Owners Manual for model: BD-7181W
Deluxe Automatic Inflate Blood Pressure Monitor with Heart Sense
Made in Taiwan Walgreens c/o SAI 105 CHALLENGER ROAD, 6FL RIDGEFIELD PARK, NJ 07660 Toll Free Customer Service 1.800.261.0130 Large Three Row Digital Display 3 Zones of 30 Memory - 90 Memory Total Time and Date Pulse Display Memory Average of last 3 Measurements AC Capability and Adapter
Distributor: Walgreen Co. Deerfield, IL 60015
Heart Sense and Healthy Living are registered trademarks used under license from Samsung America, Inc.

In This Manual

Important Warnings/Medical Disclaimer ________________1 Healthy Living _________________________________2-3 Commonly Asked Questions ________________________4-7 Intended Use _____________________________________7 Accuracy ________________________________________8 Measurement Method_______________________________8 Special Conditions _________________________________9 Special Features ___________________________________9 Main Unit and Accessories___________________________10 Digital Display Symbols _____________________________11 Battery Installation ________________________________11 AC Capability and Adapter __________________________12 Selecting Time and Date ____________________________13 Important Reminders ____________________________14-15 Applying the Cuff _________________________________16 Taking a Blood Pressure Measurement ________________17-18 Storing Measurements _____________________________19 Recalling Stored Measurements ____________________19-20 Reset Function ___________________________________20 Taking Care of Your Monitor__________________________21 Troubleshooting ________________________________22-23 Limited Lifetime Warranty _________________________24-25 Specifications____________________________________26 Blood Pressure Diary_____________________________27-29
Important Warnings/Medical Disclaimer
Before using your blood pressure monitor, you should read and understand all instructions and follow all warnings. Information in this manual is provided for informational purposes only. This manual and product are not meant to be a substitute for the advice provided by your own physician or other medical professional. You should not use the information contained herein or this product for diagnosing or treating a health problem or disease, or prescribing any medication. If you have or suspect that you have a medical problem, promptly contact your healthcare provider.

Healthy Living

This blood pressure monitor is the first step to living a healthier life. But monitoring your blood pressure at home is just the beginning, its also important to: EXERCISE REGULARLY - Start out by taking a short walk each day. Before you know it, youll feel energized. Thats because along with being an easy way to shed a few pounds, walking also helps bones and hearts to become stronger. EAT RIGHT - Remember, you are what you eat! So when you reach for a snack, try grabbing a piece of fruit or a vegetable. When cooking meals at home try to use fats and oils sparingly. Sometimes a healthy diet is the best medicine of all! Its also a good idea to monitor your sodium intake because about one-third of individuals who have high blood pressure are also sodium sensitive.
BE HAPPY! - A positive attitude is a big part of a healthy body. Try not to get too stressed out over things. Daily relaxation techniques such as gentle yoga or even quiet time by yourself can do a lot of good for the mind and body. Stay focused on the good things in life. Begin by congratulating yourself for that short walk you just took or the smart food choice you made. Its your first step to a healthier life! KEEP AN EYE ON YOUR WEIGHT! - Surprisingly, losing even a small amount of weight can often times help control high blood pressure. Talk with your doctor to find a healthy weight for you and strive to come within a range of it. Remember to consult your physician prior to beginning exercise, vitamin/mineral/dietary changes or programs and blood pressure monitoring.

Commonly Asked Questions

Why Should I Monitor My Blood Pressure At Home? By monitoring at home, you can manage your health between doctor visits. Home monitoring also provides you with a record of blood pressure measurements over time to give to your doctor - a valuable tool in monitoring hypertension. Home monitoring may also help alleviate White Coat Hypertension. This term refers to the medical phenomena which causes many individuals blood pressure to be higher when taken in a medical office setting. Thats because many times the stress of being in the doctors office may cause blood pressure to rise as much as 20-50 points higher than normal. When monitoring at home, you can get a truer indication of your blood pressure in a normal, relaxed state. What Is Blood Pressure? The commonly used term blood pressure refers to the force or pressure that is exerted on the bodys arteries as blood flows through them. Each time the heart beats or contracts it produces pressure in the arteries. This blood pressure is what moves blood through the body, supplying oxygen and nutrients to every organ.
When the heart contracts it sends blood out into the body. This force of blood within the arteries is called systolic pressure. The pressure that remains as the heart relaxes between beats is called diastolic pressure. systolic diastolic pulse What Is Considered Normal Blood Pressure? The well-respected World Health Organization (WHO) has set forth the following guidelines regarding high (commonly referred to as hypertension), low and borderline blood pressure.

Hypertension

Borderline Normal
Why Does My Blood Pressure Fluctuate? Because blood pressure changes with every beat of the heart it is in constant fluctuation throughout any given day. In addition to these natural changes there are other factors that may affect blood pressure such as:
Why Is It Important To Control My Blood Pressure? Left uncontrolled, hypertension can place an incredible amount of stress on your heart and arteries, both of which become forced to work harder to keep blood flowing in a healthy manner throughout the body. Over time, this stress may result in health problems including over-enlargement of the heart, loss of elasticity of the arteries, heart disease, stroke, and even death. Making some simple lifestyle changes now may help you to stay healthy in the future.
Temperature (too hot or cold) Humidity Restlessness Lack of sleep Physical exercise Constipation Stress
Fear Anger Anxiety Food and beverage consumption Individual physical conditions

Intended Use

Walgreens blood pressure monitors are intended for home use. They are noninvasive, meaning no part of the monitor enters your body, and provide systolic, diastolic and pulse measurements. Walgreens monitors are recommended for use by people over the age of 18 and are not suitable for clinical use.

In addition to these factors you should talk with your physician to see what may be affecting you. How Do I Know I Have High Blood Pressure? Its nearly impossible to know if your blood pressure is elevated without having it checked. People have the common misconception that one can feel their blood pressure rise. It is because of this mystery that hypertension has been named the silent killer. Dont let it sneak up on you! Start monitoring your blood pressure every day with your new Walgreens monitor.

Accuracy

Walgreens monitors have been clinically tested against a scientific device called a sphygmomanometer, considered the gold standard in blood pressure measurement. All Walgreens monitors have performed equivalent to measurements taken with this scientific device and are within the accuracy limits prescribed by the American National Standard for Electronic or Automated Sphygmomanometers.

Special Conditions

All Walgreens blood pressure monitors are safe and accurate to use with arrhythmias such as atrial or ventricular premature beats and atrial fibrillation.

Special Features

This Walgreens monitor with Heart Sense technology senses your blood pressure before the measurement is complete - the monitor then adjusts the air pressure amount according to your individual level. The results are quick, comfortable measurements each time your check your blood pressure. Large Three Row Display A large LCD displays the time, date and your blood pressure systolic over diastolic - to make measuring your blood pressure easy to read. Memory Feature Your Walgreens Deluxe Automatic Inflate monitor features a 3 party memory capability or 3 "zones" - each zone stores 30 measurements for a total storage capacity of 90 measurements. This unique feature allows 3 users to use and store their blood pressure readings separately all on one monitor! Time and Date This monitor automatically keeps track of the time and date and remains on when the monitor is not in use for easy reference.

Measurement Method

Walgreens monitors measure blood pressure and pulse by using whats called an oscillometric method, meaning they measure the fluctuations in pressure. This is done by first wrapping a fitted cuff around the upper arm. The monitor then automatically fills the cuff with air creating pressure around the arteries inside of the arm. Mounted inside of the cuff is a special gauge that is capable of sensing the small oscillations (fluctuations) in pressure. These fluctuations are produced as a result of the pressure the cuff has placed around the arm and are, in a basic sense, the arteries pulsing (getting larger and smaller) with each heart beat. The monitor then measures how high and how quickly these pulses occur and converts that information into a digital value. A special valve, called an electrode, deflates the monitor automatically when the measurement is complete.

Main Unit and Accessories
Main Unit Date Time Systolic Diastolic

Digital Display Symbols

Month/Day Inflate Deflate
Hour/Minute Systolic Display

Replace Battery

Diastolic Display
Pulse Start/Stop Up Mode Accessories Memory Down
Error Symbol Memory Display Measuring Symbol Flashes During Measurement Pulse Display

Battery Installation

When the display shows , its time to replace the batteries. This monitor uses 4 "AA" alkaline batteries. Insert the batteries into the monitor making certain to align the polarities correctly.
4 "AA" Alkaline Batteries

X DE IN

Storage Pouch 9"~13" Regular Cuff
Close the battery cover securely. It will snap into place when it is fully closed.
* Its a good idea to remove the batteries if you know you will not be using your batteries for an extended amount of time.

AC Adapter

AC Capability and Adapter
This Walgreens blood pressure monitor is equipped with AC capability should you choose to use electric power instead of batteries to operate your unit. Use only the authorized AC adapter included with your monitor. Use of any other adapter may cause damage to the monitor and will void the user warranty. For warranty or replacement information refer to pages 24-25. AC Adapter Output: 6V DC 1A

Selecting Time and Date

Your Walgreens monitor will keep track of the time and date unless the batteries have run down or are removed from the monitor.
Press the MODE button on the unit. The month will begin to
(Up) or (Down) button until the flash. Press the correct month appears on the display.
Press the MODE button once again to store and now the
(Up) or (Down) day will begin to flash. Press the button until the correct day appears on the display.
Press the MODE button to store and the hour will begin to
flash. Follow the same process as setting the month and day to set the hour and minute.

*It is suggested that you remove the batteries from the compartment if you are going to use an AC adapter for an extended amount of time.
Once you have selected the minute, press the MODE
button. The unit will now display the time and date.

Important Reminders

Here are some important reminders: Before Taking a Measurement
While Taking a Measurement
Take your blood pressure in a comfortable environment not too cold, not too hot - as temperature may affect your measurement. such as coffee, non-herbal tea, or cola wait about 30-45 minutes. Also, don't smoke just before taking a measurement.
Sit quietly for about 10 minutes. This will allow your body to return to its normal, resting state.
Sit with your legs uncrossed and your feet flat on the floor. For consistency, it's a good idea to measure your blood
pressure using the same arm and at about the same time each day. If possible, we suggest using the left arm.
Relax. Sit still and quietly while measuring. Talking or
If you've just consumed beverages containing caffeine
TIME. SYS g mmH DAT E DIA. g mmH
moving may elevate measurements. Do not touch the cuff or monitor during the measurement.

SE PUL. /MIN

taking When to waitmultiple measurement right after each other, make at least 8-10 minutes in between. Waiting allows your blood vessels to return to their normal state.
Insert the cuff plug into the monitor before taking a

measurement.

MEMORY
assemble, insert the end of the cuff marked INDEX into the metal ring with the velcro side facing out. The smooth material should be on the inside of the cuff loop.
Make sure the cuff is properly assembled before use. To

PULSE /MIN.

SYS. mmHg

DIA. mmHg

Applying the Cuff
1.If your arm measures 9"-13" around, use the regular cuff included with your monitor. If your arm measures 13"-17" around, please use a Walgreens Large Cuff (Model #BC-200W). 2.Before taking a measurement, read the Important Reminders on pages 14-15. Make certain the cuff plug is inserted securely in the monitor and the cuff is assembled properly. Remove any constricting or thick clothing from your upper arm. 3.Slide your arm through the cuff loop. The cuff should be positioned on your bicep about 1/2" above the elbow. With your palm facing up, the red arterial marker should be in the center of your arm over the brachial artery. The cuff tube should run down the center of your arm. Instructions are also printed on the cuff for reference. 4.Secure the cuff around your arm using the velcro so it fits securely but is not too tight. You should be able to place 2 fingers in between the cuff and your arm. 5.The velcro tab should fall within the "OK" range printed on the cuff for proper use. If your arm is larger than 13" around and the cuff does not fall within the "OK" range, please use a Walgreens Large Cuff (Model #BC-200W). 6.Relax your arm and place your elbow on the table.

Taking a Blood Pressure Measurement
1.Once the cuff is properly applied and you are seated with your
feet flat on the floor you are ready to take a measurement.

2.Press the

(Up) or (Down) button and you will see a number appear: 1,2, or 3. These are each of the 3 party memory zones explained on page 9 (Special Features).

0.8" - 1.2"

*If you select zone No. 1 your blood pressure will be recorded as one of the 30 readings available for that zone. The same is true for zones 2 and 3. When taking measurements, be sure and select the correct zone number so that the measurement is stored in the appropriate zone.
3.Press the START/STOP button. The monitor will begin to
inflate to the level that's right for you. An upwards facing arrow on the digital display indicates the monitor is inflating. Remain still and do not talk during the measurement process.
4.You will feel the cuff get tighter around
your arm - this is normal. It should not inflate to the point of discomfort. If this occurs, the cuff may be secured too tightly. To stop the inflation, press START/STOP. The cuff will deflate automatically. Rewrap the cuff allowing more room between your arm and the cuff.

Inflation 17

ST AR T/S

M EM Y OR

5.Inflation will stop automatically to begin

Storing Measurements

When you take a measurement the monitor automatically stores it in memory space number one. As you continue to take measurements the monitor will push the previous measurement back one space. In other words, the value in space one will always be the most recent blood pressure measurement taken. Your monitor features a 3 party memory capability or 3 "zones" each zone stores 30 measurements a for a total memory capacity of 90 readings. This unique feature allows 3 users to use and store their blood pressure measurements separately all on one monitor. This feature is also useful for one user to track their blood pressure throughout the day: morning, afternoon, and evening.

the measurement process. You will see a downward facing arrow and the numbers decreasing as the cuff is deflating. You will also see a flashing heart to indicate the measurement is taking place. Note: Occasionally, to get an appropriate measurement, the monitor may reinflate the cuff to 30mmHg higher than the previous inflation and begin the measurement process again.
6.When your measurement is complete the

Deflation

monitor will deflate automatically, releasing the air pressure in the cuff.
7.The entire measurement process should take less than a
Recalling Stored Measurements

1.Press the

minute. Your blood pressure and pulse readings are displayed and automatically stored in the memory.
* The monitor will automatically power off after about one minute.
NOTE: Blood pressure constantly changes during the course of a day. Occasionally, high or low readings do not necessarily mean your monitor is malfunctioning or that you are ill. It is important to speak with your doctor to learn what your normal blood pressure is if you experience abnormal measurements.
(Up) or (Down) button to select a user zone. You will see a number appear: 1, 2, or 3. (Fig. 1) 2.Press the MEMORY button and the average of the last 3 readings will be displayed for that zone. For example, if you select zone No. 1 and you press MEMORY, the average of the last 3 measurements stored in zone No. 1 will appear on the display. (Down) to view the next stored measurement; press 3.Press (Up) to go back to the previous measurement. 4. To go back to the main screen for "Recalling Stored Measurements" and to choose another zone, press (Up) to scroll through the measurements until you reach the most recent measurement and press once more. You can also press START/STOP to return to the main screen. 19
5.Follow steps 1-3 once again to review measurements in
Taking Care of Your Monitor
Its important to treat your monitor with care. Here are some basic tips:

another zone.

*Fig.1

*Fig.2

Reset Function
Your Walgreens monitor will not lose the data stored in the memory even when you change the batteries. To erase all of the data in memory zone, refer to the instructions below. Note: Single measurements cannot be erased. Warning: Resetting the memory will permanently erase all of the stored data in the memory zone that you select. Press (Up) (Down) to choose a zone: 1, 2, or 3. Press the MEMORY button. (Fig. 3) Press the MODE and (Up) button at the same time to clear all of the stored data. (Fig. 4)
Keep the monitor out of direct sunlight, high humidity and extreme temperature changes. Try not to drop it on the floor. None Do not take the monitor or the cuffIf apart.monitor of the monitors parts are fixable at home. your needs Keep the monitor free of dust and other materials. Avoid Do not harshly fold or bend the cuff as this may damage it on the inside. Do not inflate the monitors cuff if it is not wrapped around your arm. Always remove the cuff tube from the monitor with care. For your safety, do not wrap the cuff around any other

body part other than your arm. getting any part of the monitor or cuff extremely wet. If the monitor needs cleaning its best to wipe it with a cloth slightly dampened with water. We recommend that you clean your monitor about once a month. repair, see details in the warranty section of this manual.

*Fig.3 20

*Fig.4 21

Troubleshooting

Error/Symbol What Does It Mean?
Monitor may have been inflated without the cuff around the arm OR Cuff may not be positioned correctly on the arm. The cuff tube may be folded OR You may have moved while the cuff was inflating.
How To Fix It Error/Symbol What Does It Mean?
You have been ignoring the flashing replace battery symbol ( ).

How To Fix It

Replace with four new "AA" alkaline batteries. Make sure the polarities are positioned correctly in the battery compartment before continuing to measure your blood pressure. Replace with 4 "AA" batteries so you may continue to measure your blood pressure without any interruptions. Read page 16 (Applying the Cuff). Remove then reinsert the batteries and then proceed to take measurement again. Read page 16 (Applying the Cuff).
Read page 16 (Applying the Cuff).
Read pages 14 & 15 (Important Reminders). The batteries have run down.
You may have moved or spoken during the measurement process.
Remember that it is important not to move and speak as it may elevate measurements. Make sure you are in a quiet and comfortable place when taking a measurement.
Blood pressure value seems too high or too low Blood pressure value seems too high or too low
Cuff may not be aligned correctly. Circuitry locked.
You may have been startled by a noise or vibration while measuring.
Unable to take a The cuff may not be measurement after positioned correctly. receiving an error symbol.

Specifications

Model Monitor Type Measurement Method Display Measurement Range Accuracy Memory Automatic Power Off Battery Type Battery Life Storage Temperature Operating Temperature Dimensions (approx.) Weight (approx.)

Blood Pressure Diary

Date Time Systolic/Diastolic / / / / / / / / / / / / / / / / / / /
BD-7181W Deluxe Automatic Inflate Oscillometric Liquid crystal digital display Pressure: 0-260 mm Hg Pulse: 40-199 beats/Minute Pressure: within 3mm Hg Pulse: within 5% Stores up to 30 measurements for each zone (90 memory total) About 1 minute after measurement is complete 4 AA batteries (Alkaline) About 6 months when used once a day, less when using a large cuff Temperature: -4F to 140F Relative Humidity: less than 95% Temperature: 50F to 104F Relative Humidity: less than 95% Monitor: 4 3/4" (w) x 5 1/8" (d) x 2 7/8" (h) Regular Cuff: fits arms 9"-13" around 14 oz (including batteries)