WellGate3804UserManual
S/Wversion:4fxo.115 Releaseversion,:2.4

Notice

Copyright2002WelltechComputerCo.,Ltd. AllintellectualpropertyrightsinthispublicationareownedbyWelltechComputer Co.,Ltd.andareprotectedbyRepublicofChinacopyrightlaws,otherapplicable copyright laws and international treaty provisions. Welltech Computer Co., Ltd. retainsallrightsnotexpresslygranted. Nopartofthispublicationmaybereproducedinanyformwhatsoeverorusedto makeanyderivativeworkwithoutpriorwrittenapprovalbyWelltechComputerCo., Ltd. No representation of warranties for fitness for any purpose other than what is specificallymentionedinthisguideismadeeitherbyWelltechComputerCo.,Ltd. oritsagents. WelltechComputerCo.,Ltd.reservestherighttorevisethispublicationandmake changes without obligation to notify any person of such revisions or changes. WelltechComputerCo.,Ltd.maymakeimprovementsorchangesintheproduct(s) and/ortheprogram(s)describedinthisdocumentationatanytime. If there is anysoftware on removable media described in this publication, itis furnished under a license agreement included with the product as a separate document.Ifyouareunabletolocateacopy,pleasecontactWelltechComputer Co.,Ltd.andacopywillbeprovidedtoyou. Unless otherwise indicated, Welltech Computer Co., Ltd. registered trademarks areregisteredintheRepublicofChinaandotherterritories. Forfurtherinformation,contactWelltechoryourlocaldistributororreseller. WelltechComputerCo.,Ltd. 13F4,No.150,JianYiRoad,ChungHoCity, Taipei,Taiwan235,R.O.C. Tel:+886282265699 Fax:+886282265799 Email:sales@mail.welltech.com.tw http://www.welltech.com.tw

WellGate3804UserManual

Table of Contents
1.INTRODUCTION.....4 1.1FEATURESANDSPECIFICATION....4 1.2APPEARANCE....6 2.SYSTEMOPERATINGPROCEDURE....7 2.1SYSTEMREQUIREMENT.....8 2.2TELEPHONELINEREQUIREMENT....10 2.3IPENVIRONMENTSETTING.....10 2.4HYPERTERMINALSETTING.....11 3.INITIALIZINGWELLGATE3804SETTING...13 3.1GATEKEEPERMODE.....13 3.2PEERTOPEERMODE.....16 3.3BEHINDIPSHARING....17 4.DISCONNECTTONECONFIGURATION...19 4.1WHATISDISCONNECTTONE....19 4.2HOWTOCONFIGUREDISCONNECTTONEONWELLGATE3804GATEWAY..20 4.3ADJUSTTONETABLEPARAMETERSMANUALLY....21 4.4ADJUSTINPUTTONELEVEL....21 5.COMMANDLISTS.....22 5.1[HELP]COMMAND.....22 5.2[QUIT]COMMAND.....22 5.3[DEBUG]COMMAND....22 5.4[REBOOT]COMMAND....23 5.5[FLASH]COMMAND....23 5.6[COMMIT]COMMAND....23 5.7[IFADDR]COMMAND.....24 5.8[TIME]COMMAND.....25 5.9[PING]COMMAND.....25 5.10[GREETRD]COMMAND....25 5.11[PBOOK]COMMAND....27 5.12[SYSCONF]COMMAND....29 5.13[H323]COMMAND.....32 5.14[GK]COMMAND.....34 5.15[VOICE]COMMAND.....35 5.16[TOS]COMMAND.....36 5.17[TONE]COMMAND....37 5.18[SUPPORT]COMMAND.....38 5.19[GROUP]COMMAND....39 5.20[BUREAU]COMMAND.....40 5.21[PREFIX]COMMAND....41 5.22[ROM]COMMAND.....41 5.23[PASSWD]COMMAND.....43 6.UPGRADETHEWELLGATE3804....44 TFTP/FTPSERVER.....44 DOWNLOADPROCEDURE.....44

1.Introduction

TheWellGate3804gatewayprovidesvoice/faxserviceoverIPnetworkwith H.323 v3 protocol. By connecting to your existing ADSL or cable modem service,whichallowstheuseofasingle,networkforvoiceandfaxservices with consequent saving in network infrastructure and greatly reduced telephone charges. Ideal solution for providing low cost communications betweenheadquartersandbranchofficesintheworld,aswellasforSOHO andofficetelephonyapplications. WellGate 3804 provides 4 ports analog line to connect local PSTN/PTT interface (FXO), and converts voice/fax signal onto IP network. The managementfeatureisviaRS232CCOMportandTELNET.

TwokindsofanaloglinescanbeconnectedtoRJ11ofWellGate3804. 1. PSTN(PublicSwitchedTelephoneNetwork,POTS)or 2. PABX(PrivateAutomaticBranchExchange)/PBX(PrivateBranch Exchange)extensionline. PSTN 1. ItisnecessarytoprovidePSTN/POTStelephonelinesinordertopluginto RJ11ofWellGate3804. 2. Themaximumtelephonelinesareupto4. PABX/PBX 1. 4PSTNlinescanbereplacedtothe4extensionlinesofPBX. Note:SincetheLinefunctionfeaturestartsfromL1,pleaseplugthe telephonelinesfromL1toL4.
UsermustprepareavalidIPaddresstobecompliedIPNetworkpolicyin orderforWellGate3804operatingcorrectly. Forexample,ifyourcompanysIPaddressis192.168.4.111,subnetmaskis 255.255.0.0,defaultgatewayis192.168.1.254,youshouldprepareoneIPfor WellGate 3804,such asIP addressis192.168.4.99,and the same subnet maskanddefaultgateway.

2.4HyperTerminalSetting

1. ExecutetheHyperTerminalprogram,thenthefollowingwindowspopup onthescreen.(STARTProgramfilesAccessoriesCommunication HyperTerminal)
2. Defineanamesuchas3804Gatewayforthisnewconnection.
3. AfterpressingOKbutton,thenextwindowpoppingupisnecessaryto connectchooseCOMPort.
Note: SomeconnectionfailedisderivedthePCCOMPort.Ifusercannot openthecomport,forexamplecom1,pleasetryanothercomport, comport2.
4. ConfiguretheCOMPortPropertiesasfollowing: (1) Bitspersecond:9600 (2) Flowcontrol:None
PressOKbutton,andstarttoconfigureWellGate3804.
3.InitializingWellGate3804Setting

3.1GatekeeperMode

(a)ConfigureWellGate3804Password
(b)ConfigureWellGate3804IPAddress
(c)GatekeeperModeSettings
(d)SaveWellGate3804Configuration &RebootWellGate3804
(a) ConfigureWellGate3804Password
Itisimportantforthefirsttimeusertofollowtheoperationprocedure. 1. PowerontheWellGate3804andthesentencePleasewaitwhilesystemis initializingSisdisplayed.
Attached TCP/IP interface to cpm unit 0 Attaching interface lo0.done
Please wait while system is initializing.. S
2. Waitaround40seconds,theloginnameandpasswordarerequested.
Attached TCP/IP interface to cpm unit 0 Attaching interface lo0.done AC4804[0] is OK AC4804[1] is OK AC4804[2] is OK Successful Initialize OSS libraries.OK! open stack successful cmInitialize succeed! GK mode selected. login:
3. Login:whenWellGate3804isusedforthefirsttime,rootisdefaultlogin namewithoutapassword. 4. Passwordsetting:typepasswdsetroot****todefineapasswordfor rootaccount.****,inabovedescription,standsforcontentsofthe password.Anexample,tosetrootspasswordasgood,isdemonstrated asfollowing:
usr/config$ passwd -set root good Setting login: root Password: good OK
(b)ConfigureWellGate3804IPAddress Use ifaddr command to set up WellGate 3804s IP address and related networkinformation.Anexampleisdemonstratedbelow:

192.168.1.5.

4.DisconnectToneConfiguration
Thisapplicationnoteisgoingtodescribetheproceduresofconfiguringthe disconnecttoneonWellGate3804FXOgatewayinordertoreleaseLINEportsof WellGate3804afterPSTN/PBXcallerpartyishungup.

4.1WhatisDisconnectTone

IPSide WellGate 3804 PSTNside PSTNor PBX

IP Network

OtherVoIP devices

Caller

AcallermakeatelephonecalltoGatewayfromPSTNside,WellGate3804will answerthecallautomatically.IftheIPsideofotherVoIPdevicesdonotanswer the call and the caller hang up the call, the PSTN/PBX will give Gateway a disconnecttoneautomatically.Or,bothdevicesareinstalledwithWellGate3804 andconnecttolocalPSTN.Ifbothpartiesareintalkmode,onesidehangupthe call the WellGate has to recognize the disconnect tone from local PSTN. The WellGate3804gatewaywillrecognizethisdisconnecttoneandreleasetheLINE portwiththepredefinedbusytoneorreordertonefromWellGate3804tonetable. IftheotherVoIPdeviceofIPsidehangsupthephone,thegatewaywillrelease theLINEportautomaticallywithoutanalyzingdisconnecttonefromPSTN/PBX. TherearethreeparametersreceivedfromPSTN/PBX. HighlevelfrequencyandLowlevelfrequency ToneCadence(ON/OFFintervals) Tonelevel TheseparametershavetobeproperlyconfiguredtoWellGate3804inorderto recognizedisconnecttonecorrectly.EachdifferentPSTN/PBXhavedifferent parameters.So,WellGate3804hastoconfiguretonetablewhenLINEport connecttodifferentPSTN/PBX.
4.2HowtoconfiguredisconnecttoneonWellGate3804gateway
WellGate3804hasadefaultsettingofdisconnecttone(Busytone1,Busytone2, reorder tone 1 and reorder tone 2 ). If the disconnect tone was recognized correctly, the LINE port from PSTN/PBX will be released in two seconds. OtherwiseitmaybereleasedafteroneminuteorlockthisLINEpermanently. Thetonetableparametersareshownasfollows. LowFreq480:Lowfrequencyis480HZ HighFreq620:Highfrequencyis620HZ LowFreqLevel8:LowfrequencylevelreceivedrangefromPSTN/PBX HighFreqLevel8:HighfrequencylevelreceivedrangefromPSTN/PBX TOn150:DisconnecttonecadenceONtimeis0.5seconds TOff150:DisconnecttonecadenceOFFtimeis0.5seconds (Ifthisiscontinuoustone,theToffhastosetto1023) TOn21023:DisconnecttonesecondcyclecadenceONtimeis OFFTOff21023:DisconnecttonesecondcyclecadenceOFFtimeis OFF (Ifthetonecadencehasonlyonecycle,thesecondcyclemustsetto1023) (1)ExampleshowtoconfigureTonetable a.480/620frequencywithON/OFFtimeis0.5seconds tonebusy148062088505010231023 b.480HZsinglefrequencywithcontinuoustone tonereorder248008050102310231023 (2)Therearetwowaystoanalyzethedisconnecttone. a. ThefirstoneisusingcommandgreetrdfromWellGate3804.Onceyoufollow theinstructiontoanalyzethedisconnecttone,Gatewaywillconfigurethetone table(Busytone1,Busytone2,reordertone1andreordertone2)withproper frequencyanddefaulttonelevelandcadence(Ton1/Toff1)automatically.Or youmayreadtheanalysistonefrequencyfromcommandlineandconfigureto oneoftonetablemanually. Thedefaulttonelevelissetto8.Andthetonecadence(Ton1/Toff1)issetto four differentvaluesontone table.Theyare0.1second,0.25seconds,0.5 secondsand0.75secondswithparameters10/10,25/25,50/50and75/75. IfthePBX/PSTNcadenceisnotthevalueasdefaultshownasabove,you needtousethefollowinginstructiontoanalyzeON/OFFintervals. b.YoumayuseyourPC(START ProgramFiles Accessories Multimedia Recorder) with Headset or Microphone to record the disconnect tone via a telephone set from PSTN/PBX and save to a voice file. Then you can use

CoolEditProsoftwaretoanalyzethefrequencyandON/OFFtime.Pleasevisit http://www.cooledit.comtodownloaddemoversionforanalysis.Youcanusethis programtoanalyzeON/OFFtimeandfillintotonetable.
4.3AdjustToneTableparametersmanually
IfthegatewaystillcannotreleasetheLINEportintwoseconds,trytoadjustthe frequencyby1hzontonetable.Forexample,youranalysisvalueis620/480,take thefollowingprocedures. 620/479 620/480 620/481 621/479 621/480 621/481 619/479 619/480 619/481 If the LINE port of gateway was locked, please use hangup 0 command to releaseLINE1,hanhup3toreleaseLINE4.

4.4AdjustInputToneLevel

SometimesthedisconnecttonelevelistoolowtodetectbyWG3804.Youcan increaseinputgainfromthefollowingcommand. voicevolumeinputxx commit reboot xyistheinputgainparameters.Themaximumnumberis35.ifthenumberisover 35,theechomaybehappened.Onceyouincreaseinputgain,thevoicevolume fromPSTNtoIPsideisincreasedtoo.

5.Commandlists

5.1[help]command
Typehelpormanor?tolistalltheavailablecommand.
usr/config$ ? help help/man/? [command] quit quit/exit/close debug show debug message reboot reboot local machine flash clean configuration from flash rom commit commit flash rom data ifaddr internet address manipulation time show current time ping test that a remote host is reachable greetrd Greeting voice and Disconnect tone Record mode pbook Phonebook information and configuration sysconf System information manipulation h323 H.323 information manipulation voice Voice information manipulation gk H.323 gatekeeper manipulation tos IP Packet ToS (Type of Service)values tone Setup of call progress tones support Special Voice function support manipulation group Grouping setting information and configuration bureau Bureau line information manipulation prefix Prefix information manipulation rom ROM file update passwd Password setting information and configuration usage: help [command]

5.2[quit]command

TypequitwillquittheWellGate3804configurationmode.Andturnbackto loginprompt.
usr/config$ quit Disconnecting. login:
Note:Itisrecommendedthattypethequitcommandbeforeyouleavetheconsole. Ifso,WellGate3804willaskpasswordagainwhennextuserconnectstoconsole port.

5.3[debug]command

OpendebugmessagewillshowupspecificinformationwhileWellGate3804 is in operation. After executing the debug command, it should execute commanddebugopenaswell.Oneexampleisdemonstratedbelow.
usr/config$ debug -add h323 vp usr/config$ debug -open
ParametersUsage: status Displaytheenableddebugflags. add Adddebugflag. h323:h323relatedinformation vp:voicerelatedinformation delete Removespecifieddebugflag. open Starttoshowdebugmessages. close Stopshowingdebugmessages.

2. DisconnectToneAnalysis:pleasefollowinstructionsonscreen;firstcall inline1ofWellGate3804fromPSTNside(nowcantheargreeting),hang upthephoneandpressentertostartrecorddisconnecttone.Finally, choosey/ntosavedataanalyzedornot.Noticethatsystemwillsaveone setoffrequencyanalyzedand4setdifferenton/offtimein busytone1,busytone2,reordertone1,reordertone2(Pleasereferto tonecommand). IfWellGate3804stillcanthangupcallcorrectly,itcouldbetonecadence issue(on/offtime).Pleasecounton/offtimeandconfigureitintotone command. ------------------------------------------------------------------------------------------------------------usr/config$ greetrd
WellGate3804UserManual ================================================= = Welcome to Voice Record/Analysis Mode -------------------------------------------------1.Greeting Voice Record. 2.Disconnect Tone Analysis. 3.exit. -------------------------------------------------Please input function(1~3): 2 2.Disconnect Tone Analysis. Please Dial-in "Line 1" and then Hang up the phone!!! Press "Enter" to start record!!! Waiting for Disconnect Tone from PSTN. Disconnect Tone Detected. Starting Record. Set parameters to flash? (Y/N)
3. exit:exitthiscommand ------------------------------------------------------------------------------------------------------------usr/config$ greetrd ================================================= = Welcome to Voice Record/Analysis Mode -------------------------------------------------1.Greeting Voice Record. 2.Disconnect Tone Analysis. 3.exit. -------------------------------------------------Please input function(1~3): 3 Are you sure to EXIT?!(y/n): y usr/config$

5.11[pbook]command

PhoneBookfunctionallowsuserstodefinetheirownnumbers,which mappingtorealIPaddress.Itiseffectiveonlyinpeertopeermode.When addingarecordtoPhoneBook,usersdonothavetorebootthemachine, andtherecordwillbeeffectiveimmediately.
usr/config$ pbook Phonebook information and configuration Usage: pbook [-print [start_record] [end_record]] pbook [-add [ip ipaddress] [name Alias] [e164 phonenumber]]
S/Wversion:4fxo.115 WellGate3804UserManual Releaseversion,:2.4 pbook [-search [ip ipaddress] [name Alias] [e164 phonenumber]] pbook [-insert [index] [ip ipaddress] [name Alias] [e164 phonenumber]] pbook [-delete index] pbook [-modify [index] [ip ipaddress] [name Alias] [e164 phonenumber]] -print Display Phonebook data. -add Add an record to Phonebook. -search Search an record in Phonebook. -delete Delete an record from Phonebook. -insert Insert an record to Phonebook in specified position. -modify Modify an exist record. Note: If parameter 'end_record' is omited, only record 'start_record' will be display. If both parameters 'end_record' and 'start_record' are omited, all records will be display. Range of ip address setting (0.0.0.0 ~ 255.255.255.255). Range of index setting value (1~100), Example: pbook -print pbook -print 1 pbook -print pbook -add name Test ip 210.59.163.202 epbook -insert 3 name Test ip 210.59.163.202 epbook -delete 3 pbook -search ip 192.168.4.99 pbook -modify 3 name Test ip 210.59.163.202 e164 1001

ParameterUsages: print printoutcurrentcontentsofPhoneBook.Userscanalsoaddindex number,from1to100,totheparametertoshowspecificphone number.
Note:<indexnumber>meansthesequencenumberinphonebook.Ifusers dorequestaspecificindexnumberinphonebook,WellGate3804will giveeachrecordaautomaticsequencenumberasindex.
search delete insert modify
addanewrecordtophonebook.Whenaddingarecord,usershave to specify name, ip, and e164 number to complete the command. searcharecordinphonebook.Thesearchingcriteriacanbename, ip,ore164. delete a specific record. pbook delete 3meansdelete index 3 record. addanewrecordandforcetoassignaspecificindexnumberforit. modifyanexistingrecord.Whenusingthiscommand,usershaveto specifytherecordsindexnumber,andthenmakethechange.

PhonebookRules:

To meet the requirements of communicating with trunk gateway or other applications,Phonebookhasfollowingcharacteristicstobenoticed. Whenthedestinationsideisaterminal,forex:IPPhoneorsoftphone,e164 numberstandsforexactdestinationphonenumber. When the destination side is a gateway, for ex: T1/E1 gateway, e164 phone numberstandsonlyforgatewayprefix.Thatistosay,usershavetocontinuetodial destinationnumber,followingtheprefixnumber.Aexampleisasbelow: A WellGate3804 InPhonebook,theresarecord:
1 B_gateway 192.168.1.B E1trunkgateway,whichconnectstoPSTNwithE1PRI. IfuserswanttomakeacalltoPSTNnumber82265699,theyhavetopickuponeof thephoneconnectedtoWellGate3804,andthendial082265699.Afterreceiving thecompletedialednumber,WellGate3804willsearchforitsPhoneBook,find0 asmatchedprefix,andthendialouttoBsIPaddressdirectlywithdestinatione.164 (phonenumber)82265699.Pleasedbenotedthat0iseliminatedfromWellGate 3804itself. Note:1.Becauseofabovecharacteristics,usershavetotakecareofthenumberplan verywelltoavoidthe numberingconflict.If users alreadydefined0 for specifictrunkgateway,otherterminalstartedwith0shallbeavoided,orthe numberwillberoutedtothetrunkgatewaydefined0. 2.Ifuserwantstoset2setsofsimilare164suchas123and1234,pleasebe careful configure 123 first, or it may cause problem when user dial 1234, WellGate3804maydialsoutIPaddressof123. 3. (1) IfcalledpartyisFXOproduct,pleasesete164ofpbookase.164ofcalled party,andremembertosetsysconfdrulein_drope.164(referto5.12.)in calledparty. (2) IfcalledpartyisFXSproduct,pleasesete164ofpbookasprefixofcalled party,whendialingtodifferentlineofFXSproduct,pleasediallinenumber.

service: 0 DialInService in Dial In Service, Wellate3804 will pick up incoming calls from PSTN,playprerecordedvoicegreetingor,andthenhaveusersto makea2nddialtodestination. 2 HotLine/LineToLineService(thisfeaturemustbeimplementedin a pair of FXO products in P2P mode and set bureau table command) HotLineServiceprovidesHotLinefunction,whichconnectsdirectly topredefineddestination.Forex:ifL1ofWellGate3804isassigned todestinationaddress192.168.1.12inHotLineMode.Whenusers from PSTN make a call to L1 of WellGate 3804, it will directly connectto192.168.1.12withouta2nddial. Note:Inhotlineservice,mustsetWellGate3804sysconf2nddial0. LineToLineServiceislikeHotLineService,butaskforaspecificline number.Forex:ifL1ofWellGate3804isassignedtodestination address192.168.1.12/Line4inLineToLineMode.Whenusersfrom PSTNmakeacalltoL1ofWellGate3804,itwilldirectlyconnectto 192.168.1.12andchooseLine4tocallouttoPSTN.Thisismostly
appliedtoITSP,whoprovidesinternationalVoIPsolution.
Note: In LineToLine service, must set WellGate 3804 sysconf 2nddial1. ringdet:todefineringdetectionmethod.(0isforoldhardwareversion;1for newhardwareversion) plan:Itisforsettingdialnumberingplan.Whilee164numberisthreedigits, theplanshouldbesetas3or0.Theplan0isforanypositivedigits use. port:Thiscommandcanenableordisableindividualport.Thedefaultvalue issettoenableallports. seizure:lineseizuremode. None(0) whencallingfromIPside,chooseL1everytimeifitis available. UCD(1) whencallsfromIPside,chooseL1forthefirsttime,andL2 forthe2ndtime,(cyclic) Note:Donotenablethisfunctiontogetherwithgroup(pleasereferto5.18). 2nddial:Thiscommandisnecessaryforsettingonetimedialmethoduse. Whileuserwouldliketoskip2nddialprocess,WellGate3804must close2nddialandsetas0(2nddialoff).Thedefaultvalueissetas1 (2nddialon). drule:Thiscommandonlyworkswhile2nddialisoff.Whenuserwouldliketo make an outgoing call or receive an incoming call shortly, it is necessarytosetthefollowingthreecommandsbelongedtodrule. drop:dropthedialdigit. insert:insertthedialdigit filter:filterthedialdigit. Note: 1. out:ThroughWellGate3804todialouttoanotherGatewayse164 number.Whenmakinganoutgoingcall,itisnecessarytosetthree commandsinorder,filter,insertthendrop. Example:sysconfdruleout_filter002886out_insert0out_drop02 2. in:ThroughpassWellGate3804inordertoconnectwithPSTN/PBX side.WhenmakinganincomingcallfromotherGateway,thethree commandsisnecessarytobesetinorder,drop,insert,thenfilter. Example:sysconfdrulein_drop002886in_insert0in_filter02 3. 3.Whilethespecifieddigitwouldliketobedeleted,usethecharacterx insteadofanydigitshaveconfigured. askpin: 0 disablesASKPINfunction 1 enablesASKPIN function, and applyto the whole unit. Every channelusesthesamePINCODE. 2. enables ASKPIN function, and apply to each channel

respectively.Everychannelusesadifferentpincode. ring:TosetwhendialinWellGate3804fromPSTNside,WellGate3804will pickthecallimmediatelyorringsforspecifictimesbeforepicksup. 0 disable:pickupimmediately 15 timesofringbeforeWellGate3804picksup. callalive:CallAlivefunction(1=ON;0=OFF).Thefunctionisusedtocheck iftheoppositepartyisalivewhenconnectionisestablished.When CallAlive is activated, WellGate 3804 will send H.245 RoundTripDelaymessagetootherparty,andwaitforresponse.Ifthe otherpartycannotrespondthemessagein10seconds,WellGate 3804willregardtheoppositepartyasIDLEstateanddisconnectthe call.WhenCallAliveisdeactivated,RoundTripDelaymessagewillnot besentduringconnection. keypad:keypadtypewhenrelayDTMFsignal. 0 InBand 1 h.245alphanumeric 2 h.245signaltype 3 q.931userinfo pincode:tospecify2setsofpincode. sendxcode:sendaccesscodeafterconnection(1=ON;0=OFF) access:specifyaccesscodes(perportbasis). Note: 1. ThisfeaturecanonlyimplementwithLineToLineservice.Pleaserefer toserviceabove. 2. Thisfunctioncanhelpuserstorestrictcallerstodialparticular numbersfromIPsidetoPSTNside.Forexample,ifusersetsysconf accessset11111,whencallerscallfromIPsideandenterWellGate 3804port1,ifuserdial234afterhearingdialtone,WellGatewilldial out1111234.
usr/config$ sysconf sendxcode 1 access set1 1111

5.13[h323]command

ThiscommandistoconfigureH.323relatedparameters.
usr/config$ h323 H.323 stack information and configuration Usage: h323 h323 [-gk ipaddress] [-multicast used] [-e164 number] [-alias h323id] [-rtp port] [-h245 port] [-ttl time] [-gkfind port] [-ras port] [-range [start num1] [end num2]] h323 -print -print Display H.323 stack information and configuration. -mode Configure as Gatekeeper mode or Peer-to-Peer mode. -gk Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255) -dfgw Default Gateway ip address. (0.0.0.0 ~ 255.255.255.255)
WellGate3804UserManual -e164 IP side registered number (phone number). -alias IP side registered H.323 alias (account name). -multi Gatekeeper auto discovery (multicast, On=1, Off=0). -rtp RTP port number (1024~65532). -h245 H.245 port number (N/A). -ttl RAS TTL time (0~3600 second). -gkfind Gatekeeper finding port (1024~65535). -gwtype Register as Gateway (1) or Terminal (0) type -ras Gatekeeper RAS port (1024~65535). -range Dynamically allocated port range (1500~65535). -respto Max waiting time for 1st response to a new call (1~200). -connto Max waiting time for call establishment after receiving 1st response of a new call (1~20000). Note: H.245 port configuration is not available now. Options -gk -e164 -alias -multi -ttl -gkfind -ras are ignored when RAS mode is configured as Peer-to-Peer mode. Example: h323 -gk 210.59.163.171 -e-alias wg3804 h323 -mode 1

ParametersUsage: print printcurrenth323relatedsettings mode alternativesforgatekeeperorpeertopeermode(0=gatekeeper mode;1=peertopeermode).Ifusersselectgatekeepermode,a extragatekeeperisneedwhenWellGate3804isinoperation. gk toassigngatekeepersIPaddresswhenWellGate3804isingatekeeper mode. dfgw tosetIPaddressofdefaultgateway,thisfunctionisthesameas MicrosoftNetMeeting. A. Toimplementthisfeaturebothendpointsmustbeunder peertopeermode. B. IftheotherendpointisFXOproducts,suchasWellGate38xx, whichHavetosetassysconf2nddial0tomakeonestage dialing. From PSTN side dial in WellGate 3804,when hearing greetingusercandialremotePSTNnumberunderdefault gateway, WellGate 3804 will automatically dial to default gateway,thendefaultgatewaywilldialthisnumbertoPSTN side. Forexample,userwantstodialfromWellGate3804Ato ext.888underWellGate3804B,useronlyhavetodial888 afterhearinggreetingofWellGate3804. C. IftheotherendpointisFXSproductssuchasWellGate35xx: FromPSTNsidedialinWellGate3804,whenhearinggreeting usercandiallinenumberofWellGate35xx. For example ,user wants to dial from WellGate 3804 to WellGate3502 theconfigurationof3502is h323line1101 line2102usercanpress101or102dialingtoline1orline2of WellGate3502afterhearinggreetingofWellGate3804. e164 e164number,whichisregisteredasphonenumberingatekeeper.
h323ID,aidentificationinh323worldforotherpartiesrecognition. Thefieldmightbeusedasakeyofauthorizationoraccountingin someVoIPapplication.Itisrecommendedtoassignaspecial name,oritmightconflictwithotherdevices. multi SwitchONorOFFgatekeeperdiscoveryfunction(1=ON;0=OFF). WhenitsON,WellGate3804willmulticastforgatekeeperif defaultgatekeeperisnotpresented. rtp toallocateRTPportrangeNOTRECOMMENDED.Thismaybeused whenRTPportrangeconflictswithFirewallpolicy. h245 toassignh.245portnumber,NOTAVAILABLEforthemoment. ttl tosettimerforTTL(TimeToLive).WellGate3804wouldsendRRQ,with keepAlive,togatekeeperperiodicallyaccordingtoTTLtimer. gkfind gatekeeperfindingport.Portnumber,whichWellGate3804usesitto discoveragatekeeper.Defaultvalueis1718. gwtype tosetWellGate3804registermodeasterminalorgateway,0as terminal1asgateway.PleasenoticethatifsetWellGate3804as terminalmode,mustsetsysconf2nddial1(referto5.12). rastosetdefaultgatekeeperRASportnumber.Defaultvalue,1719,iswell knownportforRAScommunication. range toallocatedynamicportrange,whichWellGate3804mightbeusing. respto responsetimeout.Maxwaitingtimefor1stresponsetoanewcall (1~200). connto connectiontimeout.Maxwaitingtimeforcallestablishmentafter receiving1stresponseofanewcall(1~20000).

5.14[gk]command

Thiscommandistoconfigureembeddedsimplegatekeeperrelated parameters.IfuserdoesnthaveagatekeeperorWellTechCallManager, WellGate3804provideasimpleembeddedgatekeeperforupto10 endpoints.
usr/config$ gk Gatekeeper information and configuration Usage: gk [-add type1 [[type2].]] [-delete h323] [-ttl value [-enable 0/1] [-security enable/disable] -print -enable -ttl -add Display the enabled debug flags. Enable simple gatekeeper Set TTL value Add dynamic endpoint (h323 ID, E164, IP, port, type) Delete dynamic endpoint enable Enable security check disable Disable security check add Add security record delete Delete security record
-delete -security -security -security -security Example: gk -add h192.168.1.0 gk -delete h323 gk -security delete h323

gk -security add

ParametersUsage: print printcurrentembeddedgatekeeperinformationandconfigurations. enable toenablegatekeeperfeature(gkenable0/1) ttl tosettimerforTTL(TimeToLive).Inthisperiodoftimeifendpoint doesntsendRRQtoGK,GKwilldeterminethisendpointas notexistanymoreanddeleteitfromregisteredlist. add ToaddadynamicendpointthatdoesntsendRRQtoGK.Usercan predefineanendpointinGK,andGKwilldeterminethis endpointhasalreadyregisteredtoGK,thoughitdoesnt sendregisterrequesttoGK. (gkaddH.323IDe164IPaddresssignalingport gatewaytype,0=terminal,1=gateway;ex.gkaddtest 12310.1.1.117200) delete Todeletedynamicendpointwhichuseraddedformerly.(gkdelete H.323ID) securityenable Toenablesecuritycheck.Ifthisfunctionisenabled,GKwill onlyacceptregistrationrequestfromendpoints,whichare addedwithgksecurityaddcommand. securitydisable Todisablesecuritycheck. securityadd ToaddendpointstoregistertoGKwhichenablesecuritycheck. (gksecurityaddH.323ID) securitydelete Todeleteendpointsthataddedformerlyinsecuritycheck list.(gksecuritydeleteH.323ID)

5.15[voice]command

Thevoicecommandisassociatedwiththeaudiosettinginformation. Therearefourvoicecodecs(g.729aoptional)supportedbyWellGate3804.
usr/config$ voice Voice codec setting information and configuration Usage: voice [-send [G723 ms] [G711A ms] [G711U ms] [G729A ms] ] [-volume [voice level] [input level] [dtmf level]] [-nscng G723 used] [-echo used] [-mindelay t1] [-maxdelay t2] [-optfactor f] voice -print voice -priority [G723] [G711A] [G711U] [G729A] -print Display voice codec information and configuration. -send Specify sending packet size. G.723 (30/60 ms) G.711A (20/40/60 ms) G.711U (20/40/60 ms) G.729A (20/40/60 ms) -priority Priority preference of installed codecs. G.723 G.711A G.711U G.729A -volume Specify the following levels: voice volume (0~63, default: 28), input gain (0~63, default: 28), dtmf volume (0~31, default: 23),

S/Wversion:4fxo.115 WellGate3804UserManual Releaseversion,:2.4 -nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0). -echo Setting of echo canceller. (On=1, Off=0, per port basis). -mindelay Setting of jitter buffer min delay. (0~150, default: 100). -maxdelay Setting of jitter buffer max delay. (0~150, default: 150). Example: voice -send gg711a 60 g711u 60 g729a 60 voice -volume voice 20 input 32 dtmf 27 voice -echo 1 1
ParametersUsage: print printcurrentvoiceinformationandconfigurations. send todefinepacketsizeforeachcodec.20/40/60msmeanstosend avoicepacketper20/40/60milliseconds.Thesmallerthepacket size,theshorterthedelaytime.Ifnetworkisingoodcondition, smallersendingpacketsizeisrecommended.Inthisparameter, 20/40/60msisapplicabletoG.711u/alaw,andG.729acodec, while30/60msisapplicabletoG.723.1codec. priority codecprioritywhilenegotiatingwithotherh323device.This parameterdeterminesthelistedsequenceinh.245TCS message.Thecodeclistedinleftsidehasthehighestpriority whenbothpartiesdeterminingfinalcodec. volume Therearethreeadjustablevalue.voicevolumestandsforvolume, whichcanbeheardfromWellGate3804side;inputgainstands forvolume,whichtheoppositepartyhears.dtmfvolumestands forDTMFvolume/level,whichsendstoitsownLine1orLine2. nscng silencesuppressionandcomfortnoisegenerationsetting(1=ON;0 =OFF).ItisapplicabletoG.723codeconly.Anexampleis demonstratedbelow:
usr/config$ voice -nscng g723 1
mindelay theminimumjitterbuffersize.(Defaultvalue=90ms) maxdelay theminimumjitterbuffersize.(Defaultvalue=150ms)
usr/config$ voice mindelay 90 maxdelay 150 -optfacor 7
activateeachcanceller(1=ON;0=OFF).
Note:besuretoknowwelltheapplicationbeforeyouchangevoice parametersbecausethismightcauseincompatibility.

5.16[tos]command

TOSserviceallowsuserstoachieveQoSonIPnetwork.
usr/config$ tos IP Packet ToS(type of Service)information and configuration Usage: tos [-rtptype precedence]
WellGate3804UserManual [-rtpdelay mode] [-rtpthruput mode] [-rtpreliab mode] tos -print [-sigtype]|[-rtptype]|[-rtcptype] 0 routine. 1 priority. 2 immediate. 3 flash. 4 flash override. 5 critic. 6 internet control. 7 network control. [-sigdelay]|[-rtpdelay]|[-rtcpdelay] 0 normal delay. 1 low delay. [-sigthruput]|[-rtpthruput]|[-rtcpthruput] 0 normal throughput. 1 high throughput. [-sigreliab]|[-rtpreliab]|[-rtcpreliab] 0 normal reliability. 1 high reliability. Example: tos -rtptype 7 -rtpdelay 0 -rtpthruput 0 -rtpreliab 0
ParameterUsages: print:displaycurrentTOSvaluesconfigurations. sigtype configureTOStypeofsignalingpacketsfrom0to7 rtptype configureTOStypeofRTPpacketsfrom0to7 rtcptypeconfigureTOStypeofRTCPpacketsfrom0to7 sigdelayconfiguresignalingpacketsasnormaldelayorlowdelay rtpdelay configureRTPpacketsasnormaldelayorlowdelay rtcpdelay configureRTCPpacketsasnormaldelayorlowdelay sigthruput configuresignalingpacketsasnormalthroughputorhigh throughput rtpthruput configureRTPpacketsasnormalthroughputorhigh throughput rtcpthruput configureRTCPpacketsasnormalthroughputorhigh throughput sigreliab configuresignalingpacketsasnormalreliabilityorhigh reliability rtpreliabconfigureRTPpacketsasnormalreliabilityorhighreliability rtcpreliabconfigureRTCPpacketsasnormalreliabilityorhighreliability Note:UsersshouldbeawarethatTOSiseffectiveonlywhennetworkdevices (forex:router,switch.etc.)supportTOS.

ParameterUsages: print:displaycurrentgroupinginformation enable:enablegroupingfunction disable:disablegroupingfunction number:sethowmanygroupswillbedivided pattern:sethowmanymembersineachgroup e164:sete164ofeachgroup Forex:ifusersneedtodivideWellGate3804into2groups(L1inthe1st group,andL2inthe2ndgroup),andhavethemregistertogatekeeper separately(e164=100for1stgroup;e164=200for2ndgroup).Theyhavetouse thefollowingcommand:
usr/config$ group pattern e200
Note: GROUP function is effective only in gatekeeper mode.

5.20[bureau]command

Typebureautodisplaythecommandusage.
usr/config$ bureau Bureau line setting information and configuration Usage: bureau [-pstn number] [-hold used] [-table [Port DestIP TELnum]] bureau -print -print -pstn -hold Display Bureau line informatio and configuration. PSTN number (per port basis). This number is used to display as a caller ID when the caller ID is not available. The maximum digit length is 32. Specify the hold tone generation (using PCM file). (On/Off) Setting value (On=1, Off=0). Set Hot line/Line To Line information. (Port range: 1~2)
-table Note: Hotline feature should be used together with: $sysconf -service 2 (HotLine service) $sysconf -2nddial 0 (2nddial off) $h323 -mode 1 (peer-to-peer mode) Line To Line feature should be used together with: $sysconf -service 2 (HotLine service/Line To Line ) $sysconf -2nddial 1 (2nddial on) $h323 -mode 1 (peer-to-peer mode) Example: bureau -pstn bureau -table 1 192.168.4.2 192.168.4.200 9992
ParameterUsages: print:displaybureaulineinformationandconfiguration.
usr/config$ bureau -print Bureau line setting relate information PSTN number : Hold tone generation : On Hot line / Line to Line table ================================================= ==== Port Destination Address Remote TEL/CHANNEL -------------------------------------------------------------------------------------------------1 192.168.4.2 192.168.4.================================================= =====
pstn:PSTNnumber(perportbasis).Thisnumberisusedtodisplayasa callerIDwhenthecallerIDisnotavailable.Themaximumdigitlength is32. hold:whiletheterminalssupportH.450holdfunction,theWellGate3804will playtheholdtonetoPSTNside. table:SetHotline/LineToLinedestinationIPande164numbersinformation. (Portrange:1~2)
Note: 1.HotLineandLineToLinefunctionsareusingthesametable. 2.InHotLineservice,userhavetosetNo.preparedtodialout;inLineToLine service,userhavetosetportNo. Forexample,ifusersetbureautable1192.168.4.69628inhotlineservice, afteruserdialinWellGate3804port1,WellGate3804willdirectdialto 192.168.4.69anddial628toPSTNside,thenPhone628willring,userwill hearringbacktone. Ifusersetbureautable1192.168.4.691inLineToLineservice,afteruser dialinWellGate3804port1,WellGate3804willdirectdialto192.168.4.69 port1,userwillheardialtone,thenusercandialoutNo.toPSTNside.