VDO Marine Instruments
VDO North America is a worldwide supplier of electronic information and control systems. Since 1921, we have been a leader in instrument and sensor technology, providing leading-edge systems and components for the marine, automotive, heavy duty, and industrial markets. Over the years, VDO has earned a world-renowned reputation for its innovation, strict quality standards, technological expertise and commitment to excellence. Today, we proudly supply quality instrumentation and sensors to some of the most demanding customers in the world.
In addition to being standard equipment for some of the worlds most prestigious boat builders, our products can be found on vehicles manufactured by BMW, Porsche, Mercedes, Saturn, Freightliner, John Deere, Harley Davidson and Yamaha. The products in this catalog are built to this same level of quality and reliability, so you will have years of enjoyment and trouble-free performance. We take pride in our ability to make the worlds best instruments.
Photo courtesy of Thunderbird Products
VDO Marine Instruments and Accessories

TABLE OF CONTENTS:

VISION SERIES VANGUARD SERIES STANDARD LINE BLUE LINE SENDERS Fuel and Water Level Pressure and Temperature Tachometer and Synchronizer Specialty Senders ACCESSORIES LIGHT BULBS INSTRUMENT DIMENSIONS Vision Series Vanguard Series Standard Line Blue Line 22 23

VDO Limited Warranty

VDO North America warrants all merchandise against defects in factory workmanship and materials for a period of 24 months after purchase. This warranty applies to the first retail purchaser and covers only those products exposed to normal use or service. Provisions of this warranty shall not apply to a VDO product used for a purpose for which it is not designed, or which has been altered in any way that would be detrimental to the performance or life of the product, or misapplication, misuse, negligence or accident. On any part or product found to be defective after examination by VDO North America, VDO North America will only repair or replace the merchandise through the original selling dealer or on a direct basis. VDO North America assumes no responsibility for diagnosis, removal and/or installation labor, loss of vehicle use, loss of time, inconvenience or any other consequential expenses. The warranties herein are in lieu of any other expressed or implied warranties, including any implied warranty of merchantability or fitness, and any other obligation on the part of VDO North America, or selling dealer. (Note: This is a Limited Warranty as defined by the Magnuson-Moss Warranty Act of 1975.
VDO North America LLC 188 Brooke Road P.O. Box 2897 Winchester, VA 22603 Phone: (540) 665-0100

VISION SERIES

NEW! VDO introduces the Vision Series of instrumentation. The Vision Series features easy-to-read white graphics on a black dial with red pointers. Black-painted brass bezels provide long-life corrosion resistance. For unsurpassed night time visibility, Vision combines an illuminated pointer and VDOs exclusive Trioptic Illumination, with through-dial lighting. Innovations, such as the use of steppermotor technology and the utilization of VDO designed air core movements, create highly accurate, dependable, and long-lasting SPEEDOMETERS, Pitot type 12V illumination, 3 3/8 (85mm) dia.

Description Part #

instruments. VDOs 360 Spin-Lok mounting system secures the instrument with 360 of force, allowing for easy installation and prevents gauge rotation or panel warping. Illumination color can be changed by using optional light diffusers.
35 MPH gauge only 50 MPH gauge only 80 MPH gauge only Pitot tube pickup and sending kit TACHOMETERS with hourmeter* Programmable, 12V, 3 3/8 (85mm) dia.

Description

260 270

101 900

Part #
For alternator, DDEC, inductive, generator, and gas applications. 3,000 RPM 4,000 RPM 6,000 RPM 333 164
*Hour meter functions only when engine is running. For sender listings, see page 16.

260 111

TACHOMETERS, without Hourmeter Programmable, 12V, 3 3/8 (85mm) dia.
For alternator and DDEC applications 3,000 RPM 4,000 RPM For ignition gas 4, 6, 8 cylinder and O/B applications 6,000 RPM 333 154
See page 16 for sender listings.
SYNCHRONIZER Programmable, 33/ 8 (85mm) dia.

Alternator, inductive, gas TEMPERATURE GAUGES Electrical, 12V, 2 1/16 (52mm) dia.

Description On Gauge

333 190

333 163

220F 250F 300F
U.S. ohm range VDO ohm range VDO ohm range

Water Water Oil

310 106
See page 15 for sender listings.
Mechanical, 12V illumination, 2 1/16 (52mm) dia., 1/2 adapter included
Description On Gauge Part #

265F 265F

72 cap. tubing 96 cap. tubing

Water Water

180 102
PRESSURE GAUGES Electrical, 12V, 2 1/16 (52mm) dia.
psi psi psi psi psi psi psi
10-180 240-33 10-180 240-33 10-180 240-33 10-180
ohms ohms ohms ohms ohms ohms ohms
(VDO) (US) (VDO) (US) (VDO) (US) (VDO)
Oil Oil Oil Oil Oil Oil Trans

350 104

See page 14 for sender listings.
Mechanical, 12V illumination, 2 1/16 (52mm) dia., 1/8-27 NPT connection

psi psi psi psi psi

Boost Boost PSI Oil Oil

150 111

PYROMETER, 2 1/16 (52mm) dia., 12V
1,600F, Complete kit Gauge only Pyro sender only VOLTMETER, 2 1/16 (52mm) dia., 12V

323 892

332 103
TRIM GAUGES, 2 1/16 (52mm) dia., 12V OMC Mercury Johnson O/B OMC O/B FLUID LEVEL GAUGES, 2 1/16 (52mm) dia., 12V

382 155

10-180 ohms (VDO) 240-33 ohms (US) Adjustable, for VDO tube senders 10-180 ohms (US) 240-33 ohms (US)
See page 13 for sender listings.
Fuel Fuel Fuel Water Water

301 110

CLOCK, 2 1/16 (52mm) dia.
Quartz, 12V HOURMETER, 2 1/16 (52mm) dia.

370 152

Non-Illuminated, 12V See page 19 for Vision Series instrument specifications and dimensions. Trioptic Illumination for superior visibility.

331 151

VANGUARD SERIES
Now you can benefit from a new dimension in instrument illumination with our innovative Vanguard series. Exclusive illuminated heatresistant pointers stand out sharply, rather than disappearing into the dial face. Through-dial lettering is highly legible, day or night. Bi-color LEDs allow the choice of red or green illumination for compatibility with todays modern navigational equipment. Other features include dual lenses to prevent fogging, and individual or four gauge combination clusters for design flexibility. The unique Spin-Lok mounting system reduces installation depth. Only VDO could build the Vanguard series to give you the assurance of a lifetime of use. The Vanguard Series is offered with square bezels as standard styling. Round bezels may be purchased as an accessory kit.
SPEEDOMETER, Pitot Type, 4 (100mm) dia. Indicator Head Only, Pitot Pick-Up Kit available separately.

Description 12V 24V

50mph 75mph Pitot Tube Pick-Up & Tubing Kit

270 900

TACHOMETER, Electronic, 4 (100mm) dia., with hourmeter 3,000 RPM, w/EHM, Diesel Inductive/DDEC/Alternator Generator 1:1 & 1:2 Ratios 4,000 RPM, w/EHM, Diesel Inductive/DDEC/Alternator Generator 1:1 & 1:2 Ratios 6,000 RPM, w/EHM, Ign., Gas & O/B 8,000 RPM, w/EHM, Ign., Gas & O/B
For sender listing see page 16.

209 211

260 203
TACHOMETER, Electronic, 4 (100mm) dia., without hourmeter
3,000 RPM, w/o EHM, Diesel Inductive/DDEC Alternator Generator 1:1 & 1:2 Ratios 4,000 RPM, w/o EHM, Diesel Inductive/DDEC/Alternator Generator 1:1 & 1:2 Ratios 6,000 RPM, w/o EHM, Ign., Gas & O/B 8,000 RPM, w/o EHM, Ign., Gas & O/B

223 225

333 209
ENGINE SYNCHRONIZER, 4 (100mm) dia.
Ignition, Gas Outboard & Diesel Programmable Signal

333 241

333 243
FOUR-GAUGE CLUSTER, Electrical, 4 (100mm) dia.
Fuel / Volt / 80PSI / 250F, VDO Sender Fuel / Volt / 80PSI / 220F, US Sender Fuel / Volt / 150PSI / 250F, VDO Sender Fuel / Volt / 80PSI / 250F, US Sender Consult the sender section for complete list of senders.

110 110

209 217B

110 205

THREE-GAUGE CLUSTER, Electrical, 4 (100mm) dia.

Volt / 80PSI / 220F

US Sender

110 213

Consult the sender section for complete list of senders.
TEMPERATURE GAUGES, Electrical, 2 1/16 (52mm) dia.

220 F 250 F 300 F

US Ohm range VDO Ohm range VDO Ohm range

310 201

310 203
PRESSURE GAUGES, Electrical, 2 1/16 (52mm) dia.
80PSI 80PSI 150PSI 150PSI 400PSI
10-180 240-33 10-180 240-33 10-180

Ohms Ohms Ohms Ohms Ohms

(VDO) (US) (VDO) (US) (VDO)

350 203

VOLTMETERS,

2 1/16

(52mm) dia.

12V 24V

8-16 Volts Range, 12V Systems 16-32 Volts Range, 24V Systems

332 203

ANGLE INDICATOR GAUGES, Electrical, 2 1/16 (52mm) dia. Rudder angle indicator 40 /0/ 40 21/16 (52mm dia.) Power trim, Mercury

See page 17 for sender listings.

382 205

FLUID LEVEL GAUGES, Electrical, 2 1/16 (52mm) dia.

Description 12V

Fuel Adjustable, Tube Sender Fuel 10-180 Ohms Fuel 240-33 Ohms Water 10-180 Ohms Water 240-33 Ohms
(VDO) (VDO) (US) (VDO) (US)
LOGIC ENGINE MONITORING INSTRUMENTS May be used in conjunction with the VDO Vanguard Line. Red, edge-lit illumination only with Logic grey bezel. AMMETER SYSTEM, -80 /0 / 80+, 2 1/16 (52mm) dia.

382 207

Includes gauge and shunt. 12/24V Replacement Parts Ammeter, 21/16 (52mm) dia. ENGINE HOURMETER, 2 1/16 (52mm) dia.

192 221

12/24V

339 201

301 201
VANGUARD SERIES Continued

VANGUARD ACCESSORIES

Square Bezel(w/Gasket) Square Bezel (w/Gasket) Round Bezel(w/Gasket) Round Bezel(w/Gasket) Lens Kit, Inner & Outer Lens Kit, Inner & Outer Panel Clamp, Back Mount Type Panel Clamp, Back Mount Type Spin-Lok Clamp Spin-Lok Clamp Gauge Blank Gauge Blank
(63mm) 47/8 (125mm) 27/16 (63mm) 43/4 (119mm) 4 (100mm) 21/16 (52mm) 21/16 (52mm) 4 (100mm) 21/16 (52mm) 4 (100mm) 21/16 (52mm) 47/8 (125mm)

100 100

201 202
Vanguard instruments feature dual lenses to prevent fogging.
DEPTH SOUNDER, 2 1/16 (52mm) dia. Includes waterproof LCD indicator, 30 harness, inside-hull transducer and built-in alarm. Selectable Ranges: 2.5-200 Feet 0.8-61 Meters 0.5-33 Fathoms
Complete Set Indicator Only Transducer (Inside Hull) Thru-Hull Transducer

347 347

201 005
VANGUARD DOPPLER SPEEDOMETER
The Vanguard Doppler Speedometer utilizes microwave, radar-based speed sensing technology to provide precise speed readings from 2 to 50 mph. Using a single transducer, transom-mounted above the waterline, the Vanguard Doppler Speedometer offers unmatched accuracy at all speeds and conditions. Vanguard Doppler eliminates clogged, bent, or failed pitot tubes and troublesome paddlewheels. Each kit contains an electronic analog display head and a transducer with 30 of cable.

50 MPH Doppler Kit Round bezel 43/4 (119 mm) See page 21 for Vanguard Series instrument specifications and dimensions.

600 005

Photo courtesy of Four Winns
Photo courtesy of Silverton

STANDARD LINE

All VDO Standard Line gauges come with longlasting brass bezels with black or chrome plating. Available for both gasoline and diesel engines, these high performing instruments have edge-lit SPEEDOMETER, Pitot-Type, 12V 3 3/8 (85mm) dia. Order Pitot Pick-Up Kit separately.

Description Chrome Black

illumination for night use. All instruments are 12V unless otherwise noted. See page 22 for Standard Line instrument specifications and dimensions.
50 MPH 75 MPH 100 MPH Pitot Tube
Indicator Only Indicator Only Indicator Only Pick-Up & Tubing Kit

513 900

For 24V application, use bulb #(1 per instrument).
TACHOMETER, 3 3/8 (85mm) dia. Electronic Programmable Signal Input
Description With engine hourmeter Chrome Black
3,000 RPM Diesel, 12/24V, Ind., DDEC, Alt. 4,000 RPM Diesel, 12/24V, Ind., DDEC, Alt.
For 24V applications, use bulb #(2 per instrument). Without engine hourmeter

333 563

333 564

260 507

3,000 RPM Diesel, 12V, Ind., DDEC 4,000 RPM Diesel, 12V, Ind., DDEC 6,000 RPM Ign., Gas, I/O, 12V, 4-6-8 Cyl.
For 24V applications, use bulb # (1 per instrument). See page 16 for sender listings.

333 535

333 536
TACHOMETER, Electronic, 12V, 3 3/8 (85mm) dia.
Generator Type 1:1 Ratio 3,000 RPM* 3,000 RPM* 1:2 Ratio 4,000 RPM* 1:2 Ratio Alternator Type 4,000 RPM* 6,000 RPM* Ignition Type 6,000 RPM 12V only 4-6-8 Cyl. Outboard Type 7,000 RPM 12V only 12 Pole Alt.
*For 24V applications, use bulb #600 807. See page 16 for sender listings.

333 521

333 522

333 533

TACHOMETER, Mechanical, 3500 RPM, 3 3/8 (85mm) dia.

5/8-18

Chrome
w/Rev. Counter 1:2 Ratio Thread 3/8 (85mm) dia. ENGINE SYNCHRONIZER, 3

128 502

Alternator, Inductive, Gas

333 551

333 552
TEMPERATURE, Electrical, 12V, 2 1/16 (52mm) dia.
220 F /100C 250F /120C 300F /150C

310 511

310 512

310 502

TEMPERATURE, Mechanical, 12V, 2 1/16 (52mm) dia.

265F /130C 265F /130C

72 tubing* 144 tubing*

180 503

180 504
*Includes 1/2 -14 NPT Engine Block Adapter.
PRESSURE, Electrical, 12V, 2 1/16 (52mm) dia.

PSI /2Kp/cm2 PSI /5Kp/cm2 PSI /5Kp/cm2 PSI /6Kp/cm2 PSI /10Kp/cm2 PSI /25Kp/cm2 PSI /27Kp/cm2
10-180 240-33 10-180 10-180 10-180 10-180 10-180
Ohms Ohms Ohms Ohms Ohms Ohms Ohms
(VDO) (US) (VDO) (VDO) (VDO) (VDO) (VDO)

350 506

PRESSURE, Mechanical, 12V illumination, 2 1/16 (52mm) dia.
PSI / 7Kp/cm2* 150 PSI / 10Kp/cm2* 400 PSI / 28Kp/cm2*

*1/8-27 NPT Connection.

PSI / 2Kp/cm2*

150 150

509 511

510 512

301 505
FLUID LEVEL, 12V, 2 1/16 (52mm) dia.
240-33 Ohms (US) 10-180 Ohms (VDO) VDO Tube-Type Sender, w/Adjustable 90-0 Ohm Range 10-180 Ohms (VDO) 240-33 Ohms (US)

301 511

301 512
VOLTMETER, 12V & 24V, 2 1/16 (52mm) dia.

8-16 Volts 18-32 Volts

12V System 24V System

332 503

332 504

370 501

CLOCK, 2 1/16 (52mm) dia. Quartz, 12/24V
For 24V application, use bulb #600807.

370 502

HOURMETER, Quartz, 12/24V, 2 1/16 (52mm) dia.
Illuminated Non-Illuminated Illuminated Non-Illuminated
Generator Hours 3-Hole Flange

331 514

331 501
For 24V application, use bulb #600 807.
AMMETER, 12V, 2 1/16 (52mm) dia.
60 Amps 80 Amps 150 Amps Replacement
Non-Shunted Non-Shunted Shunted, Kit includes Shunt Shunt 150 Amps

190 391

953 003
ANGLE INDICATOR GAUGES, 12V, 2 1/16 (52mm) dia.
Power trim, all Mercury Rudder Angle, VDO Sender

382 503

382 504

BLUE LINE Service Parts

Blue Line Service Parts are packaged individually and contain both square and round bezels (display package only), mounting hardware, and are fully illuminated.
SPEEDOMETER, Pitot Tube Type Indicator Head Only, 3 3/8 (85mm) dia. Order pickup kit separately.
125 MPH 50 MPH 75 MPH Pitot tube pickup and tubing kit TACHOMETERS for Gasoline Engines Floating Ground. 3 3/8 (85mm) dia.

015 900

6,000 RPM, All Conventional I/O

430 001

260 014
TACHOMETERS for Diesel Engines, 12/24V

Generator type, for VDO Sender Unit: 3,000 RPM, GEN, 1:2 Ratio* 33/8(85mm) dia. 4,000 RPM, GEN, 1:2 Ratio* 33/8(85mm) dia. 4,000 RPM, GEN, 1:1 Ratio* 33/8(85mm) dia.
*For 24V applications, use bulb #600 807. Available by special order only.
Alternator type, 12/24V Single & Dual Station, Adjustable Cal.: 4,000 RPM, w/EHM, 12V Only 4(100mm) dia. 4,000 RPM, w/oEHM, 12/24V 33/8(85mm) dia. 6,000 RPM, w/EHM, 12V Only 4(100mm) dia. 6,000 RPM, w/oEHM, 12/24V 33/8(85mm) dia. Inductive type: 4,000 RPM 504K Imp.126 teeth 33/8(85mm) dia. 430 011
ENGINE SYNCHRONIZERS, 3 3/8 (85mm) dia.

337 003

Ignition / Gas

NLA - See Vanguard

250F / 120C, VDO Sender 300F / 150C, VDO Sender

313 002

313 004
30 PSI / 2 BAR 80PSI / 5 BAR 80PSI / 5 BAR, 150PSI / 10 BAR 350PSI / 25 BAR 400PSI / 28 BAR
10-180 10-180 240-33 10-180 10-180 10-180
Ohms Ohms Ohms Ohms Ohms Ohms
(VDO) (VDO) (US) (VDO) (VDO) (VDO)

352 352

003 015

313 001

Fuel Fuel Fuel Water
VDO Lever-Type Sender 306 US Lever-Type Sender 306 VDO Tube-Type Sender / Adjustable 306 VDO Sender 306

005 002

306 004

352 001

BLUE LINE Continued
VOLTMETERS, 2 1/16 (52mm) dia.
8-16 Volts Range 16-32 Volts Range
12 V Systems 24 V Systems

431 002

AMMETER, NON-SHUNTED TYPE, 2 1/16 (52mm) dia. 24 V light bulbs extra.

50-0-50 Amp 80-0-80 Amp

6-24 Volts 6-24 Volts

192 003

306 001
AMMETER, SHUNTED-TYPE, 2 1/16 (52mm) dia. Kit includes 80A shunt, wiring, and 12/24V bulbs.
Kit:80-0-80 Amp 6-24V Replacement Instrument Only CLOCKS, Quartz

192 020

4 (100mm) dia. 2 1/16 (52mm) dia.

371 030

ENGINE HOURMETER, Quartz, 2 1/16 (52mm) dia. 12/24V Systems ANGLE INDICATOR GAUGES, Electrical

339 001

Rudder Angle Indicator, 40 / 0 / 1/16 (52mm) dia. 33/8 (85mm) dia., 12 / 24V Power trim, Mercury, 2 1/16 (52mm) dia.
See page 17 for Rudder Angle Indicators.

382 712

407 003
ACOUSTICAL WARNING ALARM, 85dB @ Distance of 12, 2 1/16 (52mm)

12/24 Volts

Square Bezel Only

BLUE LINE ACCESSORIES

Square Bezel Square Bezel Round Bezel Round Bezel Lens Kit Inner & Outer Lens Kit Inner & Outer Gauge Blank Gauge Blank

*Includes Bezel Gasket.

Sq.* 4 7/8(125mm) Sq. for 3 3/8(85mm) and 4(100mm) dia. housings* 2 1/2(63mm) dia.* 4 3/4(119mm) dia.* 4(100mm) 2 1/16(52mm) 2 1/2(63mm) dia. 47/8(125mm) dia.

2 1/2(63mm)

100 202
See page 23 for Blue Line instruments specifications and dimensions.
Photo courtesy of Hatteras Yachts
FUEL AND WATER LEVEL SENDERS

FUEL TANK SENDERS, Swing-Arm Type 2 1/8 (54mm), Bolt Circle dia., left or right hand float arm travel.
Single Station Reading, 12/24V Without Installation Kit No. (6-23Depth) 226 With Installation Kit No. (6-23 Depth) 226 Dual Station Reading, 12/24V or 0-90 Ohms (For using two fuel gauges with one sender.) With Installation Kit No. 226 With Floating Ground (6-21 Depth) 226 Replacement US Fuel Sender, 12/24V Includes Installation Kit No. 226 451, standard ground. 240-33 Ohms (E-F): Stewart Warner, Datcon, Faria, Medallion & Teleflex 226 Fresh Water Level Sender, 12/24V 2 1/8 bolt circle, adjustable tank depths 8-24, installation kit included. VDO single station. 226

001 002

008 403

226 001

TUBE TYPE TANK UNITS FOR ADJUSTABLE FUEL LEVEL GAUGE 2 1/8 (54mm) Bolt Circle
Length # on sender Part No.
5 1/9/11/16 915/12 1/7/5/15/1/1/5/23 7/1/32 7/8

Length

(131.5 mm) (166.5 mm) (221.5 mm) (251.5 mm) (279.5 mm) (310.5 mm) (341.5 mm) (372 mm) (404.5mm) (433.5 mm) (463.5 mm) (498.5 mm) (530 mm) (596.0 mm) (692.2 mm) (787.4 mm) (835 mm)
82/8/17 82/8/18 82/8/21 82/6/97 82/7/22 82/5/136 82/5/137 82/7/4 82/5/142 82/5/98 82/5/44 82/5/117 82/7/5 82/7/17 82/5/11 82/5/72 82/5/34

# on sender

226 451

226 053

31/8 (80mm) Bolt Circle

Part No.

21 3/1/3/3/3/11/1/3/4
(536.0 mm) (641.0 mm) (716.0 mm) (741.0 mm) (781.0 mm) (881.0mm) (916.0 mm) (1,085.9 mm)
82/9/37 82/9/48 82/9/16 82/9/29 82/9/19 82/14/3 82/14/11 82/9/40

224 224

052 050

ACCESSORIES

Fuel Sender Installation Kit, (54mm) Bolt-on fuel sender mounting kit; for fuel tanks without threaded mounting screw holes Replacement Fuel Sender Gaskets Neoprene-type, 2 1/8(54mm) Cork-type, 3 1/8(80mm), Fuel & Water

600 525

TUBE TYPE TANK UNITS
PRESSURE AND TEMPERATURE SENDERS
Universal Sender Kits take the guess work out of finding the right sender for your application. NOTE: Failure to match instrument and sender UNIVERSAL PRESSURE SENDER KITS
will result in incorrect instrument readings. All kits have SAE tapered threads; DO NOT USE TEFLON TAPE!
Includes 1/8-27 NPT pressure sender,1/4-18 bushing, 3/8-18 bushing and 1/2-14 bushing.
INDIVIDUAL PRESSURE SENDERS

Description Thread

1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-28 1/8-28 1/4-18 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27

Warning contact

0-30 0-80 0-80 0-80 0-80 0-80 0-80 0-80 0-80 0-80 0-100 0-100 0-150 0-150 0-150 0-150 0-350 0-350 0-400 0-400
PSI PSI/5 bar PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI/10 bar PSI PSI PSI PSI PSI PSI/28 bar PSI
NPT NPT NPT NPT NPT NPT NPT BSP BSP NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

7.0 PSI

5.7 PSI
32/25 29/4 30/23 32/1 1/1 3/1 N/A 29/61 30/65 29/8 N/A N/A 29/12 32/14 3/2 1/2 2/1 38/3 38/8 2/3

360 362

801* 811* 406 004
X X X X X X X X X X X X X X X X X X X X

*240-33 Ohm

PLEASE NOTE: VDO senders have tapered threads; DO NOT use teflon tape or pipe sealant. This will interfere with grounding.

Pressure sender

St Floa ting ation Gro Dua und Stan l Statio n dar dG rou Dua nd l Floa Statio n ting Gro und
Universal pressure sender kit Photos courtesy of Robalo
Sing Stan le Stat io dar dG n rou Sing nd le
80 PSI (5 Bar) 150 PSI (10 BAR)

360 905

UNIVERSAL TEMPERATURE SENDER KITS
*Includes 1/8-27 NPT temperature sender, 1/4-18 bushing, 3 /8-18 bushing, 1/2-14 bushing and 1/4 spade terminal.
INDIVIDUAL TEMPERATURE SENDERS
Description Thread Warning contact # on sender Part #
250F / 120C 1/8-27 NPT 1/2-14 NPT 250F 1/2-14 NPT 250F 250F M14 x 1.5 250F M14 x 1.5 250F M16 x 1.5 1/2-14 NPT 250F 1/4-18 NPT 250F 1/4-18 NPT 250F 3/8-18 NPT 250F 3/8-18 NPT 250F 3/8-18 NPT 250F 3/8-18 NPT 250F 1/2-14 NPT 250F 1/2-14 NPT 250F 1/2-14 NPT 250F 1/4-18 NPT 250F 1/4-18 NPT 250F 3/8-18 NPT 250F 300F/150C 1/4-18 NPT 1/2-14 NPT 300F 400F / 200C 1/8-27 NPT

205F 230F 205F

801/5/1 803/1/6 803/1/6 803/1/6 801/1/26 801/1/29 803/1/30 801/1/9 805/1/7 801/1/38 805/1/5 801/2/4 805/3/3 801/1/16 805/1/4 N/A 801/2/1 805/3/1 801/1/7 801/4/17 801/4/6 801/18/1

NLA 323 086

Temperature Senders

Photo courtesy of Tiara

Sing Stan le Stat io dar dG n rou Sing nd Floa le Stat ting ion Gro Dua und l St Stan atio n dar dG rou Dua nd l St Floa atio n ting Gro und

250F (120C) 300F (150C)

323 905
X X X X X X X X X X X X X X X X X X X X X X
Universal temperature sender kit
TACHOMETER AND SYNCHRONIZER SENDERS
Electric Generator Senders For use with tachometers or engine synchronizers designated as generator type. Current: 10V AC @ 1000 RPM, 4 Pulses/Revolution. RPM Reading Only
Thread M22 x 1.5 Thread RPM Reading with Average Hour Counter

7/8-18

340 002

Part # 340 008

Thread M22 x 1.5 Thread GENERATOR SENDER DRIVE KEYS

340 007

.152.187.203.104.200 INDUCTIVE / MAGNETIC PICK-UP SENDER For use with tachometers and engine synchronizers designated as inductive type.

340 060

M18 x 1.Long, 3/4-16 UNF Thread 31/2 Long, 3/4-16 UNF Thread

340 021

340 020
Photo courtesy of Mainship

Photo courtesy of Robalo

SPECIALTY SENDERS AND ACCESSORIES
PITOT TUBE & PICKUP KIT For Pitot type speedometers.
Includes pitot tube pickup and 20 tubing RUDDER ANGLE INDICATOR SENDERS For use with VDO 12/24V Gauges.
Single Station Transmitter for operating one VDO indicator. Dual Station Transmitter for operating two VDO indicators from one sender. Installation Kit connects transmitter arm assembly to rudder cable. Replacement Arm RESISTOR KITS

440 003

440 004

440 100

Part # 440 003
for conversion of 12V systems to 24V systems

391 704

TUBING KITS For mechanical pressure gauges. Includes one each: 1/8 - 27 NPT and 1/4 - 18 NPT adapters.
6 nylon tubing 16 nylon tubing 6 copper tubing

150 856

150 851
REMOTE MOUNT PRESSURE SENDER ADAPTERS Hose adapter for remote mounting of pressure senders. Extremely useful in high vibration environments. Includes pressure sender mounting clamp.
- 27 NPT connection M10 x 1 connection 1/8 - 28 BSP

150 754

240 902
PUSH-ON CONNECTORS For VDO 3-prong electrical 21/16 (52mm) dia. gauges. Cannot be used for tachometers, synchronizers, ammeters, or the Vision or Vanguard lines.
With crimp terminals Without crimp terminals

600 814

WARNING LIGHTS 12V snap-in warning lights with bulb. Requires 1/2" hole.
Description Part # 240 026
Red lens Green lens Yellow lens Blue lens

600 600

846 847

Warning lights

LIGHT BULBS AND SOCKETS
LIGHT BULBS: Type A Fits socket numbers 600 813, 600 816, and 600 817.

9/32" 9/32"

Light Bulbs

12V 2W 24V 3W

600 807
Type B Fits socket numbers and 600 819.

11/32" 11/32"

12V 2W 12V 4W

600 806

Type C Fits socket number 600 821.

3/8"

12V 2W

600 820

Type D Fits socket number 600 808.
Peanut bulb 12V 1.2W Peanut bulb 12V 1.2W Peanut bulb 24V 1.2W Type E Fits socket #600 839

Red* Red*

600 822

LIGHT BULB SOCKETS

* red bulbs used in BlueLine Instrument Series only.
Wedge-base bulb Wedge-base bulb

600 826

600 813

600 819

INSULATED LIGHT BULB SOCKETS
uses bulb type A uses bulb type B Uses peanut type bulb D Uses bulb type E

15/32",

3/8",

808 839

600 808

600 839

3/8" 3/8"
steel, uses bulb type A brass, uses bulb type A 5/8" steel, uses bulb type C 15/32" steel, uses bulb type B

821 818

600 816

600 817

LIGHT DIFFUSERS The easy and convenient way to change the lighting color in your VDO gauge. Simply slips over light bulb to give your dash a whole new color at night.

9/32"

600 821

600 818

Red, Type A, bulb Green, Type A, 9/32" bulb Red, Type B, 11/32" bulb Green, Type B, 11/32" bulb Red, Type D, peanut bulb Green, Type D, peanut bulb Red, Types E and C bulbs Green, Types E and C bulbs

861 862

VDO Marine designs, engineers, and manufactures electronic information, control systems, and fuel systems for marine service applications and boat builders around the world. VDO Marine is a division of VDO North America, an ISO 9001 Certified Manufacturer and a Mannesmann company. Mannesmann AG is a global technology company based in Germany, with over 120,000 employees at work in facilities around the world.
VDO North America LLC 188 Brooke Road Winchester, VA 22603 Phone: (540) 665-0100 Fax: (540) 722-4198 www.vdona.com