US Robotics USR5462
Here you can find all about US Robotics USR5462 like manual and other informations. For example: review.
US Robotics USR5462 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a US Robotics USR5462 please write about it to help other people. [ Report abuse or wrong photo | Share your US Robotics USR5462 photo ]
US Robotics USR5462, size: 1.2 MB
US Robotics USR5462 Installation Guide
US Robotics USR5462
User reviews and opinions
|Christmas||11:13am on Sunday, October 17th, 2010|
|I have the latest firmware update but just going into the ADMIN screen to a MAC address add...|
|FrankVdb||12:01am on Saturday, August 7th, 2010|
|Definitely use a USB extension cable if you are using this on a laptop... I moved my computer while I was working on it and ran into the adapter while it was in a USB port. It bent about 15 degrees.|
|Feardorcha||2:53am on Sunday, May 16th, 2010|
|Wireless Router The US Robotics Wireless Router was very easy to install and set up. For the price, it was a great buy.|
|cohen||6:02pm on Tuesday, March 16th, 2010|
|As I mentioned above...have used this router ... Has excellent range and solid features. Terrible, regularly drops connections. None. I love this router. I used to have a DLink an...|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
U.S. Robotics 802.11g 54Mbps Router
rev 1.0 9-04 R24.0769.00
Trademarks: Other product and company names are trademarks or registered trademarks of their respective holders.
TABLE OF CONTENTS
About the 802.11g 54Mbps Router. 1
LED Indicators. 1 Front and Rear Panels. 2 System Requirements. 3
Installing the 802.11g 54Mbps Router. 4
Basic Installation Procedure. 4
Configuring the 802.11g 54Mbps Router. 9
Navigating the Web Browser Interface. 9 Making Configuration Changes. 10 Setup Wizard. 11 Time Zone. 11 Broadband Type. 12 Advanced Setup. 17 System. 18 WAN. 22 LAN. 28 Wireless. 29 WDS (Wireless Distribution System). 36 NAT - Network Address Translation. 38 Firewall. 42 DDNS (Dynamic DNS) Settings. 50 UPnP (Universal Plug and Play) Setting. 51 Tools. 53 Status. 56
Regulatory and Warranty. 67
ABOUT THE 802.11g 54Mbps Router
Congratulations on your purchase of the 802.11g 54Mbps Router. U.S. Robotics is proud to provide you with a powerful yet simple communication device for connecting your home network or local area network (LAN) to the Internet.
The 802.11g 54Mbps Router includes status LED indicators, as described in the following figure and table.
802.11g 54Mbps Router
The 802.11g 54Mbps Router is receiving power.
The 802.11g 54Mbps Router has established a valid wireless connection. The WLAN port is transmitting or receiving traffic. The WAN port has established a valid network connection.
The indicated LAN port has established a valid 100 Mbps network connection. The indicated LAN port is transmitting or receiving traffic.
About the 802.11g 54Mbps Router
The indicated LAN port has established a valid 10 Mbps network connection. The indicated LAN port is transmitting or receiving traffic.
Front and Rear Panels
The following figure shows the components of the 802.11g 54Mbps Router: Figure 1. Front and Rear Panels
LEDs Power Inlet
Power, WLAN, WAN and LAN port status indicators. (See LED Indicators on page 1.) Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage your router.
WAN port (RJ-45). Connect your cable modem, DSL modem, or an Ethernet router to this port.
Use this button to reset the power and restore the default factory settings. Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub or switch) on your local area network to these ports.
You must have an ISP that meets the following minimum requirements: Internet access from your local telephone company or Internet Service Provider (ISP) using a DSL modem or cable modem. A computer equipped with a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet converter. TCP/IP network protocol installed on each PC that needs to access the Internet. A web browser, such as Microsoft Internet Explorer 5.5 or above installed on one PC at your site for configuring the 802.11g 54Mbps Router.
Installing the 802.11g 54Mbps Router
INSTALLING THE 802.11g 54Mbps
Basic Installation Procedure Note: It is important that you have your serial number written down before you install the 802.11g 54Mbps Router. You can find your serial number on the bottom label of the 802.11g 54Mbps Router. If you ever need to call our Technical Support department, you will need this number to receive assistance.
Model Number USR5462 Serial Number
Note: Be sure to find out what letter your CD-ROM drive uses before you begin installing your new product. You will need to know this to properly install your software.
Step One: Connect your modem to the 802.11g 54Mbps Router
Turn off your computer and your cable or DSL modem. Locate the Ethernet cable from your cable or DSL modem that is connected to your computers Ethernet adapter. If your broadband is connected, disconnect that Ethernet cable from your computers Ethernet adapter. Use the Ethernet cable to connect your cable or DSL modem to the WAN port on the rear of the 802.11g 54Mbps Router.
Note: Some cable or DSL modems can be connected using either a USB cable or an Ethernet cable. To connect your cable or DSL modem to the 802.11g 54Mbps Router, you must use an Ethernet cable.
Step Two: Connect your 802.11g 54Mbps Router to your computer and connect the power supply Connect one end of the supplied Ethernet cable to your computers Ethernet adapter. Connect the other end to one of the LAN ports on the 802.11g 54Mbps Router.
Configuring the 802.11g 54Mbps Router
CONFIGURING THE 802.11G 54MBPS ROUTER
The 802.11g 54Mbps Router can be configured by Windows Internet Explorer 5.5 or above. Using the Web User Interface, you can configure the 802.11g 54Mbps Router and view statistics to monitor network activity. Before you attempt to log into the web-based administration, please verify the following. 1. Your browser is configured properly (see below). 2. Disable any firewall or security software that may be running. 3. Confirm that the cable is securely plugged into your computer and the 802.11g 54Mbps Router (ports 1-4). 4. Make sure that the LED that corresponds with the port you are using is lit green. If you dont have a link light, then try another cable until you get a good link.
Navigating the Web Browser Interface
To access the 802.11g 54Mbps Routers user interface, enter the 802.11g 54Mbps Router IP address in your web browser http:// 192.168.2.1 Then enter the password and click LOGIN. (The default password is admin.) Note: Passwords can contain from 3 to 12 alphanumeric characters and are case sensitive.
The home page displays the Setup Wizard and Advanced Setup options.
The 802.11g 54Mbps Routers user interface features a Setup Wizard and an Advanced Setup section. Use the Setup Wizard if you want to quickly set up the 802.11g 54Mbps Router for use with a cable modem or DSL modem. Advanced setup supports more advanced functions like hacker attack detection, IP and MAC address filtering, intrusion detection, virtual server setup, virtual DMZ hosts, and other advanced functions.
Making Configuration Changes
Configurable parameters have a dialog box or a drop-down list. Once a configuration change has been made on a page, be sure to click the APPLY or NEXT button at the bottom of the page to enable the new setting.
Click on the Setup Wizard picture. The first item in the Setup Wizard is Time Zone setup.
For accurate timing of client filtering and log events, you need to set the time zone. Select your time zone from the drop-down list, and click NEXT.
Select the type of broadband connection you have. Note: If you have any questions regarding what type of service you have, check with your Internet Service Provider for more information.
For a cable modem connection see the following page. For a Fixed-IP xDSL connection see Fixed-IP xDSL on page 13, for a PPPoE xDSL connection, see PPPoE xDSL on page 14, for a PPTP connection, see Point-to-Point Tunneling Protocol (PPTP) on page 15, and for BigPond connection, see BigPond on page 16.
Cable Modem or xDSL Router Your Internet Service Provider may have given you a host name. If so, enter it into the field.
Your connection may require you to clone your MAC address. If required, enter the MAC address of the network adapter that was used to setup your cable connection. Then click Clone MAC address. Click Finish to complete the setup. The Status page will be displayed, allowing you to view the connection status, as well as other information. See Status on page 56 for details. Fixed-IP xDSL
Some xDSL Internet Service Providers may assign a fixed (static) IP address. If you have been provided with this information, choose this option and enter the assigned IP address, Subnet Mask, Gateway IP Address, and DNS IP address. Click Finish to complete the setup.
Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some service providers. Leave the Maximum Transmission Unit (MTU) at the default value (1454) unless your service provider has specified otherwise. Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 0) Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again. Click Finish to complete the setup.
Point-to-Point Tunneling Protocol (PPTP)
Point-to-Point Tunneling Protocol is a connection method used for xDSL connections in Europe. It can be used to join different physical networks using the Internet as an intermediary. If you have been provided with the information as shown on the screen, enter the PPTP Account name and password, Host Name, Service IP Address, the assigned IP Address, and Subnet Mask. Leave the Maximum Transmission Unit (MTU) at the default value (1460) unless your service provider has specified otherwise. Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 10) Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again. Click Finish to complete the setup.
If you use the BigPond Internet Service which is available in Australia, enter the User Name, Password and Authentication Service Name for BigPond authentication. Click Finish to complete the setup.
Use the Web User Interface to define system parameters, manage and control the 802.11g 54Mbps Router and its ports, or monitor network conditions. The following table outlines the selections available from this program.
Sets the local time zone, the password for administrator access, system log server, and the IP address of a PC that will be allowed to manage the 802.11g 54Mbps Router remotely. Specifies the Internet connection type: (1) Dynamic IP, (2) PPPoE configuration, (3) PPTP, (4) Static IP and ISP gateway address, or (5) BigPond (Internet service available in Australia). Specifies DNS servers to use for domain name resolution. Sets the TCP/IP configuration of the 802.11g 54Mbps Routers LAN interface and all DHCP clients. Configures the radio frequency, SSID, WPA/WEP encryption, and 802.1x for wireless communications. Shares a single ISP account with multiple users, sets up virtual servers. Configures a variety of security and specialized functions, including: Access Control, Hacker Prevention, and DMZ. Dynamic DNS provides users on the Internet with a method to tie their domain name to a computer or server. With Universal Plug and Play, a device can automatically join a network, obtain an IP address, communicate its capabilities, and learn about the presence and capabilities of other devices. Devices can then directly communicate with each other. This further enables peer-to-peer networking. Contains options to back up and restore the current configuration, restore all configuration settings to the factory defaults, update system firmware, or reset the system. Provides WAN connection type and status, firmware and hardware version numbers, system IP settings, as well as DHCP, NAT, and Firewall information. Displays the number of attached clients, the firmware versions, the physical MAC address for each media interface, and the hardware version and serial number. Shows the security and DHCP client log.
LAN Wireless NAT Firewall DDNS UPnP
Configuring the 802.11g 54Mbps Router System
Set the time zone and time server for the 802.11g 54Mbps Router. This information is used for log entries and client access control. Set your local time zone settings
Select your time zone from the drop-down list, and set the start and end dates if your area requires daylight savings. To automatically update the 802.11g 54Mbps Routers internal clock by synchronizing with a public time server over the Internet, choose one of the methods below. Get date and time from online time servers (Network Time Protocol)
Choose the online standard time server for your area from the drop-down menu, or enter the IP address of the time server on your network. Set date and time using the PC's date and time
Click on the radio button for synchronizing the 802.11g 54Mbps Routers internal clock with the host PC.
Set date and time manually
For manually setting the date and time, configure the date by selecting the options from the drop-down list, and enter the digits for the time.
Use this menu to restrict access based on a password. For security you should assign your own password before exposing the 802.11g 54Mbps Router to the Internet. (Default: admin) Passwords can contain from 3 to 12 alphanumeric characters and are case sensitive. Note: If your password is lost, or you cannot gain access to the user interface, press the Reset button on the rear panel (holding it down for at least five seconds) to restore the factory defaults.
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum idle time, it will perform system logout, and you have to log into the web user system again. (Default: 9 minutes)
Remote Management allows a remote PC to configure, manage, and monitor the 802.11g 54Mbps Router using a standard web browser. Check Enable and set the IP address or IP address range of the remote host. Click APPLY. (Default: Disable) Note: If you select Any IP Address in the Allow Access to field, any host can manage the 802.11g 54Mbps Router.
The Syslog Server downloads the 802.11g 54Mbps Routers log file to the server with the IP address specified on this screen. (Default: Disabled)
Configuring the 802.11g 54Mbps Router WAN
Specify the WAN connection type provided by your Internet Service Provider, then click More Configuration to enter detailed configuration parameters for the selected connection type. Dynamic IP
The Host Name is optional, but may be required by some ISPs. The default MAC address is set to the WANs physical interface on the 802.11g 54Mbps Router. Use this address when registering for Internet service, and do not change it unless required by your ISP. If your ISP used the MAC address of an Ethernet adapter as an identifier when first setting up your broadband account, only connect the PC with the registered MAC address to the 802.11g 54Mbps Router and click the Clone MAC Address button. This will replace the current 802.11g 54Mbps Router MAC address with the already registered Ethernet adapter MAC address. If you are unsure of which PC was originally set up by the broadband technician, call your ISP and request that they register a new MAC address for your account. Register the default MAC address of the 802.11g 54Mbps Router.
Point-to-Point Over Ethernet (PPPoE)
Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some service providers. The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1454) unless your service provider has specified otherwise. Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 10 minutes) Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again.
Point-to-Point Tunneling Protocol (PPTP) can be used to join different physical networks using the Internet as an intermediary. Using the above screen allows client PCs to establish a normal PPTP session and provides hassle-free configuration of the PPTP client on each client PC. Enter the PPTP Account, Password, Host Name, and then Service IP Address (usually supplied by your ISP), the assigned IP address, and subnet mask. Leave the Maximum Transmission Unit (MTU) at the default value (1460) unless your service provider has specified otherwise. Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the PPTP connection is maintained during inactivity. If the connection is inactive for longer than the Maximum
Idle Time, it will be dropped. (Default: 0 minutes) Static IP
If your Internet Service Provider has assigned a fixed IP address, enter the assigned address and subnet mask for the 802.11g 54Mbps Router, then enter the gateway address of your ISP. You may need a fixed address if you want to provide Internet services, such as a web server or FTP server.
BigPond is a service provider in Australia that uses a heartbeat system to maintain the Internet connection. Configure the built-in client with your user name, password and service name to get on line.
Domain Name Servers map numerical IP addresses to the equivalent domain name (e.g., www.usr.com). Your ISP should provide the IP address of one or more domain name servers. Enter those addresses in this screen.
Configuring the 802.11g 54Mbps Router LAN
LAN IP Use the LAN menu to configure the LAN IP address for the 802.11g 54Mbps Router and to enable the DHCP server for dynamic client address allocation. Set a period for the lease time if required. For home networks this may be set to Forever, which means there is no time limit on the IP address lease. IP Address Pool A dynamic IP address range may be specified (192.168.2.2254). IP addresses running from 192.168.2.100199 are the default values. Once the IP addresses, e.g. 192.168.2.100199, have been assigned, these IP addresses will be part of the dynamic IP address pool. IP addresses from 192.168.2.299, and 192.168.2.200254 will be available as static IP addresses.
Remember not to include the address of the 802.11g 54Mbps Router in the client address pool. Also remember to configure your client PCs for dynamic IP address allocation.
Advanced Setup Wireless
To configure the 802.11g 54Mbps Router as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Service Set Identifier (SSID), and encryption options. Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to be used by the 802.11g 54Mbps Router and all of your wireless clients. Be sure you configure all of your clients to the same values.
Network Name (SSID): The Service Set ID. This should be set to the same value as the other wireless devices in your network. (Default: USR5462)
Note: The SSID is case sensitive and can consist of up to 32 alphanumeric characters.
SSID Broadcast: Broadcasting the SSID on the wireless network for easy connection with client PCs. For security reasons, disable SSID broadcast. (Default: Enable)
Note: If you disable SSID, it will not show up in your site survey and in order to connect to it, a manual profile will have to be created. Refer to the Navigating the Wireless Configuration Utility section of the 802.11g 54Mbps USB Adapter User Guide on the Installation CD-ROM.
Wireless Mode: Set the communication mode for the 802.11g 54Mbps Router. (Default: Long Range Mixed (11b+11g))
The Long Range Mixed (11b+11g) is an enhanced operation mode. The 802.11g standards combines the IEEE 802.11a speed with 54 Mbps. It provides a long range wireless connectivity of 100 m (328 feet) associated with the IEEE 802.11b standards by offering faster speeds and longer distances from a wireless access point to a wireless PC card.
54g+: 54g+ is a technology that utilizes standards based on framebursting to achieve higher throughput. With 54g+ enabled, aggregate throughput (the sum of the individual throughput speeds of each client on the network) can improve by up to 25% in 802.11g only networks and up to 75% in mixed networks comprised of 802.11g and 802.11b equipment.(Default: Enable) Transmission Rate: Set the rate of data transmitted from
the 802.11g 54Mbps Router. The lower the data rate, the longer the transmission distance. (Default: Auto)
Channel: The radio channel through which the 802.11g 54Mbps Router communicates with PCs in its BSS. (Default: 11)
Note: The available channel settings are limited by local regulations.
If you are transmitting sensitive data across wireless channels, you should enable Wi-Fi Protected Access (WPA) or Wired Equivalent Privacy (WEP) encryption. Encryption security requires you to use the same protocol set (WPA or WEP) and encryption/decryption keys for the 802.11g 54Mbps Router and all of your wireless clients. For a more secure network, the 802.11g 54Mbps Router can implement one or a combination of the following security mechanisms: Wi-Fi Protected Access (WPA) Wired Equivalent Privacy (WEP) page 33 page 34
The security mechanisms that may be employed depend on the level of security required, the network and management resources available, and the software support provided on wireless clients. A
summary of wireless security considerations is listed in the following table.
Security Client Mechanism Support
WEP Built-in support on all 802.11b and 802.11g devices
Provides only common security Requires manual key management
Requires WPA-enabled Provides good security in small system and protocol networks driver for network Requires configured RADIUS server, adapter or manual management of pre-shared key (native support provided in Windows XP) 802.1x mode Provides robust security in WPA-only mode (i.e., WPA clients only) Requires WPA-enabled Requires configured RADIUS server system and network adapter driver 802.1x Extensible Authentication Protocol (EAP) type may require (native support provided management of digital certificates for in Windows XP) clients and server
WPA Encryption Type
WPA is a stronger wireless security solution than WEP. It uses a combination of 802.1x authentication and broadcast/session keys. Pre-Shared Key/Passphrase
If there is no authentication server on your SOHO network, you can issue the Pre-Shared Key to the clients that connect to the 802.11g 54Mbps Router. Be sure to use the same key for the 802.11g 54Mbps Router and the connected clients. Notes: 1. Manual Pre-Shared Key supports up to 64-Hex characters. 2. Type 8~63 Hex characters for the Pre-Shared Passphrase. 3. Do not use a key that is long and complex for your clients to type accurately. 4. A Hex (hexadecimal) digit is a number or letter in the range 0-9 or A-F. 802.1X Mode
The 802.11g 54Mbps Router allows you to use 802.1x authentication for an enterprise network environment with a RADIUS server installed. In 802.1x mode, access will be checked against the authentication database stored on the 802.11g 54Mbps Router. You must specify the authentication period, and the corresponding parameters in the RADIUS Server Parameters field for the remote authentication protocol.
WEP Encryption Type
You can choose between standard 40-bit/64-bit or the more robust 128-bit encryption. You may manually enter the keys or automatically generate encryption keys. To manually configure the keys, enter five hexadecimal pairs for each 40/64-bit key, or enter 13 pairs for the single 128-bit key. For automatic 64-bit security, enter a passphrase and click Generate. Four keys will be generated (as shown below). Choose a key from the drop-down list or accept the default key. Automatic 128-bit security generates a single key. (Default: Open) Note: Active ASCII keys must be exactly 5 characters for 40/ 64-bit WEP. Active ASCII keys must be exactly 13 characters for 128-bit WEP.
URL Blocking To configure the URL Blocking feature, use the table below to specify the web sites (for example, www.somesite.com) and/or keywords you want to filter on your network. To complete this configuration, you will need to create or modify an access rule in Access Control on page 42. To modify an existing rule, click the Edit option next to the rule you want to modify. To create a new rule, click the Add PC option. From the Access Control Add PC section check the option for WWW with URL Blocking in the Client PC Service table to filter out the web sites and keywords specified below.
Use the above screen to block access to web sites or to web URLs containing the keywords specified in the keyword table.
Schedule Rule The Schedule Rule feature allows you to configure specific rules based on time and date. These rules can then be used to configure more specific access control.
Enable schedule-based Internet access control. 1. Click Add Schedule Rule. 2. Define the settings for the schedule rule (as shown on the following screen). 3. Click OK and then click the APPLY button to save your settings.
SPI and Anti-DoS (Denial-of-Service) firewall protection (Default: Enable) The Intrusion Detection Feature limits access for incoming traffic at the WAN port. When the SPI (Stateful Packet Inspection) feature is turned on, all incoming packets will be blocked except for those types marked with a check in the Stateful Packet Inspection section. Discard Ping from WAN (Default: Enable) Prevents the router from responding to any PING request on the WAN port. E-mail Alert Configuration Enter your email address. Specify your SMTP and POP3 servers, user name, and password.
DMZ (Demilitarized Zone)
If you have a client PC that cannot run an Internet application properly from behind the firewall, then you can open the client up to unrestricted two-way Internet access. Enter the Public IP address of the DMZ host to this screen. Enter the Client PC IP address for clients that want to connect. Adding a client to the DMZ may expose your local network to a variety of security risks, so only use this option as a last resort.
Configuring the 802.11g 54Mbps Router DDNS (Dynamic DNS) Settings
Dynamic DNS (DDNS) provides users on the Internet with a method to tie their domain name to the router or server. DDNS allows your domain name to follow your IP address automatically by having your DNS records changed when your IP address changes. (Default: Disabled) The DDNS service dynamically updates DNS information to a static hostname, provided by the DDNS service provider, as clients IP addresses change. Note: Please visit the web sites of the DDNS providers for details.
If you have a green lit LED, open up a DOS window as described in the previous section and type ipconfig/renew. If you are still unable to get an IP address from the 802.11g 54Mbps Router, reinstall your network adapter. Refer to your adapter manual for information on how to do this. C. I have another IP Address displayed. If you have another IP address listed then the PC may not be configured for a DHCP connection. Once you have confirmed that your computer is configured for DHCP, then follow the steps below. 1. Open a DOS window as described above. 2. Type ipconfig/release.
3. Then type ipconfig/renew.
D. The 10/100 LED does not light after a connection is made. 1. Check that the host computer and the 802.11g 54Mbps Router are both powered on. 2. Be sure the network cable is connected to both devices. 3. Verify that Category 5 cable is used if you are operating at 100 Mbps, and that the length of any cable does not exceed 100 m (328 ft). 4. Check the network card connections. 5. The 10BASE-T/100BASE-TX port, network card, or cable may be defective. E. If wireless clients cannot access the network, check the following: 1.Be sure the 802.11g 54Mbps Router and the wireless clients are configured with the same Service Set ID (SSID). 2. If authentication or encryption are enabled, ensure that the wireless clients are properly configured with the appropriate authentication or encryption keys.
3. If authentication is being performed through a RADIUS server, ensure that the clients are properly configured on the RADIUS server. 4. If authentication is being performed through IEEE 802.1x, be sure the wireless users have installed and properly configured 802.1x client software. 5.If MAC address filtering is enabled, be sure the clients address is included in the Access Control table. 6.If wireless clients are roaming between various 802.11g 54Mbps Routers make sure all the routers and wireless devices in the Extended Service Set (ESS) are configured to the same SSID, and use the same authentication method. F. If you forgot or lost the password: Set the 802.11g 54Mbps Router to its default configuration by pressing the reset button on the back panel for 5 seconds or more. The default password is admin. G. If you can not view the Web User Interface: You will need to verify that the HTTP Proxy feature of your web browser is disabled. This is so that your web browser will be able to view the 802.11g 54Mbps Router configuration pages. The following steps are for Internet Explorer. Windows Internet Explorer 5.5 or above To ensure proper screen refresh after a command entry, ensure that Internet Explorer 5.5 is configured as follows: Under the menu Tools/Internet Options/General/ Note: Temporary Internet Files/Settings, the setting for Check for newer versions of stored pages should be Every visit to the page.
1. Open Internet Explorer. Click Tools, and then select Internet Options. 2. In the Internet Options window, click the Connections tab. 3. Click the LAN Settings button. 4. Clear all the check boxes and click OK to save these LAN settings changes. 5. Click OK again to close the Internet Options window. Macintosh Internet Explorer 1. Open Internet Explorer. Click Explorer/Preferences. 2. In the Internet Explorer Preferences window, under Network, select Proxies. 3. Uncheck all check boxes and click OK.
H. If all other recovery measures fail, and the 802.11g 54Mbps Router is still not functioning properly, take any of these steps: 1. Reset the 802.11g 54Mbps Routers hardware using the web interface, or through a power reset. 2. Reset the 802.11g 54Mbps Router to its default configuration by pressing the reset button on the back panel for 5 seconds or more. Then click LOGIN to access the user interface.
Below is an outline of the technical specifications for the USR5462. Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.11b IEEE 802.11g WAN Interface 10BASE-T/100BASE-TX LAN Interfaces 10BASE-T/100BASE-TX 4 RJ-45 ports: LAN data transfer rate is up to 10/20 Mbps (10BASE-T half/full duplex) or 100/200 Mbps (100BASE-TX half/full duplex) Antenna 2 attached antennas Management Browser-based management Both DHCP Server and Client provided Advanced Features Dynamic IP Address Configuration DHCP, DNS Wireless Security WPA, 802.1x, 40/64/128-bit WEP encryption, SSID broadcast disabled, MAC address filtering Firewall Access control, hacker prevention, logging Virtual Server via NAT & NAPT Virtual Private Network PPTP, L2TP, IPSec pass-through Intrusion Detection, email Alerts, Parental Control
Indicator Panel Power, WLAN, WAN (Link, Activity), LAN (Link/Activity, Speed - 10/100 Mbps) Dimensions 130 x 85 x 32 mm (5.12 x 3.35 x 1.26 in.) Weight 370 g (13.05 oz.) Input Power 12V DC, 1000 mA Maximum Current 0.04 ARMS max. @ 110 V/240 V Power Consumption 5 Watts max. @ 100-240 VAC Internet Standards RFC 826 ARP, RFC 791 IP, RFC 792 ICMP, RFC 768 UDP, RFC 793 TCP, RFC 854-859 TELNET, RFC 1321 MD5, RFC 1497 BOOTP Extension, RFC 1570 PPP LCP Extension, RFC 1631 NAT, RFC1661 PPP, RFC 1700 Assigned Numbers, RFC 1866 HTML, RFC 1945 HTTP, RFC 1994 CHAP, RFC 2131 DHCP, RFC 2637 PPTP Temperature Operating 0 to 40 C (32 to 104 F) Storage -40 to 70 C (-40 to 158 F) Humidity 5% to 95% (non-condensing) Compliances CE Mark Emissions FCC Class B VCCI Class B Industry Canada Class B EN55022 (CISPR 22) Class B C-Tick - AS/NZS 3548 (1995) Class B Immunity
EN 61000-3-2/3 EN 61000-4-2/3/4/5/6/8/11 Safety CSA/NRTL (UL1950, CSA 22.2.950) GS (EN60950) CB (IEC60950)
REGULATORY AND WARRANTY
802.11g 54Mbps Router User Guide (Windows 95, 98, 2000, NT, Me, XP, and Macintosh) Regulatory Information
FCC Declaration of Conformity
802.11g 54Mbps Router User Guide (Windows 95, 98, 2000, NT, Me, XP, and
Macintosh) U.S. Robotics Corporation Two (2) Year Limited Warranty
1.0 GENERAL TERMS: 1.1 This Limited Warranty is extended only to the original end-user purchaser (CUSTOMER) and is not transferable. 1.2 No agent, reseller, or business partner of U.S. Robotics Corporation (U.S. ROBOTICS) is authorised to modify the terms of this Limited Warranty on behalf of U.S. ROBOTICS. 1.3 This Limited Warranty expressly excludes any product that has not been purchased as new from U.S. ROBOTICS or its authorised reseller. 1.4 This Limited Warranty is only applicable in the country or territory where the product is intended for use (As indicated by the Product Model Number and any local telecommunication approval stickers affixed to the product). 1.5 U.S. ROBOTICS warrants to the CUSTOMER that this product will be free from defects in workmanship and materials, under normal use and service, for TWO (2) YEARS from the date of purchase from U.S. ROBOTICS or its authorised reseller. 1.6 U.S. ROBOTICS sole obligation under this warranty shall be, at U.S. ROBOTICS sole discretion, to repair the defective product or part with new or reconditioned parts; or to exchange the defective product or part with a new or reconditioned product or part that is the same or similar; or if neither of the two foregoing options is reasonably available, U.S. ROBOTICS may, at its sole discretion, provide a refund to the CUSTOMER not to exceed the latest published U.S. ROBOTICS recommended retail purchase price of the product, less any applicable service fees. All products or parts that are exchanged for replacement will become the property of U.S. ROBOTICS. 1.7 U.S. ROBOTICS warrants any replacement product or part for NINETY (90) DAYS from the date the product or part is shipped to Customer. 1.8 U.S. ROBOTICS makes no warranty or representation that this product will meet CUSTOMER requirements or work in combination with any hardware or software products provided by third parties. 1.9 U.S. ROBOTICS makes no warranty or representation that the operation of the software products provided with this product will be uninterrupted or error free, or that all defects in software products will be cor-
rected. 1.10 U.S. ROBOTICS shall not be responsible for any software or other CUSTOMER data or information contained in or stored on this product. 2.0 CUSTOMER OBLIGATIONS 2.1 CUSTOMER assumes full responsibility that this product meets CUSTOMER specifications and requirements. 2.2 CUSTOMER is specifically advised to make a backup copy of all software provided with this product. 2.3 CUSTOMER assumes full responsibility to properly install and configure this product and to ensure proper installation, configuration, operation and compatibility with the operating environment in which this product is to function. 2.4 CUSTOMER must furnish U.S. ROBOTICS a dated Proof of Purchase (copy of original purchase receipt from U.S. ROBOTICS or its authorised reseller) for any warranty claims to be authorised. 3.0 OBTAINING WARRANTY SERVICE: 3.1 CUSTOMER must contact U.S. ROBOTICS Technical Support or an authorised U.S. ROBOTICS Service Centre within the applicable warranty period to obtain warranty service authorisation. 3.2 Customer must provide Product Model Number, Product Serial Number and dated Proof of Purchase (copy of original purchase receipt from U.S. ROBOTICS or its authorised reseller) to obtain warranty service authorisation. 3.3 For information on how to contact U.S. ROBOTICS Technical Support or an authorised U.S. ROBOTICS Service Centre, please see the U.S ROBOTICS corporate Web site at: www.usr.com 3.4 CUSTOMER should have the following information / items readily available when contacting U.S. ROBOTICS Technical Support: Product Model Number Product Serial Number Dated Proof of Purchase CUSTOMER contact name & telephone number CUSTOMER Computer Operating System version U.S. ROBOTICS Installation CD-ROM U.S. ROBOTICS Installation Guide 4.0 WARRANTY REPLACEMENT: 4.1 In the event U.S. ROBOTICS Technical Support or its authorised U.S. ROBOTICS Service Centre determines the product or part has a malfunction or failure attributable directly to faulty workmanship and/or materials; and the product is within the TWO (2) YEAR warranty term; and the CUSTOMER will include a copy of the dated Proof of Purchase (original purchase receipt from U.S. ROBOTICS or its authorised reseller) with the product or part with the returned product or part, then U.S. ROBOTICS will issue CUSTOMER a Return Material Authorisation (RMA) and instructions for the return of the product to the authorized U.S. ROBOTICS Drop Zone. 4.2 Any product or part returned to U.S. ROBOTICS without an RMA issued by U.S. ROBOTICS or its authorised U.S. ROBOTICS Service Centre will be returned. 4.3 CUSTOMER agrees to pay shipping charges to return the product or part to the authorised U.S. ROBOTICS Return Centre; to insure the product or assume the risk of loss or damage which may occur in transit; and to use a shipping container equivalent to the original packaging. 4.4 Responsibility for loss or damage does not transfer to U.S. ROBOTICS until the returned product or part is received as an authorised return at an authorised U.S. ROBOTICS Return Centre. 4.5 Authorised CUSTOMER returns will be unpacked, visually inspected, and matched to the Product Model Number and Product Serial Number for which the RMA was authorised. The enclosed Proof of Purchase will be inspected for date of purchase and place of purchase. U.S. ROBOTICS may deny warranty service if visual inspection of the returned product or part does not match the CUSTOMER supplied information for which the RMA was issued. 4.6 Once a CUSTOMER return has been unpacked, visually inspected, and tested U.S. ROBOTICS will, at its
sole discretion, repair or replace, using new or reconditioned product or parts, to whatever extent it deems necessary to restore the product or part to operating condition. 4.7 U.S. ROBOTICS will make reasonable effort to ship repaired or replaced product or part to CUSTOMER, at U.S. ROBOTICS expense, not later than TWENTY ONE (21) DAYS after U.S. ROBOTICS receives the authorized CUSTOMER return at an authorised U.S. ROBOTICS Return Centre. 4.8 U.S. ROBOTICS shall not be liable for any damages caused by delay in delivering or furnishing repaired or replaced product or part. 5.0 LIMITATIONS 5.1 THIRD-PARTY SOFTWARE: This U.S. ROBOTICS product may include or be bundled with third-party software, the use of which is governed by separate end-user license agreements provided by third-party software vendors. This U.S. ROBOTICS Limited Warranty does not apply to such third-party software. For the applicable warranty refer to the end-user license agreement governing the use of such software. 5.2 DAMAGE DUE TO MISUSE, NEGLECT, NON-COMPLIANCE, IMPROPER INSTALLATION, AND/OR ENVIRONMENTAL FACTORS: To the extent permitted by applicable law, this U.S. ROBOTICS Limited Warranty does not apply to normal wear and tear; damage or loss of data due to interoperability with current and/or future versions of operating system or other current and/or future software and hardware; alterations (by persons other than U.S. ROBOTICS or authorized U.S. ROBOTICS Service Centres); damage caused by operator error or non-compliance with instructions as set out in the user documentation or other accompanying documentation; damage caused by acts of nature such as lightning, storms, floods, fires, and earthquakes, etc. Products evidencing the product serial number has been tampered with or removed; misuse, neglect, and improper handling; damage caused by undue physical, temperature, or electrical stress; counterfeit products; damage or loss of data caused by a computer virus, worm, Trojan horse, or memory content corruption; failures of the product which result from accident, abuse, misuse (including but not limited to improper installation, connection to incorrect voltages, and power points); failures caused by products not supplied by U.S. ROBOTICS; damage cause by moisture, corrosive environments, high voltage surges, shipping, abnormal working conditions; or the use of the product outside the borders of the country or territory intended for use (As indicated by the Product Model Number and any local telecommunication approval stickers affixed to the product). 5.3 TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. U.S. ROBOTICS NEITHER ASSUMES NOR AUTHORISES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, WARRANTY, OR USE OF ITS PRODUCTS. 5.4 LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, U.S. ROBOTICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U.S. ROBOTICS OR ITS AUTHORISED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U.S. ROBOTICS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. 6.0 DISCLAIMER: Some countries, states, territories or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to CUSTOMER. When the implied warranties are not allowed by law to be
RH398H 5065R AHS PA4100 Casio 3206 350 A1 98stm-A 10 0 Gigaset 2030 KX-TG8422E TDM-7576R SCS145 5S AG-5700 RRM326P NEO 500 Dvdr3430V Abit BL7 Flash Lite XD110U P42VHA20US 61KEY 21828 RH199S DRW-500 Plume Behringer B-5 Actuators 5zoom-nikkor SUP 014 VRX755VD SR-606EV XV-Z9000E NW-HD3 NP-N230 TCH-M540R MDX-C6400R RA200 Eazygo Nikon FM F1DB102P Fishfinder NHS-10 16589 W 25404 EX-Z3 R-1610 Joybee 125 SC-HT40 XS 100 Navigator Lexmark E340 DV-C503 9050MFP 849 24 Special MRD-F752 42HDS69 NV-MX2500 RMR382 TX-L32x10Y NAD T587 SGH-M610 C-40 Zoom MPX 4500 FTM-350RE KR-650 EKC60110X DRX5575 KX-TG1070FX 80857 PCR-M80 Flox2R RM-23LZ55 Edition Perfection 3590 SHR-2162 Wx ST Sender SPF-75H Deluxe MS-7558 110 IS Kings XE-A113 Roland E-56 Monitor PSR-180 CLX-6210FX LBE 68 72850 FME 20EX Asus S370 Samsung E250 Hotpoint WD64 PG-C45X 20PT228A-78R DSC-T7 Palmtop PC DVD-V5450 ICD-SX67 Review TM-1000 D
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101