WARRANTY Emissive Energy Corp. warrants Victorinox Brand Microlights against defects in material and workmanship for the life of the light. Damages caused by alteration, misuse, abuse, battery leakage and battery expiration are not covered by this warranty. This warranty does not affect your statutory rights. Emissive Energy Corp., Victorinox and Swiss Army Brands, Inc. disclaim any responsibility for incidental or consequential damages. FOR ALL WARRANTY CLAIMS OR REPAIRS. PLEASE MAIL FLASHLIGHT TO: EMISSIVE ENERGY CORP. ATTENTION: CUSTOMER SERVICE 135 CIRCUIT DRIVE NORTH KINGSTOWN RI 02852 FOR INQUIRIES CALL: EMISSIVE ENERGY CUSTOMER SERVICE: 401-294-2030 Manufactured under one or more of the following United States and/or international patent numbers, US: 6,769,786; 6,834,976; 6,796,674; 6,840,653; 6,709,129; 6,819,505; 6,971,762; 6,974,234; 6,942,365; D511,787; D508,510; D501,054; D468,851; D473,961; D476,103; D475,798; D468,464; D463,593; D468,464; D463,593; D434,164; D455,510; D455,513; D468,851; D479,013; TW086715; TW086712; UK: 3007640; 3007639; 2095440; 2099654; 3007640 DE: 08 283.7; 08 941.3; 02 139.4 Other US and international utility and design patents are pending.
A HERITAGE OF CRAFTSMANSHIP
In 1897 the Original Swiss Army Knife was created in the small village of Ibach, Switzerland. Since that time Victorinox has become known for precision, quality, functionality and versatility. This century old heritage has been extended to Victorinox Lighting Gear, which embodies the distinctive design and superior performance Victorinox has come to represent over the years.

LED FLASHLIGHT

Congratulations on your purchase of a Victorinox LED Flashlight. Please take a moment to read these instructions. FLASHLIGHT OPERATION Your Victorinox LED Flashlight has a rotating head for on/off operation. Rotate the head clockwise to turn ON and counter-clockwise to turn OFF.
Emissive Energy Customer Service: 401-294-2030

www.inovalight.com

Victorinox, the famous Victorinox Cross and Shield, and Swiss Army are trademarks owned by Victorinox AG and its affiliates.

VMS06060

BATTERY REPLACEMENT AND SIZE Depending on which size Victorinox Flashlight you purchased, AAA, AA or C, replace with appropriate alkaline batteries. Insert new batteries with the same orientation as illustrated. MAINTENANCE AND PRECAUTIONS Periodically clean all threads and apply petroleum jelly to threads and O-rings. Battery installation and disposal should be handled by an adult. Victorinox LED Flashlights are water resistant but should not be submerged in water.

BASIC OPERATING INSTRUCTIONS NIGHT VISION II

THREE HAND ANALOG QUARTZ

NOTE: Refer to page 4 to determine what type of crown your timepiece has (pull-out or screw-down).
SETTING THE DATE AND TIME A. Pull out the crown to position (2). B. Rotate the crown toward you until the date showing is the day before the desired setting. C. Pull out the crown to position (3) and rotate toward you. When midnight is reached, the date will advance to the desired date. Continue to turn the crown until the desired time is set. Remember, the date advances at 12:00 midnight, not 12:00 noon. D. Push in the crown, returning it to position (1). The date and time are now set.

NIGHT VISION II

The Night Vision II makes use of Light Emitting Diodes (LEDs) for its flashlight and soft dial lighting. LEDs last longer than conventional incandescent bulbs, and are more durable and energy-efficient.
Please note that the battery life of the lighting functions is significantly reduced with greater use. To maximize battery life, please turn lighting functions off when not in use. Luminous hands and markers are activated by external UV lighting. Pusher for Lighting Functions
Locator Beacon Function LED Light Functions
TIME AND DATE To set time and date please refer to instructions for Three Hand Analog Quartz. Lighting Functions Night Vision II 1. Dial Illumination Mode One quick push of the pusher will activate the soft LED light for 5 seconds. The angle of the light directs it to reflect off the crystal for maximum visibility of 1. the dial and hands. 2. Extended Light Mode Two quick pushes of Pusher the pusher will activate the LED flashlight for 2 minutes. Light will automatically deactivate, or you can turn the light off by pressing the pusher once.
3. Signal Mode Three quick pushes of the pusher will cause the light to strobe for 2 minutes. To deactivate, press pusher once. 4. Intense Signal Mode Holding the pusher for 5 seconds will activate an intensified LED strobe that flashes continuously. Intense Signal Mode is brighter than normal Signal Mode flashing. To deactivate, press pusher for 5 seconds. 2. 5. Locator Mode Red LED locator beacon is positioned at the 6 oclock marker and blinks once every 10 seconds. An easy way to find your timepiece.

Pusher

6. Battery End of Life Mode Red LED locator beacon positioned at the 6 oclock marker will flash 3 times every 10 seconds indicating lighting batteries should be changed.
Your Night Vision II timepiece has a built-in feature to protect battery consumption if the pusher used to operate the LED is accidentally pressed (for example in luggage or coat pocket, etc.). If the pusher is pressed for more than 30 consecutive seconds, the lighting feature will shut off automatically. Batteries for Light Function Night Vision II The lighting modules of your Night Vision II timepiece operate off of a separate battery power source than the timepiece movement itself (1 battery cell). Batteries for light function are: Night Vision II one 3 volt 2032 Lithium Please use an authorized Victorinox Swiss Army service center in the event either the light module or timepiece battery require replacement.

BATTERY

Worn Batteries should be replaced immediately. Substituting interchangeable batteries is not recommended. Battery change should be performed by a qualified technician who should also check the condition of the gaskets and the o-ring at the same time. Battery is not covered by the warranty.