced troubleshooting information is available in the User Guide on the Installation CD-ROM. 2. Go to the Support section of the U.S Robotics Web site at www.usr.com Many of the most common difficulties users experience have been addressed in the FAQ and Troubleshooting Web pages for your specific product. 3. Submit your technical support question using an online form at http://www.usr.com/ emailsupport 4. Call the U.S. Robotics Technical Support department. Technical questions about U.S. Robotics products can also be answered by technical support specialists.
Country Voice United States & Canada (888) 216-2850 Austria Belgium (Flemish) Belgium (French) Czech Republic Denmark Finland France Germany Hungary Ireland Italy Luxembourg Middle East/Africa Netherlands Norway Poland Portugal Russia Spain Sweden Switzerland Turkey UAE UK +116 ++Online http://www.usr.com/emailsupport Support Hours 8:00 A.M. - 6:00 P.M., M-F Central 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 09:00 17:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 09:00 17:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 10:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 08:00 18:00, M-F 12:00-22:00 M-F 08:00 18:00, M-F
http://www.usr.com/emailsupport/de http://www.usr.com/emailsupport/bn http://www.usr.com/emailsupport/be http://www.usr.com/emailsupport/cz +http://www.usr.com/emailsupport/ea +http://www.usr.com/emailsupport/ea +http://www.usr.com/emailsupport/fr +http://www.usr.com/emailsupport/de +http://www.usr.com/emailsupport/hu +http://www.usr.com/emailsupport/uk +http://www.usr.com/emailsupport/it +http://www.usr.com/emailsupport/be +http://www.usr.com/emailsupport/me +31 (0) 5857 http://www.usr.com/emailsupport/bn +http://www.usr.com/emailsupport/ea http://www.usr.com/emailsupport/pl +351 (0) 4034 http://www.usr.com/emailsupport/pt +http://www.usr.com/emailsupport/ru +http://www.usr.com/emailsupport/es +46 (0) 1020 http://www.usr.com/emailsupport/ea +http://www.usr.com/emailsupport/de http://www.usr.com/emailsupport/tk +http://www.usr.com/emailsupport/me +http://www.usr.com/emailsupport/uk

 

Tags

HTR-5140 AR-M236 M276 PC4020CF Panasonic P50 Photo MHC-RXD9 Hitman CU-3E23cbpg Uc 200B Sonar 5 Strg3 Edition AUB 3 Erca70 Hdcsd60 FAV80850S DMP-BD601 PDP-4280XD Astra Slim MX3ST Rally 2 STR-DA4300ES KDL-V32a12U XM-404EQX LE32B650t2pxxc CDX-F5500X RT124 PS-350 C V Plus Arrow Comfort GC4430-02 SGH-U700W Honeywell T87F Touch ME-20 Access OS5 Mediahome 4 802C II DMR-EH595 P3650 KRF-X9050D CCD-TRV57E 1380MF Nokia 5700 XL1600 Professional Autopilot Afipr LE22A455c1D Wamba HD Asus W1J FL1084 Ericsson R600 W302C 82410 GL300 Standard WS700 Rx-5060 FW-P75 GTO2000 KV27HSR10 Sagem C110 Strv55 Primo BM1 DMR-EX80S DSC-S2100 IC-91A W2606C Psae2 CML519W Filter YH-925 KX-F110 BMW 318 ZR-5800 Spectra Review CDA-9827 KCE-350BT LQ-590K Gigaset A140 LG-510W Lexmark P706 EW1290W LN19R81B F250-2004 Faxphone 17A Version 2 E-2004 604-8G Festina 6433 HP 6500 FJ1200SC Satellite 1670 Marine VPC-HD2EX Profiset 3030 EWS-1500 DTB-B460F

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101