Reviews & Opinions
Independent and trusted. Read before buy Westell 327W!

Westell 327W

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Westell 327W, size: 6.0 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Westell 327WAbout Westell 327W
Here you can find all about Westell 327W like manual and other informations. For example: port forwarding, bridge mode, router, firmware update, password, ip address, firmware, setup, default password.

Westell 327W manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Westell 327W please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Westell 327W photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
ikman 9:38pm on Thursday, July 22nd, 2010 
Short and sweet I have been on Verizon for 2 years & have the verizon version of this product & have had no trouble. I play FPS games & have no prob. excellent I used the router for 2 years and it worked perfectly. Reliable, Fast, Easy to setup, Multi-functional I am Novel CNE, Microsoft MCSE for 15 years. This router is free from Verizon DSL for my home DSl.
Nickrus 4:51pm on Thursday, April 29th, 2010 
Good Deal Surprised at how long it took to for delivery, But It does work as well as i had hoped.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Westell
VERSALINK GATEWAY (MODEL 327W)

Quick Start Guide

030-300391 Rev. A

May 2004

Westell, Inc. Quick Start Guide

Congratulations!

You are on your way to experiencing the Internet with DSL at speeds significantly faster than traditional modems. With your purchase of the Westell VersaLink Gateway, you will also enjoy the following features: Always-on connection Multiple users can share the connection using Wireless IEEE 802.11b/g/g+ and Ethernet connections.
Follow the steps in this Quick Start Guide and get online fast! Before you begin, check the package contents to ensure that all components are included.
NOTE: Internet service provider subscriber software and connection requirements may vary. Consult your Internet service provider for installation instructions. Please wait until you have received notification from your service provider that your DSL line has been activated before installing the Westell VersaLink Gateway and software.
Before you begin: Make sure that your kit contains the following items. Westell Versa Link Gateway Power Supply RJ-45 Ethernet cable (straight-through) (yellow) RJ-11 Phone cable SMA Antenna Westell CD-ROM containing User Guide in PDF format Quick Start Guide

Networking Requirements

Connection Type Minimum System Requirements

ETHERNET

WIRELESS IEEE 802.11g

Pentium or equivalent and above class machines, Macintosh Microsoft Windows (95, 98, 2000, ME, NT 4.0, or XP), Macintosh OS X, or Linux installed Computer Operating System CD-ROM on hand Internet Explorer 4.x or Netscape Navigator 4.x or higher 64 MB RAM (128 MB recommended) 10 MB of free hard drive space TCP/IP Protocol stack installed 10/100 Base-T Network Interface Card (NIC) Pentium or equivalent and above class machines Microsoft Windows (98, ME, 2000, or XP) or Macintosh OS X installed Computer Operating System CD-ROM on hand Internet Explorer 4.x or Netscape Navigator 4.x or higher 64 MB RAM (128 MB recommended) 10 MB of free hard drive space An available IEEE 802.11b/g/g+ PC adapter
INSTALLING THE MICROFILTERS
If your DSL service shares the same line as your fax machine or telephone, you need to install a filter. Please follow the installation procedure in this section, and be sure to install one filter on every phone line that has a telephone, answering machine, or fax machine.
Connect a DSL filter to standard telephone equipment: 1. Plug the short cord that is attached to the DSL filter into the phone jack on the wall plate. Plug the standard telephone cable from the telephone device into the jack of the DSL filter where it is labeled PHONE.
Note: Repeat these steps for each telephone. However, DO NOT place a microfilter on the DSL cord that is used to connect the Router to the wall jack.
Connect a microfilter to telephone equipment and DSL equipment that share the same wall jack: 1. Plug the short cord that is attached to the DSL filter into the phone jack on the wall plate. Plug the standard telephone cable from the telephone device into the jack of the DSL filter where it is labeled PHONE.
Plug one end of the DSL phone cable (that you received in the microfilter kit) into the DSL filter where it is labeled HPN.
Plug the other end of the DSL phone cable into the DSL Line jack located on the rear panel of the Router.

INSTALLING VERSALINK

This section explains the procedures for installing VersaLink. You may choose to install VersaLink in one of three ways: Ethernet only, Wireless only, or both Ethernet and Wireless simultaneously. To install VersaLink via 10/100 Base-T Ethernet only, refer to section 2A. To install VersaLink via Wireless only, refer to section 2B. If you want to install VersaLink via Ethernet and Wireless ports simultaneously, refer to section 2C.
NOTE: If you are using VersaLink in conjunction with an Ethernet Hub or Switch, refer to the manufacturers instructions for proper installation and configuration. When using a Microfilter, be certain that the DSL phone cable is connected to the DSL/HPN non-filtered jack. Westell recommends the use of a surge suppressor to protect equipment attached to the AC power supply. When using the optional uplink port (E1), Ethernet LAN connection is limited to E2, E3, and E4. The UPLINK feature is optional, and if UPLINK is not enabled in the.ini file, the Router will use DSL and Wireless only.
2A. Installation via 10/100 Base-T/Ethernet Connections
NOTE: Before you connect via 10/100 Base-T, you must have an available Ethernet card installed in your computer. If your Ethernet card does not auto-negotiate, you must set it to half duplex. Refer to the Ethernet card manufacturers instructions for installing and configuring your Ethernet card.
Connect the power supply cord to the power connector marked DC 9V on the rear panel of VersaLink. Plug the other end of the power supply into a wall socket. Connect the DSL phone cable from the jack marked on the rear panel of VersaLink to the DSL-equipped telephone line jack on the wall. IMPORTANT: Do not use a DSL filter on this connection. You must use the phone cord that was provided with the kit. Connect the yellow Ethernet cable from any one of the Ethernet jacks marked on the rear panel of VersaLink to the Ethernet port on your computer. Repeat this step to connect up to three additional PCs to VersaLink.
NOTE: You may connect to any of the four Ethernet jacks on the rear panel of VersaLink as they serve as an Ethernet switch.
Check to see if the DSL LED is solid green. If the DSL LED is solid green, VersaLink is functioning properly.
Check to see if the Ethernet LED is solid green. Solid green indicates that the Ethernet connection is functioning properly.
Congratulations! You have completed the Ethernet hardware installation. No software installation is required when using only an Ethernet connection. You must now proceed to section 3 for instructions on accessing VersaLink.
Figure 1. Connection via 10/100 Base-T/Ethernet
2B. Installation via Wireless IMPORTANT: If you are connecting to VersaLink via a wireless network adapter, the service set ID (SSID) must be the same for both VersaLink and your PCs wireless network adapter. The default SSID for VersaLink is the serial number of the unit (located below the bar code on the bottom of the unit and also on the Westell shipping carton). Locate and run the utility software provided with your PCs Wireless network adapter and enter the SSID value. The PCs wireless network adapter must be configured with the SSID (in order to communicate with VersaLink) before you begin the account setup and configuration procedures. Later, for privacy you can change the SSID by following the procedures outlined in the Wireless Configuration section of the User Guide provided with your kit. NOTE: Client PCs can use any Wireless Fidelity (Wi-Fi) 802.11b/g/g+ certified card to communicate with VersaLink. The Wireless card and VersaLink must use the same Wired Equivalent Privacy (WEP) security code type. The factory default for WEP is DISABLED. If you enable WEP, you must ensure the network setting for your wireless adapter is set to Must Use Shared Key for WEP or Open Wi-Fi. You must ensure that your PCs Wi-Fi adapter is configured properly for whichever network setting you use. You can access the settings in the advanced properties of the wireless network adapter.

To network VersaLink to additional computers in your home or office using a wireless installation, you will need to confirm the following:

1. 2. 3. 4.

Ensure that an 802.11b/g/g+ wireless network adapter has been installed in each PC on your wireless network. Install the appropriate drivers for your Wireless IEEE802.11b or IEEE802.11g adapter. Make sure the SMA antenna connector is loose. Orient the antenna in the proper configuration. Then, tighten the antenna knob to lock it into place. Connect the power supply cord to the power connector marked DC 9V on the rear panel of VersaLink. Plug the other end of the power supply into a wall socket. Connect the DSL phone cable from the connector marked on the rear panel of VersaLink to the DSL-equipped telephone line jack on the wall. IMPORTANT: Do not use a DSL filter on this connection. You must use the phone cord that was provided with the kit. Check to see if the DSL LED is solid green. If the DSL LED is solid green, VersaLink is functioning properly. Check to see if VersaLinks Wireless LED is solid Green. This means that the Wireless interface is functioning properly.
Congratulations! You have completed the Wireless installation VersaLink. You must now proceed to section 3 for instructions on accessing VersaLink.
Figure 2. Connection via Wireless
2C. Ethernet, Wireless, Combination Hardware Installation VersaLink supports simultaneous use of 10/100 Base-T Ethernet and Wireless IEEE 802.11b/g ports. The following instructions explain how to install VersaLink for simultaneous use of Ethernet and Wireless ports.
NOTE: Refer to Figure 1 and Figure 2 for illustrations on hardware installation via Ethernet and Wireless connections, respectively.
Ensure that an 802.11b/g/g+ wireless network adapter has been installed in each PC on your wireless network Install the appropriate drivers for your Wireless IEEE802.11b or IEEE802.11g adapter. Make sure the SMA antenna connector is loose. Orient the antenna in the proper configuration. Then, tighten the antenna knob to lock it into place. The Connect the power supply cord to the power connector marked DC 9V on the rear panel of VersaLink. Plug the other end of the power supply into a wall socket. Connect the DSL phone cable from connector marked on the rear panel of VersaLink to the DSL-equipped telephone line jack on the wall. IMPORTANT: Do not use a DSL filter on this connection. You must use the phone cord that was provided with the kit. Connect the yellow Ethernet cable from any one of the Ethernet jacks marked on the rear panel of VersaLink to the Ethernet port on your

computer. Repeat this step to connect up to three additional PCs to VersaLink.

7. 8. 9.

Check to see if the DSL LED is solid green. If the DSL LED is solid green, VersaLink is functioning properly. Check to see if the Ethernet LED is solid green. Solid green indicates the Ethernet connection is functioning properly. Check to see if VersaLinks Wireless LED is solid Green. This means that the Wireless interface is functioning properly.
Congratulations! You have completed the simultaneous hardware (Ethernet and Wireless) installation. You must now proceed to section 3 for instructions on accessing VersaLink.

ACCESSING VERSALINK

Before you can browse the Internet using VersaLink, you must perform the following steps.
Access VersaLink by clicking on your web browser. Next, type either http://dslrouter or http://192.168.1.1 in the web browsers address window and press Enter on your keyboard. Follow the instructions in the screens to set up your account profile.
NOTE: If you need further instructions during your Account Setup, refer to section 7, Configuring VersaLink for Internet Connection of the User Guide, which is located on the Westell CD-ROM that you received with your kit.
PUBLICATION INFORMATION Westell VersaLink Gateway (Model 327W) Quick Start Part No. 030-300391 Rev. A 2004 Westell, Inc. All rights reserved. Westell, Inc. 750 North Commons Drive Aurora, Illinois 60504 USA www.westell.com All trademarks and registered trademarks are the property of their respective owners.

 

Tags

Kxtg6441 DXZ858RMP Firmware DMC-FZ1 HD7446 Omnia N85-1 29PT5408 C6500E Bridge Mode Server Fo-p610 TDS 700D KX-TM150B EZ-EG Of Evil RM318 Liebherr SGN DR-5010C 42LG5000 AEK DCR-SC100 Blackjack II 9 D Gate 2 4 0 RXV 450 DV-585K-S MIO 200 S12AHP S40 VR-5080 ICF-C630 WD-J63B LA32C450e1 - 2003 Router Information Asko T700 Officejet 6300 RF265abbp XAA Bluetooth-headset H700 EX1920W DVD-V7600K 17-inch TX119 SGH-T201G MX7600 Grandam 1997 NAS 440 Chaos PSR-6700 FE2514N1 W1250 DSP-Z9 PS-460 Password Alcatel 4400 PV-GS29 KD-200Z 190TW9FB CDE-9846 Wars-rebellion 550 Live A-905X Nokia 3125 Ip Address Sweeper KX-TCD210G MT-4X Elna CE20 Grinder CDX-R3300S FAX-200 21HS-50H LC-46DH77E Doro 133R NAV210W 2490B Presets Port Forwarding C652DS LE26C450e1W Firmware Update KX-TD816 CLX-6240FX XET VGN-FW41zj H RD-XV47KE MD 9945 WHR-G125 TC-14S2R G2739N-S LP650 BG 19 Default Password CW-21Z503N LT412 Citroen AX Setup E2020X Max Hpdi Roland RV-5 TH-42PX81FV JD-VD501 DT-587MC 160 A Casio 4732 AVR 225 URC-F17 Lite-2007 Asko 1585

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101