Xs-Drive II+ VP2160

( VP2160 )
1. Ports Connection and Buttons 2. Using the Xs Drive II+ -Charge Batteries -Power On / Off 3. Driver Installation 4. USB Connection 5. Format Hard Disk under Win 2K/ Win XP 6. Downloading or Editing the files on PC 6. Data Transfer from Memory Card 7. Auto Power off Function 8. Battery Recharge 9. If an erroneous display / operation occurs 10. Care for the Hard Drive and unit 11. Troubleshooting

CAUTION

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electronic shock.
IMPORTANT WARRANTY INFORMATION
To reduce the risk of fire or shock hazard, do not expose this equipment to rain , any liquid or moisture. Vosonic shall have no obligation to repair ,replace or refund until the customer returns the defective product to Vosonic. The repairs and replacement service will not apply to PRODUCT units that were misused, repaired without authorization or by other reasons beyond the range of intended use. Any replacement product may be either new or like new, provided that it has functionality at least equal to that of the product being replaced. Vosonic is not responsible for any data stored on returned products, please backup any data prior to shipping the unit. The limited warranty for accessories (included battery ) is only valid for 6 months from the date of purchasing. All OUT OF WARRANTY repairs maybe subject to a normal repair fee. Please contact your dealer or Vosonic for current charges.

Features:

USB 2.0 High speed compatible A stand -alone ,Palm-sized rechargeable storage device. No PCs required. Support SmartMedia , SD/MMC , Memory Stick , Memory Stick Pro and Compact Flash Type I/II ,IBM MicroDrive , Mini-SD(with adapter) , RS-MMC (with adapter), MS Duo (with adapter),MS Pro Duo (with adapter) Infinite memory & storage expansion configuration with internal Hard Disk Able to copy the data from memory card(s) into the internal hard drive Fast & easy file transfer and storage with a simple button operating. Back up all kinds of files as the 2.5" external HDD , USB card reader/ writer. Convenient charged by a generic AC/DC adapter.

Package Checklist :

Main unit USB cable Pouch Warranty Card English user's guide Setup CD-ROM Power Adapter (100-240V auto switched )

SPECIFICATION:

ITEM DESCRIPTION
Mini-SD (with adapter) ,RS-MMC (with adapter), LCD MS Duo (with adapter), MS Pro Duo (with adapter). Amount of battery power File transfer status Main storage (HDD) capacity Memory card / HDD error indicator USB Access Charge Status 2.5 inch Unlimited ( Any 9.5mm 2.5" HDD ) Internal Power: Li-ion rechargeable battery 3.7V x 1 (1100mA) Model Number:Fuji-NP60 External Power:5V adapter (2.5A) USB 2.0 interface port Support Standard FAT 12/16/32 Windows98/98SE with driver Win 2000 SP3 above without driver Linux Kernel version 2.4 or above without driver Mac OS 10.01 above without driver Note: VP2160 doesnt support Windows SP1 , SP2 , please upgrade to SP3 or above. Power Adapter / USB Cable / User's Guide / Driver Disc/Carrying Bag 0 C ~70 C -40 ~70 C 90% RH 230gr ( Included 2.5 HDD & battery pack ) 116 x78x23mm

Support Memory Card Interfaces SM, SD/MMC, MS ,MS Pro and CFType I/II,MicroDrive,
Hard Disk Size Hard Disk Capacity Power Source
Download interface Files System System OS
Accessories Operating Temperature. Storage Temperature Humidity Weight Dimension ( L*W*H )
1. Ports Connection and Buttons
RESET USB Port: Insert USB cord mini jack
CF card slot : For the CF card / Micro Drive insertion
SM ,Memory Stick, MMC/SD card slot: DC IN: Insert Ac adapter Jack
Power on /off Copy / Stop Copying
2. Using the Xs-drive II+
1) Charge the batteries Before using for the first time, charge the batteries for a full 4 hours. 2) Power On /Off Long press the Power button for 2 seconds. The green light will go on and the operating system will boot up. To shut off the unit, press the power button.

3. Driver installation

Windows Me and Windows XP Home Edition and Professional Edition ,Win2000 Professional SP 3 above.
Note: Please partition the Hard Disk first , then the Windows 98 Can recognize the Hard Disk.

4. USB CONNECTION:

When VP2160 begins connecting to the computer, the " HD TRANSFER " message will appear on the screen. During file transfer in the PC mode DO NOT : 1. Plug out the USB cable 2. Remove memory card(s) from the card slot, otherwise, there may be a chance of lost or corrupt data. 3. Keep the power supplier plugged if you are connecting to the laptop.
Note: a. When you connect to your laptop , please remember to keep the device plugged into the AC adapter or the secondary power source via USB cable b. To safely disconnect the VP2160 from computer, click on the system tray remove icon and wait until you get a message saying that you can safely unplug the device before disconnecting the USB cable.
5. Format Hard Disk under Win 2K/ Win XP
Due to Win 2K/ Win XP can not support Format Disk for 30G above Hard Drive. Please find the Application Program on the included CD-ROM. This program is a FDisk AP for Format Application Program. It has a simple interface which you can use it to format the Hard Disk.
Note : If you are using the new Hard Disk, please remember to Initialize the HDD first. Learn more about your partitioning and formatting options , please link to http://support.microsoft.com
Use the power adapter to avoid the device shuts off due to low power. Connect the device and PC with the provided USB cable Find the Application Program on the included CD-ROM. Follow then instructions to being formatting drives.

1.Type the drive letter 2.
Get Hard Disk Information.

3. Start formatting

6.Downloading or Editing the files on PC:
Power on the VP2160 Connect the VP2160 and PC with the provided USB cable Double Click the " My computer" icon , the operating system will display 4 icons identifying the media types orrespondingly. You can then read ,write,copy ,delete and remove data on the PC.
7. Data Transfer from Memory Card
Insert memory card(s) into the card slot.
Press the " COPY" button , files transfer function can be performed.
If the message [ COPY OK ] pop on the screen , it indicates the files are successfully copied And the HDD free memory will be displayed.
All files transfered from each memory card are stored onto the Hard Disk in folders numerically, under the name " CF0001 " , " MS0001" , "SM0001" , "SD0001". When the same card was inserted and copied twice, two different folders were created, VP2160 won't overwrite the folder. To stop the data transfer , just depress the Copy button and , the message [ COPY STOP] will pop on the screen , then you can switch off the device.
8. Auto Power off Function
_________________________________________________________________ 1) There is an auto screen- off function to save battery power.Thus if it is idle for 80 seconds ,It will shut off.

9. Battery Recharge:

_________________________________________________________________
1) To charge the batteries, please connect the plug of the AC adapter to DC 5V jack of the main unit. When the Power LED indicator goes off, it indicates that the batteries are fully charged. 2) Please use only the FUJIFILM NP-60 1100mA 3.7V rechargeable Li-ion battery. 3) For additional battery packs, please contact your dealer or you can purchase it at Digital Camera Stores.
10 If an erroneous display /operation occurs :
_________________________________________________________________ 1) When the device error message pop on screen , there may be a chance of corrupt data or the memory card is damaged , you can change another memory card. 2) If any shut down caused by erroneous operation , you can depress the [reset] button located on the left to switch off the main unit. 3) If the unit operated via USB on to PC while the batteries are low, erroneous display /operation may occur, if this happens ,unplug the USB cable, and press the [reset] button.
11. Care for the Hard Drive and unit :
_________________________________________________________________ 1) If the computer or VP2160 can not detect the Hard Drive, check the suggested solutions: Check the flat connector is plugged securely or not Driver is not install -then reinstall It is not recommended to format the 32G above Hard Disk under Windows 2000 or Windows XP Note: Win 2K/ Win XP can not support Format Disk for 30G above Hard Drive. 2) Please don't use force when connecting the flat cable with the unit and Hard Drive. 3) To keep your hard drive in better operating performance, we recommend to periodically run Scan Disk and Disk Defragmenter. 4) Hard Drive must be formatted to the FAT or FAT-32 format, NTFS format is not compatible with this function. 5) Please carefully insert and remove the memory card from each slot.

6) Do not drop, jar , bump , shock the unit , or expose to severe vibration while data is being transmitted. 7) To reduce the risk of electronic shock , do not remove cover (or back ) 8) To reduce the risk of fire or shock hazard, do not expose this equipment to rain , any liquid or moisture.

12. Troubleshooting.

WARNING Under no circumstances should you try to repair the system yourself, as this will Invalidate the warranty. Do not open the system as there is a risk of electronic shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints ,consult Your dealer or service center. Problem Solutions USB Connection issues Under Windows 98SE, the VP2160 should not be connected to the system before the driver has been installed. If using a USB port in the front of your computer, try a USB port in the back. Front USB ports are often from non-powered. If using a laptop computer and a docking station, try connecting without the docking station. If you cannot see the files on the device after copied files to VP2160 via USB from computer , You must properly remove ( un-mount) your VP2160 from the computer before disconnecting the USB cable to avoid loss of data or freezing the computer and VP2160. MacintoshTM OS issues MacOS 10.0.x does not adequately support FAT volumes. Upgrading to 10.1 or later is mandatory The FAT-32 format made by MacOS Xs Disk Utility is incorrect. Formatting must be done under MacOS 9. The FAT volumes do not appear or disappear until after the mouse is being moved. Corrupt data , General Error Due to file allocation table (FAT) has been corrupted, the data in memory card transferred into VP2160 may be looks faulty, please backup the data and run ScanDisk , Dsik Defragmenter or reformat the memory card.

Problem Solutions

Problems Solutions
Formatting, and partitioning To work in the stand-alone mode, both the disk and the memory cards must be formated to the FAT or FAT-32 file systems. Note: Win 2K/ Win XP can not support Format Disk for 32G above Hard Drive. To have the 32G above Hard Disk work on the Win 2K/Win XP, you can use the FDisk Application Program to format the HDD.

Hard Disk Assembly Chart

1. Remove the screws1~4.
2. To avoid bending the pins, carefully slide the HDD into the chassis,
3.Inside the accessories pack , you will see the spongy rubbers , stick the spongy rubbers underneath the back case to secure the assembly.
Battery Installation Chart

2. Remove the screws1~4.

2. To avoid bending the pins, carefully slide the battery into the chassis.
Thank you for choosing this product. If you experience problems with the VP2160 And cannot find answer in the previous troubleshooting sections , please contact your dealer. or check the updated firmware at www.vosonic.com.tw or mail to service@vosonic.com.tw

VOSONICXDRIVEVP8870SPECIFICATIONS

Specifications

Motion-JPEG Resolutionup to 720x480@30fps AudioPCM File formatMOV/AVI MPEG-1 Resolutionup to 720x480@30fps AudioMPEG1 File format.MPG/.DAT MPEG-2 Resolutionup to 720x480@30fps AudioMPEG1/AC3 File formatMPG/VOB/MOD Note: To avoid any Infringement of Copyright, this device is unable to play any DVD files with the encryption technology. Video playback MPEG-4 Resolutionup to 720x480@30fps AudioAAC/MPEG File formatMP4/MOV/AVI Note: VP8870 can not support H.264 format video XviD Resolutionup to 720x480@30fps AudioAAC/MPEG1 File formatAVI Note 1. The VP8870 may not read the videos created with codes other than above. If you have these other file types that you would like to view on your VP8870, you must use the video - editing software to re-encode them into the proper video codecs with supported sound stream. 2.The video formats above support bite rate up to 4Mb/sec. MP3 Sample rate48 KHz Bit-rate384 kbps File formatMP3 RemarkMPEG1-L1/2/3, MPEG2-L1/2

Audio playback

TECHNOBOX - 28 Peel Street, Mitcham 3132, Victoria Australia +- www.technobox.com.au
WAV Sample rate48 KHz Bit-rate1536 kbps File formatWAV Remarklinear, aLaw, uLaw, ADPCM, and GSM610 WMA Sample rate44.1 KHz Bit-rate320 kbps File formatWAV RemarkWMA 7/8/9 AAC Sample rate48 KHz Bit-rate320 kbps File formatM4A/AAC RemarkMPEG4 LC-AAC OGG Sample rate48 KHz Bit-rate320 kbps File formatOGG/FLC RemarkOgg Vorbis JPEG: Baseline TIFF: 1 and 8 bits grayscale, 8 bits indexed-color, 8 and 16 bits true color (Unsupport for compression format) BMP: Monochrome, 8 bits indexed-color, RGB, RLE8 GIF RAW: Support following camera models Canon: 1Ds Mark-II, 1D Mark II N, EOS 1D MARK III, EOS 1Ds Mark III ,EOS Kiss digital X, 1Ds, 1D-II, 1D, 5D, 5D mark II, 10D, 20D, 30D, D30, 40D, 50D, 300D(Digital Rebel, Kiss Digital), 350D, 400D, 450D,1000D,450D Kiss Digital X2 ,Digital Rebel XT, Power Shot G1/G2/G3/G5/G6/G9/G10 Nikon: D700, D300,D200, D100, D90, D80, D70, D50, D3, D1X, D2X, D1H,D3, D1, E5000 Kodak: DSC Pro SLR/c, DSC Pro SLR/n, DSC Pro 14n, P850, P880 Fujifilm: FinePix S2Pro, FinePix S3Pro, FinePix S5Pro, FinePix S5500, FinePix E900 Olympus: E-1,E-3, E-300, E-410, E-500, E-510, E4500, E20N,C5050WZ,C7070WZ,C8080WZ,SP500UZ,SP510UZ,SP550UZ Minolta: DiMAGE 7, A1, A2, A200, DYNAX 5D, DYNAX 7D, MAXXUM 5D, MAXXUM 7D Sony: R1, Alpha-100,Alpha 200,Alpha-700,Alpha-350,Alpha 900 Pentax: istD, istDL, istDS, K10D, K100D

Photo viewer

Panasonic : DMC-FZ30, DMC-FZ50,DMC-FZ18, DMC-LX1, DMCL1,DMC-L10 Contax: N Digital Sigma:DP1 LEICA: AG.R8, AG.R9,M8,V-LUX 1 Zoom IN/Out Rotate by 90 degree EXIF data Slideshow with background music Note: When use the zoom tool, if the enlargement is too big, it is possible that the pictures will look blurry. Compact Flash (CF) Memory Stick (MS) Secure Digital Card (SD) SD High Capacity (SDHC) MultiMedia Card (MMC) Mini-SD (with adapter) RS-MMC (with adapter) MS Duo (with adapter), MS Pro Duo (with adapter). Voice recording from line-in or internal microphone *AAC format Resolution: 320x240PSP 320x240Fine 640x480Normal 640x480Fine PAL : 720x576 Pixels NTSC :720x480 Pixels (Full-D1) Frame Rate: 20~30 fps TV Formats: NTSC & PAL Audio : AAC Bite Rate : Up to 4Mb/sec Format : MP4 PictBridge Compliant 2.5" 9.5mm Hard DiskSATA Interface) Hard Disk Size Hard Disk Capacity Display Note: VP8870 uses the FAT file system, the maximum size of a single file is usually limited to 2G. 40G ~ 500G 4.3 TFT LCD ,800x480 pixels
Support Memory Card Interfaces

Voice Recording

Video Recording

Direct Printing

Interface Built in speaker USB 2.Ohm up to 400mW 5V/2.5A DC IN Li-ion 3.7V 2500 mAh battery (NP-100 compatible) Non-Stop Photo backup: Approx. 40 times for CF 1G card Non-Stop Music playback: Approx. 10 hours (LCD off mode) Non-Stop Video playback: Approx. 2.5~3 hours

Power supplier

*The Li-ion rechargeable battery can be recharged approx. 500 times. *The times of backup will subject to the Hard Drive/ memory card/ Files type. *The battery life may vary with use. Remote Control IrDA,(Lithum Battery CR2025 3V x1) Windows 2000 SP3 above Windows XP / Windows Vista System OS Linux kernal 2.4 above Mac OS 10.0.1 above Operational Temperature 0 ~ 70C Weight 328gr (included 2.5" HDD & battery pack) Dimensions (WxLxH) 148x76x27mm (WxLxH) Analog AV-OUT composite RCA jack AV device TV system
Resolution : 640x480 Pixels Stereo earphone jack. PAL/NTSC (Interlace TV)